nxp bsp support: frdm-mcxa346 (#10625)

* update nxp mcxa driver to support frdm-mcxa346

* update NXP bsp README

* update frdm-mcxa346 project

bsp/nxp/README.md

@@ -1,8 +1,41 @@
-# NXP BSP 说明
+# NXP BSP 支持说明
 
-存放RT-Thread NXP BSP目录，目前支持MCX系列，之前一些老的IC支持(如LPC/Kinetis/I.MXRT)会逐步放到此目录下
+NXP 系列 BSP 目前支持情况如下表所示：
 
-| BSP 文件夹名称       | 开发板名称                |
-|:------------------------- |:-------------------------- |
-| mcxn | frdm-mcxn947 |
-| mcxa | frdm-mcxa153 |
+| **BSP 文件夹名称**                                    | **开发板名称**                           |
+|:------------------------------------------------ |:----------------------------------- |
+| **MCXN 系列**                                     |                                     |
+| [frdm-mcxn947](mcx/mcxn/frdm-mcxn947) | NXP 官方 FRDM-MCXN947 开发板 |
+| [frdm-mcxn236](mcx/mcxn/frdm-mcxn236) | NXP 官方 FRDM-MCXN236 开发板 |
+| **MCXA 系列** |  |
+| [frdm-mcxa153](mcx/mcxa/frdm-mcxa153) | NXP 官方 FRDM-MCXA153 开发板 |
+| [frdm-mcxa156](mcx/mcxa/frdm-mcxa156) | NXP 官方 FRDM-MCXA156 开发板 |
+| [frdm-mcxa346](mcx/mcxa/frdm-mcxa346) | NXP 官方 FRDM-MCXA346 开发板 |
+| [frdm-mcxa344](mcx/mcxa/frdm-mcxa344) | NXP 官方 FRDM-MCXA344 开发板 |
+| **MCXC 系列** |  |
+| [frdm-mcxc444](mcx/mcxc/frdm-mcxc444) | NXP 官方 FRDM-MCXC444 开发板 |
+| **LPC 系列**                                      |                                     |
+| [lpc43xx](lpc/lpc43xx)                           | NXP LPC43xx 系列开发板                   |
+| [lpc55sxx](lpc/lpc55sxx)                         | NXP LPC55Sxx 系列开发板                  |
+| [lpc176x](lpc/lpc176x)                           | NXP LPC176x 系列开发板                   |
+| [lpc178x](lpc/lpc178x)                           | NXP LPC178x 系列开发板                   |
+| [lpc408x](lpc/lpc408x)                           | NXP LPC408x 系列开发板                   |
+| [lpc824](lpc/lpc824)                             | NXP LPC824 开发板                       |
+| [lpc1114](lpc/lpc1114)                           | NXP LPC1114 开发板                      |
+| [lpc2148](lpc/lpc2148)                           | NXP LPC2148 开发板                      |
+| [lpc2478](lpc/lpc2478)                           | NXP LPC2478 开发板                      |
+| [lpc5410x](lpc/lpc5410x)                         | NXP LPC5410x 系列开发板                  |
+| [lpc54114-lite](lpc/lpc54114-lite)               | NXP LPC54114-Lite 开发板                |
+| [lpc54608-lpcxpresso](lpc/lpc54608-lpcxpresso)   | NXP 官方 LPC54608-LPCXpresso 开发板     |
+
+另外,我们还提供了一些热门开发板的上手说明: 
+
+* [NXP FRDM-MCXN947上手指南](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/tutorial/quick-start/frdm_mcxn947/quick-start)
+* [NXP FRDM-MCXA156上手指南](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/tutorial/quick-start/frdm_mcxa156/quick-start)
+
+## 注意事项
+
+- MCX 系列是 NXP 最新推出的 MCU 系列，具有高性能和低功耗特性
+- 部分老旧系列（LPC/Kinetis/i.MX RT）正在逐步迁移和更新中
+- 建议优先选择 MCX 系列进行新项目开发
+- 各系列 BSP 的具体支持功能请参考对应目录下的 README 文档

bsp/nxp/mcx/mcxa/Libraries/drivers/drv_adc.c

@@ -14,6 +14,10 @@
 #include "fsl_lpadc.h"
 #include "fsl_spc.h"
 
+#define DBG_TAG    "drv.adc"
+#define DBG_LVL    DBG_INFO
+#include <rtdbg.h>
+
 #ifdef RT_USING_ADC
 
 #define DEFAULT_HW_AVG          (kLPADC_HardwareAverageCount4)

bsp/nxp/mcx/mcxa/Libraries/drivers/drv_i2c.c

@@ -16,16 +16,27 @@
 
 #ifdef RT_USING_I2C
 
+#define DBG_TAG    "drv.i2c"
+#define DBG_LVL    DBG_INFO
+#include <rtdbg.h>
+
 enum
 {
 #ifdef BSP_USING_I2C0
     I2C0_INDEX,
 #endif
+#ifdef BSP_USING_I2C1
+    I2C1_INDEX,
+#endif
+#ifdef BSP_USING_I2C2
+    I2C2_INDEX,
+#endif
+#ifdef BSP_USING_I2C3
+    I2C3_INDEX,
+#endif
 };
 
 
-#define i2c_dbg                 rt_kprintf
-
 struct lpc_i2c_bus
 {
     struct rt_i2c_bus_device    parent;
@@ -44,12 +55,58 @@ struct lpc_i2c_bus lpc_obj[] =
         {
             .I2C = LPI2C0,
             .baud = 100000U,
+#if (defined(CPU_MCXA346VLH) || defined(CPU_MCXA346VLL) || defined(CPU_MCXA346VLQ) || defined(CPU_MCXA346VPN))
+            .clock_attach_id = kFRO_LF_DIV_to_LPI2C0,
+#else
             .clock_attach_id = kFRO12M_to_LPI2C0,
+#endif
             .clock_div_name = kCLOCK_DivLPI2C0,
             .clock_src = kCLOCK_Fro12M,
             .name = "i2c0",
         },
 #endif
+#ifdef BSP_USING_I2C1
+        {
+            .I2C = LPI2C1,
+            .baud = 100000U,
+#if (defined(CPU_MCXA346VLH) || defined(CPU_MCXA346VLL) || defined(CPU_MCXA346VLQ) || defined(CPU_MCXA346VPN))
+            .clock_attach_id = kFRO_LF_DIV_to_LPI2C1,
+#else
+            .clock_attach_id = kFRO12M_to_LPI2C1,
+#endif
+            .clock_div_name = kCLOCK_DivLPI2C1,
+            .clock_src = kCLOCK_Fro12M,
+            .name = "i2c1",
+        },
+#endif
+#ifdef BSP_USING_I2C2
+        {
+            .I2C = LPI2C2,
+            .baud = 100000U,
+#if (defined(CPU_MCXA346VLH) || defined(CPU_MCXA346VLL) || defined(CPU_MCXA346VLQ) || defined(CPU_MCXA346VPN))
+            .clock_attach_id = kFRO_LF_DIV_to_LPI2C2,
+#else
+            .clock_attach_id = kFRO12M_to_LPI2C2,
+#endif
+            .clock_div_name = kCLOCK_DivLPI2C2,
+            .clock_src = kCLOCK_Fro12M,
+            .name = "i2c2",
+        },
+#endif
+#ifdef BSP_USING_I2C3
+        {
+            .I2C = LPI2C3,
+            .baud = 100000U,
+#if (defined(CPU_MCXA346VLH) || defined(CPU_MCXA346VLL) || defined(CPU_MCXA346VLQ) || defined(CPU_MCXA346VPN))
+            .clock_attach_id = kFRO_LF_DIV_to_LPI2C3,
+#else
+            .clock_attach_id = kFRO12M_to_LPI2C3,
+#endif
+            .clock_div_name = kCLOCK_DivLPI2C3,
+            .clock_src = kCLOCK_Fro12M,
+            .name = "i2c3",
+        },
+#endif
 };
 
 static rt_ssize_t lpc_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg msgs[], rt_uint32_t num)
@@ -80,7 +137,7 @@ static rt_ssize_t lpc_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg
 
             if (LPI2C_MasterTransferBlocking(lpc_i2c->I2C, &xfer) != kStatus_Success)
             {
-                i2c_dbg("i2c bus read failed!\n");
+                LOG_D("i2c bus read failed!\n");
                 return i;
             }
         }
@@ -99,7 +156,7 @@ static rt_ssize_t lpc_i2c_xfer(struct rt_i2c_bus_device *bus, struct rt_i2c_msg
 
             if (LPI2C_MasterTransferBlocking(lpc_i2c->I2C, &xfer) != kStatus_Success)
             {
-                i2c_dbg("i2c bus write failed!\n");
+                LOG_D("i2c bus write failed!\n");
                 return i;
             }
         }

bsp/nxp/mcx/mcxa/Libraries/drivers/drv_pin.c

@@ -17,22 +17,25 @@
 
 #ifdef RT_USING_PIN
 
+#define DBG_TAG    "drv.pin"
+#define DBG_LVL    DBG_INFO
+#include <rtdbg.h>
 
 #define GET_GPIO_PORT(x)      ((x) / 32)
 #define GET_GPIO_PIN(x)       ((x) % 32)
 
 static struct rt_pin_ops mcx_pin_ops;
 
-static GPIO_Type *GPIO_TYPE_TBL[] = {GPIO0, GPIO1, GPIO2, GPIO3};
-static PORT_Type *PORT_TYPE_TBL[] = {PORT0, PORT1, PORT2, PORT3};
-static IRQn_Type   IRQ_TYPE_TBL[] = {GPIO0_IRQn, GPIO1_IRQn, GPIO2_IRQn, GPIO3_IRQn};
+static GPIO_Type *GPIO_TYPE_TBL[] = GPIO_BASE_PTRS;
+static PORT_Type *PORT_TYPE_TBL[] = PORT_BASE_PTRS;
+static IRQn_Type   IRQ_TYPE_TBL[] = GPIO_IRQS;
 
 
 #define PIN2GPIO(x)     GPIO_TYPE_TBL[GET_GPIO_PORT(x)]
 #define PIN2PORT(x)     PORT_TYPE_TBL[GET_GPIO_PORT(x)]
 #define PIN2IRQ(x)      IRQ_TYPE_TBL[GET_GPIO_PORT(x)]
 
-struct rt_pin_irq_hdr pin_irq_hdr_tab[32*4] = {0};
+struct rt_pin_irq_hdr pin_irq_hdr_tab[32*5] = {0};
 
 static void mcx_pin_mode(rt_device_t dev, rt_base_t pin, rt_uint8_t mode)
 {
@@ -143,6 +146,11 @@ void GPIO3_IRQHandler(void)
     pin_irq_handler(3);
 }
 
+void GPIO4_IRQHandler(void)
+{
+    pin_irq_handler(4);
+}
+
 
 static rt_err_t mcx_pin_attach_irq(struct rt_device *device, rt_base_t pin, rt_uint8_t mode, void (*hdr)(void *args), void *args)
 {

bsp/nxp/mcx/mcxa/Libraries/drivers/drv_rtc.c

@@ -0,0 +1,278 @@
+/*
+ * Copyright (c) 2006-2025, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2025-08-19     Alex Yang    Add MCXA346 RTC driver for RT-Thread
+ */
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <sys/time.h>
+
+#ifdef BSP_USING_RTC
+
+#define DBG_TAG    "drv.rtc"
+#define DBG_LVL    DBG_INFO
+#include <rtdbg.h>
+
+#include "fsl_rtc.h"
+#include "fsl_clock.h"
+
+
+/* Get RTC timestamp */
+static time_t get_rtc_timestamp(void)
+{
+    rtc_datetime_t datetime;
+    struct tm tm_new;
+
+    /* Get current time from RTC */
+    RTC_GetDatetime(RTC0, &datetime);
+
+    tm_new.tm_sec  = datetime.second;
+    tm_new.tm_min  = datetime.minute;
+    tm_new.tm_hour = datetime.hour;
+    tm_new.tm_mday = datetime.day;
+    tm_new.tm_mon  = datetime.month - 1;
+    tm_new.tm_year = datetime.year - 1900;
+    tm_new.tm_isdst = 0;
+
+    LOG_D("get rtc time: %04d-%02d-%02d %02d:%02d:%02d",
+          datetime.year, datetime.month, datetime.day,
+          datetime.hour, datetime.minute, datetime.second);
+
+    return mktime(&tm_new);
+}
+
+/* Set RTC timestamp */
+static rt_err_t set_rtc_time_stamp(time_t time_stamp)
+{
+    rtc_datetime_t datetime;
+    struct tm *time_tm;
+
+    time_tm = gmtime(&time_stamp);
+    if (time_tm->tm_year < 70) /* Year should be >= 1970 */
+    {
+        LOG_E("Invalid year: %d", time_tm->tm_year + 1900);
+        return -RT_ERROR;
+    }
+
+    /* Convert to RTC datetime format */
+    datetime.year   = time_tm->tm_year + 1900;
+    datetime.month  = time_tm->tm_mon + 1;
+    datetime.day    = time_tm->tm_mday;
+    datetime.hour   = time_tm->tm_hour;
+    datetime.minute = time_tm->tm_min;
+    datetime.second = time_tm->tm_sec;
+
+    /* Set RTC time */
+    RTC_StopTimer(RTC0);
+
+    RTC_SetDatetime(RTC0, &datetime);
+
+    RTC_StartTimer(RTC0);
+
+    LOG_D("set rtc time: %04d-%02d-%02d %02d:%02d:%02d",
+          datetime.year, datetime.month, datetime.day,
+          datetime.hour, datetime.minute, datetime.second);
+
+    return RT_EOK;
+}
+
+/* RTC configuration */
+static rt_err_t rt_rtc_config(void)
+{
+    rtc_config_t rtc_config;
+
+    /* Get default RTC configuration */
+    RTC_GetDefaultConfig(&rtc_config);
+
+    /* Initialize RTC - Note: RTC_Init returns void, not status */
+    RTC_Init(RTC0, &rtc_config);
+
+    /* Start RTC timer */
+    RTC_StartTimer(RTC0);
+
+    return RT_EOK;
+}
+
+/* RTC initialization */
+static rt_err_t _rtc_init(void)
+{
+
+    /* Configure RTC */
+    if (rt_rtc_config() != RT_EOK)
+    {
+        LOG_E("RTC config failed.");
+        return -RT_ERROR;
+    }
+
+    LOG_D("RTC initialized successfully");
+    return RT_EOK;
+}
+
+/* Get RTC seconds */
+static rt_err_t _rtc_get_secs(time_t *args)
+{
+    RT_ASSERT(args != RT_NULL);
+
+    *args = get_rtc_timestamp();
+    LOG_D("RTC: get rtc_time %x", *args);
+
+    return RT_EOK;
+}
+
+/* Set RTC seconds */
+static rt_err_t _rtc_set_secs(time_t *args)
+{
+    rt_err_t result = RT_EOK;
+
+    RT_ASSERT(args != RT_NULL);
+
+    if (set_rtc_time_stamp(*args) != RT_EOK)
+    {
+        result = -RT_ERROR;
+    }
+    LOG_D("RTC: set rtc_time %x", *args);
+
+    return result;
+}
+
+/* Get RTC alarm */
+static rt_err_t _rtc_get_alarm(struct rt_rtc_wkalarm *wkalarm)
+{
+    rtc_datetime_t datetime;
+
+    RT_ASSERT(wkalarm != RT_NULL);
+
+    /* Get alarm time from RTC */
+    RTC_GetAlarm(RTC0, &datetime);
+
+    /* Convert to wkalarm format */
+    wkalarm->tm_sec  = datetime.second;
+    wkalarm->tm_min  = datetime.minute;
+    wkalarm->tm_hour = datetime.hour;
+    wkalarm->tm_mday = datetime.day;
+    wkalarm->tm_mon  = datetime.month - 1;
+    wkalarm->tm_year = datetime.year - 1900;
+
+    /* Check if alarm is enabled */
+    wkalarm->enable = (RTC_GetEnabledInterrupts(RTC0) & kRTC_AlarmInterruptEnable) ? 1 : 0;
+
+    LOG_D("RTC: get alarm %04d-%02d-%02d %02d:%02d:%02d (%s)",
+          datetime.year, datetime.month, datetime.day,
+          datetime.hour, datetime.minute, datetime.second,
+          wkalarm->enable ? "ENABLED" : "DISABLED");
+
+    return RT_EOK;
+}
+
+/* Set RTC alarm */
+static rt_err_t _rtc_set_alarm(struct rt_rtc_wkalarm *wkalarm)
+{
+    rtc_datetime_t datetime;
+
+    RT_ASSERT(wkalarm != RT_NULL);
+
+    /* Convert from wkalarm format */
+    datetime.year   = wkalarm->tm_year + 1900;
+    datetime.month  = wkalarm->tm_mon + 1;
+    datetime.day    = wkalarm->tm_mday;
+    datetime.hour   = wkalarm->tm_hour;
+    datetime.minute = wkalarm->tm_min;
+    datetime.second = wkalarm->tm_sec;
+
+    /* Set alarm time */
+    RTC_SetAlarm(RTC0, &datetime);
+
+    /* Enable/disable alarm interrupt */
+    if (wkalarm->enable)
+    {
+        RTC_EnableInterrupts(RTC0, kRTC_AlarmInterruptEnable);
+        EnableIRQ(RTC_IRQn);  /* Use RTC_IRQn instead of RTC0_IRQn */
+        LOG_D("RTC alarm enabled");
+    }
+    else
+    {
+        RTC_DisableInterrupts(RTC0, kRTC_AlarmInterruptEnable);
+        LOG_D("RTC alarm disabled");
+    }
+
+    LOG_D("RTC: set alarm %04d-%02d-%02d %02d:%02d:%02d",
+          datetime.year, datetime.month, datetime.day,
+          datetime.hour, datetime.minute, datetime.second);
+
+    return RT_EOK;
+}
+
+/* RTC operations structure */
+static const struct rt_rtc_ops _rtc_ops =
+{
+    _rtc_init,
+    _rtc_get_secs,
+    _rtc_set_secs,
+    _rtc_get_alarm,
+    _rtc_set_alarm,
+    RT_NULL,  /* get_timeval */
+    RT_NULL,  /* set_timeval */
+};
+
+static rt_rtc_dev_t mcxa_rtc_dev;
+
+/* RTC interrupt handler */
+void RTC_IRQHandler(void)
+{
+    rt_interrupt_enter();
+
+    /* Get interrupt status */
+    uint32_t status = RTC_GetStatusFlags(RTC0);
+
+    /* Handle alarm interrupt */
+    if (status & kRTC_AlarmFlag)
+    {
+        /* Clear alarm flag */
+        RTC_ClearStatusFlags(RTC0, kRTC_AlarmFlag);
+
+        LOG_D("RTC alarm triggered");
+
+        /* If alarm framework is available, notify it */
+#ifdef RT_USING_ALARM
+        /* Send alarm event to alarm thread */
+        rt_event_send(&_container.event, 1);
+#endif
+    }
+
+    /* Handle seconds interrupt if needed */
+    if (status & kRTC_SecondsInterruptEnable)
+    {
+        LOG_D("RTC seconds interrupt");
+    }
+
+    rt_interrupt_leave();
+}
+
+/* Hardware RTC initialization */
+int rt_hw_rtc_init(void)
+{
+    rt_err_t result;
+
+    /* Set RTC operations */
+    mcxa_rtc_dev.ops = &_rtc_ops;
+
+    /* Register RTC device */
+    result = rt_hw_rtc_register(&mcxa_rtc_dev, "rtc", RT_DEVICE_FLAG_RDWR, RT_NULL);
+    if (result != RT_EOK)
+    {
+        LOG_E("RTC register failed, err code: %d", result);
+        return result;
+    }
+
+    LOG_D("RTC init success");
+    return RT_EOK;
+}
+
+INIT_DEVICE_EXPORT(rt_hw_rtc_init);
+
+#endif /* BSP_USING_RTC */

bsp/nxp/mcx/mcxa/Libraries/drivers/drv_spi.c

@@ -10,9 +10,13 @@
 #include "rtdevice.h"
 #include "drv_spi.h"
 #include "fsl_lpspi.h"
-#include "fsl_lpspi_edma.h"
 
-#define DMA_MAX_TRANSFER_SIZE (32767)
+
+#ifdef RT_USING_SPI
+
+#define DBG_TAG    "drv.spi"
+#define DBG_LVL    DBG_INFO
+#include <rtdbg.h>
 
 enum
 {
@@ -32,14 +36,6 @@ struct lpc_spi
     clock_div_name_t            clock_div_name;
     clock_name_t                clock_name;
 
-    DMA_Type                    *DMAx;
-    uint8_t                     tx_dma_chl;
-    uint8_t                     rx_dma_chl;
-    edma_handle_t               dma_tx_handle;
-    edma_handle_t               dma_rx_handle;
-    dma_request_source_t        tx_dma_request;
-    dma_request_source_t        rx_dma_request;
-    lpspi_master_edma_handle_t  spi_dma_handle;
 
     rt_sem_t                    sem;
     char                        *name;
@@ -50,28 +46,26 @@ static struct lpc_spi lpc_obj[] =
 #ifdef BSP_USING_SPI0
     {
         .LPSPIx = LPSPI0,
+#if (defined(CPU_MCXA346VLH) || defined(CPU_MCXA346VLL) || defined(CPU_MCXA346VLQ) || defined(CPU_MCXA346VPN))
+        kFRO_LF_DIV_to_LPSPI0,
+#else
         .clock_attach_id = kFRO12M_to_LPSPI0,
+#endif
         .clock_div_name = kCLOCK_DivLPSPI0,
         .clock_name = kCLOCK_Fro12M,
-        .tx_dma_request = kDma0RequestLPSPI0Tx,
-        .rx_dma_request = kDma0RequestLPSPI0Rx,
-        .DMAx = DMA0,
-        .tx_dma_chl = 0,
-        .rx_dma_chl = 1,
         .name = "spi0",
     },
 #endif
 #ifdef BSP_USING_SPI1
     {
         .LPSPIx = LPSPI1,
+#if (defined(CPU_MCXA346VLH) || defined(CPU_MCXA346VLL) || defined(CPU_MCXA346VLQ) || defined(CPU_MCXA346VPN))
+        kFRO_LF_DIV_to_LPSPI1,
+#else
         .clock_attach_id = kFRO12M_to_LPSPI1,
+#endif
         .clock_div_name = kCLOCK_DivLPSPI1,
         .clock_name = kCLOCK_Fro12M,
-        .tx_dma_request = kDma0RequestLPSPI1Tx,
-        .rx_dma_request = kDma0RequestLPSPI1Rx,
-        .DMAx = DMA0,
-        .tx_dma_chl = 0,
-        .rx_dma_chl = 1,
         .name = "spi1",
     },
 #endif
@@ -93,17 +87,12 @@ static rt_err_t spi_configure(struct rt_spi_device *device, struct rt_spi_config
     return RT_EOK;
 }
 
-static void LPSPI_MasterUserCallback(LPSPI_Type *base, lpspi_master_edma_handle_t *handle, status_t status, void *userData)
-{
-    struct lpc_spi *spi = (struct lpc_spi *)userData;
-    rt_sem_release(spi->sem);
 
-}
 
 static rt_ssize_t spixfer(struct rt_spi_device *device, struct rt_spi_message *message)
 {
-    int i;
     lpspi_transfer_t transfer = {0};
+    status_t status;
 
     RT_ASSERT(device != RT_NULL);
     RT_ASSERT(device->bus != RT_NULL);
@@ -119,40 +108,25 @@ static rt_ssize_t spixfer(struct rt_spi_device *device, struct rt_spi_message *m
     transfer.dataSize = message->length;
     transfer.rxData   = (uint8_t *)(message->recv_buf);
     transfer.txData   = (uint8_t *)(message->send_buf);
+    transfer.configFlags = kLPSPI_MasterPcs0;
 
-    /*  if(message->length < MAX_DMA_TRANSFER_SIZE)*/
-    uint32_t block, remain;
-    block = message->length / DMA_MAX_TRANSFER_SIZE;
-    remain = message->length % DMA_MAX_TRANSFER_SIZE;
-
-    for (i = 0; i < block; i++)
-    {
-        transfer.dataSize = DMA_MAX_TRANSFER_SIZE;
-        if (message->recv_buf) transfer.rxData   = (uint8_t *)(message->recv_buf + i *DMA_MAX_TRANSFER_SIZE);
-        if (message->send_buf) transfer.txData   = (uint8_t *)(message->send_buf + i *DMA_MAX_TRANSFER_SIZE);
-
-        LPSPI_MasterTransferEDMA(spi->LPSPIx, &spi->spi_dma_handle, &transfer);
-        rt_sem_take(spi->sem, RT_WAITING_FOREVER);
-    }
+    // Use blocking transfer instead of DMA
+    status = LPSPI_MasterTransferBlocking(spi->LPSPIx, &transfer);
 
-    if (remain)
+    if (message->cs_release)
     {
-        transfer.dataSize = remain;
-        if (message->recv_buf) transfer.rxData   = (uint8_t *)(message->recv_buf + i *DMA_MAX_TRANSFER_SIZE);
-        if (message->send_buf) transfer.txData   = (uint8_t *)(message->send_buf + i *DMA_MAX_TRANSFER_SIZE);
-
-        LPSPI_MasterTransferEDMA(spi->LPSPIx, &spi->spi_dma_handle, &transfer);
-        rt_sem_take(spi->sem, RT_WAITING_FOREVER);
+        rt_pin_write(device->cs_pin, PIN_HIGH);
     }
 
-    if (message->cs_release)
+    if (status != kStatus_Success)
     {
-        rt_pin_write(device->cs_pin, PIN_HIGH);
+        return 0; // Transfer failed
     }
 
     return message->length;
 }
 
+
 static struct rt_spi_ops lpc_spi_ops =
 {
     .configure = spi_configure,
@@ -173,23 +147,18 @@ int rt_hw_spi_init(void)
 
         lpspi_master_config_t masterConfig;
         LPSPI_MasterGetDefaultConfig(&masterConfig);
-        masterConfig.baudRate = 1 * 1000 * 1000;
+        masterConfig.baudRate = 10 * 1000 * 1000;
         masterConfig.pcsToSckDelayInNanoSec        = 1000000000U / masterConfig.baudRate * 1U;
         masterConfig.lastSckToPcsDelayInNanoSec    = 1000000000U / masterConfig.baudRate * 1U;
         masterConfig.betweenTransferDelayInNanoSec = 1000000000U / masterConfig.baudRate * 1U;
 
         LPSPI_MasterInit(lpc_obj[i].LPSPIx, &masterConfig, CLOCK_GetFreq(lpc_obj[i].clock_name));
 
-        EDMA_CreateHandle(&lpc_obj[i].dma_tx_handle, lpc_obj[i].DMAx, lpc_obj[i].tx_dma_chl);
-        EDMA_CreateHandle(&lpc_obj[i].dma_rx_handle, lpc_obj[i].DMAx, lpc_obj[i].rx_dma_chl);
-
-        EDMA_SetChannelMux(lpc_obj[i].DMAx, lpc_obj[i].tx_dma_chl, lpc_obj[i].tx_dma_request);
-        EDMA_SetChannelMux(lpc_obj[i].DMAx, lpc_obj[i].rx_dma_chl, lpc_obj[i].rx_dma_request);
-
-        LPSPI_MasterTransferCreateHandleEDMA(lpc_obj[i].LPSPIx, &lpc_obj[i].spi_dma_handle, LPSPI_MasterUserCallback, &lpc_obj[i], &lpc_obj[i].dma_rx_handle, &lpc_obj[i].dma_tx_handle);
-
         rt_spi_bus_register(&lpc_obj[i].parent, lpc_obj[i].name, &lpc_spi_ops);
     }
     return RT_EOK;
 }
 INIT_DEVICE_EXPORT(rt_hw_spi_init);
+
+#endif /* RT_USING_SPI */
+

bsp/nxp/mcx/mcxa/Libraries/drivers/drv_uart.c

@@ -14,6 +14,10 @@
 
 #ifdef RT_USING_SERIAL
 
+#define DBG_TAG    "drv.uart"
+#define DBG_LVL    DBG_INFO
+#include <rtdbg.h>
+
 struct mcx_uart
 {
     struct rt_serial_device     *serial;

bsp/nxp/mcx/mcxa/frdm-mcxa346/applications/drv_spi_sample_rw007.c

@@ -0,0 +1,73 @@
+#include <rtthread.h>
+
+#ifdef BSP_USING_RW007
+#include <rtdbg.h>
+#include <rtdevice.h>
+#include <board.h>
+#include <spi_wifi_rw007.h>
+
+#define BOARD_RW007_DEVICE_NAME "rw007"
+
+extern void spi_wifi_isr(int vector);
+
+static void rw007_gpio_init(void)
+{
+    /* Configure IO */
+    rt_pin_mode(BOARD_RW007_RST_PIN, PIN_MODE_OUTPUT);
+    rt_pin_mode(BOARD_RW007_INT_BUSY_PIN, PIN_MODE_INPUT_PULLDOWN);
+
+    /* Reset rw007 and config mode */
+    rt_pin_write(BOARD_RW007_RST_PIN, PIN_LOW);
+
+    rt_thread_delay(rt_tick_from_millisecond(100));
+    rt_pin_write(BOARD_RW007_RST_PIN, PIN_HIGH);
+
+    /* Wait rw007 ready(exit busy stat) */
+    while (!rt_pin_read(BOARD_RW007_INT_BUSY_PIN))
+    {
+        rt_thread_delay(5);
+    }
+
+    rt_thread_delay(rt_tick_from_millisecond(200));
+    rt_pin_mode(BOARD_RW007_INT_BUSY_PIN, PIN_MODE_INPUT_PULLUP);
+}
+
+int wifi_spi_device_init(void)
+{
+    int ret = 0;
+    char sn_version[32];
+
+    struct rt_spi_device *spi_device = rt_malloc(sizeof(struct rt_spi_device));
+    if (!spi_device) return -1;
+
+    rw007_gpio_init();
+    ret = rt_spi_bus_attach_device_cspin(spi_device, BOARD_RW007_DEVICE_NAME, BOARD_RW007_SPI_BUS_NAME, BOARD_RW007_CS_PIN, RT_NULL);
+    if (ret != RT_EOK) return -2;
+
+    rt_hw_wifi_init("rw007");
+
+    rt_wlan_set_mode(RT_WLAN_DEVICE_STA_NAME, RT_WLAN_STATION);
+    rt_wlan_set_mode(RT_WLAN_DEVICE_AP_NAME, RT_WLAN_AP);
+
+    rw007_sn_get(sn_version);
+    rt_kprintf("\nrw007  sn: [%s]\n", sn_version);
+    rw007_version_get(sn_version);
+    rt_kprintf("rw007 ver: [%s]\n\n", sn_version);
+
+    return 0;
+}
+INIT_APP_EXPORT(wifi_spi_device_init);
+
+static void int_wifi_irq(void *p)
+{
+    ((void)p);
+    spi_wifi_isr(0);
+}
+
+void spi_wifi_hw_init(void)
+{
+    rt_pin_attach_irq(BOARD_RW007_INT_BUSY_PIN, PIN_IRQ_MODE_FALLING, int_wifi_irq, 0);
+    rt_pin_irq_enable(BOARD_RW007_INT_BUSY_PIN, RT_TRUE);
+}
+
+#endif

bsp/nxp/mcx/mcxa/frdm-mcxa346/applications/main.c

@@ -9,18 +9,27 @@
  * 2019-10-24     Magicoe      first version
  * 2020-01-10     Kevin/Karl   Add PS demo
  * 2020-09-21     supperthomas fix the main.c
+ * 2025-08-18     Alex Yang    Add P1_7 button with LED blink control
  *
  */
 
 #include <rtdevice.h>
 #include "drv_pin.h"
 
-#define LED_PIN        ((3*32)+18)
+#define LED_PIN        ((3*32)+18)  /* Original LED pin */
+#define BUTTON_PIN     ((1*32)+7)   /* P1_7 button pin */
 
-int main(void)
-{
+static rt_bool_t led_state = RT_FALSE;        /* Current LED state */
 
 
+/* Button interrupt callback function */
+void button_irq_callback(void *args)
+{
+    rt_kprintf("SW2 pressed\n");
+}
+
+int main(void)
+{
 #if defined(__CC_ARM)
     rt_kprintf("using armcc, version: %d\n", __ARMCC_VERSION);
 #elif defined(__clang__)
@@ -31,16 +40,26 @@ int main(void)
     rt_kprintf("using gcc, version: %d.%d\n", __GNUC__, __GNUC_MINOR__);
 #endif
 
-    rt_kprintf("MCXA346 HelloWorld\r\n");
-    rt_pin_mode(LED_PIN, PIN_MODE_OUTPUT);  /* Set GPIO as Output */
+    rt_kprintf("FRDM-MCXA346\r\n");
+
+    /* Configure LED pin as output */
+    rt_pin_mode(LED_PIN, PIN_MODE_OUTPUT);
+    rt_pin_write(LED_PIN, PIN_LOW);
+
+    /* Configure button pin as input with pull-up */
+    rt_pin_mode(BUTTON_PIN, PIN_MODE_INPUT_PULLUP);
+
+    /* Attach interrupt to button pin */
+    rt_pin_attach_irq(BUTTON_PIN, PIN_IRQ_MODE_FALLING, button_irq_callback, RT_NULL);
+    rt_pin_irq_enable(BUTTON_PIN, PIN_IRQ_ENABLE);
 
     while (1)
     {
-        rt_pin_write(LED_PIN, PIN_HIGH);    /* Set GPIO output 1 */
-        rt_thread_mdelay(500);               /* Delay 500mS */
-        rt_pin_write(LED_PIN, PIN_LOW);     /* Set GPIO output 0 */
-        rt_thread_mdelay(500);               /* Delay 500mS */
+        /* Toggle LED state */
+        led_state = !led_state;
+
+        rt_pin_write(LED_PIN, led_state ? PIN_HIGH : PIN_LOW);
+
+        rt_thread_mdelay(500);
     }
 }
-
-// end file

bsp/nxp/mcx/mcxa/frdm-mcxa346/board/Kconfig

@@ -40,11 +40,8 @@ menu "On-chip Peripheral Drivers"
             default y
 
             if BSP_USING_I2C
-                config BSP_USING_I2C0
-                    bool "Enable Flexcomm0 I2C"
-                    default y
-                config BSP_USING_I2C1
-                    bool "Enable Flexcomm1 I2C"
+                config BSP_USING_I2C3
+                    bool "Enable Flexcomm3 I2C"
                     default y
             endif
 
@@ -67,26 +64,8 @@ menu "On-chip Peripheral Drivers"
             default y
 
             if BSP_USING_ADC
-                config BSP_USING_ADC0_CH0
-                    bool "Enable ADC0 Channel0"
-                    default y
-
-                config BSP_USING_ADC0_CH1
-                    bool "Enable ADC0 Channel1"
-                    default n
-
-                config BSP_USING_ADC0_CH8
-                    bool "Enable ADC0 Channel8"
-                    default n
-
-        
-                config BSP_USING_ADC0_CH13
-                    bool "Enable ADC0 Channel13"
-                    default n
-
-
-                config BSP_USING_ADC0_CH26
-                    bool "Enable ADC0 Channel26"
+                config BSP_USING_ADC0_CH22
+                    bool "Enable ADC0 Channel22"
                     default n
 
             endif
@@ -162,15 +141,15 @@ menu "Board extended module Drivers"
 
         config BOARD_RW007_CS_PIN
             hex "CS pin index"
-            default 0x46
+            default 107
 
         config BOARD_RW007_INT_BUSY_PIN
             hex "INT/BUSY pin index"
-            default 0x71
+            default 109
 
         config BOARD_RW007_RST_PIN
             hex "RESET pin index"
-            default 0x2F
+            default 131
     endif
 
         

bsp/nxp/mcx/mcxa/frdm-mcxa346/board/MCUX_Config/board/pin_mux.c

@@ -14,6 +14,7 @@
 
 #include "fsl_common.h"
 #include "fsl_port.h"
+#include "fsl_edma.h"
 #include "pin_mux.h"
 
 
@@ -22,34 +23,40 @@ void BOARD_InitBootPins(void)
     BOARD_InitPins();
 }
 
+static void release_reset_array(const reset_ip_name_t *resets, uint32_t count)
+{
+    for (uint32_t i = 0; i < count; i++) {
+        RESET_ReleasePeripheralReset(resets[i]);
+    }
+}
+
 void BOARD_InitPins(void)
 {
-    /* Enable all PORT clocks */
-    CLOCK_EnableClock(kCLOCK_GatePORT0);
-    CLOCK_EnableClock(kCLOCK_GatePORT1);
-    CLOCK_EnableClock(kCLOCK_GatePORT2);
-    CLOCK_EnableClock(kCLOCK_GatePORT3);
-
-    /* Enable all GPIO clocks */
-    CLOCK_EnableClock(kCLOCK_GateGPIO0);
-    CLOCK_EnableClock(kCLOCK_GateGPIO1);
-    CLOCK_EnableClock(kCLOCK_GateGPIO2);
-    CLOCK_EnableClock(kCLOCK_GateGPIO3);
-
-    /* Release all PORT resets */
-    RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn);
-    RESET_ReleasePeripheralReset(kPORT1_RST_SHIFT_RSTn);
-    RESET_ReleasePeripheralReset(kPORT2_RST_SHIFT_RSTn);
-    RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn);
-
-    RESET_ReleasePeripheralReset(kGPIO0_RST_SHIFT_RSTn);
-    RESET_ReleasePeripheralReset(kGPIO1_RST_SHIFT_RSTn);
-    RESET_ReleasePeripheralReset(kGPIO2_RST_SHIFT_RSTn);
-    RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn);
-
-    RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn);
-    RESET_ReleasePeripheralReset(kLPUART1_RST_SHIFT_RSTn);
-    RESET_ReleasePeripheralReset(kLPUART2_RST_SHIFT_RSTn);
+    static const clock_ip_name_t port_clocks[] = PORT_CLOCKS;
+    static const clock_ip_name_t gpio_clocks[] = GPIO_CLOCKS;
+
+    // Enable clocks
+    for (uint32_t i = 0; i < ARRAY_SIZE(port_clocks); i++) {
+        CLOCK_EnableClock(port_clocks[i]);
+        CLOCK_EnableClock(gpio_clocks[i]);
+    }
+
+    // SDK predefined reset arrays
+    static const reset_ip_name_t port_resets[] = PORT_RSTS_N;
+    static const reset_ip_name_t gpio_resets[] = GPIO_RSTS_N;
+    static const reset_ip_name_t uart_resets[] = LPUART_RSTS;
+    static const reset_ip_name_t i2c_resets[] = LPI2C_RSTS;
+    static const reset_ip_name_t spi_resets[] = LPSPI_RSTS;
+    static const reset_ip_name_t dma_resets[] = DMA_RSTS_N;
+
+    // Release resets
+    release_reset_array(port_resets, ARRAY_SIZE(port_resets));
+    release_reset_array(gpio_resets, ARRAY_SIZE(gpio_resets));
+    release_reset_array(uart_resets, ARRAY_SIZE(uart_resets));
+    release_reset_array(i2c_resets, ARRAY_SIZE(i2c_resets));
+    release_reset_array(spi_resets, ARRAY_SIZE(spi_resets));
+    release_reset_array(dma_resets, ARRAY_SIZE(dma_resets));
+
 
     const port_pin_config_t port2_2_pin35_config = {/* Internal pull-up resistor is enabled */
                                                     .pullSelect = kPORT_PullUp,
@@ -125,5 +132,357 @@ void BOARD_InitPins(void)
                                        /* Pin Control Register fields [15:0] are not locked */
                                        .lockRegister = kPORT_UnlockRegister};
     /* PORT3_18 (pin 86) is configured as P3_18 */
-    PORT_SetPinConfig(PORT3, 18, &LED_RED);
+    PORT_SetPinConfig(BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, &LED_RED);
+
+    const port_pin_config_t LED_GREEN = {/* Internal pull-up/down resistor is disabled */
+                                         .pullSelect = kPORT_PullDisable,
+                                         /* Low internal pull resistor value is selected. */
+                                         .pullValueSelect = kPORT_LowPullResistor,
+                                         /* Fast slew rate is configured */
+                                         .slewRate = kPORT_FastSlewRate,
+                                         /* Passive input filter is disabled */
+                                         .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                         /* Open drain output is disabled */
+                                         .openDrainEnable = kPORT_OpenDrainDisable,
+                                         /* Low drive strength is configured */
+                                         .driveStrength = kPORT_LowDriveStrength,
+                                         /* Normal drive strength is configured */
+                                         .driveStrength1 = kPORT_NormalDriveStrength,
+                                         /* Pin is configured as P3_19 */
+                                         .mux = kPORT_MuxAlt0,
+                                         /* Digital input enabled */
+                                         .inputBuffer = kPORT_InputBufferEnable,
+                                         /* Digital input is not inverted */
+                                         .invertInput = kPORT_InputNormal,
+                                         /* Pin Control Register fields [15:0] are not locked */
+                                         .lockRegister = kPORT_UnlockRegister};
+    /* PORT3_19 (pin 85) is configured as P3_19 */
+    PORT_SetPinConfig(BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, &LED_GREEN);
+
+    const port_pin_config_t LED_BLUE = {/* Internal pull-up/down resistor is disabled */
+                                        .pullSelect = kPORT_PullDisable,
+                                        /* Low internal pull resistor value is selected. */
+                                        .pullValueSelect = kPORT_LowPullResistor,
+                                        /* Fast slew rate is configured */
+                                        .slewRate = kPORT_FastSlewRate,
+                                        /* Passive input filter is disabled */
+                                        .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                        /* Open drain output is disabled */
+                                        .openDrainEnable = kPORT_OpenDrainDisable,
+                                        /* Low drive strength is configured */
+                                        .driveStrength = kPORT_LowDriveStrength,
+                                        /* Normal drive strength is configured */
+                                        .driveStrength1 = kPORT_NormalDriveStrength,
+                                        /* Pin is configured as P3_21 */
+                                        .mux = kPORT_MuxAlt0,
+                                        /* Digital input enabled */
+                                        .inputBuffer = kPORT_InputBufferEnable,
+                                        /* Digital input is not inverted */
+                                        .invertInput = kPORT_InputNormal,
+                                        /* Pin Control Register fields [15:0] are not locked */
+                                        .lockRegister = kPORT_UnlockRegister};
+    /* PORT3_21 (pin 82) is configured as P3_21 */
+    PORT_SetPinConfig(BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, &LED_BLUE);
+
+
+    const port_pin_config_t port1_8_pin1_config = {/* Internal pull-up/down resistor is disabled */
+                                                   .pullSelect = kPORT_PullDisable,
+                                                   /* Low internal pull resistor value is selected. */
+                                                   .pullValueSelect = kPORT_LowPullResistor,
+                                                   /* Fast slew rate is configured */
+                                                   .slewRate = kPORT_FastSlewRate,
+                                                   /* Passive input filter is disabled */
+                                                   .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                                   /* Open drain output is disabled */
+                                                   .openDrainEnable = kPORT_OpenDrainDisable,
+                                                   /* Low drive strength is configured */
+                                                   .driveStrength = kPORT_LowDriveStrength,
+                                                   /* Normal drive strength is configured */
+                                                   .driveStrength1 = kPORT_NormalDriveStrength,
+                                                   /* Pin is configured as LPI2C2_SDA */
+                                                   .mux = kPORT_MuxAlt3,
+                                                   /* Digital input enabled */
+                                                   .inputBuffer = kPORT_InputBufferEnable,
+                                                   /* Digital input is not inverted */
+                                                   .invertInput = kPORT_InputNormal,
+                                                   /* Pin Control Register fields [15:0] are not locked */
+                                                   .lockRegister = kPORT_UnlockRegister};
+    /* PORT1_8 (pin 1) is configured as LPI2C2_SDA */
+    PORT_SetPinConfig(PORT1, 8U, &port1_8_pin1_config);
+
+    const port_pin_config_t port1_9_pin2_config = {/* Internal pull-up/down resistor is disabled */
+                                                   .pullSelect = kPORT_PullDisable,
+                                                   /* Low internal pull resistor value is selected. */
+                                                   .pullValueSelect = kPORT_LowPullResistor,
+                                                   /* Fast slew rate is configured */
+                                                   .slewRate = kPORT_FastSlewRate,
+                                                   /* Passive input filter is disabled */
+                                                   .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                                   /* Open drain output is disabled */
+                                                   .openDrainEnable = kPORT_OpenDrainDisable,
+                                                   /* Low drive strength is configured */
+                                                   .driveStrength = kPORT_LowDriveStrength,
+                                                   /* Normal drive strength is configured */
+                                                   .driveStrength1 = kPORT_NormalDriveStrength,
+                                                   /* Pin is configured as LPI2C2_SCL */
+                                                   .mux = kPORT_MuxAlt3,
+                                                   /* Digital input enabled */
+                                                   .inputBuffer = kPORT_InputBufferEnable,
+                                                   /* Digital input is not inverted */
+                                                   .invertInput = kPORT_InputNormal,
+                                                   /* Pin Control Register fields [15:0] are not locked */
+                                                   .lockRegister = kPORT_UnlockRegister};
+    /* PORT1_9 (pin 2) is configured as LPI2C2_SCL */
+    PORT_SetPinConfig(PORT1, 9U, &port1_9_pin2_config);
+
+    const port_pin_config_t port3_27_pin74_config = {/* Internal pull-up/down resistor is disabled */
+                                                     .pullSelect = kPORT_PullDisable,
+                                                     /* Low internal pull resistor value is selected. */
+                                                     .pullValueSelect = kPORT_LowPullResistor,
+                                                     /* Fast slew rate is configured */
+                                                     .slewRate = kPORT_FastSlewRate,
+                                                     /* Passive input filter is disabled */
+                                                     .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                                     /* Open drain output is disabled */
+                                                     .openDrainEnable = kPORT_OpenDrainDisable,
+                                                     /* Low drive strength is configured */
+                                                     .driveStrength = kPORT_LowDriveStrength,
+                                                     /* Normal drive strength is configured */
+                                                     .driveStrength1 = kPORT_NormalDriveStrength,
+                                                     /* Pin is configured as LPI2C3_SCL */
+                                                     .mux = kPORT_MuxAlt2,
+                                                     /* Digital input enabled */
+                                                     .inputBuffer = kPORT_InputBufferEnable,
+                                                     /* Digital input is not inverted */
+                                                     .invertInput = kPORT_InputNormal,
+                                                     /* Pin Control Register fields [15:0] are not locked */
+                                                     .lockRegister = kPORT_UnlockRegister};
+    /* PORT3_27 (pin 74) is configured as LPI2C3_SCL */
+    PORT_SetPinConfig(PORT3, 27U, &port3_27_pin74_config);
+
+    const port_pin_config_t port3_28_pin73_config = {/* Internal pull-up/down resistor is disabled */
+                                                     .pullSelect = kPORT_PullDisable,
+                                                     /* Low internal pull resistor value is selected. */
+                                                     .pullValueSelect = kPORT_LowPullResistor,
+                                                     /* Fast slew rate is configured */
+                                                     .slewRate = kPORT_FastSlewRate,
+                                                     /* Passive input filter is disabled */
+                                                     .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                                     /* Open drain output is disabled */
+                                                     .openDrainEnable = kPORT_OpenDrainDisable,
+                                                     /* Low drive strength is configured */
+                                                     .driveStrength = kPORT_LowDriveStrength,
+                                                     /* Normal drive strength is configured */
+                                                     .driveStrength1 = kPORT_NormalDriveStrength,
+                                                     /* Pin is configured as LPI2C3_SDA */
+                                                     .mux = kPORT_MuxAlt2,
+                                                     /* Digital input enabled */
+                                                     .inputBuffer = kPORT_InputBufferEnable,
+                                                     /* Digital input is not inverted */
+                                                     .invertInput = kPORT_InputNormal,
+                                                     /* Pin Control Register fields [15:0] are not locked */
+                                                     .lockRegister = kPORT_UnlockRegister};
+    /* PORT3_28 (pin 73) is configured as LPI2C3_SDA */
+    PORT_SetPinConfig(PORT3, 28U, &port3_28_pin73_config);
+
+
+    const port_pin_config_t port1_0_pin135_config = {/* Internal pull-up/down resistor is disabled */
+                                                     .pullSelect = kPORT_PullDisable,
+                                                     /* Low internal pull resistor value is selected. */
+                                                     .pullValueSelect = kPORT_LowPullResistor,
+                                                     /* Fast slew rate is configured */
+                                                     .slewRate = kPORT_FastSlewRate,
+                                                     /* Passive input filter is disabled */
+                                                     .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                                     /* Open drain output is disabled */
+                                                     .openDrainEnable = kPORT_OpenDrainDisable,
+                                                     /* Low drive strength is configured */
+                                                     .driveStrength = kPORT_LowDriveStrength,
+                                                     /* Normal drive strength is configured */
+                                                     .driveStrength1 = kPORT_NormalDriveStrength,
+                                                     /* Pin is configured as LPSPI0_SDO */
+                                                     .mux = kPORT_MuxAlt2,
+                                                     /* Digital input enabled */
+                                                     .inputBuffer = kPORT_InputBufferEnable,
+                                                     /* Digital input is not inverted */
+                                                     .invertInput = kPORT_InputNormal,
+                                                     /* Pin Control Register fields [15:0] are not locked */
+                                                     .lockRegister = kPORT_UnlockRegister};
+    /* PORT1_0 (pin 135) is configured as LPSPI0_SDO */
+    PORT_SetPinConfig(PORT1, 0U, &port1_0_pin135_config);
+
+    const port_pin_config_t port1_1_pin136_config = {/* Internal pull-up/down resistor is disabled */
+                                                     .pullSelect = kPORT_PullDisable,
+                                                     /* Low internal pull resistor value is selected. */
+                                                     .pullValueSelect = kPORT_LowPullResistor,
+                                                     /* Fast slew rate is configured */
+                                                     .slewRate = kPORT_FastSlewRate,
+                                                     /* Passive input filter is disabled */
+                                                     .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                                     /* Open drain output is disabled */
+                                                     .openDrainEnable = kPORT_OpenDrainDisable,
+                                                     /* Low drive strength is configured */
+                                                     .driveStrength = kPORT_LowDriveStrength,
+                                                     /* Normal drive strength is configured */
+                                                     .driveStrength1 = kPORT_NormalDriveStrength,
+                                                     /* Pin is configured as LPSPI0_SCK */
+                                                     .mux = kPORT_MuxAlt2,
+                                                     /* Digital input enabled */
+                                                     .inputBuffer = kPORT_InputBufferEnable,
+                                                     /* Digital input is not inverted */
+                                                     .invertInput = kPORT_InputNormal,
+                                                     /* Pin Control Register fields [15:0] are not locked */
+                                                     .lockRegister = kPORT_UnlockRegister};
+    /* PORT1_1 (pin 136) is configured as LPSPI0_SCK */
+    PORT_SetPinConfig(PORT1, 1U, &port1_1_pin136_config);
+
+    const port_pin_config_t port1_2_pin137_config = {/* Internal pull-up/down resistor is disabled */
+                                                     .pullSelect = kPORT_PullDisable,
+                                                     /* Low internal pull resistor value is selected. */
+                                                     .pullValueSelect = kPORT_LowPullResistor,
+                                                     /* Fast slew rate is configured */
+                                                     .slewRate = kPORT_FastSlewRate,
+                                                     /* Passive input filter is disabled */
+                                                     .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                                     /* Open drain output is disabled */
+                                                     .openDrainEnable = kPORT_OpenDrainDisable,
+                                                     /* Low drive strength is configured */
+                                                     .driveStrength = kPORT_LowDriveStrength,
+                                                     /* Normal drive strength is configured */
+                                                     .driveStrength1 = kPORT_NormalDriveStrength,
+                                                     /* Pin is configured as LPSPI0_SDI */
+                                                     .mux = kPORT_MuxAlt2,
+                                                     /* Digital input enabled */
+                                                     .inputBuffer = kPORT_InputBufferEnable,
+                                                     /* Digital input is not inverted */
+                                                     .invertInput = kPORT_InputNormal,
+                                                     /* Pin Control Register fields [15:0] are not locked */
+                                                     .lockRegister = kPORT_UnlockRegister};
+    /* PORT1_2 (pin 137) is configured as LPSPI0_SDI */
+    PORT_SetPinConfig(PORT1, 2U, &port1_2_pin137_config);
+
+    const port_pin_config_t port1_3_pin138_config = {/* Internal pull-up/down resistor is disabled */
+                                                     .pullSelect = kPORT_PullDisable,
+                                                     /* Low internal pull resistor value is selected. */
+                                                     .pullValueSelect = kPORT_LowPullResistor,
+                                                     /* Fast slew rate is configured */
+                                                     .slewRate = kPORT_FastSlewRate,
+                                                     /* Passive input filter is disabled */
+                                                     .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                                     /* Open drain output is disabled */
+                                                     .openDrainEnable = kPORT_OpenDrainDisable,
+                                                     /* Low drive strength is configured */
+                                                     .driveStrength = kPORT_LowDriveStrength,
+                                                     /* Normal drive strength is configured */
+                                                     .driveStrength1 = kPORT_NormalDriveStrength,
+                                                     /* Pin is configured as LPSPI0_PCS0 */
+                                                     .mux = kPORT_MuxAlt2,
+                                                     /* Digital input enabled */
+                                                     .inputBuffer = kPORT_InputBufferEnable,
+                                                     /* Digital input is not inverted */
+                                                     .invertInput = kPORT_InputNormal,
+                                                     /* Pin Control Register fields [15:0] are not locked */
+                                                     .lockRegister = kPORT_UnlockRegister};
+    /* PORT1_3 (pin 138) is configured as LPSPI0_PCS0 */
+    PORT_SetPinConfig(PORT1, 3U, &port1_3_pin138_config);
+
+    const port_pin_config_t port3_10_pin96_config = {/* Internal pull-up/down resistor is disabled */
+                                                     .pullSelect = kPORT_PullDisable,
+                                                     /* Low internal pull resistor value is selected. */
+                                                     .pullValueSelect = kPORT_LowPullResistor,
+                                                     /* Fast slew rate is configured */
+                                                     .slewRate = kPORT_FastSlewRate,
+                                                     /* Passive input filter is disabled */
+                                                     .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                                     /* Open drain output is disabled */
+                                                     .openDrainEnable = kPORT_OpenDrainDisable,
+                                                     /* Low drive strength is configured */
+                                                     .driveStrength = kPORT_LowDriveStrength,
+                                                     /* Normal drive strength is configured */
+                                                     .driveStrength1 = kPORT_NormalDriveStrength,
+                                                     /* Pin is configured as LPSPI1_SCK */
+                                                     .mux = kPORT_MuxAlt2,
+                                                     /* Digital input enabled */
+                                                     .inputBuffer = kPORT_InputBufferEnable,
+                                                     /* Digital input is not inverted */
+                                                     .invertInput = kPORT_InputNormal,
+                                                     /* Pin Control Register fields [15:0] are not locked */
+                                                     .lockRegister = kPORT_UnlockRegister};
+    /* PORT3_10 (pin 96) is configured as LPSPI1_SCK */
+    PORT_SetPinConfig(PORT3, 10U, &port3_10_pin96_config);
+
+    const port_pin_config_t port3_11_pin95_config = {/* Internal pull-up/down resistor is disabled */
+                                                     .pullSelect = kPORT_PullDisable,
+                                                     /* Low internal pull resistor value is selected. */
+                                                     .pullValueSelect = kPORT_LowPullResistor,
+                                                     /* Fast slew rate is configured */
+                                                     .slewRate = kPORT_FastSlewRate,
+                                                     /* Passive input filter is disabled */
+                                                     .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                                     /* Open drain output is disabled */
+                                                     .openDrainEnable = kPORT_OpenDrainDisable,
+                                                     /* Low drive strength is configured */
+                                                     .driveStrength = kPORT_LowDriveStrength,
+                                                     /* Normal drive strength is configured */
+                                                     .driveStrength1 = kPORT_NormalDriveStrength,
+                                                     /* Pin is configured as LPSPI1_PCS0 */
+                                                     .mux = kPORT_MuxAlt2,
+                                                     /* Digital input enabled */
+                                                     .inputBuffer = kPORT_InputBufferEnable,
+                                                     /* Digital input is not inverted */
+                                                     .invertInput = kPORT_InputNormal,
+                                                     /* Pin Control Register fields [15:0] are not locked */
+                                                     .lockRegister = kPORT_UnlockRegister};
+    /* PORT3_11 (pin 95) is configured as LPSPI1_PCS0 */
+    PORT_SetPinConfig(PORT3, 11U, &port3_11_pin95_config);
+
+    const port_pin_config_t port3_8_pin98_config = {/* Internal pull-up/down resistor is disabled */
+                                                    .pullSelect = kPORT_PullDisable,
+                                                    /* Low internal pull resistor value is selected. */
+                                                    .pullValueSelect = kPORT_LowPullResistor,
+                                                    /* Fast slew rate is configured */
+                                                    .slewRate = kPORT_FastSlewRate,
+                                                    /* Passive input filter is disabled */
+                                                    .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                                    /* Open drain output is disabled */
+                                                    .openDrainEnable = kPORT_OpenDrainDisable,
+                                                    /* Low drive strength is configured */
+                                                    .driveStrength = kPORT_LowDriveStrength,
+                                                    /* Normal drive strength is configured */
+                                                    .driveStrength1 = kPORT_NormalDriveStrength,
+                                                    /* Pin is configured as LPSPI1_SDO */
+                                                    .mux = kPORT_MuxAlt2,
+                                                    /* Digital input enabled */
+                                                    .inputBuffer = kPORT_InputBufferEnable,
+                                                    /* Digital input is not inverted */
+                                                    .invertInput = kPORT_InputNormal,
+                                                    /* Pin Control Register fields [15:0] are not locked */
+                                                    .lockRegister = kPORT_UnlockRegister};
+    /* PORT3_8 (pin 98) is configured as LPSPI1_SDO */
+    PORT_SetPinConfig(PORT3, 8U, &port3_8_pin98_config);
+
+    const port_pin_config_t port3_9_pin97_config = {/* Internal pull-up/down resistor is disabled */
+                                                    .pullSelect = kPORT_PullDisable,
+                                                    /* Low internal pull resistor value is selected. */
+                                                    .pullValueSelect = kPORT_LowPullResistor,
+                                                    /* Fast slew rate is configured */
+                                                    .slewRate = kPORT_FastSlewRate,
+                                                    /* Passive input filter is disabled */
+                                                    .passiveFilterEnable = kPORT_PassiveFilterDisable,
+                                                    /* Open drain output is disabled */
+                                                    .openDrainEnable = kPORT_OpenDrainDisable,
+                                                    /* Low drive strength is configured */
+                                                    .driveStrength = kPORT_LowDriveStrength,
+                                                    /* Normal drive strength is configured */
+                                                    .driveStrength1 = kPORT_NormalDriveStrength,
+                                                    /* Pin is configured as LPSPI1_SDI */
+                                                    .mux = kPORT_MuxAlt2,
+                                                    /* Digital input enabled */
+                                                    .inputBuffer = kPORT_InputBufferEnable,
+                                                    /* Digital input is not inverted */
+                                                    .invertInput = kPORT_InputNormal,
+                                                    /* Pin Control Register fields [15:0] are not locked */
+                                                    .lockRegister = kPORT_UnlockRegister};
+    /* PORT3_9 (pin 97) is configured as LPSPI1_SDI */
+    PORT_SetPinConfig(PORT3, 9U, &port3_9_pin97_config);
 }

bsp/nxp/mcx/mcxa/frdm-mcxa346/board/MCUX_Config/board/pin_mux.h

@@ -17,6 +17,45 @@
  * @{
  */
 
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITLEDSPINS_LED_RED_GPIO GPIO3                /*!<@brief GPIO peripheral base pointer */
+#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN 18U              /*!<@brief GPIO pin number */
+#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN_MASK (1U << 18U) /*!<@brief GPIO pin mask */
+
+/* Symbols to be used with PORT driver */
+#define BOARD_INITLEDSPINS_LED_RED_PORT PORT3                /*!<@brief PORT peripheral base pointer */
+#define BOARD_INITLEDSPINS_LED_RED_PIN 18U                   /*!<@brief PORT pin number */
+#define BOARD_INITLEDSPINS_LED_RED_PIN_MASK (1U << 18U)      /*!<@brief PORT pin mask */
+                                                             /* @} */
+
+/*! @name PORT3_19 (number 85), LED_GREEN
+  @{ */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITLEDSPINS_LED_GREEN_GPIO GPIO3                /*!<@brief GPIO peripheral base pointer */
+#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN 19U              /*!<@brief GPIO pin number */
+#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN_MASK (1U << 19U) /*!<@brief GPIO pin mask */
+
+/* Symbols to be used with PORT driver */
+#define BOARD_INITLEDSPINS_LED_GREEN_PORT PORT3                /*!<@brief PORT peripheral base pointer */
+#define BOARD_INITLEDSPINS_LED_GREEN_PIN 19U                   /*!<@brief PORT pin number */
+#define BOARD_INITLEDSPINS_LED_GREEN_PIN_MASK (1U << 19U)      /*!<@brief PORT pin mask */
+                                                               /* @} */
+
+/*! @name PORT3_21 (number 82), LED_BLUE
+  @{ */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITLEDSPINS_LED_BLUE_GPIO GPIO3                /*!<@brief GPIO peripheral base pointer */
+#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN 21U              /*!<@brief GPIO pin number */
+#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN_MASK (1U << 21U) /*!<@brief GPIO pin mask */
+
+/* Symbols to be used with PORT driver */
+#define BOARD_INITLEDSPINS_LED_BLUE_PORT PORT3                /*!<@brief PORT peripheral base pointer */
+#define BOARD_INITLEDSPINS_LED_BLUE_PIN 21U                   /*!<@brief PORT pin number */
+#define BOARD_INITLEDSPINS_LED_BLUE_PIN_MASK (1U << 21U)      /*!<@brief PORT pin mask */
+                                                              /* @} */
+
 /***********************************************************************************************************************
  * API
  **********************************************************************************************************************/

bsp/nxp/mcx/mcxa/frdm-mcxa346/board/board.c

@@ -63,16 +63,7 @@ void rt_hw_board_init()
 #endif
 }
 
-/**
- * This function will called when memory fault.
- */
-void MemManage_Handler(void)
-{
-    extern void HardFault_Handler(void);
 
-    rt_kprintf("Memory Fault!\n");
-    HardFault_Handler();
-}
 
 void rt_hw_us_delay(rt_uint32_t us)
 {
@@ -103,3 +94,14 @@ void rt_hw_us_delay(rt_uint32_t us)
         }
     }
 }
+
+/**
+ * This function will called when memory fault.
+ */
+void MemManage_Handler(void)
+{
+    extern void HardFault_Handler(void);
+
+    rt_kprintf("Memory Fault!\n");
+    HardFault_Handler();
+}

bsp/nxp/mcx/mcxa/frdm-mcxa346/project.uvoptx

@@ -194,6 +194,18 @@
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
+      <PathWithFileName>applications\drv_spi_sample_rw007.c</PathWithFileName>
+      <FilenameWithoutPath>drv_spi_sample_rw007.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>2</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
       <PathWithFileName>applications\main.c</PathWithFileName>
       <FilenameWithoutPath>main.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
@@ -209,7 +221,7 @@
     <RteFlg>0</RteFlg>
     <File>
       <GroupNumber>2</GroupNumber>
-      <FileNumber>2</FileNumber>
+      <FileNumber>3</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -221,7 +233,7 @@
     </File>
     <File>
       <GroupNumber>2</GroupNumber>
-      <FileNumber>3</FileNumber>
+      <FileNumber>4</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -233,7 +245,7 @@
     </File>
     <File>
       <GroupNumber>2</GroupNumber>
-      <FileNumber>4</FileNumber>
+      <FileNumber>5</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -245,7 +257,7 @@
     </File>
     <File>
       <GroupNumber>2</GroupNumber>
-      <FileNumber>5</FileNumber>
+      <FileNumber>6</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -257,7 +269,7 @@
     </File>
     <File>
       <GroupNumber>2</GroupNumber>
-      <FileNumber>6</FileNumber>
+      <FileNumber>7</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -269,7 +281,7 @@
     </File>
     <File>
       <GroupNumber>2</GroupNumber>
-      <FileNumber>7</FileNumber>
+      <FileNumber>8</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -281,7 +293,7 @@
     </File>
     <File>
       <GroupNumber>2</GroupNumber>
-      <FileNumber>8</FileNumber>
+      <FileNumber>9</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -293,7 +305,7 @@
     </File>
     <File>
       <GroupNumber>2</GroupNumber>
-      <FileNumber>9</FileNumber>
+      <FileNumber>10</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -313,7 +325,7 @@
     <RteFlg>0</RteFlg>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>10</FileNumber>
+      <FileNumber>11</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -325,7 +337,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>11</FileNumber>
+      <FileNumber>12</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -337,7 +349,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>12</FileNumber>
+      <FileNumber>13</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -349,7 +361,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>13</FileNumber>
+      <FileNumber>14</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -361,7 +373,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>14</FileNumber>
+      <FileNumber>15</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -373,7 +385,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>15</FileNumber>
+      <FileNumber>16</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -385,7 +397,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>16</FileNumber>
+      <FileNumber>17</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -397,7 +409,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>17</FileNumber>
+      <FileNumber>18</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -409,7 +421,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>18</FileNumber>
+      <FileNumber>19</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -421,7 +433,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>19</FileNumber>
+      <FileNumber>20</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -433,7 +445,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>20</FileNumber>
+      <FileNumber>21</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -445,7 +457,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>21</FileNumber>
+      <FileNumber>22</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -457,7 +469,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>22</FileNumber>
+      <FileNumber>23</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -469,7 +481,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>23</FileNumber>
+      <FileNumber>24</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -481,7 +493,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>24</FileNumber>
+      <FileNumber>25</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -493,7 +505,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>25</FileNumber>
+      <FileNumber>26</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -505,7 +517,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>26</FileNumber>
+      <FileNumber>27</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -517,7 +529,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>27</FileNumber>
+      <FileNumber>28</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -529,7 +541,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>28</FileNumber>
+      <FileNumber>29</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -541,7 +553,7 @@
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
-      <FileNumber>29</FileNumber>
+      <FileNumber>30</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -555,13 +567,13 @@
 
   <Group>
     <GroupName>Drivers</GroupName>
-    <tvExp>1</tvExp>
+    <tvExp>0</tvExp>
     <tvExpOptDlg>0</tvExpOptDlg>
     <cbSel>0</cbSel>
     <RteFlg>0</RteFlg>
     <File>
       <GroupNumber>4</GroupNumber>
-      <FileNumber>30</FileNumber>
+      <FileNumber>31</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -573,7 +585,7 @@
     </File>
     <File>
       <GroupNumber>4</GroupNumber>
-      <FileNumber>31</FileNumber>
+      <FileNumber>32</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -585,7 +597,7 @@
     </File>
     <File>
       <GroupNumber>4</GroupNumber>
-      <FileNumber>32</FileNumber>
+      <FileNumber>33</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -597,7 +609,7 @@
     </File>
     <File>
       <GroupNumber>4</GroupNumber>
-      <FileNumber>33</FileNumber>
+      <FileNumber>34</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -609,7 +621,7 @@
     </File>
     <File>
       <GroupNumber>4</GroupNumber>
-      <FileNumber>34</FileNumber>
+      <FileNumber>35</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -629,7 +641,7 @@
     <RteFlg>0</RteFlg>
     <File>
       <GroupNumber>5</GroupNumber>
-      <FileNumber>35</FileNumber>
+      <FileNumber>36</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -641,31 +653,31 @@
     </File>
     <File>
       <GroupNumber>5</GroupNumber>
-      <FileNumber>36</FileNumber>
+      <FileNumber>37</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\..\..\components\finsh\shell.c</PathWithFileName>
-      <FilenameWithoutPath>shell.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\..\..\components\finsh\msh_parse.c</PathWithFileName>
+      <FilenameWithoutPath>msh_parse.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
       <GroupNumber>5</GroupNumber>
-      <FileNumber>37</FileNumber>
+      <FileNumber>38</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\..\..\components\finsh\msh_parse.c</PathWithFileName>
-      <FilenameWithoutPath>msh_parse.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\..\..\components\finsh\shell.c</PathWithFileName>
+      <FilenameWithoutPath>shell.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
       <GroupNumber>5</GroupNumber>
-      <FileNumber>38</FileNumber>
+      <FileNumber>39</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -685,7 +697,7 @@
     <RteFlg>0</RteFlg>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>39</FileNumber>
+      <FileNumber>40</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -697,7 +709,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>40</FileNumber>
+      <FileNumber>41</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -709,7 +721,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>41</FileNumber>
+      <FileNumber>42</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -721,7 +733,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>42</FileNumber>
+      <FileNumber>43</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -733,7 +745,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>43</FileNumber>
+      <FileNumber>44</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -745,7 +757,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>44</FileNumber>
+      <FileNumber>45</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -757,7 +769,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>45</FileNumber>
+      <FileNumber>46</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -769,7 +781,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>46</FileNumber>
+      <FileNumber>47</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -781,7 +793,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>47</FileNumber>
+      <FileNumber>48</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -793,7 +805,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>48</FileNumber>
+      <FileNumber>49</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -805,7 +817,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>49</FileNumber>
+      <FileNumber>50</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -817,7 +829,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>50</FileNumber>
+      <FileNumber>51</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -829,7 +841,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>51</FileNumber>
+      <FileNumber>52</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -841,7 +853,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>52</FileNumber>
+      <FileNumber>53</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -853,7 +865,7 @@
     </File>
     <File>
       <GroupNumber>6</GroupNumber>
-      <FileNumber>53</FileNumber>
+      <FileNumber>54</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -873,61 +885,61 @@
     <RteFlg>0</RteFlg>
     <File>
       <GroupNumber>7</GroupNumber>
-      <FileNumber>54</FileNumber>
+      <FileNumber>55</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\..\..\src\klibc\kstring.c</PathWithFileName>
-      <FilenameWithoutPath>kstring.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\..\..\src\klibc\kerrno.c</PathWithFileName>
+      <FilenameWithoutPath>kerrno.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
       <GroupNumber>7</GroupNumber>
-      <FileNumber>55</FileNumber>
+      <FileNumber>56</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\..\..\src\klibc\kerrno.c</PathWithFileName>
-      <FilenameWithoutPath>kerrno.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\..\..\src\klibc\kstdio.c</PathWithFileName>
+      <FilenameWithoutPath>kstdio.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
       <GroupNumber>7</GroupNumber>
-      <FileNumber>56</FileNumber>
+      <FileNumber>57</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\..\..\src\klibc\rt_vsnprintf_tiny.c</PathWithFileName>
-      <FilenameWithoutPath>rt_vsnprintf_tiny.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\..\..\src\klibc\kstring.c</PathWithFileName>
+      <FilenameWithoutPath>kstring.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
       <GroupNumber>7</GroupNumber>
-      <FileNumber>57</FileNumber>
+      <FileNumber>58</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\..\..\src\klibc\kstdio.c</PathWithFileName>
-      <FilenameWithoutPath>kstdio.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\..\..\src\klibc\rt_vsscanf.c</PathWithFileName>
+      <FilenameWithoutPath>rt_vsscanf.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
       <GroupNumber>7</GroupNumber>
-      <FileNumber>58</FileNumber>
+      <FileNumber>59</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\..\..\src\klibc\rt_vsscanf.c</PathWithFileName>
-      <FilenameWithoutPath>rt_vsscanf.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\..\..\src\klibc\rt_vsnprintf_tiny.c</PathWithFileName>
+      <FilenameWithoutPath>rt_vsnprintf_tiny.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
@@ -941,7 +953,7 @@
     <RteFlg>0</RteFlg>
     <File>
       <GroupNumber>8</GroupNumber>
-      <FileNumber>59</FileNumber>
+      <FileNumber>60</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -953,7 +965,7 @@
     </File>
     <File>
       <GroupNumber>8</GroupNumber>
-      <FileNumber>60</FileNumber>
+      <FileNumber>61</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -965,7 +977,7 @@
     </File>
     <File>
       <GroupNumber>8</GroupNumber>
-      <FileNumber>61</FileNumber>
+      <FileNumber>62</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -977,7 +989,7 @@
     </File>
     <File>
       <GroupNumber>8</GroupNumber>
-      <FileNumber>62</FileNumber>
+      <FileNumber>63</FileNumber>
       <FileType>2</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -989,7 +1001,7 @@
     </File>
     <File>
       <GroupNumber>8</GroupNumber>
-      <FileNumber>63</FileNumber>
+      <FileNumber>64</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1001,7 +1013,7 @@
     </File>
     <File>
       <GroupNumber>8</GroupNumber>
-      <FileNumber>64</FileNumber>
+      <FileNumber>65</FileNumber>
       <FileType>2</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1013,7 +1025,7 @@
     </File>
     <File>
       <GroupNumber>8</GroupNumber>
-      <FileNumber>65</FileNumber>
+      <FileNumber>66</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1033,7 +1045,7 @@
     <RteFlg>0</RteFlg>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>66</FileNumber>
+      <FileNumber>67</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1045,7 +1057,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>67</FileNumber>
+      <FileNumber>68</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1057,7 +1069,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>68</FileNumber>
+      <FileNumber>69</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1069,7 +1081,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>69</FileNumber>
+      <FileNumber>70</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1081,7 +1093,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>70</FileNumber>
+      <FileNumber>71</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1093,7 +1105,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>71</FileNumber>
+      <FileNumber>72</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1105,7 +1117,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>72</FileNumber>
+      <FileNumber>73</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1117,7 +1129,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>73</FileNumber>
+      <FileNumber>74</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1129,7 +1141,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>74</FileNumber>
+      <FileNumber>75</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1141,7 +1153,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>75</FileNumber>
+      <FileNumber>76</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1153,7 +1165,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>76</FileNumber>
+      <FileNumber>77</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1165,7 +1177,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>77</FileNumber>
+      <FileNumber>78</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1177,7 +1189,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>78</FileNumber>
+      <FileNumber>79</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1189,7 +1201,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>79</FileNumber>
+      <FileNumber>80</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1201,7 +1213,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>80</FileNumber>
+      <FileNumber>81</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1213,7 +1225,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>81</FileNumber>
+      <FileNumber>82</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1225,7 +1237,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>82</FileNumber>
+      <FileNumber>83</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1237,7 +1249,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>83</FileNumber>
+      <FileNumber>84</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1249,7 +1261,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>84</FileNumber>
+      <FileNumber>85</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1261,7 +1273,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>85</FileNumber>
+      <FileNumber>86</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1273,7 +1285,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>86</FileNumber>
+      <FileNumber>87</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1285,7 +1297,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>87</FileNumber>
+      <FileNumber>88</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1297,7 +1309,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>88</FileNumber>
+      <FileNumber>89</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1309,7 +1321,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>89</FileNumber>
+      <FileNumber>90</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1321,7 +1333,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>90</FileNumber>
+      <FileNumber>91</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1333,7 +1345,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>91</FileNumber>
+      <FileNumber>92</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1345,7 +1357,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>92</FileNumber>
+      <FileNumber>93</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1357,7 +1369,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>93</FileNumber>
+      <FileNumber>94</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1369,7 +1381,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>94</FileNumber>
+      <FileNumber>95</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1381,7 +1393,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>95</FileNumber>
+      <FileNumber>96</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1393,7 +1405,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>96</FileNumber>
+      <FileNumber>97</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1405,7 +1417,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>97</FileNumber>
+      <FileNumber>98</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1417,7 +1429,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>98</FileNumber>
+      <FileNumber>99</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1429,7 +1441,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>99</FileNumber>
+      <FileNumber>100</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1441,7 +1453,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>100</FileNumber>
+      <FileNumber>101</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
@@ -1453,7 +1465,7 @@
     </File>
     <File>
       <GroupNumber>9</GroupNumber>
-      <FileNumber>101</FileNumber>
+      <FileNumber>102</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>

bsp/nxp/mcx/mcxa/frdm-mcxa346/project.uvprojx

@@ -338,9 +338,9 @@
             <v6Rtti>0</v6Rtti>
             <VariousControls>
               <MiscControls>--target=arm-arm-none-eabi</MiscControls>
-              <Define>CPU_MCXA346VLQ, __STDC_LIMIT_MACROS, DEBUG, RT_USING_LIBC, __RTTHREAD__, RT_USING_ARMLIBC, __CLK_TCK=RT_TICK_PER_SECOND</Define>
+              <Define>__RTTHREAD__, CPU_MCXA346VLQ, RT_USING_ARMLIBC, DEBUG, __STDC_LIMIT_MACROS, RT_USING_LIBC, __CLK_TCK=RT_TICK_PER_SECOND</Define>
               <Undefine></Undefine>
-              <IncludePath>packages\nxp-mcx-series-latest\MCXA346;..\..\..\..\..\components\libc\compilers\common\extension\fcntl\octal;packages\nxp-mcx-series-latest\MCXA346\periph2;..\..\..\..\..\components\drivers\include;..\..\..\..\..\components\drivers\include;..\..\..\..\..\libcpu\arm\common;..\..\..\..\..\components\libc\compilers\common\extension;applications;board\MCUX_Config\board;..\..\..\..\..\components\drivers\include;.;..\..\..\..\..\components\drivers\phy;..\..\..\..\..\components\libc\posix\io\epoll;packages\nxp-mcx-series-latest\MCXA346\drivers;packages\nxp-mcx-cmsis-latest\Core\Include;..\..\..\..\..\libcpu\arm\cortex-m33;..\..\..\..\..\components\libc\posix\io\poll;..\..\..\..\..\components\drivers\include;..\..\..\..\..\components\drivers\include;..\..\..\..\..\include;..\..\..\..\..\components\drivers\include;..\..\..\..\..\components\drivers\include;..\..\..\..\..\components\libc\posix\ipc;..\..\..\..\..\components\drivers\include;..\..\..\..\..\components\libc\posix\io\eventfd;..\..\..\..\..\components\finsh;packages\nxp-mcx-series-latest\MCXA346\components\codec;..\..\..\..\..\components\drivers\include;..\Libraries\drivers;..\..\..\..\..\components\libc\compilers\common\include;..\..\..\..\..\components\drivers\spi;..\Libraries\drivers\config;..\..\..\..\..\components\drivers\smp_call;board;..\..\..\..\..\components\drivers\include</IncludePath>
+              <IncludePath>..\..\..\..\..\components\drivers\include;applications;..\..\..\..\..\components\drivers\include;..\..\..\..\..\components\libc\posix\io\poll;..\..\..\..\..\components\libc\compilers\common\extension;..\..\..\..\..\components\drivers\include;..\..\..\..\..\components\drivers\smp_call;..\Libraries\drivers\config;..\..\..\..\..\components\drivers\spi;..\..\..\..\..\components\drivers\include;.;..\..\..\..\..\libcpu\arm\common;packages\nxp-mcx-cmsis-latest\Core\Include;packages\nxp-mcx-series-latest\MCXA346\drivers;..\..\..\..\..\components\drivers\include;..\..\..\..\..\components\drivers\include;..\..\..\..\..\components\libc\posix\io\eventfd;..\..\..\..\..\components\drivers\include;packages\nxp-mcx-series-latest\MCXA346\periph2;..\..\..\..\..\libcpu\arm\cortex-m33;..\..\..\..\..\components\libc\posix\ipc;..\..\..\..\..\components\finsh;packages\nxp-mcx-series-latest\MCXA346;..\..\..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\Libraries\drivers;..\..\..\..\..\components\drivers\include;..\..\..\..\..\include;..\..\..\..\..\components\libc\posix\io\epoll;board\MCUX_Config\board;..\..\..\..\..\components\drivers\include;packages\nxp-mcx-series-latest\MCXA346\components\codec;..\..\..\..\..\components\drivers\include;..\..\..\..\..\components\libc\compilers\common\include;board;..\..\..\..\..\components\drivers\phy</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -384,6 +384,11 @@
         <Group>
           <GroupName>Applications</GroupName>
           <Files>
+            <File>
+              <FileName>drv_spi_sample_rw007.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>applications\drv_spi_sample_rw007.c</FilePath>
+            </File>
             <File>
               <FileName>main.c</FileName>
               <FileType>1</FileType>
@@ -1600,14 +1605,14 @@
               <FilePath>..\..\..\..\..\components\finsh\cmd.c</FilePath>
             </File>
             <File>
-              <FileName>shell.c</FileName>
+              <FileName>msh_parse.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\..\..\components\finsh\shell.c</FilePath>
+              <FilePath>..\..\..\..\..\components\finsh\msh_parse.c</FilePath>
             </File>
             <File>
-              <FileName>msh_parse.c</FileName>
+              <FileName>shell.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\..\..\components\finsh\msh_parse.c</FilePath>
+              <FilePath>..\..\..\..\..\components\finsh\shell.c</FilePath>
             </File>
             <File>
               <FileName>msh.c</FileName>
@@ -2464,31 +2469,31 @@
         <Group>
           <GroupName>klibc</GroupName>
           <Files>
-            <File>
-              <FileName>kstring.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\..\..\..\src\klibc\kstring.c</FilePath>
-            </File>
             <File>
               <FileName>kerrno.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\..\..\src\klibc\kerrno.c</FilePath>
             </File>
             <File>
-              <FileName>rt_vsnprintf_tiny.c</FileName>
+              <FileName>kstdio.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\..\..\src\klibc\rt_vsnprintf_tiny.c</FilePath>
+              <FilePath>..\..\..\..\..\src\klibc\kstdio.c</FilePath>
             </File>
             <File>
-              <FileName>kstdio.c</FileName>
+              <FileName>kstring.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\..\..\src\klibc\kstdio.c</FilePath>
+              <FilePath>..\..\..\..\..\src\klibc\kstring.c</FilePath>
             </File>
             <File>
               <FileName>rt_vsscanf.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\..\..\src\klibc\rt_vsscanf.c</FilePath>
             </File>
+            <File>
+              <FileName>rt_vsnprintf_tiny.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\..\src\klibc\rt_vsnprintf_tiny.c</FilePath>
+            </File>
           </Files>
         </Group>
         <Group>