clean up, update other example config

examples/device/cdc_dual_ports/src/tusb_config.h

@@ -34,18 +34,37 @@
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
-// defined by compiler flags for flexibility
+// defined by board.mk
 #ifndef CFG_TUSB_MCU
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-    CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
 #else
-  #define CFG_TUSB_RHPORT0_MODE     OPT_MODE_DEVICE
+  #error "Incorrect RHPort configuration"
 #endif
 
+// This example doesn't use an RTOS
 #define CFG_TUSB_OS                 OPT_OS_NONE
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build

examples/device/cdc_msc/src/tusb_config.h

@@ -64,6 +64,7 @@
   #error "Incorrect RHPort configuration"
 #endif
 
+// This example doesn't use an RTOS
 #define CFG_TUSB_OS               OPT_OS_NONE
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build

examples/device/cdc_msc_freertos/src/tusb_config.h

@@ -34,19 +34,38 @@
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
-// defined by compiler flags for flexibility
+// defined by board.mk
 #ifndef CFG_TUSB_MCU
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-    CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
 #else
-  #define CFG_TUSB_RHPORT0_MODE     OPT_MODE_DEVICE
+  #error "Incorrect RHPort configuration"
 #endif
 
-#define CFG_TUSB_OS                 OPT_OS_FREERTOS
+// This examples use FreeRTOS
+#define CFG_TUSB_OS               OPT_OS_FREERTOS
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0

hw/bsp/stm32h743eval/stm32h743eval.c

@@ -326,14 +326,14 @@ void board_init(void)
   // No VBUS sense
   USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN;
 
+  // B-peripheral session valid override enable
+  USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
+  USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
+
   // Force device mode
   USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD;
   USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
 
-  // B-peripheral session valid override enabl
-  USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
-  USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
-
   HAL_PWREx_EnableUSBVoltageDetector();
 #endif // rhport = 1
 
@@ -367,7 +367,7 @@ int board_uart_write(void const * buf, int len)
 }
 
 
-#if CFG_TUSB_OS  == OPT_OS_NONE
+#if CFG_TUSB_OS == OPT_OS_NONE
 volatile uint32_t system_ticks = 0;
 void SysTick_Handler (void)
 {