sdk-toolchain-GNU-ARM-Embedded/share/doc/info/cpp.info

This is cpp.info, produced by makeinfo version 6.6 from cpp.texi.

Copyright (C) 1987-2019 Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation.  A copy of
the license is included in the section entitled "GNU Free Documentation
License".

   This manual contains no Invariant Sections.  The Front-Cover Texts
are (a) (see below), and the Back-Cover Texts are (b) (see below).

   (a) The FSF's Front-Cover Text is:

   A GNU Manual

   (b) The FSF's Back-Cover Text is:

   You have freedom to copy and modify this GNU Manual, like GNU
software.  Copies published by the Free Software Foundation raise funds
for GNU development.
INFO-DIR-SECTION Software development
START-INFO-DIR-ENTRY
* Cpp: (cpp).                  The GNU C preprocessor.
END-INFO-DIR-ENTRY


File: cpp.info,  Node: Top,  Next: Overview,  Up: (dir)

The C Preprocessor
******************

The C preprocessor implements the macro language used to transform C,
C++, and Objective-C programs before they are compiled.  It can also be
useful on its own.

* Menu:

* Overview::
* Header Files::
* Macros::
* Conditionals::
* Diagnostics::
* Line Control::
* Pragmas::
* Other Directives::
* Preprocessor Output::
* Traditional Mode::
* Implementation Details::
* Invocation::
* Environment Variables::
* GNU Free Documentation License::
* Index of Directives::
* Option Index::
* Concept Index::

 -- The Detailed Node Listing --

Overview

* Character sets::
* Initial processing::
* Tokenization::
* The preprocessing language::

Header Files

* Include Syntax::
* Include Operation::
* Search Path::
* Once-Only Headers::
* Alternatives to Wrapper #ifndef::
* Computed Includes::
* Wrapper Headers::
* System Headers::

Macros

* Object-like Macros::
* Function-like Macros::
* Macro Arguments::
* Stringizing::
* Concatenation::
* Variadic Macros::
* Predefined Macros::
* Undefining and Redefining Macros::
* Directives Within Macro Arguments::
* Macro Pitfalls::

Predefined Macros

* Standard Predefined Macros::
* Common Predefined Macros::
* System-specific Predefined Macros::
* C++ Named Operators::

Macro Pitfalls

* Misnesting::
* Operator Precedence Problems::
* Swallowing the Semicolon::
* Duplication of Side Effects::
* Self-Referential Macros::
* Argument Prescan::
* Newlines in Arguments::

Conditionals

* Conditional Uses::
* Conditional Syntax::
* Deleted Code::

Conditional Syntax

* Ifdef::
* If::
* Defined::
* Else::
* Elif::

Implementation Details

* Implementation-defined behavior::
* Implementation limits::
* Obsolete Features::

Obsolete Features

* Obsolete Features::


   Copyright (C) 1987-2019 Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation.  A copy of
the license is included in the section entitled "GNU Free Documentation
License".

   This manual contains no Invariant Sections.  The Front-Cover Texts
are (a) (see below), and the Back-Cover Texts are (b) (see below).

   (a) The FSF's Front-Cover Text is:

   A GNU Manual

   (b) The FSF's Back-Cover Text is:

   You have freedom to copy and modify this GNU Manual, like GNU
software.  Copies published by the Free Software Foundation raise funds
for GNU development.


File: cpp.info,  Node: Overview,  Next: Header Files,  Prev: Top,  Up: Top

1 Overview
**********

The C preprocessor, often known as "cpp", is a "macro processor" that is
used automatically by the C compiler to transform your program before
compilation.  It is called a macro processor because it allows you to
define "macros", which are brief abbreviations for longer constructs.

   The C preprocessor is intended to be used only with C, C++, and
Objective-C source code.  In the past, it has been abused as a general
text processor.  It will choke on input which does not obey C's lexical
rules.  For example, apostrophes will be interpreted as the beginning of
character constants, and cause errors.  Also, you cannot rely on it
preserving characteristics of the input which are not significant to
C-family languages.  If a Makefile is preprocessed, all the hard tabs
will be removed, and the Makefile will not work.

   Having said that, you can often get away with using cpp on things
which are not C.  Other Algol-ish programming languages are often safe
(Ada, etc.)  So is assembly, with caution.  '-traditional-cpp' mode
preserves more white space, and is otherwise more permissive.  Many of
the problems can be avoided by writing C or C++ style comments instead
of native language comments, and keeping macros simple.

   Wherever possible, you should use a preprocessor geared to the
language you are writing in.  Modern versions of the GNU assembler have
macro facilities.  Most high level programming languages have their own
conditional compilation and inclusion mechanism.  If all else fails, try
a true general text processor, such as GNU M4.

   C preprocessors vary in some details.  This manual discusses the GNU
C preprocessor, which provides a small superset of the features of ISO
Standard C.  In its default mode, the GNU C preprocessor does not do a
few things required by the standard.  These are features which are
rarely, if ever, used, and may cause surprising changes to the meaning
of a program which does not expect them.  To get strict ISO Standard C,
you should use the '-std=c90', '-std=c99', '-std=c11' or '-std=c17'
options, depending on which version of the standard you want.  To get
all the mandatory diagnostics, you must also use '-pedantic'.  *Note
Invocation::.

   This manual describes the behavior of the ISO preprocessor.  To
minimize gratuitous differences, where the ISO preprocessor's behavior
does not conflict with traditional semantics, the traditional
preprocessor should behave the same way.  The various differences that
do exist are detailed in the section *note Traditional Mode::.

   For clarity, unless noted otherwise, references to 'CPP' in this
manual refer to GNU CPP.

* Menu:

* Character sets::
* Initial processing::
* Tokenization::
* The preprocessing language::


File: cpp.info,  Node: Character sets,  Next: Initial processing,  Up: Overview

1.1 Character sets
==================

Source code character set processing in C and related languages is
rather complicated.  The C standard discusses two character sets, but
there are really at least four.

   The files input to CPP might be in any character set at all.  CPP's
very first action, before it even looks for line boundaries, is to
convert the file into the character set it uses for internal processing.
That set is what the C standard calls the "source" character set.  It
must be isomorphic with ISO 10646, also known as Unicode.  CPP uses the
UTF-8 encoding of Unicode.

   The character sets of the input files are specified using the
'-finput-charset=' option.

   All preprocessing work (the subject of the rest of this manual) is
carried out in the source character set.  If you request textual output
from the preprocessor with the '-E' option, it will be in UTF-8.

   After preprocessing is complete, string and character constants are
converted again, into the "execution" character set.  This character set
is under control of the user; the default is UTF-8, matching the source
character set.  Wide string and character constants have their own
character set, which is not called out specifically in the standard.
Again, it is under control of the user.  The default is UTF-16 or
UTF-32, whichever fits in the target's 'wchar_t' type, in the target
machine's byte order.(1)  Octal and hexadecimal escape sequences do not
undergo conversion; '\x12' has the value 0x12 regardless of the
currently selected execution character set.  All other escapes are
replaced by the character in the source character set that they
represent, then converted to the execution character set, just like
unescaped characters.

   In identifiers, characters outside the ASCII range can only be
specified with the '\u' and '\U' escapes, not used directly.  If strict
ISO C90 conformance is specified with an option such as '-std=c90', or
'-fno-extended-identifiers' is used, then those escapes are not
permitted in identifiers.

   ---------- Footnotes ----------

   (1) UTF-16 does not meet the requirements of the C standard for a
wide character set, but the choice of 16-bit 'wchar_t' is enshrined in
some system ABIs so we cannot fix this.


File: cpp.info,  Node: Initial processing,  Next: Tokenization,  Prev: Character sets,  Up: Overview

1.2 Initial processing
======================

The preprocessor performs a series of textual transformations on its
input.  These happen before all other processing.  Conceptually, they
happen in a rigid order, and the entire file is run through each
transformation before the next one begins.  CPP actually does them all
at once, for performance reasons.  These transformations correspond
roughly to the first three "phases of translation" described in the C
standard.

  1. The input file is read into memory and broken into lines.

     Different systems use different conventions to indicate the end of
     a line.  GCC accepts the ASCII control sequences 'LF', 'CR LF' and
     'CR' as end-of-line markers.  These are the canonical sequences
     used by Unix, DOS and VMS, and the classic Mac OS (before OSX)
     respectively.  You may therefore safely copy source code written on
     any of those systems to a different one and use it without
     conversion.  (GCC may lose track of the current line number if a
     file doesn't consistently use one convention, as sometimes happens
     when it is edited on computers with different conventions that
     share a network file system.)

     If the last line of any input file lacks an end-of-line marker, the
     end of the file is considered to implicitly supply one.  The C
     standard says that this condition provokes undefined behavior, so
     GCC will emit a warning message.

  2. If trigraphs are enabled, they are replaced by their corresponding
     single characters.  By default GCC ignores trigraphs, but if you
     request a strictly conforming mode with the '-std' option, or you
     specify the '-trigraphs' option, then it converts them.

     These are nine three-character sequences, all starting with '??',
     that are defined by ISO C to stand for single characters.  They
     permit obsolete systems that lack some of C's punctuation to use C.
     For example, '??/' stands for '\', so '??/n' is a character
     constant for a newline.

     Trigraphs are not popular and many compilers implement them
     incorrectly.  Portable code should not rely on trigraphs being
     either converted or ignored.  With '-Wtrigraphs' GCC will warn you
     when a trigraph may change the meaning of your program if it were
     converted.  *Note Wtrigraphs::.

     In a string constant, you can prevent a sequence of question marks
     from being confused with a trigraph by inserting a backslash
     between the question marks, or by separating the string literal at
     the trigraph and making use of string literal concatenation.
     "(??\?)" is the string '(???)', not '(?]'.  Traditional C compilers
     do not recognize these idioms.

     The nine trigraphs and their replacements are

          Trigraph:       ??(  ??)  ??<  ??>  ??=  ??/  ??'  ??!  ??-
          Replacement:      [    ]    {    }    #    \    ^    |    ~

  3. Continued lines are merged into one long line.

     A continued line is a line which ends with a backslash, '\'.  The
     backslash is removed and the following line is joined with the
     current one.  No space is inserted, so you may split a line
     anywhere, even in the middle of a word.  (It is generally more
     readable to split lines only at white space.)

     The trailing backslash on a continued line is commonly referred to
     as a "backslash-newline".

     If there is white space between a backslash and the end of a line,
     that is still a continued line.  However, as this is usually the
     result of an editing mistake, and many compilers will not accept it
     as a continued line, GCC will warn you about it.

  4. All comments are replaced with single spaces.

     There are two kinds of comments.  "Block comments" begin with '/*'
     and continue until the next '*/'.  Block comments do not nest:

          /* this is /* one comment */ text outside comment

     "Line comments" begin with '//' and continue to the end of the
     current line.  Line comments do not nest either, but it does not
     matter, because they would end in the same place anyway.

          // this is // one comment
          text outside comment

   It is safe to put line comments inside block comments, or vice versa.

     /* block comment
        // contains line comment
        yet more comment
      */ outside comment

     // line comment /* contains block comment */

   But beware of commenting out one end of a block comment with a line
comment.

      // l.c.  /* block comment begins
         oops! this isn't a comment anymore */

   Comments are not recognized within string literals.  "/* blah */" is
the string constant '/* blah */', not an empty string.

   Line comments are not in the 1989 edition of the C standard, but they
are recognized by GCC as an extension.  In C++ and in the 1999 edition
of the C standard, they are an official part of the language.

   Since these transformations happen before all other processing, you
can split a line mechanically with backslash-newline anywhere.  You can
comment out the end of a line.  You can continue a line comment onto the
next line with backslash-newline.  You can even split '/*', '*/', and
'//' onto multiple lines with backslash-newline.  For example:

     /\
     *
     */ # /*
     */ defi\
     ne FO\
     O 10\
     20

is equivalent to '#define FOO 1020'.  All these tricks are extremely
confusing and should not be used in code intended to be readable.

   There is no way to prevent a backslash at the end of a line from
being interpreted as a backslash-newline.  This cannot affect any
correct program, however.


File: cpp.info,  Node: Tokenization,  Next: The preprocessing language,  Prev: Initial processing,  Up: Overview

1.3 Tokenization
================

After the textual transformations are finished, the input file is
converted into a sequence of "preprocessing tokens".  These mostly
correspond to the syntactic tokens used by the C compiler, but there are
a few differences.  White space separates tokens; it is not itself a
token of any kind.  Tokens do not have to be separated by white space,
but it is often necessary to avoid ambiguities.

   When faced with a sequence of characters that has more than one
possible tokenization, the preprocessor is greedy.  It always makes each
token, starting from the left, as big as possible before moving on to
the next token.  For instance, 'a+++++b' is interpreted as
'a ++ ++ + b', not as 'a ++ + ++ b', even though the latter tokenization
could be part of a valid C program and the former could not.

   Once the input file is broken into tokens, the token boundaries never
change, except when the '##' preprocessing operator is used to paste
tokens together.  *Note Concatenation::.  For example,

     #define foo() bar
     foo()baz
          ==> bar baz
     _not_
          ==> barbaz

   The compiler does not re-tokenize the preprocessor's output.  Each
preprocessing token becomes one compiler token.

   Preprocessing tokens fall into five broad classes: identifiers,
preprocessing numbers, string literals, punctuators, and other.  An
"identifier" is the same as an identifier in C: any sequence of letters,
digits, or underscores, which begins with a letter or underscore.
Keywords of C have no significance to the preprocessor; they are
ordinary identifiers.  You can define a macro whose name is a keyword,
for instance.  The only identifier which can be considered a
preprocessing keyword is 'defined'.  *Note Defined::.

   This is mostly true of other languages which use the C preprocessor.
However, a few of the keywords of C++ are significant even in the
preprocessor.  *Note C++ Named Operators::.

   In the 1999 C standard, identifiers may contain letters which are not
part of the "basic source character set", at the implementation's
discretion (such as accented Latin letters, Greek letters, or Chinese
ideograms).  This may be done with an extended character set, or the
'\u' and '\U' escape sequences.  GCC only accepts such characters in the
'\u' and '\U' forms.

   As an extension, GCC treats '$' as a letter.  This is for
compatibility with some systems, such as VMS, where '$' is commonly used
in system-defined function and object names.  '$' is not a letter in
strictly conforming mode, or if you specify the '-$' option.  *Note
Invocation::.

   A "preprocessing number" has a rather bizarre definition.  The
category includes all the normal integer and floating point constants
one expects of C, but also a number of other things one might not
initially recognize as a number.  Formally, preprocessing numbers begin
with an optional period, a required decimal digit, and then continue
with any sequence of letters, digits, underscores, periods, and
exponents.  Exponents are the two-character sequences 'e+', 'e-', 'E+',
'E-', 'p+', 'p-', 'P+', and 'P-'.  (The exponents that begin with 'p' or
'P' are used for hexadecimal floating-point constants.)

   The purpose of this unusual definition is to isolate the preprocessor
from the full complexity of numeric constants.  It does not have to
distinguish between lexically valid and invalid floating-point numbers,
which is complicated.  The definition also permits you to split an
identifier at any position and get exactly two tokens, which can then be
pasted back together with the '##' operator.

   It's possible for preprocessing numbers to cause programs to be
misinterpreted.  For example, '0xE+12' is a preprocessing number which
does not translate to any valid numeric constant, therefore a syntax
error.  It does not mean '0xE + 12', which is what you might have
intended.

   "String literals" are string constants, character constants, and
header file names (the argument of '#include').(1)  String constants and
character constants are straightforward: "..." or '...'.  In either case
embedded quotes should be escaped with a backslash: '\'' is the
character constant for '''.  There is no limit on the length of a
character constant, but the value of a character constant that contains
more than one character is implementation-defined.  *Note Implementation
Details::.

   Header file names either look like string constants, "...", or are
written with angle brackets instead, <...>.  In either case, backslash
is an ordinary character.  There is no way to escape the closing quote
or angle bracket.  The preprocessor looks for the header file in
different places depending on which form you use.  *Note Include
Operation::.

   No string literal may extend past the end of a line.  You may use
continued lines instead, or string constant concatenation.

   "Punctuators" are all the usual bits of punctuation which are
meaningful to C and C++.  All but three of the punctuation characters in
ASCII are C punctuators.  The exceptions are '@', '$', and '`'.  In
addition, all the two- and three-character operators are punctuators.
There are also six "digraphs", which the C++ standard calls "alternative
tokens", which are merely alternate ways to spell other punctuators.
This is a second attempt to work around missing punctuation in obsolete
systems.  It has no negative side effects, unlike trigraphs, but does
not cover as much ground.  The digraphs and their corresponding normal
punctuators are:

     Digraph:        <%  %>  <:  :>  %:  %:%:
     Punctuator:      {   }   [   ]   #    ##

   Any other single character is considered "other".  It is passed on to
the preprocessor's output unmolested.  The C compiler will almost
certainly reject source code containing "other" tokens.  In ASCII, the
only other characters are '@', '$', '`', and control characters other
than NUL (all bits zero).  (Note that '$' is normally considered a
letter.)  All characters with the high bit set (numeric range 0x7F-0xFF)
are also "other" in the present implementation.  This will change when
proper support for international character sets is added to GCC.

   NUL is a special case because of the high probability that its
appearance is accidental, and because it may be invisible to the user
(many terminals do not display NUL at all).  Within comments, NULs are
silently ignored, just as any other character would be.  In running
text, NUL is considered white space.  For example, these two directives
have the same meaning.

     #define X^@1
     #define X 1

(where '^@' is ASCII NUL).  Within string or character constants, NULs
are preserved.  In the latter two cases the preprocessor emits a warning
message.

   ---------- Footnotes ----------

   (1) The C standard uses the term "string literal" to refer only to
what we are calling "string constants".


File: cpp.info,  Node: The preprocessing language,  Prev: Tokenization,  Up: Overview

1.4 The preprocessing language
==============================

After tokenization, the stream of tokens may simply be passed straight
to the compiler's parser.  However, if it contains any operations in the
"preprocessing language", it will be transformed first.  This stage
corresponds roughly to the standard's "translation phase 4" and is what
most people think of as the preprocessor's job.

   The preprocessing language consists of "directives" to be executed
and "macros" to be expanded.  Its primary capabilities are:

   * Inclusion of header files.  These are files of declarations that
     can be substituted into your program.

   * Macro expansion.  You can define "macros", which are abbreviations
     for arbitrary fragments of C code.  The preprocessor will replace
     the macros with their definitions throughout the program.  Some
     macros are automatically defined for you.

   * Conditional compilation.  You can include or exclude parts of the
     program according to various conditions.

   * Line control.  If you use a program to combine or rearrange source
     files into an intermediate file which is then compiled, you can use
     line control to inform the compiler where each source line
     originally came from.

   * Diagnostics.  You can detect problems at compile time and issue
     errors or warnings.

   There are a few more, less useful, features.

   Except for expansion of predefined macros, all these operations are
triggered with "preprocessing directives".  Preprocessing directives are
lines in your program that start with '#'.  Whitespace is allowed before
and after the '#'.  The '#' is followed by an identifier, the "directive
name".  It specifies the operation to perform.  Directives are commonly
referred to as '#NAME' where NAME is the directive name.  For example,
'#define' is the directive that defines a macro.

   The '#' which begins a directive cannot come from a macro expansion.
Also, the directive name is not macro expanded.  Thus, if 'foo' is
defined as a macro expanding to 'define', that does not make '#foo' a
valid preprocessing directive.

   The set of valid directive names is fixed.  Programs cannot define
new preprocessing directives.

   Some directives require arguments; these make up the rest of the
directive line and must be separated from the directive name by
whitespace.  For example, '#define' must be followed by a macro name and
the intended expansion of the macro.

   A preprocessing directive cannot cover more than one line.  The line
may, however, be continued with backslash-newline, or by a block comment
which extends past the end of the line.  In either case, when the
directive is processed, the continuations have already been merged with
the first line to make one long line.


File: cpp.info,  Node: Header Files,  Next: Macros,  Prev: Overview,  Up: Top

2 Header Files
**************

A header file is a file containing C declarations and macro definitions
(*note Macros::) to be shared between several source files.  You request
the use of a header file in your program by "including" it, with the C
preprocessing directive '#include'.

   Header files serve two purposes.

   * System header files declare the interfaces to parts of the
     operating system.  You include them in your program to supply the
     definitions and declarations you need to invoke system calls and
     libraries.

   * Your own header files contain declarations for interfaces between
     the source files of your program.  Each time you have a group of
     related declarations and macro definitions all or most of which are
     needed in several different source files, it is a good idea to
     create a header file for them.

   Including a header file produces the same results as copying the
header file into each source file that needs it.  Such copying would be
time-consuming and error-prone.  With a header file, the related
declarations appear in only one place.  If they need to be changed, they
can be changed in one place, and programs that include the header file
will automatically use the new version when next recompiled.  The header
file eliminates the labor of finding and changing all the copies as well
as the risk that a failure to find one copy will result in
inconsistencies within a program.

   In C, the usual convention is to give header files names that end
with '.h'.  It is most portable to use only letters, digits, dashes, and
underscores in header file names, and at most one dot.

* Menu:

* Include Syntax::
* Include Operation::
* Search Path::
* Once-Only Headers::
* Alternatives to Wrapper #ifndef::
* Computed Includes::
* Wrapper Headers::
* System Headers::


File: cpp.info,  Node: Include Syntax,  Next: Include Operation,  Up: Header Files

2.1 Include Syntax
==================

Both user and system header files are included using the preprocessing
directive '#include'.  It has two variants:

'#include <FILE>'
     This variant is used for system header files.  It searches for a
     file named FILE in a standard list of system directories.  You can
     prepend directories to this list with the '-I' option (*note
     Invocation::).

'#include "FILE"'
     This variant is used for header files of your own program.  It
     searches for a file named FILE first in the directory containing
     the current file, then in the quote directories and then the same
     directories used for '<FILE>'.  You can prepend directories to the
     list of quote directories with the '-iquote' option.

   The argument of '#include', whether delimited with quote marks or
angle brackets, behaves like a string constant in that comments are not
recognized, and macro names are not expanded.  Thus, '#include <x/*y>'
specifies inclusion of a system header file named 'x/*y'.

   However, if backslashes occur within FILE, they are considered
ordinary text characters, not escape characters.  None of the character
escape sequences appropriate to string constants in C are processed.
Thus, '#include "x\n\\y"' specifies a filename containing three
backslashes.  (Some systems interpret '\' as a pathname separator.  All
of these also interpret '/' the same way.  It is most portable to use
only '/'.)

   It is an error if there is anything (other than comments) on the line
after the file name.


File: cpp.info,  Node: Include Operation,  Next: Search Path,  Prev: Include Syntax,  Up: Header Files

2.2 Include Operation
=====================

The '#include' directive works by directing the C preprocessor to scan
the specified file as input before continuing with the rest of the
current file.  The output from the preprocessor contains the output
already generated, followed by the output resulting from the included
file, followed by the output that comes from the text after the
'#include' directive.  For example, if you have a header file 'header.h'
as follows,

     char *test (void);

and a main program called 'program.c' that uses the header file, like
this,

     int x;
     #include "header.h"

     int
     main (void)
     {
       puts (test ());
     }

the compiler will see the same token stream as it would if 'program.c'
read

     int x;
     char *test (void);

     int
     main (void)
     {
       puts (test ());
     }

   Included files are not limited to declarations and macro definitions;
those are merely the typical uses.  Any fragment of a C program can be
included from another file.  The include file could even contain the
beginning of a statement that is concluded in the containing file, or
the end of a statement that was started in the including file.  However,
an included file must consist of complete tokens.  Comments and string
literals which have not been closed by the end of an included file are
invalid.  For error recovery, they are considered to end at the end of
the file.

   To avoid confusion, it is best if header files contain only complete
syntactic units--function declarations or definitions, type
declarations, etc.

   The line following the '#include' directive is always treated as a
separate line by the C preprocessor, even if the included file lacks a
final newline.


File: cpp.info,  Node: Search Path,  Next: Once-Only Headers,  Prev: Include Operation,  Up: Header Files

2.3 Search Path
===============

By default, the preprocessor looks for header files included by the
quote form of the directive '#include "FILE"' first relative to the
directory of the current file, and then in a preconfigured list of
standard system directories.  For example, if '/usr/include/sys/stat.h'
contains '#include "types.h"', GCC looks for 'types.h' first in
'/usr/include/sys', then in its usual search path.

   For the angle-bracket form '#include <FILE>', the preprocessor's
default behavior is to look only in the standard system directories.
The exact search directory list depends on the target system, how GCC is
configured, and where it is installed.  You can find the default search
directory list for your version of CPP by invoking it with the '-v'
option.  For example,

     cpp -v /dev/null -o /dev/null

   There are a number of command-line options you can use to add
additional directories to the search path.  The most commonly-used
option is '-IDIR', which causes DIR to be searched after the current
directory (for the quote form of the directive) and ahead of the
standard system directories.  You can specify multiple '-I' options on
the command line, in which case the directories are searched in
left-to-right order.

   If you need separate control over the search paths for the quote and
angle-bracket forms of the '#include' directive, you can use the
'-iquote' and/or '-isystem' options instead of '-I'.  *Note
Invocation::, for a detailed description of these options, as well as
others that are less generally useful.

   If you specify other options on the command line, such as '-I', that
affect where the preprocessor searches for header files, the directory
list printed by the '-v' option reflects the actual search path used by
the preprocessor.

   Note that you can also prevent the preprocessor from searching any of
the default system header directories with the '-nostdinc' option.  This
is useful when you are compiling an operating system kernel or some
other program that does not use the standard C library facilities, or
the standard C library itself.


File: cpp.info,  Node: Once-Only Headers,  Next: Alternatives to Wrapper #ifndef,  Prev: Search Path,  Up: Header Files

2.4 Once-Only Headers
=====================

If a header file happens to be included twice, the compiler will process
its contents twice.  This is very likely to cause an error, e.g. when
the compiler sees the same structure definition twice.  Even if it does
not, it will certainly waste time.

   The standard way to prevent this is to enclose the entire real
contents of the file in a conditional, like this:

     /* File foo.  */
     #ifndef FILE_FOO_SEEN
     #define FILE_FOO_SEEN

     THE ENTIRE FILE

     #endif /* !FILE_FOO_SEEN */

   This construct is commonly known as a "wrapper #ifndef".  When the
header is included again, the conditional will be false, because
'FILE_FOO_SEEN' is defined.  The preprocessor will skip over the entire
contents of the file, and the compiler will not see it twice.

   CPP optimizes even further.  It remembers when a header file has a
wrapper '#ifndef'.  If a subsequent '#include' specifies that header,
and the macro in the '#ifndef' is still defined, it does not bother to
rescan the file at all.

   You can put comments outside the wrapper.  They will not interfere
with this optimization.

   The macro 'FILE_FOO_SEEN' is called the "controlling macro" or "guard
macro".  In a user header file, the macro name should not begin with
'_'.  In a system header file, it should begin with '__' to avoid
conflicts with user programs.  In any kind of header file, the macro
name should contain the name of the file and some additional text, to
avoid conflicts with other header files.


File: cpp.info,  Node: Alternatives to Wrapper #ifndef,  Next: Computed Includes,  Prev: Once-Only Headers,  Up: Header Files

2.5 Alternatives to Wrapper #ifndef
===================================

CPP supports two more ways of indicating that a header file should be
read only once.  Neither one is as portable as a wrapper '#ifndef' and
we recommend you do not use them in new programs, with the caveat that
'#import' is standard practice in Objective-C.

   CPP supports a variant of '#include' called '#import' which includes
a file, but does so at most once.  If you use '#import' instead of
'#include', then you don't need the conditionals inside the header file
to prevent multiple inclusion of the contents.  '#import' is standard in
Objective-C, but is considered a deprecated extension in C and C++.

   '#import' is not a well designed feature.  It requires the users of a
header file to know that it should only be included once.  It is much
better for the header file's implementor to write the file so that users
don't need to know this.  Using a wrapper '#ifndef' accomplishes this
goal.

   In the present implementation, a single use of '#import' will prevent
the file from ever being read again, by either '#import' or '#include'.
You should not rely on this; do not use both '#import' and '#include' to
refer to the same header file.

   Another way to prevent a header file from being included more than
once is with the '#pragma once' directive (*note Pragmas::).  '#pragma
once' does not have the problems that '#import' does, but it is not
recognized by all preprocessors, so you cannot rely on it in a portable
program.


File: cpp.info,  Node: Computed Includes,  Next: Wrapper Headers,  Prev: Alternatives to Wrapper #ifndef,  Up: Header Files

2.6 Computed Includes
=====================

Sometimes it is necessary to select one of several different header
files to be included into your program.  They might specify
configuration parameters to be used on different sorts of operating
systems, for instance.  You could do this with a series of conditionals,

     #if SYSTEM_1
     # include "system_1.h"
     #elif SYSTEM_2
     # include "system_2.h"
     #elif SYSTEM_3
     ...
     #endif

   That rapidly becomes tedious.  Instead, the preprocessor offers the
ability to use a macro for the header name.  This is called a "computed
include".  Instead of writing a header name as the direct argument of
'#include', you simply put a macro name there instead:

     #define SYSTEM_H "system_1.h"
     ...
     #include SYSTEM_H

'SYSTEM_H' will be expanded, and the preprocessor will look for
'system_1.h' as if the '#include' had been written that way originally.
'SYSTEM_H' could be defined by your Makefile with a '-D' option.

   You must be careful when you define the macro.  '#define' saves
tokens, not text.  The preprocessor has no way of knowing that the macro
will be used as the argument of '#include', so it generates ordinary
tokens, not a header name.  This is unlikely to cause problems if you
use double-quote includes, which are close enough to string constants.
If you use angle brackets, however, you may have trouble.

   The syntax of a computed include is actually a bit more general than
the above.  If the first non-whitespace character after '#include' is
not '"' or '<', then the entire line is macro-expanded like running text
would be.

   If the line expands to a single string constant, the contents of that
string constant are the file to be included.  CPP does not re-examine
the string for embedded quotes, but neither does it process backslash
escapes in the string.  Therefore

     #define HEADER "a\"b"
     #include HEADER

looks for a file named 'a\"b'.  CPP searches for the file according to
the rules for double-quoted includes.

   If the line expands to a token stream beginning with a '<' token and
including a '>' token, then the tokens between the '<' and the first '>'
are combined to form the filename to be included.  Any whitespace
between tokens is reduced to a single space; then any space after the
initial '<' is retained, but a trailing space before the closing '>' is
ignored.  CPP searches for the file according to the rules for
angle-bracket includes.

   In either case, if there are any tokens on the line after the file
name, an error occurs and the directive is not processed.  It is also an
error if the result of expansion does not match either of the two
expected forms.

   These rules are implementation-defined behavior according to the C
standard.  To minimize the risk of different compilers interpreting your
computed includes differently, we recommend you use only a single
object-like macro which expands to a string constant.  This will also
minimize confusion for people reading your program.


File: cpp.info,  Node: Wrapper Headers,  Next: System Headers,  Prev: Computed Includes,  Up: Header Files

2.7 Wrapper Headers
===================

Sometimes it is necessary to adjust the contents of a system-provided
header file without editing it directly.  GCC's 'fixincludes' operation
does this, for example.  One way to do that would be to create a new
header file with the same name and insert it in the search path before
the original header.  That works fine as long as you're willing to
replace the old header entirely.  But what if you want to refer to the
old header from the new one?

   You cannot simply include the old header with '#include'.  That will
start from the beginning, and find your new header again.  If your
header is not protected from multiple inclusion (*note Once-Only
Headers::), it will recurse infinitely and cause a fatal error.

   You could include the old header with an absolute pathname:
     #include "/usr/include/old-header.h"
This works, but is not clean; should the system headers ever move, you
would have to edit the new headers to match.

   There is no way to solve this problem within the C standard, but you
can use the GNU extension '#include_next'.  It means, "Include the
_next_ file with this name".  This directive works like '#include'
except in searching for the specified file: it starts searching the list
of header file directories _after_ the directory in which the current
file was found.

   Suppose you specify '-I /usr/local/include', and the list of
directories to search also includes '/usr/include'; and suppose both
directories contain 'signal.h'.  Ordinary '#include <signal.h>' finds
the file under '/usr/local/include'.  If that file contains
'#include_next <signal.h>', it starts searching after that directory,
and finds the file in '/usr/include'.

   '#include_next' does not distinguish between '<FILE>' and '"FILE"'
inclusion, nor does it check that the file you specify has the same name
as the current file.  It simply looks for the file named, starting with
the directory in the search path after the one where the current file
was found.

   The use of '#include_next' can lead to great confusion.  We recommend
it be used only when there is no other alternative.  In particular, it
should not be used in the headers belonging to a specific program; it
should be used only to make global corrections along the lines of
'fixincludes'.


File: cpp.info,  Node: System Headers,  Prev: Wrapper Headers,  Up: Header Files

2.8 System Headers
==================

The header files declaring interfaces to the operating system and
runtime libraries often cannot be written in strictly conforming C.
Therefore, GCC gives code found in "system headers" special treatment.
All warnings, other than those generated by '#warning' (*note
Diagnostics::), are suppressed while GCC is processing a system header.
Macros defined in a system header are immune to a few warnings wherever
they are expanded.  This immunity is granted on an ad-hoc basis, when we
find that a warning generates lots of false positives because of code in
macros defined in system headers.

   Normally, only the headers found in specific directories are
considered system headers.  These directories are determined when GCC is
compiled.  There are, however, two ways to make normal headers into
system headers:

   * Header files found in directories added to the search path with the
     '-isystem' and '-idirafter' command-line options are treated as
     system headers for the purposes of diagnostics.

   * There is also a directive, '#pragma GCC system_header', which tells
     GCC to consider the rest of the current include file a system
     header, no matter where it was found.  Code that comes before the
     '#pragma' in the file is not affected.  '#pragma GCC system_header'
     has no effect in the primary source file.

   On some targets, such as RS/6000 AIX, GCC implicitly surrounds all
system headers with an 'extern "C"' block when compiling as C++.


File: cpp.info,  Node: Macros,  Next: Conditionals,  Prev: Header Files,  Up: Top

3 Macros
********

A "macro" is a fragment of code which has been given a name.  Whenever
the name is used, it is replaced by the contents of the macro.  There
are two kinds of macros.  They differ mostly in what they look like when
they are used.  "Object-like" macros resemble data objects when used,
"function-like" macros resemble function calls.

   You may define any valid identifier as a macro, even if it is a C
keyword.  The preprocessor does not know anything about keywords.  This
can be useful if you wish to hide a keyword such as 'const' from an
older compiler that does not understand it.  However, the preprocessor
operator 'defined' (*note Defined::) can never be defined as a macro,
and C++'s named operators (*note C++ Named Operators::) cannot be macros
when you are compiling C++.

* Menu:

* Object-like Macros::
* Function-like Macros::
* Macro Arguments::
* Stringizing::
* Concatenation::
* Variadic Macros::
* Predefined Macros::
* Undefining and Redefining Macros::
* Directives Within Macro Arguments::
* Macro Pitfalls::


File: cpp.info,  Node: Object-like Macros,  Next: Function-like Macros,  Up: Macros

3.1 Object-like Macros
======================

An "object-like macro" is a simple identifier which will be replaced by
a code fragment.  It is called object-like because it looks like a data
object in code that uses it.  They are most commonly used to give
symbolic names to numeric constants.

   You create macros with the '#define' directive.  '#define' is
followed by the name of the macro and then the token sequence it should
be an abbreviation for, which is variously referred to as the macro's
"body", "expansion" or "replacement list".  For example,

     #define BUFFER_SIZE 1024

defines a macro named 'BUFFER_SIZE' as an abbreviation for the token
'1024'.  If somewhere after this '#define' directive there comes a C
statement of the form

     foo = (char *) malloc (BUFFER_SIZE);

then the C preprocessor will recognize and "expand" the macro
'BUFFER_SIZE'.  The C compiler will see the same tokens as it would if
you had written

     foo = (char *) malloc (1024);

   By convention, macro names are written in uppercase.  Programs are
easier to read when it is possible to tell at a glance which names are
macros.

   The macro's body ends at the end of the '#define' line.  You may
continue the definition onto multiple lines, if necessary, using
backslash-newline.  When the macro is expanded, however, it will all
come out on one line.  For example,

     #define NUMBERS 1, \
                     2, \
                     3
     int x[] = { NUMBERS };
          ==> int x[] = { 1, 2, 3 };

The most common visible consequence of this is surprising line numbers
in error messages.

   There is no restriction on what can go in a macro body provided it
decomposes into valid preprocessing tokens.  Parentheses need not
balance, and the body need not resemble valid C code.  (If it does not,
you may get error messages from the C compiler when you use the macro.)

   The C preprocessor scans your program sequentially.  Macro
definitions take effect at the place you write them.  Therefore, the
following input to the C preprocessor

     foo = X;
     #define X 4
     bar = X;

produces

     foo = X;
     bar = 4;

   When the preprocessor expands a macro name, the macro's expansion
replaces the macro invocation, then the expansion is examined for more
macros to expand.  For example,

     #define TABLESIZE BUFSIZE
     #define BUFSIZE 1024
     TABLESIZE
          ==> BUFSIZE
          ==> 1024

'TABLESIZE' is expanded first to produce 'BUFSIZE', then that macro is
expanded to produce the final result, '1024'.

   Notice that 'BUFSIZE' was not defined when 'TABLESIZE' was defined.
The '#define' for 'TABLESIZE' uses exactly the expansion you specify--in
this case, 'BUFSIZE'--and does not check to see whether it too contains
macro names.  Only when you _use_ 'TABLESIZE' is the result of its
expansion scanned for more macro names.

   This makes a difference if you change the definition of 'BUFSIZE' at
some point in the source file.  'TABLESIZE', defined as shown, will
always expand using the definition of 'BUFSIZE' that is currently in
effect:

     #define BUFSIZE 1020
     #define TABLESIZE BUFSIZE
     #undef BUFSIZE
     #define BUFSIZE 37

Now 'TABLESIZE' expands (in two stages) to '37'.

   If the expansion of a macro contains its own name, either directly or
via intermediate macros, it is not expanded again when the expansion is
examined for more macros.  This prevents infinite recursion.  *Note
Self-Referential Macros::, for the precise details.


File: cpp.info,  Node: Function-like Macros,  Next: Macro Arguments,  Prev: Object-like Macros,  Up: Macros

3.2 Function-like Macros
========================

You can also define macros whose use looks like a function call.  These
are called "function-like macros".  To define a function-like macro, you
use the same '#define' directive, but you put a pair of parentheses
immediately after the macro name.  For example,

     #define lang_init()  c_init()
     lang_init()
          ==> c_init()

   A function-like macro is only expanded if its name appears with a
pair of parentheses after it.  If you write just the name, it is left
alone.  This can be useful when you have a function and a macro of the
same name, and you wish to use the function sometimes.

     extern void foo(void);
     #define foo() /* optimized inline version */
     ...
       foo();
       funcptr = foo;

   Here the call to 'foo()' will use the macro, but the function pointer
will get the address of the real function.  If the macro were to be
expanded, it would cause a syntax error.

   If you put spaces between the macro name and the parentheses in the
macro definition, that does not define a function-like macro, it defines
an object-like macro whose expansion happens to begin with a pair of
parentheses.

     #define lang_init ()    c_init()
     lang_init()
          ==> () c_init()()

   The first two pairs of parentheses in this expansion come from the
macro.  The third is the pair that was originally after the macro
invocation.  Since 'lang_init' is an object-like macro, it does not
consume those parentheses.


File: cpp.info,  Node: Macro Arguments,  Next: Stringizing,  Prev: Function-like Macros,  Up: Macros

3.3 Macro Arguments
===================

Function-like macros can take "arguments", just like true functions.  To
define a macro that uses arguments, you insert "parameters" between the
pair of parentheses in the macro definition that make the macro
function-like.  The parameters must be valid C identifiers, separated by
commas and optionally whitespace.

   To invoke a macro that takes arguments, you write the name of the
macro followed by a list of "actual arguments" in parentheses, separated
by commas.  The invocation of the macro need not be restricted to a
single logical line--it can cross as many lines in the source file as
you wish.  The number of arguments you give must match the number of
parameters in the macro definition.  When the macro is expanded, each
use of a parameter in its body is replaced by the tokens of the
corresponding argument.  (You need not use all of the parameters in the
macro body.)

   As an example, here is a macro that computes the minimum of two
numeric values, as it is defined in many C programs, and some uses.

     #define min(X, Y)  ((X) < (Y) ? (X) : (Y))
       x = min(a, b);          ==>  x = ((a) < (b) ? (a) : (b));
       y = min(1, 2);          ==>  y = ((1) < (2) ? (1) : (2));
       z = min(a + 28, *p);    ==>  z = ((a + 28) < (*p) ? (a + 28) : (*p));

(In this small example you can already see several of the dangers of
macro arguments.  *Note Macro Pitfalls::, for detailed explanations.)

   Leading and trailing whitespace in each argument is dropped, and all
whitespace between the tokens of an argument is reduced to a single
space.  Parentheses within each argument must balance; a comma within
such parentheses does not end the argument.  However, there is no
requirement for square brackets or braces to balance, and they do not
prevent a comma from separating arguments.  Thus,

     macro (array[x = y, x + 1])

passes two arguments to 'macro': 'array[x = y' and 'x + 1]'.  If you
want to supply 'array[x = y, x + 1]' as an argument, you can write it as
'array[(x = y, x + 1)]', which is equivalent C code.

   All arguments to a macro are completely macro-expanded before they
are substituted into the macro body.  After substitution, the complete
text is scanned again for macros to expand, including the arguments.
This rule may seem strange, but it is carefully designed so you need not
worry about whether any function call is actually a macro invocation.
You can run into trouble if you try to be too clever, though.  *Note
Argument Prescan::, for detailed discussion.

   For example, 'min (min (a, b), c)' is first expanded to

       min (((a) < (b) ? (a) : (b)), (c))

and then to

     ((((a) < (b) ? (a) : (b))) < (c)
      ? (((a) < (b) ? (a) : (b)))
      : (c))

(Line breaks shown here for clarity would not actually be generated.)

   You can leave macro arguments empty; this is not an error to the
preprocessor (but many macros will then expand to invalid code).  You
cannot leave out arguments entirely; if a macro takes two arguments,
there must be exactly one comma at the top level of its argument list.
Here are some silly examples using 'min':

     min(, b)        ==> ((   ) < (b) ? (   ) : (b))
     min(a, )        ==> ((a  ) < ( ) ? (a  ) : ( ))
     min(,)          ==> ((   ) < ( ) ? (   ) : ( ))
     min((,),)       ==> (((,)) < ( ) ? ((,)) : ( ))

     min()      error-> macro "min" requires 2 arguments, but only 1 given
     min(,,)    error-> macro "min" passed 3 arguments, but takes just 2

   Whitespace is not a preprocessing token, so if a macro 'foo' takes
one argument, 'foo ()' and 'foo ( )' both supply it an empty argument.
Previous GNU preprocessor implementations and documentation were
incorrect on this point, insisting that a function-like macro that takes
a single argument be passed a space if an empty argument was required.

   Macro parameters appearing inside string literals are not replaced by
their corresponding actual arguments.

     #define foo(x) x, "x"
     foo(bar)        ==> bar, "x"


File: cpp.info,  Node: Stringizing,  Next: Concatenation,  Prev: Macro Arguments,  Up: Macros

3.4 Stringizing
===============

Sometimes you may want to convert a macro argument into a string
constant.  Parameters are not replaced inside string constants, but you
can use the '#' preprocessing operator instead.  When a macro parameter
is used with a leading '#', the preprocessor replaces it with the
literal text of the actual argument, converted to a string constant.
Unlike normal parameter replacement, the argument is not macro-expanded
first.  This is called "stringizing".

   There is no way to combine an argument with surrounding text and
stringize it all together.  Instead, you can write a series of adjacent
string constants and stringized arguments.  The preprocessor replaces
the stringized arguments with string constants.  The C compiler then
combines all the adjacent string constants into one long string.

   Here is an example of a macro definition that uses stringizing:

     #define WARN_IF(EXP) \
     do { if (EXP) \
             fprintf (stderr, "Warning: " #EXP "\n"); } \
     while (0)
     WARN_IF (x == 0);
          ==> do { if (x == 0)
                fprintf (stderr, "Warning: " "x == 0" "\n"); } while (0);

The argument for 'EXP' is substituted once, as-is, into the 'if'
statement, and once, stringized, into the argument to 'fprintf'.  If 'x'
were a macro, it would be expanded in the 'if' statement, but not in the
string.

   The 'do' and 'while (0)' are a kludge to make it possible to write
'WARN_IF (ARG);', which the resemblance of 'WARN_IF' to a function would
make C programmers want to do; see *note Swallowing the Semicolon::.

   Stringizing in C involves more than putting double-quote characters
around the fragment.  The preprocessor backslash-escapes the quotes
surrounding embedded string constants, and all backslashes within string
and character constants, in order to get a valid C string constant with
the proper contents.  Thus, stringizing 'p = "foo\n";' results in
"p = \"foo\\n\";".  However, backslashes that are not inside string or
character constants are not duplicated: '\n' by itself stringizes to
"\n".

   All leading and trailing whitespace in text being stringized is
ignored.  Any sequence of whitespace in the middle of the text is
converted to a single space in the stringized result.  Comments are
replaced by whitespace long before stringizing happens, so they never
appear in stringized text.

   There is no way to convert a macro argument into a character
constant.

   If you want to stringize the result of expansion of a macro argument,
you have to use two levels of macros.

     #define xstr(s) str(s)
     #define str(s) #s
     #define foo 4
     str (foo)
          ==> "foo"
     xstr (foo)
          ==> xstr (4)
          ==> str (4)
          ==> "4"

   's' is stringized when it is used in 'str', so it is not
macro-expanded first.  But 's' is an ordinary argument to 'xstr', so it
is completely macro-expanded before 'xstr' itself is expanded (*note
Argument Prescan::).  Therefore, by the time 'str' gets to its argument,
it has already been macro-expanded.


File: cpp.info,  Node: Concatenation,  Next: Variadic Macros,  Prev: Stringizing,  Up: Macros

3.5 Concatenation
=================

It is often useful to merge two tokens into one while expanding macros.
This is called "token pasting" or "token concatenation".  The '##'
preprocessing operator performs token pasting.  When a macro is
expanded, the two tokens on either side of each '##' operator are
combined into a single token, which then replaces the '##' and the two
original tokens in the macro expansion.  Usually both will be
identifiers, or one will be an identifier and the other a preprocessing
number.  When pasted, they make a longer identifier.  This isn't the
only valid case.  It is also possible to concatenate two numbers (or a
number and a name, such as '1.5' and 'e3') into a number.  Also,
multi-character operators such as '+=' can be formed by token pasting.

   However, two tokens that don't together form a valid token cannot be
pasted together.  For example, you cannot concatenate 'x' with '+' in
either order.  If you try, the preprocessor issues a warning and emits
the two tokens.  Whether it puts white space between the tokens is
undefined.  It is common to find unnecessary uses of '##' in complex
macros.  If you get this warning, it is likely that you can simply
remove the '##'.

   Both the tokens combined by '##' could come from the macro body, but
you could just as well write them as one token in the first place.
Token pasting is most useful when one or both of the tokens comes from a
macro argument.  If either of the tokens next to an '##' is a parameter
name, it is replaced by its actual argument before '##' executes.  As
with stringizing, the actual argument is not macro-expanded first.  If
the argument is empty, that '##' has no effect.

   Keep in mind that the C preprocessor converts comments to whitespace
before macros are even considered.  Therefore, you cannot create a
comment by concatenating '/' and '*'.  You can put as much whitespace
between '##' and its operands as you like, including comments, and you
can put comments in arguments that will be concatenated.  However, it is
an error if '##' appears at either end of a macro body.

   Consider a C program that interprets named commands.  There probably
needs to be a table of commands, perhaps an array of structures declared
as follows:

     struct command
     {
       char *name;
       void (*function) (void);
     };

     struct command commands[] =
     {
       { "quit", quit_command },
       { "help", help_command },
       ...
     };

   It would be cleaner not to have to give each command name twice, once
in the string constant and once in the function name.  A macro which
takes the name of a command as an argument can make this unnecessary.
The string constant can be created with stringizing, and the function
name by concatenating the argument with '_command'.  Here is how it is
done:

     #define COMMAND(NAME)  { #NAME, NAME ## _command }

     struct command commands[] =
     {
       COMMAND (quit),
       COMMAND (help),
       ...
     };


File: cpp.info,  Node: Variadic Macros,  Next: Predefined Macros,  Prev: Concatenation,  Up: Macros

3.6 Variadic Macros
===================

A macro can be declared to accept a variable number of arguments much as
a function can.  The syntax for defining the macro is similar to that of
a function.  Here is an example:

     #define eprintf(...) fprintf (stderr, __VA_ARGS__)

   This kind of macro is called "variadic".  When the macro is invoked,
all the tokens in its argument list after the last named argument (this
macro has none), including any commas, become the "variable argument".
This sequence of tokens replaces the identifier '__VA_ARGS__' in the
macro body wherever it appears.  Thus, we have this expansion:

     eprintf ("%s:%d: ", input_file, lineno)
          ==>  fprintf (stderr, "%s:%d: ", input_file, lineno)

   The variable argument is completely macro-expanded before it is
inserted into the macro expansion, just like an ordinary argument.  You
may use the '#' and '##' operators to stringize the variable argument or
to paste its leading or trailing token with another token.  (But see
below for an important special case for '##'.)

   If your macro is complicated, you may want a more descriptive name
for the variable argument than '__VA_ARGS__'.  CPP permits this, as an
extension.  You may write an argument name immediately before the '...';
that name is used for the variable argument.  The 'eprintf' macro above
could be written

     #define eprintf(args...) fprintf (stderr, args)

using this extension.  You cannot use '__VA_ARGS__' and this extension
in the same macro.

   You can have named arguments as well as variable arguments in a
variadic macro.  We could define 'eprintf' like this, instead:

     #define eprintf(format, ...) fprintf (stderr, format, __VA_ARGS__)

This formulation looks more descriptive, but historically it was less
flexible: you had to supply at least one argument after the format
string.  In standard C, you could not omit the comma separating the
named argument from the variable arguments.  (Note that this restriction
has been lifted in C++2a, and never existed in GNU C; see below.)

   Furthermore, if you left the variable argument empty, you would have
gotten a syntax error, because there would have been an extra comma
after the format string.

     eprintf("success!\n", );
          ==> fprintf(stderr, "success!\n", );

   This has been fixed in C++2a, and GNU CPP also has a pair of
extensions which deal with this problem.

   First, in GNU CPP, and in C++ beginning in C++2a, you are allowed to
leave the variable argument out entirely:

     eprintf ("success!\n")
          ==> fprintf(stderr, "success!\n", );

Second, C++2a introduces the '__VA_OPT__' function macro.  This macro
may only appear in the definition of a variadic macro.  If the variable
argument has any tokens, then a '__VA_OPT__' invocation expands to its
argument; but if the variable argument does not have any tokens, the
'__VA_OPT__' expands to nothing:

     #define eprintf(format, ...) \
       fprintf (stderr, format __VA_OPT__(,) __VA_ARGS__)

   '__VA_OPT__' is also available in GNU C and GNU C++.

   Historically, GNU CPP has also had another extension to handle the
trailing comma: the '##' token paste operator has a special meaning when
placed between a comma and a variable argument.  Despite the
introduction of '__VA_OPT__', this extension remains supported in GNU
CPP, for backward compatibility.  If you write

     #define eprintf(format, ...) fprintf (stderr, format, ##__VA_ARGS__)

and the variable argument is left out when the 'eprintf' macro is used,
then the comma before the '##' will be deleted.  This does _not_ happen
if you pass an empty argument, nor does it happen if the token preceding
'##' is anything other than a comma.

     eprintf ("success!\n")
          ==> fprintf(stderr, "success!\n");

The above explanation is ambiguous about the case where the only macro
parameter is a variable arguments parameter, as it is meaningless to try
to distinguish whether no argument at all is an empty argument or a
missing argument.  CPP retains the comma when conforming to a specific C
standard.  Otherwise the comma is dropped as an extension to the
standard.

   The C standard mandates that the only place the identifier
'__VA_ARGS__' can appear is in the replacement list of a variadic macro.
It may not be used as a macro name, macro argument name, or within a
different type of macro.  It may also be forbidden in open text; the
standard is ambiguous.  We recommend you avoid using it except for its
defined purpose.

   Likewise, C++ forbids '__VA_OPT__' anywhere outside the replacement
list of a variadic macro.

   Variadic macros became a standard part of the C language with C99.
GNU CPP previously supported them with a named variable argument
('args...', not '...' and '__VA_ARGS__'), which is still supported for
backward compatibility.


File: cpp.info,  Node: Predefined Macros,  Next: Undefining and Redefining Macros,  Prev: Variadic Macros,  Up: Macros

3.7 Predefined Macros
=====================

Several object-like macros are predefined; you use them without
supplying their definitions.  They fall into three classes: standard,
common, and system-specific.

   In C++, there is a fourth category, the named operators.  They act
like predefined macros, but you cannot undefine them.

* Menu:

* Standard Predefined Macros::
* Common Predefined Macros::
* System-specific Predefined Macros::
* C++ Named Operators::


File: cpp.info,  Node: Standard Predefined Macros,  Next: Common Predefined Macros,  Up: Predefined Macros

3.7.1 Standard Predefined Macros
--------------------------------

The standard predefined macros are specified by the relevant language
standards, so they are available with all compilers that implement those
standards.  Older compilers may not provide all of them.  Their names
all start with double underscores.

'__FILE__'
     This macro expands to the name of the current input file, in the
     form of a C string constant.  This is the path by which the
     preprocessor opened the file, not the short name specified in
     '#include' or as the input file name argument.  For example,
     '"/usr/local/include/myheader.h"' is a possible expansion of this
     macro.

'__LINE__'
     This macro expands to the current input line number, in the form of
     a decimal integer constant.  While we call it a predefined macro,
     it's a pretty strange macro, since its "definition" changes with
     each new line of source code.

   '__FILE__' and '__LINE__' are useful in generating an error message
to report an inconsistency detected by the program; the message can
state the source line at which the inconsistency was detected.  For
example,

     fprintf (stderr, "Internal error: "
                      "negative string length "
                      "%d at %s, line %d.",
              length, __FILE__, __LINE__);

   An '#include' directive changes the expansions of '__FILE__' and
'__LINE__' to correspond to the included file.  At the end of that file,
when processing resumes on the input file that contained the '#include'
directive, the expansions of '__FILE__' and '__LINE__' revert to the
values they had before the '#include' (but '__LINE__' is then
incremented by one as processing moves to the line after the
'#include').

   A '#line' directive changes '__LINE__', and may change '__FILE__' as
well.  *Note Line Control::.

   C99 introduced '__func__', and GCC has provided '__FUNCTION__' for a
long time.  Both of these are strings containing the name of the current
function (there are slight semantic differences; see the GCC manual).
Neither of them is a macro; the preprocessor does not know the name of
the current function.  They tend to be useful in conjunction with
'__FILE__' and '__LINE__', though.

'__DATE__'
     This macro expands to a string constant that describes the date on
     which the preprocessor is being run.  The string constant contains
     eleven characters and looks like '"Feb 12 1996"'.  If the day of
     the month is less than 10, it is padded with a space on the left.

     If GCC cannot determine the current date, it will emit a warning
     message (once per compilation) and '__DATE__' will expand to
     '"??? ?? ????"'.

'__TIME__'
     This macro expands to a string constant that describes the time at
     which the preprocessor is being run.  The string constant contains
     eight characters and looks like '"23:59:01"'.

     If GCC cannot determine the current time, it will emit a warning
     message (once per compilation) and '__TIME__' will expand to
     '"??:??:??"'.

'__STDC__'
     In normal operation, this macro expands to the constant 1, to
     signify that this compiler conforms to ISO Standard C.  If GNU CPP
     is used with a compiler other than GCC, this is not necessarily
     true; however, the preprocessor always conforms to the standard
     unless the '-traditional-cpp' option is used.

     This macro is not defined if the '-traditional-cpp' option is used.

     On some hosts, the system compiler uses a different convention,
     where '__STDC__' is normally 0, but is 1 if the user specifies
     strict conformance to the C Standard.  CPP follows the host
     convention when processing system header files, but when processing
     user files '__STDC__' is always 1.  This has been reported to cause
     problems; for instance, some versions of Solaris provide X Windows
     headers that expect '__STDC__' to be either undefined or 1.  *Note
     Invocation::.

'__STDC_VERSION__'
     This macro expands to the C Standard's version number, a long
     integer constant of the form 'YYYYMML' where YYYY and MM are the
     year and month of the Standard version.  This signifies which
     version of the C Standard the compiler conforms to.  Like
     '__STDC__', this is not necessarily accurate for the entire
     implementation, unless GNU CPP is being used with GCC.

     The value '199409L' signifies the 1989 C standard as amended in
     1994, which is the current default; the value '199901L' signifies
     the 1999 revision of the C standard; the value '201112L' signifies
     the 2011 revision of the C standard; the value '201710L' signifies
     the 2017 revision of the C standard (which is otherwise identical
     to the 2011 version apart from correction of defects).  An
     unspecified value larger than '201710L' is used for the
     experimental '-std=c2x' and '-std=gnu2x' modes.

     This macro is not defined if the '-traditional-cpp' option is used,
     nor when compiling C++ or Objective-C.

'__STDC_HOSTED__'
     This macro is defined, with value 1, if the compiler's target is a
     "hosted environment".  A hosted environment has the complete
     facilities of the standard C library available.

'__cplusplus'
     This macro is defined when the C++ compiler is in use.  You can use
     '__cplusplus' to test whether a header is compiled by a C compiler
     or a C++ compiler.  This macro is similar to '__STDC_VERSION__', in
     that it expands to a version number.  Depending on the language
     standard selected, the value of the macro is '199711L' for the 1998
     C++ standard, '201103L' for the 2011 C++ standard, '201402L' for
     the 2014 C++ standard, '201703L' for the 2017 C++ standard, or an
     unspecified value strictly larger than '201703L' for the
     experimental languages enabled by '-std=c++2a' and '-std=gnu++2a'.

'__OBJC__'
     This macro is defined, with value 1, when the Objective-C compiler
     is in use.  You can use '__OBJC__' to test whether a header is
     compiled by a C compiler or an Objective-C compiler.

'__ASSEMBLER__'
     This macro is defined with value 1 when preprocessing assembly
     language.


File: cpp.info,  Node: Common Predefined Macros,  Next: System-specific Predefined Macros,  Prev: Standard Predefined Macros,  Up: Predefined Macros

3.7.2 Common Predefined Macros
------------------------------

The common predefined macros are GNU C extensions.  They are available
with the same meanings regardless of the machine or operating system on
which you are using GNU C or GNU Fortran.  Their names all start with
double underscores.

'__COUNTER__'
     This macro expands to sequential integral values starting from 0.
     In conjunction with the '##' operator, this provides a convenient
     means to generate unique identifiers.  Care must be taken to ensure
     that '__COUNTER__' is not expanded prior to inclusion of
     precompiled headers which use it.  Otherwise, the precompiled
     headers will not be used.

'__GFORTRAN__'
     The GNU Fortran compiler defines this.

'__GNUC__'
'__GNUC_MINOR__'
'__GNUC_PATCHLEVEL__'
     These macros are defined by all GNU compilers that use the C
     preprocessor: C, C++, Objective-C and Fortran.  Their values are
     the major version, minor version, and patch level of the compiler,
     as integer constants.  For example, GCC version X.Y.Z defines
     '__GNUC__' to X, '__GNUC_MINOR__' to Y, and '__GNUC_PATCHLEVEL__'
     to Z.  These macros are also defined if you invoke the preprocessor
     directly.

     If all you need to know is whether or not your program is being
     compiled by GCC, or a non-GCC compiler that claims to accept the
     GNU C dialects, you can simply test '__GNUC__'.  If you need to
     write code which depends on a specific version, you must be more
     careful.  Each time the minor version is increased, the patch level
     is reset to zero; each time the major version is increased, the
     minor version and patch level are reset.  If you wish to use the
     predefined macros directly in the conditional, you will need to
     write it like this:

          /* Test for GCC > 3.2.0 */
          #if __GNUC__ > 3 || \
              (__GNUC__ == 3 && (__GNUC_MINOR__ > 2 || \
                                 (__GNUC_MINOR__ == 2 && \
                                  __GNUC_PATCHLEVEL__ > 0))

     Another approach is to use the predefined macros to calculate a
     single number, then compare that against a threshold:

          #define GCC_VERSION (__GNUC__ * 10000 \
                               + __GNUC_MINOR__ * 100 \
                               + __GNUC_PATCHLEVEL__)
          ...
          /* Test for GCC > 3.2.0 */
          #if GCC_VERSION > 30200

     Many people find this form easier to understand.

'__GNUG__'
     The GNU C++ compiler defines this.  Testing it is equivalent to
     testing '(__GNUC__ && __cplusplus)'.

'__STRICT_ANSI__'
     GCC defines this macro if and only if the '-ansi' switch, or a
     '-std' switch specifying strict conformance to some version of ISO
     C or ISO C++, was specified when GCC was invoked.  It is defined to
     '1'.  This macro exists primarily to direct GNU libc's header files
     to use only definitions found in standard C.

'__BASE_FILE__'
     This macro expands to the name of the main input file, in the form
     of a C string constant.  This is the source file that was specified
     on the command line of the preprocessor or C compiler.

'__INCLUDE_LEVEL__'
     This macro expands to a decimal integer constant that represents
     the depth of nesting in include files.  The value of this macro is
     incremented on every '#include' directive and decremented at the
     end of every included file.  It starts out at 0, its value within
     the base file specified on the command line.

'__ELF__'
     This macro is defined if the target uses the ELF object format.

'__VERSION__'
     This macro expands to a string constant which describes the version
     of the compiler in use.  You should not rely on its contents having
     any particular form, but it can be counted on to contain at least
     the release number.

'__OPTIMIZE__'
'__OPTIMIZE_SIZE__'
'__NO_INLINE__'
     These macros describe the compilation mode.  '__OPTIMIZE__' is
     defined in all optimizing compilations.  '__OPTIMIZE_SIZE__' is
     defined if the compiler is optimizing for size, not speed.
     '__NO_INLINE__' is defined if no functions will be inlined into
     their callers (when not optimizing, or when inlining has been
     specifically disabled by '-fno-inline').

     These macros cause certain GNU header files to provide optimized
     definitions, using macros or inline functions, of system library
     functions.  You should not use these macros in any way unless you
     make sure that programs will execute with the same effect whether
     or not they are defined.  If they are defined, their value is 1.

'__GNUC_GNU_INLINE__'
     GCC defines this macro if functions declared 'inline' will be
     handled in GCC's traditional gnu90 mode.  Object files will contain
     externally visible definitions of all functions declared 'inline'
     without 'extern' or 'static'.  They will not contain any
     definitions of any functions declared 'extern inline'.

'__GNUC_STDC_INLINE__'
     GCC defines this macro if functions declared 'inline' will be
     handled according to the ISO C99 or later standards.  Object files
     will contain externally visible definitions of all functions
     declared 'extern inline'.  They will not contain definitions of any
     functions declared 'inline' without 'extern'.

     If this macro is defined, GCC supports the 'gnu_inline' function
     attribute as a way to always get the gnu90 behavior.

'__CHAR_UNSIGNED__'
     GCC defines this macro if and only if the data type 'char' is
     unsigned on the target machine.  It exists to cause the standard
     header file 'limits.h' to work correctly.  You should not use this
     macro yourself; instead, refer to the standard macros defined in
     'limits.h'.

'__WCHAR_UNSIGNED__'
     Like '__CHAR_UNSIGNED__', this macro is defined if and only if the
     data type 'wchar_t' is unsigned and the front-end is in C++ mode.

'__REGISTER_PREFIX__'
     This macro expands to a single token (not a string constant) which
     is the prefix applied to CPU register names in assembly language
     for this target.  You can use it to write assembly that is usable
     in multiple environments.  For example, in the 'm68k-aout'
     environment it expands to nothing, but in the 'm68k-coff'
     environment it expands to a single '%'.

'__USER_LABEL_PREFIX__'
     This macro expands to a single token which is the prefix applied to
     user labels (symbols visible to C code) in assembly.  For example,
     in the 'm68k-aout' environment it expands to an '_', but in the
     'm68k-coff' environment it expands to nothing.

     This macro will have the correct definition even if
     '-f(no-)underscores' is in use, but it will not be correct if
     target-specific options that adjust this prefix are used (e.g. the
     OSF/rose '-mno-underscores' option).

'__SIZE_TYPE__'
'__PTRDIFF_TYPE__'
'__WCHAR_TYPE__'
'__WINT_TYPE__'
'__INTMAX_TYPE__'
'__UINTMAX_TYPE__'
'__SIG_ATOMIC_TYPE__'
'__INT8_TYPE__'
'__INT16_TYPE__'
'__INT32_TYPE__'
'__INT64_TYPE__'
'__UINT8_TYPE__'
'__UINT16_TYPE__'
'__UINT32_TYPE__'
'__UINT64_TYPE__'
'__INT_LEAST8_TYPE__'
'__INT_LEAST16_TYPE__'
'__INT_LEAST32_TYPE__'
'__INT_LEAST64_TYPE__'
'__UINT_LEAST8_TYPE__'
'__UINT_LEAST16_TYPE__'
'__UINT_LEAST32_TYPE__'
'__UINT_LEAST64_TYPE__'
'__INT_FAST8_TYPE__'
'__INT_FAST16_TYPE__'
'__INT_FAST32_TYPE__'
'__INT_FAST64_TYPE__'
'__UINT_FAST8_TYPE__'
'__UINT_FAST16_TYPE__'
'__UINT_FAST32_TYPE__'
'__UINT_FAST64_TYPE__'
'__INTPTR_TYPE__'
'__UINTPTR_TYPE__'
     These macros are defined to the correct underlying types for the
     'size_t', 'ptrdiff_t', 'wchar_t', 'wint_t', 'intmax_t',
     'uintmax_t', 'sig_atomic_t', 'int8_t', 'int16_t', 'int32_t',
     'int64_t', 'uint8_t', 'uint16_t', 'uint32_t', 'uint64_t',
     'int_least8_t', 'int_least16_t', 'int_least32_t', 'int_least64_t',
     'uint_least8_t', 'uint_least16_t', 'uint_least32_t',
     'uint_least64_t', 'int_fast8_t', 'int_fast16_t', 'int_fast32_t',
     'int_fast64_t', 'uint_fast8_t', 'uint_fast16_t', 'uint_fast32_t',
     'uint_fast64_t', 'intptr_t', and 'uintptr_t' typedefs,
     respectively.  They exist to make the standard header files
     'stddef.h', 'stdint.h', and 'wchar.h' work correctly.  You should
     not use these macros directly; instead, include the appropriate
     headers and use the typedefs.  Some of these macros may not be
     defined on particular systems if GCC does not provide a 'stdint.h'
     header on those systems.

'__CHAR_BIT__'
     Defined to the number of bits used in the representation of the
     'char' data type.  It exists to make the standard header given
     numerical limits work correctly.  You should not use this macro
     directly; instead, include the appropriate headers.

'__SCHAR_MAX__'
'__WCHAR_MAX__'
'__SHRT_MAX__'
'__INT_MAX__'
'__LONG_MAX__'
'__LONG_LONG_MAX__'
'__WINT_MAX__'
'__SIZE_MAX__'
'__PTRDIFF_MAX__'
'__INTMAX_MAX__'
'__UINTMAX_MAX__'
'__SIG_ATOMIC_MAX__'
'__INT8_MAX__'
'__INT16_MAX__'
'__INT32_MAX__'
'__INT64_MAX__'
'__UINT8_MAX__'
'__UINT16_MAX__'
'__UINT32_MAX__'
'__UINT64_MAX__'
'__INT_LEAST8_MAX__'
'__INT_LEAST16_MAX__'
'__INT_LEAST32_MAX__'
'__INT_LEAST64_MAX__'
'__UINT_LEAST8_MAX__'
'__UINT_LEAST16_MAX__'
'__UINT_LEAST32_MAX__'
'__UINT_LEAST64_MAX__'
'__INT_FAST8_MAX__'
'__INT_FAST16_MAX__'
'__INT_FAST32_MAX__'
'__INT_FAST64_MAX__'
'__UINT_FAST8_MAX__'
'__UINT_FAST16_MAX__'
'__UINT_FAST32_MAX__'
'__UINT_FAST64_MAX__'
'__INTPTR_MAX__'
'__UINTPTR_MAX__'
'__WCHAR_MIN__'
'__WINT_MIN__'
'__SIG_ATOMIC_MIN__'
     Defined to the maximum value of the 'signed char', 'wchar_t',
     'signed short', 'signed int', 'signed long', 'signed long long',
     'wint_t', 'size_t', 'ptrdiff_t', 'intmax_t', 'uintmax_t',
     'sig_atomic_t', 'int8_t', 'int16_t', 'int32_t', 'int64_t',
     'uint8_t', 'uint16_t', 'uint32_t', 'uint64_t', 'int_least8_t',
     'int_least16_t', 'int_least32_t', 'int_least64_t', 'uint_least8_t',
     'uint_least16_t', 'uint_least32_t', 'uint_least64_t',
     'int_fast8_t', 'int_fast16_t', 'int_fast32_t', 'int_fast64_t',
     'uint_fast8_t', 'uint_fast16_t', 'uint_fast32_t', 'uint_fast64_t',
     'intptr_t', and 'uintptr_t' types and to the minimum value of the
     'wchar_t', 'wint_t', and 'sig_atomic_t' types respectively.  They
     exist to make the standard header given numerical limits work
     correctly.  You should not use these macros directly; instead,
     include the appropriate headers.  Some of these macros may not be
     defined on particular systems if GCC does not provide a 'stdint.h'
     header on those systems.

'__INT8_C'
'__INT16_C'
'__INT32_C'
'__INT64_C'
'__UINT8_C'
'__UINT16_C'
'__UINT32_C'
'__UINT64_C'
'__INTMAX_C'
'__UINTMAX_C'
     Defined to implementations of the standard 'stdint.h' macros with
     the same names without the leading '__'.  They exist the make the
     implementation of that header work correctly.  You should not use
     these macros directly; instead, include the appropriate headers.
     Some of these macros may not be defined on particular systems if
     GCC does not provide a 'stdint.h' header on those systems.

'__SCHAR_WIDTH__'
'__SHRT_WIDTH__'
'__INT_WIDTH__'
'__LONG_WIDTH__'
'__LONG_LONG_WIDTH__'
'__PTRDIFF_WIDTH__'
'__SIG_ATOMIC_WIDTH__'
'__SIZE_WIDTH__'
'__WCHAR_WIDTH__'
'__WINT_WIDTH__'
'__INT_LEAST8_WIDTH__'
'__INT_LEAST16_WIDTH__'
'__INT_LEAST32_WIDTH__'
'__INT_LEAST64_WIDTH__'
'__INT_FAST8_WIDTH__'
'__INT_FAST16_WIDTH__'
'__INT_FAST32_WIDTH__'
'__INT_FAST64_WIDTH__'
'__INTPTR_WIDTH__'
'__INTMAX_WIDTH__'
     Defined to the bit widths of the corresponding types.  They exist
     to make the implementations of 'limits.h' and 'stdint.h' behave
     correctly.  You should not use these macros directly; instead,
     include the appropriate headers.  Some of these macros may not be
     defined on particular systems if GCC does not provide a 'stdint.h'
     header on those systems.

'__SIZEOF_INT__'
'__SIZEOF_LONG__'
'__SIZEOF_LONG_LONG__'
'__SIZEOF_SHORT__'
'__SIZEOF_POINTER__'
'__SIZEOF_FLOAT__'
'__SIZEOF_DOUBLE__'
'__SIZEOF_LONG_DOUBLE__'
'__SIZEOF_SIZE_T__'
'__SIZEOF_WCHAR_T__'
'__SIZEOF_WINT_T__'
'__SIZEOF_PTRDIFF_T__'
     Defined to the number of bytes of the C standard data types: 'int',
     'long', 'long long', 'short', 'void *', 'float', 'double', 'long
     double', 'size_t', 'wchar_t', 'wint_t' and 'ptrdiff_t'.

'__BYTE_ORDER__'
'__ORDER_LITTLE_ENDIAN__'
'__ORDER_BIG_ENDIAN__'
'__ORDER_PDP_ENDIAN__'
     '__BYTE_ORDER__' is defined to one of the values
     '__ORDER_LITTLE_ENDIAN__', '__ORDER_BIG_ENDIAN__', or
     '__ORDER_PDP_ENDIAN__' to reflect the layout of multi-byte and
     multi-word quantities in memory.  If '__BYTE_ORDER__' is equal to
     '__ORDER_LITTLE_ENDIAN__' or '__ORDER_BIG_ENDIAN__', then
     multi-byte and multi-word quantities are laid out identically: the
     byte (word) at the lowest address is the least significant or most
     significant byte (word) of the quantity, respectively.  If
     '__BYTE_ORDER__' is equal to '__ORDER_PDP_ENDIAN__', then bytes in
     16-bit words are laid out in a little-endian fashion, whereas the
     16-bit subwords of a 32-bit quantity are laid out in big-endian
     fashion.

     You should use these macros for testing like this:

          /* Test for a little-endian machine */
          #if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__

'__FLOAT_WORD_ORDER__'
     '__FLOAT_WORD_ORDER__' is defined to one of the values
     '__ORDER_LITTLE_ENDIAN__' or '__ORDER_BIG_ENDIAN__' to reflect the
     layout of the words of multi-word floating-point quantities.

'__DEPRECATED'
     This macro is defined, with value 1, when compiling a C++ source
     file with warnings about deprecated constructs enabled.  These
     warnings are enabled by default, but can be disabled with
     '-Wno-deprecated'.

'__EXCEPTIONS'
     This macro is defined, with value 1, when compiling a C++ source
     file with exceptions enabled.  If '-fno-exceptions' is used when
     compiling the file, then this macro is not defined.

'__GXX_RTTI'
     This macro is defined, with value 1, when compiling a C++ source
     file with runtime type identification enabled.  If '-fno-rtti' is
     used when compiling the file, then this macro is not defined.

'__USING_SJLJ_EXCEPTIONS__'
     This macro is defined, with value 1, if the compiler uses the old
     mechanism based on 'setjmp' and 'longjmp' for exception handling.

'__GXX_EXPERIMENTAL_CXX0X__'
     This macro is defined when compiling a C++ source file with the
     option '-std=c++0x' or '-std=gnu++0x'.  It indicates that some
     features likely to be included in C++0x are available.  Note that
     these features are experimental, and may change or be removed in
     future versions of GCC.

'__GXX_WEAK__'
     This macro is defined when compiling a C++ source file.  It has the
     value 1 if the compiler will use weak symbols, COMDAT sections, or
     other similar techniques to collapse symbols with "vague linkage"
     that are defined in multiple translation units.  If the compiler
     will not collapse such symbols, this macro is defined with value 0.
     In general, user code should not need to make use of this macro;
     the purpose of this macro is to ease implementation of the C++
     runtime library provided with G++.

'__NEXT_RUNTIME__'
     This macro is defined, with value 1, if (and only if) the NeXT
     runtime (as in '-fnext-runtime') is in use for Objective-C.  If the
     GNU runtime is used, this macro is not defined, so that you can use
     this macro to determine which runtime (NeXT or GNU) is being used.

'__LP64__'
'_LP64'
     These macros are defined, with value 1, if (and only if) the
     compilation is for a target where 'long int' and pointer both use
     64-bits and 'int' uses 32-bit.

'__SSP__'
     This macro is defined, with value 1, when '-fstack-protector' is in
     use.

'__SSP_ALL__'
     This macro is defined, with value 2, when '-fstack-protector-all'
     is in use.

'__SSP_STRONG__'
     This macro is defined, with value 3, when
     '-fstack-protector-strong' is in use.

'__SSP_EXPLICIT__'
     This macro is defined, with value 4, when
     '-fstack-protector-explicit' is in use.

'__SANITIZE_ADDRESS__'
     This macro is defined, with value 1, when '-fsanitize=address' or
     '-fsanitize=kernel-address' are in use.

'__SANITIZE_THREAD__'
     This macro is defined, with value 1, when '-fsanitize=thread' is in
     use.

'__TIMESTAMP__'
     This macro expands to a string constant that describes the date and
     time of the last modification of the current source file.  The
     string constant contains abbreviated day of the week, month, day of
     the month, time in hh:mm:ss form, year and looks like
     '"Sun Sep 16 01:03:52 1973"'.  If the day of the month is less than
     10, it is padded with a space on the left.

     If GCC cannot determine the current date, it will emit a warning
     message (once per compilation) and '__TIMESTAMP__' will expand to
     '"??? ??? ?? ??:??:?? ????"'.

'__GCC_HAVE_SYNC_COMPARE_AND_SWAP_1'
'__GCC_HAVE_SYNC_COMPARE_AND_SWAP_2'
'__GCC_HAVE_SYNC_COMPARE_AND_SWAP_4'
'__GCC_HAVE_SYNC_COMPARE_AND_SWAP_8'
'__GCC_HAVE_SYNC_COMPARE_AND_SWAP_16'
     These macros are defined when the target processor supports atomic
     compare and swap operations on operands 1, 2, 4, 8 or 16 bytes in
     length, respectively.

'__HAVE_SPECULATION_SAFE_VALUE'
     This macro is defined with the value 1 to show that this version of
     GCC supports '__builtin_speculation_safe_value'.

'__GCC_HAVE_DWARF2_CFI_ASM'
     This macro is defined when the compiler is emitting DWARF CFI
     directives to the assembler.  When this is defined, it is possible
     to emit those same directives in inline assembly.

'__FP_FAST_FMA'
'__FP_FAST_FMAF'
'__FP_FAST_FMAL'
     These macros are defined with value 1 if the backend supports the
     'fma', 'fmaf', and 'fmal' builtin functions, so that the include
     file 'math.h' can define the macros 'FP_FAST_FMA', 'FP_FAST_FMAF',
     and 'FP_FAST_FMAL' for compatibility with the 1999 C standard.

'__FP_FAST_FMAF16'
'__FP_FAST_FMAF32'
'__FP_FAST_FMAF64'
'__FP_FAST_FMAF128'
'__FP_FAST_FMAF32X'
'__FP_FAST_FMAF64X'
'__FP_FAST_FMAF128X'
     These macros are defined with the value 1 if the backend supports
     the 'fma' functions using the additional '_FloatN' and '_FloatNx'
     types that are defined in ISO/IEC TS 18661-3:2015.  The include
     file 'math.h' can define the 'FP_FAST_FMAFN' and 'FP_FAST_FMAFNx'
     macros if the user defined '__STDC_WANT_IEC_60559_TYPES_EXT__'
     before including 'math.h'.

'__GCC_IEC_559'
     This macro is defined to indicate the intended level of support for
     IEEE 754 (IEC 60559) floating-point arithmetic.  It expands to a
     nonnegative integer value.  If 0, it indicates that the combination
     of the compiler configuration and the command-line options is not
     intended to support IEEE 754 arithmetic for 'float' and 'double' as
     defined in C99 and C11 Annex F (for example, that the standard
     rounding modes and exceptions are not supported, or that
     optimizations are enabled that conflict with IEEE 754 semantics).
     If 1, it indicates that IEEE 754 arithmetic is intended to be
     supported; this does not mean that all relevant language features
     are supported by GCC. If 2 or more, it additionally indicates
     support for IEEE 754-2008 (in particular, that the binary encodings
     for quiet and signaling NaNs are as specified in IEEE 754-2008).

     This macro does not indicate the default state of command-line
     options that control optimizations that C99 and C11 permit to be
     controlled by standard pragmas, where those standards do not
     require a particular default state.  It does not indicate whether
     optimizations respect signaling NaN semantics (the macro for that
     is '__SUPPORT_SNAN__').  It does not indicate support for decimal
     floating point or the IEEE 754 binary16 and binary128 types.

'__GCC_IEC_559_COMPLEX'
     This macro is defined to indicate the intended level of support for
     IEEE 754 (IEC 60559) floating-point arithmetic for complex numbers,
     as defined in C99 and C11 Annex G. It expands to a nonnegative
     integer value.  If 0, it indicates that the combination of the
     compiler configuration and the command-line options is not intended
     to support Annex G requirements (for example, because
     '-fcx-limited-range' was used).  If 1 or more, it indicates that it
     is intended to support those requirements; this does not mean that
     all relevant language features are supported by GCC.

'__NO_MATH_ERRNO__'
     This macro is defined if '-fno-math-errno' is used, or enabled by
     another option such as '-ffast-math' or by default.


File: cpp.info,  Node: System-specific Predefined Macros,  Next: C++ Named Operators,  Prev: Common Predefined Macros,  Up: Predefined Macros

3.7.3 System-specific Predefined Macros
---------------------------------------

The C preprocessor normally predefines several macros that indicate what
type of system and machine is in use.  They are obviously different on
each target supported by GCC.  This manual, being for all systems and
machines, cannot tell you what their names are, but you can use 'cpp
-dM' to see them all.  *Note Invocation::.  All system-specific
predefined macros expand to a constant value, so you can test them with
either '#ifdef' or '#if'.

   The C standard requires that all system-specific macros be part of
the "reserved namespace".  All names which begin with two underscores,
or an underscore and a capital letter, are reserved for the compiler and
library to use as they wish.  However, historically system-specific
macros have had names with no special prefix; for instance, it is common
to find 'unix' defined on Unix systems.  For all such macros, GCC
provides a parallel macro with two underscores added at the beginning
and the end.  If 'unix' is defined, '__unix__' will be defined too.
There will never be more than two underscores; the parallel of '_mips'
is '__mips__'.

   When the '-ansi' option, or any '-std' option that requests strict
conformance, is given to the compiler, all the system-specific
predefined macros outside the reserved namespace are suppressed.  The
parallel macros, inside the reserved namespace, remain defined.

   We are slowly phasing out all predefined macros which are outside the
reserved namespace.  You should never use them in new programs, and we
encourage you to correct older code to use the parallel macros whenever
you find it.  We don't recommend you use the system-specific macros that
are in the reserved namespace, either.  It is better in the long run to
check specifically for features you need, using a tool such as
'autoconf'.


File: cpp.info,  Node: C++ Named Operators,  Prev: System-specific Predefined Macros,  Up: Predefined Macros

3.7.4 C++ Named Operators
-------------------------

In C++, there are eleven keywords which are simply alternate spellings
of operators normally written with punctuation.  These keywords are
treated as such even in the preprocessor.  They function as operators in
'#if', and they cannot be defined as macros or poisoned.  In C, you can
request that those keywords take their C++ meaning by including
'iso646.h'.  That header defines each one as a normal object-like macro
expanding to the appropriate punctuator.

   These are the named operators and their corresponding punctuators:

Named Operator   Punctuator
'and'            '&&'
'and_eq'         '&='
'bitand'         '&'
'bitor'          '|'
'compl'          '~'
'not'            '!'
'not_eq'         '!='
'or'             '||'
'or_eq'          '|='
'xor'            '^'
'xor_eq'         '^='


File: cpp.info,  Node: Undefining and Redefining Macros,  Next: Directives Within Macro Arguments,  Prev: Predefined Macros,  Up: Macros

3.8 Undefining and Redefining Macros
====================================

If a macro ceases to be useful, it may be "undefined" with the '#undef'
directive.  '#undef' takes a single argument, the name of the macro to
undefine.  You use the bare macro name, even if the macro is
function-like.  It is an error if anything appears on the line after the
macro name.  '#undef' has no effect if the name is not a macro.

     #define FOO 4
     x = FOO;        ==> x = 4;
     #undef FOO
     x = FOO;        ==> x = FOO;

   Once a macro has been undefined, that identifier may be "redefined"
as a macro by a subsequent '#define' directive.  The new definition need
not have any resemblance to the old definition.

   However, if an identifier which is currently a macro is redefined,
then the new definition must be "effectively the same" as the old one.
Two macro definitions are effectively the same if:
   * Both are the same type of macro (object- or function-like).
   * All the tokens of the replacement list are the same.
   * If there are any parameters, they are the same.
   * Whitespace appears in the same places in both.  It need not be
     exactly the same amount of whitespace, though.  Remember that
     comments count as whitespace.

These definitions are effectively the same:
     #define FOUR (2 + 2)
     #define FOUR         (2    +    2)
     #define FOUR (2 /* two */ + 2)
but these are not:
     #define FOUR (2 + 2)
     #define FOUR ( 2+2 )
     #define FOUR (2 * 2)
     #define FOUR(score,and,seven,years,ago) (2 + 2)

   If a macro is redefined with a definition that is not effectively the
same as the old one, the preprocessor issues a warning and changes the
macro to use the new definition.  If the new definition is effectively
the same, the redefinition is silently ignored.  This allows, for
instance, two different headers to define a common macro.  The
preprocessor will only complain if the definitions do not match.


File: cpp.info,  Node: Directives Within Macro Arguments,  Next: Macro Pitfalls,  Prev: Undefining and Redefining Macros,  Up: Macros

3.9 Directives Within Macro Arguments
=====================================

Occasionally it is convenient to use preprocessor directives within the
arguments of a macro.  The C and C++ standards declare that behavior in
these cases is undefined.  GNU CPP processes arbitrary directives within
macro arguments in exactly the same way as it would have processed the
directive were the function-like macro invocation not present.

   If, within a macro invocation, that macro is redefined, then the new
definition takes effect in time for argument pre-expansion, but the
original definition is still used for argument replacement.  Here is a
pathological example:

     #define f(x) x x
     f (1
     #undef f
     #define f 2
     f)

which expands to

     1 2 1 2

with the semantics described above.


File: cpp.info,  Node: Macro Pitfalls,  Prev: Directives Within Macro Arguments,  Up: Macros

3.10 Macro Pitfalls
===================

In this section we describe some special rules that apply to macros and
macro expansion, and point out certain cases in which the rules have
counter-intuitive consequences that you must watch out for.

* Menu:

* Misnesting::
* Operator Precedence Problems::
* Swallowing the Semicolon::
* Duplication of Side Effects::
* Self-Referential Macros::
* Argument Prescan::
* Newlines in Arguments::


File: cpp.info,  Node: Misnesting,  Next: Operator Precedence Problems,  Up: Macro Pitfalls

3.10.1 Misnesting
-----------------

When a macro is called with arguments, the arguments are substituted
into the macro body and the result is checked, together with the rest of
the input file, for more macro calls.  It is possible to piece together
a macro call coming partially from the macro body and partially from the
arguments.  For example,

     #define twice(x) (2*(x))
     #define call_with_1(x) x(1)
     call_with_1 (twice)
          ==> twice(1)
          ==> (2*(1))

   Macro definitions do not have to have balanced parentheses.  By
writing an unbalanced open parenthesis in a macro body, it is possible
to create a macro call that begins inside the macro body but ends
outside of it.  For example,

     #define strange(file) fprintf (file, "%s %d",
     ...
     strange(stderr) p, 35)
          ==> fprintf (stderr, "%s %d", p, 35)

   The ability to piece together a macro call can be useful, but the use
of unbalanced open parentheses in a macro body is just confusing, and
should be avoided.


File: cpp.info,  Node: Operator Precedence Problems,  Next: Swallowing the Semicolon,  Prev: Misnesting,  Up: Macro Pitfalls

3.10.2 Operator Precedence Problems
-----------------------------------

You may have noticed that in most of the macro definition examples shown
above, each occurrence of a macro argument name had parentheses around
it.  In addition, another pair of parentheses usually surround the
entire macro definition.  Here is why it is best to write macros that
way.

   Suppose you define a macro as follows,

     #define ceil_div(x, y) (x + y - 1) / y

whose purpose is to divide, rounding up.  (One use for this operation is
to compute how many 'int' objects are needed to hold a certain number of
'char' objects.)  Then suppose it is used as follows:

     a = ceil_div (b & c, sizeof (int));
          ==> a = (b & c + sizeof (int) - 1) / sizeof (int);

This does not do what is intended.  The operator-precedence rules of C
make it equivalent to this:

     a = (b & (c + sizeof (int) - 1)) / sizeof (int);

What we want is this:

     a = ((b & c) + sizeof (int) - 1)) / sizeof (int);

Defining the macro as

     #define ceil_div(x, y) ((x) + (y) - 1) / (y)

provides the desired result.

   Unintended grouping can result in another way.  Consider 'sizeof
ceil_div(1, 2)'.  That has the appearance of a C expression that would
compute the size of the type of 'ceil_div (1, 2)', but in fact it means
something very different.  Here is what it expands to:

     sizeof ((1) + (2) - 1) / (2)

This would take the size of an integer and divide it by two.  The
precedence rules have put the division outside the 'sizeof' when it was
intended to be inside.

   Parentheses around the entire macro definition prevent such problems.
Here, then, is the recommended way to define 'ceil_div':

     #define ceil_div(x, y) (((x) + (y) - 1) / (y))


File: cpp.info,  Node: Swallowing the Semicolon,  Next: Duplication of Side Effects,  Prev: Operator Precedence Problems,  Up: Macro Pitfalls

3.10.3 Swallowing the Semicolon
-------------------------------

Often it is desirable to define a macro that expands into a compound
statement.  Consider, for example, the following macro, that advances a
pointer (the argument 'p' says where to find it) across whitespace
characters:

     #define SKIP_SPACES(p, limit)  \
     { char *lim = (limit);         \
       while (p < lim) {            \
         if (*p++ != ' ') {         \
           p--; break; }}}

Here backslash-newline is used to split the macro definition, which must
be a single logical line, so that it resembles the way such code would
be laid out if not part of a macro definition.

   A call to this macro might be 'SKIP_SPACES (p, lim)'.  Strictly
speaking, the call expands to a compound statement, which is a complete
statement with no need for a semicolon to end it.  However, since it
looks like a function call, it minimizes confusion if you can use it
like a function call, writing a semicolon afterward, as in 'SKIP_SPACES
(p, lim);'

   This can cause trouble before 'else' statements, because the
semicolon is actually a null statement.  Suppose you write

     if (*p != 0)
       SKIP_SPACES (p, lim);
     else ...

The presence of two statements--the compound statement and a null
statement--in between the 'if' condition and the 'else' makes invalid C
code.

   The definition of the macro 'SKIP_SPACES' can be altered to solve
this problem, using a 'do ... while' statement.  Here is how:

     #define SKIP_SPACES(p, limit)     \
     do { char *lim = (limit);         \
          while (p < lim) {            \
            if (*p++ != ' ') {         \
              p--; break; }}}          \
     while (0)

   Now 'SKIP_SPACES (p, lim);' expands into

     do {...} while (0);

which is one statement.  The loop executes exactly once; most compilers
generate no extra code for it.


File: cpp.info,  Node: Duplication of Side Effects,  Next: Self-Referential Macros,  Prev: Swallowing the Semicolon,  Up: Macro Pitfalls

3.10.4 Duplication of Side Effects
----------------------------------

Many C programs define a macro 'min', for "minimum", like this:

     #define min(X, Y)  ((X) < (Y) ? (X) : (Y))

   When you use this macro with an argument containing a side effect, as
shown here,

     next = min (x + y, foo (z));

it expands as follows:

     next = ((x + y) < (foo (z)) ? (x + y) : (foo (z)));

where 'x + y' has been substituted for 'X' and 'foo (z)' for 'Y'.

   The function 'foo' is used only once in the statement as it appears
in the program, but the expression 'foo (z)' has been substituted twice
into the macro expansion.  As a result, 'foo' might be called two times
when the statement is executed.  If it has side effects or if it takes a
long time to compute, the results might not be what you intended.  We
say that 'min' is an "unsafe" macro.

   The best solution to this problem is to define 'min' in a way that
computes the value of 'foo (z)' only once.  The C language offers no
standard way to do this, but it can be done with GNU extensions as
follows:

     #define min(X, Y)                \
     ({ typeof (X) x_ = (X);          \
        typeof (Y) y_ = (Y);          \
        (x_ < y_) ? x_ : y_; })

   The '({ ... })' notation produces a compound statement that acts as
an expression.  Its value is the value of its last statement.  This
permits us to define local variables and assign each argument to one.
The local variables have underscores after their names to reduce the
risk of conflict with an identifier of wider scope (it is impossible to
avoid this entirely).  Now each argument is evaluated exactly once.

   If you do not wish to use GNU C extensions, the only solution is to
be careful when _using_ the macro 'min'.  For example, you can calculate
the value of 'foo (z)', save it in a variable, and use that variable in
'min':

     #define min(X, Y)  ((X) < (Y) ? (X) : (Y))
     ...
     {
       int tem = foo (z);
       next = min (x + y, tem);
     }

(where we assume that 'foo' returns type 'int').


File: cpp.info,  Node: Self-Referential Macros,  Next: Argument Prescan,  Prev: Duplication of Side Effects,  Up: Macro Pitfalls

3.10.5 Self-Referential Macros
------------------------------

A "self-referential" macro is one whose name appears in its definition.
Recall that all macro definitions are rescanned for more macros to
replace.  If the self-reference were considered a use of the macro, it
would produce an infinitely large expansion.  To prevent this, the
self-reference is not considered a macro call.  It is passed into the
preprocessor output unchanged.  Consider an example:

     #define foo (4 + foo)

where 'foo' is also a variable in your program.

   Following the ordinary rules, each reference to 'foo' will expand
into '(4 + foo)'; then this will be rescanned and will expand into '(4 +
(4 + foo))'; and so on until the computer runs out of memory.

   The self-reference rule cuts this process short after one step, at
'(4 + foo)'.  Therefore, this macro definition has the possibly useful
effect of causing the program to add 4 to the value of 'foo' wherever
'foo' is referred to.

   In most cases, it is a bad idea to take advantage of this feature.  A
person reading the program who sees that 'foo' is a variable will not
expect that it is a macro as well.  The reader will come across the
identifier 'foo' in the program and think its value should be that of
the variable 'foo', whereas in fact the value is four greater.

   One common, useful use of self-reference is to create a macro which
expands to itself.  If you write

     #define EPERM EPERM

then the macro 'EPERM' expands to 'EPERM'.  Effectively, it is left
alone by the preprocessor whenever it's used in running text.  You can
tell that it's a macro with '#ifdef'.  You might do this if you want to
define numeric constants with an 'enum', but have '#ifdef' be true for
each constant.

   If a macro 'x' expands to use a macro 'y', and the expansion of 'y'
refers to the macro 'x', that is an "indirect self-reference" of 'x'.
'x' is not expanded in this case either.  Thus, if we have

     #define x (4 + y)
     #define y (2 * x)

then 'x' and 'y' expand as follows:

     x    ==> (4 + y)
          ==> (4 + (2 * x))

     y    ==> (2 * x)
          ==> (2 * (4 + y))

Each macro is expanded when it appears in the definition of the other
macro, but not when it indirectly appears in its own definition.


File: cpp.info,  Node: Argument Prescan,  Next: Newlines in Arguments,  Prev: Self-Referential Macros,  Up: Macro Pitfalls

3.10.6 Argument Prescan
-----------------------

Macro arguments are completely macro-expanded before they are
substituted into a macro body, unless they are stringized or pasted with
other tokens.  After substitution, the entire macro body, including the
substituted arguments, is scanned again for macros to be expanded.  The
result is that the arguments are scanned _twice_ to expand macro calls
in them.

   Most of the time, this has no effect.  If the argument contained any
macro calls, they are expanded during the first scan.  The result
therefore contains no macro calls, so the second scan does not change
it.  If the argument were substituted as given, with no prescan, the
single remaining scan would find the same macro calls and produce the
same results.

   You might expect the double scan to change the results when a
self-referential macro is used in an argument of another macro (*note
Self-Referential Macros::): the self-referential macro would be expanded
once in the first scan, and a second time in the second scan.  However,
this is not what happens.  The self-references that do not expand in the
first scan are marked so that they will not expand in the second scan
either.

   You might wonder, "Why mention the prescan, if it makes no
difference?  And why not skip it and make the preprocessor faster?"  The
answer is that the prescan does make a difference in three special
cases:

   * Nested calls to a macro.

     We say that "nested" calls to a macro occur when a macro's argument
     contains a call to that very macro.  For example, if 'f' is a macro
     that expects one argument, 'f (f (1))' is a nested pair of calls to
     'f'.  The desired expansion is made by expanding 'f (1)' and
     substituting that into the definition of 'f'.  The prescan causes
     the expected result to happen.  Without the prescan, 'f (1)' itself
     would be substituted as an argument, and the inner use of 'f' would
     appear during the main scan as an indirect self-reference and would
     not be expanded.

   * Macros that call other macros that stringize or concatenate.

     If an argument is stringized or concatenated, the prescan does not
     occur.  If you _want_ to expand a macro, then stringize or
     concatenate its expansion, you can do that by causing one macro to
     call another macro that does the stringizing or concatenation.  For
     instance, if you have

          #define AFTERX(x) X_ ## x
          #define XAFTERX(x) AFTERX(x)
          #define TABLESIZE 1024
          #define BUFSIZE TABLESIZE

     then 'AFTERX(BUFSIZE)' expands to 'X_BUFSIZE', and
     'XAFTERX(BUFSIZE)' expands to 'X_1024'.  (Not to 'X_TABLESIZE'.
     Prescan always does a complete expansion.)

   * Macros used in arguments, whose expansions contain unshielded
     commas.

     This can cause a macro expanded on the second scan to be called
     with the wrong number of arguments.  Here is an example:

          #define foo  a,b
          #define bar(x) lose(x)
          #define lose(x) (1 + (x))

     We would like 'bar(foo)' to turn into '(1 + (foo))', which would
     then turn into '(1 + (a,b))'.  Instead, 'bar(foo)' expands into
     'lose(a,b)', and you get an error because 'lose' requires a single
     argument.  In this case, the problem is easily solved by the same
     parentheses that ought to be used to prevent misnesting of
     arithmetic operations:

          #define foo (a,b)
     or
          #define bar(x) lose((x))

     The extra pair of parentheses prevents the comma in 'foo''s
     definition from being interpreted as an argument separator.


File: cpp.info,  Node: Newlines in Arguments,  Prev: Argument Prescan,  Up: Macro Pitfalls

3.10.7 Newlines in Arguments
----------------------------

The invocation of a function-like macro can extend over many logical
lines.  However, in the present implementation, the entire expansion
comes out on one line.  Thus line numbers emitted by the compiler or
debugger refer to the line the invocation started on, which might be
different to the line containing the argument causing the problem.

   Here is an example illustrating this:

     #define ignore_second_arg(a,b,c) a; c

     ignore_second_arg (foo (),
                        ignored (),
                        syntax error);

The syntax error triggered by the tokens 'syntax error' results in an
error message citing line three--the line of ignore_second_arg-- even
though the problematic code comes from line five.

   We consider this a bug, and intend to fix it in the near future.


File: cpp.info,  Node: Conditionals,  Next: Diagnostics,  Prev: Macros,  Up: Top

4 Conditionals
**************

A "conditional" is a directive that instructs the preprocessor to select
whether or not to include a chunk of code in the final token stream
passed to the compiler.  Preprocessor conditionals can test arithmetic
expressions, or whether a name is defined as a macro, or both
simultaneously using the special 'defined' operator.

   A conditional in the C preprocessor resembles in some ways an 'if'
statement in C, but it is important to understand the difference between
them.  The condition in an 'if' statement is tested during the execution
of your program.  Its purpose is to allow your program to behave
differently from run to run, depending on the data it is operating on.
The condition in a preprocessing conditional directive is tested when
your program is compiled.  Its purpose is to allow different code to be
included in the program depending on the situation at the time of
compilation.

   However, the distinction is becoming less clear.  Modern compilers
often do test 'if' statements when a program is compiled, if their
conditions are known not to vary at run time, and eliminate code which
can never be executed.  If you can count on your compiler to do this,
you may find that your program is more readable if you use 'if'
statements with constant conditions (perhaps determined by macros).  Of
course, you can only use this to exclude code, not type definitions or
other preprocessing directives, and you can only do it if the code
remains syntactically valid when it is not to be used.

* Menu:

* Conditional Uses::
* Conditional Syntax::
* Deleted Code::


File: cpp.info,  Node: Conditional Uses,  Next: Conditional Syntax,  Up: Conditionals

4.1 Conditional Uses
====================

There are three general reasons to use a conditional.

   * A program may need to use different code depending on the machine
     or operating system it is to run on.  In some cases the code for
     one operating system may be erroneous on another operating system;
     for example, it might refer to data types or constants that do not
     exist on the other system.  When this happens, it is not enough to
     avoid executing the invalid code.  Its mere presence will cause the
     compiler to reject the program.  With a preprocessing conditional,
     the offending code can be effectively excised from the program when
     it is not valid.

   * You may want to be able to compile the same source file into two
     different programs.  One version might make frequent time-consuming
     consistency checks on its intermediate data, or print the values of
     those data for debugging, and the other not.

   * A conditional whose condition is always false is one way to exclude
     code from the program but keep it as a sort of comment for future
     reference.

   Simple programs that do not need system-specific logic or complex
debugging hooks generally will not need to use preprocessing
conditionals.


File: cpp.info,  Node: Conditional Syntax,  Next: Deleted Code,  Prev: Conditional Uses,  Up: Conditionals

4.2 Conditional Syntax
======================

A conditional in the C preprocessor begins with a "conditional
directive": '#if', '#ifdef' or '#ifndef'.

* Menu:

* Ifdef::
* If::
* Defined::
* Else::
* Elif::
* __has_attribute::
* __has_cpp_attribute::
* __has_include::


File: cpp.info,  Node: Ifdef,  Next: If,  Up: Conditional Syntax

4.2.1 Ifdef
-----------

The simplest sort of conditional is

     #ifdef MACRO

     CONTROLLED TEXT

     #endif /* MACRO */

   This block is called a "conditional group".  CONTROLLED TEXT will be
included in the output of the preprocessor if and only if MACRO is
defined.  We say that the conditional "succeeds" if MACRO is defined,
"fails" if it is not.

   The CONTROLLED TEXT inside of a conditional can include preprocessing
directives.  They are executed only if the conditional succeeds.  You
can nest conditional groups inside other conditional groups, but they
must be completely nested.  In other words, '#endif' always matches the
nearest '#ifdef' (or '#ifndef', or '#if').  Also, you cannot start a
conditional group in one file and end it in another.

   Even if a conditional fails, the CONTROLLED TEXT inside it is still
run through initial transformations and tokenization.  Therefore, it
must all be lexically valid C.  Normally the only way this matters is
that all comments and string literals inside a failing conditional group
must still be properly ended.

   The comment following the '#endif' is not required, but it is a good
practice if there is a lot of CONTROLLED TEXT, because it helps people
match the '#endif' to the corresponding '#ifdef'.  Older programs
sometimes put MACRO directly after the '#endif' without enclosing it in
a comment.  This is invalid code according to the C standard.  CPP
accepts it with a warning.  It never affects which '#ifndef' the
'#endif' matches.

   Sometimes you wish to use some code if a macro is _not_ defined.  You
can do this by writing '#ifndef' instead of '#ifdef'.  One common use of
'#ifndef' is to include code only the first time a header file is
included.  *Note Once-Only Headers::.

   Macro definitions can vary between compilations for several reasons.
Here are some samples.

   * Some macros are predefined on each kind of machine (*note
     System-specific Predefined Macros::).  This allows you to provide
     code specially tuned for a particular machine.

   * System header files define more macros, associated with the
     features they implement.  You can test these macros with
     conditionals to avoid using a system feature on a machine where it
     is not implemented.

   * Macros can be defined or undefined with the '-D' and '-U'
     command-line options when you compile the program.  You can arrange
     to compile the same source file into two different programs by
     choosing a macro name to specify which program you want, writing
     conditionals to test whether or how this macro is defined, and then
     controlling the state of the macro with command-line options,
     perhaps set in the Makefile.  *Note Invocation::.

   * Your program might have a special header file (often called
     'config.h') that is adjusted when the program is compiled.  It can
     define or not define macros depending on the features of the system
     and the desired capabilities of the program.  The adjustment can be
     automated by a tool such as 'autoconf', or done by hand.


File: cpp.info,  Node: If,  Next: Defined,  Prev: Ifdef,  Up: Conditional Syntax

4.2.2 If
--------

The '#if' directive allows you to test the value of an arithmetic
expression, rather than the mere existence of one macro.  Its syntax is

     #if EXPRESSION

     CONTROLLED TEXT

     #endif /* EXPRESSION */

   EXPRESSION is a C expression of integer type, subject to stringent
restrictions.  It may contain

   * Integer constants.

   * Character constants, which are interpreted as they would be in
     normal code.

   * Arithmetic operators for addition, subtraction, multiplication,
     division, bitwise operations, shifts, comparisons, and logical
     operations ('&&' and '||').  The latter two obey the usual
     short-circuiting rules of standard C.

   * Macros.  All macros in the expression are expanded before actual
     computation of the expression's value begins.

   * Uses of the 'defined' operator, which lets you check whether macros
     are defined in the middle of an '#if'.

   * Identifiers that are not macros, which are all considered to be the
     number zero.  This allows you to write '#if MACRO' instead of
     '#ifdef MACRO', if you know that MACRO, when defined, will always
     have a nonzero value.  Function-like macros used without their
     function call parentheses are also treated as zero.

     In some contexts this shortcut is undesirable.  The '-Wundef'
     option causes GCC to warn whenever it encounters an identifier
     which is not a macro in an '#if'.

   The preprocessor does not know anything about types in the language.
Therefore, 'sizeof' operators are not recognized in '#if', and neither
are 'enum' constants.  They will be taken as identifiers which are not
macros, and replaced by zero.  In the case of 'sizeof', this is likely
to cause the expression to be invalid.

   The preprocessor calculates the value of EXPRESSION.  It carries out
all calculations in the widest integer type known to the compiler; on
most machines supported by GCC this is 64 bits.  This is not the same
rule as the compiler uses to calculate the value of a constant
expression, and may give different results in some cases.  If the value
comes out to be nonzero, the '#if' succeeds and the CONTROLLED TEXT is
included; otherwise it is skipped.


File: cpp.info,  Node: Defined,  Next: Else,  Prev: If,  Up: Conditional Syntax

4.2.3 Defined
-------------

The special operator 'defined' is used in '#if' and '#elif' expressions
to test whether a certain name is defined as a macro.  'defined NAME'
and 'defined (NAME)' are both expressions whose value is 1 if NAME is
defined as a macro at the current point in the program, and 0 otherwise.
Thus, '#if defined MACRO' is precisely equivalent to '#ifdef MACRO'.

   'defined' is useful when you wish to test more than one macro for
existence at once.  For example,

     #if defined (__vax__) || defined (__ns16000__)

would succeed if either of the names '__vax__' or '__ns16000__' is
defined as a macro.

   Conditionals written like this:

     #if defined BUFSIZE && BUFSIZE >= 1024

can generally be simplified to just '#if BUFSIZE >= 1024', since if
'BUFSIZE' is not defined, it will be interpreted as having the value
zero.

   If the 'defined' operator appears as a result of a macro expansion,
the C standard says the behavior is undefined.  GNU cpp treats it as a
genuine 'defined' operator and evaluates it normally.  It will warn
wherever your code uses this feature if you use the command-line option
'-Wpedantic', since other compilers may handle it differently.  The
warning is also enabled by '-Wextra', and can also be enabled
individually with '-Wexpansion-to-defined'.


File: cpp.info,  Node: Else,  Next: Elif,  Prev: Defined,  Up: Conditional Syntax

4.2.4 Else
----------

The '#else' directive can be added to a conditional to provide
alternative text to be used if the condition fails.  This is what it
looks like:

     #if EXPRESSION
     TEXT-IF-TRUE
     #else /* Not EXPRESSION */
     TEXT-IF-FALSE
     #endif /* Not EXPRESSION */

If EXPRESSION is nonzero, the TEXT-IF-TRUE is included and the
TEXT-IF-FALSE is skipped.  If EXPRESSION is zero, the opposite happens.

   You can use '#else' with '#ifdef' and '#ifndef', too.


File: cpp.info,  Node: Elif,  Next: __has_attribute,  Prev: Else,  Up: Conditional Syntax

4.2.5 Elif
----------

One common case of nested conditionals is used to check for more than
two possible alternatives.  For example, you might have

     #if X == 1
     ...
     #else /* X != 1 */
     #if X == 2
     ...
     #else /* X != 2 */
     ...
     #endif /* X != 2 */
     #endif /* X != 1 */

   Another conditional directive, '#elif', allows this to be abbreviated
as follows:

     #if X == 1
     ...
     #elif X == 2
     ...
     #else /* X != 2 and X != 1*/
     ...
     #endif /* X != 2 and X != 1*/

   '#elif' stands for "else if".  Like '#else', it goes in the middle of
a conditional group and subdivides it; it does not require a matching
'#endif' of its own.  Like '#if', the '#elif' directive includes an
expression to be tested.  The text following the '#elif' is processed
only if the original '#if'-condition failed and the '#elif' condition
succeeds.

   More than one '#elif' can go in the same conditional group.  Then the
text after each '#elif' is processed only if the '#elif' condition
succeeds after the original '#if' and all previous '#elif' directives
within it have failed.

   '#else' is allowed after any number of '#elif' directives, but
'#elif' may not follow '#else'.


File: cpp.info,  Node: __has_attribute,  Next: __has_cpp_attribute,  Prev: Elif,  Up: Conditional Syntax

4.2.6 '__has_attribute'
-----------------------

The special operator '__has_attribute (OPERAND)' may be used in '#if'
and '#elif' expressions to test whether the attribute referenced by its
OPERAND is recognized by GCC. Using the operator in other contexts is
not valid.  In C code, OPERAND must be a valid identifier.  In C++ code,
OPERAND may be optionally introduced by the 'ATTRIBUTE-SCOPE::' prefix.
The ATTRIBUTE-SCOPE prefix identifies the "namespace" within which the
attribute is recognized.  The scope of GCC attributes is 'gnu' or
'__gnu__'.  The '__has_attribute' operator by itself, without any
OPERAND or parentheses, acts as a predefined macro so that support for
it can be tested in portable code.  Thus, the recommended use of the
operator is as follows:

     #if defined __has_attribute
     #  if __has_attribute (nonnull)
     #    define ATTR_NONNULL __attribute__ ((nonnull))
     #  endif
     #endif

   The first '#if' test succeeds only when the operator is supported by
the version of GCC (or another compiler) being used.  Only when that
test succeeds is it valid to use '__has_attribute' as a preprocessor
operator.  As a result, combining the two tests into a single expression
as shown below would only be valid with a compiler that supports the
operator but not with others that don't.

     #if defined __has_attribute && __has_attribute (nonnull)   /* not portable */
     ...
     #endif


File: cpp.info,  Node: __has_cpp_attribute,  Next: __has_include,  Prev: __has_attribute,  Up: Conditional Syntax

4.2.7 '__has_cpp_attribute'
---------------------------

The special operator '__has_cpp_attribute (OPERAND)' may be used in
'#if' and '#elif' expressions in C++ code to test whether the attribute
referenced by its OPERAND is recognized by GCC. '__has_cpp_attribute
(OPERAND)' is equivalent to '__has_attribute (OPERAND)' except that when
OPERAND designates a supported standard attribute it evaluates to an
integer constant of the form 'YYYYMM' indicating the year and month when
the attribute was first introduced into the C++ standard.  For
additional information including the dates of the introduction of
current standard attributes, see
SD-6: SG10 Feature Test Recommendations (https://isocpp.org/std/standing-documents/sd-6-sg10-feature-test-recommendations/).


File: cpp.info,  Node: __has_include,  Prev: __has_cpp_attribute,  Up: Conditional Syntax

4.2.8 '__has_include'
---------------------

The special operator '__has_include (OPERAND)' may be used in '#if' and
'#elif' expressions to test whether the header referenced by its OPERAND
can be included using the '#include' directive.  Using the operator in
other contexts is not valid.  The OPERAND takes the same form as the
file in the '#include' directive (*note Include Syntax::) and evaluates
to a nonzero value if the header can be included and to zero otherwise.
Note that that the ability to include a header doesn't imply that the
header doesn't contain invalid constructs or '#error' directives that
would cause the preprocessor to fail.

   The '__has_include' operator by itself, without any OPERAND or
parentheses, acts as a predefined macro so that support for it can be
tested in portable code.  Thus, the recommended use of the operator is
as follows:

     #if defined __has_include
     #  if __has_include (<stdatomic.h>)
     #    include <stdatomic.h>
     #  endif
     #endif

   The first '#if' test succeeds only when the operator is supported by
the version of GCC (or another compiler) being used.  Only when that
test succeeds is it valid to use '__has_include' as a preprocessor
operator.  As a result, combining the two tests into a single expression
as shown below would only be valid with a compiler that supports the
operator but not with others that don't.

     #if defined __has_include && __has_include ("header.h")   /* not portable */
     ...
     #endif


File: cpp.info,  Node: Deleted Code,  Prev: Conditional Syntax,  Up: Conditionals

4.3 Deleted Code
================

If you replace or delete a part of the program but want to keep the old
code around for future reference, you often cannot simply comment it
out.  Block comments do not nest, so the first comment inside the old
code will end the commenting-out.  The probable result is a flood of
syntax errors.

   One way to avoid this problem is to use an always-false conditional
instead.  For instance, put '#if 0' before the deleted code and '#endif'
after it.  This works even if the code being turned off contains
conditionals, but they must be entire conditionals (balanced '#if' and
'#endif').

   Some people use '#ifdef notdef' instead.  This is risky, because
'notdef' might be accidentally defined as a macro, and then the
conditional would succeed.  '#if 0' can be counted on to fail.

   Do not use '#if 0' for comments which are not C code.  Use a real
comment, instead.  The interior of '#if 0' must consist of complete
tokens; in particular, single-quote characters must balance.  Comments
often contain unbalanced single-quote characters (known in English as
apostrophes).  These confuse '#if 0'.  They don't confuse '/*'.


File: cpp.info,  Node: Diagnostics,  Next: Line Control,  Prev: Conditionals,  Up: Top

5 Diagnostics
*************

The directive '#error' causes the preprocessor to report a fatal error.
The tokens forming the rest of the line following '#error' are used as
the error message.

   You would use '#error' inside of a conditional that detects a
combination of parameters which you know the program does not properly
support.  For example, if you know that the program will not run
properly on a VAX, you might write

     #ifdef __vax__
     #error "Won't work on VAXen.  See comments at get_last_object."
     #endif

   If you have several configuration parameters that must be set up by
the installation in a consistent way, you can use conditionals to detect
an inconsistency and report it with '#error'.  For example,

     #if !defined(FOO) && defined(BAR)
     #error "BAR requires FOO."
     #endif

   The directive '#warning' is like '#error', but causes the
preprocessor to issue a warning and continue preprocessing.  The tokens
following '#warning' are used as the warning message.

   You might use '#warning' in obsolete header files, with a message
directing the user to the header file which should be used instead.

   Neither '#error' nor '#warning' macro-expands its argument.  Internal
whitespace sequences are each replaced with a single space.  The line
must consist of complete tokens.  It is wisest to make the argument of
these directives be a single string constant; this avoids problems with
apostrophes and the like.


File: cpp.info,  Node: Line Control,  Next: Pragmas,  Prev: Diagnostics,  Up: Top

6 Line Control
**************

The C preprocessor informs the C compiler of the location in your source
code where each token came from.  Presently, this is just the file name
and line number.  All the tokens resulting from macro expansion are
reported as having appeared on the line of the source file where the
outermost macro was used.  We intend to be more accurate in the future.

   If you write a program which generates source code, such as the
'bison' parser generator, you may want to adjust the preprocessor's
notion of the current file name and line number by hand.  Parts of the
output from 'bison' are generated from scratch, other parts come from a
standard parser file.  The rest are copied verbatim from 'bison''s
input.  You would like compiler error messages and symbolic debuggers to
be able to refer to 'bison''s input file.

   'bison' or any such program can arrange this by writing '#line'
directives into the output file.  '#line' is a directive that specifies
the original line number and source file name for subsequent input in
the current preprocessor input file.  '#line' has three variants:

'#line LINENUM'
     LINENUM is a non-negative decimal integer constant.  It specifies
     the line number which should be reported for the following line of
     input.  Subsequent lines are counted from LINENUM.

'#line LINENUM FILENAME'
     LINENUM is the same as for the first form, and has the same effect.
     In addition, FILENAME is a string constant.  The following line and
     all subsequent lines are reported to come from the file it
     specifies, until something else happens to change that.  FILENAME
     is interpreted according to the normal rules for a string constant:
     backslash escapes are interpreted.  This is different from
     '#include'.

'#line ANYTHING ELSE'
     ANYTHING ELSE is checked for macro calls, which are expanded.  The
     result should match one of the above two forms.

   '#line' directives alter the results of the '__FILE__' and '__LINE__'
predefined macros from that point on.  *Note Standard Predefined
Macros::.  They do not have any effect on '#include''s idea of the
directory containing the current file.


File: cpp.info,  Node: Pragmas,  Next: Other Directives,  Prev: Line Control,  Up: Top

7 Pragmas
*********

The '#pragma' directive is the method specified by the C standard for
providing additional information to the compiler, beyond what is
conveyed in the language itself.  The forms of this directive (commonly
known as "pragmas") specified by C standard are prefixed with 'STDC'.  A
C compiler is free to attach any meaning it likes to other pragmas.
Most GNU-defined, supported pragmas have been given a 'GCC' prefix.

   C99 introduced the '_Pragma' operator.  This feature addresses a
major problem with '#pragma': being a directive, it cannot be produced
as the result of macro expansion.  '_Pragma' is an operator, much like
'sizeof' or 'defined', and can be embedded in a macro.

   Its syntax is '_Pragma (STRING-LITERAL)', where STRING-LITERAL can be
either a normal or wide-character string literal.  It is destringized,
by replacing all '\\' with a single '\' and all '\"' with a '"'.  The
result is then processed as if it had appeared as the right hand side of
a '#pragma' directive.  For example,

     _Pragma ("GCC dependency \"parse.y\"")

has the same effect as '#pragma GCC dependency "parse.y"'.  The same
effect could be achieved using macros, for example

     #define DO_PRAGMA(x) _Pragma (#x)
     DO_PRAGMA (GCC dependency "parse.y")

   The standard is unclear on where a '_Pragma' operator can appear.
The preprocessor does not accept it within a preprocessing conditional
directive like '#if'.  To be safe, you are probably best keeping it out
of directives other than '#define', and putting it on a line of its own.

   This manual documents the pragmas which are meaningful to the
preprocessor itself.  Other pragmas are meaningful to the C or C++
compilers.  They are documented in the GCC manual.

   GCC plugins may provide their own pragmas.

'#pragma GCC dependency'
     '#pragma GCC dependency' allows you to check the relative dates of
     the current file and another file.  If the other file is more
     recent than the current file, a warning is issued.  This is useful
     if the current file is derived from the other file, and should be
     regenerated.  The other file is searched for using the normal
     include search path.  Optional trailing text can be used to give
     more information in the warning message.

          #pragma GCC dependency "parse.y"
          #pragma GCC dependency "/usr/include/time.h" rerun fixincludes

'#pragma GCC poison'
     Sometimes, there is an identifier that you want to remove
     completely from your program, and make sure that it never creeps
     back in.  To enforce this, you can "poison" the identifier with
     this pragma.  '#pragma GCC poison' is followed by a list of
     identifiers to poison.  If any of those identifiers appears
     anywhere in the source after the directive, it is a hard error.
     For example,

          #pragma GCC poison printf sprintf fprintf
          sprintf(some_string, "hello");

     will produce an error.

     If a poisoned identifier appears as part of the expansion of a
     macro which was defined before the identifier was poisoned, it will
     _not_ cause an error.  This lets you poison an identifier without
     worrying about system headers defining macros that use it.

     For example,

          #define strrchr rindex
          #pragma GCC poison rindex
          strrchr(some_string, 'h');

     will not produce an error.

'#pragma GCC system_header'
     This pragma takes no arguments.  It causes the rest of the code in
     the current file to be treated as if it came from a system header.
     *Note System Headers::.

'#pragma GCC warning'
'#pragma GCC error'
     '#pragma GCC warning "message"' causes the preprocessor to issue a
     warning diagnostic with the text 'message'.  The message contained
     in the pragma must be a single string literal.  Similarly, '#pragma
     GCC error "message"' issues an error message.  Unlike the
     '#warning' and '#error' directives, these pragmas can be embedded
     in preprocessor macros using '_Pragma'.

'#pragma once'
     If '#pragma once' is seen when scanning a header file, that file
     will never be read again, no matter what.  It is a less-portable
     alternative to using '#ifndef' to guard the contents of header
     files against multiple inclusions.


File: cpp.info,  Node: Other Directives,  Next: Preprocessor Output,  Prev: Pragmas,  Up: Top

8 Other Directives
******************

The '#ident' directive takes one argument, a string constant.  On some
systems, that string constant is copied into a special segment of the
object file.  On other systems, the directive is ignored.  The '#sccs'
directive is a synonym for '#ident'.

   These directives are not part of the C standard, but they are not
official GNU extensions either.  What historical information we have
been able to find, suggests they originated with System V.

   The "null directive" consists of a '#' followed by a newline, with
only whitespace (including comments) in between.  A null directive is
understood as a preprocessing directive but has no effect on the
preprocessor output.  The primary significance of the existence of the
null directive is that an input line consisting of just a '#' will
produce no output, rather than a line of output containing just a '#'.
Supposedly some old C programs contain such lines.


File: cpp.info,  Node: Preprocessor Output,  Next: Traditional Mode,  Prev: Other Directives,  Up: Top

9 Preprocessor Output
*********************

When the C preprocessor is used with the C, C++, or Objective-C
compilers, it is integrated into the compiler and communicates a stream
of binary tokens directly to the compiler's parser.  However, it can
also be used in the more conventional standalone mode, where it produces
textual output.

   The output from the C preprocessor looks much like the input, except
that all preprocessing directive lines have been replaced with blank
lines and all comments with spaces.  Long runs of blank lines are
discarded.

   The ISO standard specifies that it is implementation defined whether
a preprocessor preserves whitespace between tokens, or replaces it with
e.g. a single space.  In GNU CPP, whitespace between tokens is collapsed
to become a single space, with the exception that the first token on a
non-directive line is preceded with sufficient spaces that it appears in
the same column in the preprocessed output that it appeared in the
original source file.  This is so the output is easy to read.  CPP does
not insert any whitespace where there was none in the original source,
except where necessary to prevent an accidental token paste.

   Source file name and line number information is conveyed by lines of
the form

     # LINENUM FILENAME FLAGS

These are called "linemarkers".  They are inserted as needed into the
output (but never within a string or character constant).  They mean
that the following line originated in file FILENAME at line LINENUM.
FILENAME will never contain any non-printing characters; they are
replaced with octal escape sequences.

   After the file name comes zero or more flags, which are '1', '2',
'3', or '4'.  If there are multiple flags, spaces separate them.  Here
is what the flags mean:

'1'
     This indicates the start of a new file.
'2'
     This indicates returning to a file (after having included another
     file).
'3'
     This indicates that the following text comes from a system header
     file, so certain warnings should be suppressed.
'4'
     This indicates that the following text should be treated as being
     wrapped in an implicit 'extern "C"' block.

   As an extension, the preprocessor accepts linemarkers in
non-assembler input files.  They are treated like the corresponding
'#line' directive, (*note Line Control::), except that trailing flags
are permitted, and are interpreted with the meanings described above.
If multiple flags are given, they must be in ascending order.

   Some directives may be duplicated in the output of the preprocessor.
These are '#ident' (always), '#pragma' (only if the preprocessor does
not handle the pragma itself), and '#define' and '#undef' (with certain
debugging options).  If this happens, the '#' of the directive will
always be in the first column, and there will be no space between the
'#' and the directive name.  If macro expansion happens to generate
tokens which might be mistaken for a duplicated directive, a space will
be inserted between the '#' and the directive name.


File: cpp.info,  Node: Traditional Mode,  Next: Implementation Details,  Prev: Preprocessor Output,  Up: Top

10 Traditional Mode
*******************

Traditional (pre-standard) C preprocessing is rather different from the
preprocessing specified by the standard.  When the preprocessor is
invoked with the '-traditional-cpp' option, it attempts to emulate a
traditional preprocessor.

   This mode is not useful for compiling C code with GCC, but is
intended for use with non-C preprocessing applications.  Thus
traditional mode semantics are supported only when invoking the
preprocessor explicitly, and not in the compiler front ends.

   The implementation does not correspond precisely to the behavior of
early pre-standard versions of GCC, nor to any true traditional
preprocessor.  After all, inconsistencies among traditional
implementations were a major motivation for C standardization.  However,
we intend that it should be compatible with true traditional
preprocessors in all ways that actually matter.

* Menu:

* Traditional lexical analysis::
* Traditional macros::
* Traditional miscellany::
* Traditional warnings::


File: cpp.info,  Node: Traditional lexical analysis,  Next: Traditional macros,  Up: Traditional Mode

10.1 Traditional lexical analysis
=================================

The traditional preprocessor does not decompose its input into tokens
the same way a standards-conforming preprocessor does.  The input is
simply treated as a stream of text with minimal internal form.

   This implementation does not treat trigraphs (*note trigraphs::)
specially since they were an invention of the standards committee.  It
handles arbitrarily-positioned escaped newlines properly and splices the
lines as you would expect; many traditional preprocessors did not do
this.

   The form of horizontal whitespace in the input file is preserved in
the output.  In particular, hard tabs remain hard tabs.  This can be
useful if, for example, you are preprocessing a Makefile.

   Traditional CPP only recognizes C-style block comments, and treats
the '/*' sequence as introducing a comment only if it lies outside
quoted text.  Quoted text is introduced by the usual single and double
quotes, and also by an initial '<' in a '#include' directive.

   Traditionally, comments are completely removed and are not replaced
with a space.  Since a traditional compiler does its own tokenization of
the output of the preprocessor, this means that comments can effectively
be used as token paste operators.  However, comments behave like
separators for text handled by the preprocessor itself, since it doesn't
re-lex its input.  For example, in

     #if foo/**/bar

'foo' and 'bar' are distinct identifiers and expanded separately if they
happen to be macros.  In other words, this directive is equivalent to

     #if foo bar

rather than

     #if foobar

   Generally speaking, in traditional mode an opening quote need not
have a matching closing quote.  In particular, a macro may be defined
with replacement text that contains an unmatched quote.  Of course, if
you attempt to compile preprocessed output containing an unmatched quote
you will get a syntax error.

   However, all preprocessing directives other than '#define' require
matching quotes.  For example:

     #define m This macro's fine and has an unmatched quote
     "/* This is not a comment.  */
     /* This is a comment.  The following #include directive
        is ill-formed.  */
     #include <stdio.h

   Just as for the ISO preprocessor, what would be a closing quote can
be escaped with a backslash to prevent the quoted text from closing.


File: cpp.info,  Node: Traditional macros,  Next: Traditional miscellany,  Prev: Traditional lexical analysis,  Up: Traditional Mode

10.2 Traditional macros
=======================

The major difference between traditional and ISO macros is that the
former expand to text rather than to a token sequence.  CPP removes all
leading and trailing horizontal whitespace from a macro's replacement
text before storing it, but preserves the form of internal whitespace.

   One consequence is that it is legitimate for the replacement text to
contain an unmatched quote (*note Traditional lexical analysis::).  An
unclosed string or character constant continues into the text following
the macro call.  Similarly, the text at the end of a macro's expansion
can run together with the text after the macro invocation to produce a
single token.

   Normally comments are removed from the replacement text after the
macro is expanded, but if the '-CC' option is passed on the command-line
comments are preserved.  (In fact, the current implementation removes
comments even before saving the macro replacement text, but it careful
to do it in such a way that the observed effect is identical even in the
function-like macro case.)

   The ISO stringizing operator '#' and token paste operator '##' have
no special meaning.  As explained later, an effect similar to these
operators can be obtained in a different way.  Macro names that are
embedded in quotes, either from the main file or after macro
replacement, do not expand.

   CPP replaces an unquoted object-like macro name with its replacement
text, and then rescans it for further macros to replace.  Unlike
standard macro expansion, traditional macro expansion has no provision
to prevent recursion.  If an object-like macro appears unquoted in its
replacement text, it will be replaced again during the rescan pass, and
so on _ad infinitum_.  GCC detects when it is expanding recursive
macros, emits an error message, and continues after the offending macro
invocation.

     #define PLUS +
     #define INC(x) PLUS+x
     INC(foo);
          ==> ++foo;

   Function-like macros are similar in form but quite different in
behavior to their ISO counterparts.  Their arguments are contained
within parentheses, are comma-separated, and can cross physical lines.
Commas within nested parentheses are not treated as argument separators.
Similarly, a quote in an argument cannot be left unclosed; a following
comma or parenthesis that comes before the closing quote is treated like
any other character.  There is no facility for handling variadic macros.

   This implementation removes all comments from macro arguments, unless
the '-C' option is given.  The form of all other horizontal whitespace
in arguments is preserved, including leading and trailing whitespace.
In particular

     f( )

is treated as an invocation of the macro 'f' with a single argument
consisting of a single space.  If you want to invoke a function-like
macro that takes no arguments, you must not leave any whitespace between
the parentheses.

   If a macro argument crosses a new line, the new line is replaced with
a space when forming the argument.  If the previous line contained an
unterminated quote, the following line inherits the quoted state.

   Traditional preprocessors replace parameters in the replacement text
with their arguments regardless of whether the parameters are within
quotes or not.  This provides a way to stringize arguments.  For example

     #define str(x) "x"
     str(/* A comment */some text )
          ==> "some text "

Note that the comment is removed, but that the trailing space is
preserved.  Here is an example of using a comment to effect token
pasting.

     #define suffix(x) foo_/**/x
     suffix(bar)
          ==> foo_bar


File: cpp.info,  Node: Traditional miscellany,  Next: Traditional warnings,  Prev: Traditional macros,  Up: Traditional Mode

10.3 Traditional miscellany
===========================

Here are some things to be aware of when using the traditional
preprocessor.

   * Preprocessing directives are recognized only when their leading '#'
     appears in the first column.  There can be no whitespace between
     the beginning of the line and the '#', but whitespace can follow
     the '#'.

   * A true traditional C preprocessor does not recognize '#error' or
     '#pragma', and may not recognize '#elif'.  CPP supports all the
     directives in traditional mode that it supports in ISO mode,
     including extensions, with the exception that the effects of
     '#pragma GCC poison' are undefined.

   * __STDC__ is not defined.

   * If you use digraphs the behavior is undefined.

   * If a line that looks like a directive appears within macro
     arguments, the behavior is undefined.


File: cpp.info,  Node: Traditional warnings,  Prev: Traditional miscellany,  Up: Traditional Mode

10.4 Traditional warnings
=========================

You can request warnings about features that did not exist, or worked
differently, in traditional C with the '-Wtraditional' option.  GCC does
not warn about features of ISO C which you must use when you are using a
conforming compiler, such as the '#' and '##' operators.

   Presently '-Wtraditional' warns about:

   * Macro parameters that appear within string literals in the macro
     body.  In traditional C macro replacement takes place within string
     literals, but does not in ISO C.

   * In traditional C, some preprocessor directives did not exist.
     Traditional preprocessors would only consider a line to be a
     directive if the '#' appeared in column 1 on the line.  Therefore
     '-Wtraditional' warns about directives that traditional C
     understands but would ignore because the '#' does not appear as the
     first character on the line.  It also suggests you hide directives
     like '#pragma' not understood by traditional C by indenting them.
     Some traditional implementations would not recognize '#elif', so it
     suggests avoiding it altogether.

   * A function-like macro that appears without an argument list.  In
     some traditional preprocessors this was an error.  In ISO C it
     merely means that the macro is not expanded.

   * The unary plus operator.  This did not exist in traditional C.

   * The 'U' and 'LL' integer constant suffixes, which were not
     available in traditional C.  (Traditional C does support the 'L'
     suffix for simple long integer constants.)  You are not warned
     about uses of these suffixes in macros defined in system headers.
     For instance, 'UINT_MAX' may well be defined as '4294967295U', but
     you will not be warned if you use 'UINT_MAX'.

     You can usually avoid the warning, and the related warning about
     constants which are so large that they are unsigned, by writing the
     integer constant in question in hexadecimal, with no U suffix.
     Take care, though, because this gives the wrong result in exotic
     cases.


File: cpp.info,  Node: Implementation Details,  Next: Invocation,  Prev: Traditional Mode,  Up: Top

11 Implementation Details
*************************

Here we document details of how the preprocessor's implementation
affects its user-visible behavior.  You should try to avoid undue
reliance on behavior described here, as it is possible that it will
change subtly in future implementations.

   Also documented here are obsolete features still supported by CPP.

* Menu:

* Implementation-defined behavior::
* Implementation limits::
* Obsolete Features::


File: cpp.info,  Node: Implementation-defined behavior,  Next: Implementation limits,  Up: Implementation Details

11.1 Implementation-defined behavior
====================================

This is how CPP behaves in all the cases which the C standard describes
as "implementation-defined".  This term means that the implementation is
free to do what it likes, but must document its choice and stick to it.

   * The mapping of physical source file multi-byte characters to the
     execution character set.

     The input character set can be specified using the
     '-finput-charset' option, while the execution character set may be
     controlled using the '-fexec-charset' and '-fwide-exec-charset'
     options.

   * Identifier characters.

     The C and C++ standards allow identifiers to be composed of '_' and
     the alphanumeric characters.  C++ also allows universal character
     names.  C99 and later C standards permit both universal character
     names and implementation-defined characters.

     GCC allows the '$' character in identifiers as an extension for
     most targets.  This is true regardless of the 'std=' switch, since
     this extension cannot conflict with standards-conforming programs.
     When preprocessing assembler, however, dollars are not identifier
     characters by default.

     Currently the targets that by default do not permit '$' are AVR,
     IP2K, MMIX, MIPS Irix 3, ARM aout, and PowerPC targets for the AIX
     operating system.

     You can override the default with '-fdollars-in-identifiers' or
     'fno-dollars-in-identifiers'.  *Note fdollars-in-identifiers::.

   * Non-empty sequences of whitespace characters.

     In textual output, each whitespace sequence is collapsed to a
     single space.  For aesthetic reasons, the first token on each
     non-directive line of output is preceded with sufficient spaces
     that it appears in the same column as it did in the original source
     file.

   * The numeric value of character constants in preprocessor
     expressions.

     The preprocessor and compiler interpret character constants in the
     same way; i.e. escape sequences such as '\a' are given the values
     they would have on the target machine.

     The compiler evaluates a multi-character character constant a
     character at a time, shifting the previous value left by the number
     of bits per target character, and then or-ing in the bit-pattern of
     the new character truncated to the width of a target character.
     The final bit-pattern is given type 'int', and is therefore signed,
     regardless of whether single characters are signed or not.  If
     there are more characters in the constant than would fit in the
     target 'int' the compiler issues a warning, and the excess leading
     characters are ignored.

     For example, ''ab'' for a target with an 8-bit 'char' would be
     interpreted as
     '(int) ((unsigned char) 'a' * 256 + (unsigned char) 'b')', and
     ''\234a'' as
     '(int) ((unsigned char) '\234' * 256 + (unsigned char) 'a')'.

   * Source file inclusion.

     For a discussion on how the preprocessor locates header files,
     *note Include Operation::.

   * Interpretation of the filename resulting from a macro-expanded
     '#include' directive.

     *Note Computed Includes::.

   * Treatment of a '#pragma' directive that after macro-expansion
     results in a standard pragma.

     No macro expansion occurs on any '#pragma' directive line, so the
     question does not arise.

     Note that GCC does not yet implement any of the standard pragmas.


File: cpp.info,  Node: Implementation limits,  Next: Obsolete Features,  Prev: Implementation-defined behavior,  Up: Implementation Details

11.2 Implementation limits
==========================

CPP has a small number of internal limits.  This section lists the
limits which the C standard requires to be no lower than some minimum,
and all the others known.  It is intended that there should be as few
limits as possible.  If you encounter an undocumented or inconvenient
limit, please report that as a bug.  *Note Reporting Bugs: (gcc)Bugs.

   Where we say something is limited "only by available memory", that
means that internal data structures impose no intrinsic limit, and space
is allocated with 'malloc' or equivalent.  The actual limit will
therefore depend on many things, such as the size of other things
allocated by the compiler at the same time, the amount of memory
consumed by other processes on the same computer, etc.

   * Nesting levels of '#include' files.

     We impose an arbitrary limit of 200 levels, to avoid runaway
     recursion.  The standard requires at least 15 levels.

   * Nesting levels of conditional inclusion.

     The C standard mandates this be at least 63.  CPP is limited only
     by available memory.

   * Levels of parenthesized expressions within a full expression.

     The C standard requires this to be at least 63.  In preprocessor
     conditional expressions, it is limited only by available memory.

   * Significant initial characters in an identifier or macro name.

     The preprocessor treats all characters as significant.  The C
     standard requires only that the first 63 be significant.

   * Number of macros simultaneously defined in a single translation
     unit.

     The standard requires at least 4095 be possible.  CPP is limited
     only by available memory.

   * Number of parameters in a macro definition and arguments in a macro
     call.

     We allow 'USHRT_MAX', which is no smaller than 65,535.  The minimum
     required by the standard is 127.

   * Number of characters on a logical source line.

     The C standard requires a minimum of 4096 be permitted.  CPP places
     no limits on this, but you may get incorrect column numbers
     reported in diagnostics for lines longer than 65,535 characters.

   * Maximum size of a source file.

     The standard does not specify any lower limit on the maximum size
     of a source file.  GNU cpp maps files into memory, so it is limited
     by the available address space.  This is generally at least two
     gigabytes.  Depending on the operating system, the size of physical
     memory may or may not be a limitation.


File: cpp.info,  Node: Obsolete Features,  Prev: Implementation limits,  Up: Implementation Details

11.3 Obsolete Features
======================

CPP has some features which are present mainly for compatibility with
older programs.  We discourage their use in new code.  In some cases, we
plan to remove the feature in a future version of GCC.

11.3.1 Assertions
-----------------

"Assertions" are a deprecated alternative to macros in writing
conditionals to test what sort of computer or system the compiled
program will run on.  Assertions are usually predefined, but you can
define them with preprocessing directives or command-line options.

   Assertions were intended to provide a more systematic way to describe
the compiler's target system and we added them for compatibility with
existing compilers.  In practice they are just as unpredictable as the
system-specific predefined macros.  In addition, they are not part of
any standard, and only a few compilers support them.  Therefore, the use
of assertions is *less* portable than the use of system-specific
predefined macros.  We recommend you do not use them at all.

   An assertion looks like this:

     #PREDICATE (ANSWER)

PREDICATE must be a single identifier.  ANSWER can be any sequence of
tokens; all characters are significant except for leading and trailing
whitespace, and differences in internal whitespace sequences are
ignored.  (This is similar to the rules governing macro redefinition.)
Thus, '(x + y)' is different from '(x+y)' but equivalent to '( x + y )'.
Parentheses do not nest inside an answer.

   To test an assertion, you write it in an '#if'.  For example, this
conditional succeeds if either 'vax' or 'ns16000' has been asserted as
an answer for 'machine'.

     #if #machine (vax) || #machine (ns16000)

You can test whether _any_ answer is asserted for a predicate by
omitting the answer in the conditional:

     #if #machine

   Assertions are made with the '#assert' directive.  Its sole argument
is the assertion to make, without the leading '#' that identifies
assertions in conditionals.

     #assert PREDICATE (ANSWER)

You may make several assertions with the same predicate and different
answers.  Subsequent assertions do not override previous ones for the
same predicate.  All the answers for any given predicate are
simultaneously true.

   Assertions can be canceled with the '#unassert' directive.  It has
the same syntax as '#assert'.  In that form it cancels only the answer
which was specified on the '#unassert' line; other answers for that
predicate remain true.  You can cancel an entire predicate by leaving
out the answer:

     #unassert PREDICATE

In either form, if no such assertion has been made, '#unassert' has no
effect.

   You can also make or cancel assertions using command-line options.
*Note Invocation::.


File: cpp.info,  Node: Invocation,  Next: Environment Variables,  Prev: Implementation Details,  Up: Top

12 Invocation
*************

Most often when you use the C preprocessor you do not have to invoke it
explicitly: the C compiler does so automatically.  However, the
preprocessor is sometimes useful on its own.  You can invoke the
preprocessor either with the 'cpp' command, or via 'gcc -E'.  In GCC,
the preprocessor is actually integrated with the compiler rather than a
separate program, and both of these commands invoke GCC and tell it to
stop after the preprocessing phase.

   The 'cpp' options listed here are also accepted by 'gcc' and have the
same meaning.  Likewise the 'cpp' command accepts all the usual 'gcc'
driver options, although those pertaining to compilation phases after
preprocessing are ignored.

   Only options specific to preprocessing behavior are documented here.
Refer to the GCC manual for full documentation of other driver options.

   The 'cpp' command expects two file names as arguments, INFILE and
OUTFILE.  The preprocessor reads INFILE together with any other files it
specifies with '#include'.  All the output generated by the combined
input files is written in OUTFILE.

   Either INFILE or OUTFILE may be '-', which as INFILE means to read
from standard input and as OUTFILE means to write to standard output.
If either file is omitted, it means the same as if '-' had been
specified for that file.  You can also use the '-o OUTFILE' option to
specify the output file.

   Unless otherwise noted, or the option ends in '=', all options which
take an argument may have that argument appear either immediately after
the option, or with a space between option and argument: '-Ifoo' and '-I
foo' have the same effect.

   Many options have multi-letter names; therefore multiple
single-letter options may _not_ be grouped: '-dM' is very different from
'-d -M'.

'-D NAME'
     Predefine NAME as a macro, with definition '1'.

'-D NAME=DEFINITION'
     The contents of DEFINITION are tokenized and processed as if they
     appeared during translation phase three in a '#define' directive.
     In particular, the definition is truncated by embedded newline
     characters.

     If you are invoking the preprocessor from a shell or shell-like
     program you may need to use the shell's quoting syntax to protect
     characters such as spaces that have a meaning in the shell syntax.

     If you wish to define a function-like macro on the command line,
     write its argument list with surrounding parentheses before the
     equals sign (if any).  Parentheses are meaningful to most shells,
     so you should quote the option.  With 'sh' and 'csh',
     '-D'NAME(ARGS...)=DEFINITION'' works.

     '-D' and '-U' options are processed in the order they are given on
     the command line.  All '-imacros FILE' and '-include FILE' options
     are processed after all '-D' and '-U' options.

'-U NAME'
     Cancel any previous definition of NAME, either built in or provided
     with a '-D' option.

'-include FILE'
     Process FILE as if '#include "file"' appeared as the first line of
     the primary source file.  However, the first directory searched for
     FILE is the preprocessor's working directory _instead of_ the
     directory containing the main source file.  If not found there, it
     is searched for in the remainder of the '#include "..."' search
     chain as normal.

     If multiple '-include' options are given, the files are included in
     the order they appear on the command line.

'-imacros FILE'
     Exactly like '-include', except that any output produced by
     scanning FILE is thrown away.  Macros it defines remain defined.
     This allows you to acquire all the macros from a header without
     also processing its declarations.

     All files specified by '-imacros' are processed before all files
     specified by '-include'.

'-undef'
     Do not predefine any system-specific or GCC-specific macros.  The
     standard predefined macros remain defined.  *Note Standard
     Predefined Macros::.

'-pthread'
     Define additional macros required for using the POSIX threads
     library.  You should use this option consistently for both
     compilation and linking.  This option is supported on GNU/Linux
     targets, most other Unix derivatives, and also on x86 Cygwin and
     MinGW targets.

'-M'
     Instead of outputting the result of preprocessing, output a rule
     suitable for 'make' describing the dependencies of the main source
     file.  The preprocessor outputs one 'make' rule containing the
     object file name for that source file, a colon, and the names of
     all the included files, including those coming from '-include' or
     '-imacros' command-line options.

     Unless specified explicitly (with '-MT' or '-MQ'), the object file
     name consists of the name of the source file with any suffix
     replaced with object file suffix and with any leading directory
     parts removed.  If there are many included files then the rule is
     split into several lines using '\'-newline.  The rule has no
     commands.

     This option does not suppress the preprocessor's debug output, such
     as '-dM'.  To avoid mixing such debug output with the dependency
     rules you should explicitly specify the dependency output file with
     '-MF', or use an environment variable like 'DEPENDENCIES_OUTPUT'
     (*note Environment Variables::).  Debug output is still sent to the
     regular output stream as normal.

     Passing '-M' to the driver implies '-E', and suppresses warnings
     with an implicit '-w'.

'-MM'
     Like '-M' but do not mention header files that are found in system
     header directories, nor header files that are included, directly or
     indirectly, from such a header.

     This implies that the choice of angle brackets or double quotes in
     an '#include' directive does not in itself determine whether that
     header appears in '-MM' dependency output.

'-MF FILE'
     When used with '-M' or '-MM', specifies a file to write the
     dependencies to.  If no '-MF' switch is given the preprocessor
     sends the rules to the same place it would send preprocessed
     output.

     When used with the driver options '-MD' or '-MMD', '-MF' overrides
     the default dependency output file.

     If FILE is '-', then the dependencies are written to 'stdout'.

'-MG'
     In conjunction with an option such as '-M' requesting dependency
     generation, '-MG' assumes missing header files are generated files
     and adds them to the dependency list without raising an error.  The
     dependency filename is taken directly from the '#include' directive
     without prepending any path.  '-MG' also suppresses preprocessed
     output, as a missing header file renders this useless.

     This feature is used in automatic updating of makefiles.

'-MP'
     This option instructs CPP to add a phony target for each dependency
     other than the main file, causing each to depend on nothing.  These
     dummy rules work around errors 'make' gives if you remove header
     files without updating the 'Makefile' to match.

     This is typical output:

          test.o: test.c test.h

          test.h:

'-MT TARGET'

     Change the target of the rule emitted by dependency generation.  By
     default CPP takes the name of the main input file, deletes any
     directory components and any file suffix such as '.c', and appends
     the platform's usual object suffix.  The result is the target.

     An '-MT' option sets the target to be exactly the string you
     specify.  If you want multiple targets, you can specify them as a
     single argument to '-MT', or use multiple '-MT' options.

     For example, '-MT '$(objpfx)foo.o'' might give

          $(objpfx)foo.o: foo.c

'-MQ TARGET'

     Same as '-MT', but it quotes any characters which are special to
     Make.  '-MQ '$(objpfx)foo.o'' gives

          $$(objpfx)foo.o: foo.c

     The default target is automatically quoted, as if it were given
     with '-MQ'.

'-MD'
     '-MD' is equivalent to '-M -MF FILE', except that '-E' is not
     implied.  The driver determines FILE based on whether an '-o'
     option is given.  If it is, the driver uses its argument but with a
     suffix of '.d', otherwise it takes the name of the input file,
     removes any directory components and suffix, and applies a '.d'
     suffix.

     If '-MD' is used in conjunction with '-E', any '-o' switch is
     understood to specify the dependency output file (*note -MF:
     dashMF.), but if used without '-E', each '-o' is understood to
     specify a target object file.

     Since '-E' is not implied, '-MD' can be used to generate a
     dependency output file as a side effect of the compilation process.

'-MMD'
     Like '-MD' except mention only user header files, not system header
     files.

'-fpreprocessed'
     Indicate to the preprocessor that the input file has already been
     preprocessed.  This suppresses things like macro expansion,
     trigraph conversion, escaped newline splicing, and processing of
     most directives.  The preprocessor still recognizes and removes
     comments, so that you can pass a file preprocessed with '-C' to the
     compiler without problems.  In this mode the integrated
     preprocessor is little more than a tokenizer for the front ends.

     '-fpreprocessed' is implicit if the input file has one of the
     extensions '.i', '.ii' or '.mi'.  These are the extensions that GCC
     uses for preprocessed files created by '-save-temps'.

'-fdirectives-only'
     When preprocessing, handle directives, but do not expand macros.

     The option's behavior depends on the '-E' and '-fpreprocessed'
     options.

     With '-E', preprocessing is limited to the handling of directives
     such as '#define', '#ifdef', and '#error'.  Other preprocessor
     operations, such as macro expansion and trigraph conversion are not
     performed.  In addition, the '-dD' option is implicitly enabled.

     With '-fpreprocessed', predefinition of command line and most
     builtin macros is disabled.  Macros such as '__LINE__', which are
     contextually dependent, are handled normally.  This enables
     compilation of files previously preprocessed with '-E
     -fdirectives-only'.

     With both '-E' and '-fpreprocessed', the rules for '-fpreprocessed'
     take precedence.  This enables full preprocessing of files
     previously preprocessed with '-E -fdirectives-only'.

'-fdollars-in-identifiers'
     Accept '$' in identifiers.  *Note Identifier characters::.

'-fextended-identifiers'
     Accept universal character names in identifiers.  This option is
     enabled by default for C99 (and later C standard versions) and C++.

'-fno-canonical-system-headers'
     When preprocessing, do not shorten system header paths with
     canonicalization.

'-ftabstop=WIDTH'
     Set the distance between tab stops.  This helps the preprocessor
     report correct column numbers in warnings or errors, even if tabs
     appear on the line.  If the value is less than 1 or greater than
     100, the option is ignored.  The default is 8.

'-ftrack-macro-expansion[=LEVEL]'
     Track locations of tokens across macro expansions.  This allows the
     compiler to emit diagnostic about the current macro expansion stack
     when a compilation error occurs in a macro expansion.  Using this
     option makes the preprocessor and the compiler consume more memory.
     The LEVEL parameter can be used to choose the level of precision of
     token location tracking thus decreasing the memory consumption if
     necessary.  Value '0' of LEVEL de-activates this option.  Value '1'
     tracks tokens locations in a degraded mode for the sake of minimal
     memory overhead.  In this mode all tokens resulting from the
     expansion of an argument of a function-like macro have the same
     location.  Value '2' tracks tokens locations completely.  This
     value is the most memory hungry.  When this option is given no
     argument, the default parameter value is '2'.

     Note that '-ftrack-macro-expansion=2' is activated by default.

'-fmacro-prefix-map=OLD=NEW'
     When preprocessing files residing in directory 'OLD', expand the
     '__FILE__' and '__BASE_FILE__' macros as if the files resided in
     directory 'NEW' instead.  This can be used to change an absolute
     path to a relative path by using '.' for NEW which can result in
     more reproducible builds that are location independent.  This
     option also affects '__builtin_FILE()' during compilation.  See
     also '-ffile-prefix-map'.

'-fexec-charset=CHARSET'
     Set the execution character set, used for string and character
     constants.  The default is UTF-8.  CHARSET can be any encoding
     supported by the system's 'iconv' library routine.

'-fwide-exec-charset=CHARSET'
     Set the wide execution character set, used for wide string and
     character constants.  The default is UTF-32 or UTF-16, whichever
     corresponds to the width of 'wchar_t'.  As with '-fexec-charset',
     CHARSET can be any encoding supported by the system's 'iconv'
     library routine; however, you will have problems with encodings
     that do not fit exactly in 'wchar_t'.

'-finput-charset=CHARSET'
     Set the input character set, used for translation from the
     character set of the input file to the source character set used by
     GCC.  If the locale does not specify, or GCC cannot get this
     information from the locale, the default is UTF-8.  This can be
     overridden by either the locale or this command-line option.
     Currently the command-line option takes precedence if there's a
     conflict.  CHARSET can be any encoding supported by the system's
     'iconv' library routine.

'-fworking-directory'
     Enable generation of linemarkers in the preprocessor output that
     let the compiler know the current working directory at the time of
     preprocessing.  When this option is enabled, the preprocessor
     emits, after the initial linemarker, a second linemarker with the
     current working directory followed by two slashes.  GCC uses this
     directory, when it's present in the preprocessed input, as the
     directory emitted as the current working directory in some
     debugging information formats.  This option is implicitly enabled
     if debugging information is enabled, but this can be inhibited with
     the negated form '-fno-working-directory'.  If the '-P' flag is
     present in the command line, this option has no effect, since no
     '#line' directives are emitted whatsoever.

'-A PREDICATE=ANSWER'
     Make an assertion with the predicate PREDICATE and answer ANSWER.
     This form is preferred to the older form '-A PREDICATE(ANSWER)',
     which is still supported, because it does not use shell special
     characters.  *Note Obsolete Features::.

'-A -PREDICATE=ANSWER'
     Cancel an assertion with the predicate PREDICATE and answer ANSWER.

'-C'
     Do not discard comments.  All comments are passed through to the
     output file, except for comments in processed directives, which are
     deleted along with the directive.

     You should be prepared for side effects when using '-C'; it causes
     the preprocessor to treat comments as tokens in their own right.
     For example, comments appearing at the start of what would be a
     directive line have the effect of turning that line into an
     ordinary source line, since the first token on the line is no
     longer a '#'.

'-CC'
     Do not discard comments, including during macro expansion.  This is
     like '-C', except that comments contained within macros are also
     passed through to the output file where the macro is expanded.

     In addition to the side effects of the '-C' option, the '-CC'
     option causes all C++-style comments inside a macro to be converted
     to C-style comments.  This is to prevent later use of that macro
     from inadvertently commenting out the remainder of the source line.

     The '-CC' option is generally used to support lint comments.

'-P'
     Inhibit generation of linemarkers in the output from the
     preprocessor.  This might be useful when running the preprocessor
     on something that is not C code, and will be sent to a program
     which might be confused by the linemarkers.  *Note Preprocessor
     Output::.

'-traditional'
'-traditional-cpp'

     Try to imitate the behavior of pre-standard C preprocessors, as
     opposed to ISO C preprocessors.  *Note Traditional Mode::.

     Note that GCC does not otherwise attempt to emulate a pre-standard
     C compiler, and these options are only supported with the '-E'
     switch, or when invoking CPP explicitly.

'-trigraphs'
     Support ISO C trigraphs.  These are three-character sequences, all
     starting with '??', that are defined by ISO C to stand for single
     characters.  For example, '??/' stands for '\', so ''??/n'' is a
     character constant for a newline.  *Note Initial processing::.

     By default, GCC ignores trigraphs, but in standard-conforming modes
     it converts them.  See the '-std' and '-ansi' options.

'-remap'
     Enable special code to work around file systems which only permit
     very short file names, such as MS-DOS.

'-H'
     Print the name of each header file used, in addition to other
     normal activities.  Each name is indented to show how deep in the
     '#include' stack it is.  Precompiled header files are also printed,
     even if they are found to be invalid; an invalid precompiled header
     file is printed with '...x' and a valid one with '...!' .

'-dLETTERS'
     Says to make debugging dumps during compilation as specified by
     LETTERS.  The flags documented here are those relevant to the
     preprocessor.  Other LETTERS are interpreted by the compiler
     proper, or reserved for future versions of GCC, and so are silently
     ignored.  If you specify LETTERS whose behavior conflicts, the
     result is undefined.

     '-dM'
          Instead of the normal output, generate a list of '#define'
          directives for all the macros defined during the execution of
          the preprocessor, including predefined macros.  This gives you
          a way of finding out what is predefined in your version of the
          preprocessor.  Assuming you have no file 'foo.h', the command

               touch foo.h; cpp -dM foo.h

          shows all the predefined macros.

     '-dD'
          Like '-dM' except in two respects: it does _not_ include the
          predefined macros, and it outputs _both_ the '#define'
          directives and the result of preprocessing.  Both kinds of
          output go to the standard output file.

     '-dN'
          Like '-dD', but emit only the macro names, not their
          expansions.

     '-dI'
          Output '#include' directives in addition to the result of
          preprocessing.

     '-dU'
          Like '-dD' except that only macros that are expanded, or whose
          definedness is tested in preprocessor directives, are output;
          the output is delayed until the use or test of the macro; and
          '#undef' directives are also output for macros tested but
          undefined at the time.

'-fdebug-cpp'
     This option is only useful for debugging GCC. When used from CPP or
     with '-E', it dumps debugging information about location maps.
     Every token in the output is preceded by the dump of the map its
     location belongs to.

     When used from GCC without '-E', this option has no effect.

'-I DIR'
'-iquote DIR'
'-isystem DIR'
'-idirafter DIR'
     Add the directory DIR to the list of directories to be searched for
     header files during preprocessing.  *Note Search Path::.  If DIR
     begins with '=' or '$SYSROOT', then the '=' or '$SYSROOT' is
     replaced by the sysroot prefix; see '--sysroot' and '-isysroot'.

     Directories specified with '-iquote' apply only to the quote form
     of the directive, '#include "FILE"'.  Directories specified with
     '-I', '-isystem', or '-idirafter' apply to lookup for both the
     '#include "FILE"' and '#include <FILE>' directives.

     You can specify any number or combination of these options on the
     command line to search for header files in several directories.
     The lookup order is as follows:

       1. For the quote form of the include directive, the directory of
          the current file is searched first.

       2. For the quote form of the include directive, the directories
          specified by '-iquote' options are searched in left-to-right
          order, as they appear on the command line.

       3. Directories specified with '-I' options are scanned in
          left-to-right order.

       4. Directories specified with '-isystem' options are scanned in
          left-to-right order.

       5. Standard system directories are scanned.

       6. Directories specified with '-idirafter' options are scanned in
          left-to-right order.

     You can use '-I' to override a system header file, substituting
     your own version, since these directories are searched before the
     standard system header file directories.  However, you should not
     use this option to add directories that contain vendor-supplied
     system header files; use '-isystem' for that.

     The '-isystem' and '-idirafter' options also mark the directory as
     a system directory, so that it gets the same special treatment that
     is applied to the standard system directories.  *Note System
     Headers::.

     If a standard system include directory, or a directory specified
     with '-isystem', is also specified with '-I', the '-I' option is
     ignored.  The directory is still searched but as a system directory
     at its normal position in the system include chain.  This is to
     ensure that GCC's procedure to fix buggy system headers and the
     ordering for the '#include_next' directive are not inadvertently
     changed.  If you really need to change the search order for system
     directories, use the '-nostdinc' and/or '-isystem' options.  *Note
     System Headers::.

'-I-'
     Split the include path.  This option has been deprecated.  Please
     use '-iquote' instead for '-I' directories before the '-I-' and
     remove the '-I-' option.

     Any directories specified with '-I' options before '-I-' are
     searched only for headers requested with '#include "FILE"'; they
     are not searched for '#include <FILE>'.  If additional directories
     are specified with '-I' options after the '-I-', those directories
     are searched for all '#include' directives.

     In addition, '-I-' inhibits the use of the directory of the current
     file directory as the first search directory for '#include "FILE"'.
     There is no way to override this effect of '-I-'.  *Note Search
     Path::.

'-iprefix PREFIX'
     Specify PREFIX as the prefix for subsequent '-iwithprefix' options.
     If the prefix represents a directory, you should include the final
     '/'.

'-iwithprefix DIR'
'-iwithprefixbefore DIR'
     Append DIR to the prefix specified previously with '-iprefix', and
     add the resulting directory to the include search path.
     '-iwithprefixbefore' puts it in the same place '-I' would;
     '-iwithprefix' puts it where '-idirafter' would.

'-isysroot DIR'
     This option is like the '--sysroot' option, but applies only to
     header files (except for Darwin targets, where it applies to both
     header files and libraries).  See the '--sysroot' option for more
     information.

'-imultilib DIR'
     Use DIR as a subdirectory of the directory containing
     target-specific C++ headers.

'-nostdinc'
     Do not search the standard system directories for header files.
     Only the directories explicitly specified with '-I', '-iquote',
     '-isystem', and/or '-idirafter' options (and the directory of the
     current file, if appropriate) are searched.

'-nostdinc++'
     Do not search for header files in the C++-specific standard
     directories, but do still search the other standard directories.
     (This option is used when building the C++ library.)

'-Wcomment'
'-Wcomments'
     Warn whenever a comment-start sequence '/*' appears in a '/*'
     comment, or whenever a backslash-newline appears in a '//' comment.
     This warning is enabled by '-Wall'.

'-Wtrigraphs'
     Warn if any trigraphs are encountered that might change the meaning
     of the program.  Trigraphs within comments are not warned about,
     except those that would form escaped newlines.

     This option is implied by '-Wall'.  If '-Wall' is not given, this
     option is still enabled unless trigraphs are enabled.  To get
     trigraph conversion without warnings, but get the other '-Wall'
     warnings, use '-trigraphs -Wall -Wno-trigraphs'.

'-Wundef'
     Warn if an undefined identifier is evaluated in an '#if' directive.
     Such identifiers are replaced with zero.

'-Wexpansion-to-defined'
     Warn whenever 'defined' is encountered in the expansion of a macro
     (including the case where the macro is expanded by an '#if'
     directive).  Such usage is not portable.  This warning is also
     enabled by '-Wpedantic' and '-Wextra'.

'-Wunused-macros'
     Warn about macros defined in the main file that are unused.  A
     macro is "used" if it is expanded or tested for existence at least
     once.  The preprocessor also warns if the macro has not been used
     at the time it is redefined or undefined.

     Built-in macros, macros defined on the command line, and macros
     defined in include files are not warned about.

     _Note:_ If a macro is actually used, but only used in skipped
     conditional blocks, then the preprocessor reports it as unused.  To
     avoid the warning in such a case, you might improve the scope of
     the macro's definition by, for example, moving it into the first
     skipped block.  Alternatively, you could provide a dummy use with
     something like:

          #if defined the_macro_causing_the_warning
          #endif

'-Wno-endif-labels'
     Do not warn whenever an '#else' or an '#endif' are followed by
     text.  This sometimes happens in older programs with code of the
     form

          #if FOO
          ...
          #else FOO
          ...
          #endif FOO

     The second and third 'FOO' should be in comments.  This warning is
     on by default.


File: cpp.info,  Node: Environment Variables,  Next: GNU Free Documentation License,  Prev: Invocation,  Up: Top

13 Environment Variables
************************

This section describes the environment variables that affect how CPP
operates.  You can use them to specify directories or prefixes to use
when searching for include files, or to control dependency output.

   Note that you can also specify places to search using options such as
'-I', and control dependency output with options like '-M' (*note
Invocation::).  These take precedence over environment variables, which
in turn take precedence over the configuration of GCC.

'CPATH'
'C_INCLUDE_PATH'
'CPLUS_INCLUDE_PATH'
'OBJC_INCLUDE_PATH'
     Each variable's value is a list of directories separated by a
     special character, much like 'PATH', in which to look for header
     files.  The special character, 'PATH_SEPARATOR', is
     target-dependent and determined at GCC build time.  For Microsoft
     Windows-based targets it is a semicolon, and for almost all other
     targets it is a colon.

     'CPATH' specifies a list of directories to be searched as if
     specified with '-I', but after any paths given with '-I' options on
     the command line.  This environment variable is used regardless of
     which language is being preprocessed.

     The remaining environment variables apply only when preprocessing
     the particular language indicated.  Each specifies a list of
     directories to be searched as if specified with '-isystem', but
     after any paths given with '-isystem' options on the command line.

     In all these variables, an empty element instructs the compiler to
     search its current working directory.  Empty elements can appear at
     the beginning or end of a path.  For instance, if the value of
     'CPATH' is ':/special/include', that has the same effect as
     '-I. -I/special/include'.

     See also *note Search Path::.

'DEPENDENCIES_OUTPUT'
     If this variable is set, its value specifies how to output
     dependencies for Make based on the non-system header files
     processed by the compiler.  System header files are ignored in the
     dependency output.

     The value of 'DEPENDENCIES_OUTPUT' can be just a file name, in
     which case the Make rules are written to that file, guessing the
     target name from the source file name.  Or the value can have the
     form 'FILE TARGET', in which case the rules are written to file
     FILE using TARGET as the target name.

     In other words, this environment variable is equivalent to
     combining the options '-MM' and '-MF' (*note Invocation::), with an
     optional '-MT' switch too.

'SUNPRO_DEPENDENCIES'
     This variable is the same as 'DEPENDENCIES_OUTPUT' (see above),
     except that system header files are not ignored, so it implies '-M'
     rather than '-MM'.  However, the dependence on the main input file
     is omitted.  *Note Invocation::.

'SOURCE_DATE_EPOCH'
     If this variable is set, its value specifies a UNIX timestamp to be
     used in replacement of the current date and time in the '__DATE__'
     and '__TIME__' macros, so that the embedded timestamps become
     reproducible.

     The value of 'SOURCE_DATE_EPOCH' must be a UNIX timestamp, defined
     as the number of seconds (excluding leap seconds) since 01 Jan 1970
     00:00:00 represented in ASCII; identical to the output of ''date
     +%s'' on GNU/Linux and other systems that support the '%s'
     extension in the 'date' command.

     The value should be a known timestamp such as the last modification
     time of the source or package and it should be set by the build
     process.


File: cpp.info,  Node: GNU Free Documentation License,  Next: Index of Directives,  Prev: Environment Variables,  Up: Top

GNU Free Documentation License
******************************

                     Version 1.3, 3 November 2008

     Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
     <http://fsf.org/>

     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

  0. PREAMBLE

     The purpose of this License is to make a manual, textbook, or other
     functional and useful document "free" in the sense of freedom: to
     assure everyone the effective freedom to copy and redistribute it,
     with or without modifying it, either commercially or
     noncommercially.  Secondarily, this License preserves for the
     author and publisher a way to get credit for their work, while not
     being considered responsible for modifications made by others.

     This License is a kind of "copyleft", which means that derivative
     works of the document must themselves be free in the same sense.
     It complements the GNU General Public License, which is a copyleft
     license designed for free software.

     We have designed this License in order to use it for manuals for
     free software, because free software needs free documentation: a
     free program should come with manuals providing the same freedoms
     that the software does.  But this License is not limited to
     software manuals; it can be used for any textual work, regardless
     of subject matter or whether it is published as a printed book.  We
     recommend this License principally for works whose purpose is
     instruction or reference.

  1. APPLICABILITY AND DEFINITIONS

     This License applies to any manual or other work, in any medium,
     that contains a notice placed by the copyright holder saying it can
     be distributed under the terms of this License.  Such a notice
     grants a world-wide, royalty-free license, unlimited in duration,
     to use that work under the conditions stated herein.  The
     "Document", below, refers to any such manual or work.  Any member
     of the public is a licensee, and is addressed as "you".  You accept
     the license if you copy, modify or distribute the work in a way
     requiring permission under copyright law.

     A "Modified Version" of the Document means any work containing the
     Document or a portion of it, either copied verbatim, or with
     modifications and/or translated into another language.

     A "Secondary Section" is a named appendix or a front-matter section
     of the Document that deals exclusively with the relationship of the
     publishers or authors of the Document to the Document's overall
     subject (or to related matters) and contains nothing that could
     fall directly within that overall subject.  (Thus, if the Document
     is in part a textbook of mathematics, a Secondary Section may not
     explain any mathematics.)  The relationship could be a matter of
     historical connection with the subject or with related matters, or
     of legal, commercial, philosophical, ethical or political position
     regarding them.

     The "Invariant Sections" are certain Secondary Sections whose
     titles are designated, as being those of Invariant Sections, in the
     notice that says that the Document is released under this License.
     If a section does not fit the above definition of Secondary then it
     is not allowed to be designated as Invariant.  The Document may
     contain zero Invariant Sections.  If the Document does not identify
     any Invariant Sections then there are none.

     The "Cover Texts" are certain short passages of text that are
     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
     that says that the Document is released under this License.  A
     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
     be at most 25 words.

     A "Transparent" copy of the Document means a machine-readable copy,
     represented in a format whose specification is available to the
     general public, that is suitable for revising the document
     straightforwardly with generic text editors or (for images composed
     of pixels) generic paint programs or (for drawings) some widely
     available drawing editor, and that is suitable for input to text
     formatters or for automatic translation to a variety of formats
     suitable for input to text formatters.  A copy made in an otherwise
     Transparent file format whose markup, or absence of markup, has
     been arranged to thwart or discourage subsequent modification by
     readers is not Transparent.  An image format is not Transparent if
     used for any substantial amount of text.  A copy that is not
     "Transparent" is called "Opaque".

     Examples of suitable formats for Transparent copies include plain
     ASCII without markup, Texinfo input format, LaTeX input format,
     SGML or XML using a publicly available DTD, and standard-conforming
     simple HTML, PostScript or PDF designed for human modification.
     Examples of transparent image formats include PNG, XCF and JPG.
     Opaque formats include proprietary formats that can be read and
     edited only by proprietary word processors, SGML or XML for which
     the DTD and/or processing tools are not generally available, and
     the machine-generated HTML, PostScript or PDF produced by some word
     processors for output purposes only.

     The "Title Page" means, for a printed book, the title page itself,
     plus such following pages as are needed to hold, legibly, the
     material this License requires to appear in the title page.  For
     works in formats which do not have any title page as such, "Title
     Page" means the text near the most prominent appearance of the
     work's title, preceding the beginning of the body of the text.

     The "publisher" means any person or entity that distributes copies
     of the Document to the public.

     A section "Entitled XYZ" means a named subunit of the Document
     whose title either is precisely XYZ or contains XYZ in parentheses
     following text that translates XYZ in another language.  (Here XYZ
     stands for a specific section name mentioned below, such as
     "Acknowledgements", "Dedications", "Endorsements", or "History".)
     To "Preserve the Title" of such a section when you modify the
     Document means that it remains a section "Entitled XYZ" according
     to this definition.

     The Document may include Warranty Disclaimers next to the notice
     which states that this License applies to the Document.  These
     Warranty Disclaimers are considered to be included by reference in
     this License, but only as regards disclaiming warranties: any other
     implication that these Warranty Disclaimers may have is void and
     has no effect on the meaning of this License.

  2. VERBATIM COPYING

     You may copy and distribute the Document in any medium, either
     commercially or noncommercially, provided that this License, the
     copyright notices, and the license notice saying this License
     applies to the Document are reproduced in all copies, and that you
     add no other conditions whatsoever to those of this License.  You
     may not use technical measures to obstruct or control the reading
     or further copying of the copies you make or distribute.  However,
     you may accept compensation in exchange for copies.  If you
     distribute a large enough number of copies you must also follow the
     conditions in section 3.

     You may also lend copies, under the same conditions stated above,
     and you may publicly display copies.

  3. COPYING IN QUANTITY

     If you publish printed copies (or copies in media that commonly
     have printed covers) of the Document, numbering more than 100, and
     the Document's license notice requires Cover Texts, you must
     enclose the copies in covers that carry, clearly and legibly, all
     these Cover Texts: Front-Cover Texts on the front cover, and
     Back-Cover Texts on the back cover.  Both covers must also clearly
     and legibly identify you as the publisher of these copies.  The
     front cover must present the full title with all words of the title
     equally prominent and visible.  You may add other material on the
     covers in addition.  Copying with changes limited to the covers, as
     long as they preserve the title of the Document and satisfy these
     conditions, can be treated as verbatim copying in other respects.

     If the required texts for either cover are too voluminous to fit
     legibly, you should put the first ones listed (as many as fit
     reasonably) on the actual cover, and continue the rest onto
     adjacent pages.

     If you publish or distribute Opaque copies of the Document
     numbering more than 100, you must either include a machine-readable
     Transparent copy along with each Opaque copy, or state in or with
     each Opaque copy a computer-network location from which the general
     network-using public has access to download using public-standard
     network protocols a complete Transparent copy of the Document, free
     of added material.  If you use the latter option, you must take
     reasonably prudent steps, when you begin distribution of Opaque
     copies in quantity, to ensure that this Transparent copy will
     remain thus accessible at the stated location until at least one
     year after the last time you distribute an Opaque copy (directly or
     through your agents or retailers) of that edition to the public.

     It is requested, but not required, that you contact the authors of
     the Document well before redistributing any large number of copies,
     to give them a chance to provide you with an updated version of the
     Document.

  4. MODIFICATIONS

     You may copy and distribute a Modified Version of the Document
     under the conditions of sections 2 and 3 above, provided that you
     release the Modified Version under precisely this License, with the
     Modified Version filling the role of the Document, thus licensing
     distribution and modification of the Modified Version to whoever
     possesses a copy of it.  In addition, you must do these things in
     the Modified Version:

       A. Use in the Title Page (and on the covers, if any) a title
          distinct from that of the Document, and from those of previous
          versions (which should, if there were any, be listed in the
          History section of the Document).  You may use the same title
          as a previous version if the original publisher of that
          version gives permission.

       B. List on the Title Page, as authors, one or more persons or
          entities responsible for authorship of the modifications in
          the Modified Version, together with at least five of the
          principal authors of the Document (all of its principal
          authors, if it has fewer than five), unless they release you
          from this requirement.

       C. State on the Title page the name of the publisher of the
          Modified Version, as the publisher.

       D. Preserve all the copyright notices of the Document.

       E. Add an appropriate copyright notice for your modifications
          adjacent to the other copyright notices.

       F. Include, immediately after the copyright notices, a license
          notice giving the public permission to use the Modified
          Version under the terms of this License, in the form shown in
          the Addendum below.

       G. Preserve in that license notice the full lists of Invariant
          Sections and required Cover Texts given in the Document's
          license notice.

       H. Include an unaltered copy of this License.

       I. Preserve the section Entitled "History", Preserve its Title,
          and add to it an item stating at least the title, year, new
          authors, and publisher of the Modified Version as given on the
          Title Page.  If there is no section Entitled "History" in the
          Document, create one stating the title, year, authors, and
          publisher of the Document as given on its Title Page, then add
          an item describing the Modified Version as stated in the
          previous sentence.

       J. Preserve the network location, if any, given in the Document
          for public access to a Transparent copy of the Document, and
          likewise the network locations given in the Document for
          previous versions it was based on.  These may be placed in the
          "History" section.  You may omit a network location for a work
          that was published at least four years before the Document
          itself, or if the original publisher of the version it refers
          to gives permission.

       K. For any section Entitled "Acknowledgements" or "Dedications",
          Preserve the Title of the section, and preserve in the section
          all the substance and tone of each of the contributor
          acknowledgements and/or dedications given therein.

       L. Preserve all the Invariant Sections of the Document, unaltered
          in their text and in their titles.  Section numbers or the
          equivalent are not considered part of the section titles.

       M. Delete any section Entitled "Endorsements".  Such a section
          may not be included in the Modified Version.

       N. Do not retitle any existing section to be Entitled
          "Endorsements" or to conflict in title with any Invariant
          Section.

       O. Preserve any Warranty Disclaimers.

     If the Modified Version includes new front-matter sections or
     appendices that qualify as Secondary Sections and contain no
     material copied from the Document, you may at your option designate
     some or all of these sections as invariant.  To do this, add their
     titles to the list of Invariant Sections in the Modified Version's
     license notice.  These titles must be distinct from any other
     section titles.

     You may add a section Entitled "Endorsements", provided it contains
     nothing but endorsements of your Modified Version by various
     parties--for example, statements of peer review or that the text
     has been approved by an organization as the authoritative
     definition of a standard.

     You may add a passage of up to five words as a Front-Cover Text,
     and a passage of up to 25 words as a Back-Cover Text, to the end of
     the list of Cover Texts in the Modified Version.  Only one passage
     of Front-Cover Text and one of Back-Cover Text may be added by (or
     through arrangements made by) any one entity.  If the Document
     already includes a cover text for the same cover, previously added
     by you or by arrangement made by the same entity you are acting on
     behalf of, you may not add another; but you may replace the old
     one, on explicit permission from the previous publisher that added
     the old one.

     The author(s) and publisher(s) of the Document do not by this
     License give permission to use their names for publicity for or to
     assert or imply endorsement of any Modified Version.

  5. COMBINING DOCUMENTS

     You may combine the Document with other documents released under
     this License, under the terms defined in section 4 above for
     modified versions, provided that you include in the combination all
     of the Invariant Sections of all of the original documents,
     unmodified, and list them all as Invariant Sections of your
     combined work in its license notice, and that you preserve all
     their Warranty Disclaimers.

     The combined work need only contain one copy of this License, and
     multiple identical Invariant Sections may be replaced with a single
     copy.  If there are multiple Invariant Sections with the same name
     but different contents, make the title of each such section unique
     by adding at the end of it, in parentheses, the name of the
     original author or publisher of that section if known, or else a
     unique number.  Make the same adjustment to the section titles in
     the list of Invariant Sections in the license notice of the
     combined work.

     In the combination, you must combine any sections Entitled
     "History" in the various original documents, forming one section
     Entitled "History"; likewise combine any sections Entitled
     "Acknowledgements", and any sections Entitled "Dedications".  You
     must delete all sections Entitled "Endorsements."

  6. COLLECTIONS OF DOCUMENTS

     You may make a collection consisting of the Document and other
     documents released under this License, and replace the individual
     copies of this License in the various documents with a single copy
     that is included in the collection, provided that you follow the
     rules of this License for verbatim copying of each of the documents
     in all other respects.

     You may extract a single document from such a collection, and
     distribute it individually under this License, provided you insert
     a copy of this License into the extracted document, and follow this
     License in all other respects regarding verbatim copying of that
     document.

  7. AGGREGATION WITH INDEPENDENT WORKS

     A compilation of the Document or its derivatives with other
     separate and independent documents or works, in or on a volume of a
     storage or distribution medium, is called an "aggregate" if the
     copyright resulting from the compilation is not used to limit the
     legal rights of the compilation's users beyond what the individual
     works permit.  When the Document is included in an aggregate, this
     License does not apply to the other works in the aggregate which
     are not themselves derivative works of the Document.

     If the Cover Text requirement of section 3 is applicable to these
     copies of the Document, then if the Document is less than one half
     of the entire aggregate, the Document's Cover Texts may be placed
     on covers that bracket the Document within the aggregate, or the
     electronic equivalent of covers if the Document is in electronic
     form.  Otherwise they must appear on printed covers that bracket
     the whole aggregate.

  8. TRANSLATION

     Translation is considered a kind of modification, so you may
     distribute translations of the Document under the terms of section
     4.  Replacing Invariant Sections with translations requires special
     permission from their copyright holders, but you may include
     translations of some or all Invariant Sections in addition to the
     original versions of these Invariant Sections.  You may include a
     translation of this License, and all the license notices in the
     Document, and any Warranty Disclaimers, provided that you also
     include the original English version of this License and the
     original versions of those notices and disclaimers.  In case of a
     disagreement between the translation and the original version of
     this License or a notice or disclaimer, the original version will
     prevail.

     If a section in the Document is Entitled "Acknowledgements",
     "Dedications", or "History", the requirement (section 4) to
     Preserve its Title (section 1) will typically require changing the
     actual title.

  9. TERMINATION

     You may not copy, modify, sublicense, or distribute the Document
     except as expressly provided under this License.  Any attempt
     otherwise to copy, modify, sublicense, or distribute it is void,
     and will automatically terminate your rights under this License.

     However, if you cease all violation of this License, then your
     license from a particular copyright holder is reinstated (a)
     provisionally, unless and until the copyright holder explicitly and
     finally terminates your license, and (b) permanently, if the
     copyright holder fails to notify you of the violation by some
     reasonable means prior to 60 days after the cessation.

     Moreover, your license from a particular copyright holder is
     reinstated permanently if the copyright holder notifies you of the
     violation by some reasonable means, this is the first time you have
     received notice of violation of this License (for any work) from
     that copyright holder, and you cure the violation prior to 30 days
     after your receipt of the notice.

     Termination of your rights under this section does not terminate
     the licenses of parties who have received copies or rights from you
     under this License.  If your rights have been terminated and not
     permanently reinstated, receipt of a copy of some or all of the
     same material does not give you any rights to use it.

  10. FUTURE REVISIONS OF THIS LICENSE

     The Free Software Foundation may publish new, revised versions of
     the GNU Free Documentation License from time to time.  Such new
     versions will be similar in spirit to the present version, but may
     differ in detail to address new problems or concerns.  See
     <http://www.gnu.org/copyleft/>.

     Each version of the License is given a distinguishing version
     number.  If the Document specifies that a particular numbered
     version of this License "or any later version" applies to it, you
     have the option of following the terms and conditions either of
     that specified version or of any later version that has been
     published (not as a draft) by the Free Software Foundation.  If the
     Document does not specify a version number of this License, you may
     choose any version ever published (not as a draft) by the Free
     Software Foundation.  If the Document specifies that a proxy can
     decide which future versions of this License can be used, that
     proxy's public statement of acceptance of a version permanently
     authorizes you to choose that version for the Document.

  11. RELICENSING

     "Massive Multiauthor Collaboration Site" (or "MMC Site") means any
     World Wide Web server that publishes copyrightable works and also
     provides prominent facilities for anybody to edit those works.  A
     public wiki that anybody can edit is an example of such a server.
     A "Massive Multiauthor Collaboration" (or "MMC") contained in the
     site means any set of copyrightable works thus published on the MMC
     site.

     "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
     license published by Creative Commons Corporation, a not-for-profit
     corporation with a principal place of business in San Francisco,
     California, as well as future copyleft versions of that license
     published by that same organization.

     "Incorporate" means to publish or republish a Document, in whole or
     in part, as part of another Document.

     An MMC is "eligible for relicensing" if it is licensed under this
     License, and if all works that were first published under this
     License somewhere other than this MMC, and subsequently
     incorporated in whole or in part into the MMC, (1) had no cover
     texts or invariant sections, and (2) were thus incorporated prior
     to November 1, 2008.

     The operator of an MMC Site may republish an MMC contained in the
     site under CC-BY-SA on the same site at any time before August 1,
     2009, provided the MMC is eligible for relicensing.

ADDENDUM: How to use this License for your documents
====================================================

To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:

       Copyright (C)  YEAR  YOUR NAME.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.3
       or any later version published by the Free Software Foundation;
       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
       Texts.  A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

   If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the "with...Texts."  line with this:

         with the Invariant Sections being LIST THEIR TITLES, with
         the Front-Cover Texts being LIST, and with the Back-Cover Texts
         being LIST.

   If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.

   If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of free
software license, such as the GNU General Public License, to permit
their use in free software.


File: cpp.info,  Node: Index of Directives,  Next: Option Index,  Prev: GNU Free Documentation License,  Up: Top

Index of Directives
*******************

�[index�]
* Menu:

* #assert:                               Obsolete Features.    (line 48)
* #define:                               Object-like Macros.   (line 11)
* #elif:                                 Elif.                 (line  6)
* #else:                                 Else.                 (line  6)
* #endif:                                Ifdef.                (line  6)
* #error:                                Diagnostics.          (line  6)
* #ident:                                Other Directives.     (line  6)
* #if:                                   Conditional Syntax.   (line  6)
* #ifdef:                                Ifdef.                (line  6)
* #ifndef:                               Ifdef.                (line 40)
* #import:                               Alternatives to Wrapper #ifndef.
                                                               (line 11)
* #include:                              Include Syntax.       (line  6)
* #include_next:                         Wrapper Headers.      (line  6)
* #line:                                 Line Control.         (line 20)
* #pragma GCC dependency:                Pragmas.              (line 43)
* #pragma GCC error:                     Pragmas.              (line 88)
* #pragma GCC poison:                    Pragmas.              (line 55)
* #pragma GCC system_header:             System Headers.       (line 25)
* #pragma GCC system_header <1>:         Pragmas.              (line 82)
* #pragma GCC warning:                   Pragmas.              (line 87)
* #pragma once:                          Pragmas.              (line 96)
* #sccs:                                 Other Directives.     (line  6)
* #unassert:                             Obsolete Features.    (line 59)
* #undef:                                Undefining and Redefining Macros.
                                                               (line  6)
* #warning:                              Diagnostics.          (line 27)


File: cpp.info,  Node: Option Index,  Next: Concept Index,  Prev: Index of Directives,  Up: Top

Option Index
************

CPP's command-line options and environment variables are indexed here
without any initial '-' or '--'.

�[index�]
* Menu:

* A:                                     Invocation.          (line 329)
* C:                                     Invocation.          (line 338)
* CC:                                    Invocation.          (line 350)
* CPATH:                                 Environment Variables.
                                                              (line  15)
* CPLUS_INCLUDE_PATH:                    Environment Variables.
                                                              (line  17)
* C_INCLUDE_PATH:                        Environment Variables.
                                                              (line  16)
* D:                                     Invocation.          (line  44)
* d:                                     Invocation.          (line 399)
* dD:                                    Invocation.          (line 418)
* DEPENDENCIES_OUTPUT:                   Environment Variables.
                                                              (line  45)
* dI:                                    Invocation.          (line 428)
* dM:                                    Invocation.          (line 407)
* dN:                                    Invocation.          (line 424)
* dU:                                    Invocation.          (line 432)
* fdebug-cpp:                            Invocation.          (line 439)
* fdirectives-only:                      Invocation.          (line 228)
* fdollars-in-identifiers:               Invocation.          (line 249)
* fexec-charset:                         Invocation.          (line 292)
* fextended-identifiers:                 Invocation.          (line 252)
* finput-charset:                        Invocation.          (line 305)
* fmacro-prefix-map:                     Invocation.          (line 283)
* fno-canonical-system-headers:          Invocation.          (line 256)
* fno-working-directory:                 Invocation.          (line 315)
* fpreprocessed:                         Invocation.          (line 215)
* ftabstop:                              Invocation.          (line 260)
* ftrack-macro-expansion:                Invocation.          (line 266)
* fwide-exec-charset:                    Invocation.          (line 297)
* fworking-directory:                    Invocation.          (line 315)
* H:                                     Invocation.          (line 392)
* I:                                     Invocation.          (line 450)
* I-:                                    Invocation.          (line 504)
* idirafter:                             Invocation.          (line 450)
* imacros:                               Invocation.          (line  82)
* imultilib:                             Invocation.          (line 538)
* include:                               Invocation.          (line  71)
* iprefix:                               Invocation.          (line 520)
* iquote:                                Invocation.          (line 450)
* isysroot:                              Invocation.          (line 532)
* isystem:                               Invocation.          (line 450)
* iwithprefix:                           Invocation.          (line 526)
* iwithprefixbefore:                     Invocation.          (line 526)
* M:                                     Invocation.          (line 103)
* MD:                                    Invocation.          (line 195)
* MF:                                    Invocation.          (line 137)
* MG:                                    Invocation.          (line 148)
* MM:                                    Invocation.          (line 128)
* MMD:                                   Invocation.          (line 211)
* MP:                                    Invocation.          (line 158)
* MQ:                                    Invocation.          (line 185)
* MT:                                    Invocation.          (line 170)
* nostdinc:                              Invocation.          (line 542)
* nostdinc++:                            Invocation.          (line 548)
* OBJC_INCLUDE_PATH:                     Environment Variables.
                                                              (line  18)
* P:                                     Invocation.          (line 362)
* pthread:                               Invocation.          (line  96)
* remap:                                 Invocation.          (line 388)
* SOURCE_DATE_EPOCH:                     Environment Variables.
                                                              (line  67)
* SUNPRO_DEPENDENCIES:                   Environment Variables.
                                                              (line  61)
* traditional:                           Invocation.          (line 370)
* traditional-cpp:                       Invocation.          (line 370)
* trigraphs:                             Invocation.          (line 379)
* U:                                     Invocation.          (line  67)
* undef:                                 Invocation.          (line  91)
* Wcomment:                              Invocation.          (line 554)
* Wcomments:                             Invocation.          (line 554)
* Wendif-labels:                         Invocation.          (line 598)
* Wexpansion-to-defined:                 Invocation.          (line 573)
* Wno-endif-labels:                      Invocation.          (line 598)
* Wno-undef:                             Invocation.          (line 569)
* Wtrigraphs:                            Invocation.          (line 559)
* Wundef:                                Invocation.          (line 569)
* Wunused-macros:                        Invocation.          (line 579)


File: cpp.info,  Node: Concept Index,  Prev: Option Index,  Up: Top

Concept Index
*************

�[index�]
* Menu:

* # operator:                            Stringizing.         (line   6)
* ## operator:                           Concatenation.       (line   6)
* _Pragma:                               Pragmas.             (line  13)
* __has_attribute:                       __has_attribute.     (line   6)
* __has_cpp_attribute:                   __has_cpp_attribute. (line   6)
* __has_include:                         __has_include.       (line   6)
* alternative tokens:                    Tokenization.        (line 101)
* arguments:                             Macro Arguments.     (line   6)
* arguments in macro definitions:        Macro Arguments.     (line   6)
* assertions:                            Obsolete Features.   (line  13)
* assertions, canceling:                 Obsolete Features.   (line  59)
* backslash-newline:                     Initial processing.  (line  61)
* block comments:                        Initial processing.  (line  77)
* C language, traditional:               Invocation.          (line 368)
* C++ named operators:                   C++ Named Operators. (line   6)
* character constants:                   Tokenization.        (line  82)
* character set, execution:              Invocation.          (line 292)
* character set, input:                  Invocation.          (line 305)
* character set, wide execution:         Invocation.          (line 297)
* command line:                          Invocation.          (line   6)
* commenting out code:                   Deleted Code.        (line   6)
* comments:                              Initial processing.  (line  77)
* common predefined macros:              Common Predefined Macros.
                                                              (line   6)
* computed includes:                     Computed Includes.   (line   6)
* concatenation:                         Concatenation.       (line   6)
* conditional group:                     Ifdef.               (line  14)
* conditionals:                          Conditionals.        (line   6)
* continued lines:                       Initial processing.  (line  61)
* controlling macro:                     Once-Only Headers.   (line  35)
* defined:                               Defined.             (line   6)
* dependencies for make as output:       Environment Variables.
                                                              (line  46)
* dependencies for make as output <1>:   Environment Variables.
                                                              (line  62)
* dependencies, make:                    Invocation.          (line 103)
* diagnostic:                            Diagnostics.         (line   6)
* digraphs:                              Tokenization.        (line 101)
* directive line:                        The preprocessing language.
                                                              (line   6)
* directive name:                        The preprocessing language.
                                                              (line   6)
* directives:                            The preprocessing language.
                                                              (line   6)
* empty macro arguments:                 Macro Arguments.     (line  66)
* environment variables:                 Environment Variables.
                                                              (line   6)
* expansion of arguments:                Argument Prescan.    (line   6)
* FDL, GNU Free Documentation License:   GNU Free Documentation License.
                                                              (line   6)
* function-like macros:                  Function-like Macros.
                                                              (line   6)
* grouping options:                      Invocation.          (line  38)
* guard macro:                           Once-Only Headers.   (line  35)
* header file:                           Header Files.        (line   6)
* header file names:                     Tokenization.        (line  82)
* identifiers:                           Tokenization.        (line  33)
* implementation limits:                 Implementation limits.
                                                              (line   6)
* implementation-defined behavior:       Implementation-defined behavior.
                                                              (line   6)
* including just once:                   Once-Only Headers.   (line   6)
* invocation:                            Invocation.          (line   6)
* iso646.h:                              C++ Named Operators. (line   6)
* line comments:                         Initial processing.  (line  77)
* line control:                          Line Control.        (line   6)
* line endings:                          Initial processing.  (line  14)
* linemarkers:                           Preprocessor Output. (line  27)
* macro argument expansion:              Argument Prescan.    (line   6)
* macro arguments and directives:        Directives Within Macro Arguments.
                                                              (line   6)
* macros in include:                     Computed Includes.   (line   6)
* macros with arguments:                 Macro Arguments.     (line   6)
* macros with variable arguments:        Variadic Macros.     (line   6)
* make:                                  Invocation.          (line 103)
* manifest constants:                    Object-like Macros.  (line   6)
* named operators:                       C++ Named Operators. (line   6)
* newlines in macro arguments:           Newlines in Arguments.
                                                              (line   6)
* null directive:                        Other Directives.    (line  15)
* numbers:                               Tokenization.        (line  59)
* object-like macro:                     Object-like Macros.  (line   6)
* options:                               Invocation.          (line  43)
* options, grouping:                     Invocation.          (line  38)
* other tokens:                          Tokenization.        (line 115)
* output format:                         Preprocessor Output. (line  12)
* overriding a header file:              Wrapper Headers.     (line   6)
* parentheses in macro bodies:           Operator Precedence Problems.
                                                              (line   6)
* pitfalls of macros:                    Macro Pitfalls.      (line   6)
* pragma directive:                      Pragmas.             (line   6)
* predefined macros:                     Predefined Macros.   (line   6)
* predefined macros, system-specific:    System-specific Predefined Macros.
                                                              (line   6)
* predicates:                            Obsolete Features.   (line  26)
* preprocessing directives:              The preprocessing language.
                                                              (line   6)
* preprocessing numbers:                 Tokenization.        (line  59)
* preprocessing tokens:                  Tokenization.        (line   6)
* prescan of macro arguments:            Argument Prescan.    (line   6)
* problems with macros:                  Macro Pitfalls.      (line   6)
* punctuators:                           Tokenization.        (line 101)
* redefining macros:                     Undefining and Redefining Macros.
                                                              (line   6)
* repeated inclusion:                    Once-Only Headers.   (line   6)
* reporting errors:                      Diagnostics.         (line   6)
* reporting warnings:                    Diagnostics.         (line   6)
* reserved namespace:                    System-specific Predefined Macros.
                                                              (line   6)
* self-reference:                        Self-Referential Macros.
                                                              (line   6)
* semicolons (after macro calls):        Swallowing the Semicolon.
                                                              (line   6)
* side effects (in macro arguments):     Duplication of Side Effects.
                                                              (line   6)
* standard predefined macros.:           Standard Predefined Macros.
                                                              (line   6)
* string constants:                      Tokenization.        (line  82)
* string literals:                       Tokenization.        (line  82)
* stringizing:                           Stringizing.         (line   6)
* symbolic constants:                    Object-like Macros.  (line   6)
* system header files:                   Header Files.        (line  13)
* system header files <1>:               System Headers.      (line   6)
* system-specific predefined macros:     System-specific Predefined Macros.
                                                              (line   6)
* testing predicates:                    Obsolete Features.   (line  37)
* token concatenation:                   Concatenation.       (line   6)
* token pasting:                         Concatenation.       (line   6)
* tokens:                                Tokenization.        (line   6)
* traditional C language:                Invocation.          (line 368)
* trigraphs:                             Initial processing.  (line  32)
* undefining macros:                     Undefining and Redefining Macros.
                                                              (line   6)
* unsafe macros:                         Duplication of Side Effects.
                                                              (line   6)
* variable number of arguments:          Variadic Macros.     (line   6)
* variadic macros:                       Variadic Macros.     (line   6)
* wrapper #ifndef:                       Once-Only Headers.   (line   6)
* wrapper headers:                       Wrapper Headers.     (line   6)



Tag Table:
Node: Top945
Node: Overview3506
Node: Character sets6344
Ref: Character sets-Footnote-18499
Node: Initial processing8680
Ref: trigraphs10239
Node: Tokenization14439
Ref: Tokenization-Footnote-121340
Node: The preprocessing language21451
Node: Header Files24330
Node: Include Syntax26246
Node: Include Operation27883
Node: Search Path29731
Node: Once-Only Headers31953
Node: Alternatives to Wrapper #ifndef33612
Node: Computed Includes35261
Node: Wrapper Headers38419
Node: System Headers40842
Node: Macros42443
Node: Object-like Macros43580
Node: Function-like Macros47170
Node: Macro Arguments48786
Node: Stringizing52925
Node: Concatenation56086
Node: Variadic Macros59183
Node: Predefined Macros64135
Node: Standard Predefined Macros64723
Node: Common Predefined Macros71055
Node: System-specific Predefined Macros92158
Node: C++ Named Operators94181
Node: Undefining and Redefining Macros95145
Node: Directives Within Macro Arguments97243
Node: Macro Pitfalls98184
Node: Misnesting98717
Node: Operator Precedence Problems99829
Node: Swallowing the Semicolon101695
Node: Duplication of Side Effects103718
Node: Self-Referential Macros105901
Node: Argument Prescan108310
Node: Newlines in Arguments112061
Node: Conditionals113012
Node: Conditional Uses114708
Node: Conditional Syntax116066
Node: Ifdef116448
Node: If119605
Node: Defined121909
Node: Else123302
Node: Elif123872
Node: __has_attribute125185
Node: __has_cpp_attribute126719
Node: __has_include127605
Node: Deleted Code129198
Node: Diagnostics130445
Node: Line Control131994
Node: Pragmas134272
Node: Other Directives138669
Node: Preprocessor Output139719
Node: Traditional Mode142872
Node: Traditional lexical analysis144009
Node: Traditional macros146512
Node: Traditional miscellany150309
Node: Traditional warnings151305
Node: Implementation Details153502
Node: Implementation-defined behavior154065
Ref: Identifier characters154815
Node: Implementation limits157682
Node: Obsolete Features160355
Node: Invocation163199
Ref: dashMF169234
Ref: fdollars-in-identifiers173813
Ref: Wtrigraphs187809
Node: Environment Variables189864
Node: GNU Free Documentation License193557
Node: Index of Directives218702
Node: Option Index220855
Node: Concept Index226811

End Tag Table