clean up example

examples/obsolete/device/src/cdc_device_app.c

@@ -56,63 +56,22 @@ static osal_semaphore_t sem_hdl;
 //--------------------------------------------------------------------+
 // INTERNAL OBJECT & FUNCTION DECLARATION
 //--------------------------------------------------------------------+
-TUSB_CFG_ATTR_USBRAM static uint8_t serial_rx_buffer[SERIAL_BUFFER_SIZE];
-TUSB_CFG_ATTR_USBRAM static uint8_t serial_tx_buffer[SERIAL_BUFFER_SIZE];
-
-FIFO_DEF(fifo_serial, SERIAL_BUFFER_SIZE, uint8_t, true);
 
 //--------------------------------------------------------------------+
 // tinyusb callbacks
 //--------------------------------------------------------------------+
-void cdc_serial_app_mount(uint8_t coreid)
+void cdc_serial_app_mount(uint8_t port)
 {
-  osal_semaphore_reset(sem_hdl);
-
-  tud_cdc_receive(coreid, serial_rx_buffer, SERIAL_BUFFER_SIZE, true);
 }
 
-void cdc_serial_app_umount(uint8_t coreid)
+void cdc_serial_app_umount(uint8_t port)
 {
 
 }
 
-void tud_cdc_rx_cb(uint8_t coreid, uint32_t xferred_bytes)
+void tud_cdc_rx_cb(uint8_t port)
 {
-  fifo_write_n(&fifo_serial, serial_rx_buffer, xferred_bytes);
-  osal_semaphore_post(sem_hdl);  // notify main task
-}
 
-
-void tud_cdc_xfer_cb(uint8_t coreid, tusb_event_t event, cdc_pipeid_t pipe_id, uint32_t xferred_bytes)
-{
-  switch ( pipe_id )
-  {
-    case CDC_PIPE_DATA_OUT:
-      switch(event)
-      {
-        case TUSB_EVENT_XFER_COMPLETE:
-          for(uint8_t i=0; i<xferred_bytes; i++)
-          {
-            fifo_write(&fifo_serial, serial_rx_buffer+i);
-          }
-          osal_semaphore_post(sem_hdl);  // notify main task
-        break;
-
-        case TUSB_EVENT_XFER_ERROR:
-          tud_cdc_receive(0, serial_rx_buffer, SERIAL_BUFFER_SIZE, true); // ignore, queue transfer again
-        break;
-
-        case TUSB_EVENT_XFER_STALLED:
-        default :
-        break;
-      }
-    break;
-
-    case CDC_PIPE_DATA_IN:
-    case CDC_PIPE_NOTIFICATION:
-    default:
-    break;
-  }
 }
 
 //--------------------------------------------------------------------+
@@ -120,10 +79,6 @@ void tud_cdc_xfer_cb(uint8_t coreid, tusb_event_t event, cdc_pipeid_t pipe_id, u
 //--------------------------------------------------------------------+
 void cdc_serial_app_init(void)
 {
-  sem_hdl = osal_semaphore_create(1, 0);
-  VERIFY(sem_hdl, );
-
-  osal_task_create(cdc_serial_app_task, "cdc", 128, NULL, CDC_SERIAL_APP_TASK_PRIO);
 }
 
 tusb_error_t cdc_serial_subtask(void);
@@ -141,30 +96,14 @@ tusb_error_t cdc_serial_subtask(void)
 {
   OSAL_SUBTASK_BEGIN
 
-  tusb_error_t error;
+  if ( tud_mounted(0) && tud_cdc_available(0) )
+  {
+    uint8_t buf[64];
 
-  osal_semaphore_wait(sem_hdl, OSAL_TIMEOUT_WAIT_FOREVER, &error);
-  (void) error; // suppress compiler's warnings
+    // read and echo back
+    uint32_t count = tud_cdc_read(0, buf, sizeof(buf));
 
-  if ( tud_mounted(0) )
-  {
-    // echo back data in the fifo
-    if ( !tud_cdc_busy(0, CDC_PIPE_DATA_IN) )
-    {
-      uint16_t count=0;
-      while( fifo_read(&fifo_serial, &serial_tx_buffer[count]) )
-      {
-        count++;
-      }
-
-      if (count)
-      {
-        tud_cdc_send(0, serial_tx_buffer, count, false);
-      }
-    }
-
-    // getting more data from host
-    tud_cdc_receive(0, serial_rx_buffer, SERIAL_BUFFER_SIZE, true);
+    tud_cdc_write(0, buf, count);
   }
 
   OSAL_SUBTASK_END

examples/obsolete/device/src/cdc_device_app.h

@@ -58,8 +58,8 @@
 void cdc_serial_app_init(void);
 void cdc_serial_app_task(void* param);
 
-void cdc_serial_app_mount(uint8_t coreid);
-void cdc_serial_app_umount(uint8_t coreid);
+void cdc_serial_app_mount(uint8_t port);
+void cdc_serial_app_umount(uint8_t port);
 
 #else
 

examples/obsolete/device/src/keyboard_device_app.c

@@ -56,17 +56,17 @@ TUSB_CFG_ATTR_USBRAM hid_keyboard_report_t keyboard_report;
 //--------------------------------------------------------------------+
 // tinyusb callbacks
 //--------------------------------------------------------------------+
-void keyboard_app_mount(uint8_t coreid)
+void keyboard_app_mount(uint8_t port)
 {
 
 }
 
-void keyboard_app_umount(uint8_t coreid)
+void keyboard_app_umount(uint8_t port)
 {
 
 }
 
-void tud_hid_keyboard_cb(uint8_t coreid, tusb_event_t event, uint32_t xferred_bytes)
+void tud_hid_keyboard_cb(uint8_t port, tusb_event_t event, uint32_t xferred_bytes)
 {
   switch(event)
   {
@@ -77,7 +77,7 @@ void tud_hid_keyboard_cb(uint8_t coreid, tusb_event_t event, uint32_t xferred_by
   }
 }
 
-uint16_t tud_hid_keyboard_get_report_cb(uint8_t coreid, hid_request_report_type_t report_type, void** pp_report, uint16_t requested_length)
+uint16_t tud_hid_keyboard_get_report_cb(uint8_t port, hid_request_report_type_t report_type, void** pp_report, uint16_t requested_length)
 {
   // get other than input report is not supported by this keyboard demo
   if ( report_type != HID_REQUEST_REPORT_INPUT ) return 0;
@@ -86,7 +86,7 @@ uint16_t tud_hid_keyboard_get_report_cb(uint8_t coreid, hid_request_report_type_
   return requested_length;
 }
 
-void tud_hid_keyboard_set_report_cb(uint8_t coreid, hid_request_report_type_t report_type, uint8_t p_report_data[], uint16_t length)
+void tud_hid_keyboard_set_report_cb(uint8_t port, hid_request_report_type_t report_type, uint8_t p_report_data[], uint16_t length)
 {
   // set other than output report is not supported by this keyboard demo
   if ( report_type != HID_REQUEST_REPORT_OUTPUT ) return;
@@ -98,6 +98,8 @@ void tud_hid_keyboard_set_report_cb(uint8_t coreid, hid_request_report_type_t re
   if (kbd_led & KEYBOARD_LED_CAPSLOCK  ) interval_divider *= 2;
   if (kbd_led & KEYBOARD_LED_SCROLLLOCK) interval_divider *= 2;
 
+  // TODO remove
+  extern void led_blinking_set_interval(uint32_t ms);
   led_blinking_set_interval( 1000 / interval_divider);
 }
 

examples/obsolete/device/src/keyboard_device_app.h

@@ -58,8 +58,8 @@
 void keyboard_app_init(void);
 void keyboard_app_task(void* param);
 
-void keyboard_app_mount(uint8_t coreid);
-void keyboard_app_umount(uint8_t coreid);
+void keyboard_app_mount(uint8_t port);
+void keyboard_app_umount(uint8_t port);
 
 #else
 

examples/obsolete/device/src/main.c

@@ -44,6 +44,7 @@
 #include <string.h>
 
 #include "bsp/board.h"
+#include "app_os_prio.h"
 #include "tusb.h"
 
 #include "msc_device_app.h"
@@ -59,6 +60,9 @@
 // INTERNAL OBJECT & FUNCTION DECLARATION
 //--------------------------------------------------------------------+
 void print_greeting(void);
+void led_blinking_init(void);
+void led_blinking_task(void* param);
+
 
 #if TUSB_CFG_OS == TUSB_OS_NONE
 // like a real RTOS, this function is a main loop invoking each task in application and never return
@@ -107,18 +111,66 @@ int main(void)
 //--------------------------------------------------------------------+
 // tinyusb callbacks
 //--------------------------------------------------------------------+
-void tud_mount_cb(uint8_t coreid)
+void tud_mount_cb(uint8_t port)
+{
+  cdc_serial_app_mount(port);
+  keyboard_app_mount(port);
+  msc_app_mount(port);
+}
+
+void tud_umount_cb(uint8_t port)
+{
+  cdc_serial_app_umount(port);
+  keyboard_app_umount(port);
+  msc_app_umount(port);
+}
+
+//--------------------------------------------------------------------+
+// BLINKING TASK
+//--------------------------------------------------------------------+
+static uint32_t led_blink_interval_ms = 1000; // default is 1 second
+
+void led_blinking_init(void)
+{
+  led_blink_interval_ms = 1000;
+  osal_task_create(led_blinking_task, "blinky", 128, NULL, LED_BLINKING_APP_TASK_PRIO);
+}
+
+void led_blinking_set_interval(uint32_t ms)
+{
+  led_blink_interval_ms = ms;
+}
+
+tusb_error_t led_blinking_subtask(void);
+void led_blinking_task(void* param)
 {
-  cdc_serial_app_mount(coreid);
-  keyboard_app_mount(coreid);
-  msc_app_mount(coreid);
+  (void) param;
+
+  OSAL_TASK_BEGIN
+  led_blinking_subtask();
+  OSAL_TASK_END
 }
 
-void tud_umount_cb(uint8_t coreid)
+tusb_error_t led_blinking_subtask(void)
 {
-  cdc_serial_app_umount(coreid);
-  keyboard_app_umount(coreid);
-  msc_app_umount(coreid);
+  OSAL_SUBTASK_BEGIN
+
+  static uint32_t led_on_mask = 0;
+
+  osal_task_delay(led_blink_interval_ms);
+
+  board_leds(led_on_mask, 1 - led_on_mask);
+  led_on_mask = 1 - led_on_mask; // toggle
+
+//  uint32_t btn_mask;
+//  btn_mask = board_buttons();
+//
+//  for(uint8_t i=0; i<32; i++)
+//  {
+//    if ( BIT_TEST_(btn_mask, i) ) printf("button %d is pressed\n", i);
+//  }
+
+  OSAL_SUBTASK_END
 }
 
 //--------------------------------------------------------------------+

examples/obsolete/device/src/mouse_device_app.c

@@ -56,17 +56,17 @@ TUSB_CFG_ATTR_USBRAM hid_mouse_report_t mouse_report;
 //--------------------------------------------------------------------+
 // tinyusb callbacks
 //--------------------------------------------------------------------+
-void mouse_app_mount(uint8_t coreid)
+void mouse_app_mount(uint8_t port)
 {
 
 }
 
-void mouse_app_umount(uint8_t coreid)
+void mouse_app_umount(uint8_t port)
 {
 
 }
 
-void tusbd_hid_mouse_cb(uint8_t coreid, tusb_event_t event, uint32_t xferred_bytes)
+void tusbd_hid_mouse_cb(uint8_t port, tusb_event_t event, uint32_t xferred_bytes)
 {
   switch(event)
   {
@@ -77,7 +77,7 @@ void tusbd_hid_mouse_cb(uint8_t coreid, tusb_event_t event, uint32_t xferred_byt
   }
 }
 
-uint16_t tusbd_hid_mouse_get_report_cb(uint8_t coreid, hid_request_report_type_t report_type, void** pp_report, uint16_t requested_length)
+uint16_t tusbd_hid_mouse_get_report_cb(uint8_t port, hid_request_report_type_t report_type, void** pp_report, uint16_t requested_length)
 {
   if ( report_type != HID_REQUEST_REPORT_INPUT ) return 0; // not support other report type for this mouse demo
 
@@ -85,7 +85,7 @@ uint16_t tusbd_hid_mouse_get_report_cb(uint8_t coreid, hid_request_report_type_t
   return requested_length;
 }
 
-void tusbd_hid_mouse_set_report_cb(uint8_t coreid, hid_request_report_type_t report_type, uint8_t report_data[], uint16_t length)
+void tusbd_hid_mouse_set_report_cb(uint8_t port, hid_request_report_type_t report_type, uint8_t report_data[], uint16_t length)
 {
   // mouse demo does not support set report --> do nothing
 }

examples/obsolete/device/src/mouse_device_app.h

@@ -57,8 +57,8 @@
 
 void mouse_app_init(void);
 void mouse_app_task(void * param);
-void mouse_app_mount(uint8_t coreid);
-void mouse_app_umount(uint8_t coreid);
+void mouse_app_mount(uint8_t port);
+void mouse_app_umount(uint8_t port);
 
 #else
 

examples/obsolete/device/src/msc_device_app.c

@@ -89,17 +89,17 @@ static scsi_mode_parameters_t const msc_dev_mode_para =
 //--------------------------------------------------------------------+
 // tinyusb callbacks
 //--------------------------------------------------------------------+
-void msc_app_mount(uint8_t coreid)
+void msc_app_mount(uint8_t port)
 {
 
 }
 
-void msc_app_umount(uint8_t coreid)
+void msc_app_umount(uint8_t port)
 {
 
 }
 
-msc_csw_status_t tud_msc_scsi_cb (uint8_t coreid, uint8_t lun, uint8_t scsi_cmd[16], void const ** pp_buffer, uint16_t* p_length)
+msc_csw_status_t tud_msc_scsi_cb (uint8_t port, uint8_t lun, uint8_t scsi_cmd[16], void const ** pp_buffer, uint16_t* p_length)
 {
   // read10 & write10 has their own callback and MUST not be handled here
   switch (scsi_cmd[0])

examples/obsolete/device/src/msc_device_app.h

@@ -72,8 +72,8 @@ issue at github.com/hathach/tinyusb"
 void msc_app_init(void);
 void msc_app_task(void* param);
 
-void msc_app_mount(uint8_t coreid);
-void msc_app_umount(uint8_t coreid);
+void msc_app_mount(uint8_t port);
+void msc_app_umount(uint8_t port);
 
 extern scsi_sense_fixed_data_t mscd_sense_data;
 

examples/obsolete/device/src/msc_device_ramdisk.c

@@ -91,13 +91,13 @@ uint8_t msc_device_ramdisk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
 //--------------------------------------------------------------------+
 // IMPLEMENTATION
 //--------------------------------------------------------------------+
-uint16_t tud_msc_read10_cb (uint8_t coreid, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count)
+uint16_t tud_msc_read10_cb (uint8_t port, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count)
 {
   (*pp_buffer) = msc_device_ramdisk[lba];
 
   return min16_of(block_count, DISK_BLOCK_NUM);
 }
-uint16_t tud_msc_write10_cb(uint8_t coreid, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count)
+uint16_t tud_msc_write10_cb(uint8_t port, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count)
 {
   (*pp_buffer) = msc_device_ramdisk[lba];
 

examples/obsolete/device/src/msc_device_romdisk.c

@@ -97,7 +97,7 @@ static uint8_t sector_buffer[DISK_BLOCK_SIZE];
 //--------------------------------------------------------------------+
 // IMPLEMENTATION
 //--------------------------------------------------------------------+
-uint16_t tusbd_msc_read10_cb (uint8_t coreid, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count)
+uint16_t tusbd_msc_read10_cb (uint8_t port, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count)
 {
   memcpy(sector_buffer, msc_device_app_rommdisk[lba], DISK_BLOCK_SIZE);
   (*pp_buffer) = sector_buffer;
@@ -106,7 +106,7 @@ uint16_t tusbd_msc_read10_cb (uint8_t coreid, uint8_t lun, void** pp_buffer, uin
 }
 
 // Stall write10 by return 0, as this is readonly disk
-uint16_t tusbd_msc_write10_cb(uint8_t coreid, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count)
+uint16_t tusbd_msc_write10_cb(uint8_t port, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count)
 {
   (*pp_buffer) = NULL;
 

hw/bsp/board.c

@@ -55,56 +55,6 @@ uint32_t tusb_hal_tick_get(void)
 
 #endif
 
-#if 0
-//--------------------------------------------------------------------+
-// BLINKING TASK
-//--------------------------------------------------------------------+
-static uint32_t led_blink_interval_ms = 1000; // default is 1 second
-
-void led_blinking_init(void)
-{
-  led_blink_interval_ms = 1000;
-  osal_task_create(led_blinking_task, "blinky", 128, NULL, LED_BLINKING_APP_TASK_PRIO);
-}
-
-void led_blinking_set_interval(uint32_t ms)
-{
-  led_blink_interval_ms = ms;
-}
-
-tusb_error_t led_blinking_subtask(void);
-void led_blinking_task(void* param)
-{
-  (void) param;
-
-  OSAL_TASK_BEGIN
-  led_blinking_subtask();
-  OSAL_TASK_END
-}
-
-tusb_error_t led_blinking_subtask(void)
-{
-  OSAL_SUBTASK_BEGIN
-
-  static uint32_t led_on_mask = 0;
-
-  osal_task_delay(led_blink_interval_ms);
-
-  board_leds(led_on_mask, 1 - led_on_mask);
-  led_on_mask = 1 - led_on_mask; // toggle
-
-//  uint32_t btn_mask;
-//  btn_mask = board_buttons();
-//
-//  for(uint8_t i=0; i<32; i++)
-//  {
-//    if ( BIT_TEST_(btn_mask, i) ) printf("button %d is pressed\n", i);
-//  }
-
-  OSAL_SUBTASK_END
-}
-#endif
-
 // TODO remove legacy cmsis code
 void check_failed(uint8_t *file, uint32_t line)
 {

tinyusb/common/compiler/compiler_gcc.h

@@ -121,10 +121,10 @@
 
 // TODO mcu specific
 #if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
-#define __n2be(x)   __REV(x) ///< built-in function to convert 32-bit from native to Big Endian
-#define __be2n(x)   __n2be(x) ///< built-in function to convert 32-bit from Big Endian to native
+#define __n2be(x)       __builtin_bswap32(x) ///< built-in function to convert 32-bit from native to Big Endian
+#define __be2n(x)       __n2be(x) ///< built-in function to convert 32-bit from Big Endian to native
 
-#define __n2be_16(u16)  ((uint16_t) __REV16(u16))
+#define __n2be_16(u16)  __builtin_bswap16(u16)
 #define __be2n_16(u16)  __n2be_16(u16)
 #endif