Release v2.3.7

Include/stm32f030x6.h

@@ -9,22 +9,20 @@
   *          This file contains:
   *           - Data structures and the address mapping for all peripherals
   *           - Peripheral's registers declarations and bits definition
-  *           - Macros to access peripheral’s registers hardware
+  *           - Macros to access peripheral's registers hardware
   *  
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
-
 /** @addtogroup CMSIS
   * @{
   */
@@ -70,7 +68,7 @@ typedef enum
 /******  Cortex-M0 Processor Exceptions Numbers **************************************************************/
   NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                                        */
   HardFault_IRQn              = -13,    /*!< 3 Cortex-M0 Hard Fault Interrupt                                */
-  SVC_IRQn                    = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
+  SVCall_IRQn                 = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
   PendSV_IRQn                 = -2,     /*!< 14 Cortex-M0 Pend SV Interrupt                                  */
   SysTick_IRQn                = -1,     /*!< 15 Cortex-M0 System Tick Interrupt                              */
 
@@ -549,7 +547,7 @@ typedef struct
 /******************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 /* Note: No specific macro feature on this device */
 
@@ -637,7 +635,7 @@ typedef struct
 
 #define ADC_CFGR1_ALIGN_Pos       (5U)                                         
 #define ADC_CFGR1_ALIGN_Msk       (0x1UL << ADC_CFGR1_ALIGN_Pos)                /*!< 0x00000020 */
-#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignement */
+#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignment */
 
 #define ADC_CFGR1_EXTSEL_Pos      (6U)                                         
 #define ADC_CFGR1_EXTSEL_Msk      (0x7UL << ADC_CFGR1_EXTSEL_Pos)               /*!< 0x000001C0 */
@@ -2731,7 +2729,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 
 /********************  Bit definition for RCC_CR register  *******************/
@@ -3290,7 +3288,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 #define RTC_TAMPER1_SUPPORT  /*!< TAMPER 1 feature support */
 #define RTC_TAMPER2_SUPPORT  /*!< TAMPER 2 feature support */
@@ -3750,7 +3748,7 @@ typedef struct
 /*****************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 /* Note: No specific macro feature on this device */
 
@@ -5337,17 +5335,18 @@ typedef struct
 #define ADC1_COMP_IRQn             ADC1_IRQn
 #define DMA1_Ch1_IRQn              DMA1_Channel1_IRQn
 #define DMA1_Ch2_3_DMA2_Ch1_2_IRQn DMA1_Channel2_3_IRQn
-#define DMA1_Channel4_5_6_7_IRQn   DMA1_Channel4_5_IRQn
 #define DMA1_Ch4_7_DMA2_Ch3_5_IRQn DMA1_Channel4_5_IRQn
+#define DMA1_Channel4_5_6_7_IRQn   DMA1_Channel4_5_IRQn
 #define RCC_CRS_IRQn               RCC_IRQn
 
+#define SVC_IRQn                   SVCall_IRQn
 
 /* Aliases for __IRQHandler */
 #define ADC1_COMP_IRQHandler             ADC1_IRQHandler
 #define DMA1_Ch1_IRQHandler              DMA1_Channel1_IRQHandler
 #define DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler DMA1_Channel2_3_IRQHandler
-#define DMA1_Channel4_5_6_7_IRQHandler   DMA1_Channel4_5_IRQHandler
 #define DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler DMA1_Channel4_5_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler   DMA1_Channel4_5_IRQHandler
 #define RCC_CRS_IRQHandler               RCC_IRQHandler
 
 
@@ -5365,4 +5364,3 @@ typedef struct
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Include/stm32f030x8.h

@@ -9,22 +9,20 @@
   *          This file contains:
   *           - Data structures and the address mapping for all peripherals
   *           - Peripheral's registers declarations and bits definition
-  *           - Macros to access peripheral’s registers hardware
+  *           - Macros to access peripheral's registers hardware
   *  
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
-
 /** @addtogroup CMSIS
   * @{
   */
@@ -70,7 +68,7 @@ typedef enum
 /******  Cortex-M0 Processor Exceptions Numbers **************************************************************/
   NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                                        */
   HardFault_IRQn              = -13,    /*!< 3 Cortex-M0 Hard Fault Interrupt                                */
-  SVC_IRQn                    = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
+  SVCall_IRQn                 = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
   PendSV_IRQn                 = -2,     /*!< 14 Cortex-M0 Pend SV Interrupt                                  */
   SysTick_IRQn                = -1,     /*!< 15 Cortex-M0 System Tick Interrupt                              */
 
@@ -565,7 +563,7 @@ typedef struct
 /******************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 /* Note: No specific macro feature on this device */
 
@@ -653,7 +651,7 @@ typedef struct
 
 #define ADC_CFGR1_ALIGN_Pos       (5U)                                         
 #define ADC_CFGR1_ALIGN_Msk       (0x1UL << ADC_CFGR1_ALIGN_Pos)                /*!< 0x00000020 */
-#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignement */
+#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignment */
 
 #define ADC_CFGR1_EXTSEL_Pos      (6U)                                         
 #define ADC_CFGR1_EXTSEL_Msk      (0x7UL << ADC_CFGR1_EXTSEL_Pos)               /*!< 0x000001C0 */
@@ -2761,7 +2759,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 
 /********************  Bit definition for RCC_CR register  *******************/
@@ -3334,7 +3332,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 #define RTC_TAMPER1_SUPPORT  /*!< TAMPER 1 feature support */
 #define RTC_TAMPER2_SUPPORT  /*!< TAMPER 2 feature support */
@@ -3794,7 +3792,7 @@ typedef struct
 /*****************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 /* Note: No specific macro feature on this device */
 
@@ -5402,18 +5400,19 @@ typedef struct
 #define ADC1_COMP_IRQn             ADC1_IRQn
 #define DMA1_Ch1_IRQn              DMA1_Channel1_IRQn
 #define DMA1_Ch2_3_DMA2_Ch1_2_IRQn DMA1_Channel2_3_IRQn
-#define DMA1_Ch4_7_DMA2_Ch3_5_IRQn DMA1_Channel4_5_IRQn
 #define DMA1_Channel4_5_6_7_IRQn   DMA1_Channel4_5_IRQn
+#define DMA1_Ch4_7_DMA2_Ch3_5_IRQn DMA1_Channel4_5_IRQn
 #define RCC_CRS_IRQn               RCC_IRQn
 #define TIM6_DAC_IRQn              TIM6_IRQn
 
+#define SVC_IRQn                   SVCall_IRQn
 
 /* Aliases for __IRQHandler */
 #define ADC1_COMP_IRQHandler             ADC1_IRQHandler
 #define DMA1_Ch1_IRQHandler              DMA1_Channel1_IRQHandler
 #define DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler DMA1_Channel2_3_IRQHandler
-#define DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler DMA1_Channel4_5_IRQHandler
 #define DMA1_Channel4_5_6_7_IRQHandler   DMA1_Channel4_5_IRQHandler
+#define DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler DMA1_Channel4_5_IRQHandler
 #define RCC_CRS_IRQHandler               RCC_IRQHandler
 #define TIM6_DAC_IRQHandler              TIM6_IRQHandler
 
@@ -5432,4 +5431,3 @@ typedef struct
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Include/stm32f030xc.h

@@ -9,22 +9,20 @@
   *          This file contains:
   *           - Data structures and the address mapping for all peripherals
   *           - Peripheral's registers declarations and bits definition
-  *           - Macros to access peripheral’s registers hardware
+  *           - Macros to access peripheral's registers hardware
   *  
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
-
 /** @addtogroup CMSIS
   * @{
   */
@@ -70,7 +68,7 @@ typedef enum
 /******  Cortex-M0 Processor Exceptions Numbers **************************************************************/
   NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                                        */
   HardFault_IRQn              = -13,    /*!< 3 Cortex-M0 Hard Fault Interrupt                                */
-  SVC_IRQn                    = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
+  SVCall_IRQn                 = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
   PendSV_IRQn                 = -2,     /*!< 14 Cortex-M0 Pend SV Interrupt                                  */
   SysTick_IRQn                = -1,     /*!< 15 Cortex-M0 System Tick Interrupt                              */
 
@@ -581,7 +579,7 @@ typedef struct
 /******************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 /* Note: No specific macro feature on this device */
 
@@ -669,7 +667,7 @@ typedef struct
 
 #define ADC_CFGR1_ALIGN_Pos       (5U)                                         
 #define ADC_CFGR1_ALIGN_Msk       (0x1UL << ADC_CFGR1_ALIGN_Pos)                /*!< 0x00000020 */
-#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignement */
+#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignment */
 
 #define ADC_CFGR1_EXTSEL_Pos      (6U)                                         
 #define ADC_CFGR1_EXTSEL_Msk      (0x7UL << ADC_CFGR1_EXTSEL_Pos)               /*!< 0x000001C0 */
@@ -3024,7 +3022,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 #define RCC_PLLSRC_PREDIV1_SUPPORT  /*!< PREDIV support used as PLL source input  */
 
@@ -3140,8 +3138,8 @@ typedef struct
 #define RCC_CFGR_PPRE_DIV16_Msk                  (0x7UL << RCC_CFGR_PPRE_DIV16_Pos) /*!< 0x00000700 */
 #define RCC_CFGR_PPRE_DIV16                      RCC_CFGR_PPRE_DIV16_Msk       /*!< HCLK divided by 16 */
 
-#define RCC_CFGR_PLLSRC_Pos                      (16U)                         
-#define RCC_CFGR_PLLSRC_Msk                      (0x1UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */
+#define RCC_CFGR_PLLSRC_Pos                      (15U)
+#define RCC_CFGR_PLLSRC_Msk                      (0x3UL << RCC_CFGR_PLLSRC_Pos) /*!< 0x00018000 */
 #define RCC_CFGR_PLLSRC                          RCC_CFGR_PLLSRC_Msk           /*!< PLL entry clock source */
 #define RCC_CFGR_PLLSRC_HSI_DIV2                 (0x00000000U)                 /*!< HSI clock divided by 2 selected as PLL entry clock source */
 #define RCC_CFGR_PLLSRC_HSI_PREDIV               (0x00008000U)                 /*!< HSI/PREDIV clock selected as PLL entry clock source */
@@ -3636,7 +3634,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 #define RTC_TAMPER1_SUPPORT  /*!< TAMPER 1 feature support */
 #define RTC_TAMPER2_SUPPORT  /*!< TAMPER 2 feature support */
@@ -4120,7 +4118,7 @@ typedef struct
 /*****************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 /* Note: No specific macro feature on this device */
 
@@ -5092,7 +5090,7 @@ typedef struct
 /******************************************************************************/
 
 /*
-* @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
 */
 
 /* Support of 7 bits data length feature */
@@ -5784,6 +5782,7 @@ typedef struct
 #define USART3_8_IRQn              USART3_6_IRQn
 #define USART3_4_IRQn              USART3_6_IRQn
 
+#define SVC_IRQn                   SVCall_IRQn
 
 /* Aliases for __IRQHandler */
 #define ADC1_COMP_IRQHandler             ADC1_IRQHandler
@@ -5811,4 +5810,3 @@ typedef struct
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Include/stm32f031x6.h

@@ -9,22 +9,20 @@
   *          This file contains:
   *           - Data structures and the address mapping for all peripherals
   *           - Peripheral's registers declarations and bits definition
-  *           - Macros to access peripheral’s registers hardware
+  *           - Macros to access peripheral's registers hardware
   *  
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
-
 /** @addtogroup CMSIS
   * @{
   */
@@ -70,7 +68,7 @@ typedef enum
 /******  Cortex-M0 Processor Exceptions Numbers **************************************************************/
   NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                                        */
   HardFault_IRQn              = -13,    /*!< 3 Cortex-M0 Hard Fault Interrupt                                */
-  SVC_IRQn                    = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
+  SVCall_IRQn                 = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
   PendSV_IRQn                 = -2,     /*!< 14 Cortex-M0 Pend SV Interrupt                                  */
   SysTick_IRQn                = -1,     /*!< 15 Cortex-M0 System Tick Interrupt                              */
 
@@ -559,7 +557,7 @@ typedef struct
 /******************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 #define ADC_CHANNEL_VBAT_SUPPORT                       /*!< ADC feature available only on specific devices: ADC internal channel Vbat */
 
@@ -647,7 +645,7 @@ typedef struct
 
 #define ADC_CFGR1_ALIGN_Pos       (5U)                                         
 #define ADC_CFGR1_ALIGN_Msk       (0x1UL << ADC_CFGR1_ALIGN_Pos)                /*!< 0x00000020 */
-#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignement */
+#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignment */
 
 #define ADC_CFGR1_EXTSEL_Pos      (6U)                                         
 #define ADC_CFGR1_EXTSEL_Msk      (0x7UL << ADC_CFGR1_EXTSEL_Pos)               /*!< 0x000001C0 */
@@ -2857,7 +2855,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 
 /********************  Bit definition for RCC_CR register  *******************/
@@ -3416,7 +3414,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 #define RTC_TAMPER1_SUPPORT  /*!< TAMPER 1 feature support */
 #define RTC_TAMPER2_SUPPORT  /*!< TAMPER 2 feature support */
@@ -3905,7 +3903,7 @@ typedef struct
 /*****************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 #define SPI_I2S_SUPPORT                       /*!< I2S support */
 
@@ -4926,7 +4924,7 @@ typedef struct
 /******************************************************************************/
 
 /*
-* @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
 */
 
 /* Support of LIN feature */
@@ -5659,21 +5657,22 @@ typedef struct
 #define ADC1_COMP_IRQn             ADC1_IRQn
 #define DMA1_Ch1_IRQn              DMA1_Channel1_IRQn
 #define DMA1_Ch2_3_DMA2_Ch1_2_IRQn DMA1_Channel2_3_IRQn
-#define DMA1_Channel4_5_6_7_IRQn   DMA1_Channel4_5_IRQn
 #define DMA1_Ch4_7_DMA2_Ch3_5_IRQn DMA1_Channel4_5_IRQn
-#define PVD_VDDIO2_IRQn            PVD_IRQn
+#define DMA1_Channel4_5_6_7_IRQn   DMA1_Channel4_5_IRQn
 #define VDDIO2_IRQn                PVD_IRQn
+#define PVD_VDDIO2_IRQn            PVD_IRQn
 #define RCC_CRS_IRQn               RCC_IRQn
 
+#define SVC_IRQn                   SVCall_IRQn
 
 /* Aliases for __IRQHandler */
 #define ADC1_COMP_IRQHandler             ADC1_IRQHandler
 #define DMA1_Ch1_IRQHandler              DMA1_Channel1_IRQHandler
 #define DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler DMA1_Channel2_3_IRQHandler
-#define DMA1_Channel4_5_6_7_IRQHandler   DMA1_Channel4_5_IRQHandler
 #define DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler DMA1_Channel4_5_IRQHandler
-#define PVD_VDDIO2_IRQHandler            PVD_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler   DMA1_Channel4_5_IRQHandler
 #define VDDIO2_IRQHandler                PVD_IRQHandler
+#define PVD_VDDIO2_IRQHandler            PVD_IRQHandler
 #define RCC_CRS_IRQHandler               RCC_IRQHandler
 
 
@@ -5691,4 +5690,3 @@ typedef struct
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Include/stm32f038xx.h

@@ -9,22 +9,20 @@
   *          This file contains:
   *           - Data structures and the address mapping for all peripherals
   *           - Peripheral's registers declarations and bits definition
-  *           - Macros to access peripheral’s registers hardware
+  *           - Macros to access peripheral's registers hardware
   *  
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
-
 /** @addtogroup CMSIS
   * @{
   */
@@ -70,7 +68,7 @@ typedef enum
 /******  Cortex-M0 Processor Exceptions Numbers **************************************************************/
   NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                                        */
   HardFault_IRQn              = -13,    /*!< 3 Cortex-M0 Hard Fault Interrupt                                */
-  SVC_IRQn                    = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
+  SVCall_IRQn                 = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
   PendSV_IRQn                 = -2,     /*!< 14 Cortex-M0 Pend SV Interrupt                                  */
   SysTick_IRQn                = -1,     /*!< 15 Cortex-M0 System Tick Interrupt                              */
 
@@ -558,7 +556,7 @@ typedef struct
 /******************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 #define ADC_CHANNEL_VBAT_SUPPORT                       /*!< ADC feature available only on specific devices: ADC internal channel Vbat */
 
@@ -646,7 +644,7 @@ typedef struct
 
 #define ADC_CFGR1_ALIGN_Pos       (5U)                                         
 #define ADC_CFGR1_ALIGN_Msk       (0x1UL << ADC_CFGR1_ALIGN_Pos)                /*!< 0x00000020 */
-#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignement */
+#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignment */
 
 #define ADC_CFGR1_EXTSEL_Pos      (6U)                                         
 #define ADC_CFGR1_EXTSEL_Msk      (0x7UL << ADC_CFGR1_EXTSEL_Pos)               /*!< 0x000001C0 */
@@ -2832,7 +2830,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 
 /********************  Bit definition for RCC_CR register  *******************/
@@ -3388,7 +3386,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 #define RTC_TAMPER1_SUPPORT  /*!< TAMPER 1 feature support */
 #define RTC_TAMPER2_SUPPORT  /*!< TAMPER 2 feature support */
@@ -3877,7 +3875,7 @@ typedef struct
 /*****************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 #define SPI_I2S_SUPPORT                       /*!< I2S support */
 
@@ -4895,7 +4893,7 @@ typedef struct
 /******************************************************************************/
 
 /*
-* @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
 */
 
 /* Support of LIN feature */
@@ -5632,6 +5630,7 @@ typedef struct
 #define DMA1_Channel4_5_6_7_IRQn   DMA1_Channel4_5_IRQn
 #define RCC_CRS_IRQn               RCC_IRQn
 
+#define SVC_IRQn                   SVCall_IRQn
 
 /* Aliases for __IRQHandler */
 #define ADC1_COMP_IRQHandler             ADC1_IRQHandler
@@ -5656,4 +5655,3 @@ typedef struct
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Include/stm32f070x6.h

@@ -9,22 +9,20 @@
   *          This file contains:
   *           - Data structures and the address mapping for all peripherals
   *           - Peripheral's registers declarations and bits definition
-  *           - Macros to access peripheral’s registers hardware
+  *           - Macros to access peripheral's registers hardware
   *  
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
-
 /** @addtogroup CMSIS
   * @{
   */
@@ -70,7 +68,7 @@ typedef enum
 /******  Cortex-M0 Processor Exceptions Numbers **************************************************************/
   NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                                        */
   HardFault_IRQn              = -13,    /*!< 3 Cortex-M0 Hard Fault Interrupt                                */
-  SVC_IRQn                    = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
+  SVCall_IRQn                 = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
   PendSV_IRQn                 = -2,     /*!< 14 Cortex-M0 Pend SV Interrupt                                  */
   SysTick_IRQn                = -1,     /*!< 15 Cortex-M0 System Tick Interrupt                              */
 
@@ -594,7 +592,7 @@ typedef struct
 /******************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 /* Note: No specific macro feature on this device */
 
@@ -682,7 +680,7 @@ typedef struct
 
 #define ADC_CFGR1_ALIGN_Pos       (5U)                                         
 #define ADC_CFGR1_ALIGN_Msk       (0x1UL << ADC_CFGR1_ALIGN_Pos)                /*!< 0x00000020 */
-#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignement */
+#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignment */
 
 #define ADC_CFGR1_EXTSEL_Pos      (6U)                                         
 #define ADC_CFGR1_EXTSEL_Msk      (0x7UL << ADC_CFGR1_EXTSEL_Pos)               /*!< 0x000001C0 */
@@ -2784,7 +2782,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 #define RCC_PLLSRC_PREDIV1_SUPPORT  /*!< PREDIV support used as PLL source input  */
 
@@ -3370,7 +3368,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 #define RTC_TAMPER1_SUPPORT  /*!< TAMPER 1 feature support */
 #define RTC_TAMPER2_SUPPORT  /*!< TAMPER 2 feature support */
@@ -3830,7 +3828,7 @@ typedef struct
 /*****************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 /* Note: No specific macro feature on this device */
 
@@ -4807,7 +4805,7 @@ typedef struct
 /******************************************************************************/
 
 /*
-* @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
 */
 
 /* Support of 7 bits data length feature */
@@ -5593,6 +5591,7 @@ typedef struct
 #define DMA1_Ch4_7_DMA2_Ch3_5_IRQn DMA1_Channel4_5_IRQn
 #define RCC_CRS_IRQn               RCC_IRQn
 
+#define SVC_IRQn                   SVCall_IRQn
 
 /* Aliases for __IRQHandler */
 #define ADC1_COMP_IRQHandler             ADC1_IRQHandler
@@ -5617,4 +5616,3 @@ typedef struct
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Include/stm32f070xb.h

@@ -9,22 +9,20 @@
   *          This file contains:
   *           - Data structures and the address mapping for all peripherals
   *           - Peripheral's registers declarations and bits definition
-  *           - Macros to access peripheral’s registers hardware
+  *           - Macros to access peripheral's registers hardware
   *  
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
-
 /** @addtogroup CMSIS
   * @{
   */
@@ -70,7 +68,7 @@ typedef enum
 /******  Cortex-M0 Processor Exceptions Numbers **************************************************************/
   NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                                        */
   HardFault_IRQn              = -13,    /*!< 3 Cortex-M0 Hard Fault Interrupt                                */
-  SVC_IRQn                    = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
+  SVCall_IRQn                 = -5,     /*!< 11 Cortex-M0 SV Call Interrupt                                  */
   PendSV_IRQn                 = -2,     /*!< 14 Cortex-M0 Pend SV Interrupt                                  */
   SysTick_IRQn                = -1,     /*!< 15 Cortex-M0 System Tick Interrupt                              */
 
@@ -617,7 +615,7 @@ typedef struct
 /******************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 /* Note: No specific macro feature on this device */
 
@@ -705,7 +703,7 @@ typedef struct
 
 #define ADC_CFGR1_ALIGN_Pos       (5U)                                         
 #define ADC_CFGR1_ALIGN_Msk       (0x1UL << ADC_CFGR1_ALIGN_Pos)                /*!< 0x00000020 */
-#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignement */
+#define ADC_CFGR1_ALIGN           ADC_CFGR1_ALIGN_Msk                          /*!< ADC data alignment */
 
 #define ADC_CFGR1_EXTSEL_Pos      (6U)                                         
 #define ADC_CFGR1_EXTSEL_Msk      (0x7UL << ADC_CFGR1_EXTSEL_Pos)               /*!< 0x000001C0 */
@@ -2876,7 +2874,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 #define RCC_PLLSRC_PREDIV1_SUPPORT  /*!< PREDIV support used as PLL source input  */
 
@@ -3504,7 +3502,7 @@ typedef struct
 /*                                                                           */
 /*****************************************************************************/
 /*
-* @brief Specific device feature definitions  (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions  (not present on all devices in the STM32F0 series)
 */
 #define RTC_TAMPER1_SUPPORT  /*!< TAMPER 1 feature support */
 #define RTC_TAMPER2_SUPPORT  /*!< TAMPER 2 feature support */
@@ -3988,7 +3986,7 @@ typedef struct
 /*****************************************************************************/
 
 /*
- * @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+ * @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
  */
 /* Note: No specific macro feature on this device */
 
@@ -4959,7 +4957,7 @@ typedef struct
 /******************************************************************************/
 
 /*
-* @brief Specific device feature definitions (not present on all devices in the STM32F0 serie)
+* @brief Specific device feature definitions (not present on all devices in the STM32F0 series)
 */
 
 /* Support of 7 bits data length feature */
@@ -5769,24 +5767,25 @@ typedef struct
 #define ADC1_COMP_IRQn             ADC1_IRQn
 #define DMA1_Ch1_IRQn              DMA1_Channel1_IRQn
 #define DMA1_Ch2_3_DMA2_Ch1_2_IRQn DMA1_Channel2_3_IRQn
-#define DMA1_Ch4_7_DMA2_Ch3_5_IRQn DMA1_Channel4_5_IRQn
 #define DMA1_Channel4_5_6_7_IRQn   DMA1_Channel4_5_IRQn
+#define DMA1_Ch4_7_DMA2_Ch3_5_IRQn DMA1_Channel4_5_IRQn
 #define RCC_CRS_IRQn               RCC_IRQn
 #define TIM6_DAC_IRQn              TIM6_IRQn
-#define USART3_8_IRQn              USART3_4_IRQn
 #define USART3_6_IRQn              USART3_4_IRQn
+#define USART3_8_IRQn              USART3_4_IRQn
 
+#define SVC_IRQn                   SVCall_IRQn
 
 /* Aliases for __IRQHandler */
 #define ADC1_COMP_IRQHandler             ADC1_IRQHandler
 #define DMA1_Ch1_IRQHandler              DMA1_Channel1_IRQHandler
 #define DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler DMA1_Channel2_3_IRQHandler
-#define DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler DMA1_Channel4_5_IRQHandler
 #define DMA1_Channel4_5_6_7_IRQHandler   DMA1_Channel4_5_IRQHandler
+#define DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler DMA1_Channel4_5_IRQHandler
 #define RCC_CRS_IRQHandler               RCC_IRQHandler
 #define TIM6_DAC_IRQHandler              TIM6_IRQHandler
-#define USART3_8_IRQHandler              USART3_4_IRQHandler
 #define USART3_6_IRQHandler              USART3_4_IRQHandler
+#define USART3_8_IRQHandler              USART3_4_IRQHandler
 
 
 #ifdef __cplusplus
@@ -5803,4 +5802,3 @@ typedef struct
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Include/stm32f0xx.h

@@ -8,25 +8,23 @@
   *          is using in the C source code, usually in main.c. This file contains:
   *           - Configuration section that allows to select:
   *              - The STM32F0xx device used in the target application
-  *              - To use or not the peripheral’s drivers in application code(i.e. 
-  *                code will be based on direct access to peripheral’s registers 
+  *              - To use or not the peripheral's drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral's registers 
   *                rather than drivers API), this option is controlled by 
   *                "#define USE_HAL_DRIVER"
   *  
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
-
 /** @addtogroup CMSIS
   * @{
   */
@@ -59,8 +57,8 @@
   * - IRQ channel definition
   * - Peripheral memory mapping and physical registers address definition
   * - Peripheral pointer declaration and driver header file inclusion
-  * - Product miscellaneous configuration: assert macros…
-  * Note: These CMSIS drivers (stm32f0xxxx.h) are always supporting features of the sub-family’s superset.
+  * - Product miscellaneous configuration: assert macros, …
+  * Note: These CMSIS drivers (stm32f0xxxx.h) are always supporting features of the sub-family's superset.
   */
 
 #if !defined (STM32F030x6) && !defined (STM32F030x8) &&                           \
@@ -104,11 +102,11 @@
 #endif /* USE_HAL_DRIVER */
 
 /**
-  * @brief CMSIS Device version number V2.3.6
+  * @brief CMSIS Device version number V2.3.7
   */
 #define __STM32F0_DEVICE_VERSION_MAIN   (0x02) /*!< [31:24] main version */
 #define __STM32F0_DEVICE_VERSION_SUB1   (0x03) /*!< [23:16] sub1 version */
-#define __STM32F0_DEVICE_VERSION_SUB2   (0x06) /*!< [15:8]  sub2 version */
+#define __STM32F0_DEVICE_VERSION_SUB2   (0x07) /*!< [15:8]  sub2 version */
 #define __STM32F0_DEVICE_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
 #define __STM32F0_DEVICE_VERSION        ((__STM32F0_DEVICE_VERSION_MAIN << 24)\
                                         |(__STM32F0_DEVICE_VERSION_SUB1 << 16)\
@@ -268,8 +266,4 @@ typedef enum
 /**
   * @}
   */
-  
-
-
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Include/system_stm32f0xx.h

@@ -6,17 +6,15 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
-
 /** @addtogroup CMSIS
   * @{
   */
@@ -101,5 +99,5 @@ extern void SystemCoreClockUpdate(void);
   
 /**
   * @}
-  */  
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+  */
+

LICENSE.md

@@ -1,190 +1,72 @@
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
-   APPENDIX: How to apply the Apache License to your work.
-
-      To apply the Apache License to your work, attach the following
-      boilerplate notice, with the fields enclosed by brackets "[]"
-      replaced with your own identifying information. (Don't include
-      the brackets!)  The text should be enclosed in the appropriate
-      comment syntax for the file format. We also recommend that a
-      file or class name and description of purpose be included on the
-      same "printed page" as the copyright notice for easier
-      identification within third-party archives.
+Apache License
+ Version 2.0, January 2004
+ http://www.apache.org/licenses/
+
+TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+1. Definitions.
+
+"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.
+
+"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
+
+"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.
+
+"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.
+
+"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
+
+"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.
+
+"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).
+
+"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.
+
+"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."
+
+"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.
+
+2. Grant of Copyright License.
+
+Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
+
+3. Grant of Patent License.
+
+Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
+
+4. Redistribution.
+
+You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:
+1.You must give any other recipients of the Work or Derivative Works a copy of this License; and
+2.You must cause any modified files to carry prominent notices stating that You changed the files; and
+3.You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
+4.If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.
+
+You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.
+
+5. Submission of Contributions.
+
+Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.
+
+6. Trademarks.
+
+This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
+
+7. Disclaimer of Warranty.
+
+Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
+
+8. Limitation of Liability.
+
+In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
+
+9. Accepting Warranty or Additional Liability.
+
+While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.
+
+END OF TERMS AND CONDITIONS
+
+APPENDIX:
 
    Copyright [2019] [STMicroelectronics]
 
@@ -192,7 +74,7 @@
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
 
-       http://www.apache.org/licenses/LICENSE-2.0
+     http://www.apache.org/licenses/LICENSE-2.0
 
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,

Release_Notes.html

@@ -5,14 +5,11 @@
   <meta name="generator" content="pandoc" />
   <meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
   <title>Release Notes for STM32F0xx CMSIS</title>
-  <style>
-    code{white-space: pre-wrap;}
-    span.smallcaps{font-variant: small-caps;}
-    span.underline{text-decoration: underline;}
-    div.column{display: inline-block; vertical-align: top; width: 50%;}
-    div.hanging-indent{margin-left: 1.5em; text-indent: -1.5em;}
-    ul.task-list{list-style: none;}
-    .display.math{display: block; text-align: center; margin: 0.5rem auto;}
+  <style type="text/css">
+      code{white-space: pre-wrap;}
+      span.smallcaps{font-variant: small-caps;}
+      span.underline{text-decoration: underline;}
+      div.column{display: inline-block; vertical-align: top; width: 50%;}
   </style>
   <link rel="stylesheet" href="_htmresc/mini-st.css" />
   <!--[if lt IE 9]>
@@ -32,20 +29,36 @@
 </center>
 </div>
 </div>
-<h1 id="license"><strong>License</strong></h1>
-This software component is licensed by ST under BSD 3-Clause license, the “License”; You may not use this component except in compliance with the License. You may obtain a copy of the License at:
-<center>
-<a href="https://opensource.org/licenses/BSD-3-Clause">https://opensource.org/licenses/BSD-3-Clause</a>
-</center>
 </div>
-<section id="update-history" class="col-sm-12 col-lg-8">
-<h1><strong>Update History</strong></h1>
+<div class="col-sm-12 col-lg-8">
+<h1 id="update-history"><strong>Update History</strong></h1>
 <div class="collapse">
-<input type="checkbox" id="collapse-section2_3_6" aria-hidden="true"> <label for="collapse-section2_3_6" aria-hidden="true"><strong>V2.3.6 / 23-July-2021</strong></label>
+<input type="checkbox" id="collapse-section2_3_7" checked aria-hidden="true"> <label for="collapse-section2_3_7" aria-hidden="true"><strong>V2.3.7/ 27-January-2023</strong></label>
+<div>
 <h2 id="main-changes">Main Changes</h2>
 <ul>
 <li>General updates
 <ul>
+<li>All source files: update disclaimer to add reference to the new license agreement.</li>
+<li>Update GCC startup files to call SystemInit() API in beginning of Reset_Handler() API to be aligned with IAR/MDK-ARM implementation.</li>
+<li>Fix inconsistent IRQn_Type enumeration for supervisor call exception with alias for compatibility</li>
+<li>Add support for HSI48 in SystemCoreClockUpdate.</li>
+<li>stm32f030xc.h header file update:
+<ul>
+<li>Revert change done in V2.3.5 on RCC_CFGR bits definition.</li>
+<li>RCC_CFGR bits description will be updated in documentation: RM0360.</li>
+</ul></li>
+</ul></li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section2_3_6" aria-hidden="true"> <label for="collapse-section2_3_6" aria-hidden="true"><strong>V2.3.6 / 23-July-2021</strong></label>
+<div>
+<h2 id="main-changes-1">Main Changes</h2>
+<ul>
+<li>General updates
+<ul>
 <li>CAN updates
 <ul>
 <li>Remove extra CAN filters: bit fields 14..27</li>
@@ -55,9 +68,11 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
 </ul></li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section2_3_5" aria-hidden="true"> <label for="collapse-section2_3_5" aria-hidden="true"><strong>V2.3.5 / 06-November-2020</strong></label>
-<h2 id="main-changes-1">Main Changes</h2>
+<div>
+<h2 id="main-changes-2">Main Changes</h2>
 <ul>
 <li>General updates
 <ul>
@@ -67,51 +82,61 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
 </ul></li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section2_3_4" aria-hidden="true"> <label for="collapse-section2_3_4" aria-hidden="true"><strong>V2.3.4 / 12-September-2019</strong></label>
-<h2 id="main-changes-2">Main Changes</h2>
+<div>
+<h2 id="main-changes-3">Main Changes</h2>
 <ul>
 <li>General updates
 <ul>
 <li>Align ErrorStatus typedef to common error handling (stm32f0xx.h)</li>
 <li>SystemInit(): update to don’t reset RCC registers to its reset values.</li>
-<li>USE UL postfix for _Msk definitions and momory/peripheral base addresses for MISRA C 2012 Compliance</li>
+<li>USE UL postfix for _Msk definitions and memory/peripheral base addresses for MISRA C 2012 Compliance</li>
 </ul></li>
 <li>Rename macro definition IS_USB_ALL_INSTANCE to IS_PCD_ALL_INSTANCE.</li>
 <li>Add macro definition IS_GPIO_AF_INSTANCE for stm32f030xc devices</li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section2_3_3" aria-hidden="true"> <label for="collapse-section2_3_3" aria-hidden="true"><strong>V2.3.3 / 25-August-2017</strong></label>
-<h2 id="main-changes-3">Main Changes</h2>
+<div>
+<h2 id="main-changes-4">Main Changes</h2>
 <ul>
 <li>Remove support of Atollic TrueSTUDIO STM32 (TrueSTUDIO) toolchain.</li>
 <li>Performance improvement of the startup code for GCC.</li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section2_3_2" aria-hidden="true"> <label for="collapse-section2_3_2" aria-hidden="true"><strong>V2.3.2 / 07-April-2017</strong></label>
-<h2 id="main-changes-4">Main Changes</h2>
+<div>
+<h2 id="main-changes-5">Main Changes</h2>
 <ul>
 <li>Rename GPIO_AFRH and GPIO_AFRL bitfields for alignment with all STM32 series.</li>
 <li>Add macro definition : IS_TIM_ADVANCED.</li>
 <li>Rename RTC_CR register bit definition to be aligned with STM32F0xx Reference Manual : RTC_CR_BCK ==&gt; RTC_CR_BKP</li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section2_3_1" aria-hidden="true"> <label for="collapse-section2_3_1" aria-hidden="true"><strong>V2.3.1 / 04-November-2016</strong></label>
-<h2 id="main-changes-5">Main Changes</h2>
+<div>
+<h2 id="main-changes-6">Main Changes</h2>
 <ul>
 <li>Add TIM6_IRQHandler in vectors table for STM32F030x8 devices</li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section2_3_0" aria-hidden="true"> <label for="collapse-section2_3_0" aria-hidden="true"><strong>V2.3.0 / 27-May-2016</strong></label>
-<h2 id="main-changes-6">Main Changes</h2>
+<div>
+<h2 id="main-changes-7">Main Changes</h2>
 <ul>
 <li>General updates
 <ul>
-<li>Updated CMSIS Device compliancy with MISRA C 2004 rules:
+<li>Updated CMSIS Device compliance with MISRA C 2004 rules:
 <ul>
 <li>MISRA C 2004 rule 10.5 (bitwise operators ~ and &lt;&lt;).</li>
 <li>MISRA C 2004 rule 10.6 (‘U’ suffix applied to all constants of ‘unsigned’ type).</li>
@@ -161,19 +186,21 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
 </ul></li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section2_2_3" aria-hidden="true"> <label for="collapse-section2_2_3" aria-hidden="true"><strong>V2.2.3 / 29-January-2016</strong></label>
-<h2 id="main-changes-7">Main Changes</h2>
+<div>
+<h2 id="main-changes-8">Main Changes</h2>
 <ul>
 <li>Added mention to STM32F091xB mcus missing in the list of mcus of stm32f0xx.h.</li>
-<li>Updated CMSIS Device compliancy with MISRA C 2004 rule 10.6.</li>
-<li>Updated CMSIS Device compliancy with MISRA C 2004 rule 5.1.</li>
+<li>Updated CMSIS Device compliance with MISRA C 2004 rule 10.6.</li>
+<li>Updated CMSIS Device compliance with MISRA C 2004 rule 5.1.</li>
 <li>Added HSI48_VALUE definition in system_stm32f0xx.c file.</li>
 <li>Put variable AHBPrescTable as external in system_stm32f0xx.h.</li>
 <li>Added channel selection bit definitions for for DMA1_CSELR register.</li>
 <li>Used RCC_CFGR_MCOSEL as reference in all the families.</li>
 <li>Renamed RCC_CFGR_MCOSEL_PLL to RCC_CFGR_MCOSEL_PLL_DIV2 for alignment between all families.</li>
-<li>Updated EWUPx pins defintions for STM32F042x6 and STM32F048xx devices.</li>
+<li>Updated EWUPx pins definitions for STM32F042x6 and STM32F048xx devices.</li>
 <li>Added FLASHSIZE_BASE and UID_BASE defines.</li>
 <li>Added missing bits definition for RTC_TAFCR register.</li>
 <li>Added missing bits definition for I2C_OAR2 register (I2C_OAR2 mask values).</li>
@@ -198,9 +225,11 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
 <li>Removed HW Flow Control support on USART5/6/7/8 for STM32F091xC.</li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section2_2_2" aria-hidden="true"> <label for="collapse-section2_2_2" aria-hidden="true"><strong>V2.2.2 / 26-June-2015</strong></label>
-<h2 id="main-changes-8">Main Changes</h2>
+<div>
+<h2 id="main-changes-9">Main Changes</h2>
 <ul>
 <li>Add missing WUT bits in EXTI_IMR/EMR/RTSR/FTSR/PR/SWIER for different IT lines.</li>
 <li>Add preprocessor compilation switch #define STM32F0 in stm32f0xx.h.</li>
@@ -213,9 +242,11 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
 <li>Add FLASH_OBR_RAM_PARITY_CHECK and FLASH_OBR_BOOT_SEL CMSIS files.</li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section2_2_1" aria-hidden="true"> <label for="collapse-section2_2_1" aria-hidden="true"><strong>V2.2.1 / 09-January-2015</strong></label>
-<h2 id="main-changes-9">Main Changes</h2>
+<div>
+<h2 id="main-changes-10">Main Changes</h2>
 <ul>
 <li>system_stm32f0xx.c: replace wrong compilation switch STM32F078xB by STM32F078xx.</li>
 <li>stm32F070xb.h: correct wrong DMA remap mask value for STM32f070xB.</li>
@@ -223,34 +254,40 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
 <li>stm32F070xb.h, stm32F030xc.h: add missing RTC periodic Wakeup register &amp; bits description</li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section2_2_0" aria-hidden="true"> <label for="collapse-section2_2_0" aria-hidden="true"><strong>V2.2.0 / 05-December-2014</strong></label>
-<h2 id="main-changes-10">Main Changes</h2>
+<div>
+<h2 id="main-changes-11">Main Changes</h2>
 <ul>
 <li>Add CMSIS files for new STM32F0 value line devices: STM32F030xC and STM32F070x6/xB.</li>
 <li>Add macro to check AF capability of gpio instance</li>
-<li>uint32_t alignement done on all Peripheral registers structures &amp; bits definition</li>
+<li>uint32_t alignment done on all Peripheral registers structures &amp; bits definition</li>
 <li>stm32f091xc.h: DMA channel remap register renamed for compatibility with other STM32 devices</li>
 <li>startup_stm32f042x6.s &amp; startup_stm32f070x6.s: fix boot issue</li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section2_1_0" aria-hidden="true"> <label for="collapse-section2_1_0" aria-hidden="true"><strong>V2.1.0 / 03-October-2014</strong></label>
-<h2 id="main-changes-11">Main Changes</h2>
+<div>
+<h2 id="main-changes-12">Main Changes</h2>
 <ul>
 <li>Add new CMSIS files for STM32F091xc and STM32F098xx products</li>
 <li>VDDIO2 IRQ missing in F07xx/F09xx/F04xx product</li>
 <li>IS_DAC_CHANNEL_INSTANCE macro removed as unused</li>
-<li>uint32_t partial alignement done on peripheral Bit definition &amp; register structure</li>
+<li>uint32_t partial alignment done on peripheral Bit definition &amp; register structure</li>
 <li>Bit definition name error for DMA_RMPCR1 register of STM32F091xC</li>
 <li>Remove PDV feature on REGoff part</li>
 <li>Remove POSITION_VAL macro as it uses RBIT, CLZ instructions, that are not supported by Cortex-M0</li>
-<li>GPIOS BSRR regsiter should not be split in BSRRH/BSRRL</li>
+<li>GPIOS BSRR register should not be split in BSRRH/BSRRL</li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section2_0_1" aria-hidden="true"> <label for="collapse-section2_0_1" aria-hidden="true"><strong>V2.0.1 / 18-June-2014</strong></label>
-<h2 id="main-changes-12">Main Changes</h2>
+<div>
+<h2 id="main-changes-13">Main Changes</h2>
 <ul>
 <li>General
 <ul>
@@ -281,17 +318,21 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
 </ul></li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section2_0_0" aria-hidden="true"> <label for="collapse-section2_0_0" aria-hidden="true"><strong>V2.0.0 / 28-May-2014</strong></label>
-<h2 id="main-changes-13">Main Changes</h2>
+<div>
+<h2 id="main-changes-14">Main Changes</h2>
 <ul>
 <li>Major update based on STM32Cube specification: new CMSIS device files release dedicated to <strong>STM32F030x4/x6, STM32F030x8, STM32F031x4/x6, STM32F051x4/x6/x8, STM32F071x8/xB, STM32F042x4/x6, STM32F072x8/xB, STM32F038xx, STM32F048xx, STM32F058xx and STM32F078xx devices</strong>.</li>
 <li><strong>This version has to be used for STM32CubeF0 based development although files can be used independently too</strong>.</li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section1_2_1" aria-hidden="true"> <label for="collapse-section1_2_1" aria-hidden="true"><strong>V1.2.1 / 22-November-2013</strong></label>
-<h2 id="main-changes-14">Main Changes</h2>
+<div>
+<h2 id="main-changes-15">Main Changes</h2>
 <ul>
 <li>stm32f0xx.h
 <ul>
@@ -308,9 +349,11 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
 <li>Remove the startup files startup_stm32f030x8.s and startup_stm32f030x6.s and replace them by startup_stm32f030.s, for EWARM, MDK-ARM and Truestudio supported compilers</li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section1_2_0" aria-hidden="true"> <label for="collapse-section1_2_0" aria-hidden="true"><strong>V1.2.0 / 01-August-2013</strong></label>
-<h2 id="main-changes-15">Main Changes</h2>
+<div>
+<h2 id="main-changes-16">Main Changes</h2>
 <ul>
 <li>Add support of STM32F030 devices (STM32F030x8 and STM32F030x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes)</li>
 <li>stm32f0xx.h
@@ -323,9 +366,11 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
 </ul></li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section1_1_1" aria-hidden="true"> <label for="collapse-section1_1_1" aria-hidden="true"><strong>V1.1.1 / 31-July-2013</strong></label>
-<h2 id="main-changes-16">Main Changes</h2>
+<div>
+<h2 id="main-changes-17">Main Changes</h2>
 <ul>
 <li>stm32f0xx.h
 <ul>
@@ -333,9 +378,11 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
 </ul></li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section1_1_0" aria-hidden="true"> <label for="collapse-section1_1_0" aria-hidden="true"><strong>V1.1.0 / 10-May-2013</strong></label>
-<h2 id="main-changes-17">Main Changes</h2>
+<div>
+<h2 id="main-changes-18">Main Changes</h2>
 <ul>
 <li>Add support of STM32F0xx Low-density devices (STM32F050xx and STM32F060xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes)</li>
 <li>stm32f0xx.h
@@ -359,9 +406,11 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
 <li>Add new startup files, startup_stm32f0xx_ld.s, for the supported compilers</li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section1_0_2" aria-hidden="true"> <label for="collapse-section1_0_2" aria-hidden="true"><strong>V1.0.2 / 13-July-2012</strong></label>
-<h2 id="main-changes-18">Main Changes</h2>
+<div>
+<h2 id="main-changes-19">Main Changes</h2>
 <ul>
 <li>stm32f0xx.h
 <ul>
@@ -369,9 +418,11 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
 </ul></li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section1_0_1" aria-hidden="true"> <label for="collapse-section1_0_1" aria-hidden="true"><strong>V1.0.1 / 20-April-2012</strong></label>
-<h2 id="main-changes-19">Main Changes</h2>
+<div>
+<h2 id="main-changes-20">Main Changes</h2>
 <ul>
 <li>stm32f0xx.h
 <ul>
@@ -380,14 +431,17 @@ This software component is licensed by ST under BSD 3-Clause license, the “Lic
 </ul></li>
 </ul>
 </div>
+</div>
 <div class="collapse">
 <input type="checkbox" id="collapse-section1_0_0" aria-hidden="true"> <label for="collapse-section1_0_0" aria-hidden="true"><strong>V1.0.0 / 04-September-2012</strong></label>
-<h2 id="main-changes-20">Main Changes</h2>
+<div>
+<h2 id="main-changes-21">Main Changes</h2>
 <ul>
 <li>First official release for <strong>STM32F30x</strong> devices (Standard Library)</li>
 </ul>
 </div>
-</section>
+</div>
+</div>
 </div>
 <footer class="sticky">
 For complete documentation on STM32 Microcontrollers </mark> , visit: <span style="font-color: blue;"><a href="http://www.st.com/stm32">www.st.com/stm32</a></span> <em>This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge.</em>

Source/Templates/arm/startup_stm32f030x6.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -227,4 +226,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f030x8.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -237,4 +236,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f030xc.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -242,4 +241,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f031x6.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -231,4 +230,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f038xx.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -229,4 +228,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f042x6.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -272,4 +271,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f048xx.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -244,4 +243,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f051x8.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -247,4 +246,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f058xx.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -245,4 +244,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f070x6.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -262,4 +261,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f070xb.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -246,4 +245,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f071xb.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -251,4 +250,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f072xb.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -254,4 +253,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f078xx.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -254,4 +253,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f091xc.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -251,4 +250,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/arm/startup_stm32f098xx.s

@@ -10,16 +10,15 @@
 ;*                        calls main()).
 ;*                      After Reset the CortexM0 processor is in Thread mode,
 ;*                      priority is Privileged, and the Stack is set to Main.
-;********************************************************************************
+;*******************************************************************************
 ;* @attention
 ;*
 ;* Copyright (c) 2016 STMicroelectronics.
 ;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;* <<< Use Configuration Wizard in Context Menu >>>
@@ -251,4 +250,3 @@ __user_initial_stackheap
 
                  END
 
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

Source/Templates/gcc/startup_stm32f030x6.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -51,6 +50,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -254,5 +254,5 @@ g_pfnVectors:
   .weak      USART1_IRQHandler
   .thumb_set USART1_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f030x8.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -52,6 +51,9 @@ Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
 
+/* Call the clock system initialization function.*/
+  bl  SystemInit
+
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
   ldr r1, =_edata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -269,5 +269,5 @@ g_pfnVectors:
   .weak      USART2_IRQHandler
   .thumb_set USART2_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f030xc.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -51,6 +50,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -274,5 +274,5 @@ g_pfnVectors:
   .weak      USART3_6_IRQHandler
   .thumb_set USART3_6_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f031x6.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -51,6 +50,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -260,5 +260,5 @@ g_pfnVectors:
   .weak      USART1_IRQHandler
   .thumb_set USART1_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f038xx.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -51,6 +50,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -257,5 +257,5 @@ g_pfnVectors:
   .weak      USART1_IRQHandler
   .thumb_set USART1_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f042x6.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -60,6 +59,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /*Check if boot space corresponds to test memory*/
  
@@ -113,8 +115,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -305,5 +305,5 @@ g_pfnVectors:
   .weak      USB_IRQHandler
   .thumb_set USB_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f048xx.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -51,6 +50,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -275,5 +275,5 @@ g_pfnVectors:
   .weak      USB_IRQHandler
   .thumb_set USB_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f051x8.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -51,6 +50,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+  /* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -281,5 +281,5 @@ g_pfnVectors:
   .weak      CEC_CAN_IRQHandler
   .thumb_set CEC_CAN_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f058xx.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -51,6 +50,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -278,5 +278,5 @@ g_pfnVectors:
   .weak      CEC_CAN_IRQHandler
   .thumb_set CEC_CAN_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f070x6.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -60,6 +59,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /*Check if boot space corresponds to test memory*/
  
@@ -113,8 +115,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -290,5 +290,5 @@ g_pfnVectors:
   .weak      USB_IRQHandler
   .thumb_set USB_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f070xb.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -51,6 +50,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -278,5 +278,5 @@ g_pfnVectors:
   .weak      USB_IRQHandler
   .thumb_set USB_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f071xb.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -51,6 +50,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -287,5 +287,5 @@ g_pfnVectors:
   .weak      CEC_CAN_IRQHandler
   .thumb_set CEC_CAN_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f072xb.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -51,6 +50,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -290,5 +290,5 @@ g_pfnVectors:
   .weak      USB_IRQHandler
   .thumb_set USB_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f078xx.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -51,6 +50,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -290,5 +290,5 @@ g_pfnVectors:
   .weak      USB_IRQHandler
   .thumb_set USB_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f091xc.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -51,6 +50,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -286,5 +286,5 @@ g_pfnVectors:
   .weak      CEC_CAN_IRQHandler
   .thumb_set CEC_CAN_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/gcc/startup_stm32f098xx.s

@@ -14,13 +14,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -51,6 +50,9 @@ defined in linker script */
 Reset_Handler:
   ldr   r0, =_estack
   mov   sp, r0          /* set stack pointer */
+  
+/* Call the clock system initialization function.*/
+  bl  SystemInit
 
 /* Copy the data segment initializers from flash to SRAM */
   ldr r0, =_sdata
@@ -83,8 +85,6 @@ LoopFillZerobss:
   cmp r2, r4
   bcc FillZerobss
 
-/* Call the clock system intitialization function.*/
-  bl  SystemInit
 /* Call static constructors */
   bl __libc_init_array
 /* Call the application's entry point.*/
@@ -286,5 +286,5 @@ g_pfnVectors:
   .weak      CEC_CAN_IRQHandler
   .thumb_set CEC_CAN_IRQHandler,Default_Handler
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
 

Source/Templates/iar/startup_stm32f030x6.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -242,4 +241,4 @@ USART1_IRQHandler
 
         
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f030x8.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -271,4 +270,4 @@ USART2_IRQHandler
 
         
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f030xc.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -280,4 +279,4 @@ USART3_6_IRQHandler
         B USART3_6_IRQHandler
 
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f031x6.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -252,4 +251,4 @@ USART1_IRQHandler
 
         
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f038xx.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -247,4 +246,4 @@ USART1_IRQHandler
 
         
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f042x6.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -303,4 +302,4 @@ USB_IRQHandler
         B USB_IRQHandler
         
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f048xx.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -280,4 +279,4 @@ USB_IRQHandler
         B USB_IRQHandler
         
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f051x8.s

@@ -15,13 +15,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -290,4 +289,4 @@ CEC_CAN_IRQHandler
         B CEC_CAN_IRQHandler
         
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f058xx.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -284,4 +283,4 @@ CEC_CAN_IRQHandler
         B CEC_CAN_IRQHandler
         
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f070x6.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -278,4 +277,4 @@ USB_IRQHandler
         B USB_IRQHandler
 
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f070xb.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -285,4 +284,4 @@ USB_IRQHandler
         B USB_IRQHandler
         
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f071xb.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -299,4 +298,4 @@ CEC_CAN_IRQHandler
         B CEC_CAN_IRQHandler
         
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f072xb.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -305,4 +304,4 @@ USB_IRQHandler
         B USB_IRQHandler
         
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f078xx.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -305,4 +304,4 @@ USB_IRQHandler
         B USB_IRQHandler
         
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f091xc.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -299,4 +298,4 @@ CEC_CAN_IRQHandler
         B CEC_CAN_IRQHandler
       
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/iar/startup_stm32f098xx.s

@@ -14,13 +14,12 @@
 ;*******************************************************************************
 ;* @attention
 ;*
-;* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-;* All rights reserved.</center></h2>
+;* Copyright (c) 2016 STMicroelectronics.
+;* All rights reserved.
 ;*
-;* This software component is licensed by ST under BSD 3-Clause license,
-;* the "License"; You may not use this file except in compliance with the
-;* License. You may obtain a copy of the License at:
-;*                        opensource.org/licenses/BSD-3-Clause
+;* This software is licensed under terms that can be found in the LICENSE file
+;* in the root directory of this software component.
+;* If no LICENSE file comes with this software, it is provided AS-IS.
 ;*
 ;*******************************************************************************
 ;
@@ -299,4 +298,4 @@ CEC_CAN_IRQHandler
         B CEC_CAN_IRQHandler
       
         END
-;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
+

Source/Templates/system_stm32f0xx.c

@@ -22,17 +22,15 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
-
 /** @addtogroup CMSIS
   * @{
   */
@@ -156,6 +154,8 @@ void SystemInit(void)
   *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
   *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
   *
+  *           - If SYSCLK source is HSI48, SystemCoreClock will contain the HSI48_VALUE(***)
+  *
   *         (*) HSI_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value
   *             8 MHz) but the real value may vary depending on the variations
   *             in voltage and temperature.
@@ -165,6 +165,10 @@ void SystemInit(void)
   *              is same as the real frequency of the crystal used. Otherwise, this function
   *              may have wrong result.
   *
+  *         (***) HSI48_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value
+  *             48 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.
+  *
   *         - The result of this function could be not correct when using fractional
   *           value for HSE crystal.
   *
@@ -198,13 +202,13 @@ void SystemCoreClockUpdate (void)
         /* HSE used as PLL clock source : SystemCoreClock = HSE/PREDIV * PLLMUL */
         SystemCoreClock = (HSE_VALUE/predivfactor) * pllmull;
       }
-#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
       else if (pllsource == RCC_CFGR_PLLSRC_HSI48_PREDIV)
       {
         /* HSI48 used as PLL clock source : SystemCoreClock = HSI48/PREDIV * PLLMUL */
         SystemCoreClock = (HSI48_VALUE/predivfactor) * pllmull;
       }
-#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
+#endif /* STM32F042x6 || STM32F048xx || STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
       else
       {
 #if defined(STM32F042x6) || defined(STM32F048xx)  || defined(STM32F070x6) \
@@ -218,7 +222,7 @@ void SystemCoreClockUpdate (void)
 #endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || 
           STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB ||
           STM32F091xC || STM32F098xx || STM32F030xC */
-      }
+	  }
       break;
     default: /* HSI used as system clock */
       SystemCoreClock = HSI_VALUE;
@@ -243,5 +247,3 @@ void SystemCoreClockUpdate (void)
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-

_htmresc/mini-st.css

@@ -1463,7 +1463,7 @@ mark.tag {
 /*
   Definitions for progress elements and spinners.
 */
-/* Progess module CSS variable definitions */
+/* Progress module CSS variable definitions */
 :root {
   --progress-back-color: #ddd;
   --progress-fore-color: #555; }