rename startup* folder to toolchain folder

mcu/lpc11uxx/iar/startup_lpc11xx.s

@@ -0,0 +1,196 @@
+/**************************************************
+ *
+ * Part one of the system initialization code, contains low-level
+ * initialization, plain thumb variant.
+ *
+ * Copyright 2009 IAR Systems. All rights reserved.
+ *
+ * $Revision: 47021 $
+ *
+ **************************************************/
+
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+				MODULE  ?cstartup
+
+				;; Forward declaration of sections.
+				SECTION CSTACK:DATA:NOROOT(3)
+
+				SECTION .intvec:CODE:NOROOT(2)
+
+				EXTERN  __iar_program_start
+
+				PUBLIC  __vector_table
+				PUBLIC  __vector_table_0x1c
+				DATA
+__vector_table
+				DCD     sfe(CSTACK)                 ; Top of Stack
+				DCD     __iar_program_start         ; Reset Handler
+				DCD     NMI_Handler                 ; NMI Handler
+				DCD     HardFault_Handler           ; Hard Fault Handler
+				DCD     MemManage_Handler           ; MPU Fault Handler
+				DCD     BusFault_Handler            ; Bus Fault Handler
+				DCD     UsageFault_Handler          ; Usage Fault Handler
+__vector_table_0x1c
+				DCD     0                           ; Reserved
+				DCD     0                           ; Reserved
+				DCD     0                           ; Reserved
+				DCD     0                           ; Reserved
+				DCD     SVC_Handler                 ; SVCall Handler
+				DCD     DebugMon_Handler            ; Debug Monitor Handler
+				DCD     0                           ; Reserved
+				DCD     PendSV_Handler              ; PendSV Ha dler
+				DCD     SysTick_Handler             ; SysTick Handler
+				; External Interrupts
+				DCD     FLEX_INT0_IRQHandler        ; All GPIO pin can be routed to FLEX_INTx
+				DCD     FLEX_INT1_IRQHandler          
+				DCD     FLEX_INT2_IRQHandler                       
+				DCD     FLEX_INT3_IRQHandler                         
+				DCD     FLEX_INT4_IRQHandler                        
+				DCD     FLEX_INT5_IRQHandler
+				DCD     FLEX_INT6_IRQHandler
+				DCD     FLEX_INT7_IRQHandler                       
+				DCD     GINT0_IRQHandler                         
+				DCD     GINT1_IRQHandler            ; PIO0 (0:7)              
+				DCD     Reserved_IRQHandler         ; Reserved
+				DCD     Reserved_IRQHandler
+				DCD     Reserved_IRQHandler       
+				DCD     Reserved_IRQHandler                       
+				DCD     SSP1_IRQHandler             ; SSP1               
+				DCD     I2C_IRQHandler              ; I2C
+				DCD     TIMER16_0_IRQHandler        ; 16-bit Timer0
+				DCD     TIMER16_1_IRQHandler        ; 16-bit Timer1
+				DCD     TIMER32_0_IRQHandler        ; 32-bit Timer0
+				DCD     TIMER32_1_IRQHandler        ; 32-bit Timer1
+				DCD     SSP0_IRQHandler             ; SSP0
+				DCD     UART_IRQHandler             ; UART
+				DCD     USB_IRQHandler              ; USB IRQ
+				DCD     USB_FIQHandler              ; USB FIQ
+				DCD     ADC_IRQHandler              ; A/D Converter
+				DCD     WDT_IRQHandler              ; Watchdog timer
+				DCD     BOD_IRQHandler              ; Brown Out Detect
+				DCD     FMC_IRQHandler              ; IP2111 Flash Memory Controller
+				DCD     Reserved_IRQHandler         ; Reserved
+				DCD     Reserved_IRQHandler         ; Reserved
+				DCD     USBWakeup_IRQHandler        ; USB wake up
+				DCD     Reserved_IRQHandler         ; Reserved
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+        SECTION .text:CODE:REORDER:NOROOT(1)
+        PUBWEAK NMI_Handler
+        PUBWEAK HardFault_Handler
+        PUBWEAK MemManage_Handler
+        PUBWEAK BusFault_Handler
+        PUBWEAK UsageFault_Handler
+        PUBWEAK SVC_Handler
+        PUBWEAK DebugMon_Handler
+        PUBWEAK PendSV_Handler
+        PUBWEAK SysTick_Handler
+        PUBWEAK FLEX_INT0_IRQHandler
+        PUBWEAK FLEX_INT1_IRQHandler
+        PUBWEAK FLEX_INT2_IRQHandler
+        PUBWEAK FLEX_INT3_IRQHandler
+        PUBWEAK FLEX_INT4_IRQHandler
+        PUBWEAK FLEX_INT5_IRQHandler
+        PUBWEAK FLEX_INT6_IRQHandler
+        PUBWEAK FLEX_INT7_IRQHandler
+        PUBWEAK GINT0_IRQHandler
+        PUBWEAK GINT1_IRQHandler
+        PUBWEAK SSP1_IRQHandler
+        PUBWEAK I2C_IRQHandler
+        PUBWEAK TIMER16_0_IRQHandler
+        PUBWEAK TIMER16_1_IRQHandler
+        PUBWEAK TIMER32_0_IRQHandler
+        PUBWEAK TIMER32_1_IRQHandler
+        PUBWEAK SSP0_IRQHandler
+        PUBWEAK UART_IRQHandler
+        PUBWEAK USB_IRQHandler
+        PUBWEAK USB_FIQHandler
+        PUBWEAK ADC_IRQHandler
+        PUBWEAK WDT_IRQHandler
+        PUBWEAK BOD_IRQHandler
+        PUBWEAK FMC_IRQHandler
+        PUBWEAK USBWakeup_IRQHandler
+        PUBWEAK Reserved_IRQHandler
+
+NMI_Handler
+HardFault_Handler
+MemManage_Handler
+BusFault_Handler
+UsageFault_Handler
+SVC_Handler
+DebugMon_Handler
+PendSV_Handler
+SysTick_Handler
+FLEX_INT0_IRQHandler
+FLEX_INT1_IRQHandler
+FLEX_INT2_IRQHandler
+FLEX_INT3_IRQHandler
+FLEX_INT4_IRQHandler
+FLEX_INT5_IRQHandler
+FLEX_INT6_IRQHandler
+FLEX_INT7_IRQHandler
+GINT0_IRQHandler
+GINT1_IRQHandler
+SSP1_IRQHandler
+I2C_IRQHandler
+TIMER16_0_IRQHandler
+TIMER16_1_IRQHandler
+TIMER32_0_IRQHandler
+TIMER32_1_IRQHandler
+SSP0_IRQHandler
+UART_IRQHandler
+USB_IRQHandler
+USB_FIQHandler
+ADC_IRQHandler
+WDT_IRQHandler
+BOD_IRQHandler
+FMC_IRQHandler
+USBWakeup_IRQHandler
+Reserved_IRQHandler
+Default_Handler:
+				B Default_Handler
+
+        SECTION .crp:CODE:ROOT(2)
+        DATA
+/* Code Read Protection
+NO_ISP  0x4E697370 -  Prevents sampling of pin PIO0_1 for entering ISP mode
+CRP1    0x12345678 - Write to RAM command cannot access RAM below 0x10000300.
+                   - Copy RAM to flash command can not write to Sector 0.
+                   - Erase command can erase Sector 0 only when all sectors
+                     are selected for erase.
+                   - Compare command is disabled.
+                   - Read Memory command is disabled.
+CRP2    0x87654321 - Read Memory is disabled.
+                   - Write to RAM is disabled.
+                   - "Go" command is disabled.
+                   - Copy RAM to flash is disabled.
+                   - Compare is disabled.
+CRP3    0x43218765 - Access to chip via the SWD pins is disabled. ISP entry
+                     by pulling PIO0_1 LOW is disabled if a valid user code is
+                     present in flash sector 0.
+Caution: If CRP3 is selected, no future factory testing can be
+performed on the device.
+*/
+	DCD	0xFFFFFFFF
+
+        END

mcu/lpc13uxx/iar/startup_lpc13xx.s

@@ -0,0 +1,168 @@
+/**************************************************
+ *
+ * Part one of the system initialization code, contains low-level
+ * initialization, plain thumb variant.
+ *
+ * Copyright 2012 IAR Systems. All rights reserved.
+ *
+ * $Revision: 50057 $
+ *
+ **************************************************/
+
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        PUBLIC  __vector_table
+        PUBLIC  __vector_table_0x1c
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)                 ; Top of Stack
+        DCD     __iar_program_start         ; Reset Handler
+        DCD     NMI_Handler                 ; NMI Handler
+        DCD     HardFault_Handler           ; Hard Fault Handler
+        DCD     MemManage_Handler           ; MPU Fault Handler
+        DCD     BusFault_Handler            ; Bus Fault Handler
+        DCD     UsageFault_Handler          ; Usage Fault Handler
+__vector_table_0x1c
+        DCD     0                           ; Reserved
+        DCD     0                           ; Reserved
+        DCD     0                           ; Reserved
+        DCD     0                           ; Reserved
+        DCD     SVC_Handler                 ; SVCall Handler
+        DCD     DebugMon_Handler            ; Debug Monitor Handler
+        DCD     0                           ; Reserved
+        DCD     PendSV_Handler              ; PendSV Handler
+        DCD     SysTick_Handler             ; SysTick Handler
+        DCD     FLEX_INT0_IRQHandler        ; GPIO pin interrupt 0       
+        DCD     FLEX_INT1_IRQHandler        ; GPIO pin interrupt 1       
+        DCD     FLEX_INT2_IRQHandler        ; GPIO pin interrupt 2       
+        DCD     FLEX_INT3_IRQHandler        ; GPIO pin interrupt 3       
+        DCD     FLEX_INT4_IRQHandler        ; GPIO pin interrupt 4       
+        DCD     FLEX_INT5_IRQHandler        ; GPIO pin interrupt 5       
+        DCD     FLEX_INT6_IRQHandler        ; GPIO pin interrupt 6       
+        DCD     FLEX_INT7_IRQHandler        ; GPIO pin interrupt 7       
+        DCD     GINT0_IRQHandler            ; GPIO GROUP0 interrupt      
+        DCD     GINT1_IRQHandler            ; GPIO GROUP1 interrupt      
+        DCD     0                           ; Reserved
+        DCD     0                           ; Reserved
+        DCD     0                           ; Reserved
+        DCD     0                           ; Reserved
+        DCD     SSP1_IRQHandler             ; SSP1 interrupt             
+        DCD     I2C_IRQHandler              ; I2C interrupt              
+        DCD     CT16B0_IRQHandler           ; CT16B0 Match 0-3, Capture 0
+        DCD     CT16B1_IRQHandler           ; CT16B1 Match 0-3, Capture 0
+        DCD     CT32B0_IRQHandler           ; CT32B0 Match 0-3, Capture 0
+        DCD     CT32B1_IRQHandler           ; CT32B1 Match 0-3, Capture 0
+        DCD     SSP0_IRQHandler             ; SSP0 interrupt             
+        DCD     USART_IRQHandler            ; USART interrupt            
+        DCD     USB_IRQHandler              ; USB_IRQ interrupt          
+        DCD     USB_FIQHandler              ; USB_FIQ interrupt          
+        DCD     ADC_IRQHandler              ; ADC interrupt              
+        DCD     WWDT_IRQHandler             ; WWDT interrupt             
+        DCD     BOD_IRQHandler              ; BOD interrupt              
+        DCD     0                           ; Reserved
+        DCD     0                           ; Reserved
+        DCD     0                           ; Reserved
+        DCD     USBWakeup_IRQHandler        ; USB_WAKEUP interrupt       
+        
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+
+      PUBWEAK NMI_Handler       
+      PUBWEAK HardFault_Handler 
+      PUBWEAK MemManage_Handler 
+      PUBWEAK BusFault_Handler  
+      PUBWEAK UsageFault_Handler
+      PUBWEAK SVC_Handler       
+      PUBWEAK DebugMon_Handler  
+      PUBWEAK PendSV_Handler      
+      PUBWEAK SysTick_Handler     
+      PUBWEAK FLEX_INT0_IRQHandler 
+      PUBWEAK FLEX_INT1_IRQHandler 
+      PUBWEAK FLEX_INT2_IRQHandler 
+      PUBWEAK FLEX_INT3_IRQHandler 
+      PUBWEAK FLEX_INT4_IRQHandler 
+      PUBWEAK FLEX_INT5_IRQHandler 
+      PUBWEAK FLEX_INT6_IRQHandler 
+      PUBWEAK FLEX_INT7_IRQHandler 
+      PUBWEAK GINT0_IRQHandler    
+      PUBWEAK GINT1_IRQHandler    
+      PUBWEAK SSP1_IRQHandler     
+      PUBWEAK I2C_IRQHandler      
+      PUBWEAK CT16B0_IRQHandler   
+      PUBWEAK CT16B1_IRQHandler   
+      PUBWEAK CT32B0_IRQHandler   
+      PUBWEAK CT32B1_IRQHandler   
+      PUBWEAK SSP0_IRQHandler     
+      PUBWEAK USART_IRQHandler    
+      PUBWEAK USB_IRQHandler  
+      PUBWEAK USB_FIQHandler  
+      PUBWEAK ADC_IRQHandler      
+      PUBWEAK WWDT_IRQHandler     
+      PUBWEAK BOD_IRQHandler      
+      PUBWEAK USBWakeup_IRQHandler    
+
+      SECTION .text:CODE:REORDER(1)
+      THUMB
+      
+NMI_Handler       
+HardFault_Handler 
+MemManage_Handler 
+BusFault_Handler  
+UsageFault_Handler
+SVC_Handler       
+DebugMon_Handler  
+PendSV_Handler    
+SysTick_Handler   
+FLEX_INT0_IRQHandler 
+FLEX_INT1_IRQHandler 
+FLEX_INT2_IRQHandler 
+FLEX_INT3_IRQHandler 
+FLEX_INT4_IRQHandler 
+FLEX_INT5_IRQHandler 
+FLEX_INT6_IRQHandler 
+FLEX_INT7_IRQHandler 
+GINT0_IRQHandler    
+GINT1_IRQHandler    
+SSP1_IRQHandler     
+I2C_IRQHandler      
+CT16B0_IRQHandler   
+CT16B1_IRQHandler   
+CT32B0_IRQHandler   
+CT32B1_IRQHandler   
+SSP0_IRQHandler     
+USART_IRQHandler    
+USB_IRQHandler  
+USB_FIQHandler  
+ADC_IRQHandler      
+WWDT_IRQHandler     
+BOD_IRQHandler      
+USBWakeup_IRQHandler
+Default_Handler          
+        B Default_Handler 
+
+        END

mcu/lpc175x_6x/iar/startup_LPC17xx.s

@@ -0,0 +1,356 @@
+;/*****************************************************************************
+; * @file:    startup_LPC17xx.s
+; * @purpose: CMSIS Cortex-M3 Core Device Startup File
+; *           for the NXP LPC17xx Device Series
+; * @version: V1.03
+; * @date:    09. February 2010
+; *----------------------------------------------------------------------------
+; *
+; * Copyright (C) 2010 ARM Limited. All rights reserved.
+; *
+; * ARM Limited (ARM) is supplying this software for use with Cortex-Mx
+; * processor based microcontrollers.  This file can be freely distributed
+; * within development tools that are supporting such ARM based processors.
+; *
+; * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+; * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+; * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+; * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+; * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+; *
+; ******************************************************************************/
+
+
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit
+        PUBLIC  __vector_table
+        PUBLIC  __vector_table_0x1c
+        PUBLIC  __Vectors
+        PUBLIC  __Vectors_End
+        PUBLIC  __Vectors_Size
+
+        DATA
+
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler
+
+        DCD     NMI_Handler
+        DCD     HardFault_Handler
+        DCD     MemManage_Handler
+        DCD     BusFault_Handler
+        DCD     UsageFault_Handler
+__vector_table_0x1c
+        DCD     0
+        DCD     0
+        DCD     0
+        DCD     0
+        DCD     SVC_Handler
+        DCD     DebugMon_Handler
+        DCD     0
+        DCD     PendSV_Handler
+        DCD     SysTick_Handler
+
+        ; External Interrupts
+        DCD     WDT_IRQHandler            ; 16: Watchdog Timer
+        DCD     TIMER0_IRQHandler         ; 17: Timer0
+        DCD     TIMER1_IRQHandler         ; 18: Timer1
+        DCD     TIMER2_IRQHandler         ; 19: Timer2
+        DCD     TIMER3_IRQHandler         ; 20: Timer3
+        DCD     UART0_IRQHandler          ; 21: UART0
+        DCD     UART1_IRQHandler          ; 22: UART1
+        DCD     UART2_IRQHandler          ; 23: UART2
+        DCD     UART3_IRQHandler          ; 24: UART3
+        DCD     PWM1_IRQHandler           ; 25: PWM1
+        DCD     I2C0_IRQHandler           ; 26: I2C0
+        DCD     I2C1_IRQHandler           ; 27: I2C1
+        DCD     I2C2_IRQHandler           ; 28: I2C2
+        DCD     SPI_IRQHandler            ; 29: SPI
+        DCD     SSP0_IRQHandler           ; 30: SSP0
+        DCD     SSP1_IRQHandler           ; 31: SSP1
+        DCD     PLL0_IRQHandler           ; 32: PLL0 Lock (Main PLL)
+        DCD     RTC_IRQHandler            ; 33: Real Time Clock
+        DCD     EINT0_IRQHandler          ; 34: External Interrupt 0
+        DCD     EINT1_IRQHandler          ; 35: External Interrupt 1
+        DCD     EINT2_IRQHandler          ; 36: External Interrupt 2
+        DCD     EINT3_IRQHandler          ; 37: External Interrupt 3
+        DCD     ADC_IRQHandler            ; 38: A/D Converter
+        DCD     BOD_IRQHandler            ; 39: Brown-Out Detect
+        DCD     USB_IRQHandler            ; 40: USB
+        DCD     CAN_IRQHandler            ; 41: CAN
+        DCD     DMA_IRQHandler            ; 42: General Purpose DMA
+        DCD     I2S_IRQHandler            ; 43: I2S
+        DCD     ENET_IRQHandler           ; 44: Ethernet
+        DCD     RIT_IRQHandler            ; 45: Repetitive Interrupt Timer
+        DCD     MCPWM_IRQHandler          ; 46: Motor Control PWM
+        DCD     QEI_IRQHandler            ; 47: Quadrature Encoder Interface
+        DCD     PLL1_IRQHandler           ; 48: PLL1 Lock (USB PLL)
+        DCD		USBActivity_IRQHandler	  ; 49: USB Activity Interrupt
+        DCD		CANActivity_IRQHandler	  ; 50: CAN Activity Interrupt
+__Vectors_End
+
+__Vectors       EQU   __vector_table
+__Vectors_Size 	EQU 	__Vectors_End - __Vectors
+
+        PUBLIC    CRP_Value
+        RSEG      CRPKEY :CODE(2)
+CRP_Value
+       DCD  0xFFFFFFFF
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:REORDER(2)
+Reset_Handler
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:REORDER(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:REORDER(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:REORDER(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:REORDER(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:REORDER(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:REORDER(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:REORDER(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:REORDER(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:REORDER(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WDT_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+WDT_IRQHandler
+        B WDT_IRQHandler
+
+        PUBWEAK TIMER0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIMER0_IRQHandler
+        B TIMER0_IRQHandler
+
+        PUBWEAK TIMER1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIMER1_IRQHandler
+        B TIMER1_IRQHandler
+
+        PUBWEAK TIMER2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIMER2_IRQHandler
+        B TIMER2_IRQHandler
+
+        PUBWEAK TIMER3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+TIMER3_IRQHandler
+        B TIMER3_IRQHandler
+
+        PUBWEAK UART0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+UART0_IRQHandler
+        B UART0_IRQHandler
+
+        PUBWEAK UART1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+UART1_IRQHandler
+        B UART1_IRQHandler
+
+        PUBWEAK UART2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+UART2_IRQHandler
+        B UART2_IRQHandler
+
+        PUBWEAK UART3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+UART3_IRQHandler
+        B UART3_IRQHandler
+
+        PUBWEAK PWM1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+PWM1_IRQHandler
+        B PWM1_IRQHandler
+
+        PUBWEAK I2C0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C0_IRQHandler
+        B I2C0_IRQHandler
+
+        PUBWEAK I2C1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C1_IRQHandler
+        B I2C1_IRQHandler
+
+        PUBWEAK I2C2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2C2_IRQHandler
+        B I2C2_IRQHandler
+
+        PUBWEAK SPI_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SPI_IRQHandler
+        B SPI_IRQHandler
+
+        PUBWEAK SSP0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SSP0_IRQHandler
+        B SSP0_IRQHandler
+
+        PUBWEAK SSP1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+SSP1_IRQHandler
+        B SSP1_IRQHandler
+
+        PUBWEAK PLL0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+PLL0_IRQHandler
+        B PLL0_IRQHandler
+
+        PUBWEAK RTC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RTC_IRQHandler
+        B RTC_IRQHandler
+
+        PUBWEAK EINT0_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EINT0_IRQHandler
+        B EINT0_IRQHandler
+
+        PUBWEAK EINT1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EINT1_IRQHandler
+        B EINT1_IRQHandler
+
+        PUBWEAK EINT2_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EINT2_IRQHandler
+        B EINT2_IRQHandler
+
+        PUBWEAK EINT3_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+EINT3_IRQHandler
+        B EINT3_IRQHandler
+
+        PUBWEAK ADC_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ADC_IRQHandler
+        B ADC_IRQHandler
+
+        PUBWEAK BOD_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+BOD_IRQHandler
+        B BOD_IRQHandler
+
+        PUBWEAK USB_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USB_IRQHandler
+        B USB_IRQHandler
+
+        PUBWEAK CAN_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CAN_IRQHandler
+        B CAN_IRQHandler
+
+        PUBWEAK DMA_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+DMA_IRQHandler
+        B DMA_IRQHandler
+
+        PUBWEAK I2S_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+I2S_IRQHandler
+        B I2S_IRQHandler
+
+        PUBWEAK ENET_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+ENET_IRQHandler
+        B ENET_IRQHandler
+
+        PUBWEAK RIT_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+RIT_IRQHandler
+        B RIT_IRQHandler
+
+        PUBWEAK MCPWM_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+MCPWM_IRQHandler
+        B MCPWM_IRQHandler
+
+        PUBWEAK QEI_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+QEI_IRQHandler
+        B QEI_IRQHandler
+
+        PUBWEAK PLL1_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+PLL1_IRQHandler
+        B PLL1_IRQHandler
+
+        PUBWEAK USBActivity_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+USBActivity_IRQHandler
+        B USBActivity_IRQHandler
+
+        PUBWEAK CANActivity_IRQHandler
+        SECTION .text:CODE:REORDER(1)
+CANActivity_IRQHandler
+        B CANActivity_IRQHandler
+
+        END

mcu/lpc43xx/keil_ram.ini → mcu/lpc43xx/keil/keil_ram.ini

@@ -1,11 +1,11 @@
-
-FUNC void Setup (unsigned int region) {
-  region &= 0xFFFF0000;
-  SP = _RDWORD(region);                          // Setup Stack Pointer
-  PC = _RDWORD(region + 4);                          // Setup Program Counter
-  _WDWORD(0xE000ED08, region);                   // Setup Vector Table Offset Register
-}
-
-//LOAD "Board NGX4330\\host_os_none.axf" INCREMENTAL
-LOAD %L INCREMENTAL
-Setup(__scatterload); // Get ready to execute image in SRAM or whatever region it is in g,main
+
+FUNC void Setup (unsigned int region) {
+  region &= 0xFFFF0000;
+  SP = _RDWORD(region);                          // Setup Stack Pointer
+  PC = _RDWORD(region + 4);                          // Setup Program Counter
+  _WDWORD(0xE000ED08, region);                   // Setup Vector Table Offset Register
+}
+
+//LOAD "Board NGX4330\\host_os_none.axf" INCREMENTAL
+LOAD %L INCREMENTAL
+Setup(__scatterload); // Get ready to execute image in SRAM or whatever region it is in g,main