bma400/libraries/examples/fifo.c

#include <stdio.h>
#include "bma400.h"

#define GRAVITY_EARTH (9.80665f) /* Earth's gravity in m/s^2 */

/* Include 2 additional frames to account for
 * the next frame already being in the FIFO
 * and the sensor time frame
 */
#define N_FRAMES        50
/* 50 Frames result in 50*7, 350 bytes.
 * A few extra for the sensor time frame and
 * in case the next frame is available too.
 */
#define FIFO_SIZE       (357 + BMA400_FIFO_BYTES_OVERREAD)
/* Delay to fill FIFO data At ODR of say 100 Hz,
 * 1 frame gets updated in 1/100 = 0.01s i.e. for
 * 50 frames we need 50 * 0.01 =  0.5 seconds delay
 */
#define WAIT_PERIOD_MS  500

void set_interface(enum bma400_intf intf, struct bma400_dev *dev);
void delay_ms(uint32_t period);
int8_t i2c_reg_write(void *intf_ptr, uint8_t i2c_addr, uint8_t reg_addr, uint8_t *reg_data, uint16_t length);
int8_t i2c_reg_read(void *intf_ptr, uint8_t i2c_addr, uint8_t reg_addr, uint8_t *reg_data, uint16_t length);
int8_t spi_reg_write(void *intf_ptr, uint8_t cs, uint8_t reg_addr, uint8_t *reg_data, uint16_t length);
int8_t spi_reg_read(void *intf_ptr, uint8_t cs, uint8_t reg_addr, uint8_t *reg_data, uint16_t length);
void print_rslt(int8_t rslt);
float lsb_to_ms2(int16_t val, float g_range, uint8_t bit_width);
float sensor_ticks_to_s(uint32_t sensor_time);

int main(int argc, char const *argv[])
{
	struct bma400_dev bma;
	struct bma400_sensor_data accel_data[N_FRAMES] = { 0 };
	struct bma400_fifo_data fifo_frame;
	struct bma400_device_conf fifo_conf;
	struct bma400_sensor_conf conf;
	int8_t rslt;
	uint16_t i;
	uint8_t fifo_buff[FIFO_SIZE] = { 0 };
	uint16_t accel_frames_req = N_FRAMES;
	float x, y, z, t;
	uint8_t n = 20; /* Read the FIFO 20 times */

	set_interface(BMA400_SPI_INTF, &bma);

	rslt = bma400_init(&bma);
	print_rslt(rslt);

	rslt = bma400_soft_reset(&bma);
	print_rslt(rslt);

	/* Select the type of configuration to be modified */
	conf.type = BMA400_ACCEL;

	/* Get the accelerometer configurations which are set in the sensor */
	rslt = bma400_get_sensor_conf(&conf, 1, &bma);
	print_rslt(rslt);

	/* Modify the desired configurations as per macros
	 * available in bma400_defs.h file */
	conf.param.accel.odr = BMA400_ODR_100HZ;
	conf.param.accel.range = BMA400_2G_RANGE;
	conf.param.accel.data_src = BMA400_DATA_SRC_ACCEL_FILT_1;

	/* Set the desired configurations to the sensor */
	rslt = bma400_set_sensor_conf(&conf, 1, &bma);
	print_rslt(rslt);

	fifo_conf.type = BMA400_FIFO_CONF;

	rslt = bma400_get_device_conf(&fifo_conf, 1, &bma);
	print_rslt(rslt);

	fifo_conf.param.fifo_conf.conf_regs = BMA400_FIFO_X_EN | BMA400_FIFO_Y_EN | BMA400_FIFO_Z_EN
					      | BMA400_FIFO_TIME_EN;
	fifo_conf.param.fifo_conf.conf_status = BMA400_ENABLE;

	rslt = bma400_set_device_conf(&fifo_conf, 1, &bma);
	print_rslt(rslt);

	rslt = bma400_set_power_mode(BMA400_NORMAL_MODE, &bma);
	print_rslt(rslt);

	while ((rslt == BMA400_OK) && n) {
		fifo_frame.data = fifo_buff;
		fifo_frame.length = FIFO_SIZE;
		bma.delay_ms(WAIT_PERIOD_MS);

		printf("Requested FIFO length : %d\r\n", fifo_frame.length);

		rslt = bma400_get_fifo_data(&fifo_frame, &bma);
		print_rslt(rslt);

		if (rslt != BMA400_OK) {
			printf("FIFO read failed\r\n");
		}

		printf("Available FIFO length : %d \r\n", fifo_frame.length);

		do {
			accel_frames_req = N_FRAMES;
			rslt = bma400_extract_accel(&fifo_frame, accel_data, &accel_frames_req, &bma);
			print_rslt(rslt);

			if (rslt != BMA400_OK) {
				printf("Accelerometer data extraction failed\r\n");
			}

			if (accel_frames_req) {
				printf("Extracted FIFO frames : %d \r\n", accel_frames_req);

				printf("Frame index, Ax[m/s2], Ay[m/s2], Az[m/s2]\r\n");
				for (i = 0; i < accel_frames_req; i++) {
					bma.delay_ms(10); /* Wait for 10ms as ODR is set to 100Hz */

					/* 12-bit accelerometer at range 2G */
					x = lsb_to_ms2(accel_data[i].x, 2, 12);
					y = lsb_to_ms2(accel_data[i].y, 2, 12);
					z = lsb_to_ms2(accel_data[i].z, 2, 12);

					printf("%d, %.2f, %.2f, %.2f\r\n", i, x, y, z);
				}
			}
		} while (accel_frames_req);

		if(fifo_frame.fifo_sensor_time) {
			t = sensor_ticks_to_s(fifo_frame.fifo_sensor_time);

			printf("FIFO sensor time : %.4fs\r\n", t);
		}
		
		if(fifo_frame.conf_change) {
			printf("FIFO configuration change: 0x%X\r\n", fifo_frame.conf_change);

			if (fifo_frame.conf_change & BMA400_FIFO_CONF0_CHANGE) {
				printf("FIFO data source configuration changed \r\n");
			}

			if (fifo_frame.conf_change & BMA400_ACCEL_CONF0_CHANGE) {
				printf("Accel filt1_bw configuration changed \r\n");
			}

			if (fifo_frame.conf_change & BMA400_ACCEL_CONF1_CHANGE) {
				printf("Accel odr/osr/range configuration changed \r\n");
			}
		}

		n--;
	}

	return 0;
}

void set_interface(enum bma400_intf intf, struct bma400_dev *dev)
{
	switch (intf) {
	case BMA400_I2C_INTF:
		dev->intf_ptr = NULL; /* To attach your interface device reference */
		dev->delay_ms = delay_ms;
		dev->dev_id = BMA400_I2C_ADDRESS_SDO_LOW;
		dev->read = i2c_reg_read;
		dev->write = i2c_reg_write;
		dev->intf = BMA400_I2C_INTF;
		break;
	case BMA400_SPI_INTF:
		dev->intf_ptr = NULL; /* To attach your interface device reference */
		dev->dev_id = 0; /* Could be used to identify the chip select line. */
		dev->read = spi_reg_read;
		dev->write = spi_reg_write;
		dev->intf = BMA400_SPI_INTF;
		break;
	default:
		printf("Interface not supported.\r\n");
	}
}

void delay_ms(uint32_t period)
{
	/* Wait for a period amount of ms*/
}

int8_t i2c_reg_write(void *intf_ptr, uint8_t i2c_addr, uint8_t reg_addr, uint8_t *reg_data, uint16_t length)
{
	/* Write to registers using I2C. Return 0 for a successful execution. */
	return -1;
}

int8_t i2c_reg_read(void *intf_ptr, uint8_t i2c_addr, uint8_t reg_addr, uint8_t *reg_data, uint16_t length)
{
	/* Read from registers using I2C. Return 0 for a successful execution. */
	return -1;
}

int8_t spi_reg_write(void *intf_ptr, uint8_t cs, uint8_t reg_addr, uint8_t *reg_data, uint16_t length)
{
	/* Write to registers using SPI. Return 0 for a successful execution. */
	return -1;
}

int8_t spi_reg_read(void *intf_ptr, uint8_t cs, uint8_t reg_addr, uint8_t *reg_data, uint16_t length)
{
	/* Read from registers using SPI. Return 0 for a successful execution. */
	return -1;
}

void print_rslt(int8_t rslt)
{
	switch (rslt) {
	case BMA400_OK:
		/* Do nothing */
		break;
	case BMA400_E_NULL_PTR:
		printf("Error [%d] : Null pointer\r\n", rslt);
		break;
	case BMA400_E_COM_FAIL:
		printf("Error [%d] : Communication failure\r\n", rslt);
		break;
	case BMA400_E_DEV_NOT_FOUND:
		printf("Error [%d] : Device not found\r\n", rslt);
		break;
	case BMA400_E_INVALID_CONFIG:
		printf("Error [%d] : Invalid configuration\r\n", rslt);
		break;
	case BMA400_W_SELF_TEST_FAIL:
		printf("Warning [%d] : Self test failed\r\n", rslt);
		break;
	default:
		printf("Error [%d] : Unknown error code\r\n", rslt);
		break;
	}
}

float lsb_to_ms2(int16_t val, float g_range, uint8_t bit_width)
{
	float half_scale = (float)(1 << bit_width) / 2.0f;

	return GRAVITY_EARTH * val * g_range / half_scale;
}

float sensor_ticks_to_s(uint32_t sensor_time)
{
	return (float)sensor_time * 0.0000390625f;
}