more clean up

examples/device/device_virtual_com/src/main.c

@@ -94,12 +94,12 @@ void virtual_com_task(void)
 //--------------------------------------------------------------------+
 // tinyusb callbacks
 //--------------------------------------------------------------------+
-void tud_mount_cb(uint8_t port)
+void tud_mount_cb(void)
 {
 
 }
 
-void tud_umount_cb(uint8_t port)
+void tud_umount_cb(void)
 {
 }
 

examples/device/nrf52840/src/main.c

@@ -95,12 +95,12 @@ void virtual_com_task(void)
 //--------------------------------------------------------------------+
 // tinyusb callbacks
 //--------------------------------------------------------------------+
-void tud_mount_cb(uint8_t rhport)
+void tud_mount_cb(void)
 {
 
 }
 
-void tud_umount_cb(uint8_t rhport)
+void tud_umount_cb(void)
 {
 }
 

examples/obsolete/device/src/main.c

@@ -111,15 +111,17 @@ int main(void)
 //--------------------------------------------------------------------+
 // tinyusb callbacks
 //--------------------------------------------------------------------+
-void tud_mount_cb(uint8_t rhport)
+void tud_mount_cb(void)
 {
+  uint8_t rhport = 0; // TODO remove
   cdc_serial_app_mount(rhport);
   keyboard_app_mount(rhport);
   msc_app_mount(rhport);
 }
 
-void tud_umount_cb(uint8_t rhport)
+void tud_umount_cb(void)
 {
+  uint8_t rhport = 0; // TODO remove
   cdc_serial_app_umount(rhport);
   keyboard_app_umount(rhport);
   msc_app_umount(rhport);

src/device/usbd.c

@@ -323,7 +323,7 @@ static tusb_error_t proc_control_request_st(uint8_t rhport, tusb_control_request
       {
         TU_ASSERT( len <= CFG_TUD_CTRL_BUFSIZE, TUSB_ERROR_NOT_ENOUGH_MEMORY);
         memcpy(_usbd_ctrl_buf, buffer, len);
-        usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, (uint8_t*) _usbd_ctrl_buf, len );
+        usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, _usbd_ctrl_buf, len );
       }else
       {
         dcd_control_stall(rhport); // stall unsupported descriptor
@@ -332,7 +332,7 @@ static tusb_error_t proc_control_request_st(uint8_t rhport, tusb_control_request
     else if (TUSB_REQ_GET_CONFIGURATION == p_request->bRequest )
     {
       memcpy(_usbd_ctrl_buf, &_usbd_dev.config_num, 1);
-      usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, (uint8_t*) _usbd_ctrl_buf, 1);
+      usbd_control_xfer_st(rhport, p_request->bmRequestType_bit.direction, _usbd_ctrl_buf, 1);
     }
     else if ( TUSB_REQ_SET_ADDRESS == p_request->bRequest )
     {
@@ -452,7 +452,7 @@ static tusb_error_t proc_set_config_req(uint8_t rhport, uint8_t config_number)
   }
 
   // invoke callback
-  tud_mount_cb(rhport);
+  tud_mount_cb();
 
   return TUSB_ERROR_NONE;
 }
@@ -551,7 +551,7 @@ void dcd_bus_event(uint8_t rhport, usbd_bus_event_type_t bus_event)
 
     case USBD_BUS_EVENT_UNPLUGGED:
       varclr_(&_usbd_dev);
-      tud_umount_cb(rhport); // invoke callback
+      tud_umount_cb(); // invoke callback
     break;
 
     case USBD_BUS_EVENT_SUSPENDED:
@@ -632,8 +632,8 @@ void usbd_defer_func(osal_task_func_t func, void* param, bool isr )
 {
   usbd_task_event_t event =
   {
-      .rhport       = 0,
-      .event_id     = USBD_EVT_FUNC_CALL,
+      .rhport   = 0,
+      .event_id = USBD_EVT_FUNC_CALL,
   };
 
   event.func_call.func  = func;

src/device/usbd.h

@@ -78,18 +78,16 @@ bool tud_mounted(void);
 // APPLICATION CALLBACK
 //--------------------------------------------------------------------+
 /** \brief 			Callback function that will be invoked device is mounted (configured) by USB host
- * \param[in] 	rhport USB Controller ID of the interface
  * \note        This callback should be used by Application to \b set-up application data
  */
-void tud_mount_cb(uint8_t rhport);
+void tud_mount_cb(void);
 
 /** \brief 			Callback function that will be invoked when device is unmounted (bus reset/unplugged)
- * \param[in] 	rhport USB Controller ID of the interface
  * \note        This callback should be used by Application to \b tear-down application data
  */
-void tud_umount_cb(uint8_t rhport);
+void tud_umount_cb(void);
 
-//void tud_device_suspended_cb(uint8_t rhport);
+//void tud_device_suspended_cb(void);
 
 #ifdef __cplusplus
  }