sdk-rt-thread-source-code/bsp/renesas/ra2a1-ek/ra_cfg.txt

FSP Configuration
  Board "RA2|RA2A1|EK-RA2A1"
  R7FA2A1AB3CFM
    part_number: R7FA2A1AB3CFM
    rom_size_bytes: 262144
    ram_size_bytes: 32768
    data_flash_size_bytes: 8192
    package_style: LQFP
    package_pins: 64
    number of cores: 1
    
  R7FA2A1AB3CFM
  RA2A1
    series: 2
    
  RA2A1 Family
    Enable inline BSP IRQ functions: Disabled
    Use Low Voltage Mode: Disabled
    Main Oscillator Wait Time: 262144 cycles
    
  RA2A1 Device Options
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: Enabled
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: Independent WDT: Start Mode: IWDT is stopped after a reset
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: Independent WDT: Timeout Period: 2048 cycles
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: Independent WDT: Dedicated Clock Frequency Divisor: 128
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: Independent WDT: Window End Position:  0% (no window end position)
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: Independent WDT: Window Start Position: 100% (no window start position)
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: Independent WDT: Reset Interrupt Request Select: Reset is enabled
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: Independent WDT: Stop Control: Stop counting when in Sleep,Snooze modec, or Software Standby
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: WDT: Start Mode Select: Stop WDT after a reset (register-start mode)
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: WDT: Timeout Period: 16384 cycles
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: WDT: Clock Frequency Division Ratio: 128
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: WDT: Window End Position:  0% (no window end position)
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: WDT: Window Start Position: 100% (no window start position)
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: WDT: Reset Interrupt Request: Reset
    OFS Registers: OFS0 (Option Function Select Register 0) Settings: WDT: Stop Control: Stop counting when entering Sleep mode
    OFS Registers: OFS1 (Option Function Select Register 1) Settings: Enabled
    OFS Registers: OFS1 (Option Function Select Register 1) Settings: Voltage Detection 0 Circuit Start: Voltage monitor 0 reset is disabled after reset
    OFS Registers: OFS1 (Option Function Select Register 1) Settings: Voltage Detection 0 Level: 1.90 V
    OFS Registers: OFS1 (Option Function Select Register 1) Settings: HOCO Oscillation Enable: HOCO oscillation is disabled after reset
    OFS Registers: SECMPU (Security MPU Registers) Settings: Disabled
    OFS Registers: SECMPU (Security MPU Registers) Settings: PC 0 Enable: Disabled
    OFS Registers: SECMPU (Security MPU Registers) Settings: PC 0 Start: 0x0003FFFC
    OFS Registers: SECMPU (Security MPU Registers) Settings: PC 0 End: 0x0003FFFF
    OFS Registers: SECMPU (Security MPU Registers) Settings: PC 1 Enable: Disabled
    OFS Registers: SECMPU (Security MPU Registers) Settings: PC 1 Start: 0x0003FFFC
    OFS Registers: SECMPU (Security MPU Registers) Settings: PC 1 End: 0x0003FFFF
    OFS Registers: SECMPU (Security MPU Registers) Settings: Region 0 Enable: Disabled
    OFS Registers: SECMPU (Security MPU Registers) Settings: Region 0 Start: 0x0003FFFC
    OFS Registers: SECMPU (Security MPU Registers) Settings: Region 0 End: 0x0003FFFF
    OFS Registers: SECMPU (Security MPU Registers) Settings: Region 1 Enable: Disabled
    OFS Registers: SECMPU (Security MPU Registers) Settings: Region 1 Start: 0x20007FFC
    OFS Registers: SECMPU (Security MPU Registers) Settings: Region 1 End: 0x20007FFF
    OFS Registers: SECMPU (Security MPU Registers) Settings: Region 2 Enable: Disabled
    OFS Registers: SECMPU (Security MPU Registers) Settings: Region 2 Start: 0x400DFFFC
    OFS Registers: SECMPU (Security MPU Registers) Settings: Region 2 End: 0x400DFFFF
    OFS Registers: SECMPU (Security MPU Registers) Settings: Region 3 Enable: Disabled
    OFS Registers: SECMPU (Security MPU Registers) Settings: Region 3 Start: 0x400DFFFC
    OFS Registers: SECMPU (Security MPU Registers) Settings: Region 3 End: 0x400DFFFF
    OFS Registers: OSIS (OCD/Serial Programmer ID setting register) Settings: Disabled
    OFS Registers: OSIS (OCD/Serial Programmer ID setting register) Settings: ID Code Mode: Unlocked (Ignore ID)
    OFS Registers: OSIS (OCD/Serial Programmer ID setting register) Settings: ID Code (32 Hex Characters): FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
    
  RA2A1 event data
  RA Common
    Main stack size (bytes): 0x400
    Heap size (bytes): 0
    Bootloader Secondary XIP: Disabled
    MCU Vcc (mV): 3300
    Parameter checking: Disabled
    Assert Failures: Return FSP_ERR_ASSERTION
    Clock Registers not Reset Values during Startup: Disabled
    Main Oscillator Populated: Populated
    PFS Protect: Enabled
    C Runtime Initialization : Enabled
    Early BSP Initialization : Disabled
    Main Oscillator Clock Source: Crystal or Resonator
    Subclock Populated: Populated
    Subclock Drive (Drive capacitance availability varies by MCU): Standard/Normal mode
    Subclock Stabilization Time (ms): 1000
    
  Clocks
    XTAL 12000000Hz
    HOCO 48MHz
    Clock Src: HOCO
    ICLK Div /1
    PCLKB Div /2
    PCLKD Div /1
    FCLK Div /2
    SDADCCLK Disabled
    SDADCCLK Div /12
    CLKOUT Disabled
    CLKOUT Div /1
    
  Pin Configurations
    RA2A1-EK.pincfg -> g_bsp_pin_cfg
      ADREG 37 SDADC0_ADREG - - - - - - - - IO "Read only" - 
      AVCC0 56 ANALOG0_AVCC0 - - - - - - - - IO "Read only" - 
      AVCC1 39 ANALOG0_AVCC1 - - - - - - - - IO "Read only" - 
      AVSS0 57 ANALOG0_AVSS0 - - - - - - - - IO "Read only" - 
      AVSS1 40 ANALOG0_AVSS1 - - - - - - - - IO "Read only" - 
      P000 63 - - - - Disabled - - "AGT1: AGTIO; CTSU0: TS16; GPT4: GTIOCB; ICU0: IRQ04; IIC0: SCL; KINT0: KRM0; SCI9: RXD; SCI9: SCL; SPI1: MISO" - None - - 
      P001 62 CTSU0_TS15 - Low None "Peripheral mode" - None "CTSU0: TS15; ICU0: IRQ00; RTC0: RTCOUT; SCI9: CTS; SPI1: RSPCK" - IO - - 
      P002 61 - - - - Disabled - - "ADC0: AN07; DAC81: DA; OPAMP2: AMP+" - None - - 
      P003 60 - - - - Disabled - - "ADC0: AN06; OPAMP2: AMP-" - None - - 
      P012 55 - - - - Disabled - - "ADC0: AN08; OPAMP2: AMPO" - None - - 
      P013 54 - - - - Disabled - - "ACMPHS0: IVCMP; ACMPHS0: IVREF; ADC0: AN05; DAC80: DA; GPT6: GTIOCB; OPAMP1: AMP+" - None - - 
      P014 53 - - - - Disabled - - "ACMPHS0: IVREF; ADC0: AN04; ANALOG0: VREFL; GPT6: GTIOCA; OPAMP1: AMP-" - None - - 
      P015 52 - - - - Disabled - - "ADC0: AN03; OPAMP1: AMPO" - None - - 
      P100 48 - - - - Disabled - - "ACMPHS0: IVCMP; ADC0: AN16; CTSU0: TS23; GPT5: GTIOCB; ICU0: IRQ04; SCI9: SDA; SCI9: TXD; SDADC0: ANSDP0" - None - - 
      P101 47 - - - - Disabled - - "ACMPHS0: IVREF; ADC0: AN17; CTSU0: TS22; GPT5: GTIOCA; ICU0: IRQ05; SCI9: RXD; SCI9: SCL; SDADC0: ANSDN0" - None - - 
      P102 46 - - - - Disabled - - "ADC0: AN18; CTSU0: TS21; GPT6: GTIOCB; SCI9: CTS; SDADC0: ANSDP1; SPI1: SSL0" - None - - 
      P103 45 - - - - Disabled - - "ADC0: AN19; CTSU0: TS20; GPT6: GTIOCA; SDADC0: ANSDN1; SPI1: RSPCK" - None - - 
      P104 44 - - - - Disabled - - "ADC0: AN20; CTSU0: TS19; ICU0: IRQ06; SDADC0: ANSDP2; SPI1: MISO" - None - - 
      P105 43 - - - - Disabled - - "ADC0: AN21; CTSU0: TS18; ICU0: IRQ07; SDADC0: ANSDN2; SPI1: MOSI" - None - - 
      P106 42 - - - - Disabled - - "ADC0: AN22; SDADC0: ANSDP3" - None - - 
      P107 41 - - - - Disabled - - "ADC0: AN23; SDADC0: ANSDN3" - None - - 
      P108 33 DEBUG0_SWDIO - Low - "Peripheral mode" - None "DEBUG0: SWDIO" - IO - - 
      P109 64 - - - - Disabled - - "ACMP(0-1): VCOUT; ACMPLP0: CMPREF; ADC0: ADTRG; AGT0: AGTOA; CTSU0: TS17; GPT_POEG1: GTETRG; GPT1: GTIOCB; ICU0: IRQ03; IIC1: SCL; KINT0: KRM1; SCI0: SCK; SCI9: SDA; SCI9: TXD; SPI0: MISO" - None - - 
      P110 34 - - - - Disabled - - "ACMPLP1: CMPREF; ADC0: ADTRG; AGT0: AGTOB; CAN0: CTX; CGC0: CLKOUT; CTSU0: TSCAP; GPT_OPS0: GTOWLO; GPT2: GTIOCB; ICU0: IRQ02; IIC1: SDA; SCI0: SDA; SCI0: TXD; SCI9: RXD; SCI9: SCL; SPI0: RSPCK" - None - - 
      P111 35 - - - - Disabled - - "CTSU0: TS14; ICU0: IRQ06; IIC1: SCL; RTC0: RTCOUT; SPI0: RSPCK" - None - - 
      P112 36 - - - - Disabled - - "CGC0: CLKOUT; CTSU0: TSCAP; ICU0: IRQ07; IIC1: SDA; SPI0: SSL0" - None - - 
      P200 27 - - - - Disabled - - "ICU0: NMI" - None - - 
      P201 26 GPIO - - - "Input mode" - None "SYSTEM0: MD" - IO - - 
      P204 24 - - - - Disabled - - "CTSU0: TS09; SCI0: RXD; SCI0: SCL; SCI9: SCK; SPI1: MOSI" - None - - 
      P205 23 GPIO - Low None "Output mode (Initial Low)" CMOS - "CTSU0: TS08; GPT_OPS0: GTOVLO; GPT3: GTIOCB; ICU0: IRQ00; IIC1: SDA; SCI0: SDA; SCI0: TXD; SCI1: CTS; SPI1: MISO" - IO - - 
      P206 22 GPIO - - IRQ06 "Input mode" - None "AGT0: AGTIO; CTSU0: TS07; GPT_OPS0: GTOVUP; GPT3: GTIOCA; ICU0: IRQ06; IIC1: SCL; SCI0: CTS; SCI1: SDA; SCI1: TXD; SPI1: SSL0" - IO - - 
      P212 10 - - - - Disabled - - "AGT0: AGTIO; CGC0: EXTAL; GPT_POEG1: GTETRG; GPT0: GTIOCB; ICU0: IRQ03; SCI1: SDA; SCI1: TXD" - None - - 
      P213 9 - - - - Disabled - - "AGT1: AGTEE; CGC0: XTAL; GPT_POEG0: GTETRG; GPT0: GTIOCA; ICU0: IRQ02; SCI1: RXD; SCI1: SCL" - None - - 
      P214 7 - - - - Disabled - - "CGC0: XCOUT" - None - - 
      P215 6 - - - - Disabled - - "CGC0: XCIN" - None - - 
      P300 32 DEBUG0_SWCLK - Low - "Peripheral mode" - None "DEBUG0: SWCLK" - IO - - 
      P301 31 SCI0_RXD - Low None "Peripheral mode" CMOS None "AGT1: AGTOB; CTSU0: TS13; GPT_OPS0: GTOWUP; GPT2: GTIOCA; ICU0: IRQ05; IIC0: SDA; KINT0: KRM4; RTC0: RTCOUT; SCI0: RXD; SCI0: SCL; SCI9: CTS; SPI1: MOSI" - IO - - 
      P302 30 SCI0_TXD - Low None "Peripheral mode" CMOS None "AGT1: AGTOA; CAC0: CACREF; CTSU0: TS12; GPT_OPS0: GTOVLO; GPT3: GTIOCB; ICU0: IRQ04; KINT0: KRM5; SCI0: SDA; SCI0: TXD; SCI1: RXD; SCI1: SCL; SPI1: RSPCK" - IO - - 
      P303 29 - - - - Disabled - - "CAN0: CRX; CTSU0: TS11; GPT6: GTIOCB; KINT0: KRM6; SCI0: CTS; SCI1: SCK; SPI0: MOSI" - None - - 
      P304 28 - - - - Disabled - - "CAN0: CTX; CTSU0: TS10; GPT6: GTIOCA; KINT0: KRM7; SCI0: SCK; SCI9: SDA; SCI9: TXD; SPI0: MISO" - None - - 
      P400 1 - - - - Disabled - - "ACMPLP0: CMPIN; AGT0: AGTEE; CTSU0: TS00; GPT_POEG0: GTETRG; GPT1: GTIOCA; ICU0: IRQ00; IIC1: SDA; KINT0: KRM2; RTC0: RTCOUT; SCI0: CTS; SCI1: RXD; SCI1: SCL; SPI0: MOSI" - None - - 
      P401 2 - - - - Disabled - - "ACMP(0-1): VCOUT; AGT1: AGTEE; CTSU0: TS01; GPT_OPS0: GTIU; GPT4: GTIOCA; ICU0: IRQ05; IIC0: SDA; KINT0: KRM3; SCI0: SCK; SCI9: SCK; SPI1: SSL1" - None - - 
      P402 3 - - - - Disabled - - "CTSU0: TS02; GPT_OPS0: GTIV; GPT0: GTIOCA; SCI9: CTS; SPI1: SSL2" - None - - 
      P403 4 - - - - Disabled - - "CTSU0: TS03; GPT_OPS0: GTIW; GPT0: GTIOCB; SCI1: SCK; SPI1: SSL3" - None - - 
      P407 16 USB_FS0_VBUS - Low None "Peripheral mode" CMOS None "AGT0: AGTIO; CAC0: CACREF; CAN0: CTX; CTSU0: TSCAP; GPT_OPS0: GTOULO; GPT0: GTIOCB; ICU0: IRQ01; IIC0: SCL; SCI0: SDA; SCI0: TXD; SCI9: SDA; SCI9: TXD; SPI1: RSPCK; USB_FS0: VBUS; USB_FS0: VBUS" - IO - - 
      P408 15 - - - - Disabled - - "ACMPLP1: CMPIN; AGT0: AGTO; CAN0: CRX; CTSU0: TS06; GPT_OPS0: GTOUUP; GPT0: GTIOCA; ICU0: IRQ01; IIC0: SDA; SCI0: RXD; SCI0: SCL; SCI1: SDA; SCI1: TXD; SPI0: SSL0" - None - - 
      P409 14 CTSU0_TSCAP - Low None "Peripheral mode" CMOS None "AGT1: AGTO; CAN0: CTX; CTSU0: TSCAP; GPT0: GTIOCA; ICU0: IRQ07; IIC0: SCL; SCI0: SCK; SCI1: CTS; SPI0: SSL1" - IO - - 
      P410 13 SCI1_TXD - Low - "Peripheral mode" CMOS None "CTSU0: TS05; GPT5: GTIOCB; SCI0: CTS; SCI1: SDA; SCI1: TXD; SPI0: SSL2" - IO - - 
      P411 12 SCI1_RXD - Low - "Peripheral mode" CMOS None "CTSU0: TS04; GPT5: GTIOCA; SCI0: SDA; SCI0: TXD; SCI1: RXD; SCI1: SCL; SPI0: SSL3" - IO - - 
      P500 49 DAC0_DA - - - Disabled - - "ACMPHS0: IVCMP; ADC0: AN00; CTSU0: TS24; DAC0: DA; GPT5: GTIOCA; ICU0: IRQ03; OPAMP0: AMP+; SCI0: RXD; SCI0: SCL" - IO - - 
      P501 50 - - - - Disabled - - "ACMPHS0: IVREF; ADC0: AN01; CTSU0: TS25; GPT5: GTIOCB; ICU0: IRQ02; OPAMP0: AMP-; SCI0: SDA; SCI0: TXD" - None - - 
      P502 51 - - - - Disabled - - "ADC0: AN02; ICU0: IRQ01; OPAMP0: AMPO; SCI0: CTS" - None - - 
      P914 19 USB_FS0_DP - - - "Peripheral mode" - - "USB_FS0: DP" - IO - - 
      P915 18 USB_FS0_DM - - - "Peripheral mode" - - "USB_FS0: DM" - IO - - 
      RES# 25 SYSTEM0_RES - - - - - - - - IO "Read only" - 
      SBIAS/VREFI 38 "SDADC0_VREFI / SDADC0_SBIAS" - - - - - - - - IO "Read only" - 
      VCC 11 SYSTEM0_VCC - - - - - - - - IO "Read only" - 
      VCCUSB 20 USB_FS0_VCC - - - - - - - - IO "Read only" - 
      VCCUSBLDO 21 USB_FS0_VCCLDO - - - - - - - - IO "Read only" - 
      VCL 5 SYSTEM0_VCL - - - - - - - - IO "Read only" - 
      VREFH - ANALOG0_VREFH - - - - - - - - - - - 
      VREFH0 59 ANALOG0_VREFH0 - - - - - - - - IO "Read only" - 
      VREFL0 58 ANALOG0_VREFL0 - - - - - - - - IO "Read only" - 
      VSS 8 SYSTEM0_VSS - - - - - - - - IO "Read only" - 
      VSSUSB 17 USB_FS0_VSS - - - - - - - - IO "Read only" - 
    R7FA2A1AB3CFM.pincfg -> 
      ADREG 37 SDADC0_ADREG - - - - - - - - IO "Read only" - 
      AVCC0 56 ANALOG0_AVCC0 - - - - - - - - IO "Read only" - 
      AVCC1 39 ANALOG0_AVCC1 - - - - - - - - IO "Read only" - 
      AVSS0 57 ANALOG0_AVSS0 - - - - - - - - IO "Read only" - 
      AVSS1 40 ANALOG0_AVSS1 - - - - - - - - IO "Read only" - 
      P000 63 - - - - Disabled - - "AGT1: AGTIO; CTSU0: TS16; GPT4: GTIOCB; ICU0: IRQ04; IIC0: SCL; KINT0: KRM0; SCI9: RXD; SCI9: SCL; SPI1: MISO" - None - - 
      P001 62 - - Low None Disabled - None "CTSU0: TS15; ICU0: IRQ00; RTC0: RTCOUT; SCI9: CTS; SPI1: RSPCK" - IO - - 
      P002 61 - - - - Disabled - - "ADC0: AN07; DAC81: DA; OPAMP2: AMP+" - None - - 
      P003 60 - - - - Disabled - - "ADC0: AN06; OPAMP2: AMP-" - None - - 
      P012 55 - - - - Disabled - - "ADC0: AN08; OPAMP2: AMPO" - None - - 
      P013 54 - - - - Disabled - - "ACMPHS0: IVCMP; ACMPHS0: IVREF; ADC0: AN05; DAC80: DA; GPT6: GTIOCB; OPAMP1: AMP+" - None - - 
      P014 53 - - - - Disabled - - "ACMPHS0: IVREF; ADC0: AN04; ANALOG0: VREFL; GPT6: GTIOCA; OPAMP1: AMP-" - None - - 
      P015 52 - - - - Disabled - - "ADC0: AN03; OPAMP1: AMPO" - None - - 
      P100 48 - - - - Disabled - - "ACMPHS0: IVCMP; ADC0: AN16; CTSU0: TS23; GPT5: GTIOCB; ICU0: IRQ04; SCI9: SDA; SCI9: TXD; SDADC0: ANSDP0" - None - - 
      P101 47 - - - - Disabled - - "ACMPHS0: IVREF; ADC0: AN17; CTSU0: TS22; GPT5: GTIOCA; ICU0: IRQ05; SCI9: RXD; SCI9: SCL; SDADC0: ANSDN0" - None - - 
      P102 46 - - - - Disabled - - "ADC0: AN18; CTSU0: TS21; GPT6: GTIOCB; SCI9: CTS; SDADC0: ANSDP1; SPI1: SSL0" - None - - 
      P103 45 - - - - Disabled - - "ADC0: AN19; CTSU0: TS20; GPT6: GTIOCA; SDADC0: ANSDN1; SPI1: RSPCK" - None - - 
      P104 44 - - - - Disabled - - "ADC0: AN20; CTSU0: TS19; ICU0: IRQ06; SDADC0: ANSDP2; SPI1: MISO" - None - - 
      P105 43 - - - - Disabled - - "ADC0: AN21; CTSU0: TS18; ICU0: IRQ07; SDADC0: ANSDN2; SPI1: MOSI" - None - - 
      P106 42 - - - - Disabled - - "ADC0: AN22; SDADC0: ANSDP3" - None - - 
      P107 41 - - - - Disabled - - "ADC0: AN23; SDADC0: ANSDN3" - None - - 
      P108 33 DEBUG0_SWDIO - Low - "Peripheral mode" - None "DEBUG0: SWDIO" - IO - - 
      P109 64 - - - - Disabled - - "ACMP(0-1): VCOUT; ACMPLP0: CMPREF; ADC0: ADTRG; AGT0: AGTOA; CTSU0: TS17; GPT_POEG1: GTETRG; GPT1: GTIOCB; ICU0: IRQ03; IIC1: SCL; KINT0: KRM1; SCI0: SCK; SCI9: SDA; SCI9: TXD; SPI0: MISO" - None - - 
      P110 34 - - - - Disabled - - "ACMPLP1: CMPREF; ADC0: ADTRG; AGT0: AGTOB; CAN0: CTX; CGC0: CLKOUT; CTSU0: TSCAP; GPT_OPS0: GTOWLO; GPT2: GTIOCB; ICU0: IRQ02; IIC1: SDA; SCI0: SDA; SCI0: TXD; SCI9: RXD; SCI9: SCL; SPI0: RSPCK" - None - - 
      P111 35 - - - - Disabled - - "CTSU0: TS14; ICU0: IRQ06; IIC1: SCL; RTC0: RTCOUT; SPI0: RSPCK" - None - - 
      P112 36 - - - - Disabled - - "CGC0: CLKOUT; CTSU0: TSCAP; ICU0: IRQ07; IIC1: SDA; SPI0: SSL0" - None - - 
      P200 27 - - - - Disabled - - "ICU0: NMI" - None - - 
      P201 26 - - - - Disabled - None "SYSTEM0: MD" - IO - - 
      P204 24 - - - - Disabled - - "CTSU0: TS09; SCI0: RXD; SCI0: SCL; SCI9: SCK; SPI1: MOSI" - None - - 
      P205 23 - - Low None Disabled CMOS - "CTSU0: TS08; GPT_OPS0: GTOVLO; GPT3: GTIOCB; ICU0: IRQ00; IIC1: SDA; SCI0: SDA; SCI0: TXD; SCI1: CTS; SPI1: MISO" - IO - - 
      P206 22 - - - None Disabled - None "AGT0: AGTIO; CTSU0: TS07; GPT_OPS0: GTOVUP; GPT3: GTIOCA; ICU0: IRQ06; IIC1: SCL; SCI0: CTS; SCI1: SDA; SCI1: TXD; SPI1: SSL0" - IO - - 
      P212 10 - - - - Disabled - - "AGT0: AGTIO; CGC0: EXTAL; GPT_POEG1: GTETRG; GPT0: GTIOCB; ICU0: IRQ03; SCI1: SDA; SCI1: TXD" - None - - 
      P213 9 - - - - Disabled - - "AGT1: AGTEE; CGC0: XTAL; GPT_POEG0: GTETRG; GPT0: GTIOCA; ICU0: IRQ02; SCI1: RXD; SCI1: SCL" - None - - 
      P214 7 - - - - Disabled - - "CGC0: XCOUT" - None - - 
      P215 6 - - - - Disabled - - "CGC0: XCIN" - None - - 
      P300 32 DEBUG0_SWCLK - Low - "Peripheral mode" - None "DEBUG0: SWCLK" - IO - - 
      P301 31 - - Low None Disabled CMOS None "AGT1: AGTOB; CTSU0: TS13; GPT_OPS0: GTOWUP; GPT2: GTIOCA; ICU0: IRQ05; IIC0: SDA; KINT0: KRM4; RTC0: RTCOUT; SCI0: RXD; SCI0: SCL; SCI9: CTS; SPI1: MOSI" - IO - - 
      P302 30 - - Low None Disabled CMOS None "AGT1: AGTOA; CAC0: CACREF; CTSU0: TS12; GPT_OPS0: GTOVLO; GPT3: GTIOCB; ICU0: IRQ04; KINT0: KRM5; SCI0: SDA; SCI0: TXD; SCI1: RXD; SCI1: SCL; SPI1: RSPCK" - IO - - 
      P303 29 - - - - Disabled - - "CAN0: CRX; CTSU0: TS11; GPT6: GTIOCB; KINT0: KRM6; SCI0: CTS; SCI1: SCK; SPI0: MOSI" - None - - 
      P304 28 - - - - Disabled - - "CAN0: CTX; CTSU0: TS10; GPT6: GTIOCA; KINT0: KRM7; SCI0: SCK; SCI9: SDA; SCI9: TXD; SPI0: MISO" - None - - 
      P400 1 - - - - Disabled - - "ACMPLP0: CMPIN; AGT0: AGTEE; CTSU0: TS00; GPT_POEG0: GTETRG; GPT1: GTIOCA; ICU0: IRQ00; IIC1: SDA; KINT0: KRM2; RTC0: RTCOUT; SCI0: CTS; SCI1: RXD; SCI1: SCL; SPI0: MOSI" - None - - 
      P401 2 - - - - Disabled - - "ACMP(0-1): VCOUT; AGT1: AGTEE; CTSU0: TS01; GPT_OPS0: GTIU; GPT4: GTIOCA; ICU0: IRQ05; IIC0: SDA; KINT0: KRM3; SCI0: SCK; SCI9: SCK; SPI1: SSL1" - None - - 
      P402 3 - - - - Disabled - - "CTSU0: TS02; GPT_OPS0: GTIV; GPT0: GTIOCA; SCI9: CTS; SPI1: SSL2" - None - - 
      P403 4 - - - - Disabled - - "CTSU0: TS03; GPT_OPS0: GTIW; GPT0: GTIOCB; SCI1: SCK; SPI1: SSL3" - None - - 
      P407 16 - - Low None Disabled CMOS None "AGT0: AGTIO; CAC0: CACREF; CAN0: CTX; CTSU0: TSCAP; GPT_OPS0: GTOULO; GPT0: GTIOCB; ICU0: IRQ01; IIC0: SCL; SCI0: SDA; SCI0: TXD; SCI9: SDA; SCI9: TXD; SPI1: RSPCK; USB_FS0: VBUS; USB_FS0: VBUS" - IO - - 
      P408 15 - - - - Disabled - - "ACMPLP1: CMPIN; AGT0: AGTO; CAN0: CRX; CTSU0: TS06; GPT_OPS0: GTOUUP; GPT0: GTIOCA; ICU0: IRQ01; IIC0: SDA; SCI0: RXD; SCI0: SCL; SCI1: SDA; SCI1: TXD; SPI0: SSL0" - None - - 
      P409 14 - - Low None Disabled CMOS None "AGT1: AGTO; CAN0: CTX; CTSU0: TSCAP; GPT0: GTIOCA; ICU0: IRQ07; IIC0: SCL; SCI0: SCK; SCI1: CTS; SPI0: SSL1" - IO - - 
      P410 13 - - Low - Disabled CMOS None "CTSU0: TS05; GPT5: GTIOCB; SCI0: CTS; SCI1: SDA; SCI1: TXD; SPI0: SSL2" - IO - - 
      P411 12 - - Low - Disabled CMOS None "CTSU0: TS04; GPT5: GTIOCA; SCI0: SDA; SCI0: TXD; SCI1: RXD; SCI1: SCL; SPI0: SSL3" - IO - - 
      P500 49 - - - - Disabled - - "ACMPHS0: IVCMP; ADC0: AN00; CTSU0: TS24; DAC0: DA; GPT5: GTIOCA; ICU0: IRQ03; OPAMP0: AMP+; SCI0: RXD; SCI0: SCL" - IO - - 
      P501 50 - - - - Disabled - - "ACMPHS0: IVREF; ADC0: AN01; CTSU0: TS25; GPT5: GTIOCB; ICU0: IRQ02; OPAMP0: AMP-; SCI0: SDA; SCI0: TXD" - None - - 
      P502 51 - - - - Disabled - - "ADC0: AN02; ICU0: IRQ01; OPAMP0: AMPO; SCI0: CTS" - None - - 
      P914 19 - - - - Disabled - - "USB_FS0: DP" - IO - - 
      P915 18 - - - - Disabled - - "USB_FS0: DM" - IO - - 
      RES# 25 SYSTEM0_RES - - - - - - - - IO "Read only" - 
      SBIAS/VREFI 38 "SDADC0_VREFI / SDADC0_SBIAS" - - - - - - - - IO "Read only" - 
      VCC 11 SYSTEM0_VCC - - - - - - - - IO "Read only" - 
      VCCUSB 20 USB_FS0_VCC - - - - - - - - IO "Read only" - 
      VCCUSBLDO 21 USB_FS0_VCCLDO - - - - - - - - IO "Read only" - 
      VCL 5 SYSTEM0_VCL - - - - - - - - IO "Read only" - 
      VREFH - ANALOG0_VREFH - - - - - - - - - - - 
      VREFH0 59 ANALOG0_VREFH0 - - - - - - - - IO "Read only" - 
      VREFL0 58 ANALOG0_VREFL0 - - - - - - - - IO "Read only" - 
      VSS 8 SYSTEM0_VSS - - - - - - - - IO "Read only" - 
      VSSUSB 17 USB_FS0_VSS - - - - - - - - IO "Read only" - 
    
  User Events
    
  User Event Links
    
  Module "I/O Port (r_ioport)"
    Parameter Checking: Default (BSP)
    
  Module "UART (r_sci_uart)"
    Parameter Checking: Default (BSP)
    FIFO Support: Disable
    DTC Support: Disable
    Flow Control Support: Disable
    RS-485 Support: Disable
    IrDA Support: Disabled
    
  Module "DAC (r_dac)"
    Parameter Checking: Default (BSP)
    
  HAL
    Instance "g_ioport I/O Port (r_ioport)"
      Name: g_ioport
      1st Port ELC Trigger Source: Disabled
      2nd Port ELC Trigger Source: Disabled
      3rd Port ELC Trigger Source: Disabled
      4th Port ELC Trigger Source: Disabled
      Pin Configuration Name: g_bsp_pin_cfg
      
    Instance "g_uart0 UART (r_sci_uart)"
      General: Name: g_uart0
      General: Channel: 0
      General: Data Bits: 8bits
      General: Parity: None
      General: Stop Bits: 1bit
      Baud: Baud Rate: 115200
      Baud: Baud Rate Modulation: Disabled
      Baud: Max Error (%): 5
      Flow Control: CTS/RTS Selection: Hardware RTS
      Flow Control: Software RTS Port: Disabled
      Flow Control: Software RTS Pin: Disabled
      Extra: Clock Source: Internal Clock
      Extra: Start bit detection: Falling Edge
      Extra: Noise Filter: Disable
      Extra: Receive FIFO Trigger Level: Max
      Extra: IrDA: Enable: Disabled
      Extra: IrDA: RXD Polarity Switching: Normal
      Extra: IrDA: TXD Polarity Switching: Normal
      Extra: RS-485: DE Pin: Disable
      Extra: RS-485: DE Pin Polarity: Active High
      Extra: RS-485: DE Port Number: Disabled
      Extra: RS-485: DE Pin Number: Disabled
      Interrupts: Callback: user_uart0_callback
      Interrupts: Receive Interrupt Priority: Priority 2
      Interrupts: Transmit Data Empty Interrupt Priority: Priority 2
      Interrupts: Transmit End Interrupt Priority: Priority 2
      Interrupts: Error Interrupt Priority: Priority 2
      
    Instance "g_dac0 DAC (r_dac)"
      Name: g_dac0
      Channel: 0
      Synchronize with ADC: Disabled
      Data Format: Right Justified
      Output Amplifier: Not Supported
      Charge Pump (Requires MOCO active): Disabled
      Internal Output: Not Supported
      ELC Trigger Source: Disabled
      Reference Voltage: AVCC0/AVSS0