sdk-debugger-openocd-infineon/scripts/target/arm_corelink_sse200.cfg

# SPDX-License-Identifier: GPL-2.0-or-later

#
# Configuration script for Arm CoreLink SSE-200 Subsystem based IoT SoCs.
#

global TARGET
set TARGET $_CHIPNAME

swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu

#
# SRAM on ARM CoreLink SSE-200 can be 4 banks of 8/16/32/64 KB
# We will configure work area assuming 8-KB bank size in SRAM bank 1.
# Also SRAM start addresses defaults to secure mode alias.
# These values can be overridden as per board configuration
#

global _WORKAREASIZE_CPU0
if { [info exists WORKAREASIZE_CPU0] } {
	set _WORKAREASIZE_CPU0 $WORKAREASIZE_CPU0
} else {
	set _WORKAREASIZE_CPU0 0x1000
}

global _WORKAREAADDR_CPU0
if { [info exists WORKAREAADDR_CPU0] } {
	set _WORKAREAADDR_CPU0 $WORKAREAADDR_CPU0
} else {
	set _WORKAREAADDR_CPU0 0x30008000
}

#
# Target configuration for Cortex M33 Core 0 on ARM CoreLink SSE-200
# Core 0 is the boot core and will always be configured.
#

target create ${TARGET}.CPU0 cortex_m -dap $_CHIPNAME.dap -ap-num 1 -coreid 0

${TARGET}.CPU0 configure -work-area-phys $_WORKAREAADDR_CPU0 -work-area-size $_WORKAREASIZE_CPU0 -work-area-backup 0

${TARGET}.CPU0 cortex_m reset_config sysresetreq

#
# Target configuration for Cortex M33 Core 1 on ARM CoreLink SSE-200
# Core 1 is optional and locked at boot until core 0 unlocks it.
#

if { $_ENABLE_CPU1 } {
	global _WORKAREASIZE_CPU1
	if { [info exists WORKAREASIZE_CPU1] } {
		set _WORKAREASIZE_CPU1 $WORKAREASIZE_CPU1
	} else {
		set _WORKAREASIZE_CPU1 0x1000
	}

	global _WORKAREAADDR_CPU1
	if { [info exists WORKAREAADDR_CPU1] } {
		set _WORKAREAADDR_CPU1 $WORKAREAADDR_CPU1
	} else {
		set _WORKAREAADDR_CPU1 0x30009000
	}

	target create ${TARGET}.CPU1 cortex_m -dap $_CHIPNAME.dap -ap-num 2 -coreid 1

	${TARGET}.CPU1 configure -work-area-phys $_WORKAREAADDR_CPU1 -work-area-size $_WORKAREASIZE_CPU1 -work-area-backup 0

	${TARGET}.CPU1 cortex_m reset_config vectreset
}

# Make sure the default target is the boot core
targets ${TARGET}.CPU0