move doxygen folder outside

tinyusb/doxygen/configuration.txt → doxygen/configuration.txt

@@ -1,78 +1,78 @@
-/** \addtogroup group_configuration
- *  @{ */
-
-//--------------------------------------------------------------------+
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------+
-
-/// \brief tell the stack which mode (host/device/otg) the usb controller0 will be operated on. Possible value is
-/// from \ref group_mode. Note the hardware usb controller must support the selected mode.
-#define TUSB_CFG_CONTROLLER_0_MODE
-
-/** USB controller in MCU often has limited access to specific RAM section. The Stack will use this macro to place internal variables
-  into the USB RAM section as follows. if your mcu's usb controller has no such limit, define TUSB_CFG_ATTR_USBRAM as empty macro.
-
-  @code
-  TUSB_CFG_ATTR_USBRAM uint8_t usb_xfer_buffer[10];
-  @endcode
- */
-#define TUSB_CFG_ATTR_USBRAM
-
-#define TUSB_CFG_MCU          ///< Select one of the supported MCU, the value must be from \ref group_mcu
-#define TUSB_CFG_OS           ///< Select one of the supported RTOS, the value must be from \ref group_supported_os.
-#define TUSB_CFG_OS_TASK_PRIO ///< If \ref TUSB_CFG_OS is configured to use a real RTOS (other than TUSB_OS_NONE). This determines the priority of the usb stack task.
-#define TUSB_CFG_TICKS_HZ     ///< The rate ticks in hert. This is used in conjunction with \ref tusb_tick_get to calculate timing.
-
-//--------------------------------------------------------------------+
-// HOST CONFIGURATION
-//--------------------------------------------------------------------+
-/** \defgroup TUSB_CFG_HOST Host Options
- *  @{ */
-
-/** \brief Maximum number of device host stack can manage
- * \n If hub class is not enabled, set this equal to number of controllers in host mode
- * \n If hub class is enabled, make sure hub is also counted */
-#define TUSB_CFG_HOST_DEVICE_MAX
-
-/// \brief Buffer size used for getting device configuration descriptor. You may want to increase this from default (256)
-/// to support lengthy composite device especially with Audio or Video class
-#define TUSB_CFG_HOST_ENUM_BUFFER_SIZE
-
-/** \defgroup config_host_class Class Driver
- * \brief For each Class Driver a value of 1 means enable, value of 0 mean disable
- * @{ */
-#define TUSB_CFG_HOST_HUB           ///< Enable Hub Class
-#define TUSB_CFG_HOST_HID_KEYBOARD  ///< Enable HID Class for Keyboard
-#define TUSB_CFG_HOST_HID_MOUSE     ///< Enable HID Class for Mouse
-#define TUSB_CFG_HOST_HID_GENERIC   ///< Enable HID Class for Generic (not supported yet)
-#define TUSB_CFG_HOST_MSC           ///< Enable Mass Storage Class (SCSI subclass only)
-#define TUSB_CFG_HOST_CDC           ///< Enable Virtual Serial (Communication Device Class)
-/** @} */
-
-/** @} */ // group Host
-
-//--------------------------------------------------------------------+
-// DEVICE CONFIGURATION
-//--------------------------------------------------------------------+
-/** \defgroup TUSB_CFG_DEVICE Device Options
- *  @{ */
-
-#define TUSB_CFG_DEVICE_CONTROL_ENDOINT_SIZE ///< Max packet size of Cotnrol Endpoint, default is 64
-
-/// Application MUST define this variable and initialize its pointers's member to all required USB descriptors including
-/// Device Descriptor, Configuration Descriptor, String Descriptors, HID Report Descriptors etc ...
-tusbd_descriptor_pointer_t tusbd_descriptor_pointers;
-
-/** \defgroup config_device_class Class Driver
- * \brief For each Class Driver a value of 1 means enable, value of 0 mean disable
- * @{ */
-#define TUSB_CFG_DEVICE_HID_KEYBOARD ///< Enable HID Class for Keyboard
-#define TUSB_CFG_DEVICE_HID_MOUSE 	 ///< Enable HID Class for Mouse
-#define TUSB_CFG_DEVICE_HID_GENERIC  ///< Enable HID Class for Generic (not supported yet)
-#define TUSB_CFG_DEVICE_MSC 				 ///< Enable Mass Storage Class (SCSI subclass only)
-#define TUSB_CFG_DEVICE_CDC 				 ///< Enable Virtual Serial (Communication Device Class)
-/** @} */
-
-/** @} */ // group Device
-
-/** @} */
+/** \addtogroup group_configuration
+ *  @{ */
+
+//--------------------------------------------------------------------+
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------+
+
+/// \brief tell the stack which mode (host/device/otg) the usb controller0 will be operated on. Possible value is
+/// from \ref group_mode. Note the hardware usb controller must support the selected mode.
+#define TUSB_CFG_CONTROLLER_0_MODE
+
+/** USB controller in MCU often has limited access to specific RAM section. The Stack will use this macro to place internal variables
+  into the USB RAM section as follows. if your mcu's usb controller has no such limit, define TUSB_CFG_ATTR_USBRAM as empty macro.
+
+  @code
+  TUSB_CFG_ATTR_USBRAM uint8_t usb_xfer_buffer[10];
+  @endcode
+ */
+#define TUSB_CFG_ATTR_USBRAM
+
+#define TUSB_CFG_MCU          ///< Select one of the supported MCU, the value must be from \ref group_mcu
+#define TUSB_CFG_OS           ///< Select one of the supported RTOS, the value must be from \ref group_supported_os.
+#define TUSB_CFG_OS_TASK_PRIO ///< If \ref TUSB_CFG_OS is configured to use a real RTOS (other than TUSB_OS_NONE). This determines the priority of the usb stack task.
+#define TUSB_CFG_TICKS_HZ     ///< The rate ticks in hert. This is used in conjunction with \ref tusb_tick_get to calculate timing.
+
+//--------------------------------------------------------------------+
+// HOST CONFIGURATION
+//--------------------------------------------------------------------+
+/** \defgroup TUSB_CFG_HOST Host Options
+ *  @{ */
+
+/** \brief Maximum number of device host stack can manage
+ * \n If hub class is not enabled, set this equal to number of controllers in host mode
+ * \n If hub class is enabled, make sure hub is also counted */
+#define TUSB_CFG_HOST_DEVICE_MAX
+
+/// \brief Buffer size used for getting device configuration descriptor. You may want to increase this from default (256)
+/// to support lengthy composite device especially with Audio or Video class
+#define TUSB_CFG_HOST_ENUM_BUFFER_SIZE
+
+/** \defgroup config_host_class Class Driver
+ * \brief For each Class Driver a value of 1 means enable, value of 0 mean disable
+ * @{ */
+#define TUSB_CFG_HOST_HUB           ///< Enable Hub Class
+#define TUSB_CFG_HOST_HID_KEYBOARD  ///< Enable HID Class for Keyboard
+#define TUSB_CFG_HOST_HID_MOUSE     ///< Enable HID Class for Mouse
+#define TUSB_CFG_HOST_HID_GENERIC   ///< Enable HID Class for Generic (not supported yet)
+#define TUSB_CFG_HOST_MSC           ///< Enable Mass Storage Class (SCSI subclass only)
+#define TUSB_CFG_HOST_CDC           ///< Enable Virtual Serial (Communication Device Class)
+/** @} */
+
+/** @} */ // group Host
+
+//--------------------------------------------------------------------+
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------+
+/** \defgroup TUSB_CFG_DEVICE Device Options
+ *  @{ */
+
+#define TUSB_CFG_DEVICE_CONTROL_ENDOINT_SIZE ///< Max packet size of Cotnrol Endpoint, default is 64
+
+/// Application MUST define this variable and initialize its pointers's member to all required USB descriptors including
+/// Device Descriptor, Configuration Descriptor, String Descriptors, HID Report Descriptors etc ...
+tusbd_descriptor_pointer_t tusbd_descriptor_pointers;
+
+/** \defgroup config_device_class Class Driver
+ * \brief For each Class Driver a value of 1 means enable, value of 0 mean disable
+ * @{ */
+#define TUSB_CFG_DEVICE_HID_KEYBOARD ///< Enable HID Class for Keyboard
+#define TUSB_CFG_DEVICE_HID_MOUSE 	 ///< Enable HID Class for Mouse
+#define TUSB_CFG_DEVICE_HID_GENERIC  ///< Enable HID Class for Generic (not supported yet)
+#define TUSB_CFG_DEVICE_MSC 				 ///< Enable Mass Storage Class (SCSI subclass only)
+#define TUSB_CFG_DEVICE_CDC 				 ///< Enable Virtual Serial (Communication Device Class)
+/** @} */
+
+/** @} */ // group Device
+
+/** @} */

tinyusb.Doxyfile

@@ -749,7 +749,7 @@ WARN_LOGFILE           =
 # spaces.
 # Note: If this tag is empty the current directory is searched.
 
-INPUT                  = tinyusb/doxygen/group_def.txt \
+INPUT                  = doxygen \
                          readme.markdown \
                          tinyusb \
                          boards \