arm_q15_to_q31.c 4.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181
  1. /* ----------------------------------------------------------------------
  2. * Project: CMSIS DSP Library
  3. * Title: arm_q15_to_q31.c
  4. * Description: Converts the elements of the Q15 vector to Q31 vector
  5. *
  6. * $Date: 23 April 2021
  7. * $Revision: V1.9.0
  8. *
  9. * Target Processor: Cortex-M and Cortex-A cores
  10. * -------------------------------------------------------------------- */
  11. /*
  12. * Copyright (C) 2010-2021 ARM Limited or its affiliates. All rights reserved.
  13. *
  14. * SPDX-License-Identifier: Apache-2.0
  15. *
  16. * Licensed under the Apache License, Version 2.0 (the License); you may
  17. * not use this file except in compliance with the License.
  18. * You may obtain a copy of the License at
  19. *
  20. * www.apache.org/licenses/LICENSE-2.0
  21. *
  22. * Unless required by applicable law or agreed to in writing, software
  23. * distributed under the License is distributed on an AS IS BASIS, WITHOUT
  24. * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  25. * See the License for the specific language governing permissions and
  26. * limitations under the License.
  27. */
  28. #include "dsp/support_functions.h"
  29. /**
  30. @ingroup groupSupport
  31. */
  32. /**
  33. @addtogroup q15_to_x
  34. @{
  35. */
  36. /**
  37. @brief Converts the elements of the Q15 vector to Q31 vector.
  38. @param[in] pSrc points to the Q15 input vector
  39. @param[out] pDst points to the Q31 output vector
  40. @param[in] blockSize number of samples in each vector
  41. @par Details
  42. The equation used for the conversion process is:
  43. <pre>
  44. pDst[n] = (q31_t) pSrc[n] << 16; 0 <= n < blockSize.
  45. </pre>
  46. */
  47. #if defined(ARM_MATH_MVEI) && !defined(ARM_MATH_AUTOVECTORIZE)
  48. void arm_q15_to_q31(
  49. const q15_t * pSrc,
  50. q31_t * pDst,
  51. uint32_t blockSize)
  52. {
  53. uint32_t blkCnt;
  54. q31x4_t vecDst;
  55. blkCnt = blockSize>> 2;
  56. while (blkCnt > 0U)
  57. {
  58. /* C = (q31_t)A << 16 */
  59. /* convert from q15 to q31 and then store the results in the destination buffer */
  60. /* load q15 + 32-bit widening */
  61. vecDst = vldrhq_s32((q15_t const *) pSrc);
  62. vecDst = vshlq_n(vecDst, 16);
  63. vstrwq_s32(pDst, vecDst);
  64. /*
  65. * Decrement the blockSize loop counter
  66. * Advance vector source and destination pointers
  67. */
  68. pDst += 4;
  69. pSrc += 4;
  70. blkCnt --;
  71. }
  72. blkCnt = blockSize & 3;
  73. while (blkCnt > 0U)
  74. {
  75. /* C = (q31_t) A << 16 */
  76. /* Convert from q15 to q31 and store result in destination buffer */
  77. *pDst++ = (q31_t) *pSrc++ << 16;
  78. /* Decrement loop counter */
  79. blkCnt--;
  80. }
  81. }
  82. #else
  83. void arm_q15_to_q31(
  84. const q15_t * pSrc,
  85. q31_t * pDst,
  86. uint32_t blockSize)
  87. {
  88. uint32_t blkCnt; /* Loop counter */
  89. const q15_t *pIn = pSrc; /* Source pointer */
  90. #if defined (ARM_MATH_LOOPUNROLL)
  91. q31_t in1, in2;
  92. q31_t out1, out2, out3, out4;
  93. #endif
  94. #if defined (ARM_MATH_LOOPUNROLL)
  95. /* Loop unrolling: Compute 4 outputs at a time */
  96. blkCnt = blockSize >> 2U;
  97. while (blkCnt > 0U)
  98. {
  99. /* C = (q31_t)A << 16 */
  100. /* Convert from q15 to q31 and store result in destination buffer */
  101. in1 = read_q15x2_ia (&pIn);
  102. in2 = read_q15x2_ia (&pIn);
  103. #ifndef ARM_MATH_BIG_ENDIAN
  104. /* extract lower 16 bits to 32 bit result */
  105. out1 = in1 << 16U;
  106. /* extract upper 16 bits to 32 bit result */
  107. out2 = in1 & 0xFFFF0000;
  108. /* extract lower 16 bits to 32 bit result */
  109. out3 = in2 << 16U;
  110. /* extract upper 16 bits to 32 bit result */
  111. out4 = in2 & 0xFFFF0000;
  112. #else
  113. /* extract upper 16 bits to 32 bit result */
  114. out1 = in1 & 0xFFFF0000;
  115. /* extract lower 16 bits to 32 bit result */
  116. out2 = in1 << 16U;
  117. /* extract upper 16 bits to 32 bit result */
  118. out3 = in2 & 0xFFFF0000;
  119. /* extract lower 16 bits to 32 bit result */
  120. out4 = in2 << 16U;
  121. #endif /* #ifndef ARM_MATH_BIG_ENDIAN */
  122. *pDst++ = out1;
  123. *pDst++ = out2;
  124. *pDst++ = out3;
  125. *pDst++ = out4;
  126. /* Decrement loop counter */
  127. blkCnt--;
  128. }
  129. /* Loop unrolling: Compute remaining outputs */
  130. blkCnt = blockSize % 0x4U;
  131. #else
  132. /* Initialize blkCnt with number of samples */
  133. blkCnt = blockSize;
  134. #endif /* #if defined (ARM_MATH_LOOPUNROLL) */
  135. while (blkCnt > 0U)
  136. {
  137. /* C = (q31_t) A << 16 */
  138. /* Convert from q15 to q31 and store result in destination buffer */
  139. *pDst++ = (q31_t) *pIn++ << 16;
  140. /* Decrement loop counter */
  141. blkCnt--;
  142. }
  143. }
  144. #endif /* defined(ARM_MATH_MVEI) */
  145. /**
  146. @} end of q15_to_x group
  147. */