Code cleanup. Bugfix after rebase with master. Formating.

components/esp_gdbstub/CMakeLists.txt

@@ -1,15 +1,20 @@
 idf_build_get_property(target IDF_TARGET)
 
-set(esp_gdbstub_srcs "src/gdbstub.c"
-                     "src/packet.c"
-                     "esp_common/gdbstub_common.c"
-                     "${target}/gdbstub_${target}.c"
-                     "xtensa/gdbstub-entry.S"
-                     "xtensa/gdbstub_xtensa.c")
-
-idf_component_register(SRCS "${esp_gdbstub_srcs}"
+idf_component_register(SRCS "src/gdbstub.c" "src/packet.c"
                        INCLUDE_DIRS "include"
-                       PRIV_INCLUDE_DIRS "private_include" "${target}" "xtensa"
+                       PRIV_INCLUDE_DIRS "private_include"
                        LDFRAGMENTS "linker.lf"
                        REQUIRES "freertos"
-                       PRIV_REQUIRES "soc" "xtensa" "esp_rom")
+                       PRIV_REQUIRES "soc" "esp_rom")
+
+if(CONFIG_IDF_TARGET_ARCH_XTENSA)
+    target_include_directories(${COMPONENT_LIB} PUBLIC "xtensa" "${target}")
+    target_sources(${COMPONENT_LIB} PRIVATE "xtensa/gdbstub_xtensa.c"
+                                            "xtensa/gdbstub-entry.S"
+                                            "esp_common/gdbstub_common.c")
+
+elseif(CONFIG_IDF_TARGET_ARCH_RISCV)
+    target_include_directories(${COMPONENT_LIB} PUBLIC "riscv" "${target}")
+    target_sources(${COMPONENT_LIB} PRIVATE "riscv/gdbstub_riscv.c"
+    "${target}/gdbstub_${target}.c")
+endif()

components/esp_gdbstub/component.mk

@@ -1,4 +1,4 @@
 COMPONENT_ADD_INCLUDEDIRS := include
 COMPONENT_PRIV_INCLUDEDIRS := private_include esp32 xtensa
-COMPONENT_SRCDIRS := src esp32 xtensa
+COMPONENT_SRCDIRS := src esp32 xtensa esp_common
 COMPONENT_ADD_LDFRAGMENTS += linker.lf

components/esp_gdbstub/esp32/gdbstub_esp32.c

@@ -1,18 +0,0 @@
-// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-//     http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-#include "soc/uart_periph.h"
-#include "soc/gpio_periph.h"
-#include "esp_gdbstub_common.h"
-#include "sdkconfig.h"

components/esp_gdbstub/esp32s2/gdbstub_esp32s2.c

@@ -1,18 +0,0 @@
-// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-//     http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-#include "soc/uart_periph.h"
-#include "soc/gpio_periph.h"
-#include "esp_gdbstub_common.h"
-#include "sdkconfig.h"

components/esp_gdbstub/esp32s3/gdbstub_esp32s3.c

@@ -1,19 +0,0 @@
-// Copyright 2015-2020 Espressif Systems (Shanghai) PTE LTD
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-//     http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-#include "sdkconfig.h"
-#include "soc/uart_periph.h"
-#include "soc/gpio_periph.h"
-#include "esp_gdbstub_common.h"
-

components/esp_gdbstub/esp_common/gdbstub_common.c

@@ -29,12 +29,16 @@ void esp_gdbstub_target_init(void)
     case 0:
         gdb_uart = &UART0;
         break;
+#if SOC_UART_NUM > 1
     case 1:
         gdb_uart = &UART1;
         break;
+#endif
+#if SOC_UART_NUM > 2
     case 2:
         gdb_uart = &UART2;
         break;
+#endif
     default:
         gdb_uart = &UART0;
         break;
@@ -126,4 +130,4 @@ int esp_gdbstub_writemem(unsigned int addr, unsigned char data)
     asm volatile("ISYNC\nISYNC\n");
 
     return 0;
-}
+}

components/esp_gdbstub/riscv/gdbstub_riscv.c

@@ -58,3 +58,8 @@ int esp_gdbstub_get_signal(const esp_gdbstub_frame_t *frame)
 {
       return 5; // SIGTRAP, see IDF-2490
 }
+
+void _xt_gdbstub_int(void * frame)
+{
+
+}

components/esp_gdbstub/src/gdbstub.c

@@ -24,7 +24,6 @@
 #include "hal/wdt_hal.h"
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
-//#include "esp_task_wdt.h"
 
 
 #ifdef CONFIG_ESP_GDBSTUB_SUPPORT_TASKS
@@ -43,11 +42,11 @@ static esp_gdbstub_scratch_t s_scratch;
 static esp_gdbstub_gdb_regfile_t *gdb_local_regfile = &s_scratch.regfile;
 
 /**
- * @breef panic handler
+ * @brief panic handler
 */
 void esp_gdbstub_panic_handler(void *in_frame)
 {
-    esp_gdbstub_frame_t* frame = (esp_gdbstub_frame_t*)in_frame;
+    esp_gdbstub_frame_t *frame = (esp_gdbstub_frame_t *)in_frame;
 #ifndef CONFIG_ESP_GDBSTUB_SUPPORT_TASKS
     esp_gdbstub_frame_to_regfile(frame, &s_scratch.regfile);
 #else
@@ -186,7 +185,7 @@ static inline void enable_all_wdts(void)
  * @param curr_regs - actual registers frame
  *
 */
-void gdbstub_handle_uart_int(XtExcFrame *regs_frame)
+void gdbstub_handle_uart_int(esp_gdbstub_frame_t *regs_frame)
 {
     // Disable all enabled WDT on enter
     disable_all_wdts();
@@ -234,7 +233,7 @@ intr_handle_t intr_handle_;
 extern void _xt_gdbstub_int(void * );
 
 #ifdef CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME
-/** @breef Init gdbstub
+/** @brief Init gdbstub
  * Init uart interrupt for gdbstub
  * */
 void esp_gdbstub_init(void)
@@ -395,18 +394,6 @@ static bool get_task_handle(size_t index, TaskHandle_t *handle)
     return true;
 }
 
-static eTaskState get_task_state(size_t index)
-{
-    return eSuspended;
-//    return s_scratch.tasks[index].eCurrentState;
-}
-
-static int get_task_cpu_id(size_t index)
-{
-    return 0;
-    // return s_scratch.tasks[index].xCoreID;
-}
-
 /** Get the index of the task running on the current CPU, and save the result */
 static void find_paniced_task_index(void)
 {
@@ -531,29 +518,8 @@ static void handle_qThreadExtraInfo_command(const unsigned char *cmd, int len)
     esp_gdbstub_send_str_as_hex((const char *)pcTaskGetTaskName(handle));
     esp_gdbstub_send_hex(' ', 8);
 
-    eTaskState state = get_task_state(task_index);
-    switch (state) {
-    case eRunning:
-        esp_gdbstub_send_str_as_hex("State: Running ");
-        esp_gdbstub_send_str_as_hex("@CPU");
-        esp_gdbstub_send_hex(get_task_cpu_id(task_index) + '0', 8);
-        break;
-    case eReady:
-        esp_gdbstub_send_str_as_hex("State: Ready");
-        break;
-    case eBlocked:
-        esp_gdbstub_send_str_as_hex("State: Blocked");
-        break;
-    case eSuspended:
-        esp_gdbstub_send_str_as_hex("State: Suspended");
-        break;
-    case eDeleted:
-        esp_gdbstub_send_str_as_hex("State: Deleted");
-        break;
-    default:
-        esp_gdbstub_send_str_as_hex("State: Invalid");
-        break;
-    }
+    // Current version report only Suspended state
+    esp_gdbstub_send_str_as_hex("State: Suspended");
 
     esp_gdbstub_send_end();
 }
@@ -605,4 +571,3 @@ static int handle_task_commands(unsigned char *cmd, int len)
 }
 
 #endif // CONFIG_ESP_GDBSTUB_SUPPORT_TASKS
-

components/esp_gdbstub/xtensa/esp_gdbstub_arch.h

@@ -15,6 +15,7 @@
 #pragma once
 #include <stdint.h>
 #include "freertos/xtensa_context.h"
+#include "gdbstub_target_config.h"
 
 #ifdef __cplusplus
 extern "C" {

components/esp_gdbstub/xtensa/gdbstub-entry.S

@@ -41,4 +41,3 @@ _xt_gdbstub_int:
     mov     a6,sp
     call0   gdbstub_handle_uart_int
     ret
-

components/esp_system/panic.c

@@ -30,6 +30,7 @@
 
 #include "esp_private/panic_internal.h"
 #include "port/panic_funcs.h"
+#include "esp_rom_sys.h"
 
 #include "sdkconfig.h"
 
@@ -58,6 +59,10 @@
 #include "esp_gdbstub.h"
 #endif
 
+#if CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG
+#include "hal/usb_serial_jtag_ll.h"
+#endif
+
 bool g_panic_abort = false;
 static char *s_panic_abort_details = NULL;
 
@@ -68,13 +73,13 @@ static wdt_hal_context_t wdt1_context = {.inst = WDT_MWDT1, .mwdt_dev = &TIMERG1
 #if !CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT
 
 #if CONFIG_ESP_CONSOLE_UART
-static uart_hal_context_t s_panic_uart = { .dev = CONFIG_ESP_CONSOLE_UART_NUM == 0 ? &UART0 : &UART1 };
+static uart_hal_context_t s_panic_uart = { .dev = CONFIG_ESP_CONSOLE_UART_NUM == 0 ? &UART0 :&UART1 };
 
 void panic_print_char(const char c)
 {
     uint32_t sz = 0;
-    while(!uart_hal_get_txfifo_len(&s_panic_uart));
-    uart_hal_write_txfifo(&s_panic_uart, (uint8_t*) &c, 1, &sz);
+    while (!uart_hal_get_txfifo_len(&s_panic_uart));
+    uart_hal_write_txfifo(&s_panic_uart, (uint8_t *) &c, 1, &sz);
 }
 #endif // CONFIG_ESP_CONSOLE_UART
 
@@ -87,6 +92,27 @@ void panic_print_char(const char c)
 }
 #endif // CONFIG_ESP_CONSOLE_USB_CDC
 
+#if CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG
+//Timeout; if there's no host listening, the txfifo won't ever
+//be writable after the first packet.
+
+#define USBSERIAL_TIMEOUT_MAX_US 50000
+static int s_usbserial_timeout = 0;
+
+void panic_print_char(const char c)
+{
+    while (!usb_serial_jtag_ll_txfifo_writable() && s_usbserial_timeout < (USBSERIAL_TIMEOUT_MAX_US / 100)) {
+        esp_rom_delay_us(100);
+        s_usbserial_timeout++;
+    }
+    if (usb_serial_jtag_ll_txfifo_writable()) {
+        usb_serial_jtag_ll_write_txfifo((const uint8_t *)&c, 1);
+        s_usbserial_timeout = 0;
+    }
+}
+#endif //CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG
+
+
 #if CONFIG_ESP_CONSOLE_NONE
 void panic_print_char(const char c)
 {
@@ -96,7 +122,7 @@ void panic_print_char(const char c)
 
 void panic_print_str(const char *str)
 {
-    for(int i = 0; str[i] != 0; i++) {
+    for (int i = 0; str[i] != 0; i++) {
         panic_print_char(str[i]);
     }
 }
@@ -145,7 +171,7 @@ static void reconfigure_all_wdts(void)
     //Reconfigure TWDT (Timer Group 0)
     wdt_hal_init(&wdt0_context, WDT_MWDT0, MWDT0_TICK_PRESCALER, false); //Prescaler: wdt counts in ticks of TG0_WDT_TICK_US
     wdt_hal_write_protect_disable(&wdt0_context);
-    wdt_hal_config_stage(&wdt0_context, 0, 1000*1000/MWDT0_TICKS_PER_US, WDT_STAGE_ACTION_RESET_SYSTEM);   //1 second before reset
+    wdt_hal_config_stage(&wdt0_context, 0, 1000 * 1000 / MWDT0_TICKS_PER_US, WDT_STAGE_ACTION_RESET_SYSTEM); //1 second before reset
     wdt_hal_enable(&wdt0_context);
     wdt_hal_write_protect_enable(&wdt0_context);
 
@@ -190,29 +216,29 @@ void esp_panic_handler(panic_info_t *info)
         info->exception = PANIC_EXCEPTION_ABORT;
     }
 
-   /*
-     * For any supported chip, the panic handler prints the contents of panic_info_t in the following format:
-     *
-     *
-     * Guru Meditation Error: Core <core> (<exception>). <description>
-     * <details>
-     *
-     * <state>
-     *
-     * <elf_info>
-     *
-     *
-     * ----------------------------------------------------------------------------------------
-     * core - core where exception was triggered
-     * exception - what kind of exception occured
-     * description - a short description regarding the exception that occured
-     * details - more details about the exception
-     * state - processor state like register contents, and backtrace
-     * elf_info - details about the image currently running
-     *
-     * NULL fields in panic_info_t are not printed.
-     *
-     * */
+    /*
+      * For any supported chip, the panic handler prints the contents of panic_info_t in the following format:
+      *
+      *
+      * Guru Meditation Error: Core <core> (<exception>). <description>
+      * <details>
+      *
+      * <state>
+      *
+      * <elf_info>
+      *
+      *
+      * ----------------------------------------------------------------------------------------
+      * core - core where exception was triggered
+      * exception - what kind of exception occured
+      * description - a short description regarding the exception that occured
+      * details - more details about the exception
+      * state - processor state like register contents, and backtrace
+      * elf_info - details about the image currently running
+      *
+      * NULL fields in panic_info_t are not printed.
+      *
+      * */
     if (info->reason) {
         panic_print_str("Guru Meditation Error: Core ");
         panic_print_dec(info->core);
@@ -296,7 +322,7 @@ void esp_panic_handler(panic_info_t *info)
     wdt_hal_disable(&rtc_wdt_ctx);
     wdt_hal_write_protect_enable(&rtc_wdt_ctx);
     panic_print_str("Entering gdb stub now.\r\n");
-    esp_gdbstub_panic_handler(info->frame);
+    esp_gdbstub_panic_handler((void *)info->frame);
 #else
 #if CONFIG_ESP_COREDUMP_ENABLE
     static bool s_dumping_core;
@@ -321,8 +347,7 @@ void esp_panic_handler(panic_info_t *info)
 #if CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT || CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT
 
     if (esp_reset_reason_get_hint() == ESP_RST_UNKNOWN) {
-        switch (info->exception)
-        {
+        switch (info->exception) {
         case PANIC_EXCEPTION_IWDT:
             esp_reset_reason_set_hint(ESP_RST_INT_WDT);
             break;
@@ -348,10 +373,10 @@ void esp_panic_handler(panic_info_t *info)
 }
 
 
-void __attribute__((noreturn)) panic_abort(const char *details)
+void __attribute__((noreturn, no_sanitize_undefined)) panic_abort(const char *details)
 {
     g_panic_abort = true;
-    s_panic_abort_details = (char*) details;
+    s_panic_abort_details = (char *) details;
 
 #if CONFIG_APPTRACE_ENABLE
 #if CONFIG_SYSVIEW_ENABLE
@@ -363,7 +388,7 @@ void __attribute__((noreturn)) panic_abort(const char *details)
 #endif
 
     *((int *) 0) = 0; // NOLINT(clang-analyzer-core.NullDereference) should be an invalid operation on targets
-    while(1);
+    while (1);
 }
 
 /* Weak versions of reset reason hint functions.

components/freertos/port/port_common.c

@@ -61,6 +61,10 @@ volatile unsigned port_xSchedulerRunning[portNUM_PROCESSORS] = {0};
 
 static void main_task(void* args);
 
+#ifdef CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME
+void esp_gdbstub_init(void);
+#endif // CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME
+
 extern void app_main(void);
 
 void esp_startup_start_app_common(void)
@@ -79,6 +83,10 @@ void esp_startup_start_app_common(void)
 #endif
 #endif
 
+#ifdef CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME
+    esp_gdbstub_init();
+#endif // CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME
+
 	portBASE_TYPE res = xTaskCreatePinnedToCore(&main_task, "main",
 												ESP_TASK_MAIN_STACK, NULL,
 												ESP_TASK_MAIN_PRIO, NULL, ESP_TASK_MAIN_CORE);

docs/en/api-guides/tools/idf-monitor.rst

@@ -10,7 +10,6 @@ This tool can be launched from an IDF project by running ``idf.py monitor``.
 
 For the legacy GNU Make system, run ``make monitor``.
 
-
 Keyboard Shortcuts
 ==================
 
@@ -59,9 +58,9 @@ For easy interaction with IDF Monitor, use the keyboard shortcuts given in the t
    * - * Ctrl+X (or X)
      - Exit the program
      -                
-   * - Ctrl+]
+   * - Ctrl+C
      - Interrupt running application
-     - Pauses IDF monitor and run GDB_ project debugger to debug the application at runtime.     
+     - Pauses IDF monitor and run GDB_ project debugger to debug the application at runtime. This requires :ref:CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME option to be enabled.     
 
 Any keys pressed, other than ``Ctrl-]`` and ``Ctrl-T``, will be sent through the serial port.
 
@@ -187,6 +186,7 @@ To decode each address, IDF Monitor runs the following command in the background
 Launching GDB with GDBStub
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
+
 By default, if esp-idf crashes, the panic handler prints relevant registers and the stack dump (similar to the ones above) over the serial port. Then it resets the board.
 
 Furthermore, the application can be configured to run GDBStub in the background and handle the Ctrl+C event from the monitor.

examples/get-started/hello_world/main/CMakeLists.txt

@@ -1,2 +1,2 @@
 idf_component_register(SRCS "hello_world_main.c"
-                    INCLUDE_DIRS "")
+                    INCLUDE_DIRS "")

examples/system/gdbstub/CMakeLists.txt

@@ -3,4 +3,4 @@
 cmake_minimum_required(VERSION 3.5)
 
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
-project(gdbstub)
+project(gdbstub)

examples/system/gdbstub/Makefile

@@ -6,4 +6,3 @@
 PROJECT_NAME := gdbstub
 
 include $(IDF_PATH)/make/project.mk
-

examples/system/gdbstub/main/CMakeLists.txt

@@ -1,2 +1,2 @@
 idf_component_register(SRCS "gdbstub_main.c"
-                    INCLUDE_DIRS "")
+                    INCLUDE_DIRS "")

examples/system/gdbstub/main/component.mk

@@ -2,4 +2,3 @@
 # "main" pseudo-component makefile.
 #
 # (Uses default behaviour of compiling all source files in directory, adding 'include' to include path.)
-

examples/system/gdbstub/sdkconfig.defaults

@@ -19,4 +19,4 @@ CONFIG_FREERTOS_UNICORE=y
 # CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
 CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME=y
 CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE=y
-# end of ESP System Settings
+# end of ESP System Settings

tools/idf.py

@@ -33,15 +33,13 @@ import json
 import locale
 import os
 import os.path
+import signal
 import subprocess
 import sys
 from collections import Counter, OrderedDict
 from importlib import import_module
 from pkgutil import iter_modules
 
-import signal
-
-
 # pyc files remain in the filesystem when switching between branches which might raise errors for incompatible
 # idf.py extensions. Therefore, pyc file generation is turned off:
 sys.dont_write_bytecode = True
@@ -726,7 +724,7 @@ def init_cli(verbose_output=None):
     return CLI(help=cli_help, verbose_output=verbose_output, all_actions=all_actions)
 
 
-def signal_handler(signal, frame):
+def signal_handler(_signal, _frame):
     # The Ctrl+C processed by other threads inside
     pass
 

tools/idf_monitor.py

@@ -202,10 +202,10 @@ class Monitor(object):
                     elif event_tag == TAG_SERIAL_FLUSH:
                         self.handle_serial_input(data, finalize_line=True)
                     else:
-                        raise RuntimeError("Bad event data %r" % ((event_tag,data),))
+                        raise RuntimeError('Bad event data %r' % ((event_tag,data),))
                 except KeyboardInterrupt:
                     try:
-                        yellow_print("To exit from IDF monitor please use \"Ctrl+]\"")
+                        yellow_print('To exit from IDF monitor please use \"Ctrl+]\"')
                         self.serial.write(codecs.encode('\x03'))
                     except serial.SerialException:
                         pass  # this shouldn't happen, but sometimes port has closed in serial thread
@@ -232,9 +232,9 @@ class Monitor(object):
         # Remove "+" after Continue command
         if self.start_cmd_sent is True:
             self.start_cmd_sent = False
-            pos = data.find(b"+")
+            pos = data.find(b'+')
             if pos != -1:
-                data = data[1:]
+                data = data[(pos + 1):]
 
         sp = data.split(b'\n')
         if self._last_line_part != b'':
@@ -520,21 +520,20 @@ class Monitor(object):
                        self.elf_file]
 
                 # Here we handling GDB as a process
-                if True:
-                    # Open GDB process
+                # Open GDB process
+                try:
+                    process = subprocess.Popen(cmd, cwd='.')
+                except KeyboardInterrupt:
+                    pass
+
+                # We ignore Ctrl+C interrupt form external process abd wait responce util GDB will be finished.
+                while True:
                     try:
-                        process = subprocess.Popen(cmd, cwd=".")
+                        process.wait()
+                        break
                     except KeyboardInterrupt:
-                        pass
-
-                    # We ignore Ctrl+C interrupt form external process abd wait responce util GDB will be finished.
-                    while True:
-                        try:
-                            process.wait()
-                            break
-                        except KeyboardInterrupt:
-                            pass    # We ignore the Ctrl+C
-                    self.gdb_exit = True
+                        pass    # We ignore the Ctrl+C
+                self.gdb_exit = True
 
             except OSError as e:
                 red_print('%s: %s' % (' '.join(cmd), e))

tools/idf_monitor_base/serial_reader.py

@@ -50,18 +50,16 @@ class SerialReader(StoppableThread):
             self.serial.baudrate = self.baud
             # We can come to this thread at startup or from external application line GDB.
             # If we come from GDB we would like to continue to run without reset.
-            if self.gdb_exit is False:
+            if self.gdb_exit:
+                self.serial.rts = False
+                self.serial.dtr = True
+            else:                           # if we exit from GDB, we don't need to reset the target
                 # This sequence of DTR/RTS and open/close set the serial port to
                 # condition when GDB not make reset of the target by switching DTR/RTS.
                 self.serial.rts = True  # IO0=LOW
                 self.serial.dtr = self.serial.dtr   # usbser.sys workaround
-                self.serial.open()
-                self.serial.close()
                 self.serial.rts = False     # IO0=HIGH
                 self.serial.dtr = False
-            else:                           # if we exit from GDB, we don't need to reset the target
-                self.serial.rts = False
-                self.serial.dtr = True
 
             # Current state not reset the target!
             self.gdb_exit = False

tools/windows/idf_exe/idf_main.c

@@ -16,9 +16,6 @@
 #include <shlwapi.h>
 #include <strsafe.h>
 #include <stdarg.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <unistd.h>
 
 #define LINESIZE 1024
 
@@ -46,17 +43,6 @@ BOOL WINAPI CtrlHandler(DWORD fdwCtrlType)
     }
 }
 
-BOOL WINAPI CtrlHandler(DWORD fdwCtrlType)
-{
-    switch (fdwCtrlType) {
-    // Handle the CTRL-C signal.
-    case CTRL_C_EVENT:
-        return TRUE;
-    default:
-        return FALSE;
-    }
-}
-
 int main(int argc, LPTSTR argv[])
 {
     /* Print the version of this wrapper tool, but only if invoked as "idf.exe".