/*********************************************************************
*                    SEGGER Microcontroller GmbH                     *
*       Solutions for real time microcontroller applications         *
**********************************************************************
*                                                                    *
*            (c) 1995 - 2018 SEGGER Microcontroller GmbH             *
*                                                                    *
*       www.segger.com     Support: support@segger.com               *
*                                                                    *
**********************************************************************
----------------------------------------------------------------------
Purpose : J-Link script file for Broadcom BCM53014 device.
            - Handles connect pre-configuration
---------------------------END-OF-HEADER------------------------------
*/

/*********************************************************************
*
*       Public code, functions which are called by the DLL
*
**********************************************************************
*/

/*********************************************************************
*
*       InitTarget
*/
void InitTarget(void) {
  int v;
  //
  // The broadcom BCM53014 has an incorrect CoreSight ROMTable in it,
  // so auto-detection of CoreSight components (inclusive base address of core debug registers) is not possible
  // and needs to be pre-configured via a J-Link script
  // More info about how to specify J-Link script files for execution in various IDEs etc., please refer to UM08001, section "Executing J-Link script files"
  //
  // The rest of the J-Link generic auto-detection can be performed (determining JTAG devices etc.). Therefore, we only need to pre-configure the CPU + base address of the debug registers
  //
  Report("J-Link script: Broadcom BCM53014 J-Link script");
  CPU=CORTEX_A9;
  CORESIGHT_CoreBaseAddr = 0x19010000;
  //
  // Manually configure which APs are present on the CoreSight device
  //
  CORESIGHT_AddAP(0, CORESIGHT_CUSTOM_AP);
  CORESIGHT_AddAP(1, CORESIGHT_APB_AP);
  CORESIGHT_IndexAPBAPToUse = 1;              // For Cortex-A/R devices, always an APB-AP needs to be present since this is the interface for accessing the debug registers. Pre-select the APB-AP for this device
}