CYFS cce29fdc98 update v5.2.2 пре 1 месец
..
.ci cce29fdc98 update v5.2.2 пре 1 месец
applications 9e16a40c63 更新5.1.0版本 пре 1 година
board cce29fdc98 update v5.2.2 пре 1 месец
figures c0257098b9 release rt-thread v4.0.3 пре 4 година
.config cce29fdc98 update v5.2.2 пре 1 месец
.gitignore c0257098b9 release rt-thread v4.0.3 пре 4 година
Kconfig 6009bc8633 update v5.2.0 пре 1 месец
README.md c0257098b9 release rt-thread v4.0.3 пре 4 година
README_zh.md dabdf023bd update v5.2.1 пре 1 месец
SConscript dabdf023bd update v5.2.1 пре 1 месец
SConstruct cce29fdc98 update v5.2.2 пре 1 месец
project.ewp dabdf023bd update v5.2.1 пре 1 месец
project.eww c0257098b9 release rt-thread v4.0.3 пре 4 година
project.uvoptx c0257098b9 release rt-thread v4.0.3 пре 4 година
project.uvprojx dabdf023bd update v5.2.1 пре 1 месец
rtconfig.h cce29fdc98 update v5.2.2 пре 1 месец
rtconfig.py 596468e4bc release rt-thread v4.1.1 пре 2 година
template.ewp c0257098b9 release rt-thread v4.0.3 пре 4 година
template.eww c0257098b9 release rt-thread v4.0.3 пре 4 година
template.uvoptx c0257098b9 release rt-thread v4.0.3 пре 4 година
template.uvprojx c0257098b9 release rt-thread v4.0.3 пре 4 година

README.md

STM32L010-Nucleo BSP Introduction

中文

MCU: STM32L010RB @32MHz, 128KB FLASH, 20KB RAM

KEY FEATURES

  • Ultra-low-power platform
    • 1.8 V to 3.6 V power supply
    • –40 to 85 °C temperature range
    • 0.29 µA Standby mode (2 wakeup pins)
    • 0.43 µA Stop mode (16 wakeup lines)
    • 0.86 µA Stop mode + RTC + 20-Kbyte RAM retention
    • Down to 93 µA/MHz in Run mode
    • 5 µs wakeup time (from Flash memory)
    • 41 µA 12-bit ADC conversion at 10 ksps
  • Core: Arm® 32-bit Cortex®-M0+
    • From 32 kHz to 32 MHz
    • 0.95 DMIPS/MHz
  • Reset and supply management
    • Ultra-low-power BOR (brownout reset) with 5 selectable thresholds
    • Ultra-low-power POR/PDR
  • Clock sources
    • 0 to 32 MHz external clock
    • 32 kHz oscillator for RTC with calibration
    • High-speed internal 16 MHz factory-trimmed RC (±1%)
    • Internal low-power 37 kHz RC
    • Internal multispeed low-power 65 kHz to 4.2 MHz RC
    • PLL for CPU clock
  • Pre-programmed bootloader
    • USART, I2C, SPI supported
  • Development support
    • Serial wire debug supported
  • 51 fast I/Os (45 I/Os 5-Volt tolerant)
  • Memories
    • 128-Kbyte Flash memory
    • 20-Kbyte RAM
    • 512 bytes of data EEPROM
    • 20-byte backup register
    • Sector protection against R/W operation
  • Analog peripherals

    • 12-bit ADC 1.14 Msps up to 16 channels (down to 1.8 V)
  • 7-channel DMA controller, supporting ADC, SPI, I2C, USART and timers

  • 4x peripherals communication interface

  • 1x USART (ISO7816), 1x LPUART (low power)

  • 1x SPI 16 Mbit/s

  • 1x I2C (SMBus/PMBus)

  • 8x timers: 1x 16-bit with up to 4 channels, 2x 16-bit with up to 2 channels, 1x 16-bit ultra-low-power timer, 1x SysTick, 1x RTC and 2x watchdogs (independent/window)

  • CRC calculation unit, 96-bit unique ID

  • LFQFP64 package is ECOPACK2 compliant

Read more

Documents Description
STM32_Nucleo-64_BSP_Introduction How to run RT-Thread on STM32 Nucleo-64 boards (Must-Read)
STM32L010RB ST Official Website STM32L010RB datasheet and other resources

Maintained By

xph, xupenghu@outlook.com

Translated By

Meco Man @ RT-Thread Community

jiantingman@foxmail.com

https://github.com/mysterywolf