Merge pull request #1350 from hathach/enhance-multipl-ports

Enhance rhports management

examples/device/audio_4_channel_mic/src/tusb_config.h

@@ -39,11 +39,7 @@ extern "C" {
 #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
-#else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
-#endif
 
 #ifndef CFG_TUSB_OS
 #define CFG_TUSB_OS                 OPT_OS_NONE

examples/device/audio_test/src/tusb_config.h

@@ -39,11 +39,7 @@ extern "C" {
 #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
-#else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
-#endif
 
 #ifndef CFG_TUSB_OS
 #define CFG_TUSB_OS                 OPT_OS_NONE

examples/device/cdc_dual_ports/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/cdc_msc/src/tusb_config.h

@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\
-      TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\
-      TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/dfu/src/tusb_config.h

@@ -27,14 +27,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/dfu_runtime/src/tusb_config.h

@@ -27,14 +27,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/dynamic_configuration/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/hid_boot_interface/src/tusb_config.h

@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X || \
-       CFG_TUSB_MCU == OPT_MCU_FT90X   || CFG_TUSB_MCU == OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/hid_composite/src/tusb_config.h

@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\
-      TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\
-      TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/hid_composite_freertos/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/hid_generic_inout/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/hid_multiple_interface/src/tusb_config.h

@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || \
-       CFG_TUSB_MCU == OPT_MCU_FT90X   || CFG_TUSB_MCU == OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/midi_test/src/tusb_config.h

@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || \
-       CFG_TUSB_MCU == OPT_MCU_FT90X   || CFG_TUSB_MCU == OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/msc_dual_lun/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/net_lwip_webserver/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/uac2_headset/src/tusb_config.h

@@ -42,11 +42,7 @@ extern "C" {
 #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
-#else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
-#endif
 
 #ifndef CFG_TUSB_OS
 #define CFG_TUSB_OS                 OPT_OS_NONE

examples/device/usbtmc/src/tusb_config.h

@@ -27,14 +27,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/video_capture/src/tusb_config.h

@@ -40,14 +40,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/webusb_serial/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

hw/bsp/board.h

@@ -120,7 +120,7 @@ static inline void board_delay(uint32_t ms)
   uint32_t start_ms = board_millis();
   while (board_millis() - start_ms < ms)
   {
-    #if TUSB_OPT_DEVICE_ENABLED
+    #if CFG_TUD_ENABLED
     // take chance to run usb background
     tud_task();
     #endif

hw/bsp/brtmm90x/family.c

@@ -30,7 +30,7 @@
 #include <registers/ft900_registers.h>
 #include <ft900.h>
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 int8_t board_ft90x_vbus(void); // Board specific implementation of VBUS detection for USB device.
 extern void ft90x_usbd_pm_ISR(uint16_t pmcfg); // Interrupt handler for USB device power management
 #endif
@@ -152,14 +152,14 @@ void board_pm_ISR(void)
               MASK_SYS_PMCFG_HOST_RESUME_DEV)
     )
     {
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
         ft90x_usbd_pm_ISR(pmcfg);
 #endif
     }
 #endif
 }
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 int8_t board_ft90x_vbus(void)
 {
 	return gpio_read(USBD_VBUS_DTC_PIN);

hw/bsp/d5035_01/d5035_01.c

@@ -270,7 +270,7 @@ void board_init(void)
 #endif
 
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 #if CFG_TUSB_DEBUG >= 2
 	uart_send_str(BOARD_NAME " USB device enabled\n");
 #endif

hw/bsp/da14695_dk_usb/da14695_dk_usb.c

@@ -73,7 +73,7 @@ void board_init(void)
   // 1ms tick timer
   SysTick_Config(SystemCoreClock / 1000);
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   // This board is USB powered there is no need to monitor
   // VBUS line.  Notify driver that VBUS is present.
   tusb_vbus_changed(true);

hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c

@@ -36,7 +36,7 @@ void USB_IRQHandler(void)
   tud_int_handler(0);
 }
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 // DA146xx driver function that must be called whenever VBUS changes
 extern void tusb_vbus_changed(bool present);
 
@@ -85,7 +85,7 @@ void board_init(void)
   // 1ms tick timer
   SysTick_Config(SystemCoreClock / 1000);
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   // Setup interrupt for both connect and disconnect
   CRG_TOP->VBUS_IRQ_MASK_REG = CRG_TOP_VBUS_IRQ_MASK_REG_VBUS_IRQ_EN_FALL_Msk |
                                CRG_TOP_VBUS_IRQ_MASK_REG_VBUS_IRQ_EN_RISE_Msk;

hw/bsp/frdm_kl25z/frdm_kl25z.c

@@ -39,10 +39,10 @@
 //--------------------------------------------------------------------+
 void USB0_IRQHandler(void)
 {
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
   tuh_int_handler(0);
 #endif
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   tud_int_handler(0);
 #endif
 }

hw/bsp/lpcxpresso1769/lpcxpresso1769.c

@@ -156,12 +156,12 @@ void board_init(void)
 //    0x1B // Host + Device + OTG + AHB
   };
 
-  uint32_t const clk_en = TUSB_OPT_DEVICE_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST;
+  uint32_t const clk_en = CFG_TUD_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST;
 
   LPC_USB->OTGClkCtrl = clk_en;
   while ( (LPC_USB->OTGClkSt & clk_en) != clk_en );
 
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
   // set portfunc to host !!!
   LPC_USB->StCtrl = 0x3; // should be 1
 #endif

hw/bsp/mbed1768/mbed1768.c

@@ -130,12 +130,12 @@ void board_init(void)
 //    0x1B // Host + Device + OTG + AHB
   };
 
-  uint32_t const clk_en = TUSB_OPT_DEVICE_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST;
+  uint32_t const clk_en = CFG_TUD_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST;
 
   LPC_USB->OTGClkCtrl = clk_en;
   while ( (LPC_USB->OTGClkSt & clk_en) != clk_en );
 
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
   // set portfunc to host !!!
   LPC_USB->StCtrl = 0x3; // should be 1
 #endif

hw/bsp/msp432e4/family.c

@@ -33,10 +33,10 @@
 //--------------------------------------------------------------------+
 void USB0_IRQHandler(void)
 {
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
   tuh_int_handler(0);
 #endif
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   tud_int_handler(0);
 #endif
 }
@@ -123,7 +123,7 @@ void board_init(void)
   GPIOB->AMSEL      = TU_BIT(0) | TU_BIT(1);
   GPIOL->AMSEL      = TU_BIT(6) | TU_BIT(7);
 
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
   /* USB PD6(EPEN) */
   bits              = TU_BIT(3);
   SYSCTL->RCGCGPIO |= bits;
@@ -144,11 +144,11 @@ void board_init(void)
 
   USB0->CC          = USB_CC_CLKEN | (3u << USB_CC_CLKDIV_S); /* 60MHz = 240MHz / 4 */
   __DMB(); /* Wait for completion of opening of the clock gate */
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
   USB0->GPCS = USB_GPCS_DEVMOD_OTG;
   USB0->EPC  = USB_EPC_EPENDE | USB_EPC_EPEN_HIGH;
 #endif
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   USB0->GPCS = USB_GPCS_DEVMOD_DEVVBUS;
 #endif
 }

hw/bsp/nrf/family.c

@@ -100,7 +100,7 @@ void board_init(void)
   nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler);
 
   //------------- USB -------------//
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice
   // 2 is highest for application
   NVIC_SetPriority(USBD_IRQn, 2);

hw/bsp/rp2040/family.c

@@ -138,11 +138,11 @@ void board_init(void)
 #endif
 
   // todo probably set up device mode?
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 
 #endif
 
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
   // set portfunc to host !!!
 #endif
 }

hw/bsp/rx/boards/rx65n_target/rx65n_target.c

@@ -176,10 +176,10 @@ void INT_Excep_SCI5_RXI5(void)
 //--------------------------------------------------------------------+
 void INT_Excep_USB0_USBI0(void)
 {
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
   tuh_int_handler(0);
 #endif
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   tud_int_handler(0);
 #endif
 }

hw/bsp/same54xplainedpro/same54xplainedpro.c

@@ -223,7 +223,7 @@ void board_init(void)
 #endif
 
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 #if CFG_TUSB_DEBUG >= 2
 	uart_send_str(BOARD_NAME " USB device enabled\n");
 #endif

hw/bsp/tm4c123/family.c

@@ -7,11 +7,11 @@
 //--------------------------------------------------------------------+
 void USB0_Handler(void)
 {
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
   tuh_int_handler(0);
 #endif
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   tud_int_handler(0);
 #endif
 }

src/class/audio/audio_device.c

@@ -50,7 +50,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_AUDIO)
+#if (CFG_TUD_ENABLED && CFG_TUD_AUDIO)
 
 //--------------------------------------------------------------------+
 // INCLUDE
@@ -2291,4 +2291,4 @@ uint8_t audiod_get_audio_fct_idx(audiod_function_t * audio)
   return 0;
 }
 
-#endif //TUSB_OPT_DEVICE_ENABLED && CFG_TUD_AUDIO
+#endif //CFG_TUD_ENABLED && CFG_TUD_AUDIO

src/class/bth/bth_device.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_BTH)
+#if (CFG_TUD_ENABLED && CFG_TUD_BTH)
 
 //--------------------------------------------------------------------+
 // INCLUDE

src/class/cdc/cdc_device.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_CDC)
+#if (CFG_TUD_ENABLED && CFG_TUD_CDC)
 
 #include "device/usbd.h"
 #include "device/usbd_pvt.h"

src/class/cdc/cdc_host.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_HOST_ENABLED && CFG_TUH_CDC)
+#if (CFG_TUH_ENABLED && CFG_TUH_CDC)
 
 #include "host/usbh.h"
 #include "host/usbh_classdriver.h"

src/class/cdc/cdc_rndis_host.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_HOST_ENABLED && CFG_TUH_CDC && CFG_TUH_CDC_RNDIS)
+#if (CFG_TUH_ENABLED && CFG_TUH_CDC && CFG_TUH_CDC_RNDIS)
 
 //--------------------------------------------------------------------+
 // INCLUDE
@@ -35,6 +35,16 @@
 #include "cdc_host.h"
 #include "cdc_rndis_host.h"
 
+#if 0  // TODO remove subtask related macros later
+// Sub Task
+#define OSAL_SUBTASK_BEGIN
+#define OSAL_SUBTASK_END                    return TUSB_ERROR_NONE;
+
+#define STASK_RETURN(_error)                return _error;
+#define STASK_INVOKE(_subtask, _status)     (_status) = _subtask
+#define STASK_ASSERT(_cond)                 TU_VERIFY(_cond, TUSB_ERROR_OSAL_TASK_FAILED)
+#endif
+
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF
 //--------------------------------------------------------------------+

src/class/dfu/dfu_device.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_DFU)
+#if (CFG_TUD_ENABLED && CFG_TUD_DFU)
 
 #include "device/usbd.h"
 #include "device/usbd_pvt.h"

src/class/dfu/dfu_rt_device.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_DFU_RUNTIME)
+#if (CFG_TUD_ENABLED && CFG_TUD_DFU_RUNTIME)
 
 #include "device/usbd.h"
 #include "device/usbd_pvt.h"

src/class/hid/hid_device.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_HID)
+#if (CFG_TUD_ENABLED && CFG_TUD_HID)
 
 //--------------------------------------------------------------------+
 // INCLUDE

src/class/hid/hid_host.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_HOST_ENABLED && CFG_TUH_HID)
+#if (CFG_TUH_ENABLED && CFG_TUH_HID)
 
 #include "host/usbh.h"
 #include "host/usbh_classdriver.h"

src/class/midi/midi_device.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_MIDI)
+#if (CFG_TUD_ENABLED && CFG_TUD_MIDI)
 
 //--------------------------------------------------------------------+
 // INCLUDE

src/class/msc/msc_device.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_MSC)
+#if (CFG_TUD_ENABLED && CFG_TUD_MSC)
 
 #include "device/usbd.h"
 #include "device/usbd_pvt.h"

src/class/msc/msc_host.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_HOST_ENABLED & CFG_TUH_MSC
+#if CFG_TUH_ENABLED && CFG_TUH_MSC
 
 #include "host/usbh.h"
 #include "host/usbh_classdriver.h"

src/class/net/ecm_rndis_device.c

@@ -27,7 +27,7 @@
 
 #include "tusb_option.h"
 
-#if ( TUSB_OPT_DEVICE_ENABLED && CFG_TUD_ECM_RNDIS )
+#if ( CFG_TUD_ENABLED && CFG_TUD_ECM_RNDIS )
 
 #include "device/usbd.h"
 #include "device/usbd_pvt.h"

src/class/net/ncm_device.c

@@ -28,7 +28,7 @@
 
 #include "tusb_option.h"
 
-#if ( TUSB_OPT_DEVICE_ENABLED && CFG_TUD_NCM )
+#if ( CFG_TUD_ENABLED && CFG_TUD_NCM )
 
 #include "device/usbd.h"
 #include "device/usbd_pvt.h"

src/class/usbtmc/usbtmc_device.c

@@ -68,7 +68,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_USBTMC)
+#if (CFG_TUD_ENABLED && CFG_TUD_USBTMC)
 
 #include "device/usbd.h"
 #include "device/usbd_pvt.h"

src/class/vendor/vendor_device.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_VENDOR)
+#if (CFG_TUD_ENABLED && CFG_TUD_VENDOR)
 
 #include "device/usbd.h"
 #include "device/usbd_pvt.h"

src/class/vendor/vendor_host.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_HOST_ENABLED && CFG_TUH_VENDOR)
+#if (CFG_TUH_ENABLED && CFG_TUH_VENDOR)
 
 //--------------------------------------------------------------------+
 // INCLUDE

src/class/video/video_device.c

@@ -27,7 +27,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_VIDEO && CFG_TUD_VIDEO_STREAMING)
+#if (CFG_TUD_ENABLED && CFG_TUD_VIDEO && CFG_TUD_VIDEO_STREAMING)
 
 #include "device/usbd.h"
 #include "device/usbd_pvt.h"

src/common/tusb_error.h

@@ -64,6 +64,8 @@ typedef enum
 #if CFG_TUSB_DEBUG
 /// Enum to String for debugging purposes. Only available if \ref CFG_TUSB_DEBUG > 0
 extern char const* const tusb_strerr[TUSB_ERROR_COUNT];
+extern char const* const tusb_speed_str[];
+
 #endif
 
 #ifdef __cplusplus

src/device/dcd_attr.h → src/common/tusb_mcu_attr.h

@@ -24,16 +24,16 @@
  * This file is part of the TinyUSB stack.
  */
 
-#ifndef TUSB_DCD_ATTR_H_
-#define TUSB_DCD_ATTR_H_
-
-#include "tusb_option.h"
-
-// Attribute includes
-// - ENDPOINT_MAX: max (logical) number of endpoint
-// - ENDPOINT_EXCLUSIVE_NUMBER: endpoint number with different direction IN and OUT aren't allowed,
-//                              e.g EP1 OUT & EP1 IN cannot exist together
-// - PORT_HIGHSPEED: mask to indicate which port support highspeed mode, bit0 for port0 and so on.
+#ifndef TUSB_MCU_ATTR_H_
+#define TUSB_MCU_ATTR_H_
+
+/* USB Controller Attributes for Device, Host or MCU (both)
+ * - ENDPOINT_MAX: max (logical) number of endpoint
+ * - ENDPOINT_EXCLUSIVE_NUMBER: endpoint number with different direction IN and OUT aren't allowed,
+ *                              e.g EP1 OUT & EP1 IN cannot exist together
+ * - RHPORT_HIGHSPEED: mask to indicate which port support highspeed mode (without external PHY)
+ *                     bit0 for port0 and so on.
+ */
 
 //------------- NXP -------------//
 #if   TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX)
@@ -41,11 +41,15 @@
 
 #elif TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX)
   #define DCD_ATTR_ENDPOINT_MAX   16
+  #define HCD_ATTR_OHCI
 
 #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX)
   // TODO USB0 has 6, USB1 has 4
-  #define DCD_ATTR_CONTROLLER_CHIPIDEA_HS
-  #define DCD_ATTR_ENDPOINT_MAX   6
+  #define MCU_ATTR_CONTROLLER_CHIPIDEA_HS
+  #define DCD_ATTR_ENDPOINT_MAX     6
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01 // Port0 HS, Port1 FS
+
+  #define HCD_ATTR_EHCI
 
 #elif TU_CHECK_MCU(OPT_MCU_LPC51UXX)
    #define DCD_ATTR_ENDPOINT_MAX   5
@@ -59,8 +63,11 @@
   #define DCD_ATTR_ENDPOINT_MAX   6
 
 #elif TU_CHECK_MCU(OPT_MCU_MIMXRT10XX)
-  #define DCD_ATTR_CONTROLLER_CHIPIDEA_HS
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define MCU_ATTR_CONTROLLER_CHIPIDEA_HS
+  #define DCD_ATTR_ENDPOINT_MAX     8
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x03 // Port0 HS, Port1 HS
+
+  #define HCD_ATTR_EHCI
 
 #elif TU_CHECK_MCU(OPT_MCU_MKL25ZXX, OPT_MCU_K32L2BXX)
   #define DCD_ATTR_ENDPOINT_MAX   16
@@ -83,7 +90,8 @@
   #define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER
 
 #elif TU_CHECK_MCU(OPT_MCU_SAMX7X)
-  #define DCD_ATTR_ENDPOINT_MAX   10
+  #define DCD_ATTR_ENDPOINT_MAX     10
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
   #define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER
 
 #elif TU_CHECK_MCU(OPT_MCU_PIC32MZ)
@@ -145,7 +153,8 @@
 
 //------------- Sony -------------//
 #elif TU_CHECK_MCU(OPT_MCU_CXD56)
-  #define DCD_ATTR_ENDPOINT_MAX   7
+  #define DCD_ATTR_ENDPOINT_MAX     7
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
   #define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER
 
 //------------- TI -------------//
@@ -167,7 +176,8 @@
   #define DCD_ATTR_ENDPOINT_MAX   6
 
 #elif TU_CHECK_MCU(OPT_MCU_NUC505)
-  #define DCD_ATTR_ENDPOINT_MAX   12
+  #define DCD_ATTR_ENDPOINT_MAX     12
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
 
 //------------- Espressif -------------//
 #elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
@@ -195,7 +205,8 @@
 
 //------------- Broadcom -------------//
 #elif TU_CHECK_MCU(OPT_MCU_BCM2711, OPT_MCU_BCM2835, OPT_MCU_BCM2837)
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define DCD_ATTR_ENDPOINT_MAX     8
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
 
 //------------- Broadcom -------------//
 #elif TU_CHECK_MCU(OPT_MCU_XMC4000)
@@ -203,23 +214,31 @@
 
 //------------- BridgeTek -------------//
 #elif TU_CHECK_MCU(OPT_MCU_FT90X)
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define DCD_ATTR_ENDPOINT_MAX     8
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
 
 #elif TU_CHECK_MCU(OPT_MCU_FT93X)
-  #define DCD_ATTR_ENDPOINT_MAX   16
+  #define DCD_ATTR_ENDPOINT_MAX     16
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
 
 //------------ Allwinner -------------//
 #elif TU_CHECK_MCU(OPT_MCU_F1C100S)
   #define DCD_ATTR_ENDPOINT_MAX   4
 
-#else
+#endif
+
+//--------------------------------------------------------------------+
+// Default Values
+//--------------------------------------------------------------------+
+
+#ifndef DCD_ATTR_ENDPOINT_MAX
   #warning "DCD_ATTR_ENDPOINT_MAX is not defined for this MCU, default to 8"
   #define DCD_ATTR_ENDPOINT_MAX   8
 #endif
 
 // Default to fullspeed if not defined
-//#ifndef PORT_HIGHSPEED
-//  #define DCD_ATTR_PORT_HIGHSPEED 0x00
-//#endif
+#ifndef DCD_ATTR_RHPORT_HIGHSPEED
+  #define DCD_ATTR_RHPORT_HIGHSPEED 0x00
+#endif
 
 #endif

src/device/dcd.h

@@ -30,7 +30,6 @@
 #include "common/tusb_common.h"
 #include "osal/osal.h"
 #include "common/tusb_fifo.h"
-#include "dcd_attr.h"
 
 #ifdef __cplusplus
  extern "C" {

src/device/usbd.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 
 #include "tusb.h"
 #include "device/usbd.h"
@@ -269,11 +269,12 @@ static inline usbd_class_driver_t const * get_driver(uint8_t drvid)
 // DCD Event
 //--------------------------------------------------------------------+
 
-static bool _usbd_initialized = false;
+enum { RHPORT_INVALID = 0xFFu };
+static uint8_t _usbd_rhport = RHPORT_INVALID;
 
 // Event queue
 // OPT_MODE_DEVICE is used by OS NONE for mutex (disable usb isr)
-OSAL_QUEUE_DEF(OPT_MODE_DEVICE, _usbd_qdef, CFG_TUD_TASK_QUEUE_SZ, dcd_event_t);
+OSAL_QUEUE_DEF(usbd_int_set, _usbd_qdef, CFG_TUD_TASK_QUEUE_SZ, dcd_event_t);
 static osal_queue_t _usbd_q;
 
 // Mutex for claiming endpoint, only needed when using with preempted RTOS
@@ -331,8 +332,6 @@ static char const* const _tusb_std_request_str[] =
   "Synch Frame"
 };
 
-static char const* const _tusb_speed_str[] = { "Full", "Low", "High" };
-
 // for usbd_control to print the name of control complete driver
 void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback)
 {
@@ -376,21 +375,21 @@ bool tud_remote_wakeup(void)
 {
   // only wake up host if this feature is supported and enabled and we are suspended
   TU_VERIFY (_usbd_dev.suspended && _usbd_dev.remote_wakeup_support && _usbd_dev.remote_wakeup_en );
-  dcd_remote_wakeup(TUD_OPT_RHPORT);
+  dcd_remote_wakeup(_usbd_rhport);
   return true;
 }
 
 bool tud_disconnect(void)
 {
   TU_VERIFY(dcd_disconnect);
-  dcd_disconnect(TUD_OPT_RHPORT);
+  dcd_disconnect(_usbd_rhport);
   return true;
 }
 
 bool tud_connect(void)
 {
   TU_VERIFY(dcd_connect);
-  dcd_connect(TUD_OPT_RHPORT);
+  dcd_connect(_usbd_rhport);
   return true;
 }
 
@@ -399,13 +398,13 @@ bool tud_connect(void)
 //--------------------------------------------------------------------+
 bool tud_inited(void)
 {
-  return _usbd_initialized;
+  return _usbd_rhport != RHPORT_INVALID;
 }
 
 bool tud_init (uint8_t rhport)
 {
   // skip if already initialized
-  if (_usbd_initialized) return _usbd_initialized;
+  if ( tud_inited() ) return true;
 
   TU_LOG2("USBD init\r\n");
 
@@ -439,7 +438,7 @@ bool tud_init (uint8_t rhport)
   dcd_init(rhport);
   dcd_int_enable(rhport);
 
-  _usbd_initialized = true;
+  _usbd_rhport = rhport;
 
   return true;
 }
@@ -508,7 +507,7 @@ void tud_task (void)
     switch ( event.event_id )
     {
       case DCD_EVENT_BUS_RESET:
-        TU_LOG2(": %s Speed\r\n", _tusb_speed_str[event.bus_reset.speed]);
+        TU_LOG2(": %s Speed\r\n", tusb_speed_str[event.bus_reset.speed]);
         usbd_reset(event.rhport);
         _usbd_dev.speed = event.bus_reset.speed;
       break;
@@ -1173,6 +1172,17 @@ void dcd_event_xfer_complete (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_
 // USBD API For Class Driver
 //--------------------------------------------------------------------+
 
+void usbd_int_set(bool enabled)
+{
+  if (enabled)
+  {
+    dcd_int_enable(_usbd_rhport);
+  }else
+  {
+    dcd_int_disable(_usbd_rhport);
+  }
+}
+
 // Parse consecutive endpoint descriptors (IN & OUT)
 bool usbd_open_edpt_pair(uint8_t rhport, uint8_t const* p_desc, uint8_t ep_count, uint8_t xfer_type, uint8_t* ep_out, uint8_t* ep_in)
 {

src/device/usbd.h

@@ -453,7 +453,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 0x04 : 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000)
 
@@ -502,7 +502,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 0x04 : 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000)
 
@@ -550,7 +550,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 0x04 : 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\
   /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\
@@ -558,7 +558,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
 
 //   Calculate wMaxPacketSize of Endpoints
 #define TUD_AUDIO_EP_SIZE(_maxFrequency, _nBytesPerSample, _nChannels) \
-    ((((_maxFrequency + ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 7999 : 999)) / ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 8000 : 1000)) + 1) * _nBytesPerSample * _nChannels)
+    ((((_maxFrequency + (TUD_OPT_HIGH_SPEED ? 7999 : 999)) / (TUD_OPT_HIGH_SPEED ? 8000 : 1000)) + 1) * _nBytesPerSample * _nChannels)
 
 
 //--------------------------------------------------------------------+

src/device/usbd_control.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 
 #include "tusb.h"
 #include "device/usbd_pvt.h"

src/device/usbd_pvt.h

@@ -58,6 +58,8 @@ usbd_class_driver_t const* usbd_app_driver_get_cb(uint8_t* driver_count) TU_ATTR
 
 typedef bool (*usbd_control_xfer_cb_t)(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request);
 
+void usbd_int_set(bool enabled);
+
 //--------------------------------------------------------------------+
 // USBD Endpoint API
 //--------------------------------------------------------------------+

src/host/hcd.h

@@ -30,7 +30,6 @@
 #include "common/tusb_common.h"
 #include "osal/osal.h"
 #include "common/tusb_fifo.h"
-#include "hcd_attr.h"
 
 #ifdef __cplusplus
  extern "C" {
@@ -82,7 +81,7 @@ typedef struct
 
 } hcd_event_t;
 
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
 // Max number of endpoints per device
 enum {
   // TODO better computation

src/host/hcd_attr.h

@@ -1,105 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2021, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef TUSB_HCD_ATTR_H_
-#define TUSB_HCD_ATTR_H_
-
-#include "tusb_option.h"
-
-// Attribute includes
-// - ENDPOINT_MAX: max (logical) number of endpoint
-// - PORT_HIGHSPEED: mask to indicate which port support highspeed mode, bit0 for port0 and so on.
-
-//------------- NXP -------------//
-#if TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX)
-  #define HCD_ATTR_OHCI
-
-#elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX)
-  #define HCD_ATTR_EHCI_TRANSDIMENSION
-
-#elif TU_CHECK_MCU(OPT_MCU_LPC54XXX)
-  // #define HCD_ATTR_EHCI_NXP_PTD
-
-#elif TU_CHECK_MCU(OPT_MCU_LPC55XX)
-  // #define HCD_ATTR_EHCI_NXP_PTD
-
-#elif TU_CHECK_MCU(OPT_MCU_MIMXRT10XX)
-  #define HCD_ATTR_EHCI_TRANSDIMENSION
-
-#elif TU_CHECK_MCU(OPT_MCU_MKL25ZXX)
-
-//------------- Microchip -------------//
-#elif TU_CHECK_MCU(OPT_MCU_SAMD21, OPT_MCU_SAMD51, OPT_MCU_SAME5X) || \
-      TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAML21, OPT_MCU_SAML22)
-
-#elif TU_CHECK_MCU(OPT_MCU_SAMG)
-
-#elif TU_CHECK_MCU(OPT_MCU_SAMX7X)
-
-//------------- ST -------------//
-#elif TU_CHECK_MCU(OPT_MCU_STM32F0, OPT_MCU_STM32F1, OPT_MCU_STM32F3) || \
-      TU_CHECK_MCU(OPT_MCU_STM32L0, OPT_MCU_STM32L1, OPT_MCU_STM32L4)
-
-#elif TU_CHECK_MCU(OPT_MCU_STM32F2, OPT_MCU_STM32F3, OPT_MCU_STM32F4)
-
-#elif TU_CHECK_MCU(OPT_MCU_STM32F7)
-
-#elif TU_CHECK_MCU(OPT_MCU_STM32H7)
-
-//------------- Sony -------------//
-#elif TU_CHECK_MCU(OPT_MCU_CXD56)
-
-//------------- Nuvoton -------------//
-#elif TU_CHECK_MCU(OPT_MCU_NUC505)
-
-//------------- Espressif -------------//
-#elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
-
-//------------- Raspberry Pi -------------//
-#elif TU_CHECK_MCU(OPT_MCU_RP2040)
-
-//------------- Silabs -------------//
-#elif TU_CHECK_MCU(OPT_MCU_EFM32GG)
-
-//------------- Renesas -------------//
-#elif TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N)
-
-//#elif TU_CHECK_MCU(OPT_MCU_MM32F327X)
-//  #define DCD_ATTR_ENDPOINT_MAX not known yet
-
-//------------- GigaDevice -------------//
-#elif TU_CHECK_MCU(OPT_MCU_GD32VF103)
-
-#else
-//  #warning "DCD_ATTR_ENDPOINT_MAX is not defined for this MCU, default to 8"
-#endif
-
-// Default to fullspeed if not defined
-//#ifndef PORT_HIGHSPEED
-//  #define DCD_ATTR_PORT_HIGHSPEED 0x00
-//#endif
-
-#endif

src/host/hub.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if (TUSB_OPT_HOST_ENABLED && CFG_TUH_HUB)
+#if (CFG_TUH_ENABLED && CFG_TUH_HUB)
 
 #include "usbh.h"
 #include "usbh_classdriver.h"

src/host/usbh.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
 
 #include "tusb.h"
 #include "host/usbh.h"
@@ -215,7 +215,7 @@ CFG_TUSB_MEM_SECTION usbh_device_t _usbh_devices[CFG_TUH_DEVICE_MAX + CFG_TUH_HU
 
 // Event queue
 // role device/host is used by OS NONE for mutex (disable usb isr)
-OSAL_QUEUE_DEF(OPT_MODE_HOST, _usbh_qdef, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t);
+OSAL_QUEUE_DEF(usbh_int_set, _usbh_qdef, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t);
 static osal_queue_t _usbh_q;
 
 CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN static uint8_t _usbh_ctrl_buf[CFG_TUH_ENUMERATION_BUFSIZE];
@@ -434,6 +434,18 @@ uint8_t* usbh_get_enum_buf(void)
   return _usbh_ctrl_buf;
 }
 
+void usbh_int_set(bool enabled)
+{
+  // TODO all host controller
+  if (enabled)
+  {
+    hcd_int_enable(TUH_OPT_RHPORT);
+  }else
+  {
+    hcd_int_disable(TUH_OPT_RHPORT);
+  }
+}
+
 //--------------------------------------------------------------------+
 // HCD Event Handler
 //--------------------------------------------------------------------+
@@ -697,6 +709,7 @@ static bool enum_new_device(hcd_event_t* event)
     if ( !hcd_port_connect_status(_dev0.rhport) ) return true;
 
     _dev0.speed = hcd_port_speed_get(_dev0.rhport );
+    TU_LOG2("%s Speed\r\n", tusb_speed_str[_dev0.speed]);
 
     enum_request_addr0_device_desc();
   }

src/host/usbh_classdriver.h

@@ -57,6 +57,8 @@ uint8_t usbh_get_rhport(uint8_t dev_addr);
 
 uint8_t* usbh_get_enum_buf(void);
 
+void usbh_int_set(bool enabled);
+
 //--------------------------------------------------------------------+
 // USBH Endpoint API
 //--------------------------------------------------------------------+

src/host/usbh_control.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
 
 #include "tusb.h"
 #include "usbh_classdriver.h"

src/osal/osal.h

@@ -31,9 +31,6 @@
  extern "C" {
 #endif
 
-/** \addtogroup group_osal
- *  @{ */
-
 #include "common/tusb_common.h"
 
 // Return immediately
@@ -67,47 +64,26 @@ typedef void (*osal_task_func_t)( void * );
 
 //--------------------------------------------------------------------+
 // OSAL Porting API
+// Should be implemented as static inline function in osal_port.h header
+/*
+    static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t* semdef);
+    static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr);
+    static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec);
+    static inline void osal_semaphore_reset(osal_semaphore_t sem_hdl); // TODO removed
+
+    static inline osal_mutex_t osal_mutex_create(osal_mutex_def_t* mdef);
+    static inline bool osal_mutex_lock (osal_mutex_t sem_hdl, uint32_t msec);
+    static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl);
+
+    static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef);
+    static inline bool osal_queue_receive(osal_queue_t qhdl, void* data);
+    static inline bool osal_queue_send(osal_queue_t qhdl, void const * data, bool in_isr);
+    static inline bool osal_queue_empty(osal_queue_t qhdl);
+*/
 //--------------------------------------------------------------------+
 
-#if __GNUC__ && !defined(__ARMCC_VERSION)
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wredundant-decls"
-#endif
-//------------- Semaphore -------------//
-static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t* semdef);
-static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr);
-static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec);
-
-static inline void osal_semaphore_reset(osal_semaphore_t sem_hdl); // TODO removed
-
-//------------- Mutex -------------//
-static inline osal_mutex_t osal_mutex_create(osal_mutex_def_t* mdef);
-static inline bool osal_mutex_lock (osal_mutex_t sem_hdl, uint32_t msec);
-static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl);
-
-//------------- Queue -------------//
-static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef);
-static inline bool osal_queue_receive(osal_queue_t qhdl, void* data);
-static inline bool osal_queue_send(osal_queue_t qhdl, void const * data, bool in_isr);
-static inline bool osal_queue_empty(osal_queue_t qhdl);
-#if __GNUC__ && !defined(__ARMCC_VERSION)
-#pragma GCC diagnostic pop
-#endif
-
-#if 0  // TODO remove subtask related macros later
-// Sub Task
-#define OSAL_SUBTASK_BEGIN
-#define OSAL_SUBTASK_END                    return TUSB_ERROR_NONE;
-
-#define STASK_RETURN(_error)                return _error;
-#define STASK_INVOKE(_subtask, _status)     (_status) = _subtask
-#define STASK_ASSERT(_cond)                 TU_VERIFY(_cond, TUSB_ERROR_OSAL_TASK_FAILED)
-#endif
-
 #ifdef __cplusplus
  }
 #endif
 
-/** @} */
-
 #endif /* _TUSB_OSAL_H_ */

src/osal/osal_freertos.h

@@ -115,7 +115,7 @@ static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl)
 //--------------------------------------------------------------------+
 
 // role device/host is used by OS NONE for mutex (disable usb isr) only
-#define OSAL_QUEUE_DEF(_role, _name, _depth, _type) \
+#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \
   static _type _name##_##buf[_depth];\
   osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf };
 

src/osal/osal_mynewt.h

@@ -96,7 +96,7 @@ static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl)
 //--------------------------------------------------------------------+
 
 // role device/host is used by OS NONE for mutex (disable usb isr) only
-#define OSAL_QUEUE_DEF(_role, _name, _depth, _type) \
+#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \
   static _type _name##_##buf[_depth];\
   static struct os_event _name##_##evbuf[_depth];\
   osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf, .evbuf =  _name##_##evbuf};\

src/osal/osal_none.h

@@ -103,59 +103,34 @@ static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl)
 //--------------------------------------------------------------------+
 #include "common/tusb_fifo.h"
 
-// extern to avoid including dcd.h and hcd.h
-#if TUSB_OPT_DEVICE_ENABLED
-extern void dcd_int_disable(uint8_t rhport);
-extern void dcd_int_enable(uint8_t rhport);
-#endif
-
-#if TUSB_OPT_HOST_ENABLED
-extern void hcd_int_disable(uint8_t rhport);
-extern void hcd_int_enable(uint8_t rhport);
-#endif
-
 typedef struct
 {
-    uint8_t role; // device or host
-    tu_fifo_t ff;
+  void (*interrupt_set)(bool);
+  tu_fifo_t ff;
 }osal_queue_def_t;
 
 typedef osal_queue_def_t* osal_queue_t;
 
 // role device/host is used by OS NONE for mutex (disable usb isr) only
-#define OSAL_QUEUE_DEF(_role, _name, _depth, _type)       \
+#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type)    \
   uint8_t _name##_buf[_depth*sizeof(_type)];              \
   osal_queue_def_t _name = {                              \
-    .role = _role,                                        \
+    .interrupt_set = _int_set,                            \
     .ff = TU_FIFO_INIT(_name##_buf, _depth, _type, false) \
   }
 
 // lock queue by disable USB interrupt
 static inline void _osal_q_lock(osal_queue_t qhdl)
 {
-  (void) qhdl;
-
-#if TUSB_OPT_DEVICE_ENABLED
-  if (qhdl->role == OPT_MODE_DEVICE) dcd_int_disable(TUD_OPT_RHPORT);
-#endif
-
-#if TUSB_OPT_HOST_ENABLED
-  if (qhdl->role == OPT_MODE_HOST) hcd_int_disable(TUH_OPT_RHPORT);
-#endif
+  // disable dcd/hcd interrupt
+  qhdl->interrupt_set(false);
 }
 
 // unlock queue
 static inline void _osal_q_unlock(osal_queue_t qhdl)
 {
-  (void) qhdl;
-
-#if TUSB_OPT_DEVICE_ENABLED
-  if (qhdl->role == OPT_MODE_DEVICE) dcd_int_enable(TUD_OPT_RHPORT);
-#endif
-
-#if TUSB_OPT_HOST_ENABLED
-  if (qhdl->role == OPT_MODE_HOST) hcd_int_enable(TUH_OPT_RHPORT);
-#endif
+  // enable dcd/hcd interrupt
+  qhdl->interrupt_set(true);
 }
 
 static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef)

src/osal/osal_pico.h

@@ -100,7 +100,7 @@ static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl)
 //--------------------------------------------------------------------+
 #include "common/tusb_fifo.h"
 
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
 extern void hcd_int_disable(uint8_t rhport);
 extern void hcd_int_enable(uint8_t rhport);
 #endif
@@ -114,7 +114,7 @@ typedef struct
 typedef osal_queue_def_t* osal_queue_t;
 
 // role device/host is used by OS NONE for mutex (disable usb isr) only
-#define OSAL_QUEUE_DEF(_role, _name, _depth, _type)       \
+#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type)       \
   uint8_t _name##_buf[_depth*sizeof(_type)];              \
   osal_queue_def_t _name = {                              \
     .ff = TU_FIFO_INIT(_name##_buf, _depth, _type, false) \

src/osal/osal_rtthread.h

@@ -90,7 +90,7 @@ static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl) {
 //--------------------------------------------------------------------+
 
 // role device/host is used by OS NONE for mutex (disable usb isr) only
-#define OSAL_QUEUE_DEF(_role, _name, _depth, _type) \
+#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \
     static _type _name##_##buf[_depth]; \
     osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf };
 

src/osal/osal_rtx4.h

@@ -111,7 +111,7 @@ static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl)
 //--------------------------------------------------------------------+
 
 // role device/host is used by OS NONE for mutex (disable usb isr) only
-#define OSAL_QUEUE_DEF(_role, _name, _depth, _type)   \
+#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type)   \
   os_mbx_declare(_name##__mbox, _depth);              \
   _declare_box(_name##__pool, sizeof(_type), _depth); \
   osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .pool = _name##__pool, .mbox = _name##__mbox };

src/portable/bridgetek/ft9xx/dcd_ft9xx.c

@@ -31,7 +31,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && \
+#if CFG_TUD_ENABLED && \
   (CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X) 
 
 #include <stdint.h>

src/portable/broadcom/synopsys/dcd_synopsys.c

@@ -29,7 +29,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED &&         \
+#if CFG_TUD_ENABLED &&         \
     (CFG_TUSB_MCU == OPT_MCU_BCM2711 ) \
 
 

src/portable/chipidea/ci_hs/dcd_ci_hs.c

@@ -25,9 +25,8 @@
  */
 
 #include "tusb_option.h"
-#include "device/dcd_attr.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && defined(DCD_ATTR_CONTROLLER_CHIPIDEA_HS)
+#if CFG_TUD_ENABLED && defined(MCU_ATTR_CONTROLLER_CHIPIDEA_HS)
 
 //--------------------------------------------------------------------+
 // INCLUDE

src/portable/chipidea/ci_hs/hcd_ci_hs.c

@@ -28,7 +28,7 @@
 
 // Chipidea Highspeed USB IP implement EHCI for host functionality
 
-#if TUSB_OPT_HOST_ENABLED && \
+#if CFG_TUH_ENABLED && \
     (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX)
 
 //--------------------------------------------------------------------+

src/portable/dialog/da146xx/dcd_da146xx.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_DA1469X
+#if CFG_TUD_ENABLED && CFG_TUSB_MCU == OPT_MCU_DA1469X
 
 #include "mcu/mcu.h"
 

src/portable/ehci/ehci.c

@@ -24,9 +24,9 @@
  * This file is part of the TinyUSB stack.
  */
 
-#include "host/hcd_attr.h"
+#include "tusb_option.h"
 
-#if TUSB_OPT_HOST_ENABLED && defined(HCD_ATTR_EHCI_TRANSDIMENSION)
+#if CFG_TUH_ENABLED && defined(HCD_ATTR_EHCI)
 
 //--------------------------------------------------------------------+
 // INCLUDE
@@ -45,7 +45,7 @@
 #define EHCI_DBG     2
 
 // Framelist size as small as possible to save SRAM
-#ifdef HCD_ATTR_EHCI_TRANSDIMENSION
+#ifdef MCU_ATTR_CONTROLLER_CHIPIDEA_HS
   // NXP Transdimension: 8 elements
   #define FRAMELIST_SIZE_BIT_VALUE      7u
   #define FRAMELIST_SIZE_USBCMD_VALUE   (((FRAMELIST_SIZE_BIT_VALUE &  3) << EHCI_USBCMD_POS_FRAMELIST_SIZE) | \

src/portable/espressif/esp32sx/dcd_esp32sx.c

@@ -28,7 +28,7 @@
 
 #include "tusb_option.h"
 
-#if (((CFG_TUSB_MCU == OPT_MCU_ESP32S2) ||  (CFG_TUSB_MCU == OPT_MCU_ESP32S3)) && TUSB_OPT_DEVICE_ENABLED)
+#if (((CFG_TUSB_MCU == OPT_MCU_ESP32S2) ||  (CFG_TUSB_MCU == OPT_MCU_ESP32S3)) && CFG_TUD_ENABLED)
 
 // Espressif
 #include "freertos/xtensa_api.h"

src/portable/mentor/musb/dcd_musb.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && \
+#if CFG_TUD_ENABLED && \
   TU_CHECK_MCU(OPT_MCU_MSP432E4, OPT_MCU_TM4C123, OPT_MCU_TM4C129)
 
 #if __GNUC__ > 8 && defined(__ARM_FEATURE_UNALIGNED)

src/portable/mentor/musb/hcd_musb.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_HOST_ENABLED && \
+#if CFG_TUH_ENABLED && \
   TU_CHECK_MCU(OPT_MCU_MSP432E4, OPT_MCU_TM4C123, OPT_MCU_TM4C129)
 
 #if __GNUC__ > 8 && defined(__ARM_FEATURE_UNALIGNED)

src/portable/microchip/pic32mz/dcd_pic32mz.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_PIC32MZ
+#if CFG_TUD_ENABLED && CFG_TUSB_MCU == OPT_MCU_PIC32MZ
 
 #include <common/tusb_common.h>
 #include <device/dcd.h>

src/portable/microchip/samd/dcd_samd.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && \
+#if CFG_TUD_ENABLED && \
     (CFG_TUSB_MCU == OPT_MCU_SAMD11 || CFG_TUSB_MCU == OPT_MCU_SAMD21 || \
      CFG_TUSB_MCU == OPT_MCU_SAMD51 || CFG_TUSB_MCU == OPT_MCU_SAME5X || \
      CFG_TUSB_MCU == OPT_MCU_SAML22 || CFG_TUSB_MCU == OPT_MCU_SAML21)

src/portable/microchip/samx7x/dcd_samx7x.c

@@ -27,7 +27,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_SAMX7X
+#if CFG_TUD_ENABLED && CFG_TUSB_MCU == OPT_MCU_SAMX7X
 
 #include "device/dcd.h"
 #include "sam.h"

src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && ( CFG_TUSB_MCU == OPT_MCU_MM32F327X )
+#if CFG_TUD_ENABLED && ( CFG_TUSB_MCU == OPT_MCU_MM32F327X )
 
 #include "reg_usb_otg_fs.h"
 #include "mm32_device.h"

src/portable/nordic/nrf5x/dcd_nrf5x.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_NRF5X
+#if CFG_TUD_ENABLED && CFG_TUSB_MCU == OPT_MCU_NRF5X
 
 #include "nrf.h"
 #include "nrf_clock.h"

src/portable/nuvoton/nuc120/dcd_nuc120.c

@@ -35,7 +35,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && (CFG_TUSB_MCU == OPT_MCU_NUC120)
+#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_NUC120)
 
 #include "device/dcd.h"
 #include "NUC100Series.h"

src/portable/nuvoton/nuc121/dcd_nuc121.c

@@ -35,7 +35,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && ( (CFG_TUSB_MCU == OPT_MCU_NUC121) || (CFG_TUSB_MCU == OPT_MCU_NUC126) )
+#if CFG_TUD_ENABLED && ( (CFG_TUSB_MCU == OPT_MCU_NUC121) || (CFG_TUSB_MCU == OPT_MCU_NUC126) )
 
 #include "device/dcd.h"
 #include "NuMicro.h"

src/portable/nuvoton/nuc505/dcd_nuc505.c

@@ -35,7 +35,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && (CFG_TUSB_MCU == OPT_MCU_NUC505)
+#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_NUC505)
 
 #include "device/dcd.h"
 #include "NUC505Series.h"

src/portable/nxp/khci/dcd_khci.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && ( \
+#if CFG_TUD_ENABLED && ( \
       ( CFG_TUSB_MCU == OPT_MCU_MKL25ZXX ) || ( CFG_TUSB_MCU == OPT_MCU_K32L2BXX ) \
     )
 

src/portable/nxp/khci/hcd_khci.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_HOST_ENABLED && ( \
+#if CFG_TUH_ENABLED && ( \
       ( CFG_TUSB_MCU == OPT_MCU_MKL25ZXX ) || ( CFG_TUSB_MCU == OPT_MCU_K32L2BXX ) \
     )
 

src/portable/nxp/lpc17_40/dcd_lpc17_40.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && \
+#if CFG_TUD_ENABLED && \
     (CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX)
 
 #include "device/dcd.h"

src/portable/nxp/lpc17_40/hcd_lpc17_40.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_HOST_ENABLED && \
+#if CFG_TUH_ENABLED && \
     (CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX)
 
 #include "chip.h"

src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c

@@ -34,7 +34,7 @@
  * - LPC54114
  * - LPC55s69
  */
-#if TUSB_OPT_DEVICE_ENABLED && ( CFG_TUSB_MCU == OPT_MCU_LPC11UXX || \
+#if CFG_TUD_ENABLED && ( CFG_TUSB_MCU == OPT_MCU_LPC11UXX || \
                                  CFG_TUSB_MCU == OPT_MCU_LPC13XX  || \
                                  CFG_TUSB_MCU == OPT_MCU_LPC15XX  || \
                                  CFG_TUSB_MCU == OPT_MCU_LPC51UXX || \

src/portable/nxp/transdimension/dcd_transdimension.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && \
+#if CFG_TUD_ENABLED && \
     (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX)
 
 #warning "transdimenion is renamed to chipidea (portable/chipidea/ci_hs) to match other opensource naming convention such as linux. This file will be removed in the future, please update your makefile accordingly"

src/portable/nxp/transdimension/hcd_transdimension.c

@@ -28,7 +28,7 @@
 
 // NXP Trans-Dimension USB IP implement EHCI for host functionality
 
-#if TUSB_OPT_HOST_ENABLED && \
+#if CFG_TUH_ENABLED && \
     (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX)
 
 #warning "transdimenion is renamed to chipidea (portable/chipidea/ci_hs) to match other opensource naming convention such as linux. This file will be removed in the future, please update your makefile accordingly"

src/portable/ohci/ohci.c

@@ -24,9 +24,9 @@
  * This file is part of the TinyUSB stack.
  */
 
-#include "host/hcd_attr.h"
+#include "tusb_option.h"
 
-#if TUSB_OPT_HOST_ENABLED && defined(HCD_ATTR_OHCI)
+#if CFG_TUH_ENABLED && defined(HCD_ATTR_OHCI)
 
 //--------------------------------------------------------------------+
 // INCLUDE

src/portable/raspberrypi/rp2040/dcd_rp2040.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_RP2040
+#if CFG_TUD_ENABLED && CFG_TUSB_MCU == OPT_MCU_RP2040
 
 #include "pico.h"
 #include "rp2040_usb.h"

src/portable/raspberrypi/rp2040/hcd_rp2040.c

@@ -27,7 +27,7 @@
 
 #include "tusb_option.h"
 
-#if TUSB_OPT_HOST_ENABLED && CFG_TUSB_MCU == OPT_MCU_RP2040
+#if CFG_TUH_ENABLED && CFG_TUSB_MCU == OPT_MCU_RP2040
 
 #include "pico.h"
 #include "rp2040_usb.h"

src/portable/raspberrypi/rp2040/rp2040_usb.c

@@ -87,7 +87,7 @@ void _hw_endpoint_buffer_control_update32(struct hw_endpoint *ep, uint32_t and_m
             *ep->buffer_control = value & ~USB_BUF_CTRL_AVAIL;
             // 12 cycle delay.. (should be good for 48*12Mhz = 576Mhz)
             // Don't need delay in host mode as host is in charge
-#if !TUSB_OPT_HOST_ENABLED
+#if !CFG_TUH_ENABLED
             __asm volatile (
                     "b 1f\n"
                     "1: b 1f\n"

src/portable/raspberrypi/rp2040/rp2040_usb.h

@@ -56,7 +56,7 @@ typedef struct hw_endpoint
     // Interrupt, bulk, etc
     uint8_t transfer_type;
     
-#if TUSB_OPT_HOST_ENABLED
+#if CFG_TUH_ENABLED
     // Only needed for host
     uint8_t dev_addr;