arm_q15_to_q31.c 4.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182
  1. /* ----------------------------------------------------------------------
  2. * Project: CMSIS DSP Library
  3. * Title: arm_q15_to_q31.c
  4. * Description: Converts the elements of the Q15 vector to Q31 vector
  5. *
  6. * $Date: 18. March 2019
  7. * $Revision: V1.6.0
  8. *
  9. * Target Processor: Cortex-M cores
  10. * -------------------------------------------------------------------- */
  11. /*
  12. * Copyright (C) 2010-2019 ARM Limited or its affiliates. All rights reserved.
  13. *
  14. * SPDX-License-Identifier: Apache-2.0
  15. *
  16. * Licensed under the Apache License, Version 2.0 (the License); you may
  17. * not use this file except in compliance with the License.
  18. * You may obtain a copy of the License at
  19. *
  20. * www.apache.org/licenses/LICENSE-2.0
  21. *
  22. * Unless required by applicable law or agreed to in writing, software
  23. * distributed under the License is distributed on an AS IS BASIS, WITHOUT
  24. * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  25. * See the License for the specific language governing permissions and
  26. * limitations under the License.
  27. */
  28. #include "arm_math.h"
  29. /**
  30. @ingroup groupSupport
  31. */
  32. /**
  33. @addtogroup q15_to_x
  34. @{
  35. */
  36. /**
  37. @brief Converts the elements of the Q15 vector to Q31 vector.
  38. @param[in] pSrc points to the Q15 input vector
  39. @param[out] pDst points to the Q31 output vector
  40. @param[in] blockSize number of samples in each vector
  41. @return none
  42. @par Details
  43. The equation used for the conversion process is:
  44. <pre>
  45. pDst[n] = (q31_t) pSrc[n] << 16; 0 <= n < blockSize.
  46. </pre>
  47. */
  48. #if defined(ARM_MATH_MVEI)
  49. void arm_q15_to_q31(
  50. const q15_t * pSrc,
  51. q31_t * pDst,
  52. uint32_t blockSize)
  53. {
  54. uint32_t blkCnt;
  55. q31x4_t vecDst;
  56. blkCnt = blockSize>> 2;
  57. while (blkCnt > 0U)
  58. {
  59. /* C = (q31_t)A << 16 */
  60. /* convert from q15 to q31 and then store the results in the destination buffer */
  61. /* load q15 + 32-bit widening */
  62. vecDst = vldrhq_s32((q15_t const *) pSrc);
  63. vecDst = vshlq_n(vecDst, 16);
  64. vstrwq_s32(pDst, vecDst);
  65. /*
  66. * Decrement the blockSize loop counter
  67. * Advance vector source and destination pointers
  68. */
  69. pDst += 4;
  70. pSrc += 4;
  71. blkCnt --;
  72. }
  73. blkCnt = blockSize & 3;
  74. while (blkCnt > 0U)
  75. {
  76. /* C = (q31_t) A << 16 */
  77. /* Convert from q15 to q31 and store result in destination buffer */
  78. *pDst++ = (q31_t) *pSrc++ << 16;
  79. /* Decrement loop counter */
  80. blkCnt--;
  81. }
  82. }
  83. #else
  84. void arm_q15_to_q31(
  85. const q15_t * pSrc,
  86. q31_t * pDst,
  87. uint32_t blockSize)
  88. {
  89. uint32_t blkCnt; /* Loop counter */
  90. const q15_t *pIn = pSrc; /* Source pointer */
  91. #if defined (ARM_MATH_LOOPUNROLL)
  92. q31_t in1, in2;
  93. q31_t out1, out2, out3, out4;
  94. #endif
  95. #if defined (ARM_MATH_LOOPUNROLL)
  96. /* Loop unrolling: Compute 4 outputs at a time */
  97. blkCnt = blockSize >> 2U;
  98. while (blkCnt > 0U)
  99. {
  100. /* C = (q31_t)A << 16 */
  101. /* Convert from q15 to q31 and store result in destination buffer */
  102. in1 = read_q15x2_ia ((q15_t **) &pIn);
  103. in2 = read_q15x2_ia ((q15_t **) &pIn);
  104. #ifndef ARM_MATH_BIG_ENDIAN
  105. /* extract lower 16 bits to 32 bit result */
  106. out1 = in1 << 16U;
  107. /* extract upper 16 bits to 32 bit result */
  108. out2 = in1 & 0xFFFF0000;
  109. /* extract lower 16 bits to 32 bit result */
  110. out3 = in2 << 16U;
  111. /* extract upper 16 bits to 32 bit result */
  112. out4 = in2 & 0xFFFF0000;
  113. #else
  114. /* extract upper 16 bits to 32 bit result */
  115. out1 = in1 & 0xFFFF0000;
  116. /* extract lower 16 bits to 32 bit result */
  117. out2 = in1 << 16U;
  118. /* extract upper 16 bits to 32 bit result */
  119. out3 = in2 & 0xFFFF0000;
  120. /* extract lower 16 bits to 32 bit result */
  121. out4 = in2 << 16U;
  122. #endif /* #ifndef ARM_MATH_BIG_ENDIAN */
  123. *pDst++ = out1;
  124. *pDst++ = out2;
  125. *pDst++ = out3;
  126. *pDst++ = out4;
  127. /* Decrement loop counter */
  128. blkCnt--;
  129. }
  130. /* Loop unrolling: Compute remaining outputs */
  131. blkCnt = blockSize % 0x4U;
  132. #else
  133. /* Initialize blkCnt with number of samples */
  134. blkCnt = blockSize;
  135. #endif /* #if defined (ARM_MATH_LOOPUNROLL) */
  136. while (blkCnt > 0U)
  137. {
  138. /* C = (q31_t) A << 16 */
  139. /* Convert from q15 to q31 and store result in destination buffer */
  140. *pDst++ = (q31_t) *pIn++ << 16;
  141. /* Decrement loop counter */
  142. blkCnt--;
  143. }
  144. }
  145. #endif /* defined(ARM_MATH_MVEI) */
  146. /**
  147. @} end of q15_to_x group
  148. */