revert CFG_TUSB_RHPORT0_MODE to previous way

examples/device/cdc_msc/src/tusb_config.h

@@ -56,7 +56,14 @@
 #endif
 
 // Device mode with rhport and speed defined by board.mk
-#define CFG_TUSB_RHPORT0_MODE     ((OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) << (8*BOARD_DEVICE_RHPORT_NUM))
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#else
+  #error "Incorrect RHPort configuration"
+#endif
+
 #define CFG_TUSB_OS               OPT_OS_NONE
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build

hw/bsp/stm32h743eval/stm32h743eval.c

@@ -262,9 +262,8 @@ void board_init(void)
 
   // Enable VBUS sense (B device) via pin PA9
   USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN;
-#endif
 
-#if BOARD_DEVICE_RHPORT_NUM == 1
+#elif BOARD_DEVICE_RHPORT_NUM == 1
 
   // Despite being call USB2_OTG
   // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port

src/tusb_option.h

@@ -117,10 +117,7 @@
 
 //--------------------------------------------------------------------
 // RootHub Mode Configuration
-//
-// Each byte of the CFG_TUSB_RHPORTx_MODE contains operation mode for
-// a roothub port (device or host). Therefore each macro can have up to
-// 4 ports.
+// CFG_TUSB_RHPORTx_MODE contains operation mode and speed for that port
 //--------------------------------------------------------------------
 
 // Lower 4-bit is operational mode
@@ -138,27 +135,31 @@
   #define CFG_TUSB_RHPORT0_MODE OPT_MODE_NONE
 #endif
 
-#if ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST  ) && (CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST   << 8)) ) || \
-    ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) && (CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)) )
+
+#ifndef CFG_TUSB_RHPORT1_MODE
+  #define CFG_TUSB_RHPORT1_MODE OPT_MODE_NONE
+#endif
+
+#if ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST  ) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST  )) || \
+    ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE))
   #error "TinyUSB currently does not support same modes on more than 1 roothub port"
 #endif
 
 // Which roothub port is configured as host
-#define TUH_OPT_RHPORT          ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) ? 0 : ((CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8)) ? 1 : -1) )
+#define TUH_OPT_RHPORT          ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) ? 0 : ((CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST) ? 1 : -1) )
 #define TUSB_OPT_HOST_ENABLED   ( TUH_OPT_RHPORT >= 0 )
 
 // Which roothub port is configured as device
-#define TUD_OPT_RHPORT          ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) ? 0 : ((CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)) ? 1 : -1) )
+#define TUD_OPT_RHPORT          ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) ? 0 : ((CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) ? 1 : -1) )
 
 #if TUD_OPT_RHPORT == 0
-  #define TUD_OPT_HIGH_SPEED    ( CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED )
+#define TUD_OPT_HIGH_SPEED      ( CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED )
 #else
-  #define TUD_OPT_HIGH_SPEED    ( CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HIGH_SPEED << 8) )
+#define TUD_OPT_HIGH_SPEED      ( CFG_TUSB_RHPORT1_MODE & OPT_MODE_HIGH_SPEED )
 #endif
 
 #define TUSB_OPT_DEVICE_ENABLED ( TUD_OPT_RHPORT >= 0 )
 
-
 //--------------------------------------------------------------------+
 // COMMON OPTIONS
 //--------------------------------------------------------------------+