Modify cdc_msc example for Bridgetek FT90x/FT93x

Add in endpoint definitions for the Bridgetek devices in usb_descriptors.c and allow high speed in tusb_config.h.

examples/device/cdc_msc/src/tusb_config.h

@@ -48,7 +48,8 @@
 // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
 #ifndef BOARD_DEVICE_RHPORT_SPEED
   #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X)
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X || \
+       CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X )
     #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
   #else
     #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED

examples/device/cdc_msc/src/usb_descriptors.c

@@ -116,6 +116,16 @@ enum
   #define EPNUM_MSC_OUT     0x05
   #define EPNUM_MSC_IN      0x84
 
+#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X
+  // FT9XX don't support a same endpoint number with different direction IN and OUT
+  //    e.g EP1 OUT & EP1 IN cannot exist together
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x83
+
+  #define EPNUM_MSC_OUT     0x04
+  #define EPNUM_MSC_IN      0x85
+
 #else
   #define EPNUM_CDC_NOTIF   0x81
   #define EPNUM_CDC_OUT     0x02