clean up

examples/host/cdc_msc_hid/src/main.c

@@ -75,7 +75,7 @@ CFG_TUSB_MEM_SECTION static char serial_in_buffer[64] = { 0 };
 void tuh_mount_cb(uint8_t dev_addr)
 {
   // application set-up
-  printf("\na device with address %d is mounted\n", dev_addr);
+  printf("A device with address %d is mounted\r\n", dev_addr);
 
   tuh_cdc_receive(dev_addr, serial_in_buffer, sizeof(serial_in_buffer), true); // schedule first transfer
 }
@@ -83,7 +83,7 @@ void tuh_mount_cb(uint8_t dev_addr)
 void tuh_umount_cb(uint8_t dev_addr)
 {
   // application tear-down
-  printf("\na device with address %d is unmounted \n", dev_addr);
+  printf("A device with address %d is unmounted \r\n", dev_addr);
 }
 
 // invoked ISR context
@@ -187,14 +187,14 @@ void print_greeting(void)
       [OPT_OS_FREERTOS]  = "FreeRTOS",
   };
 
-  printf("\n--------------------------------------------------------------------\n");
-  printf("- Host example\n");
-  printf("- if you find any bugs or get any questions, feel free to file an\n");
-  printf("- issue at https://github.com/hathach/tinyusb\n");
-  printf("--------------------------------------------------------------------\n\n");
+  printf("--------------------------------------------------------------------\r\n");
+  printf("- Host example\r\n");
+  printf("- if you find any bugs or get any questions, feel free to file an\r\n");
+  printf("- issue at https://github.com/hathach/tinyusb\r\n");
+  printf("--------------------------------------------------------------------\r\n\r\n");
 
   printf("This Host demo is configured to support:\r\n");
-  printf("  - RTOS = %s\n", rtos_name[CFG_TUSB_OS]);
+  printf("  - RTOS = %s\r\n", rtos_name[CFG_TUSB_OS]);
 
 #if CFG_TUH_CDC
   printf("  - Communication Device Class\r\n");

hw/bsp/mcb1800/board.mk

@@ -5,7 +5,7 @@ CFLAGS += \
   -mcpu=cortex-m3 \
   -nostdlib \
   -DCORE_M3 \
-  -D__USE_LPCOPEN
+  -D__USE_LPCOPEN \
   -DCFG_TUSB_MCU=OPT_MCU_LPC18XX \
 
 # mcu driver cause following warnings
@@ -37,7 +37,7 @@ FREERTOS_PORT = ARM_CM3
 
 # For flash-jlink target
 JLINK_DEVICE = LPC1857
-JLINK_IF = jtag
+JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink

test/test/support/tusb_config.h

@@ -43,7 +43,7 @@
   #define CFG_TUSB_MCU  OPT_MCU_NRF5X
 #endif
 
-#define CFG_TUSB_RHPORT0_MODE    (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+#define CFG_TUSB_RHPORT0_MODE    (OPT_MODE_DEVICE | OPT_MODE_HOST | OPT_MODE_HIGH_SPEED)
 #define CFG_TUSB_OS              OPT_OS_NONE
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build