feat(sysview): 更新sysview到3.60 版本

SystemView_Src/Config/Global.h

@@ -1,9 +1,9 @@
 /*********************************************************************
-*                SEGGER Microcontroller GmbH & Co. KG                *
+*                    SEGGER Microcontroller GmbH                     *
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*       (c) 2015 - 2017  SEGGER Microcontroller GmbH & Co. KG        *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -17,24 +17,14 @@
 *                                                                    *
 * SEGGER strongly recommends to not make any changes                 *
 * to or modify the source code of this software in order to stay     *
-* compatible with the RTT protocol and J-Link.                       *
+* compatible with the SystemView and RTT protocol, and J-Link.       *
 *                                                                    *
 * Redistribution and use in source and binary forms, with or         *
 * without modification, are permitted provided that the following    *
-* conditions are met:                                                *
+* condition is met:                                                  *
 *                                                                    *
 * o Redistributions of source code must retain the above copyright   *
-*   notice, this list of conditions and the following disclaimer.    *
-*                                                                    *
-* o Redistributions in binary form must reproduce the above          *
-*   copyright notice, this list of conditions and the following      *
-*   disclaimer in the documentation and/or other materials provided  *
-*   with the distribution.                                           *
-*                                                                    *
-* o Neither the name of SEGGER Microcontroller GmbH & Co. KG         *
-*   nor the names of its contributors may be used to endorse or      *
-*   promote products derived from this software without specific     *
-*   prior written permission.                                        *
+*   notice, this condition and the following disclaimer.             *
 *                                                                    *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND             *
 * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,        *
@@ -52,7 +42,7 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: V2.52a                                    *
+*       SystemView version: 3.60                                    *
 *                                                                    *
 **********************************************************************
 ----------------------------------------------------------------------
@@ -62,6 +52,7 @@ Purpose : Global types
           merge the files. In order to use Segger code, the types
           U8, U16, U32, I8, I16, I32 need to be defined in Global.h;
           additional definitions do not hurt.
+Revision: $Rev: 12501 $
 ---------------------------END-OF-HEADER------------------------------
 */
 
@@ -69,13 +60,26 @@ Purpose : Global types
 #define GLOBAL_H
 
 #define U8    unsigned char
-#define U16   unsigned short
-#define U32   unsigned long
 #define I8    signed char
+#define U16   unsigned short
 #define I16   signed short
+#ifdef __x86_64__
+#define U32   unsigned
+#define I32   int
+#else
+#define U32   unsigned long
 #define I32   signed long
+#endif
 
-#ifdef _WIN32
+//
+// CC_NO_LONG_SUPPORT can be defined to compile test
+// without long support for compilers that do not
+// support C99 and its long type.
+//
+#ifdef CC_NO_LONG_SUPPORT
+  #define PTR_ADDR  U32
+#else  // Supports long type.
+#if defined(_WIN32) && !defined(__clang__) && !defined(__MINGW32__)
   //
   // Microsoft VC6 compiler related
   //
@@ -88,7 +92,7 @@ Purpose : Global types
   #else
     #define U64_C(x) x##ULL
   #endif
-#else 
+#else
   //
   // C99 compliant compiler
   //
@@ -97,6 +101,13 @@ Purpose : Global types
   #define U64_C(x) x##ULL
 #endif
 
+#if (defined(_WIN64) || defined(__LP64__))  // 64-bit symbols used by Visual Studio and GCC, maybe others as well.
+  #define PTR_ADDR  U64
+#else
+  #define PTR_ADDR  U32
+#endif
+#endif  // Supports long type.
+
 #endif                      // Avoid multiple inclusion
 
 /*************************** End of file ****************************/

SystemView_Src/Config/SEGGER_RTT_Conf.h

@@ -1,9 +1,9 @@
 /*********************************************************************
-*                SEGGER Microcontroller GmbH & Co. KG                *
+*                    SEGGER Microcontroller GmbH                     *
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*       (c) 2015 - 2017  SEGGER Microcontroller GmbH & Co. KG        *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -17,24 +17,14 @@
 *                                                                    *
 * SEGGER strongly recommends to not make any changes                 *
 * to or modify the source code of this software in order to stay     *
-* compatible with the RTT protocol and J-Link.                       *
+* compatible with the SystemView and RTT protocol, and J-Link.       *
 *                                                                    *
 * Redistribution and use in source and binary forms, with or         *
 * without modification, are permitted provided that the following    *
-* conditions are met:                                                *
+* condition is met:                                                  *
 *                                                                    *
 * o Redistributions of source code must retain the above copyright   *
-*   notice, this list of conditions and the following disclaimer.    *
-*                                                                    *
-* o Redistributions in binary form must reproduce the above          *
-*   copyright notice, this list of conditions and the following      *
-*   disclaimer in the documentation and/or other materials provided  *
-*   with the distribution.                                           *
-*                                                                    *
-* o Neither the name of SEGGER Microcontroller GmbH & Co. KG         *
-*   nor the names of its contributors may be used to endorse or      *
-*   promote products derived from this software without specific     *
-*   prior written permission.                                        *
+*   notice, this condition and the following disclaimer.             *
 *                                                                    *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND             *
 * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,        *
@@ -52,7 +42,7 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: V2.52a                                    *
+*       SystemView version: 3.60                                    *
 *                                                                    *
 **********************************************************************
 ---------------------------END-OF-HEADER------------------------------
@@ -60,7 +50,7 @@ File    : SEGGER_RTT_Conf.h
 Purpose : Implementation of SEGGER real-time transfer (RTT) which
           allows real-time communication on targets which support
           debugger memory accesses while the CPU is running.
-Revision: $Rev: 7859 $
+Revision: $Rev: 24316 $
 
 */
 
@@ -103,43 +93,64 @@ Revision: $Rev: 7859 $
 #ifdef PKG_SEGGER_RTT_MODE_ENABLE_NO_BLOCK_SKIP
 	#define SEGGER_RTT_MODE_DEFAULT                   SEGGER_RTT_MODE_NO_BLOCK_SKIP
 #endif
-#ifdef PKG_SEGGER_RTT_MODE_ENABLE_NO_BLOCK_TRIM
-	#define SEGGER_RTT_MODE_DEFAULT                   SEGGER_RTT_MODE_NO_BLOCK_TRIM
 #endif
-#ifdef PKG_SEGGER_RTT_MODE_ENABLE_BLOCK_IF_FIFO_FULL																
-	#define SEGGER_RTT_MODE_DEFAULT                   SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL
+//
+// Take in and set to correct values for Cortex-A systems with CPU cache
+//
+//#define SEGGER_RTT_CPU_CACHE_LINE_SIZE            (32)          // Largest cache line size (in bytes) in the current system
+//#define SEGGER_RTT_UNCACHED_OFF                   (0xFB000000)  // Address alias where RTT CB and buffers can be accessed uncached
+//
+// Most common case:
+// Up-channel 0: RTT
+// Up-channel 1: SystemView
+//
+#ifndef   SEGGER_RTT_MAX_NUM_UP_BUFFERS
+  #define SEGGER_RTT_MAX_NUM_UP_BUFFERS             (3)     // Max. number of up-buffers (T->H) available on this target    (Default: 3)
+#endif
+//
+// Most common case:
+// Down-channel 0: RTT
+// Down-channel 1: SystemView
+//
+#ifndef   SEGGER_RTT_MAX_NUM_DOWN_BUFFERS
+  #define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS           (3)     // Max. number of down-buffers (H->T) available on this target  (Default: 3)
+#endif
+
+#ifndef   BUFFER_SIZE_UP
+  #define BUFFER_SIZE_UP                            (1024)  // Size of the buffer for terminal output of target, up to host (Default: 1k)
 #endif
 
-#ifdef PKG_SEGGER_RTT_USE_RTT_ASM
-	#define USE_RTT_ASM   1
+#ifndef   BUFFER_SIZE_DOWN
+  #define BUFFER_SIZE_DOWN                          (16)    // Size of the buffer for terminal input to target from host (Usually keyboard input) (Default: 16)
 #endif
+
+#ifndef   SEGGER_RTT_PRINTF_BUFFER_SIZE
+  #define SEGGER_RTT_PRINTF_BUFFER_SIZE             (64u)    // Size of buffer for RTT printf to bulk-send chars via RTT     (Default: 64)
 #endif
-	 
 
+#ifndef   SEGGER_RTT_MODE_DEFAULT
+  #define SEGGER_RTT_MODE_DEFAULT                   SEGGER_RTT_MODE_NO_BLOCK_SKIP // Mode for pre-initialized terminal channel (buffer 0)
+#endif
 
 /*********************************************************************
 *
 *       RTT memcpy configuration
 *
-*       memcpy() is good for large amounts of data, 
+*       memcpy() is good for large amounts of data,
 *       but the overhead is big for small amounts, which are usually stored via RTT.
 *       With SEGGER_RTT_MEMCPY_USE_BYTELOOP a simple byte loop can be used instead.
 *
 *       SEGGER_RTT_MEMCPY() can be used to replace standard memcpy() in RTT functions.
-*       This is may be required with memory access restrictions, 
+*       This is may be required with memory access restrictions,
 *       such as on Cortex-A devices with MMU.
 */
-#ifndef PKG_USING_SYSTEMVIEW
-#define SEGGER_RTT_MEMCPY_USE_BYTELOOP              0 // 0: Use memcpy/SEGGER_RTT_MEMCPY, 1: Use a simple byte-loop
-#else
-	#ifdef PKG_SEGGER_RTT_MEMCPY_USE_BYTELOOP
-		#define SEGGER_RTT_MEMCPY_USE_BYTELOOP 1
-	#endif
+#ifndef   SEGGER_RTT_MEMCPY_USE_BYTELOOP
+  #define SEGGER_RTT_MEMCPY_USE_BYTELOOP              0 // 0: Use memcpy/SEGGER_RTT_MEMCPY, 1: Use a simple byte-loop
 #endif
 //
 // Example definition of SEGGER_RTT_MEMCPY to external memcpy with GCC toolchains and Cortex-A targets
 //
-//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__))  
+//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__))
 //  #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes)      SEGGER_memcpy((pDest), (pSrc), (NumBytes))
 //#endif
 
@@ -157,67 +168,64 @@ Revision: $Rev: 7859 $
 // In case of doubt mask all interrupts: 1 << (8 - BASEPRI_PRIO_BITS) i.e. 1 << 5 when 3 bits are implemented in NVIC
 // or define SEGGER_RTT_LOCK() to completely disable interrupts.
 //
-
-#ifndef PKG_USING_SYSTEMVIEW
-#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY         (0x20)   // Interrupt priority to lock on SEGGER_RTT_LOCK on Cortex-M3/4 (Default: 0x20)
-#else
-#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY 	PKG_SEGGER_RTT_MAX_INTERRUPT_PRIORITY
+#ifndef   SEGGER_RTT_MAX_INTERRUPT_PRIORITY
+  #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY         (0x20)   // Interrupt priority to lock on SEGGER_RTT_LOCK on Cortex-M3/4 (Default: 0x20)
 #endif
+
 /*********************************************************************
 *
 *       RTT lock configuration for SEGGER Embedded Studio,
 *       Rowley CrossStudio and GCC
 */
-#if (defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)
-  #ifdef __ARM_ARCH_6M__
+#if ((defined(__SES_ARM) || defined(__SES_RISCV) || defined(__CROSSWORKS_ARM) || defined(__GNUC__) || defined(__clang__)) && !defined (__CC_ARM) && !defined(WIN32))
+  #if (defined(__ARM_ARCH_6M__) || defined(__ARM_ARCH_8M_BASE__))
     #define SEGGER_RTT_LOCK()   {                                                                   \
-                                    unsigned int LockState;                                         \
+                                    unsigned int _SEGGER_RTT__LockState;                                         \
                                   __asm volatile ("mrs   %0, primask  \n\t"                         \
-                                                  "mov   r1, $1     \n\t"                           \
+                                                  "movs  r1, #1       \n\t"                         \
                                                   "msr   primask, r1  \n\t"                         \
-                                                  : "=r" (LockState)                                \
+                                                  : "=r" (_SEGGER_RTT__LockState)                                \
                                                   :                                                 \
-                                                  : "r1"                                            \
+                                                  : "r1", "cc"                                      \
                                                   );
 
     #define SEGGER_RTT_UNLOCK()   __asm volatile ("msr   primask, %0  \n\t"                         \
                                                   :                                                 \
-                                                  : "r" (LockState)                                 \
+                                                  : "r" (_SEGGER_RTT__LockState)                                 \
                                                   :                                                 \
                                                   );                                                \
                                 }
-
-  #elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__))
+  #elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__) || defined(__ARM_ARCH_8_1M_MAIN__))
     #ifndef   SEGGER_RTT_MAX_INTERRUPT_PRIORITY
       #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY   (0x20)
     #endif
     #define SEGGER_RTT_LOCK()   {                                                                   \
-                                    unsigned int LockState;                                         \
+                                    unsigned int _SEGGER_RTT__LockState;                                         \
                                   __asm volatile ("mrs   %0, basepri  \n\t"                         \
                                                   "mov   r1, %1       \n\t"                         \
                                                   "msr   basepri, r1  \n\t"                         \
-                                                  : "=r" (LockState)                                \
+                                                  : "=r" (_SEGGER_RTT__LockState)                                \
                                                   : "i"(SEGGER_RTT_MAX_INTERRUPT_PRIORITY)          \
-                                                  : "r1"                                            \
+                                                  : "r1", "cc"                                      \
                                                   );
 
     #define SEGGER_RTT_UNLOCK()   __asm volatile ("msr   basepri, %0  \n\t"                         \
                                                   :                                                 \
-                                                  : "r" (LockState)                                 \
+                                                  : "r" (_SEGGER_RTT__LockState)                                 \
                                                   :                                                 \
                                                   );                                                \
                                 }
 
-  #elif defined(__ARM_ARCH_7A__)
+  #elif (defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7R__))
     #define SEGGER_RTT_LOCK() {                                                \
-                                 unsigned int LockState;                       \
+                                 unsigned int _SEGGER_RTT__LockState;                       \
                                  __asm volatile ("mrs r1, CPSR \n\t"           \
                                                  "mov %0, r1 \n\t"             \
                                                  "orr r1, r1, #0xC0 \n\t"      \
                                                  "msr CPSR_c, r1 \n\t"         \
-                                                 : "=r" (LockState)            \
+                                                 : "=r" (_SEGGER_RTT__LockState)            \
                                                  :                             \
-                                                 : "r1"                        \
+                                                 : "r1", "cc"                  \
                                                  );
 
     #define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t"              \
@@ -227,11 +235,30 @@ Revision: $Rev: 7859 $
                                                 "orr r1, r1, r0 \n\t"          \
                                                 "msr CPSR_c, r1 \n\t"          \
                                                 :                              \
-                                                : "r" (LockState)              \
-                                                : "r0", "r1"                   \
+                                                : "r" (_SEGGER_RTT__LockState)              \
+                                                : "r0", "r1", "cc"             \
                                                 );                             \
                             }
-#else
+  #elif defined(__riscv) || defined(__riscv_xlen)
+    #define SEGGER_RTT_LOCK()  {                                               \
+                                 unsigned int _SEGGER_RTT__LockState;                       \
+                                 __asm volatile ("csrr  %0, mstatus  \n\t"     \
+                                                 "csrci mstatus, 8   \n\t"     \
+                                                 "andi  %0, %0,  8   \n\t"     \
+                                                 : "=r" (_SEGGER_RTT__LockState)            \
+                                                 :                             \
+                                                 :                             \
+                                                );
+
+  #define SEGGER_RTT_UNLOCK()    __asm volatile ("csrr  a1, mstatus  \n\t"     \
+                                                 "or    %0, %0, a1   \n\t"     \
+                                                 "csrs  mstatus, %0  \n\t"     \
+                                                 :                             \
+                                                 : "r"  (_SEGGER_RTT__LockState)            \
+                                                 : "a1"                        \
+                                                );                             \
+                               }
+  #else
     #define SEGGER_RTT_LOCK()
     #define SEGGER_RTT_UNLOCK()
   #endif
@@ -242,25 +269,53 @@ Revision: $Rev: 7859 $
 *       RTT lock configuration for IAR EWARM
 */
 #ifdef __ICCARM__
-  #if (defined (__ARM6M__) && (__CORE__ == __ARM6M__))
+  #if (defined (__ARM6M__)          && (__CORE__ == __ARM6M__))             ||                      \
+      (defined (__ARM8M_BASELINE__) && (__CORE__ == __ARM8M_BASELINE__))
     #define SEGGER_RTT_LOCK()   {                                                                   \
-                                  unsigned int LockState;                                           \
-                                  LockState = __get_PRIMASK();                                      \
+                                  unsigned int _SEGGER_RTT__LockState;                                           \
+                                  _SEGGER_RTT__LockState = __get_PRIMASK();                                      \
                                   __set_PRIMASK(1);
 
-    #define SEGGER_RTT_UNLOCK()   __set_PRIMASK(LockState);                                         \
+    #define SEGGER_RTT_UNLOCK()   __set_PRIMASK(_SEGGER_RTT__LockState);                                         \
                                 }
-  #elif ((defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)) || (defined (__ARM7M__) && (__CORE__ == __ARM7M__)))
+  #elif (defined (__ARM7EM__)         && (__CORE__ == __ARM7EM__))          ||                      \
+        (defined (__ARM7M__)          && (__CORE__ == __ARM7M__))           ||                      \
+        (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__))  ||                      \
+        (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__))
     #ifndef   SEGGER_RTT_MAX_INTERRUPT_PRIORITY
       #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY   (0x20)
     #endif
     #define SEGGER_RTT_LOCK()   {                                                                   \
-                                  unsigned int LockState;                                           \
-                                  LockState = __get_BASEPRI();                                      \
+                                  unsigned int _SEGGER_RTT__LockState;                                           \
+                                  _SEGGER_RTT__LockState = __get_BASEPRI();                                      \
                                   __set_BASEPRI(SEGGER_RTT_MAX_INTERRUPT_PRIORITY);
 
-    #define SEGGER_RTT_UNLOCK()   __set_BASEPRI(LockState);                                         \
+    #define SEGGER_RTT_UNLOCK()   __set_BASEPRI(_SEGGER_RTT__LockState);                                         \
                                 }
+  #elif (defined (__ARM7A__) && (__CORE__ == __ARM7A__))                    ||                      \
+        (defined (__ARM7R__) && (__CORE__ == __ARM7R__))
+    #define SEGGER_RTT_LOCK() {                                                                     \
+                                 unsigned int _SEGGER_RTT__LockState;                                            \
+                                 __asm volatile ("mrs r1, CPSR \n\t"                                \
+                                                 "mov %0, r1 \n\t"                                  \
+                                                 "orr r1, r1, #0xC0 \n\t"                           \
+                                                 "msr CPSR_c, r1 \n\t"                              \
+                                                 : "=r" (_SEGGER_RTT__LockState)                                 \
+                                                 :                                                  \
+                                                 : "r1", "cc"                                       \
+                                                 );
+
+    #define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t"                                   \
+                                                "mrs r1, CPSR \n\t"                                 \
+                                                "bic r1, r1, #0xC0 \n\t"                            \
+                                                "and r0, r0, #0xC0 \n\t"                            \
+                                                "orr r1, r1, r0 \n\t"                               \
+                                                "msr CPSR_c, r1 \n\t"                               \
+                                                :                                                   \
+                                                : "r" (_SEGGER_RTT__LockState)                                   \
+                                                : "r0", "r1", "cc"                                  \
+                                                );                                                  \
+                            }
   #endif
 #endif
 
@@ -270,11 +325,11 @@ Revision: $Rev: 7859 $
 */
 #ifdef __ICCRX__
   #define SEGGER_RTT_LOCK()   {                                                                     \
-                                unsigned long LockState;                                            \
-                                LockState = __get_interrupt_state();                                \
+                                unsigned long _SEGGER_RTT__LockState;                                            \
+                                _SEGGER_RTT__LockState = __get_interrupt_state();                                \
                                 __disable_interrupt();
 
-  #define SEGGER_RTT_UNLOCK()   __set_interrupt_state(LockState);                                   \
+  #define SEGGER_RTT_UNLOCK()   __set_interrupt_state(_SEGGER_RTT__LockState);                                   \
                               }
 #endif
 
@@ -284,11 +339,11 @@ Revision: $Rev: 7859 $
 */
 #ifdef __ICCRL78__
   #define SEGGER_RTT_LOCK()   {                                                                     \
-                                __istate_t LockState;                                               \
-                                LockState = __get_interrupt_state();                                \
+                                __istate_t _SEGGER_RTT__LockState;                                               \
+                                _SEGGER_RTT__LockState = __get_interrupt_state();                                \
                                 __disable_interrupt();
 
-  #define SEGGER_RTT_UNLOCK()   __set_interrupt_state(LockState);                                   \
+  #define SEGGER_RTT_UNLOCK()   __set_interrupt_state(_SEGGER_RTT__LockState);                                   \
                               }
 #endif
 
@@ -299,13 +354,13 @@ Revision: $Rev: 7859 $
 #ifdef __CC_ARM
   #if (defined __TARGET_ARCH_6S_M)
     #define SEGGER_RTT_LOCK()   {                                                                   \
-                                  unsigned int LockState;                                           \
-                                  register unsigned char PRIMASK __asm( "primask");                 \
-                                  LockState = PRIMASK;                                              \
-                                  PRIMASK = 1u;                                                     \
+                                  unsigned int _SEGGER_RTT__LockState;                                           \
+                                  register unsigned char _SEGGER_RTT__PRIMASK __asm( "primask");                 \
+                                  _SEGGER_RTT__LockState = _SEGGER_RTT__PRIMASK;                                              \
+                                  _SEGGER_RTT__PRIMASK = 1u;                                                     \
                                   __schedule_barrier();
 
-    #define SEGGER_RTT_UNLOCK()   PRIMASK = LockState;                                              \
+    #define SEGGER_RTT_UNLOCK()   _SEGGER_RTT__PRIMASK = _SEGGER_RTT__LockState;                                              \
                                   __schedule_barrier();                                             \
                                 }
   #elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M))
@@ -313,13 +368,13 @@ Revision: $Rev: 7859 $
       #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY   (0x20)
     #endif
     #define SEGGER_RTT_LOCK()   {                                                                   \
-                                  unsigned int LockState;                                           \
+                                  unsigned int _SEGGER_RTT__LockState;                                           \
                                   register unsigned char BASEPRI __asm( "basepri");                 \
-                                  LockState = BASEPRI;                                              \
+                                  _SEGGER_RTT__LockState = BASEPRI;                                              \
                                   BASEPRI = SEGGER_RTT_MAX_INTERRUPT_PRIORITY;                      \
                                   __schedule_barrier();
 
-    #define SEGGER_RTT_UNLOCK()   BASEPRI = LockState;                                              \
+    #define SEGGER_RTT_UNLOCK()   BASEPRI = _SEGGER_RTT__LockState;                                              \
                                   __schedule_barrier();                                             \
                                 }
   #endif
@@ -332,26 +387,57 @@ Revision: $Rev: 7859 $
 #ifdef __TI_ARM__
   #if defined (__TI_ARM_V6M0__)
     #define SEGGER_RTT_LOCK()   {                                                                   \
-                                  unsigned int LockState;                                           \
-                                  LockState = __get_PRIMASK();                                      \
+                                  unsigned int _SEGGER_RTT__LockState;                                           \
+                                  _SEGGER_RTT__LockState = __get_PRIMASK();                                      \
                                   __set_PRIMASK(1);
 
-    #define SEGGER_RTT_UNLOCK()   __set_PRIMASK(LockState);                                         \
+    #define SEGGER_RTT_UNLOCK()   __set_PRIMASK(_SEGGER_RTT__LockState);                                         \
                                 }
   #elif (defined (__TI_ARM_V7M3__) || defined (__TI_ARM_V7M4__))
     #ifndef   SEGGER_RTT_MAX_INTERRUPT_PRIORITY
       #define SEGGER_RTT_MAX_INTERRUPT_PRIORITY   (0x20)
     #endif
     #define SEGGER_RTT_LOCK()   {                                                                   \
-                                  unsigned int LockState;                                           \
-                                  LockState = OS_GetBASEPRI();                                      \
-                                  OS_SetBASEPRI(SEGGER_RTT_MAX_INTERRUPT_PRIORITY);
+                                  unsigned int _SEGGER_RTT__LockState;                                           \
+                                  _SEGGER_RTT__LockState = _set_interrupt_priority(SEGGER_RTT_MAX_INTERRUPT_PRIORITY);
 
-    #define SEGGER_RTT_UNLOCK()   OS_SetBASEPRI(LockState);                                         \
+    #define SEGGER_RTT_UNLOCK()   _set_interrupt_priority(_SEGGER_RTT__LockState);                               \
                                 }
   #endif
 #endif
 
+/*********************************************************************
+*
+*       RTT lock configuration for CCRX
+*/
+#ifdef __RX
+  #include <machine.h>
+  #define SEGGER_RTT_LOCK()   {                                                                     \
+                                unsigned long _SEGGER_RTT__LockState;                                            \
+                                _SEGGER_RTT__LockState = get_psw() & 0x010000;                                   \
+                                clrpsw_i();
+
+  #define SEGGER_RTT_UNLOCK()   set_psw(get_psw() | _SEGGER_RTT__LockState);                                     \
+                              }
+#endif
+
+/*********************************************************************
+*
+*       RTT lock configuration for embOS Simulation on Windows
+*       (Can also be used for generic RTT locking with embOS)
+*/
+#if defined(WIN32) || defined(SEGGER_RTT_LOCK_EMBOS)
+
+void OS_SIM_EnterCriticalSection(void);
+void OS_SIM_LeaveCriticalSection(void);
+
+#define SEGGER_RTT_LOCK()       {                                                                   \
+                                  OS_SIM_EnterCriticalSection();
+
+#define SEGGER_RTT_UNLOCK()       OS_SIM_LeaveCriticalSection();                                    \
+                                }
+#endif
+
 /*********************************************************************
 *
 *       RTT lock configuration fallback
@@ -364,5 +450,16 @@ Revision: $Rev: 7859 $
   #define SEGGER_RTT_UNLOCK()              // Unlock RTT (nestable) (i.e. enable previous interrupt lock state)
 #endif
 
+/*********************************************************************
+*
+*       If SEGGER_RTT_SECTION is defined but SEGGER_RTT_BUFFER_SECTION
+*       is not, use the same section for SEGGER_RTT_BUFFER_SECTION.
+*/
+#ifndef SEGGER_RTT_BUFFER_SECTION
+  #if defined(SEGGER_RTT_SECTION)
+    #define SEGGER_RTT_BUFFER_SECTION SEGGER_RTT_SECTION
+  #endif
+#endif
+
 #endif
 /*************************** End of file ****************************/

SystemView_Src/Config/SEGGER_SYSVIEW_Conf.h

@@ -1,9 +1,9 @@
 /*********************************************************************
-*                SEGGER Microcontroller GmbH & Co. KG                *
+*                    SEGGER Microcontroller GmbH                     *
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*       (c) 2015 - 2017  SEGGER Microcontroller GmbH & Co. KG        *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -17,24 +17,14 @@
 *                                                                    *
 * SEGGER strongly recommends to not make any changes                 *
 * to or modify the source code of this software in order to stay     *
-* compatible with the RTT protocol and J-Link.                       *
+* compatible with the SystemView and RTT protocol, and J-Link.       *
 *                                                                    *
 * Redistribution and use in source and binary forms, with or         *
 * without modification, are permitted provided that the following    *
-* conditions are met:                                                *
+* condition is met:                                                  *
 *                                                                    *
 * o Redistributions of source code must retain the above copyright   *
-*   notice, this list of conditions and the following disclaimer.    *
-*                                                                    *
-* o Redistributions in binary form must reproduce the above          *
-*   copyright notice, this list of conditions and the following      *
-*   disclaimer in the documentation and/or other materials provided  *
-*   with the distribution.                                           *
-*                                                                    *
-* o Neither the name of SEGGER Microcontroller GmbH & Co. KG         *
-*   nor the names of its contributors may be used to endorse or      *
-*   promote products derived from this software without specific     *
-*   prior written permission.                                        *
+*   notice, this condition and the following disclaimer.             *
 *                                                                    *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND             *
 * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,        *
@@ -52,142 +42,60 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: V2.52a                                    *
+*       SystemView version: 3.60                                    *
 *                                                                    *
 **********************************************************************
 -------------------------- END-OF-HEADER -----------------------------
 
 File    : SEGGER_SYSVIEW_Conf.h
-Purpose : SEGGER SystemView configuration.
-Revision: $Rev: 6249 $
+Purpose : SEGGER SystemView configuration file.
+          Set defines which deviate from the defaults (see SEGGER_SYSVIEW_ConfDefaults.h) here.          
+Revision: $Rev: 21292 $
+
+Additional information:
+  Required defines which must be set are:
+    SEGGER_SYSVIEW_GET_TIMESTAMP
+    SEGGER_SYSVIEW_GET_INTERRUPT_ID
+  For known compilers and cores, these might be set to good defaults
+  in SEGGER_SYSVIEW_ConfDefaults.h.
+  
+  SystemView needs a (nestable) locking mechanism.
+  If not defined, the RTT locking mechanism is used,
+  which then needs to be properly configured.
 */
 
 #ifndef SEGGER_SYSVIEW_CONF_H
 #define SEGGER_SYSVIEW_CONF_H
-#include "rtthread.h"
 
 /*********************************************************************
 *
-*       Defines, fixed
+*       Defines, configurable
 *
 **********************************************************************
 */
-//
-// Constants for known core configuration
-//
-#define SEGGER_SYSVIEW_CORE_OTHER   0
-#define SEGGER_SYSVIEW_CORE_CM0     1 // Cortex-M0/M0+/M1
-#define SEGGER_SYSVIEW_CORE_CM3     2 // Cortex-M3/M4/M7/M85
-#define SEGGER_SYSVIEW_CORE_RX      3 // Renesas RX
-
-#if (defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__) || (defined __clang__)
-  #if (defined __ARM_ARCH_6M__) || (defined __ARM_ARCH_8M_BASE__)
-    #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
-  #elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__)) || (defined __ARM_ARCH_8_1M_MAIN__)
-    #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
-  #endif
-#elif defined(__ICCARM__)
-  #if (defined (__ARM6M__)          && (__CORE__ == __ARM6M__))          \
-   || (defined (__ARM8M_BASELINE__) && (__CORE__ == __ARM8M_BASELINE__))
-    #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
-  #elif (defined (__ARM7EM__)         && (__CORE__ == __ARM7EM__))         \
-     || (defined (__ARM7M__)          && (__CORE__ == __ARM7M__))          \
-     || (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) \
-     || (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__))
-    #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
-  #endif
-#elif defined(__CC_ARM)
-  #if (defined(__TARGET_ARCH_6S_M))
-    #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
-  #elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M))
-    #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
-  #endif
-#elif defined(__TI_ARM__)
-  #ifdef __TI_ARM_V6M0__
-    #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
-  #elif (defined(__TI_ARM_V7M3__) || defined(__TI_ARM_V7M4__))
-    #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
-  #endif
-#elif defined(__ICCRX__)
-  #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX
-#elif defined(__RX)
-  #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX
-#endif
-
-#ifndef   SEGGER_SYSVIEW_CORE
-  #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_OTHER
-#endif
 
 /*********************************************************************
 *
-*       Defines, configurable
+*       Define: SEGGER_SYSVIEW_SECTION
 *
-**********************************************************************
+*  Description
+*    Section to place the SystemView RTT Buffer into.
+*  Default
+*    undefined: Do not place into a specific section.
+*  Notes
+*    If SEGGER_RTT_SECTION is defined, the default changes to use
+*    this section for the SystemView RTT Buffer, too.
 */
-/*********************************************************************
-*
-*       SystemView buffer configuration
-*/
-#ifndef PKG_USING_SYSTEMVIEW
-	#define SEGGER_SYSVIEW_RTT_BUFFER_SIZE      1024                                // Number of bytes that SystemView uses for the buffer.
-	#define SEGGER_SYSVIEW_RTT_CHANNEL          1                                   // The RTT channel that SystemView will use. 0: Auto selection
-
-	#define SEGGER_SYSVIEW_USE_STATIC_BUFFER    1                                   // Use a static buffer to generate events instead of a buffer on the stack
-
-	#define SEGGER_SYSVIEW_POST_MORTEM_MODE     0                                   // 1: Enable post mortem analysis mode
-#else
-	#define SEGGER_SYSVIEW_RTT_BUFFER_SIZE      PKG_SEGGER_SYSVIEW_RTT_BUFFER_SIZE
+#if !(defined SEGGER_SYSVIEW_SECTION) && (defined SEGGER_RTT_BUFFER_SECTION)
+  #define SEGGER_SYSVIEW_SECTION                  SEGGER_RTT_BUFFER_SECTION
+#endif
 
-	#ifdef PKG_SEGGER_SYSVIEW_RTT_CHANNEL          
-		#define SEGGER_SYSVIEW_RTT_CHANNEL 1
-	#endif
 
-	#ifdef PKG_SEGGER_SYSVIEW_USE_STATIC_BUFFER          
-		#define SEGGER_SYSVIEW_USE_STATIC_BUFFER 1
-	#endif
-	
-	#ifdef PKG_SEGGER_SYSVIEW_POST_MORTEM_MODE   
-		#define SEGGER_SYSVIEW_POST_MORTEM_MODE 1
-	#endif
-#endif
 /*********************************************************************
-*
-*       SystemView timestamp configuration
+* TODO: Add your defines here.                                       *
+**********************************************************************
 */
-#if SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3
-  #define SEGGER_SYSVIEW_GET_TIMESTAMP()      (*(U32 *)(0xE0001004))            // Retrieve a system timestamp. Cortex-M cycle counter.
-  #define SEGGER_SYSVIEW_TIMESTAMP_BITS       32                                // Define number of valid bits low-order delivered by clock source
-#else
-  #define SEGGER_SYSVIEW_GET_TIMESTAMP()      SEGGER_SYSVIEW_X_GetTimestamp()   // Retrieve a system timestamp via user-defined function
-  #define SEGGER_SYSVIEW_TIMESTAMP_BITS       32                                // Define number of valid bits low-order delivered by SEGGER_SYSVIEW_X_GetTimestamp()
-#endif
 
-/*********************************************************************
-*
-*       SystemView Id configuration
-*/
-#ifndef PKG_USING_SYSTEMVIEW
-	#define SEGGER_SYSVIEW_ID_BASE         0x10000000                               // Default value for the lowest Id reported by the application. Can be overridden by the application via SEGGER_SYSVIEW_SetRAMBase(). (i.e. 0x20000000 when all Ids are an address in this RAM)
-	#define SEGGER_SYSVIEW_ID_SHIFT        2                                        // Number of bits to shift the Id to save bandwidth. (i.e. 2 when Ids are 4 byte aligned)
-#else
-	#define SEGGER_SYSVIEW_ID_BASE         PKG_SEGGER_SYSVIEW_ID_BASE
-	#define SEGGER_SYSVIEW_ID_SHIFT        PKG_SEGGER_SYSVIEW_ID_SHIFT
-#endif
-/*********************************************************************
-*
-*       SystemView interrupt configuration
-*/
-#if SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3
-  #define SEGGER_SYSVIEW_GET_INTERRUPT_ID()   ((*(U32 *)(0xE000ED04)) & 0x1FF)  // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[8:0] = active vector)
-#elif SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM0
-  #if defined(__ICCARM__)
-    #define SEGGER_SYSVIEW_GET_INTERRUPT_ID()   (__get_IPSR())                  // Workaround for IAR, which might do a byte-access to 0xE000ED04. Read IPSR instead.
-  #else
-    #define SEGGER_SYSVIEW_GET_INTERRUPT_ID()   ((*(U32 *)(0xE000ED04)) & 0x3F) // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[5:0] = active vector)
-  #endif
-#else
-  #define SEGGER_SYSVIEW_GET_INTERRUPT_ID()   SEGGER_SYSVIEW_X_GetInterruptId() // Get the currently active interrupt Id from the user-provided function.
-#endif
 
 #endif  // SEGGER_SYSVIEW_CONF_H
 

SystemView_Src/SEGGER/SEGGER.h

@@ -1,9 +1,9 @@
 /*********************************************************************
-*                SEGGER Microcontroller GmbH & Co. KG                *
+*                    SEGGER Microcontroller GmbH                     *
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*       (c) 2015 - 2017  SEGGER Microcontroller GmbH & Co. KG        *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -17,24 +17,14 @@
 *                                                                    *
 * SEGGER strongly recommends to not make any changes                 *
 * to or modify the source code of this software in order to stay     *
-* compatible with the RTT protocol and J-Link.                       *
+* compatible with the SystemView and RTT protocol, and J-Link.       *
 *                                                                    *
 * Redistribution and use in source and binary forms, with or         *
 * without modification, are permitted provided that the following    *
-* conditions are met:                                                *
+* condition is met:                                                  *
 *                                                                    *
 * o Redistributions of source code must retain the above copyright   *
-*   notice, this list of conditions and the following disclaimer.    *
-*                                                                    *
-* o Redistributions in binary form must reproduce the above          *
-*   copyright notice, this list of conditions and the following      *
-*   disclaimer in the documentation and/or other materials provided  *
-*   with the distribution.                                           *
-*                                                                    *
-* o Neither the name of SEGGER Microcontroller GmbH & Co. KG         *
-*   nor the names of its contributors may be used to endorse or      *
-*   promote products derived from this software without specific     *
-*   prior written permission.                                        *
+*   notice, this condition and the following disclaimer.             *
 *                                                                    *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND             *
 * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,        *
@@ -52,19 +42,20 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: V2.52a                                    *
+*       SystemView version: 3.60                                    *
 *                                                                    *
 **********************************************************************
 ----------------------------------------------------------------------
 File    : SEGGER.h
 Purpose : Global types etc & general purpose utility functions
+Revision: $Rev: 18102 $
 ---------------------------END-OF-HEADER------------------------------
 */
 
 #ifndef SEGGER_H            // Guard against multiple inclusion
 #define SEGGER_H
 
-#include <stdarg.h>
+#include <stdarg.h>         // For va_list.
 #include "Global.h"         // Type definitions: U8, U16, U32, I8, I16, I32
 
 #if defined(__cplusplus)
@@ -79,16 +70,21 @@ extern "C" {     /* Make sure we have C-declarations in C++ programs */
 */
 
 #ifndef INLINE
-  #ifdef _WIN32
+  #if (defined(__ICCARM__) || defined(__RX) || defined(__ICCRX__))
     //
-    // Microsoft VC6 and newer.
-    // Force inlining without cost checking.
+    // Other known compilers.
     //
-    #define INLINE  __forceinline
+    #define INLINE  inline
   #else
-    #if (defined(__GNUC__))
+    #if (defined(_WIN32) && !defined(__clang__))
+      //
+      // Microsoft VC6 and newer.
+      // Force inlining without cost checking.
+      //
+      #define INLINE  __forceinline
+    #elif defined(__GNUC__) || defined(__clang__)
       //
-      // Force inlining with GCC
+      // Force inlining with GCC + clang
       //
       #define INLINE inline __attribute__((always_inline))
     #elif (defined(__CC_ARM))
@@ -96,11 +92,6 @@ extern "C" {     /* Make sure we have C-declarations in C++ programs */
       // Force inlining with ARMCC (Keil)
       //
       #define INLINE  __inline
-    #elif (defined(__ICCARM__) || defined(__RX) || defined(__ICCRX__))
-      //
-      // Other known compilers.
-      //
-      #define INLINE  inline
     #else
       //
       // Unknown compilers.
@@ -125,6 +116,11 @@ extern "C" {     /* Make sure we have C-declarations in C++ programs */
   #define SEGGER_USE_PARA(Para) (void)Para  // This works for most compilers.
 #endif
 
+#define SEGGER_ADDR2PTR(Type, Addr)  (/*lint -e(923) -e(9078)*/((Type*)((PTR_ADDR)(Addr))))    // Allow cast from address to pointer.
+#define SEGGER_PTR2ADDR(p)           (/*lint -e(923) -e(9078)*/((PTR_ADDR)(p)))                // Allow cast from pointer to address.
+#define SEGGER_PTR2PTR(Type, p)      (/*lint -e(740) -e(826) -e(9079) -e(9087)*/((Type*)(p)))  // Allow cast from one pointer type to another (ignore different size).
+#define SEGGER_PTR_DISTANCE(p0, p1)  (SEGGER_PTR2ADDR(p0) - SEGGER_PTR2ADDR(p1))
+
 /*********************************************************************
 *
 *       Defines
@@ -153,10 +149,10 @@ typedef struct {
 } SEGGER_BUFFER_DESC;
 
 typedef struct {
-  int  CacheLineSize;                                 // 0: No Cache. Most Systems such as ARM9 use a 32 bytes cache line size.
-  void (*pfDMB)       (void);                         // Optional DMB function for Data Memory Barrier to make sure all memory operations are completed.
-  void (*pfClean)     (void *p, unsigned NumBytes);   // Optional clean function for cached memory.
-  void (*pfInvalidate)(void *p, unsigned NumBytes);   // Optional invalidate function for cached memory.
+  unsigned int CacheLineSize;                             // 0: No Cache. Most Systems such as ARM9 use a 32 bytes cache line size.
+  void (*pfDMB)       (void);                             // Optional DMB function for Data Memory Barrier to make sure all memory operations are completed.
+  void (*pfClean)     (void *p, unsigned long NumBytes);  // Optional clean function for cached memory.
+  void (*pfInvalidate)(void *p, unsigned long NumBytes);  // Optional invalidate function for cached memory.
 } SEGGER_CACHE_CONFIG;
 
 typedef struct SEGGER_SNPRINTF_CONTEXT_struct SEGGER_SNPRINTF_CONTEXT;
@@ -181,6 +177,11 @@ typedef struct SEGGER_PRINTF_FORMATTER {
   char                            Specifier;          // Format specifier.
 } SEGGER_PRINTF_FORMATTER;
 
+typedef struct {
+  U32 (*pfGetHPTimestamp)(void);          // Mandatory, pfGetHPTimestamp
+  int (*pfGetUID)        (U8 abUID[16]);  // Optional,  pfGetUID
+} SEGGER_BSP_API;
+
 /*********************************************************************
 *
 *       Utility functions
@@ -192,18 +193,19 @@ typedef struct SEGGER_PRINTF_FORMATTER {
 // Memory operations.
 //
 void SEGGER_ARM_memcpy(void* pDest, const void* pSrc, int NumBytes);
-void SEGGER_memcpy    (void* pDest, const void* pSrc, int NumBytes);
+void SEGGER_memcpy    (void* pDest, const void* pSrc, unsigned NumBytes);
 void SEGGER_memxor    (void* pDest, const void* pSrc, unsigned NumBytes);
 
 //
 // String functions.
 //
-int      SEGGER_atoi      (const char* s);
-int      SEGGER_isalnum   (int c);
-int      SEGGER_isalpha   (int c);
-unsigned SEGGER_strlen    (const char* s);
-int      SEGGER_tolower   (int c);
-int      SEGGER_strcasecmp(const char* sText1, const char* sText2);
+int      SEGGER_atoi       (const char* s);
+int      SEGGER_isalnum    (int c);
+int      SEGGER_isalpha    (int c);
+unsigned SEGGER_strlen     (const char* s);
+int      SEGGER_tolower    (int c);
+int      SEGGER_strcasecmp (const char* sText1, const char* sText2);
+int      SEGGER_strncasecmp(const char *sText1, const char *sText2, unsigned Count);
 
 //
 // Buffer/printf related.
@@ -215,10 +217,27 @@ int  SEGGER_snprintf     (char* pBuffer, int BufferSize, const char* sFormat, ..
 int  SEGGER_vsnprintf    (char* pBuffer, int BufferSize, const char* sFormat, va_list ParamList);
 int  SEGGER_vsnprintfEx  (SEGGER_SNPRINTF_CONTEXT* pContext, const char* sFormat, va_list ParamList);
 
-int  SEGGER_PRINTF_AddFormatter      (SEGGER_PRINTF_FORMATTER* pFormatter, SEGGER_pFormatter pfFormatter, char c);
-void SEGGER_PRINTF_AddDoubleFormatter(void);
-void SEGGER_PRINTF_AddIPFormatter    (void);
-void SEGGER_PRINTF_AddHTMLFormatter  (void);
+int  SEGGER_PRINTF_AddFormatter       (SEGGER_PRINTF_FORMATTER* pFormatter, SEGGER_pFormatter pfFormatter, char c);
+void SEGGER_PRINTF_AddDoubleFormatter (void);
+void SEGGER_PRINTF_AddIPFormatter     (void);
+void SEGGER_PRINTF_AddBLUEFormatter   (void);
+void SEGGER_PRINTF_AddCONNECTFormatter(void);
+void SEGGER_PRINTF_AddSSLFormatter    (void);
+void SEGGER_PRINTF_AddSSHFormatter    (void);
+void SEGGER_PRINTF_AddHTMLFormatter   (void);
+
+//
+// BSP abstraction API.
+//
+int  SEGGER_BSP_GetUID  (U8 abUID[16]);
+int  SEGGER_BSP_GetUID32(U32* pUID);
+void SEGGER_BSP_SetAPI  (const SEGGER_BSP_API* pAPI);
+void SEGGER_BSP_SeedUID (void);
+
+//
+// Other API.
+//
+void SEGGER_VERSION_GetString(char acText[8], unsigned Version);
 
 #if defined(__cplusplus)
 }                /* Make sure we have C-declarations in C++ programs */

SystemView_Src/SEGGER/SEGGER_RTT.h

@@ -1,9 +1,9 @@
 /*********************************************************************
-*                SEGGER Microcontroller GmbH & Co. KG                *
+*                    SEGGER Microcontroller GmbH                     *
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*       (c) 2015 - 2017  SEGGER Microcontroller GmbH & Co. KG        *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -17,24 +17,14 @@
 *                                                                    *
 * SEGGER strongly recommends to not make any changes                 *
 * to or modify the source code of this software in order to stay     *
-* compatible with the RTT protocol and J-Link.                       *
+* compatible with the SystemView and RTT protocol, and J-Link.       *
 *                                                                    *
 * Redistribution and use in source and binary forms, with or         *
 * without modification, are permitted provided that the following    *
-* conditions are met:                                                *
+* condition is met:                                                  *
 *                                                                    *
 * o Redistributions of source code must retain the above copyright   *
-*   notice, this list of conditions and the following disclaimer.    *
-*                                                                    *
-* o Redistributions in binary form must reproduce the above          *
-*   copyright notice, this list of conditions and the following      *
-*   disclaimer in the documentation and/or other materials provided  *
-*   with the distribution.                                           *
-*                                                                    *
-* o Neither the name of SEGGER Microcontroller GmbH & Co. KG         *
-*   nor the names of its contributors may be used to endorse or      *
-*   promote products derived from this software without specific     *
-*   prior written permission.                                        *
+*   notice, this condition and the following disclaimer.             *
 *                                                                    *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND             *
 * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,        *
@@ -52,15 +42,15 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: V2.52a                                    *
+*       SystemView version: 3.60                                    *
 *                                                                    *
 **********************************************************************
 ---------------------------END-OF-HEADER------------------------------
 File    : SEGGER_RTT.h
 Purpose : Implementation of SEGGER real-time transfer which allows
-          real-time communication on targets which support debugger 
+          real-time communication on targets which support debugger
           memory accesses while the CPU is running.
-Revision: $Rev: 6849 $
+Revision: $Rev: 25842 $
 ----------------------------------------------------------------------
 */
 
@@ -69,6 +59,234 @@ Revision: $Rev: 6849 $
 
 #include "SEGGER_RTT_Conf.h"
 
+/*********************************************************************
+*
+*       Defines, defaults
+*
+**********************************************************************
+*/
+
+#ifndef RTT_USE_ASM
+  //
+  // Some cores support out-of-order memory accesses (reordering of memory accesses in the core)
+  // For such cores, we need to define a memory barrier to guarantee the order of certain accesses to the RTT ring buffers.
+  // Needed for:
+  //   Cortex-M7 (ARMv7-M)
+  //   Cortex-M23 (ARM-v8M)
+  //   Cortex-M33 (ARM-v8M)
+  //   Cortex-A/R (ARM-v7A/R)
+  //
+  // We do not explicitly check for "Embedded Studio" as the compiler in use determines what we support.
+  // You can use an external toolchain like IAR inside ES. So there is no point in checking for "Embedded Studio"
+  //
+  #if (defined __CROSSWORKS_ARM)                  // Rowley Crossworks
+    #define _CC_HAS_RTT_ASM_SUPPORT 1
+    #if (defined __ARM_ARCH_7M__)                 // Cortex-M3
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+    #elif (defined __ARM_ARCH_7EM__)              // Cortex-M4/M7
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif (defined __ARM_ARCH_8M_BASE__)          // Cortex-M23
+      #define _CORE_HAS_RTT_ASM_SUPPORT 0
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif (defined __ARM_ARCH_8M_MAIN__)          // Cortex-M33
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif (defined(__ARM_ARCH_8_1M_MAIN__))       // Cortex-M85
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #else
+      #define _CORE_HAS_RTT_ASM_SUPPORT 0
+    #endif
+  #elif (defined __ARMCC_VERSION)
+    //
+    // ARM compiler
+    // ARM compiler V6.0 and later is clang based.
+    // Our ASM part is compatible to clang.
+    //
+    #if (__ARMCC_VERSION >= 6000000)
+      #define _CC_HAS_RTT_ASM_SUPPORT 0
+    #else
+      #define _CC_HAS_RTT_ASM_SUPPORT 0
+    #endif
+    #if (defined __ARM_ARCH_6M__)                 // Cortex-M0 / M1
+      #define _CORE_HAS_RTT_ASM_SUPPORT 0         // No ASM support for this architecture
+    #elif (defined __ARM_ARCH_7M__)               // Cortex-M3
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+    #elif (defined __ARM_ARCH_7EM__)              // Cortex-M4/M7
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif (defined __ARM_ARCH_8M_BASE__)          // Cortex-M23
+      #define _CORE_HAS_RTT_ASM_SUPPORT 0
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif (defined __ARM_ARCH_8M_MAIN__)          // Cortex-M33
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif (defined __ARM_ARCH_8_1M_MAIN__)        // Cortex-M85
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif \
+    ((defined __ARM_ARCH_7A__) || (defined __ARM_ARCH_7R__)) || \   // Cortex-A/R ARMv7-A/R & ARMv8-A/R
+    ((defined __ARM_ARCH_8A__) || (defined __ARM_ARCH_8R__))
+      //
+      // Cortex-A/R ARMv7-A/R & ARMv8-A/R
+      //
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #else
+      #define _CORE_HAS_RTT_ASM_SUPPORT 0
+    #endif
+  #elif ((defined __GNUC__) || (defined __clang__))
+    //
+    // GCC / Clang
+    //
+    #define _CC_HAS_RTT_ASM_SUPPORT 1
+    // ARM 7/9: __ARM_ARCH_5__ / __ARM_ARCH_5E__ / __ARM_ARCH_5T__ / __ARM_ARCH_5T__ / __ARM_ARCH_5TE__
+    #if (defined __ARM_ARCH_7M__)                 // Cortex-M3
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+    #elif (defined __ARM_ARCH_7EM__)              // Cortex-M4/M7
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+      #define _CORE_NEEDS_DMB           1         // Only Cortex-M7 needs a DMB but we cannot distinguish M4 and M7 here...
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif (defined __ARM_ARCH_8M_BASE__)          // Cortex-M23
+      #define _CORE_HAS_RTT_ASM_SUPPORT 0
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif (defined __ARM_ARCH_8M_MAIN__)          // Cortex-M33
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif (defined __ARM_ARCH_8_1M_MAIN__)        // Cortex-M85
+      #define _CORE_HAS_RTT_ASM_SUPPORT 1
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #elif \
+    (defined __ARM_ARCH_7A__) || (defined __ARM_ARCH_7R__) || \
+    (defined __ARM_ARCH_8A__) || (defined __ARM_ARCH_8R__)
+      //
+      // Cortex-A/R ARMv7-A/R & ARMv8-A/R
+      //
+      #define _CORE_NEEDS_DMB           1
+      #define RTT__DMB() __asm volatile ("dmb\n" : : :);
+    #else
+      #define _CORE_HAS_RTT_ASM_SUPPORT 0
+    #endif
+  #elif ((defined __IASMARM__) || (defined __ICCARM__))
+    //
+    // IAR assembler/compiler
+    //
+    #define _CC_HAS_RTT_ASM_SUPPORT 1
+    #if (__VER__ < 6300000)
+      #define VOLATILE
+    #else
+      #define VOLATILE volatile
+    #endif
+    #if (defined __ARM7M__)                            // Needed for old versions that do not know the define yet
+      #if (__CORE__ == __ARM7M__)                      // Cortex-M3
+        #define _CORE_HAS_RTT_ASM_SUPPORT 1
+      #endif
+    #endif
+    #if (defined __ARM7EM__)
+      #if (__CORE__ == __ARM7EM__)                     // Cortex-M4/M7
+        #define _CORE_HAS_RTT_ASM_SUPPORT 1
+        #define _CORE_NEEDS_DMB 1
+        #define RTT__DMB() asm VOLATILE ("DMB");
+      #endif
+    #endif
+    #if (defined __ARM8M_BASELINE__)
+      #if (__CORE__ == __ARM8M_BASELINE__)             // Cortex-M23
+        #define _CORE_HAS_RTT_ASM_SUPPORT 0
+        #define _CORE_NEEDS_DMB 1
+        #define RTT__DMB() asm VOLATILE ("DMB");
+      #endif
+    #endif
+    #if (defined __ARM8M_MAINLINE__)
+      #if (__CORE__ == __ARM8M_MAINLINE__)             // Cortex-M33
+        #define _CORE_HAS_RTT_ASM_SUPPORT 1
+        #define _CORE_NEEDS_DMB 1
+        #define RTT__DMB() asm VOLATILE ("DMB");
+      #endif
+    #endif
+    #if (defined __ARM8EM_MAINLINE__)
+      #if (__CORE__ == __ARM8EM_MAINLINE__)            // Cortex-???
+        #define _CORE_HAS_RTT_ASM_SUPPORT 1
+        #define _CORE_NEEDS_DMB 1
+        #define RTT__DMB() asm VOLATILE ("DMB");
+      #endif
+    #endif
+    #if\
+    ((defined __ARM7A__) && (__CORE__ == __ARM7A__)) || \
+    ((defined __ARM7R__) && (__CORE__ == __ARM7R__)) || \
+    ((defined __ARM8A__) && (__CORE__ == __ARM8A__)) || \
+    ((defined __ARM8R__) && (__CORE__ == __ARM8R__))
+      //
+      // Cortex-A/R ARMv7-A/R & ARMv8-A/R
+      //
+       #define _CORE_NEEDS_DMB 1
+      #define RTT__DMB() asm VOLATILE ("DMB");
+    #endif
+  #else
+    //
+    // Other compilers
+    //
+    #define _CC_HAS_RTT_ASM_SUPPORT   0
+    #define _CORE_HAS_RTT_ASM_SUPPORT 0
+  #endif
+  //
+  // If IDE and core support the ASM version, enable ASM version by default
+  //
+  #ifndef _CORE_HAS_RTT_ASM_SUPPORT
+    #define _CORE_HAS_RTT_ASM_SUPPORT 0              // Default for unknown cores
+  #endif
+  #if (_CC_HAS_RTT_ASM_SUPPORT && _CORE_HAS_RTT_ASM_SUPPORT)
+    #define RTT_USE_ASM                           (1)
+  #else
+    #define RTT_USE_ASM                           (0)
+  #endif
+#endif
+
+#ifndef _CORE_NEEDS_DMB
+  #define _CORE_NEEDS_DMB 0
+#endif
+
+#ifndef RTT__DMB
+  #if _CORE_NEEDS_DMB
+    #error "Don't know how to place inline assembly for DMB"
+  #else
+    #define RTT__DMB()
+  #endif
+#endif
+
+#ifndef SEGGER_RTT_CPU_CACHE_LINE_SIZE
+  #define SEGGER_RTT_CPU_CACHE_LINE_SIZE (0)   // On most target systems where RTT is used, we do not have a CPU cache, therefore 0 is a good default here
+#endif
+
+#ifndef SEGGER_RTT_UNCACHED_OFF
+  #if SEGGER_RTT_CPU_CACHE_LINE_SIZE
+    #error "SEGGER_RTT_UNCACHED_OFF must be defined when setting SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0"
+  #else
+    #define SEGGER_RTT_UNCACHED_OFF (0)
+  #endif
+#endif
+#if RTT_USE_ASM
+  #if SEGGER_RTT_CPU_CACHE_LINE_SIZE
+    #error "RTT_USE_ASM is not available if SEGGER_RTT_CPU_CACHE_LINE_SIZE != 0"
+  #endif
+#endif
+
+#ifndef SEGGER_RTT_ASM  // defined when SEGGER_RTT.h is included from assembly file
+#include <stdlib.h>
+#include <stdarg.h>
+#include <stdint.h>
+
 /*********************************************************************
 *
 *       Defines, fixed
@@ -76,6 +294,21 @@ Revision: $Rev: 6849 $
 **********************************************************************
 */
 
+//
+// Determine how much we must pad the control block to make it a multiple of a cache line in size
+// Assuming: U8 = 1B
+//           U16 = 2B
+//           U32 = 4B
+//           U8/U16/U32* = 4B
+//
+#if SEGGER_RTT_CPU_CACHE_LINE_SIZE    // Avoid division by zero in case we do not have any cache
+  #define SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(NumBytes) (((NumBytes + SEGGER_RTT_CPU_CACHE_LINE_SIZE - 1) / SEGGER_RTT_CPU_CACHE_LINE_SIZE) * SEGGER_RTT_CPU_CACHE_LINE_SIZE)
+#else
+  #define SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(NumBytes) (NumBytes)
+#endif
+#define SEGGER_RTT__CB_SIZE                              (16 + 4 + 4 + (SEGGER_RTT_MAX_NUM_UP_BUFFERS * 24) + (SEGGER_RTT_MAX_NUM_DOWN_BUFFERS * 24))
+#define SEGGER_RTT__CB_PADDING                           (SEGGER_RTT__ROUND_UP_2_CACHE_LINE_SIZE(SEGGER_RTT__CB_SIZE) - SEGGER_RTT__CB_SIZE)
+
 /*********************************************************************
 *
 *       Types
@@ -93,7 +326,7 @@ typedef struct {
             unsigned SizeOfBuffer;  // Buffer size in bytes. Note that one byte is lost, as this implementation does not fill up the buffer in order to avoid the problem of being unable to distinguish between full and empty.
             unsigned WrOff;         // Position of next item to be written by either target.
   volatile  unsigned RdOff;         // Position of next item to be read by host. Must be volatile since it may be modified by host.
-            unsigned Flags;         // Contains configuration flags
+            unsigned Flags;         // Contains configuration flags. Flags[31:24] are used for validity check and must be zero. Flags[23:2] are reserved for future use. Flags[1:0] = RTT operating mode.
 } SEGGER_RTT_BUFFER_UP;
 
 //
@@ -106,7 +339,7 @@ typedef struct {
             unsigned SizeOfBuffer;  // Buffer size in bytes. Note that one byte is lost, as this implementation does not fill up the buffer in order to avoid the problem of being unable to distinguish between full and empty.
   volatile  unsigned WrOff;         // Position of next item to be written by host. Must be volatile since it may be modified by host.
             unsigned RdOff;         // Position of next item to be read by target (down-buffer).
-            unsigned Flags;         // Contains configuration flags
+            unsigned Flags;         // Contains configuration flags. Flags[31:24] are used for validity check and must be zero. Flags[23:2] are reserved for future use. Flags[1:0] = RTT operating mode.
 } SEGGER_RTT_BUFFER_DOWN;
 
 //
@@ -120,6 +353,9 @@ typedef struct {
   int                     MaxNumDownBuffers;                        // Initialized to SEGGER_RTT_MAX_NUM_DOWN_BUFFERS (type. 2)
   SEGGER_RTT_BUFFER_UP    aUp[SEGGER_RTT_MAX_NUM_UP_BUFFERS];       // Up buffers, transferring information up from target via debug probe to host
   SEGGER_RTT_BUFFER_DOWN  aDown[SEGGER_RTT_MAX_NUM_DOWN_BUFFERS];   // Down buffers, transferring information down from host via debug probe to target
+#if SEGGER_RTT__CB_PADDING
+  unsigned char           aDummy[SEGGER_RTT__CB_PADDING];
+#endif
 } SEGGER_RTT_CB;
 
 /*********************************************************************
@@ -146,6 +382,7 @@ int          SEGGER_RTT_ConfigDownBuffer        (unsigned BufferIndex, const cha
 int          SEGGER_RTT_GetKey                  (void);
 unsigned     SEGGER_RTT_HasData                 (unsigned BufferIndex);
 int          SEGGER_RTT_HasKey                  (void);
+unsigned     SEGGER_RTT_HasDataUp               (unsigned BufferIndex);
 void         SEGGER_RTT_Init                    (void);
 unsigned     SEGGER_RTT_Read                    (unsigned BufferIndex,       void* pBuffer, unsigned BufferSize);
 unsigned     SEGGER_RTT_ReadNoLock              (unsigned BufferIndex,       void* pData,   unsigned BufferSize);
@@ -157,15 +394,35 @@ int          SEGGER_RTT_WaitKey                 (void);
 unsigned     SEGGER_RTT_Write                   (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
 unsigned     SEGGER_RTT_WriteNoLock             (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
 unsigned     SEGGER_RTT_WriteSkipNoLock         (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
+unsigned     SEGGER_RTT_ASM_WriteSkipNoLock     (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
 unsigned     SEGGER_RTT_WriteString             (unsigned BufferIndex, const char* s);
 void         SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
 unsigned     SEGGER_RTT_PutChar                 (unsigned BufferIndex, char c);
 unsigned     SEGGER_RTT_PutCharSkip             (unsigned BufferIndex, char c);
 unsigned     SEGGER_RTT_PutCharSkipNoLock       (unsigned BufferIndex, char c);
+unsigned     SEGGER_RTT_GetAvailWriteSpace      (unsigned BufferIndex);
+unsigned     SEGGER_RTT_GetBytesInBuffer        (unsigned BufferIndex);
 //
 // Function macro for performance optimization
 //
-#define      SEGGER_RTT_HASDATA(n)       (_SEGGER_RTT.aDown[n].WrOff - _SEGGER_RTT.aDown[n].RdOff)
+#define      SEGGER_RTT_HASDATA(n)       (((SEGGER_RTT_BUFFER_DOWN*)((uintptr_t)&_SEGGER_RTT.aDown[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_DOWN*)((uintptr_t)&_SEGGER_RTT.aDown[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff)
+
+#if RTT_USE_ASM
+  #define SEGGER_RTT_WriteSkipNoLock  SEGGER_RTT_ASM_WriteSkipNoLock
+#endif
+
+/*********************************************************************
+*
+*       RTT transfer functions to send RTT data via other channels.
+*
+**********************************************************************
+*/
+unsigned     SEGGER_RTT_ReadUpBuffer            (unsigned BufferIndex, void* pBuffer, unsigned BufferSize);
+unsigned     SEGGER_RTT_ReadUpBufferNoLock      (unsigned BufferIndex, void* pData, unsigned BufferSize);
+unsigned     SEGGER_RTT_WriteDownBuffer         (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
+unsigned     SEGGER_RTT_WriteDownBufferNoLock   (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes);
+
+#define      SEGGER_RTT_HASDATA_UP(n)    (((SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff)   // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly
 
 /*********************************************************************
 *
@@ -173,8 +430,8 @@ unsigned     SEGGER_RTT_PutCharSkipNoLock       (unsigned BufferIndex, char c);
 *
 **********************************************************************
 */
-int     SEGGER_RTT_SetTerminal        (char TerminalId);
-int     SEGGER_RTT_TerminalOut        (char TerminalId, const char* s);
+int     SEGGER_RTT_SetTerminal        (unsigned char TerminalId);
+int     SEGGER_RTT_TerminalOut        (unsigned char TerminalId, const char* s);
 
 /*********************************************************************
 *
@@ -183,10 +440,21 @@ int     SEGGER_RTT_TerminalOut        (char TerminalId, const char* s);
 **********************************************************************
 */
 int SEGGER_RTT_printf(unsigned BufferIndex, const char * sFormat, ...);
+int SEGGER_RTT_vprintf(unsigned BufferIndex, const char * sFormat, va_list * pParamList);
+
 #ifdef __cplusplus
   }
 #endif
 
+#endif // ifndef(SEGGER_RTT_ASM)
+
+//
+// For some environments, NULL may not be defined until certain headers are included
+//
+#ifndef NULL
+  #define NULL  ((void*)0)
+#endif
+
 /*********************************************************************
 *
 *       Defines
@@ -197,53 +465,53 @@ int SEGGER_RTT_printf(unsigned BufferIndex, const char * sFormat, ...);
 //
 // Operating modes. Define behavior if buffer is full (not enough space for entire message)
 //
-#define SEGGER_RTT_MODE_NO_BLOCK_SKIP         (0U)     // Skip. Do not block, output nothing. (Default)
-#define SEGGER_RTT_MODE_NO_BLOCK_TRIM         (1U)     // Trim: Do not block, output as much as fits.
-#define SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL    (2U)     // Block: Wait until there is space in the buffer.
-#define SEGGER_RTT_MODE_MASK                  (3U)
+#define SEGGER_RTT_MODE_NO_BLOCK_SKIP         (0)     // Skip. Do not block, output nothing. (Default)
+#define SEGGER_RTT_MODE_NO_BLOCK_TRIM         (1)     // Trim: Do not block, output as much as fits.
+#define SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL    (2)     // Block: Wait until there is space in the buffer.
+#define SEGGER_RTT_MODE_MASK                  (3)
 
 //
 // Control sequences, based on ANSI.
 // Can be used to control color, and clear the screen
 //
-#define RTT_CTRL_RESET                ""         // Reset to default colors
-#define RTT_CTRL_CLEAR                ""         // Clear screen, reposition cursor to top left
-
-#define RTT_CTRL_TEXT_BLACK           ""
-#define RTT_CTRL_TEXT_RED             ""
-#define RTT_CTRL_TEXT_GREEN           ""
-#define RTT_CTRL_TEXT_YELLOW          ""
-#define RTT_CTRL_TEXT_BLUE            ""
-#define RTT_CTRL_TEXT_MAGENTA         ""
-#define RTT_CTRL_TEXT_CYAN            ""
-#define RTT_CTRL_TEXT_WHITE           ""
-
-#define RTT_CTRL_TEXT_BRIGHT_BLACK    ""
-#define RTT_CTRL_TEXT_BRIGHT_RED      ""
-#define RTT_CTRL_TEXT_BRIGHT_GREEN    ""
-#define RTT_CTRL_TEXT_BRIGHT_YELLOW   ""
-#define RTT_CTRL_TEXT_BRIGHT_BLUE     ""
-#define RTT_CTRL_TEXT_BRIGHT_MAGENTA  ""
-#define RTT_CTRL_TEXT_BRIGHT_CYAN     ""
-#define RTT_CTRL_TEXT_BRIGHT_WHITE    ""
-
-#define RTT_CTRL_BG_BLACK             ""
-#define RTT_CTRL_BG_RED               ""
-#define RTT_CTRL_BG_GREEN             ""
-#define RTT_CTRL_BG_YELLOW            ""
-#define RTT_CTRL_BG_BLUE              ""
-#define RTT_CTRL_BG_MAGENTA           ""
-#define RTT_CTRL_BG_CYAN              ""
-#define RTT_CTRL_BG_WHITE             ""
-
-#define RTT_CTRL_BG_BRIGHT_BLACK      ""
-#define RTT_CTRL_BG_BRIGHT_RED        ""
-#define RTT_CTRL_BG_BRIGHT_GREEN      ""
-#define RTT_CTRL_BG_BRIGHT_YELLOW     ""
-#define RTT_CTRL_BG_BRIGHT_BLUE       ""
-#define RTT_CTRL_BG_BRIGHT_MAGENTA    ""
-#define RTT_CTRL_BG_BRIGHT_CYAN       ""
-#define RTT_CTRL_BG_BRIGHT_WHITE      ""
+#define RTT_CTRL_RESET                "\x1B[0m"         // Reset to default colors
+#define RTT_CTRL_CLEAR                "\x1B[2J"         // Clear screen, reposition cursor to top left
+
+#define RTT_CTRL_TEXT_BLACK           "\x1B[2;30m"
+#define RTT_CTRL_TEXT_RED             "\x1B[2;31m"
+#define RTT_CTRL_TEXT_GREEN           "\x1B[2;32m"
+#define RTT_CTRL_TEXT_YELLOW          "\x1B[2;33m"
+#define RTT_CTRL_TEXT_BLUE            "\x1B[2;34m"
+#define RTT_CTRL_TEXT_MAGENTA         "\x1B[2;35m"
+#define RTT_CTRL_TEXT_CYAN            "\x1B[2;36m"
+#define RTT_CTRL_TEXT_WHITE           "\x1B[2;37m"
+
+#define RTT_CTRL_TEXT_BRIGHT_BLACK    "\x1B[1;30m"
+#define RTT_CTRL_TEXT_BRIGHT_RED      "\x1B[1;31m"
+#define RTT_CTRL_TEXT_BRIGHT_GREEN    "\x1B[1;32m"
+#define RTT_CTRL_TEXT_BRIGHT_YELLOW   "\x1B[1;33m"
+#define RTT_CTRL_TEXT_BRIGHT_BLUE     "\x1B[1;34m"
+#define RTT_CTRL_TEXT_BRIGHT_MAGENTA  "\x1B[1;35m"
+#define RTT_CTRL_TEXT_BRIGHT_CYAN     "\x1B[1;36m"
+#define RTT_CTRL_TEXT_BRIGHT_WHITE    "\x1B[1;37m"
+
+#define RTT_CTRL_BG_BLACK             "\x1B[24;40m"
+#define RTT_CTRL_BG_RED               "\x1B[24;41m"
+#define RTT_CTRL_BG_GREEN             "\x1B[24;42m"
+#define RTT_CTRL_BG_YELLOW            "\x1B[24;43m"
+#define RTT_CTRL_BG_BLUE              "\x1B[24;44m"
+#define RTT_CTRL_BG_MAGENTA           "\x1B[24;45m"
+#define RTT_CTRL_BG_CYAN              "\x1B[24;46m"
+#define RTT_CTRL_BG_WHITE             "\x1B[24;47m"
+
+#define RTT_CTRL_BG_BRIGHT_BLACK      "\x1B[4;40m"
+#define RTT_CTRL_BG_BRIGHT_RED        "\x1B[4;41m"
+#define RTT_CTRL_BG_BRIGHT_GREEN      "\x1B[4;42m"
+#define RTT_CTRL_BG_BRIGHT_YELLOW     "\x1B[4;43m"
+#define RTT_CTRL_BG_BRIGHT_BLUE       "\x1B[4;44m"
+#define RTT_CTRL_BG_BRIGHT_MAGENTA    "\x1B[4;45m"
+#define RTT_CTRL_BG_BRIGHT_CYAN       "\x1B[4;46m"
+#define RTT_CTRL_BG_BRIGHT_WHITE      "\x1B[4;47m"
 
 #define RTT_TRACE_ID_OFFSET           (32u)
 

SystemView_Src/SEGGER/SEGGER_SYSVIEW.h

@@ -1,9 +1,9 @@
 /*********************************************************************
-*                SEGGER Microcontroller GmbH & Co. KG                *
+*                    SEGGER Microcontroller GmbH                     *
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*       (c) 2015 - 2017  SEGGER Microcontroller GmbH & Co. KG        *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -17,24 +17,14 @@
 *                                                                    *
 * SEGGER strongly recommends to not make any changes                 *
 * to or modify the source code of this software in order to stay     *
-* compatible with the RTT protocol and J-Link.                       *
+* compatible with the SystemView and RTT protocol, and J-Link.       *
 *                                                                    *
 * Redistribution and use in source and binary forms, with or         *
 * without modification, are permitted provided that the following    *
-* conditions are met:                                                *
+* condition is met:                                                  *
 *                                                                    *
 * o Redistributions of source code must retain the above copyright   *
-*   notice, this list of conditions and the following disclaimer.    *
-*                                                                    *
-* o Redistributions in binary form must reproduce the above          *
-*   copyright notice, this list of conditions and the following      *
-*   disclaimer in the documentation and/or other materials provided  *
-*   with the distribution.                                           *
-*                                                                    *
-* o Neither the name of SEGGER Microcontroller GmbH & Co. KG         *
-*   nor the names of its contributors may be used to endorse or      *
-*   promote products derived from this software without specific     *
-*   prior written permission.                                        *
+*   notice, this condition and the following disclaimer.             *
 *                                                                    *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND             *
 * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,        *
@@ -52,13 +42,13 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: V2.52a                                    *
+*       SystemView version: 3.60                                    *
 *                                                                    *
 **********************************************************************
 -------------------------- END-OF-HEADER -----------------------------
 File    : SEGGER_SYSVIEW.h
 Purpose : System visualization API.
-Revision: $Rev: 5497 $
+Revision: $Rev: 28768 $
 */
 
 #ifndef SEGGER_SYSVIEW_H
@@ -72,6 +62,7 @@ Revision: $Rev: 5497 $
 */
 
 #include "SEGGER.h"
+#include "SEGGER_SYSVIEW_ConfDefaults.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -85,7 +76,10 @@ extern "C" {
 **********************************************************************
 */
 
-#define SEGGER_SYSVIEW_VERSION        21000
+#define SEGGER_SYSVIEW_MAJOR          3
+#define SEGGER_SYSVIEW_MINOR          32
+#define SEGGER_SYSVIEW_REV            0
+#define SEGGER_SYSVIEW_VERSION        ((SEGGER_SYSVIEW_MAJOR * 10000) + (SEGGER_SYSVIEW_MINOR * 100) + SEGGER_SYSVIEW_REV)
 
 #define SEGGER_SYSVIEW_INFO_SIZE      9   // Minimum size, which has to be reserved for a packet. 1-2 byte of message type, 0-2  byte of payload length, 1-5 bytes of timestamp.
 #define SEGGER_SYSVIEW_QUANTA_U32     5   // Maximum number of bytes to encode a U32, should be reserved for each 32-bit value in a packet.
@@ -114,15 +108,15 @@ extern "C" {
 #define   SYSVIEW_EVTID_SYSTIME_CYCLES    12
 #define   SYSVIEW_EVTID_SYSTIME_US        13
 #define   SYSVIEW_EVTID_SYSDESC           14
-#define   SYSVIEW_EVTID_USER_START        15
-#define   SYSVIEW_EVTID_USER_STOP         16
+#define   SYSVIEW_EVTID_MARK_START        15
+#define   SYSVIEW_EVTID_MARK_STOP         16
 #define   SYSVIEW_EVTID_IDLE              17
 #define   SYSVIEW_EVTID_ISR_TO_SCHEDULER  18
 #define   SYSVIEW_EVTID_TIMER_ENTER       19
 #define   SYSVIEW_EVTID_TIMER_EXIT        20
 #define   SYSVIEW_EVTID_STACK_INFO        21
 #define   SYSVIEW_EVTID_MODULEDESC        22
-
+#define   SYSVIEW_EVTID_DATA_SAMPLE       23
 #define   SYSVIEW_EVTID_INIT              24
 #define   SYSVIEW_EVTID_NAME_RESOURCE     25
 #define   SYSVIEW_EVTID_PRINT_FORMATTED   26
@@ -132,6 +126,16 @@ extern "C" {
 
 #define   SYSVIEW_EVTID_EX                31
 //
+// SystemView extended events. Sent with ID 31.
+//
+#define   SYSVIEW_EVTID_EX_MARK           0
+#define   SYSVIEW_EVTID_EX_NAME_MARKER    1
+#define   SYSVIEW_EVTID_EX_HEAP_DEFINE    2
+#define   SYSVIEW_EVTID_EX_HEAP_ALLOC     3
+#define   SYSVIEW_EVTID_EX_HEAP_ALLOC_EX  4
+#define   SYSVIEW_EVTID_EX_HEAP_FREE      5
+#define   SYSVIEW_EVTID_EX_REGISTER_DATA  6
+//
 // Event masks to disable/enable events
 //
 #define   SYSVIEW_EVTMASK_NOP               (1 << SYSVIEW_EVTID_NOP)
@@ -157,7 +161,7 @@ extern "C" {
 #define   SYSVIEW_EVTMASK_TIMER_EXIT        (1 << SYSVIEW_EVTID_TIMER_EXIT)
 #define   SYSVIEW_EVTMASK_STACK_INFO        (1 << SYSVIEW_EVTID_STACK_INFO)
 #define   SYSVIEW_EVTMASK_MODULEDESC        (1 << SYSVIEW_EVTID_MODULEDESC)
-
+#define   SYSVIEW_EVTMASK_DATA_SAMPLE       (1 << SYSVIEW_EVTID_DATA_SAMPLE)
 #define   SYSVIEW_EVTMASK_INIT              (1 << SYSVIEW_EVTID_INIT)
 #define   SYSVIEW_EVTMASK_NAME_RESOURCE     (1 << SYSVIEW_EVTID_NAME_RESOURCE)
 #define   SYSVIEW_EVTMASK_PRINT_FORMATTED   (1 << SYSVIEW_EVTID_PRINT_FORMATTED)
@@ -192,8 +196,42 @@ typedef struct {
   U32          Prio;
   U32          StackBase;
   U32          StackSize;
+  U32          StackUsage;
 } SEGGER_SYSVIEW_TASKINFO;
 
+typedef struct {
+  U32          TaskID;
+  U32          StackBase;
+  U32          StackSize;
+  U32          StackUsage;
+} SEGGER_SYSVIEW_STACKINFO;
+
+typedef struct {
+  U32          ID;
+  union {
+    U32*   pU32;
+    I32*   pI32;
+    float* pFloat;
+  } pValue;  
+} SEGGER_SYSVIEW_DATA_SAMPLE;
+
+typedef enum {
+  SEGGER_SYSVIEW_TYPE_U32   = 0,
+  SEGGER_SYSVIEW_TYPE_I32   = 1,
+  SEGGER_SYSVIEW_TYPE_FLOAT = 2
+} SEGGER_SYSVIEW_DATA_TYPE;
+
+typedef struct {
+  U32                           ID;
+  SEGGER_SYSVIEW_DATA_TYPE      DataType;
+  I32                           Offset;
+  I32                           RangeMin;
+  I32                           RangeMax;
+  float                         ScalingFactor;                   
+  const char*                   sName;
+  const char*                   sUnit;
+}  SEGGER_SYSVIEW_DATA_REGISTER;
+
 typedef struct SEGGER_SYSVIEW_MODULE_STRUCT SEGGER_SYSVIEW_MODULE;
 
 struct SEGGER_SYSVIEW_MODULE_STRUCT {
@@ -206,6 +244,29 @@ struct SEGGER_SYSVIEW_MODULE_STRUCT {
 
 typedef void (SEGGER_SYSVIEW_SEND_SYS_DESC_FUNC)(void);
 
+
+/*********************************************************************
+*
+*       Global data
+*
+**********************************************************************
+*/
+
+#ifdef   EXTERN
+  #undef EXTERN
+#endif
+
+#ifndef SEGGER_SYSVIEW_C       // Defined in SEGGER_SYSVIEW.c which includes this header beside other C-files
+  #define EXTERN extern
+#else
+  #define EXTERN
+#endif
+
+EXTERN unsigned int SEGGER_SYSVIEW_TickCnt;
+EXTERN unsigned int SEGGER_SYSVIEW_InterruptId;
+
+#undef EXTERN
+
 /*********************************************************************
 *
 *       API functions
@@ -214,8 +275,8 @@ typedef void (SEGGER_SYSVIEW_SEND_SYS_DESC_FUNC)(void);
 */
 
 typedef struct {
-  U64  (*pfGetTime)      (void);
-  void (*pfSendTaskList) (void);
+  U64  (*pfGetTime)               (void);
+  void (*pfSendTaskList)          (void);
 } SEGGER_SYSVIEW_OS_API;
 
 /*********************************************************************
@@ -229,7 +290,12 @@ void SEGGER_SYSVIEW_Stop                          (void);
 void SEGGER_SYSVIEW_GetSysDesc                    (void);
 void SEGGER_SYSVIEW_SendTaskList                  (void);
 void SEGGER_SYSVIEW_SendTaskInfo                  (const SEGGER_SYSVIEW_TASKINFO* pInfo);
+void SEGGER_SYSVIEW_SendStackInfo                 (const SEGGER_SYSVIEW_STACKINFO* pInfo);
 void SEGGER_SYSVIEW_SendSysDesc                   (const char* sSysDesc);
+int  SEGGER_SYSVIEW_IsStarted                     (void);
+int  SEGGER_SYSVIEW_GetChannelID                  (void);
+
+void  SEGGER_SYSVIEW_SampleData                   (const SEGGER_SYSVIEW_DATA_SAMPLE *pInfo);
 
 /*********************************************************************
 *
@@ -263,10 +329,18 @@ void SEGGER_SYSVIEW_OnTaskStartExec               (U32 TaskId);
 void SEGGER_SYSVIEW_OnTaskStopExec                (void);
 void SEGGER_SYSVIEW_OnTaskStartReady              (U32 TaskId);
 void SEGGER_SYSVIEW_OnTaskStopReady               (U32 TaskId, unsigned int Cause);
-void SEGGER_SYSVIEW_OnUserStart                   (unsigned int UserId);       // Start of user defined event (such as a subroutine to profile)
-void SEGGER_SYSVIEW_OnUserStop                    (unsigned int UserId);       // Start of user defined event
+void SEGGER_SYSVIEW_MarkStart                     (unsigned int MarkerId);
+void SEGGER_SYSVIEW_MarkStop                      (unsigned int MarkerId);
+void SEGGER_SYSVIEW_Mark                          (unsigned int MarkerId);
+void SEGGER_SYSVIEW_NameMarker                    (unsigned int MarkerId, const char* sName);
+
+void SEGGER_SYSVIEW_HeapDefine                    (void* pHeap, void* pBase, unsigned int HeapSize, unsigned int MetadataSize);
+void SEGGER_SYSVIEW_HeapAlloc                     (void* pHeap, void* pUserData, unsigned int UserDataLen);
+void SEGGER_SYSVIEW_HeapAllocEx                   (void* pHeap, void* pUserData, unsigned int UserDataLen, unsigned int Tag);
+void SEGGER_SYSVIEW_HeapFree                      (void* pHeap, void* pUserData);
 
 void SEGGER_SYSVIEW_NameResource                  (U32 ResourceId, const char* sName);
+void SEGGER_SYSVIEW_RegisterData                  ( SEGGER_SYSVIEW_DATA_REGISTER* pInfo);
 
 int  SEGGER_SYSVIEW_SendPacket                    (U8* pPacket, U8* pPayloadEnd, unsigned int EventId);
 
@@ -297,13 +371,21 @@ void SEGGER_SYSVIEW_SendNumModules                (void);
 */
 #ifndef SEGGER_SYSVIEW_EXCLUDE_PRINTF // Define in project to avoid warnings about variable parameter list
 void SEGGER_SYSVIEW_PrintfHostEx                  (const char* s, U32 Options, ...);
+void SEGGER_SYSVIEW_VPrintfHostEx                 (const char* s, U32 Options, va_list* pParamList);
 void SEGGER_SYSVIEW_PrintfTargetEx                (const char* s, U32 Options, ...);
+void SEGGER_SYSVIEW_VPrintfTargetEx               (const char* s, U32 Options, va_list* pParamList);
 void SEGGER_SYSVIEW_PrintfHost                    (const char* s, ...);
+void SEGGER_SYSVIEW_VPrintfHost                   (const char* s, va_list* pParamList);
 void SEGGER_SYSVIEW_PrintfTarget                  (const char* s, ...);
+void SEGGER_SYSVIEW_VPrintfTarget                 (const char* s, va_list* pParamList);
 void SEGGER_SYSVIEW_WarnfHost                     (const char* s, ...);
+void SEGGER_SYSVIEW_VWarnfHost                    (const char* s, va_list* pParamList);
 void SEGGER_SYSVIEW_WarnfTarget                   (const char* s, ...);
+void SEGGER_SYSVIEW_VWarnfTarget                  (const char* s, va_list* pParamList);
 void SEGGER_SYSVIEW_ErrorfHost                    (const char* s, ...);
+void SEGGER_SYSVIEW_VErrorfHost                   (const char* s, va_list* pParamList);
 void SEGGER_SYSVIEW_ErrorfTarget                  (const char* s, ...);
+void SEGGER_SYSVIEW_VErrorfTarget                 (const char* s, va_list* pParamList);
 #endif
 
 void SEGGER_SYSVIEW_Print                         (const char* s);
@@ -325,10 +407,20 @@ void SEGGER_SYSVIEW_Conf                          (void);
 U32  SEGGER_SYSVIEW_X_GetTimestamp                (void);
 U32  SEGGER_SYSVIEW_X_GetInterruptId              (void);
 
+void SEGGER_SYSVIEW_X_StartComm                   (void);
+void SEGGER_SYSVIEW_X_OnEventRecorded             (unsigned NumBytes);
+
 #ifdef __cplusplus
 }
 #endif
 
+/*********************************************************************
+*
+*       Compatibility API defines
+*/
+#define SEGGER_SYSVIEW_OnUserStart      SEGGER_SYSVIEW_MarkStart
+#define SEGGER_SYSVIEW_OnUserStop       SEGGER_SYSVIEW_MarkStop
+
 #endif
 
 /*************************** End of file ****************************/

SystemView_Src/SEGGER/SEGGER_SYSVIEW_ConfDefaults.h

@@ -1,9 +1,9 @@
 /*********************************************************************
-*                SEGGER Microcontroller GmbH & Co. KG                *
+*                    SEGGER Microcontroller GmbH                     *
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*       (c) 2015 - 2017  SEGGER Microcontroller GmbH & Co. KG        *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -17,24 +17,14 @@
 *                                                                    *
 * SEGGER strongly recommends to not make any changes                 *
 * to or modify the source code of this software in order to stay     *
-* compatible with the RTT protocol and J-Link.                       *
+* compatible with the SystemView and RTT protocol, and J-Link.       *
 *                                                                    *
 * Redistribution and use in source and binary forms, with or         *
 * without modification, are permitted provided that the following    *
-* conditions are met:                                                *
+* condition is met:                                                  *
 *                                                                    *
 * o Redistributions of source code must retain the above copyright   *
-*   notice, this list of conditions and the following disclaimer.    *
-*                                                                    *
-* o Redistributions in binary form must reproduce the above          *
-*   copyright notice, this list of conditions and the following      *
-*   disclaimer in the documentation and/or other materials provided  *
-*   with the distribution.                                           *
-*                                                                    *
-* o Neither the name of SEGGER Microcontroller GmbH & Co. KG         *
-*   nor the names of its contributors may be used to endorse or      *
-*   promote products derived from this software without specific     *
-*   prior written permission.                                        *
+*   notice, this condition and the following disclaimer.             *
 *                                                                    *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND             *
 * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,        *
@@ -52,14 +42,14 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: V2.52a                                    *
+*       SystemView version: 3.60                                    *
 *                                                                    *
 **********************************************************************
 -------------------------- END-OF-HEADER -----------------------------
 File    : SEGGER_SYSVIEW_ConfDefaults.h
 Purpose : Defines defaults for configurable defines used in
           SEGGER SystemView.
-Revision: $Rev: 6414 $
+Revision: $Rev: 26230 $
 */
 
 #ifndef SEGGER_SYSVIEW_CONFDEFAULTS_H
@@ -81,19 +71,182 @@ extern "C" {
 
 /*********************************************************************
 *
-*       Configuration defaults
+*       Defines, fixed
 *
 **********************************************************************
 */
+//
+// Use auto-detection for SEGGER_SYSVIEW_CORE define
+// based on compiler-/toolchain-specific defines
+// to define SEGGER_SYSVIEW_GET_INTERRUPT_ID and SEGGER_SYSVIEW_GET_TIMESTAMP
+//
+#define SEGGER_SYSVIEW_CORE_OTHER   0
+#define SEGGER_SYSVIEW_CORE_CM0     1 // Cortex-M0/M0+/M1
+#define SEGGER_SYSVIEW_CORE_CM3     2 // Cortex-M3/M4/M7
+#define SEGGER_SYSVIEW_CORE_RX      3 // Renesas RX
+#ifndef SEGGER_SYSVIEW_CORE
+  #if (defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __SEGGER_CC__) || (defined __GNUC__) || (defined __clang__)
+    #if (defined __ARM_ARCH_6M__) || (defined __ARM_ARCH_8M_BASE__)
+      #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
+    #elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__))
+      #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
+    #endif
+  #elif defined(__ICCARM__)
+    #if (defined (__ARM6M__)          && (__CORE__ == __ARM6M__))          \
+     || (defined (__ARM8M_BASELINE__) && (__CORE__ == __ARM8M_BASELINE__))
+      #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
+    #elif (defined (__ARM7EM__)         && (__CORE__ == __ARM7EM__))         \
+       || (defined (__ARM7M__)          && (__CORE__ == __ARM7M__))          \
+       || (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) \
+       || (defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__))
+      #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
+    #endif
+  #elif defined(__CC_ARM)
+    #if (defined(__TARGET_ARCH_6S_M))
+      #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
+    #elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M))
+      #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
+    #endif
+  #elif defined(__TI_ARM__)
+    #ifdef __TI_ARM_V6M0__
+      #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM0
+    #elif (defined(__TI_ARM_V7M3__) || defined(__TI_ARM_V7M4__))
+      #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_CM3
+    #endif
+  #elif defined(__ICCRX__)
+    #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX
+  #elif defined(__RX)
+    #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_RX
+  #endif
 
-// Number of bytes that SystemView uses for a buffer.
-#ifndef   SEGGER_SYSVIEW_RTT_BUFFER_SIZE
-  #define SEGGER_SYSVIEW_RTT_BUFFER_SIZE    1024
+  #ifndef   SEGGER_SYSVIEW_CORE
+    #define SEGGER_SYSVIEW_CORE SEGGER_SYSVIEW_CORE_OTHER
+  #endif
+#endif
+
+
+/*********************************************************************
+*
+*       Defines, defaults
+*
+**********************************************************************
+*/
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_APP_NAME
+*
+*  Description
+*    The application name to be displayed in SystemView.
+*  Default
+*    "SystemView-enabled Application"
+*  Notes
+*    Convenience define to be used for SEGGER_SYSVIEW_SendSysDesc().
+*/
+#ifndef   SEGGER_SYSVIEW_APP_NAME
+  #define SEGGER_SYSVIEW_APP_NAME                 "SystemView-enabled Application"
+#endif
+
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_DEVICE_NAME
+*
+*  Description
+*    The target device name to be displayed in SystemView.
+*  Default
+*    "undefined device"
+*  Notes
+*    Convenience define to be used for SEGGER_SYSVIEW_SendSysDesc().
+*/
+#ifndef   SEGGER_SYSVIEW_DEVICE_NAME
+  #define SEGGER_SYSVIEW_DEVICE_NAME              "undefined device"
+#endif
+
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_GET_INTERRUPT_ID()
+*
+*  Description
+*    Function macro to retrieve the Id of the currently active
+*    interrupt.
+*  Default
+*    Call user-supplied function SEGGER_SYSVIEW_X_GetInterruptId().
+*  Notes
+*    For some known compilers and cores, a ready-to-use, core-specific
+*    default is set.
+*    ARMv7M: Read ICSR[8:0] (active vector)
+*    ARMv6M: Read ICSR[5:0] (active vector)
+*/
+#ifndef SEGGER_SYSVIEW_GET_INTERRUPT_ID
+  #if SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3
+    #define SEGGER_SYSVIEW_GET_INTERRUPT_ID()     ((*(U32*)(0xE000ED04)) & 0x1FF)         // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[8:0] = active vector)
+  #elif SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM0
+    #if defined(__ICCARM__)
+      #if (__VER__ > 6010000)
+        #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() (__get_IPSR())                          // Workaround for IAR, which might do a byte-access to 0xE000ED04. Read IPSR instead.
+      #else
+        #define SEGGER_SYSVIEW_GET_INTERRUPT_ID() ((*(U32*)(0xE000ED04)) & 0x3F)          // Older versions of IAR do not include __get_IPSR, but might also not optimize to byte-access.
+      #endif
+    #else
+      #define SEGGER_SYSVIEW_GET_INTERRUPT_ID()   ((*(U32*)(0xE000ED04)) & 0x3F)          // Get the currently active interrupt Id. (i.e. read Cortex-M ICSR[5:0] = active vector)
+    #endif
+  #else
+    #define SEGGER_SYSVIEW_GET_INTERRUPT_ID()     SEGGER_SYSVIEW_X_GetInterruptId()       // Get the currently active interrupt Id from the user-provided function.
+  #endif
+#endif
+
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_GET_TIMESTAMP()
+*
+*  Description
+*    Function macro to retrieve a system timestamp for SYSVIEW events.
+*  Default
+*    Call user-supplied function SEGGER_SYSVIEW_X_GetTimestamp().
+*  Notes
+*    For some known compilers and cores, a ready-to-use, core-specific
+*    default is set.
+*    ARMv7M: Read Cortex-M Cycle Count register.
+*
+*    The system timestamp clock frequency has to be passed in
+*    SEGGER_SYSVIEW_Init().
+*/
+#ifndef SEGGER_SYSVIEW_GET_TIMESTAMP
+  #if defined (SEGGER_SYSVIEW_CORE) && (SEGGER_SYSVIEW_CORE == SEGGER_SYSVIEW_CORE_CM3)
+    #define SEGGER_SYSVIEW_GET_TIMESTAMP()        (*(U32 *)(0xE0001004))                  // Retrieve a system timestamp. Cortex-M cycle counter.
+  #else
+    #define SEGGER_SYSVIEW_GET_TIMESTAMP()        SEGGER_SYSVIEW_X_GetTimestamp()         // Retrieve a system timestamp via user-defined function
+  #endif
+#endif
+
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_TIMESTAMP_BITS
+*
+*  Description
+*    Number of valid (low-order) bits delivered in system timestamp.
+*  Default
+*    32
+*  Notes
+*    Value has to match system timestamp clock source.
+*/
+// Define number of valid bits low-order delivered by clock source.
+#ifndef   SEGGER_SYSVIEW_TIMESTAMP_BITS
+  #define SEGGER_SYSVIEW_TIMESTAMP_BITS           32
 #endif
 
-// The RTT channel that SystemView will use.
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_RTT_CHANNEL
+*
+*  Description
+*    The RTT channel that SystemView will use.
+*  Default
+*    0: Auto selection.
+*  Notes
+*    Value has to be lower than SEGGER_RTT_MAX_NUM_UP_BUFFERS.
+*/
 #ifndef   SEGGER_SYSVIEW_RTT_CHANNEL
-  #define SEGGER_SYSVIEW_RTT_CHANNEL        0
+  #define SEGGER_SYSVIEW_RTT_CHANNEL              0
 #endif
 // Sanity check of RTT channel
 #if (SEGGER_SYSVIEW_RTT_CHANNEL == 0) && (SEGGER_RTT_MAX_NUM_UP_BUFFERS < 2)
@@ -102,75 +255,303 @@ extern "C" {
   #error "SEGGER_RTT_MAX_NUM_UP_BUFFERS  in SEGGER_RTT_Conf.h has to be > SEGGER_SYSVIEW_RTT_CHANNEL!"
 #endif
 
-// Place the SystemView buffer into its own/the RTT section
-#if !(defined SEGGER_SYSVIEW_BUFFER_SECTION) && (defined SEGGER_RTT_SECTION)
-  #define SEGGER_SYSVIEW_BUFFER_SECTION            SEGGER_RTT_SECTION
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_RTT_BUFFER_SIZE
+*
+*  Description
+*    Number of bytes that SystemView uses for the RTT buffer.
+*  Default
+*    1024
+*/
+#ifndef   SEGGER_SYSVIEW_RTT_BUFFER_SIZE
+  #define SEGGER_SYSVIEW_RTT_BUFFER_SIZE          1024
 #endif
 
-// Retrieve a system timestamp.  This gets the Cortex-M cycle counter.
-#ifndef   SEGGER_SYSVIEW_GET_TIMESTAMP
-  #error "SEGGER_SYSVIEW_GET_TIMESTAMP has to be defined in SEGGER_SYSVIEW_Conf.h!"
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE
+*
+*  Description
+*    Largest cache line size (in bytes) in the target system.
+*  Default
+*    0
+*  Notes
+*    Required in systems with caches to make sure that the SystemView
+*    RTT buffer can be aligned accordingly.
+*/
+#ifndef SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE
+  #define SEGGER_SYSVIEW_CPU_CACHE_LINE_SIZE      0
 #endif
 
-// Define number of valid bits low-order delivered by clock source.
-#ifndef   SEGGER_SYSVIEW_TIMESTAMP_BITS
-  #define SEGGER_SYSVIEW_TIMESTAMP_BITS     32
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_ID_BASE
+*
+*  Description
+*    Lowest Id reported by the application.
+*  Default
+*    0
+*  Notes
+*    Value is usually subtracted from mailboxes, semaphores, tasks,
+*    .... addresses, to compress event parameters.
+*    Should be the lowest RAM address of the system.
+*/
+#ifndef   SEGGER_SYSVIEW_ID_BASE
+  #define SEGGER_SYSVIEW_ID_BASE                  0
 #endif
 
-// Lowest Id reported by the Application.
-#ifndef   SEGGER_SYSVIEW_ID_BASE 
-  #define SEGGER_SYSVIEW_ID_BASE            0
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_ID_SHIFT
+*
+*  Description
+*    Number of bits to shift Ids.
+*  Default
+*    0
+*  Notes
+*    Ids are shifted to compress event parameters.
+*    Should match the alignment of Ids (addresses),
+*    e.g. 2 when Ids are 4 byte aligned.
+*/
+#ifndef   SEGGER_SYSVIEW_ID_SHIFT
+  #define SEGGER_SYSVIEW_ID_SHIFT                 0
 #endif
 
-// Number of bits to shift Ids to save bandwidth
-#ifndef   SEGGER_SYSVIEW_ID_SHIFT
-  #define SEGGER_SYSVIEW_ID_SHIFT           0
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_MAX_ARGUMENTS
+*
+*  Description
+*    Maximum number of arguments which are handled with SystemView
+*    print routines or may be encoded in one recording function.
+*    routines.
+*  Default
+*    16
+*/
+#ifndef   SEGGER_SYSVIEW_MAX_ARGUMENTS
+  #define SEGGER_SYSVIEW_MAX_ARGUMENTS            16
 #endif
 
-#ifndef   SEGGER_SYSVIEW_GET_INTERRUPT_ID
-  #error "SEGGER_SYSVIEW_GET_INTERRUPT_ID has to be defined in SEGGER_SYSVIEW_Conf.h!"
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_MAX_STRING_LEN
+*
+*  Description
+*    Maximum string length which can be used in SystemView print and
+*    system description routines.
+*  Default
+*    128
+*/
+#ifndef   SEGGER_SYSVIEW_MAX_STRING_LEN
+  #define SEGGER_SYSVIEW_MAX_STRING_LEN           128
 #endif
 
-#ifndef   SEGGER_SYSVIEW_MAX_ARGUMENTS
-  #define SEGGER_SYSVIEW_MAX_ARGUMENTS      16
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_SUPPORT_LONG_ID
+*
+*  Description
+*    It set, support enconding Evend Ids longer than 14 bit.
+*  Default
+*    1
+*/
+#ifndef   SEGGER_SYSVIEW_SUPPORT_LONG_ID
+  #define SEGGER_SYSVIEW_SUPPORT_LONG_ID          1
 #endif
 
-#ifndef   SEGGER_SYSVIEW_MAX_STRING_LEN
-  #define SEGGER_SYSVIEW_MAX_STRING_LEN     128
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_SUPPORT_LONG_DATA
+*
+*  Description
+*    It set, support enconding event data longer than 14 bit.
+*  Default
+*    0
+*/
+#ifndef   SEGGER_SYSVIEW_SUPPORT_LONG_DATA
+  #define SEGGER_SYSVIEW_SUPPORT_LONG_DATA        0
 #endif
 
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT
+*
+*  Description
+*    If enabled, on SEGGER_SYSVIEW_PrintHost, check the format string
+*    and if it includes unsupported formatters, use formatting on the
+*    target instead.
+*  Default
+*    0: Disabled.
+*/
 #ifndef   SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT
-  #define SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT 0
+  #define SEGGER_SYSVIEW_PRINTF_IMPLICIT_FORMAT   0
+#endif
+
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_USE_INTERNAL_RECORDER
+*
+*  Description
+*    If set, an internal recorder, such as UART or IP is used.
+*  Default
+*    0: Disabled.
+*  Notes
+*    Convenience define to be used by SEGGER_SYSVIEW_Conf(),
+*    such as in embOS configuration to enable Cortex-M cycle counter.
+*/
+#ifndef   SEGGER_SYSVIEW_USE_INTERNAL_RECORDER
+  #define SEGGER_SYSVIEW_USE_INTERNAL_RECORDER    0
 #endif
 
-// Use a static buffer instead of a buffer on the stack for packets
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_CAN_RESTART
+*
+*  Description
+*    If enabled, send the SystemView start sequence on every start
+*    command, not just on the first one.
+*    Enables restart when SystemView disconnected unexpectedly.
+*  Default
+*    1: Enabled
+*/
+#ifndef   SEGGER_SYSVIEW_CAN_RESTART
+  #define SEGGER_SYSVIEW_CAN_RESTART              1
+#endif
+
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_START_ON_INIT
+*
+*  Description
+*    Enable calling SEGGER_SYSVIEW_Start() after initialization.
+*  Default
+*    0: Disabled.
+*  Notes
+*    Convenience define to be used by SEGGER_SYSVIEW_Conf(),
+*    such as in embOS configuration.
+*/
+#ifndef   SEGGER_SYSVIEW_START_ON_INIT
+  #define SEGGER_SYSVIEW_START_ON_INIT            0
+#endif
+
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_USE_STATIC_BUFFER
+*
+*  Description
+*    If enabled, use a static buffer instead of a buffer on the stack
+*    for SystemView event packets.
+*  Default
+*    1: Enabled.
+*  Notes
+*    If enabled, the static memory use by SystemView is increased by
+*    the maximum packet size. SystemView is locked on entry of a
+*    recording function.
+*    If disabled, the stack usage by SystemView recording functions
+*    might be increased by up to the maximum packet size. SystemView
+*    is locked when writing the packet to the RTT buffer.
+*/
 #ifndef   SEGGER_SYSVIEW_USE_STATIC_BUFFER
-  #define SEGGER_SYSVIEW_USE_STATIC_BUFFER  1
+  #define SEGGER_SYSVIEW_USE_STATIC_BUFFER        1
 #endif
 
-// Maximum packet size used by SystemView for the static buffer
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_MAX_PACKET_SIZE
+*
+*  Description
+*    Maximum packet size for a SystemView event.
+*  Default
+*    Automatically calculated.
+*  Notes
+*    The maximum packet size is mainly defined by the maximum string
+*    length and the maximum number of arguments.
+*/
 #ifndef   SEGGER_SYSVIEW_MAX_PACKET_SIZE
-  #define SEGGER_SYSVIEW_MAX_PACKET_SIZE   SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_ARGUMENTS * SEGGER_SYSVIEW_QUANTA_U32
+  #define SEGGER_SYSVIEW_MAX_PACKET_SIZE          (SEGGER_SYSVIEW_INFO_SIZE + SEGGER_SYSVIEW_MAX_STRING_LEN + 2 * SEGGER_SYSVIEW_QUANTA_U32 + SEGGER_SYSVIEW_MAX_ARGUMENTS * SEGGER_SYSVIEW_QUANTA_U32)
 #endif
 
-// Use post-mortem analysis instead of real-time analysis
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_POST_MORTEM_MODE
+*
+*  Description
+*    If enabled, SystemView records for post-mortem analysis instead
+*    of real-time analysis.
+*  Default
+*    0: Disabled.
+*  Notes
+*    For more information refer to
+*    https://www.segger.com/products/development-tools/systemview/technology/post-mortem-mode
+*/
 #ifndef   SEGGER_SYSVIEW_POST_MORTEM_MODE
-  #define SEGGER_SYSVIEW_POST_MORTEM_MODE   0
+  #define SEGGER_SYSVIEW_POST_MORTEM_MODE         0
 #endif
 
-// Configure how frequently syncronization is sent
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT
+*
+*  Description
+*    Configure how frequently syncronization is sent in post-mortem
+*    mode.
+*  Default
+*    8: (1 << 8) = Every 256 Events.
+*  Notes
+*    In post-mortem mode, at least one sync has to be in the RTT buffer.
+*    Recommended sync frequency: Buffer Size / 16
+*    For more information refer to
+*    https://www.segger.com/products/development-tools/systemview/technology/post-mortem-mode
+*/
 #ifndef   SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT
-  #define SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT  8
+  #define SEGGER_SYSVIEW_SYNC_PERIOD_SHIFT        8
+#endif
+
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_ON_EVENT_RECORDED()
+*
+*  Description
+*    Function macro to notify recorder about a new event in buffer.
+*  Default
+*    undefined: Do not notify recorder.
+*  Notes
+*    Used for non-J-Link recorder,
+*    such as to enable transmission via UART or notify IP task.
+*/
+#ifndef   SEGGER_SYSVIEW_ON_EVENT_RECORDED
+  #define SEGGER_SYSVIEW_ON_EVENT_RECORDED(NumBytes)
 #endif
 
-// Lock SystemView (nestable)
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_LOCK()
+*
+*  Description
+*    Function macro to (nestable) lock SystemView recording.
+*  Default
+*    Use RTT Locking mechanism (defined by SEGGER_RTT_LOCK()).
+*  Notes
+*    If SystemView recording is not locked, recording events from
+*    interrupts and tasks may lead to unpredictable, undefined, event
+*    data.
+*/
 #ifndef   SEGGER_SYSVIEW_LOCK
-  #define SEGGER_SYSVIEW_LOCK()             SEGGER_RTT_LOCK()
+  #define SEGGER_SYSVIEW_LOCK()                   SEGGER_RTT_LOCK()
 #endif
 
-// Unlock SystemView (nestable)
+/*********************************************************************
+*
+*       Define: SEGGER_SYSVIEW_UNLOCK
+*
+*  Description
+*    Function macro to unlock SystemView recording.
+*  Default
+*    Use RTT Unlocking mechanism (defined by SEGGER_RTT_UNLOCK()).
+*/
 #ifndef   SEGGER_SYSVIEW_UNLOCK
-  #define SEGGER_SYSVIEW_UNLOCK()           SEGGER_RTT_UNLOCK()
+  #define SEGGER_SYSVIEW_UNLOCK()                 SEGGER_RTT_UNLOCK()
 #endif
 
 #ifdef __cplusplus

SystemView_Src/SEGGER/SEGGER_SYSVIEW_Int.h

@@ -1,9 +1,9 @@
 /*********************************************************************
-*                SEGGER Microcontroller GmbH & Co. KG                *
+*                    SEGGER Microcontroller GmbH                     *
 *                        The Embedded Experts                        *
 **********************************************************************
 *                                                                    *
-*       (c) 2015 - 2017  SEGGER Microcontroller GmbH & Co. KG        *
+*            (c) 1995 - 2024 SEGGER Microcontroller GmbH             *
 *                                                                    *
 *       www.segger.com     Support: support@segger.com               *
 *                                                                    *
@@ -17,24 +17,14 @@
 *                                                                    *
 * SEGGER strongly recommends to not make any changes                 *
 * to or modify the source code of this software in order to stay     *
-* compatible with the RTT protocol and J-Link.                       *
+* compatible with the SystemView and RTT protocol, and J-Link.       *
 *                                                                    *
 * Redistribution and use in source and binary forms, with or         *
 * without modification, are permitted provided that the following    *
-* conditions are met:                                                *
+* condition is met:                                                  *
 *                                                                    *
 * o Redistributions of source code must retain the above copyright   *
-*   notice, this list of conditions and the following disclaimer.    *
-*                                                                    *
-* o Redistributions in binary form must reproduce the above          *
-*   copyright notice, this list of conditions and the following      *
-*   disclaimer in the documentation and/or other materials provided  *
-*   with the distribution.                                           *
-*                                                                    *
-* o Neither the name of SEGGER Microcontroller GmbH & Co. KG         *
-*   nor the names of its contributors may be used to endorse or      *
-*   promote products derived from this software without specific     *
-*   prior written permission.                                        *
+*   notice, this condition and the following disclaimer.             *
 *                                                                    *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND             *
 * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,        *
@@ -52,13 +42,13 @@
 *                                                                    *
 **********************************************************************
 *                                                                    *
-*       SystemView version: V2.52a                                    *
+*       SystemView version: 3.60                                    *
 *                                                                    *
 **********************************************************************
 -------------------------- END-OF-HEADER -----------------------------
 File    : SEGGER_SYSVIEW_Int.h
 Purpose : SEGGER SystemView internal header.
-Revision: $Rev: 5068 $
+Revision: $Rev: 21281 $
 */
 
 #ifndef SEGGER_SYSVIEW_INT_H
@@ -72,8 +62,6 @@ Revision: $Rev: 5068 $
 */
 
 #include "SEGGER_SYSVIEW.h"
-#include "SEGGER_SYSVIEW_Conf.h"
-#include "SEGGER_SYSVIEW_ConfDefaults.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -97,6 +85,7 @@ typedef enum {
   SEGGER_SYSVIEW_COMMAND_ID_GET_SYSDESC,
   SEGGER_SYSVIEW_COMMAND_ID_GET_NUMMODULES,
   SEGGER_SYSVIEW_COMMAND_ID_GET_MODULEDESC,
+  SEGGER_SYSVIEW_COMMAND_ID_HEARTBEAT = 127,
   // Extended commands: Commands >= 128 have a second parameter
   SEGGER_SYSVIEW_COMMAND_ID_GET_MODULE = 128
 } SEGGER_SYSVIEW_COMMAND_ID;