Merge pull request #309 from pigrew/stm32_hal_updates

Stm32 F0,F3,F4 updates

hw/bsp/stm32f070rbnucleo/stm32f070rbnucleo.c

@@ -182,7 +182,7 @@ void HardFault_Handler (void)
   * @param  line: assert_param error line source number
   * @retval None
   */
-void assert_failed(char *file, uint32_t line)
+void assert_failed(uint8_t* file, uint32_t line)
 { 
   TU_LOG1("Assertion failed (%s:%ld)\r\n", file, line);
 }

hw/bsp/stm32f070rbnucleo/stm32f0xx_hal_conf.h

@@ -1,34 +1,18 @@
 /**
   ******************************************************************************
-  * @file    GPIO/GPIO_IOToggle/Inc/stm32f3xx_hal_conf.h
+  * @file    stm32f0xx_hal_conf.h
   * @author  MCD Application Team
   * @brief   HAL configuration file.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -50,46 +34,41 @@
   */
 #define HAL_MODULE_ENABLED  
 /*#define HAL_ADC_MODULE_ENABLED   */
-/*#define HAL_CRYP_MODULE_ENABLED   */
 /*#define HAL_CAN_MODULE_ENABLED   */
 /*#define HAL_CEC_MODULE_ENABLED   */
 /*#define HAL_COMP_MODULE_ENABLED   */
+#define HAL_CORTEX_MODULE_ENABLED
 /*#define HAL_CRC_MODULE_ENABLED   */
-/*#define HAL_CRYP_MODULE_ENABLED   */
-/*#define HAL_TSC_MODULE_ENABLED   */
 /*#define HAL_DAC_MODULE_ENABLED   */
-/*#define HAL_I2S_MODULE_ENABLED   */
-/*#define HAL_IWDG_MODULE_ENABLED   */
-/*#define HAL_LCD_MODULE_ENABLED   */
-/*#define HAL_LPTIM_MODULE_ENABLED   */
-/*#define HAL_RNG_MODULE_ENABLED   */
-/*#define HAL_RTC_MODULE_ENABLED   */
-/*#define HAL_SPI_MODULE_ENABLED   */
-/*#define HAL_TIM_MODULE_ENABLED   */
-#define HAL_UART_MODULE_ENABLED
-/*#define HAL_USART_MODULE_ENABLED   */
-/*#define HAL_IRDA_MODULE_ENABLED   */
-/*#define HAL_SMARTCARD_MODULE_ENABLED   */
-/*#define HAL_SMBUS_MODULE_ENABLED   */
-/*#define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_PCD_MODULE_ENABLED
-/*#define HAL_EXTI_MODULE_ENABLED   */
-#define HAL_CORTEX_MODULE_ENABLED
 #define HAL_DMA_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
+/*#define HAL_EXTI_MODULE_ENABLED   */
+/*#define HAL_I2C_MODULE_ENABLED */
+/*#define HAL_I2S_MODULE_ENABLED */
+/*#define HAL_IRDA_MODULE_ENABLED */
+/*#define HAL_IWDG_MODULE_ENABLED */
+#define HAL_PCD_MODULE_ENABLED
 #define HAL_PWR_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
-#define HAL_I2C_MODULE_ENABLED
+/*#define HAL_RTC_MODULE_ENABLED   */
+/*#define HAL_SMARTCARD_MODULE_ENABLED   */
+/*#define HAL_SMBUS_MODULE_ENABLED   */
+/*#define HAL_SPI_MODULE_ENABLED   */
+/*#define HAL_TIM_MODULE_ENABLED   */
+/*#define HAL_TSC_MODULE_ENABLED   */
+#define HAL_UART_MODULE_ENABLED
+/*#define HAL_USART_MODULE_ENABLED   */
+/*#define HAL_WWDG_MODULE_ENABLED */
 
-/* ########################## HSE/HSI Values adaptation ##################### */
+/* ######################### Oscillator Values adaptation ################### */
 /**
   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
   *        This value is used by the RCC HAL module to compute the system frequency
   *        (when HSE is used as system clock source, directly or through the PLL).  
   */
 #if !defined  (HSE_VALUE) 
-  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+  #define HSE_VALUE            8000000U  /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
 /**
@@ -97,7 +76,7 @@
   *        Timeout value 
   */
 #if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */
+  #define HSE_STARTUP_TIMEOUT  100U      /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
@@ -106,7 +85,7 @@
   *        (when HSI is used as system clock source, directly or through the PLL). 
   */
 #if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+  #define HSI_VALUE            8000000U  /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
 /**
@@ -114,14 +93,14 @@
   *        Timeout value 
   */
 #if !defined  (HSI_STARTUP_TIMEOUT) 
- #define HSI_STARTUP_TIMEOUT   ((uint32_t)5000) /*!< Time out for HSI start up */
+  #define HSI_STARTUP_TIMEOUT  5000U     /*!< Time out for HSI start up */
 #endif /* HSI_STARTUP_TIMEOUT */  
 
 /**
   * @brief Internal High Speed oscillator for ADC (HSI14) value.
   */
 #if !defined  (HSI14_VALUE) 
-#define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz.
+  #define HSI14_VALUE          14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz.
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 #endif /* HSI14_VALUE */
@@ -130,7 +109,7 @@
   * @brief Internal High Speed oscillator for USB (HSI48) value.
   */
 #if !defined  (HSI48_VALUE) 
-#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+  #define HSI48_VALUE          48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz.
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 #endif /* HSI48_VALUE */
@@ -139,21 +118,25 @@
   * @brief Internal Low Speed oscillator (LSI) value.
   */
 #if !defined  (LSI_VALUE) 
- #define LSI_VALUE  ((uint32_t)40000)    
+  #define LSI_VALUE            32000U    
 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 /**
-  * @brief External Low Speed oscillator (LSI) value.
+  * @brief External Low Speed oscillator (LSE) value.
   */
 #if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */
+  #define LSE_VALUE            32768U    /*!< Value of the External Low Speed oscillator in Hz */
 #endif /* LSE_VALUE */     
 
+/**
+  * @brief Time out for LSE start up value in ms.
+  */
 #if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
+  #define LSE_STARTUP_TIMEOUT  5000U     /*!< Time out for LSE start up, in ms */
 #endif /* LSE_STARTUP_TIMEOUT */
 
+
 /* Tip: To avoid modifying this file each time you need to use different HSE,
    ===  you can define the HSE value in your toolchain compiler preprocessor. */
 
@@ -161,29 +144,41 @@
 /**
   * @brief This is the HAL system configuration section
   */     
-#define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */           
-#define  TICK_INT_PRIORITY            ((uint32_t)0)    /*!< tick interrupt priority (lowest by default)  */            
+#define  VDD_VALUE                    3300U  /*!< Value of VDD in mv */           
+#define  TICK_INT_PRIORITY            ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default)             */
                                                                               /*  Warning: Must be set to higher priority for HAL_Delay()  */
                                                                               /*  and HAL_GetTick() usage under interrupt context          */
-#define  USE_RTOS                     0     
-#define  PREFETCH_ENABLE              1              
-#define  INSTRUCTION_CACHE_ENABLE     0
-#define  DATA_CACHE_ENABLE            0
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+#define  INSTRUCTION_CACHE_ENABLE     0U
+#define  DATA_CACHE_ENABLE            0U
+#define  USE_SPI_CRC                  1U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_COMP_REGISTER_CALLBACKS        0U /* COMP register callback disabled      */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_TSC_REGISTER_CALLBACKS         0U /* TSC register callback disabled       */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+
 /* ########################## Assert Selection ############################## */
 /**
   * @brief Uncomment the line below to expanse the "assert_param" macro in the 
   *        HAL drivers code
   */
- #define USE_FULL_ASSERT   1U 
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     0U
+ #define USE_FULL_ASSERT   1 
 
 /* Includes ------------------------------------------------------------------*/
 /**
@@ -194,14 +189,14 @@
  #include "stm32f0xx_hal_rcc.h"
 #endif /* HAL_RCC_MODULE_ENABLED */
 
-#ifdef HAL_EXTI_MODULE_ENABLED
- #include "stm32f0xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
 #ifdef HAL_GPIO_MODULE_ENABLED
  #include "stm32f0xx_hal_gpio.h"
 #endif /* HAL_GPIO_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_DMA_MODULE_ENABLED
   #include "stm32f0xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
@@ -302,15 +297,15 @@
 #ifdef  USE_FULL_ASSERT
 /**
   * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
+  * @param  expr If expr is false, it calls assert_failed function
   *         which reports the name of the source file and the source
   *         line number of the call that failed. 
   *         If expr is true, it returns no value.
   * @retval None
   */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__))
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
 /* Exported functions ------------------------------------------------------- */
-  void assert_failed(char* file, uint32_t line);
+  void assert_failed(uint8_t* file, uint32_t line);
 #else
   #define assert_param(expr) ((void)0U)
 #endif /* USE_FULL_ASSERT */    
@@ -321,4 +316,6 @@
 
 #endif /* __STM32F0xx_HAL_CONF_H */
 
+
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

hw/bsp/stm32f072disco/stm32f072disco.c

@@ -199,7 +199,7 @@ void HardFault_Handler (void)
   * @param  line: assert_param error line source number
   * @retval None
   */
-void assert_failed(char *file, uint32_t line)
+void assert_failed(uint8_t* file, uint32_t line)
 {
   (void) file; (void) line;
   /* USER CODE BEGIN 6 */

hw/bsp/stm32f072disco/stm32f0xx_hal_conf.h

@@ -1,34 +1,18 @@
 /**
   ******************************************************************************
-  * @file    GPIO/GPIO_IOToggle/Inc/stm32f3xx_hal_conf.h
+  * @file    stm32f0xx_hal_conf.h
   * @author  MCD Application Team
   * @brief   HAL configuration file.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -50,46 +34,41 @@
   */
 #define HAL_MODULE_ENABLED  
 /*#define HAL_ADC_MODULE_ENABLED   */
-/*#define HAL_CRYP_MODULE_ENABLED   */
 /*#define HAL_CAN_MODULE_ENABLED   */
 /*#define HAL_CEC_MODULE_ENABLED   */
 /*#define HAL_COMP_MODULE_ENABLED   */
+#define HAL_CORTEX_MODULE_ENABLED
 /*#define HAL_CRC_MODULE_ENABLED   */
-/*#define HAL_CRYP_MODULE_ENABLED   */
-/*#define HAL_TSC_MODULE_ENABLED   */
 /*#define HAL_DAC_MODULE_ENABLED   */
-/*#define HAL_I2S_MODULE_ENABLED   */
-/*#define HAL_IWDG_MODULE_ENABLED   */
-/*#define HAL_LCD_MODULE_ENABLED   */
-/*#define HAL_LPTIM_MODULE_ENABLED   */
-/*#define HAL_RNG_MODULE_ENABLED   */
-/*#define HAL_RTC_MODULE_ENABLED   */
-/*#define HAL_SPI_MODULE_ENABLED   */
-/*#define HAL_TIM_MODULE_ENABLED   */
-#define HAL_UART_MODULE_ENABLED
-//#define HAL_USART_MODULE_ENABLED
-/*#define HAL_IRDA_MODULE_ENABLED   */
-/*#define HAL_SMARTCARD_MODULE_ENABLED   */
-/*#define HAL_SMBUS_MODULE_ENABLED   */
-/*#define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_PCD_MODULE_ENABLED
-/*#define HAL_EXTI_MODULE_ENABLED   */
-#define HAL_CORTEX_MODULE_ENABLED
 #define HAL_DMA_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
 #define HAL_GPIO_MODULE_ENABLED
+/*#define HAL_EXTI_MODULE_ENABLED   */
+/*#define HAL_I2C_MODULE_ENABLED */
+/*#define HAL_I2S_MODULE_ENABLED */
+/*#define HAL_IRDA_MODULE_ENABLED */
+/*#define HAL_IWDG_MODULE_ENABLED */
+#define HAL_PCD_MODULE_ENABLED
 #define HAL_PWR_MODULE_ENABLED
 #define HAL_RCC_MODULE_ENABLED
-#define HAL_I2C_MODULE_ENABLED
+/*#define HAL_RTC_MODULE_ENABLED   */
+/*#define HAL_SMARTCARD_MODULE_ENABLED   */
+/*#define HAL_SMBUS_MODULE_ENABLED   */
+/*#define HAL_SPI_MODULE_ENABLED   */
+/*#define HAL_TIM_MODULE_ENABLED   */
+/*#define HAL_TSC_MODULE_ENABLED   */
+#define HAL_UART_MODULE_ENABLED
+/*#define HAL_USART_MODULE_ENABLED   */
+/*#define HAL_WWDG_MODULE_ENABLED */
 
-/* ########################## HSE/HSI Values adaptation ##################### */
+/* ######################### Oscillator Values adaptation ################### */
 /**
   * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
   *        This value is used by the RCC HAL module to compute the system frequency
   *        (when HSE is used as system clock source, directly or through the PLL).  
   */
 #if !defined  (HSE_VALUE) 
-  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+  #define HSE_VALUE            8000000U  /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
 /**
@@ -97,7 +76,7 @@
   *        Timeout value 
   */
 #if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */
+  #define HSE_STARTUP_TIMEOUT  100U      /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
@@ -106,7 +85,7 @@
   *        (when HSI is used as system clock source, directly or through the PLL). 
   */
 #if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+  #define HSI_VALUE            8000000U  /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
 /**
@@ -114,14 +93,14 @@
   *        Timeout value 
   */
 #if !defined  (HSI_STARTUP_TIMEOUT) 
- #define HSI_STARTUP_TIMEOUT   ((uint32_t)5000) /*!< Time out for HSI start up */
+  #define HSI_STARTUP_TIMEOUT  5000U     /*!< Time out for HSI start up */
 #endif /* HSI_STARTUP_TIMEOUT */  
 
 /**
   * @brief Internal High Speed oscillator for ADC (HSI14) value.
   */
 #if !defined  (HSI14_VALUE) 
-#define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz.
+  #define HSI14_VALUE          14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz.
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 #endif /* HSI14_VALUE */
@@ -130,7 +109,7 @@
   * @brief Internal High Speed oscillator for USB (HSI48) value.
   */
 #if !defined  (HSI48_VALUE) 
-#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+  #define HSI48_VALUE          48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz.
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 #endif /* HSI48_VALUE */
@@ -139,21 +118,25 @@
   * @brief Internal Low Speed oscillator (LSI) value.
   */
 #if !defined  (LSI_VALUE) 
- #define LSI_VALUE  ((uint32_t)40000)    
+  #define LSI_VALUE            32000U    
 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
                                              The real value may vary depending on the variations
                                              in voltage and temperature.  */
 /**
-  * @brief External Low Speed oscillator (LSI) value.
+  * @brief External Low Speed oscillator (LSE) value.
   */
 #if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */
+  #define LSE_VALUE            32768U    /*!< Value of the External Low Speed oscillator in Hz */
 #endif /* LSE_VALUE */     
 
+/**
+  * @brief Time out for LSE start up value in ms.
+  */
 #if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
+  #define LSE_STARTUP_TIMEOUT  5000U     /*!< Time out for LSE start up, in ms */
 #endif /* LSE_STARTUP_TIMEOUT */
 
+
 /* Tip: To avoid modifying this file each time you need to use different HSE,
    ===  you can define the HSE value in your toolchain compiler preprocessor. */
 
@@ -161,29 +144,41 @@
 /**
   * @brief This is the HAL system configuration section
   */     
-#define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */           
-#define  TICK_INT_PRIORITY            ((uint32_t)0)    /*!< tick interrupt priority (lowest by default)  */            
+#define  VDD_VALUE                    3300U  /*!< Value of VDD in mv */           
+#define  TICK_INT_PRIORITY            ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default)             */
                                                                               /*  Warning: Must be set to higher priority for HAL_Delay()  */
                                                                               /*  and HAL_GetTick() usage under interrupt context          */
-#define  USE_RTOS                     0     
-#define  PREFETCH_ENABLE              1              
-#define  INSTRUCTION_CACHE_ENABLE     0
-#define  DATA_CACHE_ENABLE            0
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+#define  INSTRUCTION_CACHE_ENABLE     0U
+#define  DATA_CACHE_ENABLE            0U
+#define  USE_SPI_CRC                  1U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_COMP_REGISTER_CALLBACKS        0U /* COMP register callback disabled      */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_TSC_REGISTER_CALLBACKS         0U /* TSC register callback disabled       */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+
 /* ########################## Assert Selection ############################## */
 /**
   * @brief Uncomment the line below to expanse the "assert_param" macro in the 
   *        HAL drivers code
   */
- #define USE_FULL_ASSERT   1U 
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     0U
+ #define USE_FULL_ASSERT   1 
 
 /* Includes ------------------------------------------------------------------*/
 /**
@@ -194,14 +189,14 @@
  #include "stm32f0xx_hal_rcc.h"
 #endif /* HAL_RCC_MODULE_ENABLED */
 
-#ifdef HAL_EXTI_MODULE_ENABLED
- #include "stm32f0xx_hal_exti.h"
-#endif /* HAL_EXTI_MODULE_ENABLED */
-
 #ifdef HAL_GPIO_MODULE_ENABLED
  #include "stm32f0xx_hal_gpio.h"
 #endif /* HAL_GPIO_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_DMA_MODULE_ENABLED
   #include "stm32f0xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
@@ -302,15 +297,15 @@
 #ifdef  USE_FULL_ASSERT
 /**
   * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
+  * @param  expr If expr is false, it calls assert_failed function
   *         which reports the name of the source file and the source
   *         line number of the call that failed. 
   *         If expr is true, it returns no value.
   * @retval None
   */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__))
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
 /* Exported functions ------------------------------------------------------- */
-  void assert_failed(char* file, uint32_t line);
+  void assert_failed(uint8_t* file, uint32_t line);
 #else
   #define assert_param(expr) ((void)0U)
 #endif /* USE_FULL_ASSERT */    
@@ -321,4 +316,6 @@
 
 #endif /* __STM32F0xx_HAL_CONF_H */
 
+
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h

@@ -1,34 +1,18 @@
 /**
   ******************************************************************************
-  * @file    GPIO/GPIO_IOToggle/Inc/stm32f3xx_hal_conf.h
+  * @file    stm32f3xx_hal_conf.h
   * @author  MCD Application Team
   * @brief   HAL configuration file.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -49,34 +33,41 @@
   * @brief This is the list of modules to be used in the HAL driver 
   */
 #define HAL_MODULE_ENABLED  
-//#define HAL_ADC_MODULE_ENABLED  
-//#define HAL_CAN_MODULE_ENABLED
-//#define HAL_CAN_LEGACY_MODULE_ENABLED
-//#define HAL_CEC_MODULE_ENABLED 
-//#define HAL_COMP_MODULE_ENABLED
+/* #define HAL_ADC_MODULE_ENABLED */
+/* #define HAL_CAN_MODULE_ENABLED */
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
+/* #define HAL_CEC_MODULE_ENABLED */
+/* #define HAL_COMP_MODULE_ENABLED */
 #define HAL_CORTEX_MODULE_ENABLED
-#define HAL_CRC_MODULE_ENABLED
-//#define HAL_DAC_MODULE_ENABLED  
-#define HAL_DMA_MODULE_ENABLED 
+/* #define HAL_CRC_MODULE_ENABLED */
+/* #define HAL_DAC_MODULE_ENABLED */
+#define HAL_DMA_MODULE_ENABLED
 #define HAL_FLASH_MODULE_ENABLED
+/* #define HAL_SRAM_MODULE_ENABLED */
+/* #define HAL_NOR_MODULE_ENABLED */
+/* #define HAL_NAND_MODULE_ENABLED */
+/* #define HAL_PCCARD_MODULE_ENABLED */
 #define HAL_GPIO_MODULE_ENABLED
-//#define HAL_HRTIM_MODULE_ENABLED
-//#define HAL_I2C_MODULE_ENABLED
-//#define HAL_I2S_MODULE_ENABLED
-//#define HAL_IRDA_MODULE_ENABLED
-//#define HAL_IWDG_MODULE_ENABLED
-//#define HAL_OPAMP_MODULE_ENABLED
-//#define HAL_PWR_MODULE_ENABLED
+/* #define HAL_EXTI_MODULE_ENABLED */
+/* #define HAL_HRTIM_MODULE_ENABLED */
+/* #define HAL_I2C_MODULE_ENABLED */
+/* #define HAL_I2S_MODULE_ENABLED */
+/* #define HAL_IRDA_MODULE_ENABLED */
+/* #define HAL_IWDG_MODULE_ENABLED */
+/* #define HAL_OPAMP_MODULE_ENABLED */
+/* #define HAL_PCD_MODULE_ENABLED */
+/* #define HAL_PWR_MODULE_ENABLED */
 #define HAL_RCC_MODULE_ENABLED 
-//#define HAL_RTC_MODULE_ENABLED
-//#define HAL_SDADC_MODULE_ENABLED
-//#define HAL_SMARTCARD_MODULE_ENABLED
-//#define HAL_SPI_MODULE_ENABLED
-//#define HAL_TIM_MODULE_ENABLED
+/* #define HAL_RTC_MODULE_ENABLED */
+/* #define HAL_SDADC_MODULE_ENABLED */
+/* #define HAL_SMARTCARD_MODULE_ENABLED */
+/* #define HAL_SMBUS_MODULE_ENABLED */
+/* #define HAL_SPI_MODULE_ENABLED */
+/* #define HAL_TIM_MODULE_ENABLED */
+/* #define HAL_TSC_MODULE_ENABLED */
 #define HAL_UART_MODULE_ENABLED
-#define HAL_USART_MODULE_ENABLED
-//#define HAL_WWDG_MODULE_ENABLED
-//#define HAL_PPP_MODULE_ENABLED
+/* #define HAL_USART_MODULE_ENABLED */
+/* #define HAL_WWDG_MODULE_ENABLED */
 
 /* ########################## HSE/HSI Values adaptation ##################### */
 /**
@@ -161,12 +152,38 @@
 #define  DATA_CACHE_ENABLE            0U
 #define  USE_SPI_CRC                  1U
 
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_COMP_REGISTER_CALLBACKS        0U /* COMP register callback disabled      */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_SDADC_REGISTER_CALLBACKS       0U /* SDADC register callback disabled     */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_HRTIM_REGISTER_CALLBACKS       0U /* HRTIM register callback disabled     */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+#define  USE_HAL_OPAMP_REGISTER_CALLBACKS       0U /* OPAMP register callback disabled     */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_TSC_REGISTER_CALLBACKS         0U /* TSC register callback disabled       */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+
 /* ########################## Assert Selection ############################## */
 /**
   * @brief Uncomment the line below to expanse the "assert_param" macro in the
   *        HAL drivers code
   */
-/*#define USE_FULL_ASSERT    1*/
+/*#define USE_FULL_ASSERT    1U*/
 
 /* Includes ------------------------------------------------------------------*/
 /**
@@ -181,6 +198,10 @@
  #include "stm32f3xx_hal_gpio.h"
 #endif /* HAL_GPIO_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f3xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_DMA_MODULE_ENABLED
   #include "stm32f3xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
@@ -221,6 +242,22 @@
  #include "stm32f3xx_hal_flash.h"
 #endif /* HAL_FLASH_MODULE_ENABLED */
 
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f3xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f3xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f3xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+  #include "stm32f3xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */ 
+  
 #ifdef HAL_HRTIM_MODULE_ENABLED
  #include "stm32f3xx_hal_hrtim.h"
 #endif /* HAL_HRTIM_MODULE_ENABLED */
@@ -245,6 +282,10 @@
  #include "stm32f3xx_hal_opamp.h"
 #endif /* HAL_OPAMP_MODULE_ENABLED */
 
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f3xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
 #ifdef HAL_PWR_MODULE_ENABLED
  #include "stm32f3xx_hal_pwr.h"
 #endif /* HAL_PWR_MODULE_ENABLED */
@@ -261,6 +302,10 @@
  #include "stm32f3xx_hal_smartcard.h"
 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
 
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f3xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
 #ifdef HAL_SPI_MODULE_ENABLED
  #include "stm32f3xx_hal_spi.h"
 #endif /* HAL_SPI_MODULE_ENABLED */
@@ -289,15 +334,15 @@
 #ifdef  USE_FULL_ASSERT
 /**
   * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
+  * @param  expr If expr is false, it calls assert_failed function
   *         which reports the name of the source file and the source
   *         line number of the call that failed.
   *         If expr is true, it returns no value.
   * @retval None
   */
-  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__))
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
 /* Exported functions ------------------------------------------------------- */
-  void assert_failed(char* file, uint32_t line);
+  void assert_failed(uint8_t* file, uint32_t line);
 #else
   #define assert_param(expr) ((void)0U)
 #endif /* USE_FULL_ASSERT */

hw/bsp/stm32f401blackpill/stm32f4xx_hal_conf.h

@@ -1,34 +1,18 @@
 /**
   ******************************************************************************
-  * @file    GPIO/GPIO_EXTI/Inc/stm32f4xx_hal_conf.h
+  * @file    stm32f4xx_hal_conf_template.h
   * @author  MCD Application Team
   * @brief   HAL configuration file
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -53,6 +37,7 @@
 /* #define HAL_CAN_MODULE_ENABLED      */
 /* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
 /* #define HAL_CRC_MODULE_ENABLED      */ 
+/* #define HAL_CEC_MODULE_ENABLED      */ 
 /* #define HAL_CRYP_MODULE_ENABLED     */ 
 /* #define HAL_DAC_MODULE_ENABLED      */ 
 /* #define HAL_DCMI_MODULE_ENABLED     */ 
@@ -67,27 +52,35 @@
 /* #define HAL_SDRAM_MODULE_ENABLED    */
 /* #define HAL_HASH_MODULE_ENABLED     */  
 #define HAL_GPIO_MODULE_ENABLED
-// #define HAL_I2C_MODULE_ENABLED
+/* #define HAL_EXTI_MODULE_ENABLED     */
+/* #define HAL_I2C_MODULE_ENABLED      */
+/* #define HAL_SMBUS_MODULE_ENABLED    */
 /* #define HAL_I2S_MODULE_ENABLED      */
 /* #define HAL_IWDG_MODULE_ENABLED     */ 
 /* #define HAL_LTDC_MODULE_ENABLED     */
+/* #define HAL_DSI_MODULE_ENABLED      */
 #define HAL_PWR_MODULE_ENABLED
+/* #define HAL_QSPI_MODULE_ENABLED     */
 #define HAL_RCC_MODULE_ENABLED      
-/* #define HAL_RNG_MODULE_ENABLED       */   
-/* #define HAL_RTC_MODULE_ENABLED       */
-/* #define HAL_SAI_MODULE_ENABLED        */   
-/* #define HAL_SD_MODULE_ENABLED         */
+/* #define HAL_RNG_MODULE_ENABLED      */
+/* #define HAL_RTC_MODULE_ENABLED      */
+/* #define HAL_SAI_MODULE_ENABLED      */
+/* #define HAL_SD_MODULE_ENABLED       */
 // #define HAL_SPI_MODULE_ENABLED
-/* #define HAL_TIM_MODULE_ENABLED       */
-/* #define HAL_UART_MODULE_ENABLED      */
-/* #define HAL_USART_MODULE_ENABLED     */ 
-/* #define HAL_IRDA_MODULE_ENABLED      */
+/* #define HAL_TIM_MODULE_ENABLED      */
+/* #define HAL_UART_MODULE_ENABLED     */
+/* #define HAL_USART_MODULE_ENABLED    */ 
+/* #define HAL_IRDA_MODULE_ENABLED     */
 /* #define HAL_SMARTCARD_MODULE_ENABLED */
-/* #define HAL_WWDG_MODULE_ENABLED      */
+/* #define HAL_WWDG_MODULE_ENABLED     */
 #define HAL_CORTEX_MODULE_ENABLED   
 /* #define HAL_PCD_MODULE_ENABLED      */
 /* #define HAL_HCD_MODULE_ENABLED      */
-
+/* #define HAL_FMPI2C_MODULE_ENABLED   */
+/* #define HAL_SPDIFRX_MODULE_ENABLED  */
+/* #define HAL_DFSDM_MODULE_ENABLED    */
+/* #define HAL_LPTIM_MODULE_ENABLED    */
+/* #define HAL_MMC_MODULE_ENABLED      */
 
 /* ########################## HSE/HSI Values adaptation ##################### */
 /**
@@ -200,6 +193,72 @@
   */
 /* #define USE_FULL_ASSERT    1U */
 
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */   
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/ 
+#define DP83848_PHY_ADDRESS             0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
+ 
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+  
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
+#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
+#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
+ 
+#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
+
+#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
+#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
+
+#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
+#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
+
 /* ################## SPI peripheral configuration ########################## */
 
 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
@@ -222,6 +281,10 @@
   #include "stm32f4xx_hal_gpio.h"
 #endif /* HAL_GPIO_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_DMA_MODULE_ENABLED
   #include "stm32f4xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
@@ -298,6 +361,10 @@
  #include "stm32f4xx_hal_i2c.h"
 #endif /* HAL_I2C_MODULE_ENABLED */
 
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
 #ifdef HAL_I2S_MODULE_ENABLED
  #include "stm32f4xx_hal_i2s.h"
 #endif /* HAL_I2S_MODULE_ENABLED */
@@ -366,11 +433,43 @@
  #include "stm32f4xx_hal_hcd.h"
 #endif /* HAL_HCD_MODULE_ENABLED */
    
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
 /* Exported macro ------------------------------------------------------------*/
 #ifdef  USE_FULL_ASSERT
 /**
   * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
+  * @param  expr If expr is false, it calls assert_failed function
   *         which reports the name of the source file and the source
   *         line number of the call that failed. 
   *         If expr is true, it returns no value.

hw/bsp/stm32f407disco/board.mk

@@ -19,8 +19,8 @@ SRC_C += \
 	$(ST_CMSIS)/Source/Templates/system_stm32f4xx.c \
 	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal.c \
 	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_cortex.c \
-	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_uart.c \
 	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_rcc.c \
+	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_uart.c \
 	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_gpio.c
 
 SRC_S += \

hw/bsp/stm32f407disco/stm32f407disco.c

@@ -36,7 +36,6 @@
 #define BUTTON_PIN            GPIO_PIN_0
 #define BUTTON_STATE_ACTIVE   1
 
-
 // Enable PA2 as the debug log UART
 // It is not routed to the ST/Link on the Discovery board.
 #define UARTx                 USART2
@@ -114,7 +113,7 @@ void board_init(void)
   SystemClock_Config();
   all_rcc_clk_enable();
 
-#if CFG_TUSB_OS  == OPT_OS_NONE
+#if CFG_TUSB_OS == OPT_OS_NONE
   // 1ms tick timer
   SysTick_Config(SystemCoreClock / 1000);
 #elif CFG_TUSB_OS == OPT_OS_FREERTOS

hw/bsp/stm32f407disco/stm32f4xx_hal_conf.h

@@ -1,34 +1,18 @@
 /**
   ******************************************************************************
-  * @file    GPIO/GPIO_EXTI/Inc/stm32f4xx_hal_conf.h
+  * @file    stm32f4xx_hal_conf_template.h
   * @author  MCD Application Team
   * @brief   HAL configuration file
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -53,6 +37,7 @@
 /* #define HAL_CAN_MODULE_ENABLED      */
 /* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
 /* #define HAL_CRC_MODULE_ENABLED      */ 
+/* #define HAL_CEC_MODULE_ENABLED      */ 
 /* #define HAL_CRYP_MODULE_ENABLED     */ 
 /* #define HAL_DAC_MODULE_ENABLED      */ 
 /* #define HAL_DCMI_MODULE_ENABLED     */ 
@@ -67,27 +52,35 @@
 /* #define HAL_SDRAM_MODULE_ENABLED    */
 /* #define HAL_HASH_MODULE_ENABLED     */  
 #define HAL_GPIO_MODULE_ENABLED
-// #define HAL_I2C_MODULE_ENABLED
+/* #define HAL_EXTI_MODULE_ENABLED     */
+/* #define HAL_I2C_MODULE_ENABLED      */
+/* #define HAL_SMBUS_MODULE_ENABLED    */
 /* #define HAL_I2S_MODULE_ENABLED      */
 /* #define HAL_IWDG_MODULE_ENABLED     */ 
 /* #define HAL_LTDC_MODULE_ENABLED     */
+/* #define HAL_DSI_MODULE_ENABLED      */
 #define HAL_PWR_MODULE_ENABLED
+/* #define HAL_QSPI_MODULE_ENABLED     */
 #define HAL_RCC_MODULE_ENABLED      
-/* #define HAL_RNG_MODULE_ENABLED       */   
-/* #define HAL_RTC_MODULE_ENABLED       */
-/* #define HAL_SAI_MODULE_ENABLED        */   
-/* #define HAL_SD_MODULE_ENABLED         */
+/* #define HAL_RNG_MODULE_ENABLED      */
+/* #define HAL_RTC_MODULE_ENABLED      */
+/* #define HAL_SAI_MODULE_ENABLED      */
+/* #define HAL_SD_MODULE_ENABLED       */
 // #define HAL_SPI_MODULE_ENABLED
-/* #define HAL_TIM_MODULE_ENABLED       */
+/* #define HAL_TIM_MODULE_ENABLED      */
 #define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED     */ 
-/* #define HAL_IRDA_MODULE_ENABLED      */
+/* #define HAL_USART_MODULE_ENABLED    */ 
+/* #define HAL_IRDA_MODULE_ENABLED     */
 /* #define HAL_SMARTCARD_MODULE_ENABLED */
-/* #define HAL_WWDG_MODULE_ENABLED      */
+/* #define HAL_WWDG_MODULE_ENABLED     */
 #define HAL_CORTEX_MODULE_ENABLED   
 /* #define HAL_PCD_MODULE_ENABLED      */
 /* #define HAL_HCD_MODULE_ENABLED      */
-
+/* #define HAL_FMPI2C_MODULE_ENABLED   */
+/* #define HAL_SPDIFRX_MODULE_ENABLED  */
+/* #define HAL_DFSDM_MODULE_ENABLED    */
+/* #define HAL_LPTIM_MODULE_ENABLED    */
+/* #define HAL_MMC_MODULE_ENABLED      */
 
 /* ########################## HSE/HSI Values adaptation ##################### */
 /**
@@ -200,6 +193,72 @@
   */
 /* #define USE_FULL_ASSERT    1U */
 
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */   
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/ 
+#define DP83848_PHY_ADDRESS             0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
+ 
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+  
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
+#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
+#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
+ 
+#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
+
+#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
+#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
+
+#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
+#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
+
 /* ################## SPI peripheral configuration ########################## */
 
 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
@@ -222,6 +281,10 @@
   #include "stm32f4xx_hal_gpio.h"
 #endif /* HAL_GPIO_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_DMA_MODULE_ENABLED
   #include "stm32f4xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
@@ -298,6 +361,10 @@
  #include "stm32f4xx_hal_i2c.h"
 #endif /* HAL_I2C_MODULE_ENABLED */
 
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
 #ifdef HAL_I2S_MODULE_ENABLED
  #include "stm32f4xx_hal_i2s.h"
 #endif /* HAL_I2S_MODULE_ENABLED */
@@ -366,11 +433,43 @@
  #include "stm32f4xx_hal_hcd.h"
 #endif /* HAL_HCD_MODULE_ENABLED */
    
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
 /* Exported macro ------------------------------------------------------------*/
 #ifdef  USE_FULL_ASSERT
 /**
   * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
+  * @param  expr If expr is false, it calls assert_failed function
   *         which reports the name of the source file and the source
   *         line number of the call that failed. 
   *         If expr is true, it returns no value.

hw/bsp/stm32f411blackpill/stm32f4xx_hal_conf.h

@@ -1,34 +1,18 @@
 /**
   ******************************************************************************
-  * @file    GPIO/GPIO_EXTI/Inc/stm32f4xx_hal_conf.h
+  * @file    stm32f4xx_hal_conf_template.h
   * @author  MCD Application Team
   * @brief   HAL configuration file
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -53,6 +37,7 @@
 /* #define HAL_CAN_MODULE_ENABLED      */
 /* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
 /* #define HAL_CRC_MODULE_ENABLED      */ 
+/* #define HAL_CEC_MODULE_ENABLED      */ 
 /* #define HAL_CRYP_MODULE_ENABLED     */ 
 /* #define HAL_DAC_MODULE_ENABLED      */ 
 /* #define HAL_DCMI_MODULE_ENABLED     */ 
@@ -67,27 +52,35 @@
 /* #define HAL_SDRAM_MODULE_ENABLED    */
 /* #define HAL_HASH_MODULE_ENABLED     */  
 #define HAL_GPIO_MODULE_ENABLED
-// #define HAL_I2C_MODULE_ENABLED
+/* #define HAL_EXTI_MODULE_ENABLED     */
+/* #define HAL_I2C_MODULE_ENABLED      */
+/* #define HAL_SMBUS_MODULE_ENABLED    */
 /* #define HAL_I2S_MODULE_ENABLED      */
 /* #define HAL_IWDG_MODULE_ENABLED     */ 
 /* #define HAL_LTDC_MODULE_ENABLED     */
+/* #define HAL_DSI_MODULE_ENABLED      */
 #define HAL_PWR_MODULE_ENABLED
+/* #define HAL_QSPI_MODULE_ENABLED     */
 #define HAL_RCC_MODULE_ENABLED      
-/* #define HAL_RNG_MODULE_ENABLED       */   
-/* #define HAL_RTC_MODULE_ENABLED       */
-/* #define HAL_SAI_MODULE_ENABLED        */   
-/* #define HAL_SD_MODULE_ENABLED         */
+/* #define HAL_RNG_MODULE_ENABLED      */
+/* #define HAL_RTC_MODULE_ENABLED      */
+/* #define HAL_SAI_MODULE_ENABLED      */
+/* #define HAL_SD_MODULE_ENABLED       */
 // #define HAL_SPI_MODULE_ENABLED
-/* #define HAL_TIM_MODULE_ENABLED       */
-/* #define HAL_UART_MODULE_ENABLED      */
-/* #define HAL_USART_MODULE_ENABLED     */ 
-/* #define HAL_IRDA_MODULE_ENABLED      */
+/* #define HAL_TIM_MODULE_ENABLED      */
+/* #define HAL_UART_MODULE_ENABLED     */
+/* #define HAL_USART_MODULE_ENABLED    */ 
+/* #define HAL_IRDA_MODULE_ENABLED     */
 /* #define HAL_SMARTCARD_MODULE_ENABLED */
-/* #define HAL_WWDG_MODULE_ENABLED      */
+/* #define HAL_WWDG_MODULE_ENABLED     */
 #define HAL_CORTEX_MODULE_ENABLED   
 /* #define HAL_PCD_MODULE_ENABLED      */
 /* #define HAL_HCD_MODULE_ENABLED      */
-
+/* #define HAL_FMPI2C_MODULE_ENABLED   */
+/* #define HAL_SPDIFRX_MODULE_ENABLED  */
+/* #define HAL_DFSDM_MODULE_ENABLED    */
+/* #define HAL_LPTIM_MODULE_ENABLED    */
+/* #define HAL_MMC_MODULE_ENABLED      */
 
 /* ########################## HSE/HSI Values adaptation ##################### */
 /**
@@ -200,6 +193,72 @@
   */
 /* #define USE_FULL_ASSERT    1U */
 
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */   
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/ 
+#define DP83848_PHY_ADDRESS             0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
+ 
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+  
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
+#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
+#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
+ 
+#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
+
+#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
+#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
+
+#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
+#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
+
 /* ################## SPI peripheral configuration ########################## */
 
 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
@@ -222,6 +281,10 @@
   #include "stm32f4xx_hal_gpio.h"
 #endif /* HAL_GPIO_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_DMA_MODULE_ENABLED
   #include "stm32f4xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
@@ -298,6 +361,10 @@
  #include "stm32f4xx_hal_i2c.h"
 #endif /* HAL_I2C_MODULE_ENABLED */
 
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
 #ifdef HAL_I2S_MODULE_ENABLED
  #include "stm32f4xx_hal_i2s.h"
 #endif /* HAL_I2S_MODULE_ENABLED */
@@ -366,11 +433,43 @@
  #include "stm32f4xx_hal_hcd.h"
 #endif /* HAL_HCD_MODULE_ENABLED */
    
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
 /* Exported macro ------------------------------------------------------------*/
 #ifdef  USE_FULL_ASSERT
 /**
   * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
+  * @param  expr If expr is false, it calls assert_failed function
   *         which reports the name of the source file and the source
   *         line number of the call that failed. 
   *         If expr is true, it returns no value.

hw/bsp/stm32f411disco/board.mk

@@ -20,6 +20,7 @@ SRC_C += \
 	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal.c \
 	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_cortex.c \
 	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_rcc.c \
+	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_uart.c \
 	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_gpio.c
 
 SRC_S += \

hw/bsp/stm32f411disco/stm32f411disco.c

@@ -28,6 +28,7 @@
 
 #include "stm32f4xx_hal.h"
 
+// Orange LED
 #define LED_PORT              GPIOD
 #define LED_PIN               GPIO_PIN_13
 #define LED_STATE_ON          1
@@ -36,11 +37,21 @@
 #define BUTTON_PIN            GPIO_PIN_0
 #define BUTTON_STATE_ACTIVE   1
 
+// Enable PA2 as the debug log UART
+#define UARTx                 USART2
+#define UART_GPIO_PORT        GPIOA
+#define UART_GPIO_AF          GPIO_AF7_USART2
+#define UART_TX_PIN           GPIO_PIN_2
+#define UART_RX_PIN           GPIO_PIN_3
+
+UART_HandleTypeDef UartHandle;
+
 // enable all LED, Button, Uart, USB clock
 static void all_rcc_clk_enable(void)
 {
   __HAL_RCC_GPIOA_CLK_ENABLE();  // USB D+, D-, Button
   __HAL_RCC_GPIOD_CLK_ENABLE();  // LED
+  __HAL_RCC_USART2_CLK_ENABLE(); // Uart module
 }
 
 /**
@@ -151,6 +162,25 @@ void board_init(void)
   GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
   HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
+  GPIO_InitStruct.Pin       = UART_TX_PIN | UART_RX_PIN;
+  GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull      = GPIO_PULLUP;
+  GPIO_InitStruct.Speed     = GPIO_SPEED_FREQ_HIGH;
+  GPIO_InitStruct.Alternate = UART_GPIO_AF;
+  HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct);
+
+  UartHandle = (UART_HandleTypeDef){
+    .Instance        = UARTx,
+    .Init.BaudRate   = CFG_BOARD_UART_BAUDRATE,
+    .Init.WordLength = UART_WORDLENGTH_8B,
+    .Init.StopBits   = UART_STOPBITS_1,
+    .Init.Parity     = UART_PARITY_NONE,
+    .Init.HwFlowCtl  = UART_HWCONTROL_NONE,
+    .Init.Mode       = UART_MODE_TX_RX,
+    .Init.OverSampling = UART_OVERSAMPLING_16
+  };
+  HAL_UART_Init(&UartHandle);
+
   // Enable USB OTG clock
   __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
 
@@ -181,8 +211,8 @@ int board_uart_read(uint8_t* buf, int len)
 
 int board_uart_write(void const * buf, int len)
 {
-  (void) buf; (void) len;
-  return 0;
+  HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff);
+  return len;
 }
 
 #if CFG_TUSB_OS  == OPT_OS_NONE

hw/bsp/stm32f411disco/stm32f4xx_hal_conf.h

@@ -1,34 +1,18 @@
 /**
   ******************************************************************************
-  * @file    GPIO/GPIO_EXTI/Inc/stm32f4xx_hal_conf.h
+  * @file    stm32f4xx_hal_conf_template.h
   * @author  MCD Application Team
   * @brief   HAL configuration file
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -53,6 +37,7 @@
 /* #define HAL_CAN_MODULE_ENABLED      */
 /* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
 /* #define HAL_CRC_MODULE_ENABLED      */ 
+/* #define HAL_CEC_MODULE_ENABLED      */ 
 /* #define HAL_CRYP_MODULE_ENABLED     */ 
 /* #define HAL_DAC_MODULE_ENABLED      */ 
 /* #define HAL_DCMI_MODULE_ENABLED     */ 
@@ -67,27 +52,35 @@
 /* #define HAL_SDRAM_MODULE_ENABLED    */
 /* #define HAL_HASH_MODULE_ENABLED     */  
 #define HAL_GPIO_MODULE_ENABLED
-// #define HAL_I2C_MODULE_ENABLED
+/* #define HAL_EXTI_MODULE_ENABLED     */
+/* #define HAL_I2C_MODULE_ENABLED      */
+/* #define HAL_SMBUS_MODULE_ENABLED    */
 /* #define HAL_I2S_MODULE_ENABLED      */
 /* #define HAL_IWDG_MODULE_ENABLED     */ 
 /* #define HAL_LTDC_MODULE_ENABLED     */
+/* #define HAL_DSI_MODULE_ENABLED      */
 #define HAL_PWR_MODULE_ENABLED
+/* #define HAL_QSPI_MODULE_ENABLED     */
 #define HAL_RCC_MODULE_ENABLED      
-/* #define HAL_RNG_MODULE_ENABLED       */   
-/* #define HAL_RTC_MODULE_ENABLED       */
-/* #define HAL_SAI_MODULE_ENABLED        */   
-/* #define HAL_SD_MODULE_ENABLED         */
+/* #define HAL_RNG_MODULE_ENABLED      */
+/* #define HAL_RTC_MODULE_ENABLED      */
+/* #define HAL_SAI_MODULE_ENABLED      */
+/* #define HAL_SD_MODULE_ENABLED       */
 // #define HAL_SPI_MODULE_ENABLED
-/* #define HAL_TIM_MODULE_ENABLED       */
-/* #define HAL_UART_MODULE_ENABLED      */
-/* #define HAL_USART_MODULE_ENABLED     */ 
-/* #define HAL_IRDA_MODULE_ENABLED      */
+/* #define HAL_TIM_MODULE_ENABLED      */
+#define HAL_UART_MODULE_ENABLED
+/* #define HAL_USART_MODULE_ENABLED    */ 
+/* #define HAL_IRDA_MODULE_ENABLED     */
 /* #define HAL_SMARTCARD_MODULE_ENABLED */
-/* #define HAL_WWDG_MODULE_ENABLED      */
+/* #define HAL_WWDG_MODULE_ENABLED     */
 #define HAL_CORTEX_MODULE_ENABLED   
 /* #define HAL_PCD_MODULE_ENABLED      */
 /* #define HAL_HCD_MODULE_ENABLED      */
-
+/* #define HAL_FMPI2C_MODULE_ENABLED   */
+/* #define HAL_SPDIFRX_MODULE_ENABLED  */
+/* #define HAL_DFSDM_MODULE_ENABLED    */
+/* #define HAL_LPTIM_MODULE_ENABLED    */
+/* #define HAL_MMC_MODULE_ENABLED      */
 
 /* ########################## HSE/HSI Values adaptation ##################### */
 /**
@@ -200,6 +193,72 @@
   */
 /* #define USE_FULL_ASSERT    1U */
 
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */   
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/ 
+#define DP83848_PHY_ADDRESS             0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
+ 
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+  
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
+#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
+#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
+ 
+#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
+
+#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
+#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
+
+#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
+#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
+
 /* ################## SPI peripheral configuration ########################## */
 
 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
@@ -222,6 +281,10 @@
   #include "stm32f4xx_hal_gpio.h"
 #endif /* HAL_GPIO_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_DMA_MODULE_ENABLED
   #include "stm32f4xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
@@ -298,6 +361,10 @@
  #include "stm32f4xx_hal_i2c.h"
 #endif /* HAL_I2C_MODULE_ENABLED */
 
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
 #ifdef HAL_I2S_MODULE_ENABLED
  #include "stm32f4xx_hal_i2s.h"
 #endif /* HAL_I2S_MODULE_ENABLED */
@@ -366,11 +433,43 @@
  #include "stm32f4xx_hal_hcd.h"
 #endif /* HAL_HCD_MODULE_ENABLED */
    
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
 /* Exported macro ------------------------------------------------------------*/
 #ifdef  USE_FULL_ASSERT
 /**
   * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
+  * @param  expr If expr is false, it calls assert_failed function
   *         which reports the name of the source file and the source
   *         line number of the call that failed. 
   *         If expr is true, it returns no value.

hw/bsp/stm32f412disco/board.mk

@@ -24,6 +24,7 @@ SRC_C += \
 	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_cortex.c \
 	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_rcc.c \
 	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_rcc_ex.c \
+	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_uart.c \
 	$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_gpio.c
 
 SRC_S += \

hw/bsp/stm32f412disco/stm32f412disco.c

@@ -26,24 +26,31 @@
 
 #include "../board.h"
 
-#include "stm32f4xx.h"
-#include "stm32f4xx_hal_conf.h"
+#include "stm32f4xx_hal.h"
 
 #define LED_PORT              GPIOE
 #define LED_PIN               GPIO_PIN_2
 #define LED_STATE_ON          0
 
-// Joystick selection
 #define BUTTON_PORT           GPIOA
 #define BUTTON_PIN            GPIO_PIN_0
 #define BUTTON_STATE_ACTIVE   1
 
+// Enable PA2 as the debug log UART
+#define UARTx                 USART2
+#define UART_GPIO_PORT        GPIOA
+#define UART_GPIO_AF          GPIO_AF7_USART2
+#define UART_TX_PIN           GPIO_PIN_2
+#define UART_RX_PIN           GPIO_PIN_3
+
+UART_HandleTypeDef UartHandle;
 
 // enable all LED, Button, Uart, USB clock
 static void all_rcc_clk_enable(void)
 {
   __HAL_RCC_GPIOA_CLK_ENABLE();  // USB D+, D-, Button
   __HAL_RCC_GPIOE_CLK_ENABLE();  // LED
+  __HAL_RCC_USART2_CLK_ENABLE(); // Uart module
 }
 
 /**
@@ -104,6 +111,8 @@ static void SystemClock_Config(void)
   PeriphClkInitStruct.PLLI2S.PLLI2SN = 192;
   PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CK48;
   PeriphClkInitStruct.Clk48ClockSelection = RCC_CK48CLKSOURCE_PLLI2SQ;
+  PeriphClkInitStruct.PLLI2SSelection = RCC_PLLI2SCLKSOURCE_PLLSRC;
+  PeriphClkInitStruct.PLLI2S.PLLI2SR = 7;
   HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
 
   /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
@@ -118,7 +127,6 @@ static void SystemClock_Config(void)
   HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3);
 }
 
-
 void board_init(void)
 {
   SystemClock_Config();
@@ -179,6 +187,24 @@ void board_init(void)
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
   HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
+  GPIO_InitStruct.Pin       = UART_TX_PIN | UART_RX_PIN;
+  GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull      = GPIO_PULLUP;
+  GPIO_InitStruct.Speed     = GPIO_SPEED_FREQ_HIGH;
+  GPIO_InitStruct.Alternate = UART_GPIO_AF;
+  HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct);
+
+  UartHandle = (UART_HandleTypeDef){
+    .Instance        = UARTx,
+    .Init.BaudRate   = CFG_BOARD_UART_BAUDRATE,
+    .Init.WordLength = UART_WORDLENGTH_8B,
+    .Init.StopBits   = UART_STOPBITS_1,
+    .Init.Parity     = UART_PARITY_NONE,
+    .Init.HwFlowCtl  = UART_HWCONTROL_NONE,
+    .Init.Mode       = UART_MODE_TX_RX,
+    .Init.OverSampling = UART_OVERSAMPLING_16
+  };
+  HAL_UART_Init(&UartHandle);
 
   // Enable USB OTG clock
   __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
@@ -209,8 +235,8 @@ int board_uart_read(uint8_t* buf, int len)
 
 int board_uart_write(void const * buf, int len)
 {
-  (void) buf; (void) len;
-  return 0;
+  HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff);
+  return len;
 }
 
 #if CFG_TUSB_OS  == OPT_OS_NONE

hw/bsp/stm32f412disco/stm32f4xx_hal_conf.h

@@ -1,34 +1,18 @@
 /**
   ******************************************************************************
-  * @file    GPIO/GPIO_EXTI/Inc/stm32f4xx_hal_conf.h
+  * @file    stm32f4xx_hal_conf_template.h
   * @author  MCD Application Team
   * @brief   HAL configuration file
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 
@@ -53,6 +37,7 @@
 /* #define HAL_CAN_MODULE_ENABLED      */
 /* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
 /* #define HAL_CRC_MODULE_ENABLED      */ 
+/* #define HAL_CEC_MODULE_ENABLED      */ 
 /* #define HAL_CRYP_MODULE_ENABLED     */ 
 /* #define HAL_DAC_MODULE_ENABLED      */ 
 /* #define HAL_DCMI_MODULE_ENABLED     */ 
@@ -67,27 +52,35 @@
 /* #define HAL_SDRAM_MODULE_ENABLED    */
 /* #define HAL_HASH_MODULE_ENABLED     */  
 #define HAL_GPIO_MODULE_ENABLED
-// #define HAL_I2C_MODULE_ENABLED
+/* #define HAL_EXTI_MODULE_ENABLED     */
+/* #define HAL_I2C_MODULE_ENABLED      */
+/* #define HAL_SMBUS_MODULE_ENABLED    */
 /* #define HAL_I2S_MODULE_ENABLED      */
 /* #define HAL_IWDG_MODULE_ENABLED     */ 
 /* #define HAL_LTDC_MODULE_ENABLED     */
+/* #define HAL_DSI_MODULE_ENABLED      */
 #define HAL_PWR_MODULE_ENABLED
+/* #define HAL_QSPI_MODULE_ENABLED     */
 #define HAL_RCC_MODULE_ENABLED      
-/* #define HAL_RNG_MODULE_ENABLED       */   
-/* #define HAL_RTC_MODULE_ENABLED       */
-/* #define HAL_SAI_MODULE_ENABLED        */   
-/* #define HAL_SD_MODULE_ENABLED         */
+/* #define HAL_RNG_MODULE_ENABLED      */
+/* #define HAL_RTC_MODULE_ENABLED      */
+/* #define HAL_SAI_MODULE_ENABLED      */
+/* #define HAL_SD_MODULE_ENABLED       */
 // #define HAL_SPI_MODULE_ENABLED
-/* #define HAL_TIM_MODULE_ENABLED       */
-/* #define HAL_UART_MODULE_ENABLED      */
-/* #define HAL_USART_MODULE_ENABLED     */ 
-/* #define HAL_IRDA_MODULE_ENABLED      */
+/* #define HAL_TIM_MODULE_ENABLED      */
+#define HAL_UART_MODULE_ENABLED
+/* #define HAL_USART_MODULE_ENABLED    */ 
+/* #define HAL_IRDA_MODULE_ENABLED     */
 /* #define HAL_SMARTCARD_MODULE_ENABLED */
-/* #define HAL_WWDG_MODULE_ENABLED      */
+/* #define HAL_WWDG_MODULE_ENABLED     */
 #define HAL_CORTEX_MODULE_ENABLED   
 /* #define HAL_PCD_MODULE_ENABLED      */
 /* #define HAL_HCD_MODULE_ENABLED      */
-
+/* #define HAL_FMPI2C_MODULE_ENABLED   */
+/* #define HAL_SPDIFRX_MODULE_ENABLED  */
+/* #define HAL_DFSDM_MODULE_ENABLED    */
+/* #define HAL_LPTIM_MODULE_ENABLED    */
+/* #define HAL_MMC_MODULE_ENABLED      */
 
 /* ########################## HSE/HSI Values adaptation ##################### */
 /**
@@ -200,6 +193,72 @@
   */
 /* #define USE_FULL_ASSERT    1U */
 
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */   
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    4U                  /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U                  /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/ 
+#define DP83848_PHY_ADDRESS             0x01U
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
+ 
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+  
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x0010)  /*!< PHY status register Offset                      */
+#define PHY_MICR                        ((uint16_t)0x0011)  /*!< MII Interrupt Control Register                  */
+#define PHY_MISR                        ((uint16_t)0x0012)  /*!< MII Interrupt Status and Misc. Control Register */
+ 
+#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
+
+#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
+#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
+
+#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
+#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
+
 /* ################## SPI peripheral configuration ########################## */
 
 /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
@@ -222,6 +281,10 @@
   #include "stm32f4xx_hal_gpio.h"
 #endif /* HAL_GPIO_MODULE_ENABLED */
 
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
 #ifdef HAL_DMA_MODULE_ENABLED
   #include "stm32f4xx_hal_dma.h"
 #endif /* HAL_DMA_MODULE_ENABLED */
@@ -298,6 +361,10 @@
  #include "stm32f4xx_hal_i2c.h"
 #endif /* HAL_I2C_MODULE_ENABLED */
 
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
 #ifdef HAL_I2S_MODULE_ENABLED
  #include "stm32f4xx_hal_i2s.h"
 #endif /* HAL_I2S_MODULE_ENABLED */
@@ -366,11 +433,43 @@
  #include "stm32f4xx_hal_hcd.h"
 #endif /* HAL_HCD_MODULE_ENABLED */
    
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
 /* Exported macro ------------------------------------------------------------*/
 #ifdef  USE_FULL_ASSERT
 /**
   * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
+  * @param  expr If expr is false, it calls assert_failed function
   *         which reports the name of the source file and the source
   *         line number of the call that failed. 
   *         If expr is true, it returns no value.

hw/mcu/st/st_driver

@@ -1 +1 @@
-Subproject commit 3fc2e0f3db155b33177bb0705e0dd65cadb58412
+Subproject commit ceb49a6f2d4afbf88ed29de94bb86095f41761ac