rename OPT_MODE_

examples/device/device_virtual_com/src/tusb_config.h

@@ -48,8 +48,8 @@
 //--------------------------------------------------------------------+
 //#define CFG_TUSB_MCU will be passed from IDE/command line for easy board/mcu switching
 
-#define CFG_TUSB_CONTROLLER_0_MODE  (TUSB_MODE_DEVICE)
-//#define CFG_TUSB_CONTROLLER_1_MODE  (TUSB_MODE_DEVICE)
+#define CFG_TUSB_CONTROLLER_0_MODE  (OPT_MODE_DEVICE)
+//#define CFG_TUSB_CONTROLLER_1_MODE  (OPT_MODE_DEVICE)
 
 //--------------------------------------------------------------------+
 // DEVICE CONFIGURATION

examples/device/nrf52840/src/tusb_config.h

@@ -49,7 +49,7 @@
 //#define CFG_TUSB_MCU will be passed from IDE/command line for easy board/mcu switching
 
 #define CFG_TUSB_MCU                    OPT_MCU_NRF5X
-#define CFG_TUSB_CONTROLLER_0_MODE      (TUSB_MODE_DEVICE)
+#define CFG_TUSB_CONTROLLER_0_MODE      (OPT_MODE_DEVICE)
 
 //--------------------------------------------------------------------+
 // DEVICE CONFIGURATION

examples/obsolete/device/src/tusb_config.h

@@ -48,8 +48,8 @@
 //--------------------------------------------------------------------+
 //#define CFG_TUSB_MCU will be passed from IDE/command line for easy board/mcu switching
 
-#define CFG_TUSB_CONTROLLER_0_MODE  (TUSB_MODE_DEVICE)
-//#define CFG_TUSB_CONTROLLER_1_MODE  (TUSB_MODE_DEVICE)
+#define CFG_TUSB_CONTROLLER_0_MODE  (OPT_MODE_DEVICE)
+//#define CFG_TUSB_CONTROLLER_1_MODE  (OPT_MODE_DEVICE)
 
 //--------------------------------------------------------------------+
 // DEVICE CONFIGURATION

examples/obsolete/host/src/tusb_config.h

@@ -47,7 +47,7 @@
 // CONTROLLER CONFIGURATION
 //--------------------------------------------------------------------+
 //#define CFG_TUSB_MCU will be passed from IDE for easy board/mcu switching
-#define CFG_TUSB_CONTROLLER_0_MODE      (TUSB_MODE_HOST)
+#define CFG_TUSB_CONTROLLER_0_MODE      (OPT_MODE_HOST)
 
 //--------------------------------------------------------------------+
 // HOST CONFIGURATION

hw/bsp/ea4357/board_ea4357.c

@@ -99,7 +99,7 @@ void board_init(void)
   // USB0 Power: EA4357 channel B U20 GPIO26 active low (base board), P2_3 on LPC4357
   scu_pinmux(0x02, 3, MD_PUP | MD_EZI, FUNC7);		// USB0 VBus Power
 
-  #if CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_DEVICE
+  #if CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_DEVICE
   scu_pinmux(0x09, 5, GPIO_PDN, FUNC4); // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low.
   GPIO_SetDir(5, BIT_(18), 1);
   #endif

tests/support/tusb_config.h

@@ -46,8 +46,8 @@
 //--------------------------------------------------------------------+
 // CONTROLLER CONFIGURATION
 //--------------------------------------------------------------------+
-#define CFG_TUSB_CONTROLLER_0_MODE        (TUSB_MODE_HOST | TUSB_MODE_DEVICE)
-#define CFG_TUSB_CONTROLLER_1_MODE        (TUSB_MODE_NONE)
+#define CFG_TUSB_CONTROLLER_0_MODE        (OPT_MODE_HOST | OPT_MODE_DEVICE)
+#define CFG_TUSB_CONTROLLER_1_MODE        (OPT_MODE_NONE)
 
 //--------------------------------------------------------------------+
 // HOST CONFIGURATION
@@ -65,7 +65,7 @@
 
 // Test support
 #define TEST_CONTROLLER_HOST_START_INDEX \
- ( ((CONTROLLER_HOST_NUMBER == 1) && (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST)) ? 1 : 0)
+ ( ((CONTROLLER_HOST_NUMBER == 1) && (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST)) ? 1 : 0)
 
 //--------------------------------------------------------------------+
 // DEVICE CONFIGURATION

tinyusb/device/usbd.c

@@ -200,11 +200,11 @@ static tusb_error_t usbd_main_st(void);
 
 tusb_error_t usbd_init (void)
 {
-  #if (CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_DEVICE)
+  #if (CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_DEVICE)
   dcd_init(0);
   #endif
 
-  #if (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_DEVICE)
+  #if (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_DEVICE)
   dcd_init(1);
   #endif
 

tinyusb/host/ehci/ehci.c

@@ -61,7 +61,7 @@ CFG_TUSB_ATTR_USBRAM STATIC_VAR ehci_data_t ehci_data;
 
 #if EHCI_PERIODIC_LIST
 
-  #if (CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_HOST)
+  #if (CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_HOST)
   CFG_TUSB_ATTR_USBRAM ATTR_ALIGNED(4096) STATIC_VAR ehci_link_t period_frame_list0[EHCI_FRAMELIST_SIZE];
 
     #ifndef __ICCARM__ // IAR cannot able to determine the alignment with datalignment pragma
@@ -69,7 +69,7 @@ CFG_TUSB_ATTR_USBRAM STATIC_VAR ehci_data_t ehci_data;
     #endif
   #endif
 
-  #if (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST)
+  #if (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST)
   CFG_TUSB_ATTR_USBRAM ATTR_ALIGNED(4096) STATIC_VAR ehci_link_t period_frame_list1[EHCI_FRAMELIST_SIZE];
 
     #ifndef __ICCARM__ // IAR cannot able to determine the alignment with datalignment pragma
@@ -133,11 +133,11 @@ tusb_error_t hcd_init(void)
   //------------- Data Structure init -------------//
   memclr_(&ehci_data, sizeof(ehci_data_t));
 
-  #if (CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_HOST)
+  #if (CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_HOST)
     ASSERT_ERR (hcd_controller_init(0));
   #endif
 
-  #if (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST)
+  #if (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST)
     ASSERT_ERR (hcd_controller_init(1));
   #endif
 
@@ -794,12 +794,12 @@ static inline ehci_link_t* get_period_frame_list(uint8_t hostid)
 {
   switch(hostid)
   {
-#if (CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_HOST)
+#if (CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_HOST)
     case 0:
       return period_frame_list0;
 #endif
 
-#if (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST)
+#if (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST)
     case 1:
       return period_frame_list1;
 #endif
@@ -811,7 +811,7 @@ static inline ehci_link_t* get_period_frame_list(uint8_t hostid)
 
 static inline uint8_t hostid_to_data_idx(uint8_t hostid)
 {
-  #if (CONTROLLER_HOST_NUMBER == 1) && (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST)
+  #if (CONTROLLER_HOST_NUMBER == 1) && (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST)
     (void) hostid;
     return 0;
   #else

tinyusb/portable/nxp/lpc43xx_lpc18xx/dcd_lpc43xx.c

@@ -70,11 +70,11 @@ typedef struct {
 extern ATTR_WEAK dcd_data_t dcd_data0;
 extern ATTR_WEAK dcd_data_t dcd_data1;
 
-#if (CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_DEVICE)
+#if (CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_DEVICE)
 CFG_TUSB_ATTR_USBRAM ATTR_ALIGNED(2048) STATIC_VAR dcd_data_t dcd_data0;
 #endif
 
-#if (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_DEVICE)
+#if (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_DEVICE)
 CFG_TUSB_ATTR_USBRAM ATTR_ALIGNED(2048) STATIC_VAR dcd_data_t dcd_data1;
 #endif
 

tinyusb/portable/nxp/lpc43xx_lpc18xx/hal_lpc43xx.c

@@ -93,7 +93,7 @@ bool tusb_hal_init(void)
   // reset controller & set role
   hal_controller_reset(0);
 
-  #if CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_HOST
+  #if CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_HOST
     LPC_USB0->USBMODE_H = LPC43XX_USBMODE_HOST | (LPC43XX_USBMODE_VBUS_HIGH << 5);
   #else // TODO OTG
     LPC_USB0->USBMODE_D = LPC43XX_USBMODE_DEVICE;
@@ -111,11 +111,11 @@ bool tusb_hal_init(void)
 
   /* connect CLK_USB1 to 60 MHz clock */
   CGU_EntityConnect(CGU_CLKSRC_PLL1, CGU_BASE_USB1); /* FIXME Run base BASE_USB1_CLK clock from PLL1 (assume PLL1 is 60 MHz, no division required) */
-  LPC_SCU->SFSUSB = (CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST) ? 0x16 : 0x12; // enable USB1 with on-chip FS PHY
+  LPC_SCU->SFSUSB = (CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST) ? 0x16 : 0x12; // enable USB1 with on-chip FS PHY
 
   hal_controller_reset(1);
 
-  #if CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST
+  #if CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST
     LPC_USB1->USBMODE_H = LPC43XX_USBMODE_HOST | (LPC43XX_USBMODE_VBUS_HIGH << 5);
   #else // TODO OTG
     LPC_USB1->USBMODE_D = LPC43XX_USBMODE_DEVICE;

tinyusb/tusb_option.h

@@ -60,7 +60,7 @@
 /** @} */
 
 /** \defgroup group_supported_os Supported RTOS
- * \brief \ref CFG_TUSB_OS must be defined to one of these
+ *  \ref CFG_TUSB_OS must be defined to one of these
  *  @{ */
 #define OPT_OS_NONE       1 ///< No RTOS is used
 #define OPT_OS_FREERTOS   2 ///< FreeRTOS is used
@@ -83,32 +83,32 @@
 /** \defgroup group_mode Controller Mode Selection
  * \brief CFG_TUSB_CONTROLLER_N_MODE must be defined with these
  *  @{ */
-#define TUSB_MODE_HOST    0x02 ///< Host Mode
-#define TUSB_MODE_DEVICE  0x01 ///< Device Mode
-#define TUSB_MODE_NONE    0x00 ///< Disabled
+#define OPT_MODE_HOST    0x02 ///< Host Mode
+#define OPT_MODE_DEVICE  0x01 ///< Device Mode
+#define OPT_MODE_NONE    0x00 ///< Disabled
 /** @} */
 
 #ifndef CFG_TUSB_CONTROLLER_0_MODE
-  #define CFG_TUSB_CONTROLLER_0_MODE TUSB_MODE_NONE
+  #define CFG_TUSB_CONTROLLER_0_MODE OPT_MODE_NONE
 #endif
 
 #ifndef CFG_TUSB_CONTROLLER_1_MODE
-  #define CFG_TUSB_CONTROLLER_1_MODE TUSB_MODE_NONE
+  #define CFG_TUSB_CONTROLLER_1_MODE OPT_MODE_NONE
 #endif
 
 #define CONTROLLER_HOST_NUMBER (\
-    ((CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_HOST) ? 1 : 0) + \
-    ((CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_HOST) ? 1 : 0))
+    ((CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_HOST) ? 1 : 0) + \
+    ((CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_HOST) ? 1 : 0))
 
 #define CONTROLLER_DEVICE_NUMBER (\
-    ((CFG_TUSB_CONTROLLER_0_MODE & TUSB_MODE_DEVICE) ? 1 : 0) + \
-    ((CFG_TUSB_CONTROLLER_1_MODE & TUSB_MODE_DEVICE) ? 1 : 0))
+    ((CFG_TUSB_CONTROLLER_0_MODE & OPT_MODE_DEVICE) ? 1 : 0) + \
+    ((CFG_TUSB_CONTROLLER_1_MODE & OPT_MODE_DEVICE) ? 1 : 0))
 
 #define MODE_HOST_SUPPORTED   (CONTROLLER_HOST_NUMBER > 0)
 #define MODE_DEVICE_SUPPORTED (CONTROLLER_DEVICE_NUMBER > 0)
 
 #if !MODE_HOST_SUPPORTED && !MODE_DEVICE_SUPPORTED
-  #error please configure at least 1 CFG_TUSB_CONTROLLER_N_MODE to TUSB_MODE_HOST and/or TUSB_MODE_DEVICE
+  #error please configure at least 1 CFG_TUSB_CONTROLLER_N_MODE to OPT_MODE_HOST and/or OPT_MODE_DEVICE
 #endif
 
 //--------------------------------------------------------------------+