ble_mesh: Remove useless example files

examples/bluetooth/esp_ble_mesh/ble_mesh_client_model/main/board.c

@@ -1,115 +0,0 @@
-/* board.c - Board-specific hooks */
-
-/*
- * Copyright (c) 2017 Intel Corporation
- * Additional Copyright (c) 2018 Espressif Systems (Shanghai) PTE LTD
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-#include <stdio.h>
-
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "freertos/event_groups.h"
-
-#include "driver/uart.h"
-#include "esp_log.h"
-
-#include "esp_ble_mesh_provisioning_api.h"
-#include "board.h"
-
-#define TAG "BOARD"
-
-#define MESH_UART_NUM UART_NUM_1
-
-#define UART_BUF_SIZE 128
-
-#define UART1_TX_PIN  GPIO_NUM_16
-#define UART1_RX_PIN  GPIO_NUM_17
-
-extern uint16_t remote_addr;
-
-struct _led_state led_state[3] = {
-    { LED_OFF, LED_OFF, LED_R, "red"   },
-    { LED_OFF, LED_OFF, LED_G, "green" },
-    { LED_OFF, LED_OFF, LED_B, "blue"  },
-};
-
-void board_output_number(esp_ble_mesh_output_action_t action, uint32_t number)
-{
-    ESP_LOGI(TAG, "Board output number %d", number);
-}
-
-void board_prov_complete(void)
-{
-    board_led_operation(LED_G, LED_OFF);
-}
-
-void board_led_operation(uint8_t pin, uint8_t onoff)
-{
-    for (int i = 0; i < ARRAY_SIZE(led_state); i++) {
-        if (led_state[i].pin != pin) {
-            continue;
-        }
-        if (onoff == led_state[i].previous) {
-            ESP_LOGW(TAG, "led %s is already %s",
-                     led_state[i].name, (onoff ? "on" : "off"));
-            return;
-        }
-        gpio_set_level(pin, onoff);
-        led_state[i].previous = onoff;
-        return;
-    }
-    ESP_LOGE(TAG, "LED is not found!");
-}
-
-static void board_uart_task(void *p)
-{
-    uint8_t *data = calloc(1, UART_BUF_SIZE);
-    uint32_t input;
-
-    while (1) {
-        int len = uart_read_bytes(MESH_UART_NUM, data, UART_BUF_SIZE, 100 / portTICK_RATE_MS);
-        if (len > 0) {
-            input = strtoul((const char *)data, NULL, 16);
-            remote_addr = input & 0xFFFF;
-            ESP_LOGI(TAG, "%s: input 0x%08x, remote_addr 0x%04x", __func__, input, remote_addr);
-            memset(data, 0, UART_BUF_SIZE);
-        }
-    }
-
-    vTaskDelete(NULL);
-}
-
-static void board_led_init(void)
-{
-    for (int i = 0; i < ARRAY_SIZE(led_state); i++) {
-        gpio_pad_select_gpio(led_state[i].pin);
-        gpio_set_direction(led_state[i].pin, GPIO_MODE_OUTPUT);
-        gpio_set_level(led_state[i].pin, LED_OFF);
-        led_state[i].previous = LED_OFF;
-    }
-}
-
-static void board_uart_init(void)
-{
-    uart_config_t uart_config = {
-        .baud_rate = 115200,
-        .data_bits = UART_DATA_8_BITS,
-        .parity = UART_PARITY_DISABLE,
-        .stop_bits = UART_STOP_BITS_1,
-        .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
-        .source_clk = UART_SCLK_APB,
-    };
-    uart_driver_install(MESH_UART_NUM, UART_BUF_SIZE * 2, 0, 0, NULL, 0);
-    uart_param_config(MESH_UART_NUM, &uart_config);
-    uart_set_pin(MESH_UART_NUM, UART1_TX_PIN, UART1_RX_PIN, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
-}
-
-void board_init(void)
-{
-    board_led_init();
-    board_uart_init();
-    xTaskCreate(board_uart_task, "board_uart_task", 2048, NULL, 5, NULL);
-}