add missing musb type file

src/portable/mentor/musb/musb_type.h

@@ -0,0 +1,2624 @@
+/******************************************************************************
+*
+* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*
+*  Redistributions of source code must retain the above copyright
+*  notice, this list of conditions and the following disclaimer.
+*
+*  Redistributions in binary form must reproduce the above copyright
+*  notice, this list of conditions and the following disclaimer in the
+*  documentation and/or other materials provided with the
+*  distribution.
+*
+*  Neither the name of Texas Instruments Incorporated nor the names of
+*  its contributors may be used to endorse or promote products derived
+*  from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+*******************************************************************************/
+
+#ifndef _TUSB_MUSB_TYPE_H_
+#define _TUSB_MUSB_TYPE_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_FADDR register.
+//
+//*****************************************************************************
+#define USB_FADDR_M             0x0000007F  // Function Address
+#define USB_FADDR_S             0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_POWER register.
+//
+//*****************************************************************************
+#define USB_POWER_ISOUP         0x00000080  // Isochronous Update
+#define USB_POWER_SOFTCONN      0x00000040  // Soft Connect/Disconnect
+#define USB_POWER_HSENAB        0x00000020  // High Speed Enable
+#define USB_POWER_HSMODE        0x00000010  // High Speed Enable
+#define USB_POWER_RESET         0x00000008  // RESET Signaling
+#define USB_POWER_RESUME        0x00000004  // RESUME Signaling
+#define USB_POWER_SUSPEND       0x00000002  // SUSPEND Mode
+#define USB_POWER_PWRDNPHY      0x00000001  // Power Down PHY
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXIS register.
+//
+//*****************************************************************************
+#define USB_TXIS_EP7            0x00000080  // TX Endpoint 7 Interrupt
+#define USB_TXIS_EP6            0x00000040  // TX Endpoint 6 Interrupt
+#define USB_TXIS_EP5            0x00000020  // TX Endpoint 5 Interrupt
+#define USB_TXIS_EP4            0x00000010  // TX Endpoint 4 Interrupt
+#define USB_TXIS_EP3            0x00000008  // TX Endpoint 3 Interrupt
+#define USB_TXIS_EP2            0x00000004  // TX Endpoint 2 Interrupt
+#define USB_TXIS_EP1            0x00000002  // TX Endpoint 1 Interrupt
+#define USB_TXIS_EP0            0x00000001  // TX and RX Endpoint 0 Interrupt
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXIS register.
+//
+//*****************************************************************************
+#define USB_RXIS_EP7            0x00000080  // RX Endpoint 7 Interrupt
+#define USB_RXIS_EP6            0x00000040  // RX Endpoint 6 Interrupt
+#define USB_RXIS_EP5            0x00000020  // RX Endpoint 5 Interrupt
+#define USB_RXIS_EP4            0x00000010  // RX Endpoint 4 Interrupt
+#define USB_RXIS_EP3            0x00000008  // RX Endpoint 3 Interrupt
+#define USB_RXIS_EP2            0x00000004  // RX Endpoint 2 Interrupt
+#define USB_RXIS_EP1            0x00000002  // RX Endpoint 1 Interrupt
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXIE register.
+//
+//*****************************************************************************
+#define USB_TXIE_EP7            0x00000080  // TX Endpoint 7 Interrupt Enable
+#define USB_TXIE_EP6            0x00000040  // TX Endpoint 6 Interrupt Enable
+#define USB_TXIE_EP5            0x00000020  // TX Endpoint 5 Interrupt Enable
+#define USB_TXIE_EP4            0x00000010  // TX Endpoint 4 Interrupt Enable
+#define USB_TXIE_EP3            0x00000008  // TX Endpoint 3 Interrupt Enable
+#define USB_TXIE_EP2            0x00000004  // TX Endpoint 2 Interrupt Enable
+#define USB_TXIE_EP1            0x00000002  // TX Endpoint 1 Interrupt Enable
+#define USB_TXIE_EP0            0x00000001  // TX and RX Endpoint 0 Interrupt
+                                            // Enable
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXIE register.
+//
+//*****************************************************************************
+#define USB_RXIE_EP7            0x00000080  // RX Endpoint 7 Interrupt Enable
+#define USB_RXIE_EP6            0x00000040  // RX Endpoint 6 Interrupt Enable
+#define USB_RXIE_EP5            0x00000020  // RX Endpoint 5 Interrupt Enable
+#define USB_RXIE_EP4            0x00000010  // RX Endpoint 4 Interrupt Enable
+#define USB_RXIE_EP3            0x00000008  // RX Endpoint 3 Interrupt Enable
+#define USB_RXIE_EP2            0x00000004  // RX Endpoint 2 Interrupt Enable
+#define USB_RXIE_EP1            0x00000002  // RX Endpoint 1 Interrupt Enable
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_IS register.
+//
+//*****************************************************************************
+#define USB_IS_VBUSERR          0x00000080  // VBUS Error (OTG only)
+#define USB_IS_SESREQ           0x00000040  // SESSION REQUEST (OTG only)
+#define USB_IS_DISCON           0x00000020  // Session Disconnect (OTG only)
+#define USB_IS_CONN             0x00000010  // Session Connect
+#define USB_IS_SOF              0x00000008  // Start of Frame
+#define USB_IS_BABBLE           0x00000004  // Babble Detected
+#define USB_IS_RESET            0x00000004  // RESET Signaling Detected
+#define USB_IS_RESUME           0x00000002  // RESUME Signaling Detected
+#define USB_IS_SUSPEND          0x00000001  // SUSPEND Signaling Detected
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_IE register.
+//
+//*****************************************************************************
+#define USB_IE_VBUSERR          0x00000080  // Enable VBUS Error Interrupt (OTG
+                                            // only)
+#define USB_IE_SESREQ           0x00000040  // Enable Session Request (OTG
+                                            // only)
+#define USB_IE_DISCON           0x00000020  // Enable Disconnect Interrupt
+#define USB_IE_CONN             0x00000010  // Enable Connect Interrupt
+#define USB_IE_SOF              0x00000008  // Enable Start-of-Frame Interrupt
+#define USB_IE_BABBLE           0x00000004  // Enable Babble Interrupt
+#define USB_IE_RESET            0x00000004  // Enable RESET Interrupt
+#define USB_IE_RESUME           0x00000002  // Enable RESUME Interrupt
+#define USB_IE_SUSPND           0x00000001  // Enable SUSPEND Interrupt
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_FRAME register.
+//
+//*****************************************************************************
+#define USB_FRAME_M             0x000007FF  // Frame Number
+#define USB_FRAME_S             0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_EPIDX register.
+//
+//*****************************************************************************
+#define USB_EPIDX_EPIDX_M       0x0000000F  // Endpoint Index
+#define USB_EPIDX_EPIDX_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TEST register.
+//
+//*****************************************************************************
+#define USB_TEST_FORCEH         0x00000080  // Force Host Mode
+#define USB_TEST_FIFOACC        0x00000040  // FIFO Access
+#define USB_TEST_FORCEFS        0x00000020  // Force Full-Speed Mode
+#define USB_TEST_FORCEHS        0x00000010  // Force High-Speed Mode
+#define USB_TEST_TESTPKT        0x00000008  // Test Packet Mode Enable
+#define USB_TEST_TESTK          0x00000004  // Test_K Mode Enable
+#define USB_TEST_TESTJ          0x00000002  // Test_J Mode Enable
+#define USB_TEST_TESTSE0NAK     0x00000001  // Test_SE0_NAK Test Mode Enable
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_FIFO0 register.
+//
+//*****************************************************************************
+#define USB_FIFO0_EPDATA_M      0xFFFFFFFF  // Endpoint Data
+#define USB_FIFO0_EPDATA_S      0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_FIFO1 register.
+//
+//*****************************************************************************
+#define USB_FIFO1_EPDATA_M      0xFFFFFFFF  // Endpoint Data
+#define USB_FIFO1_EPDATA_S      0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_FIFO2 register.
+//
+//*****************************************************************************
+#define USB_FIFO2_EPDATA_M      0xFFFFFFFF  // Endpoint Data
+#define USB_FIFO2_EPDATA_S      0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_FIFO3 register.
+//
+//*****************************************************************************
+#define USB_FIFO3_EPDATA_M      0xFFFFFFFF  // Endpoint Data
+#define USB_FIFO3_EPDATA_S      0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_FIFO4 register.
+//
+//*****************************************************************************
+#define USB_FIFO4_EPDATA_M      0xFFFFFFFF  // Endpoint Data
+#define USB_FIFO4_EPDATA_S      0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_FIFO5 register.
+//
+//*****************************************************************************
+#define USB_FIFO5_EPDATA_M      0xFFFFFFFF  // Endpoint Data
+#define USB_FIFO5_EPDATA_S      0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_FIFO6 register.
+//
+//*****************************************************************************
+#define USB_FIFO6_EPDATA_M      0xFFFFFFFF  // Endpoint Data
+#define USB_FIFO6_EPDATA_S      0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_FIFO7 register.
+//
+//*****************************************************************************
+#define USB_FIFO7_EPDATA_M      0xFFFFFFFF  // Endpoint Data
+#define USB_FIFO7_EPDATA_S      0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DEVCTL register.
+//
+//*****************************************************************************
+#define USB_DEVCTL_DEV          0x00000080  // Device Mode (OTG only)
+#define USB_DEVCTL_FSDEV        0x00000040  // Full-Speed Device Detected
+#define USB_DEVCTL_LSDEV        0x00000020  // Low-Speed Device Detected
+#define USB_DEVCTL_VBUS_M       0x00000018  // VBUS Level (OTG only)
+#define USB_DEVCTL_VBUS_NONE    0x00000000  // Below SessionEnd
+#define USB_DEVCTL_VBUS_SEND    0x00000008  // Above SessionEnd, below AValid
+#define USB_DEVCTL_VBUS_AVALID  0x00000010  // Above AValid, below VBUSValid
+#define USB_DEVCTL_VBUS_VALID   0x00000018  // Above VBUSValid
+#define USB_DEVCTL_HOST         0x00000004  // Host Mode
+#define USB_DEVCTL_HOSTREQ      0x00000002  // Host Request (OTG only)
+#define USB_DEVCTL_SESSION      0x00000001  // Session Start/End (OTG only)
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_CCONF register.
+//
+//*****************************************************************************
+#define USB_CCONF_TXEDMA        0x00000002  // TX Early DMA Enable
+#define USB_CCONF_RXEDMA        0x00000001  // TX Early DMA Enable
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXFIFOSZ register.
+//
+//*****************************************************************************
+#define USB_TXFIFOSZ_DPB        0x00000010  // Double Packet Buffer Support
+#define USB_TXFIFOSZ_SIZE_M     0x0000000F  // Max Packet Size
+#define USB_TXFIFOSZ_SIZE_8     0x00000000  // 8
+#define USB_TXFIFOSZ_SIZE_16    0x00000001  // 16
+#define USB_TXFIFOSZ_SIZE_32    0x00000002  // 32
+#define USB_TXFIFOSZ_SIZE_64    0x00000003  // 64
+#define USB_TXFIFOSZ_SIZE_128   0x00000004  // 128
+#define USB_TXFIFOSZ_SIZE_256   0x00000005  // 256
+#define USB_TXFIFOSZ_SIZE_512   0x00000006  // 512
+#define USB_TXFIFOSZ_SIZE_1024  0x00000007  // 1024
+#define USB_TXFIFOSZ_SIZE_2048  0x00000008  // 2048
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXFIFOSZ register.
+//
+//*****************************************************************************
+#define USB_RXFIFOSZ_DPB        0x00000010  // Double Packet Buffer Support
+#define USB_RXFIFOSZ_SIZE_M     0x0000000F  // Max Packet Size
+#define USB_RXFIFOSZ_SIZE_8     0x00000000  // 8
+#define USB_RXFIFOSZ_SIZE_16    0x00000001  // 16
+#define USB_RXFIFOSZ_SIZE_32    0x00000002  // 32
+#define USB_RXFIFOSZ_SIZE_64    0x00000003  // 64
+#define USB_RXFIFOSZ_SIZE_128   0x00000004  // 128
+#define USB_RXFIFOSZ_SIZE_256   0x00000005  // 256
+#define USB_RXFIFOSZ_SIZE_512   0x00000006  // 512
+#define USB_RXFIFOSZ_SIZE_1024  0x00000007  // 1024
+#define USB_RXFIFOSZ_SIZE_2048  0x00000008  // 2048
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXFIFOADD
+// register.
+//
+//*****************************************************************************
+#define USB_TXFIFOADD_ADDR_M    0x000001FF  // Transmit/Receive Start Address
+#define USB_TXFIFOADD_ADDR_S    0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXFIFOADD
+// register.
+//
+//*****************************************************************************
+#define USB_RXFIFOADD_ADDR_M    0x000001FF  // Transmit/Receive Start Address
+#define USB_RXFIFOADD_ADDR_S    0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_ULPIVBUSCTL
+// register.
+//
+//*****************************************************************************
+#define USB_ULPIVBUSCTL_USEEXTVBUSIND                                         \
+                                0x00000002  // Use External VBUS Indicator
+#define USB_ULPIVBUSCTL_USEEXTVBUS                                            \
+                                0x00000001  // Use External VBUS
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_ULPIREGDATA
+// register.
+//
+//*****************************************************************************
+#define USB_ULPIREGDATA_REGDATA_M                                             \
+                                0x000000FF  // Register Data
+#define USB_ULPIREGDATA_REGDATA_S                                             \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_ULPIREGADDR
+// register.
+//
+//*****************************************************************************
+#define USB_ULPIREGADDR_ADDR_M  0x000000FF  // Register Address
+#define USB_ULPIREGADDR_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_ULPIREGCTL
+// register.
+//
+//*****************************************************************************
+#define USB_ULPIREGCTL_RDWR     0x00000004  // Read/Write Control
+#define USB_ULPIREGCTL_REGCMPLT 0x00000002  // Register Access Complete
+#define USB_ULPIREGCTL_REGACC   0x00000001  // Initiate Register Access
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_EPINFO register.
+//
+//*****************************************************************************
+#define USB_EPINFO_RXEP_M       0x000000F0  // RX Endpoints
+#define USB_EPINFO_TXEP_M       0x0000000F  // TX Endpoints
+#define USB_EPINFO_RXEP_S       4
+#define USB_EPINFO_TXEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RAMINFO register.
+//
+//*****************************************************************************
+#define USB_RAMINFO_DMACHAN_M   0x000000F0  // DMA Channels
+#define USB_RAMINFO_RAMBITS_M   0x0000000F  // RAM Address Bus Width
+#define USB_RAMINFO_DMACHAN_S   4
+#define USB_RAMINFO_RAMBITS_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_CONTIM register.
+//
+//*****************************************************************************
+#define USB_CONTIM_WTCON_M      0x000000F0  // Connect Wait
+#define USB_CONTIM_WTID_M       0x0000000F  // Wait ID
+#define USB_CONTIM_WTCON_S      4
+#define USB_CONTIM_WTID_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_VPLEN register.
+//
+//*****************************************************************************
+#define USB_VPLEN_VPLEN_M       0x000000FF  // VBUS Pulse Length
+#define USB_VPLEN_VPLEN_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_HSEOF register.
+//
+//*****************************************************************************
+#define USB_HSEOF_HSEOFG_M      0x000000FF  // HIgh-Speed End-of-Frame Gap
+#define USB_HSEOF_HSEOFG_S      0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_FSEOF register.
+//
+//*****************************************************************************
+#define USB_FSEOF_FSEOFG_M      0x000000FF  // Full-Speed End-of-Frame Gap
+#define USB_FSEOF_FSEOFG_S      0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_LSEOF register.
+//
+//*****************************************************************************
+#define USB_LSEOF_LSEOFG_M      0x000000FF  // Low-Speed End-of-Frame Gap
+#define USB_LSEOF_LSEOFG_S      0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXFUNCADDR0
+// register.
+//
+//*****************************************************************************
+#define USB_TXFUNCADDR0_ADDR_M  0x0000007F  // Device Address
+#define USB_TXFUNCADDR0_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBADDR0
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBADDR0_ADDR_M   0x0000007F  // Hub Address
+#define USB_TXHUBADDR0_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBPORT0
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBPORT0_PORT_M   0x0000007F  // Hub Port
+#define USB_TXHUBPORT0_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXFUNCADDR1
+// register.
+//
+//*****************************************************************************
+#define USB_TXFUNCADDR1_ADDR_M  0x0000007F  // Device Address
+#define USB_TXFUNCADDR1_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBADDR1
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBADDR1_ADDR_M   0x0000007F  // Hub Address
+#define USB_TXHUBADDR1_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBPORT1
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBPORT1_PORT_M   0x0000007F  // Hub Port
+#define USB_TXHUBPORT1_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXFUNCADDR1
+// register.
+//
+//*****************************************************************************
+#define USB_RXFUNCADDR1_ADDR_M  0x0000007F  // Device Address
+#define USB_RXFUNCADDR1_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBADDR1
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBADDR1_ADDR_M   0x0000007F  // Hub Address
+#define USB_RXHUBADDR1_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBPORT1
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBPORT1_PORT_M   0x0000007F  // Hub Port
+#define USB_RXHUBPORT1_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXFUNCADDR2
+// register.
+//
+//*****************************************************************************
+#define USB_TXFUNCADDR2_ADDR_M  0x0000007F  // Device Address
+#define USB_TXFUNCADDR2_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBADDR2
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBADDR2_ADDR_M   0x0000007F  // Hub Address
+#define USB_TXHUBADDR2_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBPORT2
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBPORT2_PORT_M   0x0000007F  // Hub Port
+#define USB_TXHUBPORT2_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXFUNCADDR2
+// register.
+//
+//*****************************************************************************
+#define USB_RXFUNCADDR2_ADDR_M  0x0000007F  // Device Address
+#define USB_RXFUNCADDR2_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBADDR2
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBADDR2_ADDR_M   0x0000007F  // Hub Address
+#define USB_RXHUBADDR2_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBPORT2
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBPORT2_PORT_M   0x0000007F  // Hub Port
+#define USB_RXHUBPORT2_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXFUNCADDR3
+// register.
+//
+//*****************************************************************************
+#define USB_TXFUNCADDR3_ADDR_M  0x0000007F  // Device Address
+#define USB_TXFUNCADDR3_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBADDR3
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBADDR3_ADDR_M   0x0000007F  // Hub Address
+#define USB_TXHUBADDR3_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBPORT3
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBPORT3_PORT_M   0x0000007F  // Hub Port
+#define USB_TXHUBPORT3_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXFUNCADDR3
+// register.
+//
+//*****************************************************************************
+#define USB_RXFUNCADDR3_ADDR_M  0x0000007F  // Device Address
+#define USB_RXFUNCADDR3_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBADDR3
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBADDR3_ADDR_M   0x0000007F  // Hub Address
+#define USB_RXHUBADDR3_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBPORT3
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBPORT3_PORT_M   0x0000007F  // Hub Port
+#define USB_RXHUBPORT3_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXFUNCADDR4
+// register.
+//
+//*****************************************************************************
+#define USB_TXFUNCADDR4_ADDR_M  0x0000007F  // Device Address
+#define USB_TXFUNCADDR4_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBADDR4
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBADDR4_ADDR_M   0x0000007F  // Hub Address
+#define USB_TXHUBADDR4_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBPORT4
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBPORT4_PORT_M   0x0000007F  // Hub Port
+#define USB_TXHUBPORT4_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXFUNCADDR4
+// register.
+//
+//*****************************************************************************
+#define USB_RXFUNCADDR4_ADDR_M  0x0000007F  // Device Address
+#define USB_RXFUNCADDR4_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBADDR4
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBADDR4_ADDR_M   0x0000007F  // Hub Address
+#define USB_RXHUBADDR4_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBPORT4
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBPORT4_PORT_M   0x0000007F  // Hub Port
+#define USB_RXHUBPORT4_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXFUNCADDR5
+// register.
+//
+//*****************************************************************************
+#define USB_TXFUNCADDR5_ADDR_M  0x0000007F  // Device Address
+#define USB_TXFUNCADDR5_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBADDR5
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBADDR5_ADDR_M   0x0000007F  // Hub Address
+#define USB_TXHUBADDR5_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBPORT5
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBPORT5_PORT_M   0x0000007F  // Hub Port
+#define USB_TXHUBPORT5_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXFUNCADDR5
+// register.
+//
+//*****************************************************************************
+#define USB_RXFUNCADDR5_ADDR_M  0x0000007F  // Device Address
+#define USB_RXFUNCADDR5_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBADDR5
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBADDR5_ADDR_M   0x0000007F  // Hub Address
+#define USB_RXHUBADDR5_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBPORT5
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBPORT5_PORT_M   0x0000007F  // Hub Port
+#define USB_RXHUBPORT5_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXFUNCADDR6
+// register.
+//
+//*****************************************************************************
+#define USB_TXFUNCADDR6_ADDR_M  0x0000007F  // Device Address
+#define USB_TXFUNCADDR6_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBADDR6
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBADDR6_ADDR_M   0x0000007F  // Hub Address
+#define USB_TXHUBADDR6_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBPORT6
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBPORT6_PORT_M   0x0000007F  // Hub Port
+#define USB_TXHUBPORT6_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXFUNCADDR6
+// register.
+//
+//*****************************************************************************
+#define USB_RXFUNCADDR6_ADDR_M  0x0000007F  // Device Address
+#define USB_RXFUNCADDR6_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBADDR6
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBADDR6_ADDR_M   0x0000007F  // Hub Address
+#define USB_RXHUBADDR6_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBPORT6
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBPORT6_PORT_M   0x0000007F  // Hub Port
+#define USB_RXHUBPORT6_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXFUNCADDR7
+// register.
+//
+//*****************************************************************************
+#define USB_TXFUNCADDR7_ADDR_M  0x0000007F  // Device Address
+#define USB_TXFUNCADDR7_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBADDR7
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBADDR7_ADDR_M   0x0000007F  // Hub Address
+#define USB_TXHUBADDR7_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXHUBPORT7
+// register.
+//
+//*****************************************************************************
+#define USB_TXHUBPORT7_PORT_M   0x0000007F  // Hub Port
+#define USB_TXHUBPORT7_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXFUNCADDR7
+// register.
+//
+//*****************************************************************************
+#define USB_RXFUNCADDR7_ADDR_M  0x0000007F  // Device Address
+#define USB_RXFUNCADDR7_ADDR_S  0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBADDR7
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBADDR7_ADDR_M   0x0000007F  // Hub Address
+#define USB_RXHUBADDR7_ADDR_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXHUBPORT7
+// register.
+//
+//*****************************************************************************
+#define USB_RXHUBPORT7_PORT_M   0x0000007F  // Hub Port
+#define USB_RXHUBPORT7_PORT_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_CSRL0 register.
+//
+//*****************************************************************************
+#define USB_CSRL0_NAKTO         0x00000080  // NAK Timeout
+#define USB_CSRL0_SETENDC       0x00000080  // Setup End Clear
+#define USB_CSRL0_STATUS        0x00000040  // STATUS Packet
+#define USB_CSRL0_RXRDYC        0x00000040  // RXRDY Clear
+#define USB_CSRL0_REQPKT        0x00000020  // Request Packet
+#define USB_CSRL0_STALL         0x00000020  // Send Stall
+#define USB_CSRL0_SETEND        0x00000010  // Setup End
+#define USB_CSRL0_ERROR         0x00000010  // Error
+#define USB_CSRL0_DATAEND       0x00000008  // Data End
+#define USB_CSRL0_SETUP         0x00000008  // Setup Packet
+#define USB_CSRL0_STALLED       0x00000004  // Endpoint Stalled
+#define USB_CSRL0_TXRDY         0x00000002  // Transmit Packet Ready
+#define USB_CSRL0_RXRDY         0x00000001  // Receive Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_CSRH0 register.
+//
+//*****************************************************************************
+#define USB_CSRH0_DISPING       0x00000008  // PING Disable
+#define USB_CSRH0_DTWE          0x00000004  // Data Toggle Write Enable
+#define USB_CSRH0_DT            0x00000002  // Data Toggle
+#define USB_CSRH0_FLUSH         0x00000001  // Flush FIFO
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_COUNT0 register.
+//
+//*****************************************************************************
+#define USB_COUNT0_COUNT_M      0x0000007F  // FIFO Count
+#define USB_COUNT0_COUNT_S      0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TYPE0 register.
+//
+//*****************************************************************************
+#define USB_TYPE0_SPEED_M       0x000000C0  // Operating Speed
+#define USB_TYPE0_SPEED_HIGH    0x00000040  // High
+#define USB_TYPE0_SPEED_FULL    0x00000080  // Full
+#define USB_TYPE0_SPEED_LOW     0x000000C0  // Low
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_NAKLMT register.
+//
+//*****************************************************************************
+#define USB_NAKLMT_NAKLMT_M     0x0000001F  // EP0 NAK Limit
+#define USB_NAKLMT_NAKLMT_S     0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXMAXP1 register.
+//
+//*****************************************************************************
+#define USB_TXMAXP1_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_TXMAXP1_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRL1 register.
+//
+//*****************************************************************************
+#define USB_TXCSRL1_NAKTO       0x00000080  // NAK Timeout
+#define USB_TXCSRL1_CLRDT       0x00000040  // Clear Data Toggle
+#define USB_TXCSRL1_STALLED     0x00000020  // Endpoint Stalled
+#define USB_TXCSRL1_STALL       0x00000010  // Send STALL
+#define USB_TXCSRL1_SETUP       0x00000010  // Setup Packet
+#define USB_TXCSRL1_FLUSH       0x00000008  // Flush FIFO
+#define USB_TXCSRL1_ERROR       0x00000004  // Error
+#define USB_TXCSRL1_UNDRN       0x00000004  // Underrun
+#define USB_TXCSRL1_FIFONE      0x00000002  // FIFO Not Empty
+#define USB_TXCSRL1_TXRDY       0x00000001  // Transmit Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRH1 register.
+//
+//*****************************************************************************
+#define USB_TXCSRH1_AUTOSET     0x00000080  // Auto Set
+#define USB_TXCSRH1_ISO         0x00000040  // Isochronous Transfers
+#define USB_TXCSRH1_MODE        0x00000020  // Mode
+#define USB_TXCSRH1_DMAEN       0x00000010  // DMA Request Enable
+#define USB_TXCSRH1_FDT         0x00000008  // Force Data Toggle
+#define USB_TXCSRH1_DMAMOD      0x00000004  // DMA Request Mode
+#define USB_TXCSRH1_DTWE        0x00000002  // Data Toggle Write Enable
+#define USB_TXCSRH1_DT          0x00000001  // Data Toggle
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXMAXP1 register.
+//
+//*****************************************************************************
+#define USB_RXMAXP1_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_RXMAXP1_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRL1 register.
+//
+//*****************************************************************************
+#define USB_RXCSRL1_CLRDT       0x00000080  // Clear Data Toggle
+#define USB_RXCSRL1_STALLED     0x00000040  // Endpoint Stalled
+#define USB_RXCSRL1_STALL       0x00000020  // Send STALL
+#define USB_RXCSRL1_REQPKT      0x00000020  // Request Packet
+#define USB_RXCSRL1_FLUSH       0x00000010  // Flush FIFO
+#define USB_RXCSRL1_DATAERR     0x00000008  // Data Error
+#define USB_RXCSRL1_NAKTO       0x00000008  // NAK Timeout
+#define USB_RXCSRL1_OVER        0x00000004  // Overrun
+#define USB_RXCSRL1_ERROR       0x00000004  // Error
+#define USB_RXCSRL1_FULL        0x00000002  // FIFO Full
+#define USB_RXCSRL1_RXRDY       0x00000001  // Receive Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRH1 register.
+//
+//*****************************************************************************
+#define USB_RXCSRH1_AUTOCL      0x00000080  // Auto Clear
+#define USB_RXCSRH1_AUTORQ      0x00000040  // Auto Request
+#define USB_RXCSRH1_ISO         0x00000040  // Isochronous Transfers
+#define USB_RXCSRH1_DMAEN       0x00000020  // DMA Request Enable
+#define USB_RXCSRH1_DISNYET     0x00000010  // Disable NYET
+#define USB_RXCSRH1_PIDERR      0x00000010  // PID Error
+#define USB_RXCSRH1_DMAMOD      0x00000008  // DMA Request Mode
+#define USB_RXCSRH1_DTWE        0x00000004  // Data Toggle Write Enable
+#define USB_RXCSRH1_DT          0x00000002  // Data Toggle
+#define USB_RXCSRH1_INCOMPRX    0x00000001  // Incomplete RX Transmission
+                                            // Status
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCOUNT1 register.
+//
+//*****************************************************************************
+#define USB_RXCOUNT1_COUNT_M    0x00001FFF  // Receive Packet Count
+#define USB_RXCOUNT1_COUNT_S    0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXTYPE1 register.
+//
+//*****************************************************************************
+#define USB_TXTYPE1_SPEED_M     0x000000C0  // Operating Speed
+#define USB_TXTYPE1_SPEED_DFLT  0x00000000  // Default
+#define USB_TXTYPE1_SPEED_HIGH  0x00000040  // High
+#define USB_TXTYPE1_SPEED_FULL  0x00000080  // Full
+#define USB_TXTYPE1_SPEED_LOW   0x000000C0  // Low
+#define USB_TXTYPE1_PROTO_M     0x00000030  // Protocol
+#define USB_TXTYPE1_PROTO_CTRL  0x00000000  // Control
+#define USB_TXTYPE1_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_TXTYPE1_PROTO_BULK  0x00000020  // Bulk
+#define USB_TXTYPE1_PROTO_INT   0x00000030  // Interrupt
+#define USB_TXTYPE1_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_TXTYPE1_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXINTERVAL1
+// register.
+//
+//*****************************************************************************
+#define USB_TXINTERVAL1_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_TXINTERVAL1_TXPOLL_M                                              \
+                                0x000000FF  // TX Polling
+#define USB_TXINTERVAL1_TXPOLL_S                                              \
+                                0
+#define USB_TXINTERVAL1_NAKLMT_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXTYPE1 register.
+//
+//*****************************************************************************
+#define USB_RXTYPE1_SPEED_M     0x000000C0  // Operating Speed
+#define USB_RXTYPE1_SPEED_DFLT  0x00000000  // Default
+#define USB_RXTYPE1_SPEED_HIGH  0x00000040  // High
+#define USB_RXTYPE1_SPEED_FULL  0x00000080  // Full
+#define USB_RXTYPE1_SPEED_LOW   0x000000C0  // Low
+#define USB_RXTYPE1_PROTO_M     0x00000030  // Protocol
+#define USB_RXTYPE1_PROTO_CTRL  0x00000000  // Control
+#define USB_RXTYPE1_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_RXTYPE1_PROTO_BULK  0x00000020  // Bulk
+#define USB_RXTYPE1_PROTO_INT   0x00000030  // Interrupt
+#define USB_RXTYPE1_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_RXTYPE1_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXINTERVAL1
+// register.
+//
+//*****************************************************************************
+#define USB_RXINTERVAL1_TXPOLL_M                                              \
+                                0x000000FF  // RX Polling
+#define USB_RXINTERVAL1_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_RXINTERVAL1_TXPOLL_S                                              \
+                                0
+#define USB_RXINTERVAL1_NAKLMT_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXMAXP2 register.
+//
+//*****************************************************************************
+#define USB_TXMAXP2_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_TXMAXP2_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRL2 register.
+//
+//*****************************************************************************
+#define USB_TXCSRL2_NAKTO       0x00000080  // NAK Timeout
+#define USB_TXCSRL2_CLRDT       0x00000040  // Clear Data Toggle
+#define USB_TXCSRL2_STALLED     0x00000020  // Endpoint Stalled
+#define USB_TXCSRL2_SETUP       0x00000010  // Setup Packet
+#define USB_TXCSRL2_STALL       0x00000010  // Send STALL
+#define USB_TXCSRL2_FLUSH       0x00000008  // Flush FIFO
+#define USB_TXCSRL2_ERROR       0x00000004  // Error
+#define USB_TXCSRL2_UNDRN       0x00000004  // Underrun
+#define USB_TXCSRL2_FIFONE      0x00000002  // FIFO Not Empty
+#define USB_TXCSRL2_TXRDY       0x00000001  // Transmit Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRH2 register.
+//
+//*****************************************************************************
+#define USB_TXCSRH2_AUTOSET     0x00000080  // Auto Set
+#define USB_TXCSRH2_ISO         0x00000040  // Isochronous Transfers
+#define USB_TXCSRH2_MODE        0x00000020  // Mode
+#define USB_TXCSRH2_DMAEN       0x00000010  // DMA Request Enable
+#define USB_TXCSRH2_FDT         0x00000008  // Force Data Toggle
+#define USB_TXCSRH2_DMAMOD      0x00000004  // DMA Request Mode
+#define USB_TXCSRH2_DTWE        0x00000002  // Data Toggle Write Enable
+#define USB_TXCSRH2_DT          0x00000001  // Data Toggle
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXMAXP2 register.
+//
+//*****************************************************************************
+#define USB_RXMAXP2_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_RXMAXP2_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRL2 register.
+//
+//*****************************************************************************
+#define USB_RXCSRL2_CLRDT       0x00000080  // Clear Data Toggle
+#define USB_RXCSRL2_STALLED     0x00000040  // Endpoint Stalled
+#define USB_RXCSRL2_REQPKT      0x00000020  // Request Packet
+#define USB_RXCSRL2_STALL       0x00000020  // Send STALL
+#define USB_RXCSRL2_FLUSH       0x00000010  // Flush FIFO
+#define USB_RXCSRL2_DATAERR     0x00000008  // Data Error
+#define USB_RXCSRL2_NAKTO       0x00000008  // NAK Timeout
+#define USB_RXCSRL2_ERROR       0x00000004  // Error
+#define USB_RXCSRL2_OVER        0x00000004  // Overrun
+#define USB_RXCSRL2_FULL        0x00000002  // FIFO Full
+#define USB_RXCSRL2_RXRDY       0x00000001  // Receive Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRH2 register.
+//
+//*****************************************************************************
+#define USB_RXCSRH2_AUTOCL      0x00000080  // Auto Clear
+#define USB_RXCSRH2_AUTORQ      0x00000040  // Auto Request
+#define USB_RXCSRH2_ISO         0x00000040  // Isochronous Transfers
+#define USB_RXCSRH2_DMAEN       0x00000020  // DMA Request Enable
+#define USB_RXCSRH2_DISNYET     0x00000010  // Disable NYET
+#define USB_RXCSRH2_PIDERR      0x00000010  // PID Error
+#define USB_RXCSRH2_DMAMOD      0x00000008  // DMA Request Mode
+#define USB_RXCSRH2_DTWE        0x00000004  // Data Toggle Write Enable
+#define USB_RXCSRH2_DT          0x00000002  // Data Toggle
+#define USB_RXCSRH2_INCOMPRX    0x00000001  // Incomplete RX Transmission
+                                            // Status
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCOUNT2 register.
+//
+//*****************************************************************************
+#define USB_RXCOUNT2_COUNT_M    0x00001FFF  // Receive Packet Count
+#define USB_RXCOUNT2_COUNT_S    0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXTYPE2 register.
+//
+//*****************************************************************************
+#define USB_TXTYPE2_SPEED_M     0x000000C0  // Operating Speed
+#define USB_TXTYPE2_SPEED_DFLT  0x00000000  // Default
+#define USB_TXTYPE2_SPEED_HIGH  0x00000040  // High
+#define USB_TXTYPE2_SPEED_FULL  0x00000080  // Full
+#define USB_TXTYPE2_SPEED_LOW   0x000000C0  // Low
+#define USB_TXTYPE2_PROTO_M     0x00000030  // Protocol
+#define USB_TXTYPE2_PROTO_CTRL  0x00000000  // Control
+#define USB_TXTYPE2_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_TXTYPE2_PROTO_BULK  0x00000020  // Bulk
+#define USB_TXTYPE2_PROTO_INT   0x00000030  // Interrupt
+#define USB_TXTYPE2_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_TXTYPE2_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXINTERVAL2
+// register.
+//
+//*****************************************************************************
+#define USB_TXINTERVAL2_TXPOLL_M                                              \
+                                0x000000FF  // TX Polling
+#define USB_TXINTERVAL2_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_TXINTERVAL2_NAKLMT_S                                              \
+                                0
+#define USB_TXINTERVAL2_TXPOLL_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXTYPE2 register.
+//
+//*****************************************************************************
+#define USB_RXTYPE2_SPEED_M     0x000000C0  // Operating Speed
+#define USB_RXTYPE2_SPEED_DFLT  0x00000000  // Default
+#define USB_RXTYPE2_SPEED_HIGH  0x00000040  // High
+#define USB_RXTYPE2_SPEED_FULL  0x00000080  // Full
+#define USB_RXTYPE2_SPEED_LOW   0x000000C0  // Low
+#define USB_RXTYPE2_PROTO_M     0x00000030  // Protocol
+#define USB_RXTYPE2_PROTO_CTRL  0x00000000  // Control
+#define USB_RXTYPE2_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_RXTYPE2_PROTO_BULK  0x00000020  // Bulk
+#define USB_RXTYPE2_PROTO_INT   0x00000030  // Interrupt
+#define USB_RXTYPE2_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_RXTYPE2_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXINTERVAL2
+// register.
+//
+//*****************************************************************************
+#define USB_RXINTERVAL2_TXPOLL_M                                              \
+                                0x000000FF  // RX Polling
+#define USB_RXINTERVAL2_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_RXINTERVAL2_TXPOLL_S                                              \
+                                0
+#define USB_RXINTERVAL2_NAKLMT_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXMAXP3 register.
+//
+//*****************************************************************************
+#define USB_TXMAXP3_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_TXMAXP3_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRL3 register.
+//
+//*****************************************************************************
+#define USB_TXCSRL3_NAKTO       0x00000080  // NAK Timeout
+#define USB_TXCSRL3_CLRDT       0x00000040  // Clear Data Toggle
+#define USB_TXCSRL3_STALLED     0x00000020  // Endpoint Stalled
+#define USB_TXCSRL3_SETUP       0x00000010  // Setup Packet
+#define USB_TXCSRL3_STALL       0x00000010  // Send STALL
+#define USB_TXCSRL3_FLUSH       0x00000008  // Flush FIFO
+#define USB_TXCSRL3_ERROR       0x00000004  // Error
+#define USB_TXCSRL3_UNDRN       0x00000004  // Underrun
+#define USB_TXCSRL3_FIFONE      0x00000002  // FIFO Not Empty
+#define USB_TXCSRL3_TXRDY       0x00000001  // Transmit Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRH3 register.
+//
+//*****************************************************************************
+#define USB_TXCSRH3_AUTOSET     0x00000080  // Auto Set
+#define USB_TXCSRH3_ISO         0x00000040  // Isochronous Transfers
+#define USB_TXCSRH3_MODE        0x00000020  // Mode
+#define USB_TXCSRH3_DMAEN       0x00000010  // DMA Request Enable
+#define USB_TXCSRH3_FDT         0x00000008  // Force Data Toggle
+#define USB_TXCSRH3_DMAMOD      0x00000004  // DMA Request Mode
+#define USB_TXCSRH3_DTWE        0x00000002  // Data Toggle Write Enable
+#define USB_TXCSRH3_DT          0x00000001  // Data Toggle
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXMAXP3 register.
+//
+//*****************************************************************************
+#define USB_RXMAXP3_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_RXMAXP3_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRL3 register.
+//
+//*****************************************************************************
+#define USB_RXCSRL3_CLRDT       0x00000080  // Clear Data Toggle
+#define USB_RXCSRL3_STALLED     0x00000040  // Endpoint Stalled
+#define USB_RXCSRL3_STALL       0x00000020  // Send STALL
+#define USB_RXCSRL3_REQPKT      0x00000020  // Request Packet
+#define USB_RXCSRL3_FLUSH       0x00000010  // Flush FIFO
+#define USB_RXCSRL3_DATAERR     0x00000008  // Data Error
+#define USB_RXCSRL3_NAKTO       0x00000008  // NAK Timeout
+#define USB_RXCSRL3_ERROR       0x00000004  // Error
+#define USB_RXCSRL3_OVER        0x00000004  // Overrun
+#define USB_RXCSRL3_FULL        0x00000002  // FIFO Full
+#define USB_RXCSRL3_RXRDY       0x00000001  // Receive Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRH3 register.
+//
+//*****************************************************************************
+#define USB_RXCSRH3_AUTOCL      0x00000080  // Auto Clear
+#define USB_RXCSRH3_AUTORQ      0x00000040  // Auto Request
+#define USB_RXCSRH3_ISO         0x00000040  // Isochronous Transfers
+#define USB_RXCSRH3_DMAEN       0x00000020  // DMA Request Enable
+#define USB_RXCSRH3_DISNYET     0x00000010  // Disable NYET
+#define USB_RXCSRH3_PIDERR      0x00000010  // PID Error
+#define USB_RXCSRH3_DMAMOD      0x00000008  // DMA Request Mode
+#define USB_RXCSRH3_DTWE        0x00000004  // Data Toggle Write Enable
+#define USB_RXCSRH3_DT          0x00000002  // Data Toggle
+#define USB_RXCSRH3_INCOMPRX    0x00000001  // Incomplete RX Transmission
+                                            // Status
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCOUNT3 register.
+//
+//*****************************************************************************
+#define USB_RXCOUNT3_COUNT_M    0x00001FFF  // Receive Packet Count
+#define USB_RXCOUNT3_COUNT_S    0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXTYPE3 register.
+//
+//*****************************************************************************
+#define USB_TXTYPE3_SPEED_M     0x000000C0  // Operating Speed
+#define USB_TXTYPE3_SPEED_DFLT  0x00000000  // Default
+#define USB_TXTYPE3_SPEED_HIGH  0x00000040  // High
+#define USB_TXTYPE3_SPEED_FULL  0x00000080  // Full
+#define USB_TXTYPE3_SPEED_LOW   0x000000C0  // Low
+#define USB_TXTYPE3_PROTO_M     0x00000030  // Protocol
+#define USB_TXTYPE3_PROTO_CTRL  0x00000000  // Control
+#define USB_TXTYPE3_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_TXTYPE3_PROTO_BULK  0x00000020  // Bulk
+#define USB_TXTYPE3_PROTO_INT   0x00000030  // Interrupt
+#define USB_TXTYPE3_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_TXTYPE3_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXINTERVAL3
+// register.
+//
+//*****************************************************************************
+#define USB_TXINTERVAL3_TXPOLL_M                                              \
+                                0x000000FF  // TX Polling
+#define USB_TXINTERVAL3_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_TXINTERVAL3_TXPOLL_S                                              \
+                                0
+#define USB_TXINTERVAL3_NAKLMT_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXTYPE3 register.
+//
+//*****************************************************************************
+#define USB_RXTYPE3_SPEED_M     0x000000C0  // Operating Speed
+#define USB_RXTYPE3_SPEED_DFLT  0x00000000  // Default
+#define USB_RXTYPE3_SPEED_HIGH  0x00000040  // High
+#define USB_RXTYPE3_SPEED_FULL  0x00000080  // Full
+#define USB_RXTYPE3_SPEED_LOW   0x000000C0  // Low
+#define USB_RXTYPE3_PROTO_M     0x00000030  // Protocol
+#define USB_RXTYPE3_PROTO_CTRL  0x00000000  // Control
+#define USB_RXTYPE3_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_RXTYPE3_PROTO_BULK  0x00000020  // Bulk
+#define USB_RXTYPE3_PROTO_INT   0x00000030  // Interrupt
+#define USB_RXTYPE3_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_RXTYPE3_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXINTERVAL3
+// register.
+//
+//*****************************************************************************
+#define USB_RXINTERVAL3_TXPOLL_M                                              \
+                                0x000000FF  // RX Polling
+#define USB_RXINTERVAL3_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_RXINTERVAL3_TXPOLL_S                                              \
+                                0
+#define USB_RXINTERVAL3_NAKLMT_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXMAXP4 register.
+//
+//*****************************************************************************
+#define USB_TXMAXP4_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_TXMAXP4_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRL4 register.
+//
+//*****************************************************************************
+#define USB_TXCSRL4_NAKTO       0x00000080  // NAK Timeout
+#define USB_TXCSRL4_CLRDT       0x00000040  // Clear Data Toggle
+#define USB_TXCSRL4_STALLED     0x00000020  // Endpoint Stalled
+#define USB_TXCSRL4_SETUP       0x00000010  // Setup Packet
+#define USB_TXCSRL4_STALL       0x00000010  // Send STALL
+#define USB_TXCSRL4_FLUSH       0x00000008  // Flush FIFO
+#define USB_TXCSRL4_ERROR       0x00000004  // Error
+#define USB_TXCSRL4_UNDRN       0x00000004  // Underrun
+#define USB_TXCSRL4_FIFONE      0x00000002  // FIFO Not Empty
+#define USB_TXCSRL4_TXRDY       0x00000001  // Transmit Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRH4 register.
+//
+//*****************************************************************************
+#define USB_TXCSRH4_AUTOSET     0x00000080  // Auto Set
+#define USB_TXCSRH4_ISO         0x00000040  // Isochronous Transfers
+#define USB_TXCSRH4_MODE        0x00000020  // Mode
+#define USB_TXCSRH4_DMAEN       0x00000010  // DMA Request Enable
+#define USB_TXCSRH4_FDT         0x00000008  // Force Data Toggle
+#define USB_TXCSRH4_DMAMOD      0x00000004  // DMA Request Mode
+#define USB_TXCSRH4_DTWE        0x00000002  // Data Toggle Write Enable
+#define USB_TXCSRH4_DT          0x00000001  // Data Toggle
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXMAXP4 register.
+//
+//*****************************************************************************
+#define USB_RXMAXP4_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_RXMAXP4_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRL4 register.
+//
+//*****************************************************************************
+#define USB_RXCSRL4_CLRDT       0x00000080  // Clear Data Toggle
+#define USB_RXCSRL4_STALLED     0x00000040  // Endpoint Stalled
+#define USB_RXCSRL4_STALL       0x00000020  // Send STALL
+#define USB_RXCSRL4_REQPKT      0x00000020  // Request Packet
+#define USB_RXCSRL4_FLUSH       0x00000010  // Flush FIFO
+#define USB_RXCSRL4_NAKTO       0x00000008  // NAK Timeout
+#define USB_RXCSRL4_DATAERR     0x00000008  // Data Error
+#define USB_RXCSRL4_OVER        0x00000004  // Overrun
+#define USB_RXCSRL4_ERROR       0x00000004  // Error
+#define USB_RXCSRL4_FULL        0x00000002  // FIFO Full
+#define USB_RXCSRL4_RXRDY       0x00000001  // Receive Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRH4 register.
+//
+//*****************************************************************************
+#define USB_RXCSRH4_AUTOCL      0x00000080  // Auto Clear
+#define USB_RXCSRH4_AUTORQ      0x00000040  // Auto Request
+#define USB_RXCSRH4_ISO         0x00000040  // Isochronous Transfers
+#define USB_RXCSRH4_DMAEN       0x00000020  // DMA Request Enable
+#define USB_RXCSRH4_DISNYET     0x00000010  // Disable NYET
+#define USB_RXCSRH4_PIDERR      0x00000010  // PID Error
+#define USB_RXCSRH4_DMAMOD      0x00000008  // DMA Request Mode
+#define USB_RXCSRH4_DTWE        0x00000004  // Data Toggle Write Enable
+#define USB_RXCSRH4_DT          0x00000002  // Data Toggle
+#define USB_RXCSRH4_INCOMPRX    0x00000001  // Incomplete RX Transmission
+                                            // Status
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCOUNT4 register.
+//
+//*****************************************************************************
+#define USB_RXCOUNT4_COUNT_M    0x00001FFF  // Receive Packet Count
+#define USB_RXCOUNT4_COUNT_S    0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXTYPE4 register.
+//
+//*****************************************************************************
+#define USB_TXTYPE4_SPEED_M     0x000000C0  // Operating Speed
+#define USB_TXTYPE4_SPEED_DFLT  0x00000000  // Default
+#define USB_TXTYPE4_SPEED_HIGH  0x00000040  // High
+#define USB_TXTYPE4_SPEED_FULL  0x00000080  // Full
+#define USB_TXTYPE4_SPEED_LOW   0x000000C0  // Low
+#define USB_TXTYPE4_PROTO_M     0x00000030  // Protocol
+#define USB_TXTYPE4_PROTO_CTRL  0x00000000  // Control
+#define USB_TXTYPE4_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_TXTYPE4_PROTO_BULK  0x00000020  // Bulk
+#define USB_TXTYPE4_PROTO_INT   0x00000030  // Interrupt
+#define USB_TXTYPE4_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_TXTYPE4_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXINTERVAL4
+// register.
+//
+//*****************************************************************************
+#define USB_TXINTERVAL4_TXPOLL_M                                              \
+                                0x000000FF  // TX Polling
+#define USB_TXINTERVAL4_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_TXINTERVAL4_NAKLMT_S                                              \
+                                0
+#define USB_TXINTERVAL4_TXPOLL_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXTYPE4 register.
+//
+//*****************************************************************************
+#define USB_RXTYPE4_SPEED_M     0x000000C0  // Operating Speed
+#define USB_RXTYPE4_SPEED_DFLT  0x00000000  // Default
+#define USB_RXTYPE4_SPEED_HIGH  0x00000040  // High
+#define USB_RXTYPE4_SPEED_FULL  0x00000080  // Full
+#define USB_RXTYPE4_SPEED_LOW   0x000000C0  // Low
+#define USB_RXTYPE4_PROTO_M     0x00000030  // Protocol
+#define USB_RXTYPE4_PROTO_CTRL  0x00000000  // Control
+#define USB_RXTYPE4_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_RXTYPE4_PROTO_BULK  0x00000020  // Bulk
+#define USB_RXTYPE4_PROTO_INT   0x00000030  // Interrupt
+#define USB_RXTYPE4_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_RXTYPE4_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXINTERVAL4
+// register.
+//
+//*****************************************************************************
+#define USB_RXINTERVAL4_TXPOLL_M                                              \
+                                0x000000FF  // RX Polling
+#define USB_RXINTERVAL4_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_RXINTERVAL4_NAKLMT_S                                              \
+                                0
+#define USB_RXINTERVAL4_TXPOLL_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXMAXP5 register.
+//
+//*****************************************************************************
+#define USB_TXMAXP5_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_TXMAXP5_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRL5 register.
+//
+//*****************************************************************************
+#define USB_TXCSRL5_NAKTO       0x00000080  // NAK Timeout
+#define USB_TXCSRL5_CLRDT       0x00000040  // Clear Data Toggle
+#define USB_TXCSRL5_STALLED     0x00000020  // Endpoint Stalled
+#define USB_TXCSRL5_SETUP       0x00000010  // Setup Packet
+#define USB_TXCSRL5_STALL       0x00000010  // Send STALL
+#define USB_TXCSRL5_FLUSH       0x00000008  // Flush FIFO
+#define USB_TXCSRL5_ERROR       0x00000004  // Error
+#define USB_TXCSRL5_UNDRN       0x00000004  // Underrun
+#define USB_TXCSRL5_FIFONE      0x00000002  // FIFO Not Empty
+#define USB_TXCSRL5_TXRDY       0x00000001  // Transmit Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRH5 register.
+//
+//*****************************************************************************
+#define USB_TXCSRH5_AUTOSET     0x00000080  // Auto Set
+#define USB_TXCSRH5_ISO         0x00000040  // Isochronous Transfers
+#define USB_TXCSRH5_MODE        0x00000020  // Mode
+#define USB_TXCSRH5_DMAEN       0x00000010  // DMA Request Enable
+#define USB_TXCSRH5_FDT         0x00000008  // Force Data Toggle
+#define USB_TXCSRH5_DMAMOD      0x00000004  // DMA Request Mode
+#define USB_TXCSRH5_DTWE        0x00000002  // Data Toggle Write Enable
+#define USB_TXCSRH5_DT          0x00000001  // Data Toggle
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXMAXP5 register.
+//
+//*****************************************************************************
+#define USB_RXMAXP5_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_RXMAXP5_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRL5 register.
+//
+//*****************************************************************************
+#define USB_RXCSRL5_CLRDT       0x00000080  // Clear Data Toggle
+#define USB_RXCSRL5_STALLED     0x00000040  // Endpoint Stalled
+#define USB_RXCSRL5_STALL       0x00000020  // Send STALL
+#define USB_RXCSRL5_REQPKT      0x00000020  // Request Packet
+#define USB_RXCSRL5_FLUSH       0x00000010  // Flush FIFO
+#define USB_RXCSRL5_NAKTO       0x00000008  // NAK Timeout
+#define USB_RXCSRL5_DATAERR     0x00000008  // Data Error
+#define USB_RXCSRL5_ERROR       0x00000004  // Error
+#define USB_RXCSRL5_OVER        0x00000004  // Overrun
+#define USB_RXCSRL5_FULL        0x00000002  // FIFO Full
+#define USB_RXCSRL5_RXRDY       0x00000001  // Receive Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRH5 register.
+//
+//*****************************************************************************
+#define USB_RXCSRH5_AUTOCL      0x00000080  // Auto Clear
+#define USB_RXCSRH5_AUTORQ      0x00000040  // Auto Request
+#define USB_RXCSRH5_ISO         0x00000040  // Isochronous Transfers
+#define USB_RXCSRH5_DMAEN       0x00000020  // DMA Request Enable
+#define USB_RXCSRH5_DISNYET     0x00000010  // Disable NYET
+#define USB_RXCSRH5_PIDERR      0x00000010  // PID Error
+#define USB_RXCSRH5_DMAMOD      0x00000008  // DMA Request Mode
+#define USB_RXCSRH5_DTWE        0x00000004  // Data Toggle Write Enable
+#define USB_RXCSRH5_DT          0x00000002  // Data Toggle
+#define USB_RXCSRH5_INCOMPRX    0x00000001  // Incomplete RX Transmission
+                                            // Status
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCOUNT5 register.
+//
+//*****************************************************************************
+#define USB_RXCOUNT5_COUNT_M    0x00001FFF  // Receive Packet Count
+#define USB_RXCOUNT5_COUNT_S    0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXTYPE5 register.
+//
+//*****************************************************************************
+#define USB_TXTYPE5_SPEED_M     0x000000C0  // Operating Speed
+#define USB_TXTYPE5_SPEED_DFLT  0x00000000  // Default
+#define USB_TXTYPE5_SPEED_HIGH  0x00000040  // High
+#define USB_TXTYPE5_SPEED_FULL  0x00000080  // Full
+#define USB_TXTYPE5_SPEED_LOW   0x000000C0  // Low
+#define USB_TXTYPE5_PROTO_M     0x00000030  // Protocol
+#define USB_TXTYPE5_PROTO_CTRL  0x00000000  // Control
+#define USB_TXTYPE5_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_TXTYPE5_PROTO_BULK  0x00000020  // Bulk
+#define USB_TXTYPE5_PROTO_INT   0x00000030  // Interrupt
+#define USB_TXTYPE5_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_TXTYPE5_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXINTERVAL5
+// register.
+//
+//*****************************************************************************
+#define USB_TXINTERVAL5_TXPOLL_M                                              \
+                                0x000000FF  // TX Polling
+#define USB_TXINTERVAL5_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_TXINTERVAL5_NAKLMT_S                                              \
+                                0
+#define USB_TXINTERVAL5_TXPOLL_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXTYPE5 register.
+//
+//*****************************************************************************
+#define USB_RXTYPE5_SPEED_M     0x000000C0  // Operating Speed
+#define USB_RXTYPE5_SPEED_DFLT  0x00000000  // Default
+#define USB_RXTYPE5_SPEED_HIGH  0x00000040  // High
+#define USB_RXTYPE5_SPEED_FULL  0x00000080  // Full
+#define USB_RXTYPE5_SPEED_LOW   0x000000C0  // Low
+#define USB_RXTYPE5_PROTO_M     0x00000030  // Protocol
+#define USB_RXTYPE5_PROTO_CTRL  0x00000000  // Control
+#define USB_RXTYPE5_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_RXTYPE5_PROTO_BULK  0x00000020  // Bulk
+#define USB_RXTYPE5_PROTO_INT   0x00000030  // Interrupt
+#define USB_RXTYPE5_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_RXTYPE5_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXINTERVAL5
+// register.
+//
+//*****************************************************************************
+#define USB_RXINTERVAL5_TXPOLL_M                                              \
+                                0x000000FF  // RX Polling
+#define USB_RXINTERVAL5_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_RXINTERVAL5_TXPOLL_S                                              \
+                                0
+#define USB_RXINTERVAL5_NAKLMT_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXMAXP6 register.
+//
+//*****************************************************************************
+#define USB_TXMAXP6_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_TXMAXP6_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRL6 register.
+//
+//*****************************************************************************
+#define USB_TXCSRL6_NAKTO       0x00000080  // NAK Timeout
+#define USB_TXCSRL6_CLRDT       0x00000040  // Clear Data Toggle
+#define USB_TXCSRL6_STALLED     0x00000020  // Endpoint Stalled
+#define USB_TXCSRL6_STALL       0x00000010  // Send STALL
+#define USB_TXCSRL6_SETUP       0x00000010  // Setup Packet
+#define USB_TXCSRL6_FLUSH       0x00000008  // Flush FIFO
+#define USB_TXCSRL6_ERROR       0x00000004  // Error
+#define USB_TXCSRL6_UNDRN       0x00000004  // Underrun
+#define USB_TXCSRL6_FIFONE      0x00000002  // FIFO Not Empty
+#define USB_TXCSRL6_TXRDY       0x00000001  // Transmit Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRH6 register.
+//
+//*****************************************************************************
+#define USB_TXCSRH6_AUTOSET     0x00000080  // Auto Set
+#define USB_TXCSRH6_ISO         0x00000040  // Isochronous Transfers
+#define USB_TXCSRH6_MODE        0x00000020  // Mode
+#define USB_TXCSRH6_DMAEN       0x00000010  // DMA Request Enable
+#define USB_TXCSRH6_FDT         0x00000008  // Force Data Toggle
+#define USB_TXCSRH6_DMAMOD      0x00000004  // DMA Request Mode
+#define USB_TXCSRH6_DTWE        0x00000002  // Data Toggle Write Enable
+#define USB_TXCSRH6_DT          0x00000001  // Data Toggle
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXMAXP6 register.
+//
+//*****************************************************************************
+#define USB_RXMAXP6_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_RXMAXP6_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRL6 register.
+//
+//*****************************************************************************
+#define USB_RXCSRL6_CLRDT       0x00000080  // Clear Data Toggle
+#define USB_RXCSRL6_STALLED     0x00000040  // Endpoint Stalled
+#define USB_RXCSRL6_REQPKT      0x00000020  // Request Packet
+#define USB_RXCSRL6_STALL       0x00000020  // Send STALL
+#define USB_RXCSRL6_FLUSH       0x00000010  // Flush FIFO
+#define USB_RXCSRL6_NAKTO       0x00000008  // NAK Timeout
+#define USB_RXCSRL6_DATAERR     0x00000008  // Data Error
+#define USB_RXCSRL6_ERROR       0x00000004  // Error
+#define USB_RXCSRL6_OVER        0x00000004  // Overrun
+#define USB_RXCSRL6_FULL        0x00000002  // FIFO Full
+#define USB_RXCSRL6_RXRDY       0x00000001  // Receive Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRH6 register.
+//
+//*****************************************************************************
+#define USB_RXCSRH6_AUTOCL      0x00000080  // Auto Clear
+#define USB_RXCSRH6_AUTORQ      0x00000040  // Auto Request
+#define USB_RXCSRH6_ISO         0x00000040  // Isochronous Transfers
+#define USB_RXCSRH6_DMAEN       0x00000020  // DMA Request Enable
+#define USB_RXCSRH6_DISNYET     0x00000010  // Disable NYET
+#define USB_RXCSRH6_PIDERR      0x00000010  // PID Error
+#define USB_RXCSRH6_DMAMOD      0x00000008  // DMA Request Mode
+#define USB_RXCSRH6_DTWE        0x00000004  // Data Toggle Write Enable
+#define USB_RXCSRH6_DT          0x00000002  // Data Toggle
+#define USB_RXCSRH6_INCOMPRX    0x00000001  // Incomplete RX Transmission
+                                            // Status
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCOUNT6 register.
+//
+//*****************************************************************************
+#define USB_RXCOUNT6_COUNT_M    0x00001FFF  // Receive Packet Count
+#define USB_RXCOUNT6_COUNT_S    0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXTYPE6 register.
+//
+//*****************************************************************************
+#define USB_TXTYPE6_SPEED_M     0x000000C0  // Operating Speed
+#define USB_TXTYPE6_SPEED_DFLT  0x00000000  // Default
+#define USB_TXTYPE6_SPEED_HIGH  0x00000040  // High
+#define USB_TXTYPE6_SPEED_FULL  0x00000080  // Full
+#define USB_TXTYPE6_SPEED_LOW   0x000000C0  // Low
+#define USB_TXTYPE6_PROTO_M     0x00000030  // Protocol
+#define USB_TXTYPE6_PROTO_CTRL  0x00000000  // Control
+#define USB_TXTYPE6_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_TXTYPE6_PROTO_BULK  0x00000020  // Bulk
+#define USB_TXTYPE6_PROTO_INT   0x00000030  // Interrupt
+#define USB_TXTYPE6_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_TXTYPE6_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXINTERVAL6
+// register.
+//
+//*****************************************************************************
+#define USB_TXINTERVAL6_TXPOLL_M                                              \
+                                0x000000FF  // TX Polling
+#define USB_TXINTERVAL6_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_TXINTERVAL6_TXPOLL_S                                              \
+                                0
+#define USB_TXINTERVAL6_NAKLMT_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXTYPE6 register.
+//
+//*****************************************************************************
+#define USB_RXTYPE6_SPEED_M     0x000000C0  // Operating Speed
+#define USB_RXTYPE6_SPEED_DFLT  0x00000000  // Default
+#define USB_RXTYPE6_SPEED_HIGH  0x00000040  // High
+#define USB_RXTYPE6_SPEED_FULL  0x00000080  // Full
+#define USB_RXTYPE6_SPEED_LOW   0x000000C0  // Low
+#define USB_RXTYPE6_PROTO_M     0x00000030  // Protocol
+#define USB_RXTYPE6_PROTO_CTRL  0x00000000  // Control
+#define USB_RXTYPE6_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_RXTYPE6_PROTO_BULK  0x00000020  // Bulk
+#define USB_RXTYPE6_PROTO_INT   0x00000030  // Interrupt
+#define USB_RXTYPE6_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_RXTYPE6_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXINTERVAL6
+// register.
+//
+//*****************************************************************************
+#define USB_RXINTERVAL6_TXPOLL_M                                              \
+                                0x000000FF  // RX Polling
+#define USB_RXINTERVAL6_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_RXINTERVAL6_NAKLMT_S                                              \
+                                0
+#define USB_RXINTERVAL6_TXPOLL_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXMAXP7 register.
+//
+//*****************************************************************************
+#define USB_TXMAXP7_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_TXMAXP7_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRL7 register.
+//
+//*****************************************************************************
+#define USB_TXCSRL7_NAKTO       0x00000080  // NAK Timeout
+#define USB_TXCSRL7_CLRDT       0x00000040  // Clear Data Toggle
+#define USB_TXCSRL7_STALLED     0x00000020  // Endpoint Stalled
+#define USB_TXCSRL7_STALL       0x00000010  // Send STALL
+#define USB_TXCSRL7_SETUP       0x00000010  // Setup Packet
+#define USB_TXCSRL7_FLUSH       0x00000008  // Flush FIFO
+#define USB_TXCSRL7_ERROR       0x00000004  // Error
+#define USB_TXCSRL7_UNDRN       0x00000004  // Underrun
+#define USB_TXCSRL7_FIFONE      0x00000002  // FIFO Not Empty
+#define USB_TXCSRL7_TXRDY       0x00000001  // Transmit Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXCSRH7 register.
+//
+//*****************************************************************************
+#define USB_TXCSRH7_AUTOSET     0x00000080  // Auto Set
+#define USB_TXCSRH7_ISO         0x00000040  // Isochronous Transfers
+#define USB_TXCSRH7_MODE        0x00000020  // Mode
+#define USB_TXCSRH7_DMAEN       0x00000010  // DMA Request Enable
+#define USB_TXCSRH7_FDT         0x00000008  // Force Data Toggle
+#define USB_TXCSRH7_DMAMOD      0x00000004  // DMA Request Mode
+#define USB_TXCSRH7_DTWE        0x00000002  // Data Toggle Write Enable
+#define USB_TXCSRH7_DT          0x00000001  // Data Toggle
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXMAXP7 register.
+//
+//*****************************************************************************
+#define USB_RXMAXP7_MAXLOAD_M   0x000007FF  // Maximum Payload
+#define USB_RXMAXP7_MAXLOAD_S   0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRL7 register.
+//
+//*****************************************************************************
+#define USB_RXCSRL7_CLRDT       0x00000080  // Clear Data Toggle
+#define USB_RXCSRL7_STALLED     0x00000040  // Endpoint Stalled
+#define USB_RXCSRL7_REQPKT      0x00000020  // Request Packet
+#define USB_RXCSRL7_STALL       0x00000020  // Send STALL
+#define USB_RXCSRL7_FLUSH       0x00000010  // Flush FIFO
+#define USB_RXCSRL7_DATAERR     0x00000008  // Data Error
+#define USB_RXCSRL7_NAKTO       0x00000008  // NAK Timeout
+#define USB_RXCSRL7_ERROR       0x00000004  // Error
+#define USB_RXCSRL7_OVER        0x00000004  // Overrun
+#define USB_RXCSRL7_FULL        0x00000002  // FIFO Full
+#define USB_RXCSRL7_RXRDY       0x00000001  // Receive Packet Ready
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCSRH7 register.
+//
+//*****************************************************************************
+#define USB_RXCSRH7_AUTOCL      0x00000080  // Auto Clear
+#define USB_RXCSRH7_ISO         0x00000040  // Isochronous Transfers
+#define USB_RXCSRH7_AUTORQ      0x00000040  // Auto Request
+#define USB_RXCSRH7_DMAEN       0x00000020  // DMA Request Enable
+#define USB_RXCSRH7_PIDERR      0x00000010  // PID Error
+#define USB_RXCSRH7_DISNYET     0x00000010  // Disable NYET
+#define USB_RXCSRH7_DMAMOD      0x00000008  // DMA Request Mode
+#define USB_RXCSRH7_DTWE        0x00000004  // Data Toggle Write Enable
+#define USB_RXCSRH7_DT          0x00000002  // Data Toggle
+#define USB_RXCSRH7_INCOMPRX    0x00000001  // Incomplete RX Transmission
+                                            // Status
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXCOUNT7 register.
+//
+//*****************************************************************************
+#define USB_RXCOUNT7_COUNT_M    0x00001FFF  // Receive Packet Count
+#define USB_RXCOUNT7_COUNT_S    0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXTYPE7 register.
+//
+//*****************************************************************************
+#define USB_TXTYPE7_SPEED_M     0x000000C0  // Operating Speed
+#define USB_TXTYPE7_SPEED_DFLT  0x00000000  // Default
+#define USB_TXTYPE7_SPEED_HIGH  0x00000040  // High
+#define USB_TXTYPE7_SPEED_FULL  0x00000080  // Full
+#define USB_TXTYPE7_SPEED_LOW   0x000000C0  // Low
+#define USB_TXTYPE7_PROTO_M     0x00000030  // Protocol
+#define USB_TXTYPE7_PROTO_CTRL  0x00000000  // Control
+#define USB_TXTYPE7_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_TXTYPE7_PROTO_BULK  0x00000020  // Bulk
+#define USB_TXTYPE7_PROTO_INT   0x00000030  // Interrupt
+#define USB_TXTYPE7_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_TXTYPE7_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXINTERVAL7
+// register.
+//
+//*****************************************************************************
+#define USB_TXINTERVAL7_TXPOLL_M                                              \
+                                0x000000FF  // TX Polling
+#define USB_TXINTERVAL7_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_TXINTERVAL7_NAKLMT_S                                              \
+                                0
+#define USB_TXINTERVAL7_TXPOLL_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXTYPE7 register.
+//
+//*****************************************************************************
+#define USB_RXTYPE7_SPEED_M     0x000000C0  // Operating Speed
+#define USB_RXTYPE7_SPEED_DFLT  0x00000000  // Default
+#define USB_RXTYPE7_SPEED_HIGH  0x00000040  // High
+#define USB_RXTYPE7_SPEED_FULL  0x00000080  // Full
+#define USB_RXTYPE7_SPEED_LOW   0x000000C0  // Low
+#define USB_RXTYPE7_PROTO_M     0x00000030  // Protocol
+#define USB_RXTYPE7_PROTO_CTRL  0x00000000  // Control
+#define USB_RXTYPE7_PROTO_ISOC  0x00000010  // Isochronous
+#define USB_RXTYPE7_PROTO_BULK  0x00000020  // Bulk
+#define USB_RXTYPE7_PROTO_INT   0x00000030  // Interrupt
+#define USB_RXTYPE7_TEP_M       0x0000000F  // Target Endpoint Number
+#define USB_RXTYPE7_TEP_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXINTERVAL7
+// register.
+//
+//*****************************************************************************
+#define USB_RXINTERVAL7_TXPOLL_M                                              \
+                                0x000000FF  // RX Polling
+#define USB_RXINTERVAL7_NAKLMT_M                                              \
+                                0x000000FF  // NAK Limit
+#define USB_RXINTERVAL7_NAKLMT_S                                              \
+                                0
+#define USB_RXINTERVAL7_TXPOLL_S                                              \
+                                0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMAINTR register.
+//
+//*****************************************************************************
+#define USB_DMAINTR_CH7         0x00000080  // Channel 7 DMA Interrupt
+#define USB_DMAINTR_CH6         0x00000040  // Channel 6 DMA Interrupt
+#define USB_DMAINTR_CH5         0x00000020  // Channel 5 DMA Interrupt
+#define USB_DMAINTR_CH4         0x00000010  // Channel 4 DMA Interrupt
+#define USB_DMAINTR_CH3         0x00000008  // Channel 3 DMA Interrupt
+#define USB_DMAINTR_CH2         0x00000004  // Channel 2 DMA Interrupt
+#define USB_DMAINTR_CH1         0x00000002  // Channel 1 DMA Interrupt
+#define USB_DMAINTR_CH0         0x00000001  // Channel 0 DMA Interrupt
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACTL0 register.
+//
+//*****************************************************************************
+#define USB_DMACTL0_BRSTM_M     0x00000600  // Burst Mode
+#define USB_DMACTL0_BRSTM_ANY   0x00000000  // Bursts of unspecified length
+#define USB_DMACTL0_BRSTM_INC4  0x00000200  // INCR4 or unspecified length
+#define USB_DMACTL0_BRSTM_INC8  0x00000400  // INCR8, INCR4 or unspecified
+                                            // length
+#define USB_DMACTL0_BRSTM_INC16 0x00000600  // INCR16, INCR8, INCR4 or
+                                            // unspecified length
+#define USB_DMACTL0_ERR         0x00000100  // Bus Error Bit
+#define USB_DMACTL0_EP_M        0x000000F0  // Endpoint number
+#define USB_DMACTL0_IE          0x00000008  // DMA Interrupt Enable
+#define USB_DMACTL0_MODE        0x00000004  // DMA Transfer Mode
+#define USB_DMACTL0_DIR         0x00000002  // DMA Direction
+#define USB_DMACTL0_ENABLE      0x00000001  // DMA Transfer Enable
+#define USB_DMACTL0_EP_S        4
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMAADDR0 register.
+//
+//*****************************************************************************
+#define USB_DMAADDR0_ADDR_M     0xFFFFFFFC  // DMA Address
+#define USB_DMAADDR0_ADDR_S     2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACOUNT0
+// register.
+//
+//*****************************************************************************
+#define USB_DMACOUNT0_COUNT_M   0xFFFFFFFC  // DMA Count
+#define USB_DMACOUNT0_COUNT_S   2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACTL1 register.
+//
+//*****************************************************************************
+#define USB_DMACTL1_BRSTM_M     0x00000600  // Burst Mode
+#define USB_DMACTL1_BRSTM_ANY   0x00000000  // Bursts of unspecified length
+#define USB_DMACTL1_BRSTM_INC4  0x00000200  // INCR4 or unspecified length
+#define USB_DMACTL1_BRSTM_INC8  0x00000400  // INCR8, INCR4 or unspecified
+                                            // length
+#define USB_DMACTL1_BRSTM_INC16 0x00000600  // INCR16, INCR8, INCR4 or
+                                            // unspecified length
+#define USB_DMACTL1_ERR         0x00000100  // Bus Error Bit
+#define USB_DMACTL1_EP_M        0x000000F0  // Endpoint number
+#define USB_DMACTL1_IE          0x00000008  // DMA Interrupt Enable
+#define USB_DMACTL1_MODE        0x00000004  // DMA Transfer Mode
+#define USB_DMACTL1_DIR         0x00000002  // DMA Direction
+#define USB_DMACTL1_ENABLE      0x00000001  // DMA Transfer Enable
+#define USB_DMACTL1_EP_S        4
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMAADDR1 register.
+//
+//*****************************************************************************
+#define USB_DMAADDR1_ADDR_M     0xFFFFFFFC  // DMA Address
+#define USB_DMAADDR1_ADDR_S     2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACOUNT1
+// register.
+//
+//*****************************************************************************
+#define USB_DMACOUNT1_COUNT_M   0xFFFFFFFC  // DMA Count
+#define USB_DMACOUNT1_COUNT_S   2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACTL2 register.
+//
+//*****************************************************************************
+#define USB_DMACTL2_BRSTM_M     0x00000600  // Burst Mode
+#define USB_DMACTL2_BRSTM_ANY   0x00000000  // Bursts of unspecified length
+#define USB_DMACTL2_BRSTM_INC4  0x00000200  // INCR4 or unspecified length
+#define USB_DMACTL2_BRSTM_INC8  0x00000400  // INCR8, INCR4 or unspecified
+                                            // length
+#define USB_DMACTL2_BRSTM_INC16 0x00000600  // INCR16, INCR8, INCR4 or
+                                            // unspecified length
+#define USB_DMACTL2_ERR         0x00000100  // Bus Error Bit
+#define USB_DMACTL2_EP_M        0x000000F0  // Endpoint number
+#define USB_DMACTL2_IE          0x00000008  // DMA Interrupt Enable
+#define USB_DMACTL2_MODE        0x00000004  // DMA Transfer Mode
+#define USB_DMACTL2_DIR         0x00000002  // DMA Direction
+#define USB_DMACTL2_ENABLE      0x00000001  // DMA Transfer Enable
+#define USB_DMACTL2_EP_S        4
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMAADDR2 register.
+//
+//*****************************************************************************
+#define USB_DMAADDR2_ADDR_M     0xFFFFFFFC  // DMA Address
+#define USB_DMAADDR2_ADDR_S     2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACOUNT2
+// register.
+//
+//*****************************************************************************
+#define USB_DMACOUNT2_COUNT_M   0xFFFFFFFC  // DMA Count
+#define USB_DMACOUNT2_COUNT_S   2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACTL3 register.
+//
+//*****************************************************************************
+#define USB_DMACTL3_BRSTM_M     0x00000600  // Burst Mode
+#define USB_DMACTL3_BRSTM_ANY   0x00000000  // Bursts of unspecified length
+#define USB_DMACTL3_BRSTM_INC4  0x00000200  // INCR4 or unspecified length
+#define USB_DMACTL3_BRSTM_INC8  0x00000400  // INCR8, INCR4 or unspecified
+                                            // length
+#define USB_DMACTL3_BRSTM_INC16 0x00000600  // INCR16, INCR8, INCR4 or
+                                            // unspecified length
+#define USB_DMACTL3_ERR         0x00000100  // Bus Error Bit
+#define USB_DMACTL3_EP_M        0x000000F0  // Endpoint number
+#define USB_DMACTL3_IE          0x00000008  // DMA Interrupt Enable
+#define USB_DMACTL3_MODE        0x00000004  // DMA Transfer Mode
+#define USB_DMACTL3_DIR         0x00000002  // DMA Direction
+#define USB_DMACTL3_ENABLE      0x00000001  // DMA Transfer Enable
+#define USB_DMACTL3_EP_S        4
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMAADDR3 register.
+//
+//*****************************************************************************
+#define USB_DMAADDR3_ADDR_M     0xFFFFFFFC  // DMA Address
+#define USB_DMAADDR3_ADDR_S     2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACOUNT3
+// register.
+//
+//*****************************************************************************
+#define USB_DMACOUNT3_COUNT_M   0xFFFFFFFC  // DMA Count
+#define USB_DMACOUNT3_COUNT_S   2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACTL4 register.
+//
+//*****************************************************************************
+#define USB_DMACTL4_BRSTM_M     0x00000600  // Burst Mode
+#define USB_DMACTL4_BRSTM_ANY   0x00000000  // Bursts of unspecified length
+#define USB_DMACTL4_BRSTM_INC4  0x00000200  // INCR4 or unspecified length
+#define USB_DMACTL4_BRSTM_INC8  0x00000400  // INCR8, INCR4 or unspecified
+                                            // length
+#define USB_DMACTL4_BRSTM_INC16 0x00000600  // INCR16, INCR8, INCR4 or
+                                            // unspecified length
+#define USB_DMACTL4_ERR         0x00000100  // Bus Error Bit
+#define USB_DMACTL4_EP_M        0x000000F0  // Endpoint number
+#define USB_DMACTL4_IE          0x00000008  // DMA Interrupt Enable
+#define USB_DMACTL4_MODE        0x00000004  // DMA Transfer Mode
+#define USB_DMACTL4_DIR         0x00000002  // DMA Direction
+#define USB_DMACTL4_ENABLE      0x00000001  // DMA Transfer Enable
+#define USB_DMACTL4_EP_S        4
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMAADDR4 register.
+//
+//*****************************************************************************
+#define USB_DMAADDR4_ADDR_M     0xFFFFFFFC  // DMA Address
+#define USB_DMAADDR4_ADDR_S     2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACOUNT4
+// register.
+//
+//*****************************************************************************
+#define USB_DMACOUNT4_COUNT_M   0xFFFFFFFC  // DMA Count
+#define USB_DMACOUNT4_COUNT_S   2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACTL5 register.
+//
+//*****************************************************************************
+#define USB_DMACTL5_BRSTM_M     0x00000600  // Burst Mode
+#define USB_DMACTL5_BRSTM_ANY   0x00000000  // Bursts of unspecified length
+#define USB_DMACTL5_BRSTM_INC4  0x00000200  // INCR4 or unspecified length
+#define USB_DMACTL5_BRSTM_INC8  0x00000400  // INCR8, INCR4 or unspecified
+                                            // length
+#define USB_DMACTL5_BRSTM_INC16 0x00000600  // INCR16, INCR8, INCR4 or
+                                            // unspecified length
+#define USB_DMACTL5_ERR         0x00000100  // Bus Error Bit
+#define USB_DMACTL5_EP_M        0x000000F0  // Endpoint number
+#define USB_DMACTL5_IE          0x00000008  // DMA Interrupt Enable
+#define USB_DMACTL5_MODE        0x00000004  // DMA Transfer Mode
+#define USB_DMACTL5_DIR         0x00000002  // DMA Direction
+#define USB_DMACTL5_ENABLE      0x00000001  // DMA Transfer Enable
+#define USB_DMACTL5_EP_S        4
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMAADDR5 register.
+//
+//*****************************************************************************
+#define USB_DMAADDR5_ADDR_M     0xFFFFFFFC  // DMA Address
+#define USB_DMAADDR5_ADDR_S     2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACOUNT5
+// register.
+//
+//*****************************************************************************
+#define USB_DMACOUNT5_COUNT_M   0xFFFFFFFC  // DMA Count
+#define USB_DMACOUNT5_COUNT_S   2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACTL6 register.
+//
+//*****************************************************************************
+#define USB_DMACTL6_BRSTM_M     0x00000600  // Burst Mode
+#define USB_DMACTL6_BRSTM_ANY   0x00000000  // Bursts of unspecified length
+#define USB_DMACTL6_BRSTM_INC4  0x00000200  // INCR4 or unspecified length
+#define USB_DMACTL6_BRSTM_INC8  0x00000400  // INCR8, INCR4 or unspecified
+                                            // length
+#define USB_DMACTL6_BRSTM_INC16 0x00000600  // INCR16, INCR8, INCR4 or
+                                            // unspecified length
+#define USB_DMACTL6_ERR         0x00000100  // Bus Error Bit
+#define USB_DMACTL6_EP_M        0x000000F0  // Endpoint number
+#define USB_DMACTL6_IE          0x00000008  // DMA Interrupt Enable
+#define USB_DMACTL6_MODE        0x00000004  // DMA Transfer Mode
+#define USB_DMACTL6_DIR         0x00000002  // DMA Direction
+#define USB_DMACTL6_ENABLE      0x00000001  // DMA Transfer Enable
+#define USB_DMACTL6_EP_S        4
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMAADDR6 register.
+//
+//*****************************************************************************
+#define USB_DMAADDR6_ADDR_M     0xFFFFFFFC  // DMA Address
+#define USB_DMAADDR6_ADDR_S     2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACOUNT6
+// register.
+//
+//*****************************************************************************
+#define USB_DMACOUNT6_COUNT_M   0xFFFFFFFC  // DMA Count
+#define USB_DMACOUNT6_COUNT_S   2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACTL7 register.
+//
+//*****************************************************************************
+#define USB_DMACTL7_BRSTM_M     0x00000600  // Burst Mode
+#define USB_DMACTL7_BRSTM_ANY   0x00000000  // Bursts of unspecified length
+#define USB_DMACTL7_BRSTM_INC4  0x00000200  // INCR4 or unspecified length
+#define USB_DMACTL7_BRSTM_INC8  0x00000400  // INCR8, INCR4 or unspecified
+                                            // length
+#define USB_DMACTL7_BRSTM_INC16 0x00000600  // INCR16, INCR8, INCR4 or
+                                            // unspecified length
+#define USB_DMACTL7_ERR         0x00000100  // Bus Error Bit
+#define USB_DMACTL7_EP_M        0x000000F0  // Endpoint number
+#define USB_DMACTL7_IE          0x00000008  // DMA Interrupt Enable
+#define USB_DMACTL7_MODE        0x00000004  // DMA Transfer Mode
+#define USB_DMACTL7_DIR         0x00000002  // DMA Direction
+#define USB_DMACTL7_ENABLE      0x00000001  // DMA Transfer Enable
+#define USB_DMACTL7_EP_S        4
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMAADDR7 register.
+//
+//*****************************************************************************
+#define USB_DMAADDR7_ADDR_M     0xFFFFFFFC  // DMA Address
+#define USB_DMAADDR7_ADDR_S     2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DMACOUNT7
+// register.
+//
+//*****************************************************************************
+#define USB_DMACOUNT7_COUNT_M   0xFFFFFFFC  // DMA Count
+#define USB_DMACOUNT7_COUNT_S   2
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RQPKTCOUNT1
+// register.
+//
+//*****************************************************************************
+#define USB_RQPKTCOUNT1_M       0x0000FFFF  // Block Transfer Packet Count
+#define USB_RQPKTCOUNT1_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RQPKTCOUNT2
+// register.
+//
+//*****************************************************************************
+#define USB_RQPKTCOUNT2_M       0x0000FFFF  // Block Transfer Packet Count
+#define USB_RQPKTCOUNT2_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RQPKTCOUNT3
+// register.
+//
+//*****************************************************************************
+#define USB_RQPKTCOUNT3_M       0x0000FFFF  // Block Transfer Packet Count
+#define USB_RQPKTCOUNT3_S       0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RQPKTCOUNT4
+// register.
+//
+//*****************************************************************************
+#define USB_RQPKTCOUNT4_COUNT_M 0x0000FFFF  // Block Transfer Packet Count
+#define USB_RQPKTCOUNT4_COUNT_S 0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RQPKTCOUNT5
+// register.
+//
+//*****************************************************************************
+#define USB_RQPKTCOUNT5_COUNT_M 0x0000FFFF  // Block Transfer Packet Count
+#define USB_RQPKTCOUNT5_COUNT_S 0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RQPKTCOUNT6
+// register.
+//
+//*****************************************************************************
+#define USB_RQPKTCOUNT6_COUNT_M 0x0000FFFF  // Block Transfer Packet Count
+#define USB_RQPKTCOUNT6_COUNT_S 0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RQPKTCOUNT7
+// register.
+//
+//*****************************************************************************
+#define USB_RQPKTCOUNT7_COUNT_M 0x0000FFFF  // Block Transfer Packet Count
+#define USB_RQPKTCOUNT7_COUNT_S 0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_RXDPKTBUFDIS
+// register.
+//
+//*****************************************************************************
+#define USB_RXDPKTBUFDIS_EP7    0x00000080  // EP7 RX Double-Packet Buffer
+                                            // Disable
+#define USB_RXDPKTBUFDIS_EP6    0x00000040  // EP6 RX Double-Packet Buffer
+                                            // Disable
+#define USB_RXDPKTBUFDIS_EP5    0x00000020  // EP5 RX Double-Packet Buffer
+                                            // Disable
+#define USB_RXDPKTBUFDIS_EP4    0x00000010  // EP4 RX Double-Packet Buffer
+                                            // Disable
+#define USB_RXDPKTBUFDIS_EP3    0x00000008  // EP3 RX Double-Packet Buffer
+                                            // Disable
+#define USB_RXDPKTBUFDIS_EP2    0x00000004  // EP2 RX Double-Packet Buffer
+                                            // Disable
+#define USB_RXDPKTBUFDIS_EP1    0x00000002  // EP1 RX Double-Packet Buffer
+                                            // Disable
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_TXDPKTBUFDIS
+// register.
+//
+//*****************************************************************************
+#define USB_TXDPKTBUFDIS_EP7    0x00000080  // EP7 TX Double-Packet Buffer
+                                            // Disable
+#define USB_TXDPKTBUFDIS_EP6    0x00000040  // EP6 TX Double-Packet Buffer
+                                            // Disable
+#define USB_TXDPKTBUFDIS_EP5    0x00000020  // EP5 TX Double-Packet Buffer
+                                            // Disable
+#define USB_TXDPKTBUFDIS_EP4    0x00000010  // EP4 TX Double-Packet Buffer
+                                            // Disable
+#define USB_TXDPKTBUFDIS_EP3    0x00000008  // EP3 TX Double-Packet Buffer
+                                            // Disable
+#define USB_TXDPKTBUFDIS_EP2    0x00000004  // EP2 TX Double-Packet Buffer
+                                            // Disable
+#define USB_TXDPKTBUFDIS_EP1    0x00000002  // EP1 TX Double-Packet Buffer
+                                            // Disable
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_CTO register.
+//
+//*****************************************************************************
+#define USB_CTO_CCTV_M          0x0000FFFF  // Configurable Chirp Timeout Value
+#define USB_CTO_CCTV_S          0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_HHSRTN register.
+//
+//*****************************************************************************
+#define USB_HHSRTN_HHSRTN_M     0x0000FFFF  // HIgh Speed to UTM Operating
+                                            // Delay
+#define USB_HHSRTN_HHSRTN_S     0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_HSBT register.
+//
+//*****************************************************************************
+#define USB_HSBT_HSBT_M         0x0000000F  // High Speed Timeout Adder
+#define USB_HSBT_HSBT_S         0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_LPMATTR register.
+//
+//*****************************************************************************
+#define USB_LPMATTR_ENDPT_M     0x0000F000  // Endpoint
+#define USB_LPMATTR_RMTWAK      0x00000100  // Remote Wake
+#define USB_LPMATTR_HIRD_M      0x000000F0  // Host Initiated Resume Duration
+#define USB_LPMATTR_LS_M        0x0000000F  // Link State
+#define USB_LPMATTR_LS_L1       0x00000001  // Sleep State (L1)
+#define USB_LPMATTR_ENDPT_S     12
+#define USB_LPMATTR_HIRD_S      4
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_LPMCNTRL register.
+//
+//*****************************************************************************
+#define USB_LPMCNTRL_NAK        0x00000010  // LPM NAK
+#define USB_LPMCNTRL_EN_M       0x0000000C  // LPM Enable
+#define USB_LPMCNTRL_EN_NONE    0x00000000  // LPM and Extended transactions
+                                            // are not supported. In this case,
+                                            // the USB does not respond to LPM
+                                            // transactions and LPM
+                                            // transactions cause a timeout
+#define USB_LPMCNTRL_EN_EXT     0x00000004  // LPM is not supported but
+                                            // extended transactions are
+                                            // supported. In this case, the USB
+                                            // does respond to an LPM
+                                            // transaction with a STALL
+#define USB_LPMCNTRL_EN_LPMEXT  0x0000000C  // The USB supports LPM extended
+                                            // transactions. In this case, the
+                                            // USB responds with a NYET or an
+                                            // ACK as determined by the value
+                                            // of TXLPM and other conditions
+#define USB_LPMCNTRL_RES        0x00000002  // LPM Resume
+#define USB_LPMCNTRL_TXLPM      0x00000001  // Transmit LPM Transaction Enable
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_LPMIM register.
+//
+//*****************************************************************************
+#define USB_LPMIM_ERR           0x00000020  // LPM Error Interrupt Mask
+#define USB_LPMIM_RES           0x00000010  // LPM Resume Interrupt Mask
+#define USB_LPMIM_NC            0x00000008  // LPM NC Interrupt Mask
+#define USB_LPMIM_ACK           0x00000004  // LPM ACK Interrupt Mask
+#define USB_LPMIM_NY            0x00000002  // LPM NY Interrupt Mask
+#define USB_LPMIM_STALL         0x00000001  // LPM STALL Interrupt Mask
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_LPMRIS register.
+//
+//*****************************************************************************
+#define USB_LPMRIS_ERR          0x00000020  // LPM Interrupt Status
+#define USB_LPMRIS_RES          0x00000010  // LPM Resume Interrupt Status
+#define USB_LPMRIS_NC           0x00000008  // LPM NC Interrupt Status
+#define USB_LPMRIS_ACK          0x00000004  // LPM ACK Interrupt Status
+#define USB_LPMRIS_NY           0x00000002  // LPM NY Interrupt Status
+#define USB_LPMRIS_LPMST        0x00000001  // LPM STALL Interrupt Status
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_LPMFADDR register.
+//
+//*****************************************************************************
+#define USB_LPMFADDR_ADDR_M     0x0000007F  // LPM Function Address
+#define USB_LPMFADDR_ADDR_S     0
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_EPC register.
+//
+//*****************************************************************************
+#define USB_EPC_PFLTACT_M       0x00000300  // Power Fault Action
+#define USB_EPC_PFLTACT_UNCHG   0x00000000  // Unchanged
+#define USB_EPC_PFLTACT_TRIS    0x00000100  // Tristate
+#define USB_EPC_PFLTACT_LOW     0x00000200  // Low
+#define USB_EPC_PFLTACT_HIGH    0x00000300  // High
+#define USB_EPC_PFLTAEN         0x00000040  // Power Fault Action Enable
+#define USB_EPC_PFLTSEN_HIGH    0x00000020  // Power Fault Sense
+#define USB_EPC_PFLTEN          0x00000010  // Power Fault Input Enable
+#define USB_EPC_EPENDE          0x00000004  // EPEN Drive Enable
+#define USB_EPC_EPEN_M          0x00000003  // External Power Supply Enable
+                                            // Configuration
+#define USB_EPC_EPEN_LOW        0x00000000  // Power Enable Active Low
+#define USB_EPC_EPEN_HIGH       0x00000001  // Power Enable Active High
+#define USB_EPC_EPEN_VBLOW      0x00000002  // Power Enable High if VBUS Low
+                                            // (OTG only)
+#define USB_EPC_EPEN_VBHIGH     0x00000003  // Power Enable High if VBUS High
+                                            // (OTG only)
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_EPCRIS register.
+//
+//*****************************************************************************
+#define USB_EPCRIS_PF           0x00000001  // USB Power Fault Interrupt Status
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_EPCIM register.
+//
+//*****************************************************************************
+#define USB_EPCIM_PF            0x00000001  // USB Power Fault Interrupt Mask
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_EPCISC register.
+//
+//*****************************************************************************
+#define USB_EPCISC_PF           0x00000001  // USB Power Fault Interrupt Status
+                                            // and Clear
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DRRIS register.
+//
+//*****************************************************************************
+#define USB_DRRIS_RESUME        0x00000001  // RESUME Interrupt Status
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DRIM register.
+//
+//*****************************************************************************
+#define USB_DRIM_RESUME         0x00000001  // RESUME Interrupt Mask
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_DRISC register.
+//
+//*****************************************************************************
+#define USB_DRISC_RESUME        0x00000001  // RESUME Interrupt Status and
+                                            // Clear
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_GPCS register.
+//
+//*****************************************************************************
+#define USB_GPCS_DEVMOD_M       0x00000007  // Device Mode
+#define USB_GPCS_DEVMOD_OTG     0x00000000  // Use USB0VBUS and USB0ID pin
+#define USB_GPCS_DEVMOD_HOST    0x00000002  // Force USB0VBUS and USB0ID low
+#define USB_GPCS_DEVMOD_DEV     0x00000003  // Force USB0VBUS and USB0ID high
+#define USB_GPCS_DEVMOD_HOSTVBUS                                              \
+                                0x00000004  // Use USB0VBUS and force USB0ID
+                                            // low
+#define USB_GPCS_DEVMOD_DEVVBUS 0x00000005  // Use USB0VBUS and force USB0ID
+                                            // high
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_VDC register.
+//
+//*****************************************************************************
+#define USB_VDC_VBDEN           0x00000001  // VBUS Droop Enable
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_VDCRIS register.
+//
+//*****************************************************************************
+#define USB_VDCRIS_VD           0x00000001  // VBUS Droop Raw Interrupt Status
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_VDCIM register.
+//
+//*****************************************************************************
+#define USB_VDCIM_VD            0x00000001  // VBUS Droop Interrupt Mask
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_VDCISC register.
+//
+//*****************************************************************************
+#define USB_VDCISC_VD           0x00000001  // VBUS Droop Interrupt Status and
+                                            // Clear
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_PP register.
+//
+//*****************************************************************************
+#define USB_PP_ECNT_M           0x0000FF00  // Endpoint Count
+#define USB_PP_USB_M            0x000000C0  // USB Capability
+#define USB_PP_USB_DEVICE       0x00000040  // DEVICE
+#define USB_PP_USB_HOSTDEVICE   0x00000080  // HOST
+#define USB_PP_USB_OTG          0x000000C0  // OTG
+#define USB_PP_ULPI             0x00000020  // ULPI Present
+#define USB_PP_PHY              0x00000010  // PHY Present
+#define USB_PP_TYPE_M           0x0000000F  // Controller Type
+#define USB_PP_TYPE_0           0x00000000  // The first-generation USB
+                                            // controller
+#define USB_PP_TYPE_1           0x00000001  // The second-generation USB
+                                            // controller revision
+#define USB_PP_ECNT_S           8
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_PC register.
+//
+//*****************************************************************************
+#define USB_PC_ULPIEN           0x00010000  // ULPI Enable
+
+//*****************************************************************************
+//
+// The following are defines for the bit fields in the USB_O_CC register.
+//
+//*****************************************************************************
+#define USB_CC_CLKEN            0x00000200  // USB Clock Enable
+#define USB_CC_CSD              0x00000100  // Clock Source/Direction
+#define USB_CC_CLKDIV_M         0x0000000F  // PLL Clock Divisor
+#define USB_CC_CLKDIV_S         0
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif