- add control_pipe_status for usbh_device_info_t to reflect the status transfer of control pipe

- fix bug with hcd_port_reset
  + remove regs->portsc_bit.port_enable in the wait loop as device unplugged can cause this to always fails
- correct the timeout for hcd_controll_stop/reset 16 uframes ~ 2 ms
- potentially fix bugs device unplugged when new address is not assigned

tests/test/host/test_hid_host_keyboard.c

@@ -131,7 +131,7 @@ pipe_status_t pipe_status_get_stub(pipe_handle_t pipe_hdl, int num_call)
     break;
 
     case 1:
-      return PIPE_STATUS_AVAILABLE;
+      return PIPE_STATUS_READY;
     break;
 
     case 2:
@@ -144,7 +144,7 @@ pipe_status_t pipe_status_get_stub(pipe_handle_t pipe_hdl, int num_call)
     break;
 
     default:
-      return PIPE_STATUS_AVAILABLE;
+      return PIPE_STATUS_READY;
   }
 }
 
@@ -174,7 +174,7 @@ void test_keyboard_get_report_not_available()
   TEST_ASSERT_EQUAL(TUSB_ERROR_CLASS_DATA_NOT_AVAILABLE, tusbh_hid_keyboard_get(device_hdl, instance_num, &report));
 
   tusbh_device_status_get_IgnoreAndReturn(TUSB_DEVICE_STATE_CONFIGURED);
-  usbh_pipe_status_get_IgnoreAndReturn(PIPE_STATUS_AVAILABLE);
+  usbh_pipe_status_get_IgnoreAndReturn(PIPE_STATUS_READY);
   TEST_ASSERT_EQUAL(TUSB_ERROR_CLASS_DATA_NOT_AVAILABLE, tusbh_hid_keyboard_get(device_hdl, instance_num, &report));
 }
 

tinyusb/core/tusb_types.h

@@ -154,7 +154,7 @@ enum {
 #define TUSB_DESC_CONFIG_POWER_MA(x)  ((x)/2)
 
 /// Device State
-typedef enum {
+typedef enum tusb_device_state_{
   TUSB_DEVICE_STATE_UNPLUG = 0  ,
   TUSB_DEVICE_STATE_ADDRESSED   ,
 

tinyusb/host/ehci/ehci.c

@@ -135,7 +135,8 @@ void hcd_port_reset(uint8_t hostid)
 
 #ifndef _TEST_
   // NXP specific, port reset will automatically be 0 when reset sequence complete
-  while( regs->portsc_bit.port_reset || !regs->portsc_bit.port_enable){} // FIXME trapped here once
+  // there is chance device is unplugged while reset sequence is not complete
+  while( regs->portsc_bit.port_reset /*&& regs->portsc_bit.current_connect_status*/ ) {}
 #endif
 }
 
@@ -385,7 +386,7 @@ static tusb_error_t hcd_controller_stop(uint8_t hostid)
 
   regs->usb_cmd_bit.run_stop = 0;
 
-  timeout_set(&timeout, 16); // USB Spec: controller has to stop within 16 uframe
+  timeout_set(&timeout, 2); // USB Spec: controller has to stop within 16 uframe = 2 frames
   while( regs->usb_sts_bit.hc_halted == 0 && !timeout_expired(&timeout)) {}
 
   return timeout_expired(&timeout) ? TUSB_ERROR_OSAL_TIMEOUT : TUSB_ERROR_NONE;
@@ -404,7 +405,7 @@ tusb_error_t hcd_controller_reset(uint8_t hostid)
 
   regs->usb_cmd_bit.reset = 1;
 
-  timeout_set(&timeout, 16); // should not take longer the time to stop controller
+  timeout_set(&timeout, 2); // should not take longer the time to stop controller
   while( regs->usb_cmd_bit.reset && !timeout_expired(&timeout)) {}
 
   return timeout_expired(&timeout) ? TUSB_ERROR_OSAL_TIMEOUT : TUSB_ERROR_NONE;

tinyusb/host/usbh.c

@@ -143,11 +143,14 @@ tusb_error_t usbh_control_xfer_subtask(uint8_t dev_addr, tusb_std_request_t cons
 
   OSAL_SUBTASK_BEGIN
 
+  usbh_device_info_pool[dev_addr].control_pipe_status = PIPE_STATUS_BUSY;
   usbh_device_info_pool[dev_addr].control_request = *p_request;
   (void) hcd_pipe_control_xfer(dev_addr, &usbh_device_info_pool[dev_addr].control_request, data);
 
   osal_semaphore_wait(usbh_device_info_pool[dev_addr].sem_hdl, OSAL_TIMEOUT_NORMAL, &error); // careful of local variable without static
-  SUBTASK_ASSERT_STATUS_WITH_HANDLER(error, tusbh_device_mount_failed_cb(TUSB_ERROR_USBH_MOUNT_DEVICE_NOT_RESPOND, NULL) );
+  // TODO make handler for this function general purpose
+  SUBTASK_ASSERT_STATUS_WITH_HANDLER(error || usbh_device_info_pool[dev_addr].control_pipe_status == PIPE_STATUS_ERROR,
+                                     tusbh_device_mount_failed_cb(TUSB_ERROR_USBH_MOUNT_DEVICE_NOT_RESPOND, NULL) );
 
   OSAL_SUBTASK_END
 }
@@ -183,6 +186,7 @@ void usbh_isr(pipe_handle_t pipe_hdl, uint8_t class_code, tusb_bus_event_t event
 {
   if (class_code == 0) // Control transfer
   {
+    usbh_device_info_pool[ pipe_hdl.dev_addr ].control_pipe_status = (event == BUS_EVENT_XFER_COMPLETE) ? PIPE_STATUS_COMPLETE : PIPE_STATUS_ERROR;
     osal_semaphore_post( usbh_device_info_pool[ pipe_hdl.dev_addr ].sem_hdl );
   }else if (usbh_class_drivers[class_code].isr)
   {

tinyusb/host/usbh.h

@@ -93,10 +93,11 @@
 //  TUSB_CLASS_APPLICATION_SPECIFIC = 0xEF ,
 //  TUSB_CLASS_VENDOR_SPECIFIC      = 0xFF
 
-typedef enum {
-  PIPE_STATUS_AVAILABLE = 0,
+typedef enum pipe_status_{
+  PIPE_STATUS_READY = 0,
   PIPE_STATUS_BUSY,
-  PIPE_STATUS_COMPLETE
+  PIPE_STATUS_COMPLETE,
+  PIPE_STATUS_ERROR
 } pipe_status_t;
 
 typedef uint32_t tusbh_flag_class_t;

tinyusb/host/usbh_hcd.h

@@ -90,11 +90,12 @@ typedef struct { // TODO internal structure, re-order members
   //------------- configuration descriptor info -------------//
   uint8_t interface_count; // bNumInterfaces alias
 
-  uint8_t state;          // value from enum tusbh_device_status_
+  volatile uint8_t state;          // device state, value from enum tusbh_device_state_t
 
   //------------- control pipe -------------//
+  volatile uint8_t control_pipe_status;
   tusb_std_request_t control_request;
-  OSAL_SEM_DEF(semaphore);
+  OSAL_SEM_DEF(semaphore); // TODO move to semaphore pool
   osal_semaphore_handle_t sem_hdl;
 
 } usbh_device_info_t;