remove image and docs folder

update get_started.md

tinyusb/doxygen/get_started.md

@@ -20,7 +20,7 @@ vendor  | Source files from 3rd party such as freeRTOS, fatfs etc ...
 
 ## Import & Build ##
 
-*/demos* is the folder where all the application & project files are located. There are demos for both device and hosts. For each, there are different projects for each of supported RTOS. 
+*repo/demos* is the folder where all the application & project files are located. There are demos for both device and hosts. For each, there are different projects for each of supported RTOS. 
 
 ### Prerequisites ###
 
@@ -34,26 +34,26 @@ In order to build and run application demo, you would need
 To prevent any sort of problems, it is recommended to do **EXACTLY** as follows (esp the item 4)
 
 1. Copy the whole repo folder to your lpcxpresso's workspace.
-2. Click *File->Import*, then expand the *General* folder and select **Existing Projects into Workspace** and click Next ![lpcxpresso_import.png](lpcxpresso_import.png)
-3. On the next dialog, Click *Browse* and choose the **/demos** folder inside the repo. You should see a list of all demo applications ![lpcxpresso_import2.png](lpcxpresso_import2.png).
-4. **IMPORTANT** make sure the option **"Copy projects into workspace"** is **clear**. As demo application uses link folders and this option may cause problem for the import.
+2. Click *File->Import*, then expand the *General* folder and select **Existing Projects into Workspace** and click Next ![lpcxpresso_import.png](http://docs.tinyusb.org/images/lpcxpresso_import.png)
+3. On the next dialog, Click *Browse* and choose the **repo/demos** folder inside the repo. You should see a list of all demo applications ![lpcxpresso_import2.png](http://docs.tinyusb.org/images/lpcxpresso_import2.png).
+4. **IMPORTANT** make sure the option **Copy projects into workspace** is **CLEAR**. As demo application uses link folders and this option may cause problem for the import.
 5. Choose any of the demo application and click *Finish*
-6. Select the configure corresponding to your development board ![lpcxpresso_select_config.png](lpcxpresso_select_config.png)
-7. Then select the correct MCU option from project properties ![lpcxpresso_mcu.png](lpcxpresso_mcu.png) then you are ready to go.
+6. Select the configure corresponding to your development board ![lpcxpresso_select_board.png](http://docs.tinyusb.org/images/lpcxpresso_select_board.png)
+7. Then select the correct MCU option from project properties ![lpcxpresso_mcu.png](http://docs.tinyusb.org/images/lpcxpresso_mcu.png) then you are ready to go.
 
 ### Keil ###
 
 It is relatively simple for Keil
 
-1. Open the desired demo project e.g */demos/host/host_freertos/host_freertos.uvproj*
-2. Select the configure corresponding to your development board ![keil_select_board.png](keil_select_board.png) and build it. 
+1. Open the desired demo project e.g *demos/host/host_freertos/host_freertos.uvproj*
+2. Select the configure corresponding to your development board and build it. ![keil_select_board.png](http://docs.tinyusb.org/images/keil_select_board.png) 
 
 ### IAR ###
 
 IAR is just as easy as Keil
 
-1. Open the desired demo project e.g */demos/host/host_freertos/host_freertos.eww*
-2. Again select the configure corresponding to your development board ![iar_select_board.png](iar_select_board.png) and build it. 
+1. Open the desired demo project e.g *demos/host/host_freertos/host_freertos.eww*
+2. Again select the configure corresponding to your development board and build it. ![iar_select_board.png](http://docs.tinyusb.org/images/iar_select_board.png)
 
 ## Configure demo ##