|
|
@@ -1,2347 +1,2900 @@
|
|
|
-// Copyright 2017-2021 Espressif Systems (Shanghai) PTE LTD
|
|
|
-//
|
|
|
-// Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
-// you may not use this file except in compliance with the License.
|
|
|
-// You may obtain a copy of the License at
|
|
|
-//
|
|
|
-// http://www.apache.org/licenses/LICENSE-2.0
|
|
|
-//
|
|
|
-// Unless required by applicable law or agreed to in writing, software
|
|
|
-// distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
-// See the License for the specific language governing permissions and
|
|
|
-// limitations under the License.
|
|
|
-#ifndef _SOC_RMT_REG_H_
|
|
|
-#define _SOC_RMT_REG_H_
|
|
|
+/** Copyright 2021 Espressif Systems (Shanghai) PTE LTD
|
|
|
+ *
|
|
|
+ * Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
+ * you may not use this file except in compliance with the License.
|
|
|
+ * You may obtain a copy of the License at
|
|
|
+ *
|
|
|
+ * http://www.apache.org/licenses/LICENSE-2.0
|
|
|
+ *
|
|
|
+ * Unless required by applicable law or agreed to in writing, software
|
|
|
+ * distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
+ * See the License for the specific language governing permissions and
|
|
|
+ * limitations under the License.
|
|
|
+ */
|
|
|
+#pragma once
|
|
|
|
|
|
-
|
|
|
-#include "soc.h"
|
|
|
+#include <stdint.h>
|
|
|
+#include "soc/soc.h"
|
|
|
#ifdef __cplusplus
|
|
|
extern "C" {
|
|
|
#endif
|
|
|
|
|
|
-#define RMT_CH0DATA_REG (DR_REG_RMT_BASE + 0x0)
|
|
|
+/** RMT_CH0DATA_REG register
|
|
|
+ * The read and write data register for CHANNEL0 by apb fifo access.
|
|
|
+ */
|
|
|
+#define RMT_CH0DATA_REG (DR_REG_RMT_BASE + 0x0)
|
|
|
+/** RMT_CH0DATA : RO; bitpos: [31:0]; default: 0;
|
|
|
+ * Read and write data for channel 0 via APB FIFO.
|
|
|
+ */
|
|
|
+#define RMT_CH0DATA 0xFFFFFFFFU
|
|
|
+#define RMT_CH0DATA_M (RMT_CH0DATA_V << RMT_CH0DATA_S)
|
|
|
+#define RMT_CH0DATA_V 0xFFFFFFFFU
|
|
|
+#define RMT_CH0DATA_S 0
|
|
|
|
|
|
-#define RMT_CH1DATA_REG (DR_REG_RMT_BASE + 0x4)
|
|
|
+/** RMT_CH1DATA_REG register
|
|
|
+ * The read and write data register for CHANNEL1 by apb fifo access.
|
|
|
+ */
|
|
|
+#define RMT_CH1DATA_REG (DR_REG_RMT_BASE + 0x4)
|
|
|
+/** RMT_CH1DATA : RO; bitpos: [31:0]; default: 0;
|
|
|
+ * Read and write data for channel 1 via APB FIFO.
|
|
|
+ */
|
|
|
+#define RMT_CH1DATA 0xFFFFFFFFU
|
|
|
+#define RMT_CH1DATA_M (RMT_CH1DATA_V << RMT_CH1DATA_S)
|
|
|
+#define RMT_CH1DATA_V 0xFFFFFFFFU
|
|
|
+#define RMT_CH1DATA_S 0
|
|
|
|
|
|
-#define RMT_CH2DATA_REG (DR_REG_RMT_BASE + 0x8)
|
|
|
+/** RMT_CH2DATA_REG register
|
|
|
+ * The read and write data register for CHANNEL2 by apb fifo access.
|
|
|
+ */
|
|
|
+#define RMT_CH2DATA_REG (DR_REG_RMT_BASE + 0x8)
|
|
|
+/** RMT_CH2DATA : RO; bitpos: [31:0]; default: 0;
|
|
|
+ * Read and write data for channel 2 via APB FIFO.
|
|
|
+ */
|
|
|
+#define RMT_CH2DATA 0xFFFFFFFFU
|
|
|
+#define RMT_CH2DATA_M (RMT_CH2DATA_V << RMT_CH2DATA_S)
|
|
|
+#define RMT_CH2DATA_V 0xFFFFFFFFU
|
|
|
+#define RMT_CH2DATA_S 0
|
|
|
|
|
|
-#define RMT_CH3DATA_REG (DR_REG_RMT_BASE + 0xC)
|
|
|
+/** RMT_CH3DATA_REG register
|
|
|
+ * The read and write data register for CHANNEL3 by apb fifo access.
|
|
|
+ */
|
|
|
+#define RMT_CH3DATA_REG (DR_REG_RMT_BASE + 0xc)
|
|
|
+/** RMT_CH3DATA : RO; bitpos: [31:0]; default: 0;
|
|
|
+ * Read and write data for channel 3 via APB FIFO.
|
|
|
+ */
|
|
|
+#define RMT_CH3DATA 0xFFFFFFFFU
|
|
|
+#define RMT_CH3DATA_M (RMT_CH3DATA_V << RMT_CH3DATA_S)
|
|
|
+#define RMT_CH3DATA_V 0xFFFFFFFFU
|
|
|
+#define RMT_CH3DATA_S 0
|
|
|
|
|
|
-#define RMT_CH4DATA_REG (DR_REG_RMT_BASE + 0x10)
|
|
|
+/** RMT_CH4DATA_REG register
|
|
|
+ * The read and write data register for CHANNEL$n by apb fifo access.
|
|
|
+ */
|
|
|
+#define RMT_CH4DATA_REG (DR_REG_RMT_BASE + 0x10)
|
|
|
+/** RMT_CH4DATA : RO; bitpos: [31:0]; default: 0;
|
|
|
+ * Read and write data for channel $n via APB FIFO.
|
|
|
+ */
|
|
|
+#define RMT_CH4DATA 0xFFFFFFFFU
|
|
|
+#define RMT_CH4DATA_M (RMT_CH4DATA_V << RMT_CH4DATA_S)
|
|
|
+#define RMT_CH4DATA_V 0xFFFFFFFFU
|
|
|
+#define RMT_CH4DATA_S 0
|
|
|
|
|
|
-#define RMT_CH5DATA_REG (DR_REG_RMT_BASE + 0x14)
|
|
|
+/** RMT_CH5DATA_REG register
|
|
|
+ * The read and write data register for CHANNEL$n by apb fifo access.
|
|
|
+ */
|
|
|
+#define RMT_CH5DATA_REG (DR_REG_RMT_BASE + 0x14)
|
|
|
+/** RMT_CH5DATA : RO; bitpos: [31:0]; default: 0;
|
|
|
+ * Read and write data for channel $n via APB FIFO.
|
|
|
+ */
|
|
|
+#define RMT_CH5DATA 0xFFFFFFFFU
|
|
|
+#define RMT_CH5DATA_M (RMT_CH5DATA_V << RMT_CH5DATA_S)
|
|
|
+#define RMT_CH5DATA_V 0xFFFFFFFFU
|
|
|
+#define RMT_CH5DATA_S 0
|
|
|
|
|
|
-#define RMT_CH6DATA_REG (DR_REG_RMT_BASE + 0x18)
|
|
|
+/** RMT_CH6DATA_REG register
|
|
|
+ * The read and write data register for CHANNEL$n by apb fifo access.
|
|
|
+ */
|
|
|
+#define RMT_CH6DATA_REG (DR_REG_RMT_BASE + 0x18)
|
|
|
+/** RMT_CH6DATA : RO; bitpos: [31:0]; default: 0;
|
|
|
+ * Read and write data for channel $n via APB FIFO.
|
|
|
+ */
|
|
|
+#define RMT_CH6DATA 0xFFFFFFFFU
|
|
|
+#define RMT_CH6DATA_M (RMT_CH6DATA_V << RMT_CH6DATA_S)
|
|
|
+#define RMT_CH6DATA_V 0xFFFFFFFFU
|
|
|
+#define RMT_CH6DATA_S 0
|
|
|
|
|
|
-#define RMT_CH7DATA_REG (DR_REG_RMT_BASE + 0x1C)
|
|
|
+/** RMT_CH7DATA_REG register
|
|
|
+ * The read and write data register for CHANNEL$n by apb fifo access.
|
|
|
+ */
|
|
|
+#define RMT_CH7DATA_REG (DR_REG_RMT_BASE + 0x1c)
|
|
|
+/** RMT_CH7DATA : RO; bitpos: [31:0]; default: 0;
|
|
|
+ * Read and write data for channel $n via APB FIFO.
|
|
|
+ */
|
|
|
+#define RMT_CH7DATA 0xFFFFFFFFU
|
|
|
+#define RMT_CH7DATA_M (RMT_CH7DATA_V << RMT_CH7DATA_S)
|
|
|
+#define RMT_CH7DATA_V 0xFFFFFFFFU
|
|
|
+#define RMT_CH7DATA_S 0
|
|
|
|
|
|
-#define RMT_CH0CONF0_REG (DR_REG_RMT_BASE + 0x20)
|
|
|
-/* RMT_CONF_UPDATE_CH0 : WT ;bitpos:[24] ;default: 1'b0 ; */
|
|
|
-/*description: synchronization bit for CHANNEL$n.*/
|
|
|
-#define RMT_CONF_UPDATE_CH0 (BIT(24))
|
|
|
-#define RMT_CONF_UPDATE_CH0_M (BIT(24))
|
|
|
-#define RMT_CONF_UPDATE_CH0_V 0x1
|
|
|
-#define RMT_CONF_UPDATE_CH0_S 24
|
|
|
-/* RMT_AFIFO_RST_CH0 : WT ;bitpos:[23] ;default: 1'b0 ; */
|
|
|
-/*description: Reserved.*/
|
|
|
-#define RMT_AFIFO_RST_CH0 (BIT(23))
|
|
|
-#define RMT_AFIFO_RST_CH0_M (BIT(23))
|
|
|
-#define RMT_AFIFO_RST_CH0_V 0x1
|
|
|
-#define RMT_AFIFO_RST_CH0_S 23
|
|
|
-/* RMT_CARRIER_OUT_LV_CH0 : R/W ;bitpos:[22] ;default: 1'b1 ; */
|
|
|
-/*description: This bit is used to configure the position of carrier wave for CHANNEL$n.; ; 1'h
|
|
|
-0: add carrier wave on low level.; ; 1'h1: add carrier wave on high level..*/
|
|
|
-#define RMT_CARRIER_OUT_LV_CH0 (BIT(22))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH0_M (BIT(22))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH0_V 0x1
|
|
|
-#define RMT_CARRIER_OUT_LV_CH0_S 22
|
|
|
-/* RMT_CARRIER_EN_CH0 : R/W ;bitpos:[21] ;default: 1'b1 ; */
|
|
|
-/*description: This is the carrier modulation enable-control bit for CHANNEL$n. 1: Add carrier
|
|
|
-modulation in the output signal. 0: No carrier modulation in sig_out..*/
|
|
|
-#define RMT_CARRIER_EN_CH0 (BIT(21))
|
|
|
-#define RMT_CARRIER_EN_CH0_M (BIT(21))
|
|
|
-#define RMT_CARRIER_EN_CH0_V 0x1
|
|
|
-#define RMT_CARRIER_EN_CH0_S 21
|
|
|
-/* RMT_CARRIER_EFF_EN_CH0 : R/W ;bitpos:[20] ;default: 1'b1 ; */
|
|
|
-/*description: 1: Add carrier modulation on the output signal only at the send data state for C
|
|
|
-HANNEL$n. 0: Add carrier modulation on the output signal at all state for CHANNE
|
|
|
-L$n. Only valid when RMT_CARRIER_EN_CH$n is 1..*/
|
|
|
-#define RMT_CARRIER_EFF_EN_CH0 (BIT(20))
|
|
|
-#define RMT_CARRIER_EFF_EN_CH0_M (BIT(20))
|
|
|
-#define RMT_CARRIER_EFF_EN_CH0_V 0x1
|
|
|
-#define RMT_CARRIER_EFF_EN_CH0_S 20
|
|
|
-/* RMT_MEM_SIZE_CH0 : R/W ;bitpos:[19:16] ;default: 4'h1 ; */
|
|
|
-/*description: This register is used to configure the maximum size of memory allocated to CHANN
|
|
|
-EL$n..*/
|
|
|
-#define RMT_MEM_SIZE_CH0 0x0000000F
|
|
|
-#define RMT_MEM_SIZE_CH0_M ((RMT_MEM_SIZE_CH0_V)<<(RMT_MEM_SIZE_CH0_S))
|
|
|
-#define RMT_MEM_SIZE_CH0_V 0xF
|
|
|
-#define RMT_MEM_SIZE_CH0_S 16
|
|
|
-/* RMT_DIV_CNT_CH0 : R/W ;bitpos:[15:8] ;default: 8'h2 ; */
|
|
|
-/*description: This register is used to configure the divider for clock of CHANNEL$n..*/
|
|
|
-#define RMT_DIV_CNT_CH0 0x000000FF
|
|
|
-#define RMT_DIV_CNT_CH0_M ((RMT_DIV_CNT_CH0_V)<<(RMT_DIV_CNT_CH0_S))
|
|
|
-#define RMT_DIV_CNT_CH0_V 0xFF
|
|
|
-#define RMT_DIV_CNT_CH0_S 8
|
|
|
-/* RMT_TX_STOP_CH0 : R/W/SC ;bitpos:[7] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to stop the transmitter of CHANNEL$n sending data out..*/
|
|
|
-#define RMT_TX_STOP_CH0 (BIT(7))
|
|
|
-#define RMT_TX_STOP_CH0_M (BIT(7))
|
|
|
-#define RMT_TX_STOP_CH0_V 0x1
|
|
|
-#define RMT_TX_STOP_CH0_S 7
|
|
|
-/* RMT_IDLE_OUT_EN_CH0 : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
|
-/*description: This is the output enable-control bit for CHANNEL$n in IDLE state..*/
|
|
|
-#define RMT_IDLE_OUT_EN_CH0 (BIT(6))
|
|
|
-#define RMT_IDLE_OUT_EN_CH0_M (BIT(6))
|
|
|
-#define RMT_IDLE_OUT_EN_CH0_V 0x1
|
|
|
-#define RMT_IDLE_OUT_EN_CH0_S 6
|
|
|
-/* RMT_IDLE_OUT_LV_CH0 : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
|
-/*description: This bit configures the level of output signal in CHANNEL$n when the latter is i
|
|
|
-n IDLE state..*/
|
|
|
-#define RMT_IDLE_OUT_LV_CH0 (BIT(5))
|
|
|
-#define RMT_IDLE_OUT_LV_CH0_M (BIT(5))
|
|
|
-#define RMT_IDLE_OUT_LV_CH0_V 0x1
|
|
|
-#define RMT_IDLE_OUT_LV_CH0_S 5
|
|
|
-/* RMT_MEM_TX_WRAP_EN_CH0 : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: This is the channel $n enable bit for wraparound mode: it will resume sending at
|
|
|
- the start when the data to be sent is more than its memory size..*/
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH0 (BIT(4))
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH0_M (BIT(4))
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH0_V 0x1
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH0_S 4
|
|
|
-/* RMT_TX_CONTI_MODE_CH0 : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to restart transmission from the first data to the last data in CH
|
|
|
-ANNEL$n..*/
|
|
|
-#define RMT_TX_CONTI_MODE_CH0 (BIT(3))
|
|
|
-#define RMT_TX_CONTI_MODE_CH0_M (BIT(3))
|
|
|
-#define RMT_TX_CONTI_MODE_CH0_V 0x1
|
|
|
-#define RMT_TX_CONTI_MODE_CH0_S 3
|
|
|
-/* RMT_APB_MEM_RST_CH0 : WT ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to reset W/R ram address for CHANNEL$n by accessing apb fifo..*/
|
|
|
-#define RMT_APB_MEM_RST_CH0 (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH0_M (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH0_V 0x1
|
|
|
-#define RMT_APB_MEM_RST_CH0_S 2
|
|
|
-/* RMT_MEM_RD_RST_CH0 : WT ;bitpos:[1] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to reset read ram address for CHANNEL$n by accessing transmitter..*/
|
|
|
-#define RMT_MEM_RD_RST_CH0 (BIT(1))
|
|
|
-#define RMT_MEM_RD_RST_CH0_M (BIT(1))
|
|
|
-#define RMT_MEM_RD_RST_CH0_V 0x1
|
|
|
-#define RMT_MEM_RD_RST_CH0_S 1
|
|
|
-/* RMT_TX_START_CH0 : WT ;bitpos:[0] ;default: 1'h0 ; */
|
|
|
-/*description: Set this bit to start sending data on CHANNEL$n..*/
|
|
|
-#define RMT_TX_START_CH0 (BIT(0))
|
|
|
-#define RMT_TX_START_CH0_M (BIT(0))
|
|
|
-#define RMT_TX_START_CH0_V 0x1
|
|
|
-#define RMT_TX_START_CH0_S 0
|
|
|
+/** RMT_CH0CONF0_REG register
|
|
|
+ * Channel 0 configure register 0
|
|
|
+ */
|
|
|
+#define RMT_CH0CONF0_REG (DR_REG_RMT_BASE + 0x20)
|
|
|
+/** RMT_TX_START_0 : WT; bitpos: [0]; default: 0;
|
|
|
+ * Set this bit to start sending data on CHANNEL0.
|
|
|
+ */
|
|
|
+#define RMT_TX_START_0 (BIT(0))
|
|
|
+#define RMT_TX_START_0_M (RMT_TX_START_0_V << RMT_TX_START_0_S)
|
|
|
+#define RMT_TX_START_0_V 0x00000001U
|
|
|
+#define RMT_TX_START_0_S 0
|
|
|
+/** RMT_MEM_RD_RST_0 : WT; bitpos: [1]; default: 0;
|
|
|
+ * Set this bit to reset read ram address for CHANNEL0 by accessing transmitter.
|
|
|
+ */
|
|
|
+#define RMT_MEM_RD_RST_0 (BIT(1))
|
|
|
+#define RMT_MEM_RD_RST_0_M (RMT_MEM_RD_RST_0_V << RMT_MEM_RD_RST_0_S)
|
|
|
+#define RMT_MEM_RD_RST_0_V 0x00000001U
|
|
|
+#define RMT_MEM_RD_RST_0_S 1
|
|
|
+/** RMT_APB_MEM_RST_0 : WT; bitpos: [2]; default: 0;
|
|
|
+ * Set this bit to reset W/R ram address for CHANNEL0 by accessing apb fifo.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RST_0 (BIT(2))
|
|
|
+#define RMT_APB_MEM_RST_0_M (RMT_APB_MEM_RST_0_V << RMT_APB_MEM_RST_0_S)
|
|
|
+#define RMT_APB_MEM_RST_0_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_RST_0_S 2
|
|
|
+/** RMT_TX_CONTI_MODE_0 : R/W; bitpos: [3]; default: 0;
|
|
|
+ * Set this bit to restart transmission from the first data to the last data in
|
|
|
+ * CHANNEL0.
|
|
|
+ */
|
|
|
+#define RMT_TX_CONTI_MODE_0 (BIT(3))
|
|
|
+#define RMT_TX_CONTI_MODE_0_M (RMT_TX_CONTI_MODE_0_V << RMT_TX_CONTI_MODE_0_S)
|
|
|
+#define RMT_TX_CONTI_MODE_0_V 0x00000001U
|
|
|
+#define RMT_TX_CONTI_MODE_0_S 3
|
|
|
+/** RMT_MEM_TX_WRAP_EN_0 : R/W; bitpos: [4]; default: 0;
|
|
|
+ * This is the channel 0 enable bit for wraparound mode: it will resume sending at the
|
|
|
+ * start when the data to be sent is more than its memory size.
|
|
|
+ */
|
|
|
+#define RMT_MEM_TX_WRAP_EN_0 (BIT(4))
|
|
|
+#define RMT_MEM_TX_WRAP_EN_0_M (RMT_MEM_TX_WRAP_EN_0_V << RMT_MEM_TX_WRAP_EN_0_S)
|
|
|
+#define RMT_MEM_TX_WRAP_EN_0_V 0x00000001U
|
|
|
+#define RMT_MEM_TX_WRAP_EN_0_S 4
|
|
|
+/** RMT_IDLE_OUT_LV_0 : R/W; bitpos: [5]; default: 0;
|
|
|
+ * This bit configures the level of output signal in CHANNEL0 when the latter is in
|
|
|
+ * IDLE state.
|
|
|
+ */
|
|
|
+#define RMT_IDLE_OUT_LV_0 (BIT(5))
|
|
|
+#define RMT_IDLE_OUT_LV_0_M (RMT_IDLE_OUT_LV_0_V << RMT_IDLE_OUT_LV_0_S)
|
|
|
+#define RMT_IDLE_OUT_LV_0_V 0x00000001U
|
|
|
+#define RMT_IDLE_OUT_LV_0_S 5
|
|
|
+/** RMT_IDLE_OUT_EN_0 : R/W; bitpos: [6]; default: 0;
|
|
|
+ * This is the output enable-control bit for CHANNEL0 in IDLE state.
|
|
|
+ */
|
|
|
+#define RMT_IDLE_OUT_EN_0 (BIT(6))
|
|
|
+#define RMT_IDLE_OUT_EN_0_M (RMT_IDLE_OUT_EN_0_V << RMT_IDLE_OUT_EN_0_S)
|
|
|
+#define RMT_IDLE_OUT_EN_0_V 0x00000001U
|
|
|
+#define RMT_IDLE_OUT_EN_0_S 6
|
|
|
+/** RMT_TX_STOP_0 : R/W/SC; bitpos: [7]; default: 0;
|
|
|
+ * Set this bit to stop the transmitter of CHANNEL0 sending data out.
|
|
|
+ */
|
|
|
+#define RMT_TX_STOP_0 (BIT(7))
|
|
|
+#define RMT_TX_STOP_0_M (RMT_TX_STOP_0_V << RMT_TX_STOP_0_S)
|
|
|
+#define RMT_TX_STOP_0_V 0x00000001U
|
|
|
+#define RMT_TX_STOP_0_S 7
|
|
|
+/** RMT_DIV_CNT_0 : R/W; bitpos: [15:8]; default: 2;
|
|
|
+ * This register is used to configure the divider for clock of CHANNEL0.
|
|
|
+ */
|
|
|
+#define RMT_DIV_CNT_0 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_0_M (RMT_DIV_CNT_0_V << RMT_DIV_CNT_0_S)
|
|
|
+#define RMT_DIV_CNT_0_V 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_0_S 8
|
|
|
+/** RMT_MEM_SIZE_0 : R/W; bitpos: [19:16]; default: 1;
|
|
|
+ * This register is used to configure the maximum size of memory allocated to CHANNEL0.
|
|
|
+ */
|
|
|
+#define RMT_MEM_SIZE_0 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_0_M (RMT_MEM_SIZE_0_V << RMT_MEM_SIZE_0_S)
|
|
|
+#define RMT_MEM_SIZE_0_V 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_0_S 16
|
|
|
+/** RMT_CARRIER_EFF_EN_0 : R/W; bitpos: [20]; default: 1;
|
|
|
+ * 1: Add carrier modulation on the output signal only at the send data state for
|
|
|
+ * CHANNEL0. 0: Add carrier modulation on the output signal at all state for CHANNEL0.
|
|
|
+ * Only valid when RMT_CARRIER_EN_CH0 is 1.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_EFF_EN_0 (BIT(20))
|
|
|
+#define RMT_CARRIER_EFF_EN_0_M (RMT_CARRIER_EFF_EN_0_V << RMT_CARRIER_EFF_EN_0_S)
|
|
|
+#define RMT_CARRIER_EFF_EN_0_V 0x00000001U
|
|
|
+#define RMT_CARRIER_EFF_EN_0_S 20
|
|
|
+/** RMT_CARRIER_EN_0 : R/W; bitpos: [21]; default: 1;
|
|
|
+ * This is the carrier modulation enable-control bit for CHANNEL0. 1: Add carrier
|
|
|
+ * modulation in the output signal. 0: No carrier modulation in sig_out.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_EN_0 (BIT(21))
|
|
|
+#define RMT_CARRIER_EN_0_M (RMT_CARRIER_EN_0_V << RMT_CARRIER_EN_0_S)
|
|
|
+#define RMT_CARRIER_EN_0_V 0x00000001U
|
|
|
+#define RMT_CARRIER_EN_0_S 21
|
|
|
+/** RMT_CARRIER_OUT_LV_0 : R/W; bitpos: [22]; default: 1;
|
|
|
+ * This bit is used to configure the position of carrier wave for CHANNEL0.
|
|
|
+ *
|
|
|
+ * 1'h0: add carrier wave on low level.
|
|
|
+ *
|
|
|
+ * 1'h1: add carrier wave on high level.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_OUT_LV_0 (BIT(22))
|
|
|
+#define RMT_CARRIER_OUT_LV_0_M (RMT_CARRIER_OUT_LV_0_V << RMT_CARRIER_OUT_LV_0_S)
|
|
|
+#define RMT_CARRIER_OUT_LV_0_V 0x00000001U
|
|
|
+#define RMT_CARRIER_OUT_LV_0_S 22
|
|
|
+/** RMT_AFIFO_RST_0 : WT; bitpos: [23]; default: 0;
|
|
|
+ * Reserved
|
|
|
+ */
|
|
|
+#define RMT_AFIFO_RST_0 (BIT(23))
|
|
|
+#define RMT_AFIFO_RST_0_M (RMT_AFIFO_RST_0_V << RMT_AFIFO_RST_0_S)
|
|
|
+#define RMT_AFIFO_RST_0_V 0x00000001U
|
|
|
+#define RMT_AFIFO_RST_0_S 23
|
|
|
+/** RMT_CONF_UPDATE_0 : WT; bitpos: [24]; default: 0;
|
|
|
+ * synchronization bit for CHANNEL0
|
|
|
+ */
|
|
|
+#define RMT_CONF_UPDATE_0 (BIT(24))
|
|
|
+#define RMT_CONF_UPDATE_0_M (RMT_CONF_UPDATE_0_V << RMT_CONF_UPDATE_0_S)
|
|
|
+#define RMT_CONF_UPDATE_0_V 0x00000001U
|
|
|
+#define RMT_CONF_UPDATE_0_S 24
|
|
|
|
|
|
-#define RMT_CH1CONF0_REG (DR_REG_RMT_BASE + 0x24)
|
|
|
-/* RMT_CONF_UPDATE_CH1 : WT ;bitpos:[24] ;default: 1'b0 ; */
|
|
|
-/*description: synchronization bit for CHANNEL$n.*/
|
|
|
-#define RMT_CONF_UPDATE_CH1 (BIT(24))
|
|
|
-#define RMT_CONF_UPDATE_CH1_M (BIT(24))
|
|
|
-#define RMT_CONF_UPDATE_CH1_V 0x1
|
|
|
-#define RMT_CONF_UPDATE_CH1_S 24
|
|
|
-/* RMT_AFIFO_RST_CH1 : WT ;bitpos:[23] ;default: 1'b0 ; */
|
|
|
-/*description: Reserved.*/
|
|
|
-#define RMT_AFIFO_RST_CH1 (BIT(23))
|
|
|
-#define RMT_AFIFO_RST_CH1_M (BIT(23))
|
|
|
-#define RMT_AFIFO_RST_CH1_V 0x1
|
|
|
-#define RMT_AFIFO_RST_CH1_S 23
|
|
|
-/* RMT_CARRIER_OUT_LV_CH1 : R/W ;bitpos:[22] ;default: 1'b1 ; */
|
|
|
-/*description: This bit is used to configure the position of carrier wave for CHANNEL$n.; ; 1'h
|
|
|
-0: add carrier wave on low level.; ; 1'h1: add carrier wave on high level..*/
|
|
|
-#define RMT_CARRIER_OUT_LV_CH1 (BIT(22))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH1_M (BIT(22))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH1_V 0x1
|
|
|
-#define RMT_CARRIER_OUT_LV_CH1_S 22
|
|
|
-/* RMT_CARRIER_EN_CH1 : R/W ;bitpos:[21] ;default: 1'b1 ; */
|
|
|
-/*description: This is the carrier modulation enable-control bit for CHANNEL$n. 1: Add carrier
|
|
|
-modulation in the output signal. 0: No carrier modulation in sig_out..*/
|
|
|
-#define RMT_CARRIER_EN_CH1 (BIT(21))
|
|
|
-#define RMT_CARRIER_EN_CH1_M (BIT(21))
|
|
|
-#define RMT_CARRIER_EN_CH1_V 0x1
|
|
|
-#define RMT_CARRIER_EN_CH1_S 21
|
|
|
-/* RMT_CARRIER_EFF_EN_CH1 : R/W ;bitpos:[20] ;default: 1'b1 ; */
|
|
|
-/*description: 1: Add carrier modulation on the output signal only at the send data state for C
|
|
|
-HANNEL$n. 0: Add carrier modulation on the output signal at all state for CHANNE
|
|
|
-L$n. Only valid when RMT_CARRIER_EN_CH$n is 1..*/
|
|
|
-#define RMT_CARRIER_EFF_EN_CH1 (BIT(20))
|
|
|
-#define RMT_CARRIER_EFF_EN_CH1_M (BIT(20))
|
|
|
-#define RMT_CARRIER_EFF_EN_CH1_V 0x1
|
|
|
-#define RMT_CARRIER_EFF_EN_CH1_S 20
|
|
|
-/* RMT_MEM_SIZE_CH1 : R/W ;bitpos:[19:16] ;default: 4'h1 ; */
|
|
|
-/*description: This register is used to configure the maximum size of memory allocated to CHANN
|
|
|
-EL$n..*/
|
|
|
-#define RMT_MEM_SIZE_CH1 0x0000000F
|
|
|
-#define RMT_MEM_SIZE_CH1_M ((RMT_MEM_SIZE_CH1_V)<<(RMT_MEM_SIZE_CH1_S))
|
|
|
-#define RMT_MEM_SIZE_CH1_V 0xF
|
|
|
-#define RMT_MEM_SIZE_CH1_S 16
|
|
|
-/* RMT_DIV_CNT_CH1 : R/W ;bitpos:[15:8] ;default: 8'h2 ; */
|
|
|
-/*description: This register is used to configure the divider for clock of CHANNEL$n..*/
|
|
|
-#define RMT_DIV_CNT_CH1 0x000000FF
|
|
|
-#define RMT_DIV_CNT_CH1_M ((RMT_DIV_CNT_CH1_V)<<(RMT_DIV_CNT_CH1_S))
|
|
|
-#define RMT_DIV_CNT_CH1_V 0xFF
|
|
|
-#define RMT_DIV_CNT_CH1_S 8
|
|
|
-/* RMT_TX_STOP_CH1 : R/W/SC ;bitpos:[7] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to stop the transmitter of CHANNEL$n sending data out..*/
|
|
|
-#define RMT_TX_STOP_CH1 (BIT(7))
|
|
|
-#define RMT_TX_STOP_CH1_M (BIT(7))
|
|
|
-#define RMT_TX_STOP_CH1_V 0x1
|
|
|
-#define RMT_TX_STOP_CH1_S 7
|
|
|
-/* RMT_IDLE_OUT_EN_CH1 : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
|
-/*description: This is the output enable-control bit for CHANNEL$n in IDLE state..*/
|
|
|
-#define RMT_IDLE_OUT_EN_CH1 (BIT(6))
|
|
|
-#define RMT_IDLE_OUT_EN_CH1_M (BIT(6))
|
|
|
-#define RMT_IDLE_OUT_EN_CH1_V 0x1
|
|
|
-#define RMT_IDLE_OUT_EN_CH1_S 6
|
|
|
-/* RMT_IDLE_OUT_LV_CH1 : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
|
-/*description: This bit configures the level of output signal in CHANNEL$n when the latter is i
|
|
|
-n IDLE state..*/
|
|
|
-#define RMT_IDLE_OUT_LV_CH1 (BIT(5))
|
|
|
-#define RMT_IDLE_OUT_LV_CH1_M (BIT(5))
|
|
|
-#define RMT_IDLE_OUT_LV_CH1_V 0x1
|
|
|
-#define RMT_IDLE_OUT_LV_CH1_S 5
|
|
|
-/* RMT_MEM_TX_WRAP_EN_CH1 : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: This is the channel $n enable bit for wraparound mode: it will resume sending at
|
|
|
- the start when the data to be sent is more than its memory size..*/
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH1 (BIT(4))
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH1_M (BIT(4))
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH1_V 0x1
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH1_S 4
|
|
|
-/* RMT_TX_CONTI_MODE_CH1 : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to restart transmission from the first data to the last data in CH
|
|
|
-ANNEL$n..*/
|
|
|
-#define RMT_TX_CONTI_MODE_CH1 (BIT(3))
|
|
|
-#define RMT_TX_CONTI_MODE_CH1_M (BIT(3))
|
|
|
-#define RMT_TX_CONTI_MODE_CH1_V 0x1
|
|
|
-#define RMT_TX_CONTI_MODE_CH1_S 3
|
|
|
-/* RMT_APB_MEM_RST_CH1 : WT ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to reset W/R ram address for CHANNEL$n by accessing apb fifo..*/
|
|
|
-#define RMT_APB_MEM_RST_CH1 (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH1_M (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH1_V 0x1
|
|
|
-#define RMT_APB_MEM_RST_CH1_S 2
|
|
|
-/* RMT_MEM_RD_RST_CH1 : WT ;bitpos:[1] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to reset read ram address for CHANNEL$n by accessing transmitter..*/
|
|
|
-#define RMT_MEM_RD_RST_CH1 (BIT(1))
|
|
|
-#define RMT_MEM_RD_RST_CH1_M (BIT(1))
|
|
|
-#define RMT_MEM_RD_RST_CH1_V 0x1
|
|
|
-#define RMT_MEM_RD_RST_CH1_S 1
|
|
|
-/* RMT_TX_START_CH1 : WT ;bitpos:[0] ;default: 1'h0 ; */
|
|
|
-/*description: Set this bit to start sending data on CHANNEL$n..*/
|
|
|
-#define RMT_TX_START_CH1 (BIT(0))
|
|
|
-#define RMT_TX_START_CH1_M (BIT(0))
|
|
|
-#define RMT_TX_START_CH1_V 0x1
|
|
|
-#define RMT_TX_START_CH1_S 0
|
|
|
+/** RMT_CH1CONF0_REG register
|
|
|
+ * Channel 1 configure register 0
|
|
|
+ */
|
|
|
+#define RMT_CH1CONF0_REG (DR_REG_RMT_BASE + 0x24)
|
|
|
+/** RMT_TX_START_1 : WT; bitpos: [0]; default: 0;
|
|
|
+ * Set this bit to start sending data on CHANNEL1.
|
|
|
+ */
|
|
|
+#define RMT_TX_START_1 (BIT(0))
|
|
|
+#define RMT_TX_START_1_M (RMT_TX_START_1_V << RMT_TX_START_1_S)
|
|
|
+#define RMT_TX_START_1_V 0x00000001U
|
|
|
+#define RMT_TX_START_1_S 0
|
|
|
+/** RMT_MEM_RD_RST_1 : WT; bitpos: [1]; default: 0;
|
|
|
+ * Set this bit to reset read ram address for CHANNEL1 by accessing transmitter.
|
|
|
+ */
|
|
|
+#define RMT_MEM_RD_RST_1 (BIT(1))
|
|
|
+#define RMT_MEM_RD_RST_1_M (RMT_MEM_RD_RST_1_V << RMT_MEM_RD_RST_1_S)
|
|
|
+#define RMT_MEM_RD_RST_1_V 0x00000001U
|
|
|
+#define RMT_MEM_RD_RST_1_S 1
|
|
|
+/** RMT_APB_MEM_RST_1 : WT; bitpos: [2]; default: 0;
|
|
|
+ * Set this bit to reset W/R ram address for CHANNEL1 by accessing apb fifo.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RST_1 (BIT(2))
|
|
|
+#define RMT_APB_MEM_RST_1_M (RMT_APB_MEM_RST_1_V << RMT_APB_MEM_RST_1_S)
|
|
|
+#define RMT_APB_MEM_RST_1_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_RST_1_S 2
|
|
|
+/** RMT_TX_CONTI_MODE_1 : R/W; bitpos: [3]; default: 0;
|
|
|
+ * Set this bit to restart transmission from the first data to the last data in
|
|
|
+ * CHANNEL1.
|
|
|
+ */
|
|
|
+#define RMT_TX_CONTI_MODE_1 (BIT(3))
|
|
|
+#define RMT_TX_CONTI_MODE_1_M (RMT_TX_CONTI_MODE_1_V << RMT_TX_CONTI_MODE_1_S)
|
|
|
+#define RMT_TX_CONTI_MODE_1_V 0x00000001U
|
|
|
+#define RMT_TX_CONTI_MODE_1_S 3
|
|
|
+/** RMT_MEM_TX_WRAP_EN_1 : R/W; bitpos: [4]; default: 0;
|
|
|
+ * This is the channel 1 enable bit for wraparound mode: it will resume sending at the
|
|
|
+ * start when the data to be sent is more than its memory size.
|
|
|
+ */
|
|
|
+#define RMT_MEM_TX_WRAP_EN_1 (BIT(4))
|
|
|
+#define RMT_MEM_TX_WRAP_EN_1_M (RMT_MEM_TX_WRAP_EN_1_V << RMT_MEM_TX_WRAP_EN_1_S)
|
|
|
+#define RMT_MEM_TX_WRAP_EN_1_V 0x00000001U
|
|
|
+#define RMT_MEM_TX_WRAP_EN_1_S 4
|
|
|
+/** RMT_IDLE_OUT_LV_1 : R/W; bitpos: [5]; default: 0;
|
|
|
+ * This bit configures the level of output signal in CHANNEL1 when the latter is in
|
|
|
+ * IDLE state.
|
|
|
+ */
|
|
|
+#define RMT_IDLE_OUT_LV_1 (BIT(5))
|
|
|
+#define RMT_IDLE_OUT_LV_1_M (RMT_IDLE_OUT_LV_1_V << RMT_IDLE_OUT_LV_1_S)
|
|
|
+#define RMT_IDLE_OUT_LV_1_V 0x00000001U
|
|
|
+#define RMT_IDLE_OUT_LV_1_S 5
|
|
|
+/** RMT_IDLE_OUT_EN_1 : R/W; bitpos: [6]; default: 0;
|
|
|
+ * This is the output enable-control bit for CHANNEL1 in IDLE state.
|
|
|
+ */
|
|
|
+#define RMT_IDLE_OUT_EN_1 (BIT(6))
|
|
|
+#define RMT_IDLE_OUT_EN_1_M (RMT_IDLE_OUT_EN_1_V << RMT_IDLE_OUT_EN_1_S)
|
|
|
+#define RMT_IDLE_OUT_EN_1_V 0x00000001U
|
|
|
+#define RMT_IDLE_OUT_EN_1_S 6
|
|
|
+/** RMT_TX_STOP_1 : R/W/SC; bitpos: [7]; default: 0;
|
|
|
+ * Set this bit to stop the transmitter of CHANNEL1 sending data out.
|
|
|
+ */
|
|
|
+#define RMT_TX_STOP_1 (BIT(7))
|
|
|
+#define RMT_TX_STOP_1_M (RMT_TX_STOP_1_V << RMT_TX_STOP_1_S)
|
|
|
+#define RMT_TX_STOP_1_V 0x00000001U
|
|
|
+#define RMT_TX_STOP_1_S 7
|
|
|
+/** RMT_DIV_CNT_1 : R/W; bitpos: [15:8]; default: 2;
|
|
|
+ * This register is used to configure the divider for clock of CHANNEL1.
|
|
|
+ */
|
|
|
+#define RMT_DIV_CNT_1 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_1_M (RMT_DIV_CNT_1_V << RMT_DIV_CNT_1_S)
|
|
|
+#define RMT_DIV_CNT_1_V 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_1_S 8
|
|
|
+/** RMT_MEM_SIZE_1 : R/W; bitpos: [19:16]; default: 1;
|
|
|
+ * This register is used to configure the maximum size of memory allocated to CHANNEL1.
|
|
|
+ */
|
|
|
+#define RMT_MEM_SIZE_1 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_1_M (RMT_MEM_SIZE_1_V << RMT_MEM_SIZE_1_S)
|
|
|
+#define RMT_MEM_SIZE_1_V 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_1_S 16
|
|
|
+/** RMT_CARRIER_EFF_EN_1 : R/W; bitpos: [20]; default: 1;
|
|
|
+ * 1: Add carrier modulation on the output signal only at the send data state for
|
|
|
+ * CHANNEL1. 0: Add carrier modulation on the output signal at all state for CHANNEL1.
|
|
|
+ * Only valid when RMT_CARRIER_EN_CH1 is 1.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_EFF_EN_1 (BIT(20))
|
|
|
+#define RMT_CARRIER_EFF_EN_1_M (RMT_CARRIER_EFF_EN_1_V << RMT_CARRIER_EFF_EN_1_S)
|
|
|
+#define RMT_CARRIER_EFF_EN_1_V 0x00000001U
|
|
|
+#define RMT_CARRIER_EFF_EN_1_S 20
|
|
|
+/** RMT_CARRIER_EN_1 : R/W; bitpos: [21]; default: 1;
|
|
|
+ * This is the carrier modulation enable-control bit for CHANNEL1. 1: Add carrier
|
|
|
+ * modulation in the output signal. 0: No carrier modulation in sig_out.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_EN_1 (BIT(21))
|
|
|
+#define RMT_CARRIER_EN_1_M (RMT_CARRIER_EN_1_V << RMT_CARRIER_EN_1_S)
|
|
|
+#define RMT_CARRIER_EN_1_V 0x00000001U
|
|
|
+#define RMT_CARRIER_EN_1_S 21
|
|
|
+/** RMT_CARRIER_OUT_LV_1 : R/W; bitpos: [22]; default: 1;
|
|
|
+ * This bit is used to configure the position of carrier wave for CHANNEL1.
|
|
|
+ *
|
|
|
+ * 1'h0: add carrier wave on low level.
|
|
|
+ *
|
|
|
+ * 1'h1: add carrier wave on high level.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_OUT_LV_1 (BIT(22))
|
|
|
+#define RMT_CARRIER_OUT_LV_1_M (RMT_CARRIER_OUT_LV_1_V << RMT_CARRIER_OUT_LV_1_S)
|
|
|
+#define RMT_CARRIER_OUT_LV_1_V 0x00000001U
|
|
|
+#define RMT_CARRIER_OUT_LV_1_S 22
|
|
|
+/** RMT_AFIFO_RST_1 : WT; bitpos: [23]; default: 0;
|
|
|
+ * Reserved
|
|
|
+ */
|
|
|
+#define RMT_AFIFO_RST_1 (BIT(23))
|
|
|
+#define RMT_AFIFO_RST_1_M (RMT_AFIFO_RST_1_V << RMT_AFIFO_RST_1_S)
|
|
|
+#define RMT_AFIFO_RST_1_V 0x00000001U
|
|
|
+#define RMT_AFIFO_RST_1_S 23
|
|
|
+/** RMT_CONF_UPDATE_1 : WT; bitpos: [24]; default: 0;
|
|
|
+ * synchronization bit for CHANNEL1
|
|
|
+ */
|
|
|
+#define RMT_CONF_UPDATE_1 (BIT(24))
|
|
|
+#define RMT_CONF_UPDATE_1_M (RMT_CONF_UPDATE_1_V << RMT_CONF_UPDATE_1_S)
|
|
|
+#define RMT_CONF_UPDATE_1_V 0x00000001U
|
|
|
+#define RMT_CONF_UPDATE_1_S 24
|
|
|
|
|
|
-#define RMT_CH2CONF0_REG (DR_REG_RMT_BASE + 0x28)
|
|
|
-/* RMT_CONF_UPDATE_CH2 : WT ;bitpos:[24] ;default: 1'b0 ; */
|
|
|
-/*description: synchronization bit for CHANNEL$n.*/
|
|
|
-#define RMT_CONF_UPDATE_CH2 (BIT(24))
|
|
|
-#define RMT_CONF_UPDATE_CH2_M (BIT(24))
|
|
|
-#define RMT_CONF_UPDATE_CH2_V 0x1
|
|
|
-#define RMT_CONF_UPDATE_CH2_S 24
|
|
|
-/* RMT_AFIFO_RST_CH2 : WT ;bitpos:[23] ;default: 1'b0 ; */
|
|
|
-/*description: Reserved.*/
|
|
|
-#define RMT_AFIFO_RST_CH2 (BIT(23))
|
|
|
-#define RMT_AFIFO_RST_CH2_M (BIT(23))
|
|
|
-#define RMT_AFIFO_RST_CH2_V 0x1
|
|
|
-#define RMT_AFIFO_RST_CH2_S 23
|
|
|
-/* RMT_CARRIER_OUT_LV_CH2 : R/W ;bitpos:[22] ;default: 1'b1 ; */
|
|
|
-/*description: This bit is used to configure the position of carrier wave for CHANNEL$n.; ; 1'h
|
|
|
-0: add carrier wave on low level.; ; 1'h1: add carrier wave on high level..*/
|
|
|
-#define RMT_CARRIER_OUT_LV_CH2 (BIT(22))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH2_M (BIT(22))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH2_V 0x1
|
|
|
-#define RMT_CARRIER_OUT_LV_CH2_S 22
|
|
|
-/* RMT_CARRIER_EN_CH2 : R/W ;bitpos:[21] ;default: 1'b1 ; */
|
|
|
-/*description: This is the carrier modulation enable-control bit for CHANNEL$n. 1: Add carrier
|
|
|
-modulation in the output signal. 0: No carrier modulation in sig_out..*/
|
|
|
-#define RMT_CARRIER_EN_CH2 (BIT(21))
|
|
|
-#define RMT_CARRIER_EN_CH2_M (BIT(21))
|
|
|
-#define RMT_CARRIER_EN_CH2_V 0x1
|
|
|
-#define RMT_CARRIER_EN_CH2_S 21
|
|
|
-/* RMT_CARRIER_EFF_EN_CH2 : R/W ;bitpos:[20] ;default: 1'b1 ; */
|
|
|
-/*description: 1: Add carrier modulation on the output signal only at the send data state for C
|
|
|
-HANNEL$n. 0: Add carrier modulation on the output signal at all state for CHANNE
|
|
|
-L$n. Only valid when RMT_CARRIER_EN_CH$n is 1..*/
|
|
|
-#define RMT_CARRIER_EFF_EN_CH2 (BIT(20))
|
|
|
-#define RMT_CARRIER_EFF_EN_CH2_M (BIT(20))
|
|
|
-#define RMT_CARRIER_EFF_EN_CH2_V 0x1
|
|
|
-#define RMT_CARRIER_EFF_EN_CH2_S 20
|
|
|
-/* RMT_MEM_SIZE_CH2 : R/W ;bitpos:[19:16] ;default: 4'h1 ; */
|
|
|
-/*description: This register is used to configure the maximum size of memory allocated to CHANN
|
|
|
-EL$n..*/
|
|
|
-#define RMT_MEM_SIZE_CH2 0x0000000F
|
|
|
-#define RMT_MEM_SIZE_CH2_M ((RMT_MEM_SIZE_CH2_V)<<(RMT_MEM_SIZE_CH2_S))
|
|
|
-#define RMT_MEM_SIZE_CH2_V 0xF
|
|
|
-#define RMT_MEM_SIZE_CH2_S 16
|
|
|
-/* RMT_DIV_CNT_CH2 : R/W ;bitpos:[15:8] ;default: 8'h2 ; */
|
|
|
-/*description: This register is used to configure the divider for clock of CHANNEL$n..*/
|
|
|
-#define RMT_DIV_CNT_CH2 0x000000FF
|
|
|
-#define RMT_DIV_CNT_CH2_M ((RMT_DIV_CNT_CH2_V)<<(RMT_DIV_CNT_CH2_S))
|
|
|
-#define RMT_DIV_CNT_CH2_V 0xFF
|
|
|
-#define RMT_DIV_CNT_CH2_S 8
|
|
|
-/* RMT_TX_STOP_CH2 : R/W/SC ;bitpos:[7] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to stop the transmitter of CHANNEL$n sending data out..*/
|
|
|
-#define RMT_TX_STOP_CH2 (BIT(7))
|
|
|
-#define RMT_TX_STOP_CH2_M (BIT(7))
|
|
|
-#define RMT_TX_STOP_CH2_V 0x1
|
|
|
-#define RMT_TX_STOP_CH2_S 7
|
|
|
-/* RMT_IDLE_OUT_EN_CH2 : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
|
-/*description: This is the output enable-control bit for CHANNEL$n in IDLE state..*/
|
|
|
-#define RMT_IDLE_OUT_EN_CH2 (BIT(6))
|
|
|
-#define RMT_IDLE_OUT_EN_CH2_M (BIT(6))
|
|
|
-#define RMT_IDLE_OUT_EN_CH2_V 0x1
|
|
|
-#define RMT_IDLE_OUT_EN_CH2_S 6
|
|
|
-/* RMT_IDLE_OUT_LV_CH2 : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
|
-/*description: This bit configures the level of output signal in CHANNEL$n when the latter is i
|
|
|
-n IDLE state..*/
|
|
|
-#define RMT_IDLE_OUT_LV_CH2 (BIT(5))
|
|
|
-#define RMT_IDLE_OUT_LV_CH2_M (BIT(5))
|
|
|
-#define RMT_IDLE_OUT_LV_CH2_V 0x1
|
|
|
-#define RMT_IDLE_OUT_LV_CH2_S 5
|
|
|
-/* RMT_MEM_TX_WRAP_EN_CH2 : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: This is the channel $n enable bit for wraparound mode: it will resume sending at
|
|
|
- the start when the data to be sent is more than its memory size..*/
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH2 (BIT(4))
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH2_M (BIT(4))
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH2_V 0x1
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH2_S 4
|
|
|
-/* RMT_TX_CONTI_MODE_CH2 : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to restart transmission from the first data to the last data in CH
|
|
|
-ANNEL$n..*/
|
|
|
-#define RMT_TX_CONTI_MODE_CH2 (BIT(3))
|
|
|
-#define RMT_TX_CONTI_MODE_CH2_M (BIT(3))
|
|
|
-#define RMT_TX_CONTI_MODE_CH2_V 0x1
|
|
|
-#define RMT_TX_CONTI_MODE_CH2_S 3
|
|
|
-/* RMT_APB_MEM_RST_CH2 : WT ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to reset W/R ram address for CHANNEL$n by accessing apb fifo..*/
|
|
|
-#define RMT_APB_MEM_RST_CH2 (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH2_M (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH2_V 0x1
|
|
|
-#define RMT_APB_MEM_RST_CH2_S 2
|
|
|
-/* RMT_MEM_RD_RST_CH2 : WT ;bitpos:[1] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to reset read ram address for CHANNEL$n by accessing transmitter..*/
|
|
|
-#define RMT_MEM_RD_RST_CH2 (BIT(1))
|
|
|
-#define RMT_MEM_RD_RST_CH2_M (BIT(1))
|
|
|
-#define RMT_MEM_RD_RST_CH2_V 0x1
|
|
|
-#define RMT_MEM_RD_RST_CH2_S 1
|
|
|
-/* RMT_TX_START_CH2 : WT ;bitpos:[0] ;default: 1'h0 ; */
|
|
|
-/*description: Set this bit to start sending data on CHANNEL$n..*/
|
|
|
-#define RMT_TX_START_CH2 (BIT(0))
|
|
|
-#define RMT_TX_START_CH2_M (BIT(0))
|
|
|
-#define RMT_TX_START_CH2_V 0x1
|
|
|
-#define RMT_TX_START_CH2_S 0
|
|
|
+/** RMT_CH2CONF0_REG register
|
|
|
+ * Channel 2 configure register 0
|
|
|
+ */
|
|
|
+#define RMT_CH2CONF0_REG (DR_REG_RMT_BASE + 0x28)
|
|
|
+/** RMT_TX_START_2 : WT; bitpos: [0]; default: 0;
|
|
|
+ * Set this bit to start sending data on CHANNEL2.
|
|
|
+ */
|
|
|
+#define RMT_TX_START_2 (BIT(0))
|
|
|
+#define RMT_TX_START_2_M (RMT_TX_START_2_V << RMT_TX_START_2_S)
|
|
|
+#define RMT_TX_START_2_V 0x00000001U
|
|
|
+#define RMT_TX_START_2_S 0
|
|
|
+/** RMT_MEM_RD_RST_2 : WT; bitpos: [1]; default: 0;
|
|
|
+ * Set this bit to reset read ram address for CHANNEL2 by accessing transmitter.
|
|
|
+ */
|
|
|
+#define RMT_MEM_RD_RST_2 (BIT(1))
|
|
|
+#define RMT_MEM_RD_RST_2_M (RMT_MEM_RD_RST_2_V << RMT_MEM_RD_RST_2_S)
|
|
|
+#define RMT_MEM_RD_RST_2_V 0x00000001U
|
|
|
+#define RMT_MEM_RD_RST_2_S 1
|
|
|
+/** RMT_APB_MEM_RST_2 : WT; bitpos: [2]; default: 0;
|
|
|
+ * Set this bit to reset W/R ram address for CHANNEL2 by accessing apb fifo.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RST_2 (BIT(2))
|
|
|
+#define RMT_APB_MEM_RST_2_M (RMT_APB_MEM_RST_2_V << RMT_APB_MEM_RST_2_S)
|
|
|
+#define RMT_APB_MEM_RST_2_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_RST_2_S 2
|
|
|
+/** RMT_TX_CONTI_MODE_2 : R/W; bitpos: [3]; default: 0;
|
|
|
+ * Set this bit to restart transmission from the first data to the last data in
|
|
|
+ * CHANNEL2.
|
|
|
+ */
|
|
|
+#define RMT_TX_CONTI_MODE_2 (BIT(3))
|
|
|
+#define RMT_TX_CONTI_MODE_2_M (RMT_TX_CONTI_MODE_2_V << RMT_TX_CONTI_MODE_2_S)
|
|
|
+#define RMT_TX_CONTI_MODE_2_V 0x00000001U
|
|
|
+#define RMT_TX_CONTI_MODE_2_S 3
|
|
|
+/** RMT_MEM_TX_WRAP_EN_2 : R/W; bitpos: [4]; default: 0;
|
|
|
+ * This is the channel 2 enable bit for wraparound mode: it will resume sending at the
|
|
|
+ * start when the data to be sent is more than its memory size.
|
|
|
+ */
|
|
|
+#define RMT_MEM_TX_WRAP_EN_2 (BIT(4))
|
|
|
+#define RMT_MEM_TX_WRAP_EN_2_M (RMT_MEM_TX_WRAP_EN_2_V << RMT_MEM_TX_WRAP_EN_2_S)
|
|
|
+#define RMT_MEM_TX_WRAP_EN_2_V 0x00000001U
|
|
|
+#define RMT_MEM_TX_WRAP_EN_2_S 4
|
|
|
+/** RMT_IDLE_OUT_LV_2 : R/W; bitpos: [5]; default: 0;
|
|
|
+ * This bit configures the level of output signal in CHANNEL2 when the latter is in
|
|
|
+ * IDLE state.
|
|
|
+ */
|
|
|
+#define RMT_IDLE_OUT_LV_2 (BIT(5))
|
|
|
+#define RMT_IDLE_OUT_LV_2_M (RMT_IDLE_OUT_LV_2_V << RMT_IDLE_OUT_LV_2_S)
|
|
|
+#define RMT_IDLE_OUT_LV_2_V 0x00000001U
|
|
|
+#define RMT_IDLE_OUT_LV_2_S 5
|
|
|
+/** RMT_IDLE_OUT_EN_2 : R/W; bitpos: [6]; default: 0;
|
|
|
+ * This is the output enable-control bit for CHANNEL2 in IDLE state.
|
|
|
+ */
|
|
|
+#define RMT_IDLE_OUT_EN_2 (BIT(6))
|
|
|
+#define RMT_IDLE_OUT_EN_2_M (RMT_IDLE_OUT_EN_2_V << RMT_IDLE_OUT_EN_2_S)
|
|
|
+#define RMT_IDLE_OUT_EN_2_V 0x00000001U
|
|
|
+#define RMT_IDLE_OUT_EN_2_S 6
|
|
|
+/** RMT_TX_STOP_2 : R/W/SC; bitpos: [7]; default: 0;
|
|
|
+ * Set this bit to stop the transmitter of CHANNEL2 sending data out.
|
|
|
+ */
|
|
|
+#define RMT_TX_STOP_2 (BIT(7))
|
|
|
+#define RMT_TX_STOP_2_M (RMT_TX_STOP_2_V << RMT_TX_STOP_2_S)
|
|
|
+#define RMT_TX_STOP_2_V 0x00000001U
|
|
|
+#define RMT_TX_STOP_2_S 7
|
|
|
+/** RMT_DIV_CNT_2 : R/W; bitpos: [15:8]; default: 2;
|
|
|
+ * This register is used to configure the divider for clock of CHANNEL2.
|
|
|
+ */
|
|
|
+#define RMT_DIV_CNT_2 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_2_M (RMT_DIV_CNT_2_V << RMT_DIV_CNT_2_S)
|
|
|
+#define RMT_DIV_CNT_2_V 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_2_S 8
|
|
|
+/** RMT_MEM_SIZE_2 : R/W; bitpos: [19:16]; default: 1;
|
|
|
+ * This register is used to configure the maximum size of memory allocated to CHANNEL2.
|
|
|
+ */
|
|
|
+#define RMT_MEM_SIZE_2 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_2_M (RMT_MEM_SIZE_2_V << RMT_MEM_SIZE_2_S)
|
|
|
+#define RMT_MEM_SIZE_2_V 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_2_S 16
|
|
|
+/** RMT_CARRIER_EFF_EN_2 : R/W; bitpos: [20]; default: 1;
|
|
|
+ * 1: Add carrier modulation on the output signal only at the send data state for
|
|
|
+ * CHANNEL2. 0: Add carrier modulation on the output signal at all state for CHANNEL2.
|
|
|
+ * Only valid when RMT_CARRIER_EN_CH2 is 1.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_EFF_EN_2 (BIT(20))
|
|
|
+#define RMT_CARRIER_EFF_EN_2_M (RMT_CARRIER_EFF_EN_2_V << RMT_CARRIER_EFF_EN_2_S)
|
|
|
+#define RMT_CARRIER_EFF_EN_2_V 0x00000001U
|
|
|
+#define RMT_CARRIER_EFF_EN_2_S 20
|
|
|
+/** RMT_CARRIER_EN_2 : R/W; bitpos: [21]; default: 1;
|
|
|
+ * This is the carrier modulation enable-control bit for CHANNEL2. 1: Add carrier
|
|
|
+ * modulation in the output signal. 0: No carrier modulation in sig_out.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_EN_2 (BIT(21))
|
|
|
+#define RMT_CARRIER_EN_2_M (RMT_CARRIER_EN_2_V << RMT_CARRIER_EN_2_S)
|
|
|
+#define RMT_CARRIER_EN_2_V 0x00000001U
|
|
|
+#define RMT_CARRIER_EN_2_S 21
|
|
|
+/** RMT_CARRIER_OUT_LV_2 : R/W; bitpos: [22]; default: 1;
|
|
|
+ * This bit is used to configure the position of carrier wave for CHANNEL2.
|
|
|
+ *
|
|
|
+ * 1'h0: add carrier wave on low level.
|
|
|
+ *
|
|
|
+ * 1'h1: add carrier wave on high level.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_OUT_LV_2 (BIT(22))
|
|
|
+#define RMT_CARRIER_OUT_LV_2_M (RMT_CARRIER_OUT_LV_2_V << RMT_CARRIER_OUT_LV_2_S)
|
|
|
+#define RMT_CARRIER_OUT_LV_2_V 0x00000001U
|
|
|
+#define RMT_CARRIER_OUT_LV_2_S 22
|
|
|
+/** RMT_AFIFO_RST_2 : WT; bitpos: [23]; default: 0;
|
|
|
+ * Reserved
|
|
|
+ */
|
|
|
+#define RMT_AFIFO_RST_2 (BIT(23))
|
|
|
+#define RMT_AFIFO_RST_2_M (RMT_AFIFO_RST_2_V << RMT_AFIFO_RST_2_S)
|
|
|
+#define RMT_AFIFO_RST_2_V 0x00000001U
|
|
|
+#define RMT_AFIFO_RST_2_S 23
|
|
|
+/** RMT_CONF_UPDATE_2 : WT; bitpos: [24]; default: 0;
|
|
|
+ * synchronization bit for CHANNEL2
|
|
|
+ */
|
|
|
+#define RMT_CONF_UPDATE_2 (BIT(24))
|
|
|
+#define RMT_CONF_UPDATE_2_M (RMT_CONF_UPDATE_2_V << RMT_CONF_UPDATE_2_S)
|
|
|
+#define RMT_CONF_UPDATE_2_V 0x00000001U
|
|
|
+#define RMT_CONF_UPDATE_2_S 24
|
|
|
|
|
|
-#define RMT_CH3CONF0_REG (DR_REG_RMT_BASE + 0x2C)
|
|
|
-/* RMT_DMA_ACCESS_EN_CH3 : R/W ;bitpos:[25] ;default: 1'b0 ; */
|
|
|
-/*description: This bit is used to enable the dma access function for CHANNEL$n..*/
|
|
|
-#define RMT_DMA_ACCESS_EN_CH3 (BIT(25))
|
|
|
-#define RMT_DMA_ACCESS_EN_CH3_M (BIT(25))
|
|
|
-#define RMT_DMA_ACCESS_EN_CH3_V 0x1
|
|
|
-#define RMT_DMA_ACCESS_EN_CH3_S 25
|
|
|
-/* RMT_CONF_UPDATE_CH3 : WT ;bitpos:[24] ;default: 1'b0 ; */
|
|
|
-/*description: synchronization bit for CHANNEL$n.*/
|
|
|
-#define RMT_CONF_UPDATE_CH3 (BIT(24))
|
|
|
-#define RMT_CONF_UPDATE_CH3_M (BIT(24))
|
|
|
-#define RMT_CONF_UPDATE_CH3_V 0x1
|
|
|
-#define RMT_CONF_UPDATE_CH3_S 24
|
|
|
-/* RMT_AFIFO_RST_CH3 : WT ;bitpos:[23] ;default: 1'b0 ; */
|
|
|
-/*description: Reserved.*/
|
|
|
-#define RMT_AFIFO_RST_CH3 (BIT(23))
|
|
|
-#define RMT_AFIFO_RST_CH3_M (BIT(23))
|
|
|
-#define RMT_AFIFO_RST_CH3_V 0x1
|
|
|
-#define RMT_AFIFO_RST_CH3_S 23
|
|
|
-/* RMT_CARRIER_OUT_LV_CH3 : R/W ;bitpos:[22] ;default: 1'b1 ; */
|
|
|
-/*description: This bit is used to configure the position of carrier wave for CHANNEL$n.; ; 1'h
|
|
|
-0: add carrier wave on low level.; ; 1'h1: add carrier wave on high level..*/
|
|
|
-#define RMT_CARRIER_OUT_LV_CH3 (BIT(22))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH3_M (BIT(22))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH3_V 0x1
|
|
|
-#define RMT_CARRIER_OUT_LV_CH3_S 22
|
|
|
-/* RMT_CARRIER_EN_CH3 : R/W ;bitpos:[21] ;default: 1'b1 ; */
|
|
|
-/*description: This is the carrier modulation enable-control bit for CHANNEL$n. 1: Add carrier
|
|
|
-modulation in the output signal. 0: No carrier modulation in sig_out..*/
|
|
|
-#define RMT_CARRIER_EN_CH3 (BIT(21))
|
|
|
-#define RMT_CARRIER_EN_CH3_M (BIT(21))
|
|
|
-#define RMT_CARRIER_EN_CH3_V 0x1
|
|
|
-#define RMT_CARRIER_EN_CH3_S 21
|
|
|
-/* RMT_CARRIER_EFF_EN_CH3 : R/W ;bitpos:[20] ;default: 1'b1 ; */
|
|
|
-/*description: 1: Add carrier modulation on the output signal only at the send data state for C
|
|
|
-HANNEL$n. 0: Add carrier modulation on the output signal at all state for CHANNE
|
|
|
-L$n. Only valid when RMT_CARRIER_EN_CH$n is 1..*/
|
|
|
-#define RMT_CARRIER_EFF_EN_CH3 (BIT(20))
|
|
|
-#define RMT_CARRIER_EFF_EN_CH3_M (BIT(20))
|
|
|
-#define RMT_CARRIER_EFF_EN_CH3_V 0x1
|
|
|
-#define RMT_CARRIER_EFF_EN_CH3_S 20
|
|
|
-/* RMT_MEM_SIZE_CH3 : R/W ;bitpos:[19:16] ;default: 4'h1 ; */
|
|
|
-/*description: This register is used to configure the maximum size of memory allocated to CHANN
|
|
|
-EL$n..*/
|
|
|
-#define RMT_MEM_SIZE_CH3 0x0000000F
|
|
|
-#define RMT_MEM_SIZE_CH3_M ((RMT_MEM_SIZE_CH3_V)<<(RMT_MEM_SIZE_CH3_S))
|
|
|
-#define RMT_MEM_SIZE_CH3_V 0xF
|
|
|
-#define RMT_MEM_SIZE_CH3_S 16
|
|
|
-/* RMT_DIV_CNT_CH3 : R/W ;bitpos:[15:8] ;default: 8'h2 ; */
|
|
|
-/*description: This register is used to configure the divider for clock of CHANNEL$n..*/
|
|
|
-#define RMT_DIV_CNT_CH3 0x000000FF
|
|
|
-#define RMT_DIV_CNT_CH3_M ((RMT_DIV_CNT_CH3_V)<<(RMT_DIV_CNT_CH3_S))
|
|
|
-#define RMT_DIV_CNT_CH3_V 0xFF
|
|
|
-#define RMT_DIV_CNT_CH3_S 8
|
|
|
-/* RMT_TX_STOP_CH3 : R/W/SC ;bitpos:[7] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to stop the transmitter of CHANNEL$n sending data out..*/
|
|
|
-#define RMT_TX_STOP_CH3 (BIT(7))
|
|
|
-#define RMT_TX_STOP_CH3_M (BIT(7))
|
|
|
-#define RMT_TX_STOP_CH3_V 0x1
|
|
|
-#define RMT_TX_STOP_CH3_S 7
|
|
|
-/* RMT_IDLE_OUT_EN_CH3 : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
|
-/*description: This is the output enable-control bit for CHANNEL$n in IDLE state..*/
|
|
|
-#define RMT_IDLE_OUT_EN_CH3 (BIT(6))
|
|
|
-#define RMT_IDLE_OUT_EN_CH3_M (BIT(6))
|
|
|
-#define RMT_IDLE_OUT_EN_CH3_V 0x1
|
|
|
-#define RMT_IDLE_OUT_EN_CH3_S 6
|
|
|
-/* RMT_IDLE_OUT_LV_CH3 : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
|
-/*description: This bit configures the level of output signal in CHANNEL$n when the latter is i
|
|
|
-n IDLE state..*/
|
|
|
-#define RMT_IDLE_OUT_LV_CH3 (BIT(5))
|
|
|
-#define RMT_IDLE_OUT_LV_CH3_M (BIT(5))
|
|
|
-#define RMT_IDLE_OUT_LV_CH3_V 0x1
|
|
|
-#define RMT_IDLE_OUT_LV_CH3_S 5
|
|
|
-/* RMT_MEM_TX_WRAP_EN_CH3 : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: This is the channel $n enable bit for wraparound mode: it will resume sending at
|
|
|
- the start when the data to be sent is more than its memory size..*/
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH3 (BIT(4))
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH3_M (BIT(4))
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH3_V 0x1
|
|
|
-#define RMT_MEM_TX_WRAP_EN_CH3_S 4
|
|
|
-/* RMT_TX_CONTI_MODE_CH3 : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to restart transmission from the first data to the last data in CH
|
|
|
-ANNEL$n..*/
|
|
|
-#define RMT_TX_CONTI_MODE_CH3 (BIT(3))
|
|
|
-#define RMT_TX_CONTI_MODE_CH3_M (BIT(3))
|
|
|
-#define RMT_TX_CONTI_MODE_CH3_V 0x1
|
|
|
-#define RMT_TX_CONTI_MODE_CH3_S 3
|
|
|
-/* RMT_APB_MEM_RST_CH3 : WT ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to reset W/R ram address for CHANNEL$n by accessing apb fifo..*/
|
|
|
-#define RMT_APB_MEM_RST_CH3 (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH3_M (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH3_V 0x1
|
|
|
-#define RMT_APB_MEM_RST_CH3_S 2
|
|
|
-/* RMT_MEM_RD_RST_CH3 : WT ;bitpos:[1] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to reset read ram address for CHANNEL$n by accessing transmitter..*/
|
|
|
-#define RMT_MEM_RD_RST_CH3 (BIT(1))
|
|
|
-#define RMT_MEM_RD_RST_CH3_M (BIT(1))
|
|
|
-#define RMT_MEM_RD_RST_CH3_V 0x1
|
|
|
-#define RMT_MEM_RD_RST_CH3_S 1
|
|
|
-/* RMT_TX_START_CH3 : WT ;bitpos:[0] ;default: 1'h0 ; */
|
|
|
-/*description: Set this bit to start sending data on CHANNEL$n..*/
|
|
|
-#define RMT_TX_START_CH3 (BIT(0))
|
|
|
-#define RMT_TX_START_CH3_M (BIT(0))
|
|
|
-#define RMT_TX_START_CH3_V 0x1
|
|
|
-#define RMT_TX_START_CH3_S 0
|
|
|
+/** RMT_CH3CONF0_REG register
|
|
|
+ * Channel 3 configure register 0
|
|
|
+ */
|
|
|
+#define RMT_CH3CONF0_REG (DR_REG_RMT_BASE + 0x2c)
|
|
|
+/** RMT_TX_START_3 : WT; bitpos: [0]; default: 0;
|
|
|
+ * Set this bit to start sending data on CHANNEL3.
|
|
|
+ */
|
|
|
+#define RMT_TX_START_3 (BIT(0))
|
|
|
+#define RMT_TX_START_3_M (RMT_TX_START_3_V << RMT_TX_START_3_S)
|
|
|
+#define RMT_TX_START_3_V 0x00000001U
|
|
|
+#define RMT_TX_START_3_S 0
|
|
|
+/** RMT_MEM_RD_RST_3 : WT; bitpos: [1]; default: 0;
|
|
|
+ * Set this bit to reset read ram address for CHANNEL3 by accessing transmitter.
|
|
|
+ */
|
|
|
+#define RMT_MEM_RD_RST_3 (BIT(1))
|
|
|
+#define RMT_MEM_RD_RST_3_M (RMT_MEM_RD_RST_3_V << RMT_MEM_RD_RST_3_S)
|
|
|
+#define RMT_MEM_RD_RST_3_V 0x00000001U
|
|
|
+#define RMT_MEM_RD_RST_3_S 1
|
|
|
+/** RMT_APB_MEM_RST_3 : WT; bitpos: [2]; default: 0;
|
|
|
+ * Set this bit to reset W/R ram address for CHANNEL3 by accessing apb fifo.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RST_3 (BIT(2))
|
|
|
+#define RMT_APB_MEM_RST_3_M (RMT_APB_MEM_RST_3_V << RMT_APB_MEM_RST_3_S)
|
|
|
+#define RMT_APB_MEM_RST_3_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_RST_3_S 2
|
|
|
+/** RMT_TX_CONTI_MODE_3 : R/W; bitpos: [3]; default: 0;
|
|
|
+ * Set this bit to restart transmission from the first data to the last data in
|
|
|
+ * CHANNEL3.
|
|
|
+ */
|
|
|
+#define RMT_TX_CONTI_MODE_3 (BIT(3))
|
|
|
+#define RMT_TX_CONTI_MODE_3_M (RMT_TX_CONTI_MODE_3_V << RMT_TX_CONTI_MODE_3_S)
|
|
|
+#define RMT_TX_CONTI_MODE_3_V 0x00000001U
|
|
|
+#define RMT_TX_CONTI_MODE_3_S 3
|
|
|
+/** RMT_MEM_TX_WRAP_EN_3 : R/W; bitpos: [4]; default: 0;
|
|
|
+ * This is the channel 3 enable bit for wraparound mode: it will resume sending at the
|
|
|
+ * start when the data to be sent is more than its memory size.
|
|
|
+ */
|
|
|
+#define RMT_MEM_TX_WRAP_EN_3 (BIT(4))
|
|
|
+#define RMT_MEM_TX_WRAP_EN_3_M (RMT_MEM_TX_WRAP_EN_3_V << RMT_MEM_TX_WRAP_EN_3_S)
|
|
|
+#define RMT_MEM_TX_WRAP_EN_3_V 0x00000001U
|
|
|
+#define RMT_MEM_TX_WRAP_EN_3_S 4
|
|
|
+/** RMT_IDLE_OUT_LV_3 : R/W; bitpos: [5]; default: 0;
|
|
|
+ * This bit configures the level of output signal in CHANNEL3 when the latter is in
|
|
|
+ * IDLE state.
|
|
|
+ */
|
|
|
+#define RMT_IDLE_OUT_LV_3 (BIT(5))
|
|
|
+#define RMT_IDLE_OUT_LV_3_M (RMT_IDLE_OUT_LV_3_V << RMT_IDLE_OUT_LV_3_S)
|
|
|
+#define RMT_IDLE_OUT_LV_3_V 0x00000001U
|
|
|
+#define RMT_IDLE_OUT_LV_3_S 5
|
|
|
+/** RMT_IDLE_OUT_EN_3 : R/W; bitpos: [6]; default: 0;
|
|
|
+ * This is the output enable-control bit for CHANNEL3 in IDLE state.
|
|
|
+ */
|
|
|
+#define RMT_IDLE_OUT_EN_3 (BIT(6))
|
|
|
+#define RMT_IDLE_OUT_EN_3_M (RMT_IDLE_OUT_EN_3_V << RMT_IDLE_OUT_EN_3_S)
|
|
|
+#define RMT_IDLE_OUT_EN_3_V 0x00000001U
|
|
|
+#define RMT_IDLE_OUT_EN_3_S 6
|
|
|
+/** RMT_TX_STOP_3 : R/W/SC; bitpos: [7]; default: 0;
|
|
|
+ * Set this bit to stop the transmitter of CHANNEL3 sending data out.
|
|
|
+ */
|
|
|
+#define RMT_TX_STOP_3 (BIT(7))
|
|
|
+#define RMT_TX_STOP_3_M (RMT_TX_STOP_3_V << RMT_TX_STOP_3_S)
|
|
|
+#define RMT_TX_STOP_3_V 0x00000001U
|
|
|
+#define RMT_TX_STOP_3_S 7
|
|
|
+/** RMT_DIV_CNT_3 : R/W; bitpos: [15:8]; default: 2;
|
|
|
+ * This register is used to configure the divider for clock of CHANNEL3.
|
|
|
+ */
|
|
|
+#define RMT_DIV_CNT_3 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_3_M (RMT_DIV_CNT_3_V << RMT_DIV_CNT_3_S)
|
|
|
+#define RMT_DIV_CNT_3_V 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_3_S 8
|
|
|
+/** RMT_MEM_SIZE_3 : R/W; bitpos: [19:16]; default: 1;
|
|
|
+ * This register is used to configure the maximum size of memory allocated to CHANNEL3.
|
|
|
+ */
|
|
|
+#define RMT_MEM_SIZE_3 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_3_M (RMT_MEM_SIZE_3_V << RMT_MEM_SIZE_3_S)
|
|
|
+#define RMT_MEM_SIZE_3_V 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_3_S 16
|
|
|
+/** RMT_CARRIER_EFF_EN_3 : R/W; bitpos: [20]; default: 1;
|
|
|
+ * 1: Add carrier modulation on the output signal only at the send data state for
|
|
|
+ * CHANNEL3. 0: Add carrier modulation on the output signal at all state for CHANNEL3.
|
|
|
+ * Only valid when RMT_CARRIER_EN_CH3 is 1.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_EFF_EN_3 (BIT(20))
|
|
|
+#define RMT_CARRIER_EFF_EN_3_M (RMT_CARRIER_EFF_EN_3_V << RMT_CARRIER_EFF_EN_3_S)
|
|
|
+#define RMT_CARRIER_EFF_EN_3_V 0x00000001U
|
|
|
+#define RMT_CARRIER_EFF_EN_3_S 20
|
|
|
+/** RMT_CARRIER_EN_3 : R/W; bitpos: [21]; default: 1;
|
|
|
+ * This is the carrier modulation enable-control bit for CHANNEL3. 1: Add carrier
|
|
|
+ * modulation in the output signal. 0: No carrier modulation in sig_out.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_EN_3 (BIT(21))
|
|
|
+#define RMT_CARRIER_EN_3_M (RMT_CARRIER_EN_3_V << RMT_CARRIER_EN_3_S)
|
|
|
+#define RMT_CARRIER_EN_3_V 0x00000001U
|
|
|
+#define RMT_CARRIER_EN_3_S 21
|
|
|
+/** RMT_CARRIER_OUT_LV_3 : R/W; bitpos: [22]; default: 1;
|
|
|
+ * This bit is used to configure the position of carrier wave for CHANNEL3.
|
|
|
+ *
|
|
|
+ * 1'h0: add carrier wave on low level.
|
|
|
+ *
|
|
|
+ * 1'h1: add carrier wave on high level.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_OUT_LV_3 (BIT(22))
|
|
|
+#define RMT_CARRIER_OUT_LV_3_M (RMT_CARRIER_OUT_LV_3_V << RMT_CARRIER_OUT_LV_3_S)
|
|
|
+#define RMT_CARRIER_OUT_LV_3_V 0x00000001U
|
|
|
+#define RMT_CARRIER_OUT_LV_3_S 22
|
|
|
+/** RMT_AFIFO_RST_3 : WT; bitpos: [23]; default: 0;
|
|
|
+ * Reserved
|
|
|
+ */
|
|
|
+#define RMT_AFIFO_RST_3 (BIT(23))
|
|
|
+#define RMT_AFIFO_RST_3_M (RMT_AFIFO_RST_3_V << RMT_AFIFO_RST_3_S)
|
|
|
+#define RMT_AFIFO_RST_3_V 0x00000001U
|
|
|
+#define RMT_AFIFO_RST_3_S 23
|
|
|
+/** RMT_CONF_UPDATE_3 : WT; bitpos: [24]; default: 0;
|
|
|
+ * synchronization bit for CHANNEL3
|
|
|
+ */
|
|
|
+#define RMT_CONF_UPDATE_3 (BIT(24))
|
|
|
+#define RMT_CONF_UPDATE_3_M (RMT_CONF_UPDATE_3_V << RMT_CONF_UPDATE_3_S)
|
|
|
+#define RMT_CONF_UPDATE_3_V 0x00000001U
|
|
|
+#define RMT_CONF_UPDATE_3_S 24
|
|
|
|
|
|
-#define RMT_CH4CONF0_REG (DR_REG_RMT_BASE + 0x30)
|
|
|
-/* RMT_CARRIER_OUT_LV_CH4 : R/W ;bitpos:[29] ;default: 1'b1 ; */
|
|
|
-/*description: This bit is used to configure the position of carrier wave for CHANNEL$m.; ; 1'h
|
|
|
-0: add carrier wave on low level.; ; 1'h1: add carrier wave on high level..*/
|
|
|
-#define RMT_CARRIER_OUT_LV_CH4 (BIT(29))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH4_M (BIT(29))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH4_V 0x1
|
|
|
-#define RMT_CARRIER_OUT_LV_CH4_S 29
|
|
|
-/* RMT_CARRIER_EN_CH4 : R/W ;bitpos:[28] ;default: 1'b1 ; */
|
|
|
-/*description: This is the carrier modulation enable-control bit for CHANNEL$m. 1: Add carrier
|
|
|
-modulation in the output signal. 0: No carrier modulation in sig_out..*/
|
|
|
-#define RMT_CARRIER_EN_CH4 (BIT(28))
|
|
|
-#define RMT_CARRIER_EN_CH4_M (BIT(28))
|
|
|
-#define RMT_CARRIER_EN_CH4_V 0x1
|
|
|
-#define RMT_CARRIER_EN_CH4_S 28
|
|
|
-/* RMT_MEM_SIZE_CH4 : R/W ;bitpos:[27:24] ;default: 4'h1 ; */
|
|
|
-/*description: This register is used to configure the maximum size of memory allocated to CHANN
|
|
|
-EL$m..*/
|
|
|
-#define RMT_MEM_SIZE_CH4 0x0000000F
|
|
|
-#define RMT_MEM_SIZE_CH4_M ((RMT_MEM_SIZE_CH4_V)<<(RMT_MEM_SIZE_CH4_S))
|
|
|
-#define RMT_MEM_SIZE_CH4_V 0xF
|
|
|
-#define RMT_MEM_SIZE_CH4_S 24
|
|
|
-/* RMT_IDLE_THRES_CH4 : R/W ;bitpos:[22:8] ;default: 15'h7fff ; */
|
|
|
-/*description: When no edge is detected on the input signal and continuous clock cycles is long
|
|
|
-er than this register value, received process is finished..*/
|
|
|
-#define RMT_IDLE_THRES_CH4 0x00007FFF
|
|
|
-#define RMT_IDLE_THRES_CH4_M ((RMT_IDLE_THRES_CH4_V)<<(RMT_IDLE_THRES_CH4_S))
|
|
|
-#define RMT_IDLE_THRES_CH4_V 0x7FFF
|
|
|
-#define RMT_IDLE_THRES_CH4_S 8
|
|
|
-/* RMT_DIV_CNT_CH4 : R/W ;bitpos:[7:0] ;default: 8'h2 ; */
|
|
|
-/*description: This register is used to configure the divider for clock of CHANNEL$m..*/
|
|
|
-#define RMT_DIV_CNT_CH4 0x000000FF
|
|
|
-#define RMT_DIV_CNT_CH4_M ((RMT_DIV_CNT_CH4_V)<<(RMT_DIV_CNT_CH4_S))
|
|
|
-#define RMT_DIV_CNT_CH4_V 0xFF
|
|
|
-#define RMT_DIV_CNT_CH4_S 0
|
|
|
+/** RMT_CH4CONF0_REG register
|
|
|
+ * Channel 4 configure register 0
|
|
|
+ */
|
|
|
+#define RMT_CH4CONF0_REG (DR_REG_RMT_BASE + 0x30)
|
|
|
+/** RMT_DIV_CNT_4 : R/W; bitpos: [7:0]; default: 2;
|
|
|
+ * This register is used to configure the divider for clock of CHANNEL4.
|
|
|
+ */
|
|
|
+#define RMT_DIV_CNT_4 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_4_M (RMT_DIV_CNT_4_V << RMT_DIV_CNT_4_S)
|
|
|
+#define RMT_DIV_CNT_4_V 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_4_S 0
|
|
|
+/** RMT_IDLE_THRES_4 : R/W; bitpos: [22:8]; default: 32767;
|
|
|
+ * When no edge is detected on the input signal and continuous clock cycles is longer
|
|
|
+ * than this register value, received process is finished.
|
|
|
+ */
|
|
|
+#define RMT_IDLE_THRES_4 0x00007FFFU
|
|
|
+#define RMT_IDLE_THRES_4_M (RMT_IDLE_THRES_4_V << RMT_IDLE_THRES_4_S)
|
|
|
+#define RMT_IDLE_THRES_4_V 0x00007FFFU
|
|
|
+#define RMT_IDLE_THRES_4_S 8
|
|
|
+/** RMT_MEM_SIZE_4 : R/W; bitpos: [27:24]; default: 1;
|
|
|
+ * This register is used to configure the maximum size of memory allocated to CHANNEL4.
|
|
|
+ */
|
|
|
+#define RMT_MEM_SIZE_4 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_4_M (RMT_MEM_SIZE_4_V << RMT_MEM_SIZE_4_S)
|
|
|
+#define RMT_MEM_SIZE_4_V 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_4_S 24
|
|
|
+/** RMT_CARRIER_EN_4 : R/W; bitpos: [28]; default: 1;
|
|
|
+ * This is the carrier modulation enable-control bit for CHANNEL4. 1: Add carrier
|
|
|
+ * modulation in the output signal. 0: No carrier modulation in sig_out.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_EN_4 (BIT(28))
|
|
|
+#define RMT_CARRIER_EN_4_M (RMT_CARRIER_EN_4_V << RMT_CARRIER_EN_4_S)
|
|
|
+#define RMT_CARRIER_EN_4_V 0x00000001U
|
|
|
+#define RMT_CARRIER_EN_4_S 28
|
|
|
+/** RMT_CARRIER_OUT_LV_4 : R/W; bitpos: [29]; default: 1;
|
|
|
+ * This bit is used to configure the position of carrier wave for CHANNEL4.
|
|
|
+ *
|
|
|
+ * 1'h0: add carrier wave on low level.
|
|
|
+ *
|
|
|
+ * 1'h1: add carrier wave on high level.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_OUT_LV_4 (BIT(29))
|
|
|
+#define RMT_CARRIER_OUT_LV_4_M (RMT_CARRIER_OUT_LV_4_V << RMT_CARRIER_OUT_LV_4_S)
|
|
|
+#define RMT_CARRIER_OUT_LV_4_V 0x00000001U
|
|
|
+#define RMT_CARRIER_OUT_LV_4_S 29
|
|
|
|
|
|
-#define RMT_CH4CONF1_REG (DR_REG_RMT_BASE + 0x34)
|
|
|
-/* RMT_CONF_UPDATE_CH4 : WT ;bitpos:[15] ;default: 1'b0 ; */
|
|
|
-/*description: synchronization bit for CHANNEL$m.*/
|
|
|
-#define RMT_CONF_UPDATE_CH4 (BIT(15))
|
|
|
-#define RMT_CONF_UPDATE_CH4_M (BIT(15))
|
|
|
-#define RMT_CONF_UPDATE_CH4_V 0x1
|
|
|
-#define RMT_CONF_UPDATE_CH4_S 15
|
|
|
-/* RMT_AFIFO_RST_CH4 : WT ;bitpos:[14] ;default: 1'b0 ; */
|
|
|
-/*description: Reserved.*/
|
|
|
-#define RMT_AFIFO_RST_CH4 (BIT(14))
|
|
|
-#define RMT_AFIFO_RST_CH4_M (BIT(14))
|
|
|
-#define RMT_AFIFO_RST_CH4_V 0x1
|
|
|
-#define RMT_AFIFO_RST_CH4_S 14
|
|
|
-/* RMT_MEM_RX_WRAP_EN_CH4 : R/W ;bitpos:[13] ;default: 1'b0 ; */
|
|
|
-/*description: This is the channel $m enable bit for wraparound mode: it will resume receiving
|
|
|
-at the start when the data to be received is more than its memory size..*/
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH4 (BIT(13))
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH4_M (BIT(13))
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH4_V 0x1
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH4_S 13
|
|
|
-/* RMT_RX_FILTER_THRES_CH4 : R/W ;bitpos:[12:5] ;default: 8'hf ; */
|
|
|
-/*description: Ignores the input pulse when its width is smaller than this register value in AP
|
|
|
-B clock periods (in receive mode)..*/
|
|
|
-#define RMT_RX_FILTER_THRES_CH4 0x000000FF
|
|
|
-#define RMT_RX_FILTER_THRES_CH4_M ((RMT_RX_FILTER_THRES_CH4_V)<<(RMT_RX_FILTER_THRES_CH4_S))
|
|
|
-#define RMT_RX_FILTER_THRES_CH4_V 0xFF
|
|
|
-#define RMT_RX_FILTER_THRES_CH4_S 5
|
|
|
-/* RMT_RX_FILTER_EN_CH4 : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: This is the receive filter's enable bit for CHANNEL$m..*/
|
|
|
-#define RMT_RX_FILTER_EN_CH4 (BIT(4))
|
|
|
-#define RMT_RX_FILTER_EN_CH4_M (BIT(4))
|
|
|
-#define RMT_RX_FILTER_EN_CH4_V 0x1
|
|
|
-#define RMT_RX_FILTER_EN_CH4_S 4
|
|
|
-/* RMT_MEM_OWNER_CH4 : R/W/SC ;bitpos:[3] ;default: 1'b1 ; */
|
|
|
-/*description: This register marks the ownership of CHANNEL$m's ram block.; ; 1'h1: Receiver is
|
|
|
- using the ram. ; ; 1'h0: APB bus is using the ram..*/
|
|
|
-#define RMT_MEM_OWNER_CH4 (BIT(3))
|
|
|
-#define RMT_MEM_OWNER_CH4_M (BIT(3))
|
|
|
-#define RMT_MEM_OWNER_CH4_V 0x1
|
|
|
-#define RMT_MEM_OWNER_CH4_S 3
|
|
|
-/* RMT_APB_MEM_RST_CH4 : WT ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to reset W/R ram address for CHANNEL$m by accessing apb fifo..*/
|
|
|
-#define RMT_APB_MEM_RST_CH4 (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH4_M (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH4_V 0x1
|
|
|
-#define RMT_APB_MEM_RST_CH4_S 2
|
|
|
-/* RMT_MEM_WR_RST_CH4 : WT ;bitpos:[1] ;default: 1'h0 ; */
|
|
|
-/*description: Set this bit to reset write ram address for CHANNEL$m by accessing receiver..*/
|
|
|
-#define RMT_MEM_WR_RST_CH4 (BIT(1))
|
|
|
-#define RMT_MEM_WR_RST_CH4_M (BIT(1))
|
|
|
-#define RMT_MEM_WR_RST_CH4_V 0x1
|
|
|
-#define RMT_MEM_WR_RST_CH4_S 1
|
|
|
-/* RMT_RX_EN_CH4 : R/W ;bitpos:[0] ;default: 1'h0 ; */
|
|
|
-/*description: Set this bit to enable receiver to receive data on CHANNEL$m..*/
|
|
|
-#define RMT_RX_EN_CH4 (BIT(0))
|
|
|
-#define RMT_RX_EN_CH4_M (BIT(0))
|
|
|
-#define RMT_RX_EN_CH4_V 0x1
|
|
|
-#define RMT_RX_EN_CH4_S 0
|
|
|
+/** RMT_CH4CONF1_REG register
|
|
|
+ * Channel 4 configure register 1
|
|
|
+ */
|
|
|
+#define RMT_CH4CONF1_REG (DR_REG_RMT_BASE + 0x34)
|
|
|
+/** RMT_RX_EN_4 : R/W; bitpos: [0]; default: 0;
|
|
|
+ * Set this bit to enable receiver to receive data on CHANNEL4.
|
|
|
+ */
|
|
|
+#define RMT_RX_EN_4 (BIT(0))
|
|
|
+#define RMT_RX_EN_4_M (RMT_RX_EN_4_V << RMT_RX_EN_4_S)
|
|
|
+#define RMT_RX_EN_4_V 0x00000001U
|
|
|
+#define RMT_RX_EN_4_S 0
|
|
|
+/** RMT_MEM_WR_RST_4 : WT; bitpos: [1]; default: 0;
|
|
|
+ * Set this bit to reset write ram address for CHANNEL4 by accessing receiver.
|
|
|
+ */
|
|
|
+#define RMT_MEM_WR_RST_4 (BIT(1))
|
|
|
+#define RMT_MEM_WR_RST_4_M (RMT_MEM_WR_RST_4_V << RMT_MEM_WR_RST_4_S)
|
|
|
+#define RMT_MEM_WR_RST_4_V 0x00000001U
|
|
|
+#define RMT_MEM_WR_RST_4_S 1
|
|
|
+/** RMT_APB_MEM_RST_4 : WT; bitpos: [2]; default: 0;
|
|
|
+ * Set this bit to reset W/R ram address for CHANNEL4 by accessing apb fifo.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RST_4 (BIT(2))
|
|
|
+#define RMT_APB_MEM_RST_4_M (RMT_APB_MEM_RST_4_V << RMT_APB_MEM_RST_4_S)
|
|
|
+#define RMT_APB_MEM_RST_4_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_RST_4_S 2
|
|
|
+/** RMT_MEM_OWNER_4 : R/W/SC; bitpos: [3]; default: 1;
|
|
|
+ * This register marks the ownership of CHANNEL4's ram block.
|
|
|
+ *
|
|
|
+ * 1'h1: Receiver is using the ram.
|
|
|
+ *
|
|
|
+ * 1'h0: APB bus is using the ram.
|
|
|
+ */
|
|
|
+#define RMT_MEM_OWNER_4 (BIT(3))
|
|
|
+#define RMT_MEM_OWNER_4_M (RMT_MEM_OWNER_4_V << RMT_MEM_OWNER_4_S)
|
|
|
+#define RMT_MEM_OWNER_4_V 0x00000001U
|
|
|
+#define RMT_MEM_OWNER_4_S 3
|
|
|
+/** RMT_RX_FILTER_EN_4 : R/W; bitpos: [4]; default: 0;
|
|
|
+ * This is the receive filter's enable bit for CHANNEL4.
|
|
|
+ */
|
|
|
+#define RMT_RX_FILTER_EN_4 (BIT(4))
|
|
|
+#define RMT_RX_FILTER_EN_4_M (RMT_RX_FILTER_EN_4_V << RMT_RX_FILTER_EN_4_S)
|
|
|
+#define RMT_RX_FILTER_EN_4_V 0x00000001U
|
|
|
+#define RMT_RX_FILTER_EN_4_S 4
|
|
|
+/** RMT_RX_FILTER_THRES_4 : R/W; bitpos: [12:5]; default: 15;
|
|
|
+ * Ignores the input pulse when its width is smaller than this register value in APB
|
|
|
+ * clock periods (in receive mode).
|
|
|
+ */
|
|
|
+#define RMT_RX_FILTER_THRES_4 0x000000FFU
|
|
|
+#define RMT_RX_FILTER_THRES_4_M (RMT_RX_FILTER_THRES_4_V << RMT_RX_FILTER_THRES_4_S)
|
|
|
+#define RMT_RX_FILTER_THRES_4_V 0x000000FFU
|
|
|
+#define RMT_RX_FILTER_THRES_4_S 5
|
|
|
+/** RMT_MEM_RX_WRAP_EN_4 : R/W; bitpos: [13]; default: 0;
|
|
|
+ * This is the channel 4 enable bit for wraparound mode: it will resume receiving at
|
|
|
+ * the start when the data to be received is more than its memory size.
|
|
|
+ */
|
|
|
+#define RMT_MEM_RX_WRAP_EN_4 (BIT(13))
|
|
|
+#define RMT_MEM_RX_WRAP_EN_4_M (RMT_MEM_RX_WRAP_EN_4_V << RMT_MEM_RX_WRAP_EN_4_S)
|
|
|
+#define RMT_MEM_RX_WRAP_EN_4_V 0x00000001U
|
|
|
+#define RMT_MEM_RX_WRAP_EN_4_S 13
|
|
|
+/** RMT_AFIFO_RST_4 : WT; bitpos: [14]; default: 0;
|
|
|
+ * Reserved
|
|
|
+ */
|
|
|
+#define RMT_AFIFO_RST_4 (BIT(14))
|
|
|
+#define RMT_AFIFO_RST_4_M (RMT_AFIFO_RST_4_V << RMT_AFIFO_RST_4_S)
|
|
|
+#define RMT_AFIFO_RST_4_V 0x00000001U
|
|
|
+#define RMT_AFIFO_RST_4_S 14
|
|
|
+/** RMT_CONF_UPDATE_4 : WT; bitpos: [15]; default: 0;
|
|
|
+ * synchronization bit for CHANNEL4
|
|
|
+ */
|
|
|
+#define RMT_CONF_UPDATE_4 (BIT(15))
|
|
|
+#define RMT_CONF_UPDATE_4_M (RMT_CONF_UPDATE_4_V << RMT_CONF_UPDATE_4_S)
|
|
|
+#define RMT_CONF_UPDATE_4_V 0x00000001U
|
|
|
+#define RMT_CONF_UPDATE_4_S 15
|
|
|
|
|
|
-#define RMT_CH5CONF0_REG (DR_REG_RMT_BASE + 0x38)
|
|
|
-/* RMT_CARRIER_OUT_LV_CH5 : R/W ;bitpos:[29] ;default: 1'b1 ; */
|
|
|
-/*description: This bit is used to configure the position of carrier wave for CHANNEL$m.; ; 1'h
|
|
|
-0: add carrier wave on low level.; ; 1'h1: add carrier wave on high level..*/
|
|
|
-#define RMT_CARRIER_OUT_LV_CH5 (BIT(29))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH5_M (BIT(29))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH5_V 0x1
|
|
|
-#define RMT_CARRIER_OUT_LV_CH5_S 29
|
|
|
-/* RMT_CARRIER_EN_CH5 : R/W ;bitpos:[28] ;default: 1'b1 ; */
|
|
|
-/*description: This is the carrier modulation enable-control bit for CHANNEL$m. 1: Add carrier
|
|
|
-modulation in the output signal. 0: No carrier modulation in sig_out..*/
|
|
|
-#define RMT_CARRIER_EN_CH5 (BIT(28))
|
|
|
-#define RMT_CARRIER_EN_CH5_M (BIT(28))
|
|
|
-#define RMT_CARRIER_EN_CH5_V 0x1
|
|
|
-#define RMT_CARRIER_EN_CH5_S 28
|
|
|
-/* RMT_MEM_SIZE_CH5 : R/W ;bitpos:[27:24] ;default: 4'h1 ; */
|
|
|
-/*description: This register is used to configure the maximum size of memory allocated to CHANN
|
|
|
-EL$m..*/
|
|
|
-#define RMT_MEM_SIZE_CH5 0x0000000F
|
|
|
-#define RMT_MEM_SIZE_CH5_M ((RMT_MEM_SIZE_CH5_V)<<(RMT_MEM_SIZE_CH5_S))
|
|
|
-#define RMT_MEM_SIZE_CH5_V 0xF
|
|
|
-#define RMT_MEM_SIZE_CH5_S 24
|
|
|
-/* RMT_IDLE_THRES_CH5 : R/W ;bitpos:[22:8] ;default: 15'h7fff ; */
|
|
|
-/*description: When no edge is detected on the input signal and continuous clock cycles is long
|
|
|
-er than this register value, received process is finished..*/
|
|
|
-#define RMT_IDLE_THRES_CH5 0x00007FFF
|
|
|
-#define RMT_IDLE_THRES_CH5_M ((RMT_IDLE_THRES_CH5_V)<<(RMT_IDLE_THRES_CH5_S))
|
|
|
-#define RMT_IDLE_THRES_CH5_V 0x7FFF
|
|
|
-#define RMT_IDLE_THRES_CH5_S 8
|
|
|
-/* RMT_DIV_CNT_CH5 : R/W ;bitpos:[7:0] ;default: 8'h2 ; */
|
|
|
-/*description: This register is used to configure the divider for clock of CHANNEL$m..*/
|
|
|
-#define RMT_DIV_CNT_CH5 0x000000FF
|
|
|
-#define RMT_DIV_CNT_CH5_M ((RMT_DIV_CNT_CH5_V)<<(RMT_DIV_CNT_CH5_S))
|
|
|
-#define RMT_DIV_CNT_CH5_V 0xFF
|
|
|
-#define RMT_DIV_CNT_CH5_S 0
|
|
|
+/** RMT_CH5CONF0_REG register
|
|
|
+ * Channel 5 configure register 0
|
|
|
+ */
|
|
|
+#define RMT_CH5CONF0_REG (DR_REG_RMT_BASE + 0x38)
|
|
|
+/** RMT_DIV_CNT_5 : R/W; bitpos: [7:0]; default: 2;
|
|
|
+ * This register is used to configure the divider for clock of CHANNEL5.
|
|
|
+ */
|
|
|
+#define RMT_DIV_CNT_5 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_5_M (RMT_DIV_CNT_5_V << RMT_DIV_CNT_5_S)
|
|
|
+#define RMT_DIV_CNT_5_V 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_5_S 0
|
|
|
+/** RMT_IDLE_THRES_5 : R/W; bitpos: [22:8]; default: 32767;
|
|
|
+ * When no edge is detected on the input signal and continuous clock cycles is longer
|
|
|
+ * than this register value, received process is finished.
|
|
|
+ */
|
|
|
+#define RMT_IDLE_THRES_5 0x00007FFFU
|
|
|
+#define RMT_IDLE_THRES_5_M (RMT_IDLE_THRES_5_V << RMT_IDLE_THRES_5_S)
|
|
|
+#define RMT_IDLE_THRES_5_V 0x00007FFFU
|
|
|
+#define RMT_IDLE_THRES_5_S 8
|
|
|
+/** RMT_MEM_SIZE_5 : R/W; bitpos: [27:24]; default: 1;
|
|
|
+ * This register is used to configure the maximum size of memory allocated to CHANNEL5.
|
|
|
+ */
|
|
|
+#define RMT_MEM_SIZE_5 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_5_M (RMT_MEM_SIZE_5_V << RMT_MEM_SIZE_5_S)
|
|
|
+#define RMT_MEM_SIZE_5_V 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_5_S 24
|
|
|
+/** RMT_CARRIER_EN_5 : R/W; bitpos: [28]; default: 1;
|
|
|
+ * This is the carrier modulation enable-control bit for CHANNEL5. 1: Add carrier
|
|
|
+ * modulation in the output signal. 0: No carrier modulation in sig_out.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_EN_5 (BIT(28))
|
|
|
+#define RMT_CARRIER_EN_5_M (RMT_CARRIER_EN_5_V << RMT_CARRIER_EN_5_S)
|
|
|
+#define RMT_CARRIER_EN_5_V 0x00000001U
|
|
|
+#define RMT_CARRIER_EN_5_S 28
|
|
|
+/** RMT_CARRIER_OUT_LV_5 : R/W; bitpos: [29]; default: 1;
|
|
|
+ * This bit is used to configure the position of carrier wave for CHANNEL5.
|
|
|
+ *
|
|
|
+ * 1'h0: add carrier wave on low level.
|
|
|
+ *
|
|
|
+ * 1'h1: add carrier wave on high level.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_OUT_LV_5 (BIT(29))
|
|
|
+#define RMT_CARRIER_OUT_LV_5_M (RMT_CARRIER_OUT_LV_5_V << RMT_CARRIER_OUT_LV_5_S)
|
|
|
+#define RMT_CARRIER_OUT_LV_5_V 0x00000001U
|
|
|
+#define RMT_CARRIER_OUT_LV_5_S 29
|
|
|
|
|
|
-#define RMT_CH5CONF1_REG (DR_REG_RMT_BASE + 0x3C)
|
|
|
-/* RMT_CONF_UPDATE_CH5 : WT ;bitpos:[15] ;default: 1'b0 ; */
|
|
|
-/*description: synchronization bit for CHANNEL$m.*/
|
|
|
-#define RMT_CONF_UPDATE_CH5 (BIT(15))
|
|
|
-#define RMT_CONF_UPDATE_CH5_M (BIT(15))
|
|
|
-#define RMT_CONF_UPDATE_CH5_V 0x1
|
|
|
-#define RMT_CONF_UPDATE_CH5_S 15
|
|
|
-/* RMT_AFIFO_RST_CH5 : WT ;bitpos:[14] ;default: 1'b0 ; */
|
|
|
-/*description: Reserved.*/
|
|
|
-#define RMT_AFIFO_RST_CH5 (BIT(14))
|
|
|
-#define RMT_AFIFO_RST_CH5_M (BIT(14))
|
|
|
-#define RMT_AFIFO_RST_CH5_V 0x1
|
|
|
-#define RMT_AFIFO_RST_CH5_S 14
|
|
|
-/* RMT_MEM_RX_WRAP_EN_CH5 : R/W ;bitpos:[13] ;default: 1'b0 ; */
|
|
|
-/*description: This is the channel $m enable bit for wraparound mode: it will resume receiving
|
|
|
-at the start when the data to be received is more than its memory size..*/
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH5 (BIT(13))
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH5_M (BIT(13))
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH5_V 0x1
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH5_S 13
|
|
|
-/* RMT_RX_FILTER_THRES_CH5 : R/W ;bitpos:[12:5] ;default: 8'hf ; */
|
|
|
-/*description: Ignores the input pulse when its width is smaller than this register value in AP
|
|
|
-B clock periods (in receive mode)..*/
|
|
|
-#define RMT_RX_FILTER_THRES_CH5 0x000000FF
|
|
|
-#define RMT_RX_FILTER_THRES_CH5_M ((RMT_RX_FILTER_THRES_CH5_V)<<(RMT_RX_FILTER_THRES_CH5_S))
|
|
|
-#define RMT_RX_FILTER_THRES_CH5_V 0xFF
|
|
|
-#define RMT_RX_FILTER_THRES_CH5_S 5
|
|
|
-/* RMT_RX_FILTER_EN_CH5 : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: This is the receive filter's enable bit for CHANNEL$m..*/
|
|
|
-#define RMT_RX_FILTER_EN_CH5 (BIT(4))
|
|
|
-#define RMT_RX_FILTER_EN_CH5_M (BIT(4))
|
|
|
-#define RMT_RX_FILTER_EN_CH5_V 0x1
|
|
|
-#define RMT_RX_FILTER_EN_CH5_S 4
|
|
|
-/* RMT_MEM_OWNER_CH5 : R/W/SC ;bitpos:[3] ;default: 1'b1 ; */
|
|
|
-/*description: This register marks the ownership of CHANNEL$m's ram block.; ; 1'h1: Receiver is
|
|
|
- using the ram. ; ; 1'h0: APB bus is using the ram..*/
|
|
|
-#define RMT_MEM_OWNER_CH5 (BIT(3))
|
|
|
-#define RMT_MEM_OWNER_CH5_M (BIT(3))
|
|
|
-#define RMT_MEM_OWNER_CH5_V 0x1
|
|
|
-#define RMT_MEM_OWNER_CH5_S 3
|
|
|
-/* RMT_APB_MEM_RST_CH5 : WT ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to reset W/R ram address for CHANNEL$m by accessing apb fifo..*/
|
|
|
-#define RMT_APB_MEM_RST_CH5 (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH5_M (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH5_V 0x1
|
|
|
-#define RMT_APB_MEM_RST_CH5_S 2
|
|
|
-/* RMT_MEM_WR_RST_CH5 : WT ;bitpos:[1] ;default: 1'h0 ; */
|
|
|
-/*description: Set this bit to reset write ram address for CHANNEL$m by accessing receiver..*/
|
|
|
-#define RMT_MEM_WR_RST_CH5 (BIT(1))
|
|
|
-#define RMT_MEM_WR_RST_CH5_M (BIT(1))
|
|
|
-#define RMT_MEM_WR_RST_CH5_V 0x1
|
|
|
-#define RMT_MEM_WR_RST_CH5_S 1
|
|
|
-/* RMT_RX_EN_CH5 : R/W ;bitpos:[0] ;default: 1'h0 ; */
|
|
|
-/*description: Set this bit to enable receiver to receive data on CHANNEL$m..*/
|
|
|
-#define RMT_RX_EN_CH5 (BIT(0))
|
|
|
-#define RMT_RX_EN_CH5_M (BIT(0))
|
|
|
-#define RMT_RX_EN_CH5_V 0x1
|
|
|
-#define RMT_RX_EN_CH5_S 0
|
|
|
+/** RMT_CH5CONF1_REG register
|
|
|
+ * Channel 5 configure register 1
|
|
|
+ */
|
|
|
+#define RMT_CH5CONF1_REG (DR_REG_RMT_BASE + 0x3c)
|
|
|
+/** RMT_RX_EN_5 : R/W; bitpos: [0]; default: 0;
|
|
|
+ * Set this bit to enable receiver to receive data on CHANNEL5.
|
|
|
+ */
|
|
|
+#define RMT_RX_EN_5 (BIT(0))
|
|
|
+#define RMT_RX_EN_5_M (RMT_RX_EN_5_V << RMT_RX_EN_5_S)
|
|
|
+#define RMT_RX_EN_5_V 0x00000001U
|
|
|
+#define RMT_RX_EN_5_S 0
|
|
|
+/** RMT_MEM_WR_RST_5 : WT; bitpos: [1]; default: 0;
|
|
|
+ * Set this bit to reset write ram address for CHANNEL5 by accessing receiver.
|
|
|
+ */
|
|
|
+#define RMT_MEM_WR_RST_5 (BIT(1))
|
|
|
+#define RMT_MEM_WR_RST_5_M (RMT_MEM_WR_RST_5_V << RMT_MEM_WR_RST_5_S)
|
|
|
+#define RMT_MEM_WR_RST_5_V 0x00000001U
|
|
|
+#define RMT_MEM_WR_RST_5_S 1
|
|
|
+/** RMT_APB_MEM_RST_5 : WT; bitpos: [2]; default: 0;
|
|
|
+ * Set this bit to reset W/R ram address for CHANNEL5 by accessing apb fifo.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RST_5 (BIT(2))
|
|
|
+#define RMT_APB_MEM_RST_5_M (RMT_APB_MEM_RST_5_V << RMT_APB_MEM_RST_5_S)
|
|
|
+#define RMT_APB_MEM_RST_5_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_RST_5_S 2
|
|
|
+/** RMT_MEM_OWNER_5 : R/W/SC; bitpos: [3]; default: 1;
|
|
|
+ * This register marks the ownership of CHANNEL5's ram block.
|
|
|
+ *
|
|
|
+ * 1'h1: Receiver is using the ram.
|
|
|
+ *
|
|
|
+ * 1'h0: APB bus is using the ram.
|
|
|
+ */
|
|
|
+#define RMT_MEM_OWNER_5 (BIT(3))
|
|
|
+#define RMT_MEM_OWNER_5_M (RMT_MEM_OWNER_5_V << RMT_MEM_OWNER_5_S)
|
|
|
+#define RMT_MEM_OWNER_5_V 0x00000001U
|
|
|
+#define RMT_MEM_OWNER_5_S 3
|
|
|
+/** RMT_RX_FILTER_EN_5 : R/W; bitpos: [4]; default: 0;
|
|
|
+ * This is the receive filter's enable bit for CHANNEL5.
|
|
|
+ */
|
|
|
+#define RMT_RX_FILTER_EN_5 (BIT(4))
|
|
|
+#define RMT_RX_FILTER_EN_5_M (RMT_RX_FILTER_EN_5_V << RMT_RX_FILTER_EN_5_S)
|
|
|
+#define RMT_RX_FILTER_EN_5_V 0x00000001U
|
|
|
+#define RMT_RX_FILTER_EN_5_S 4
|
|
|
+/** RMT_RX_FILTER_THRES_5 : R/W; bitpos: [12:5]; default: 15;
|
|
|
+ * Ignores the input pulse when its width is smaller than this register value in APB
|
|
|
+ * clock periods (in receive mode).
|
|
|
+ */
|
|
|
+#define RMT_RX_FILTER_THRES_5 0x000000FFU
|
|
|
+#define RMT_RX_FILTER_THRES_5_M (RMT_RX_FILTER_THRES_5_V << RMT_RX_FILTER_THRES_5_S)
|
|
|
+#define RMT_RX_FILTER_THRES_5_V 0x000000FFU
|
|
|
+#define RMT_RX_FILTER_THRES_5_S 5
|
|
|
+/** RMT_MEM_RX_WRAP_EN_5 : R/W; bitpos: [13]; default: 0;
|
|
|
+ * This is the channel 5 enable bit for wraparound mode: it will resume receiving at
|
|
|
+ * the start when the data to be received is more than its memory size.
|
|
|
+ */
|
|
|
+#define RMT_MEM_RX_WRAP_EN_5 (BIT(13))
|
|
|
+#define RMT_MEM_RX_WRAP_EN_5_M (RMT_MEM_RX_WRAP_EN_5_V << RMT_MEM_RX_WRAP_EN_5_S)
|
|
|
+#define RMT_MEM_RX_WRAP_EN_5_V 0x00000001U
|
|
|
+#define RMT_MEM_RX_WRAP_EN_5_S 13
|
|
|
+/** RMT_AFIFO_RST_5 : WT; bitpos: [14]; default: 0;
|
|
|
+ * Reserved
|
|
|
+ */
|
|
|
+#define RMT_AFIFO_RST_5 (BIT(14))
|
|
|
+#define RMT_AFIFO_RST_5_M (RMT_AFIFO_RST_5_V << RMT_AFIFO_RST_5_S)
|
|
|
+#define RMT_AFIFO_RST_5_V 0x00000001U
|
|
|
+#define RMT_AFIFO_RST_5_S 14
|
|
|
+/** RMT_CONF_UPDATE_5 : WT; bitpos: [15]; default: 0;
|
|
|
+ * synchronization bit for CHANNEL5
|
|
|
+ */
|
|
|
+#define RMT_CONF_UPDATE_5 (BIT(15))
|
|
|
+#define RMT_CONF_UPDATE_5_M (RMT_CONF_UPDATE_5_V << RMT_CONF_UPDATE_5_S)
|
|
|
+#define RMT_CONF_UPDATE_5_V 0x00000001U
|
|
|
+#define RMT_CONF_UPDATE_5_S 15
|
|
|
|
|
|
-#define RMT_CH6CONF0_REG (DR_REG_RMT_BASE + 0x40)
|
|
|
-/* RMT_CARRIER_OUT_LV_CH6 : R/W ;bitpos:[29] ;default: 1'b1 ; */
|
|
|
-/*description: This bit is used to configure the position of carrier wave for CHANNEL$m.; ; 1'h
|
|
|
-0: add carrier wave on low level.; ; 1'h1: add carrier wave on high level..*/
|
|
|
-#define RMT_CARRIER_OUT_LV_CH6 (BIT(29))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH6_M (BIT(29))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH6_V 0x1
|
|
|
-#define RMT_CARRIER_OUT_LV_CH6_S 29
|
|
|
-/* RMT_CARRIER_EN_CH6 : R/W ;bitpos:[28] ;default: 1'b1 ; */
|
|
|
-/*description: This is the carrier modulation enable-control bit for CHANNEL$m. 1: Add carrier
|
|
|
-modulation in the output signal. 0: No carrier modulation in sig_out..*/
|
|
|
-#define RMT_CARRIER_EN_CH6 (BIT(28))
|
|
|
-#define RMT_CARRIER_EN_CH6_M (BIT(28))
|
|
|
-#define RMT_CARRIER_EN_CH6_V 0x1
|
|
|
-#define RMT_CARRIER_EN_CH6_S 28
|
|
|
-/* RMT_MEM_SIZE_CH6 : R/W ;bitpos:[27:24] ;default: 4'h1 ; */
|
|
|
-/*description: This register is used to configure the maximum size of memory allocated to CHANN
|
|
|
-EL$m..*/
|
|
|
-#define RMT_MEM_SIZE_CH6 0x0000000F
|
|
|
-#define RMT_MEM_SIZE_CH6_M ((RMT_MEM_SIZE_CH6_V)<<(RMT_MEM_SIZE_CH6_S))
|
|
|
-#define RMT_MEM_SIZE_CH6_V 0xF
|
|
|
-#define RMT_MEM_SIZE_CH6_S 24
|
|
|
-/* RMT_IDLE_THRES_CH6 : R/W ;bitpos:[22:8] ;default: 15'h7fff ; */
|
|
|
-/*description: When no edge is detected on the input signal and continuous clock cycles is long
|
|
|
-er than this register value, received process is finished..*/
|
|
|
-#define RMT_IDLE_THRES_CH6 0x00007FFF
|
|
|
-#define RMT_IDLE_THRES_CH6_M ((RMT_IDLE_THRES_CH6_V)<<(RMT_IDLE_THRES_CH6_S))
|
|
|
-#define RMT_IDLE_THRES_CH6_V 0x7FFF
|
|
|
-#define RMT_IDLE_THRES_CH6_S 8
|
|
|
-/* RMT_DIV_CNT_CH6 : R/W ;bitpos:[7:0] ;default: 8'h2 ; */
|
|
|
-/*description: This register is used to configure the divider for clock of CHANNEL$m..*/
|
|
|
-#define RMT_DIV_CNT_CH6 0x000000FF
|
|
|
-#define RMT_DIV_CNT_CH6_M ((RMT_DIV_CNT_CH6_V)<<(RMT_DIV_CNT_CH6_S))
|
|
|
-#define RMT_DIV_CNT_CH6_V 0xFF
|
|
|
-#define RMT_DIV_CNT_CH6_S 0
|
|
|
+/** RMT_CH6CONF0_REG register
|
|
|
+ * Channel 6 configure register 0
|
|
|
+ */
|
|
|
+#define RMT_CH6CONF0_REG (DR_REG_RMT_BASE + 0x40)
|
|
|
+/** RMT_DIV_CNT_6 : R/W; bitpos: [7:0]; default: 2;
|
|
|
+ * This register is used to configure the divider for clock of CHANNEL6.
|
|
|
+ */
|
|
|
+#define RMT_DIV_CNT_6 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_6_M (RMT_DIV_CNT_6_V << RMT_DIV_CNT_6_S)
|
|
|
+#define RMT_DIV_CNT_6_V 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_6_S 0
|
|
|
+/** RMT_IDLE_THRES_6 : R/W; bitpos: [22:8]; default: 32767;
|
|
|
+ * When no edge is detected on the input signal and continuous clock cycles is longer
|
|
|
+ * than this register value, received process is finished.
|
|
|
+ */
|
|
|
+#define RMT_IDLE_THRES_6 0x00007FFFU
|
|
|
+#define RMT_IDLE_THRES_6_M (RMT_IDLE_THRES_6_V << RMT_IDLE_THRES_6_S)
|
|
|
+#define RMT_IDLE_THRES_6_V 0x00007FFFU
|
|
|
+#define RMT_IDLE_THRES_6_S 8
|
|
|
+/** RMT_MEM_SIZE_6 : R/W; bitpos: [27:24]; default: 1;
|
|
|
+ * This register is used to configure the maximum size of memory allocated to CHANNEL6.
|
|
|
+ */
|
|
|
+#define RMT_MEM_SIZE_6 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_6_M (RMT_MEM_SIZE_6_V << RMT_MEM_SIZE_6_S)
|
|
|
+#define RMT_MEM_SIZE_6_V 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_6_S 24
|
|
|
+/** RMT_CARRIER_EN_6 : R/W; bitpos: [28]; default: 1;
|
|
|
+ * This is the carrier modulation enable-control bit for CHANNEL6. 1: Add carrier
|
|
|
+ * modulation in the output signal. 0: No carrier modulation in sig_out.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_EN_6 (BIT(28))
|
|
|
+#define RMT_CARRIER_EN_6_M (RMT_CARRIER_EN_6_V << RMT_CARRIER_EN_6_S)
|
|
|
+#define RMT_CARRIER_EN_6_V 0x00000001U
|
|
|
+#define RMT_CARRIER_EN_6_S 28
|
|
|
+/** RMT_CARRIER_OUT_LV_6 : R/W; bitpos: [29]; default: 1;
|
|
|
+ * This bit is used to configure the position of carrier wave for CHANNEL6.
|
|
|
+ *
|
|
|
+ * 1'h0: add carrier wave on low level.
|
|
|
+ *
|
|
|
+ * 1'h1: add carrier wave on high level.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_OUT_LV_6 (BIT(29))
|
|
|
+#define RMT_CARRIER_OUT_LV_6_M (RMT_CARRIER_OUT_LV_6_V << RMT_CARRIER_OUT_LV_6_S)
|
|
|
+#define RMT_CARRIER_OUT_LV_6_V 0x00000001U
|
|
|
+#define RMT_CARRIER_OUT_LV_6_S 29
|
|
|
|
|
|
-#define RMT_CH6CONF1_REG (DR_REG_RMT_BASE + 0x44)
|
|
|
-/* RMT_CONF_UPDATE_CH6 : WT ;bitpos:[15] ;default: 1'b0 ; */
|
|
|
-/*description: synchronization bit for CHANNEL$m.*/
|
|
|
-#define RMT_CONF_UPDATE_CH6 (BIT(15))
|
|
|
-#define RMT_CONF_UPDATE_CH6_M (BIT(15))
|
|
|
-#define RMT_CONF_UPDATE_CH6_V 0x1
|
|
|
-#define RMT_CONF_UPDATE_CH6_S 15
|
|
|
-/* RMT_AFIFO_RST_CH6 : WT ;bitpos:[14] ;default: 1'b0 ; */
|
|
|
-/*description: Reserved.*/
|
|
|
-#define RMT_AFIFO_RST_CH6 (BIT(14))
|
|
|
-#define RMT_AFIFO_RST_CH6_M (BIT(14))
|
|
|
-#define RMT_AFIFO_RST_CH6_V 0x1
|
|
|
-#define RMT_AFIFO_RST_CH6_S 14
|
|
|
-/* RMT_MEM_RX_WRAP_EN_CH6 : R/W ;bitpos:[13] ;default: 1'b0 ; */
|
|
|
-/*description: This is the channel $m enable bit for wraparound mode: it will resume receiving
|
|
|
-at the start when the data to be received is more than its memory size..*/
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH6 (BIT(13))
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH6_M (BIT(13))
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH6_V 0x1
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH6_S 13
|
|
|
-/* RMT_RX_FILTER_THRES_CH6 : R/W ;bitpos:[12:5] ;default: 8'hf ; */
|
|
|
-/*description: Ignores the input pulse when its width is smaller than this register value in AP
|
|
|
-B clock periods (in receive mode)..*/
|
|
|
-#define RMT_RX_FILTER_THRES_CH6 0x000000FF
|
|
|
-#define RMT_RX_FILTER_THRES_CH6_M ((RMT_RX_FILTER_THRES_CH6_V)<<(RMT_RX_FILTER_THRES_CH6_S))
|
|
|
-#define RMT_RX_FILTER_THRES_CH6_V 0xFF
|
|
|
-#define RMT_RX_FILTER_THRES_CH6_S 5
|
|
|
-/* RMT_RX_FILTER_EN_CH6 : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: This is the receive filter's enable bit for CHANNEL$m..*/
|
|
|
-#define RMT_RX_FILTER_EN_CH6 (BIT(4))
|
|
|
-#define RMT_RX_FILTER_EN_CH6_M (BIT(4))
|
|
|
-#define RMT_RX_FILTER_EN_CH6_V 0x1
|
|
|
-#define RMT_RX_FILTER_EN_CH6_S 4
|
|
|
-/* RMT_MEM_OWNER_CH6 : R/W/SC ;bitpos:[3] ;default: 1'b1 ; */
|
|
|
-/*description: This register marks the ownership of CHANNEL$m's ram block.; ; 1'h1: Receiver is
|
|
|
- using the ram. ; ; 1'h0: APB bus is using the ram..*/
|
|
|
-#define RMT_MEM_OWNER_CH6 (BIT(3))
|
|
|
-#define RMT_MEM_OWNER_CH6_M (BIT(3))
|
|
|
-#define RMT_MEM_OWNER_CH6_V 0x1
|
|
|
-#define RMT_MEM_OWNER_CH6_S 3
|
|
|
-/* RMT_APB_MEM_RST_CH6 : WT ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to reset W/R ram address for CHANNEL$m by accessing apb fifo..*/
|
|
|
-#define RMT_APB_MEM_RST_CH6 (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH6_M (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH6_V 0x1
|
|
|
-#define RMT_APB_MEM_RST_CH6_S 2
|
|
|
-/* RMT_MEM_WR_RST_CH6 : WT ;bitpos:[1] ;default: 1'h0 ; */
|
|
|
-/*description: Set this bit to reset write ram address for CHANNEL$m by accessing receiver..*/
|
|
|
-#define RMT_MEM_WR_RST_CH6 (BIT(1))
|
|
|
-#define RMT_MEM_WR_RST_CH6_M (BIT(1))
|
|
|
-#define RMT_MEM_WR_RST_CH6_V 0x1
|
|
|
-#define RMT_MEM_WR_RST_CH6_S 1
|
|
|
-/* RMT_RX_EN_CH6 : R/W ;bitpos:[0] ;default: 1'h0 ; */
|
|
|
-/*description: Set this bit to enable receiver to receive data on CHANNEL$m..*/
|
|
|
-#define RMT_RX_EN_CH6 (BIT(0))
|
|
|
-#define RMT_RX_EN_CH6_M (BIT(0))
|
|
|
-#define RMT_RX_EN_CH6_V 0x1
|
|
|
-#define RMT_RX_EN_CH6_S 0
|
|
|
+/** RMT_CH6CONF1_REG register
|
|
|
+ * Channel 6 configure register 1
|
|
|
+ */
|
|
|
+#define RMT_CH6CONF1_REG (DR_REG_RMT_BASE + 0x44)
|
|
|
+/** RMT_RX_EN_6 : R/W; bitpos: [0]; default: 0;
|
|
|
+ * Set this bit to enable receiver to receive data on CHANNEL6.
|
|
|
+ */
|
|
|
+#define RMT_RX_EN_6 (BIT(0))
|
|
|
+#define RMT_RX_EN_6_M (RMT_RX_EN_6_V << RMT_RX_EN_6_S)
|
|
|
+#define RMT_RX_EN_6_V 0x00000001U
|
|
|
+#define RMT_RX_EN_6_S 0
|
|
|
+/** RMT_MEM_WR_RST_6 : WT; bitpos: [1]; default: 0;
|
|
|
+ * Set this bit to reset write ram address for CHANNEL6 by accessing receiver.
|
|
|
+ */
|
|
|
+#define RMT_MEM_WR_RST_6 (BIT(1))
|
|
|
+#define RMT_MEM_WR_RST_6_M (RMT_MEM_WR_RST_6_V << RMT_MEM_WR_RST_6_S)
|
|
|
+#define RMT_MEM_WR_RST_6_V 0x00000001U
|
|
|
+#define RMT_MEM_WR_RST_6_S 1
|
|
|
+/** RMT_APB_MEM_RST_6 : WT; bitpos: [2]; default: 0;
|
|
|
+ * Set this bit to reset W/R ram address for CHANNEL6 by accessing apb fifo.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RST_6 (BIT(2))
|
|
|
+#define RMT_APB_MEM_RST_6_M (RMT_APB_MEM_RST_6_V << RMT_APB_MEM_RST_6_S)
|
|
|
+#define RMT_APB_MEM_RST_6_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_RST_6_S 2
|
|
|
+/** RMT_MEM_OWNER_6 : R/W/SC; bitpos: [3]; default: 1;
|
|
|
+ * This register marks the ownership of CHANNEL6's ram block.
|
|
|
+ *
|
|
|
+ * 1'h1: Receiver is using the ram.
|
|
|
+ *
|
|
|
+ * 1'h0: APB bus is using the ram.
|
|
|
+ */
|
|
|
+#define RMT_MEM_OWNER_6 (BIT(3))
|
|
|
+#define RMT_MEM_OWNER_6_M (RMT_MEM_OWNER_6_V << RMT_MEM_OWNER_6_S)
|
|
|
+#define RMT_MEM_OWNER_6_V 0x00000001U
|
|
|
+#define RMT_MEM_OWNER_6_S 3
|
|
|
+/** RMT_RX_FILTER_EN_6 : R/W; bitpos: [4]; default: 0;
|
|
|
+ * This is the receive filter's enable bit for CHANNEL6.
|
|
|
+ */
|
|
|
+#define RMT_RX_FILTER_EN_6 (BIT(4))
|
|
|
+#define RMT_RX_FILTER_EN_6_M (RMT_RX_FILTER_EN_6_V << RMT_RX_FILTER_EN_6_S)
|
|
|
+#define RMT_RX_FILTER_EN_6_V 0x00000001U
|
|
|
+#define RMT_RX_FILTER_EN_6_S 4
|
|
|
+/** RMT_RX_FILTER_THRES_6 : R/W; bitpos: [12:5]; default: 15;
|
|
|
+ * Ignores the input pulse when its width is smaller than this register value in APB
|
|
|
+ * clock periods (in receive mode).
|
|
|
+ */
|
|
|
+#define RMT_RX_FILTER_THRES_6 0x000000FFU
|
|
|
+#define RMT_RX_FILTER_THRES_6_M (RMT_RX_FILTER_THRES_6_V << RMT_RX_FILTER_THRES_6_S)
|
|
|
+#define RMT_RX_FILTER_THRES_6_V 0x000000FFU
|
|
|
+#define RMT_RX_FILTER_THRES_6_S 5
|
|
|
+/** RMT_MEM_RX_WRAP_EN_6 : R/W; bitpos: [13]; default: 0;
|
|
|
+ * This is the channel 6 enable bit for wraparound mode: it will resume receiving at
|
|
|
+ * the start when the data to be received is more than its memory size.
|
|
|
+ */
|
|
|
+#define RMT_MEM_RX_WRAP_EN_6 (BIT(13))
|
|
|
+#define RMT_MEM_RX_WRAP_EN_6_M (RMT_MEM_RX_WRAP_EN_6_V << RMT_MEM_RX_WRAP_EN_6_S)
|
|
|
+#define RMT_MEM_RX_WRAP_EN_6_V 0x00000001U
|
|
|
+#define RMT_MEM_RX_WRAP_EN_6_S 13
|
|
|
+/** RMT_AFIFO_RST_6 : WT; bitpos: [14]; default: 0;
|
|
|
+ * Reserved
|
|
|
+ */
|
|
|
+#define RMT_AFIFO_RST_6 (BIT(14))
|
|
|
+#define RMT_AFIFO_RST_6_M (RMT_AFIFO_RST_6_V << RMT_AFIFO_RST_6_S)
|
|
|
+#define RMT_AFIFO_RST_6_V 0x00000001U
|
|
|
+#define RMT_AFIFO_RST_6_S 14
|
|
|
+/** RMT_CONF_UPDATE_6 : WT; bitpos: [15]; default: 0;
|
|
|
+ * synchronization bit for CHANNEL6
|
|
|
+ */
|
|
|
+#define RMT_CONF_UPDATE_6 (BIT(15))
|
|
|
+#define RMT_CONF_UPDATE_6_M (RMT_CONF_UPDATE_6_V << RMT_CONF_UPDATE_6_S)
|
|
|
+#define RMT_CONF_UPDATE_6_V 0x00000001U
|
|
|
+#define RMT_CONF_UPDATE_6_S 15
|
|
|
|
|
|
-#define RMT_CH7CONF0_REG (DR_REG_RMT_BASE + 0x48)
|
|
|
-/* RMT_CARRIER_OUT_LV_CH7 : R/W ;bitpos:[29] ;default: 1'b1 ; */
|
|
|
-/*description: This bit is used to configure the position of carrier wave for CHANNEL$m.; ; 1'h
|
|
|
-0: add carrier wave on low level.; ; 1'h1: add carrier wave on high level..*/
|
|
|
-#define RMT_CARRIER_OUT_LV_CH7 (BIT(29))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH7_M (BIT(29))
|
|
|
-#define RMT_CARRIER_OUT_LV_CH7_V 0x1
|
|
|
-#define RMT_CARRIER_OUT_LV_CH7_S 29
|
|
|
-/* RMT_CARRIER_EN_CH7 : R/W ;bitpos:[28] ;default: 1'b1 ; */
|
|
|
-/*description: This is the carrier modulation enable-control bit for CHANNEL$m. 1: Add carrier
|
|
|
-modulation in the output signal. 0: No carrier modulation in sig_out..*/
|
|
|
-#define RMT_CARRIER_EN_CH7 (BIT(28))
|
|
|
-#define RMT_CARRIER_EN_CH7_M (BIT(28))
|
|
|
-#define RMT_CARRIER_EN_CH7_V 0x1
|
|
|
-#define RMT_CARRIER_EN_CH7_S 28
|
|
|
-/* RMT_MEM_SIZE_CH7 : R/W ;bitpos:[27:24] ;default: 4'h1 ; */
|
|
|
-/*description: This register is used to configure the maximum size of memory allocated to CHANN
|
|
|
-EL$m..*/
|
|
|
-#define RMT_MEM_SIZE_CH7 0x0000000F
|
|
|
-#define RMT_MEM_SIZE_CH7_M ((RMT_MEM_SIZE_CH7_V)<<(RMT_MEM_SIZE_CH7_S))
|
|
|
-#define RMT_MEM_SIZE_CH7_V 0xF
|
|
|
-#define RMT_MEM_SIZE_CH7_S 24
|
|
|
-/* RMT_DMA_ACCESS_EN_CH7 : R/W ;bitpos:[23] ;default: 1'b0 ; */
|
|
|
-/*description: This bit is used to enable the dma access function for CHANNEL$m..*/
|
|
|
-#define RMT_DMA_ACCESS_EN_CH7 (BIT(23))
|
|
|
-#define RMT_DMA_ACCESS_EN_CH7_M (BIT(23))
|
|
|
-#define RMT_DMA_ACCESS_EN_CH7_V 0x1
|
|
|
-#define RMT_DMA_ACCESS_EN_CH7_S 23
|
|
|
-/* RMT_IDLE_THRES_CH7 : R/W ;bitpos:[22:8] ;default: 15'h7fff ; */
|
|
|
-/*description: When no edge is detected on the input signal and continuous clock cycles is long
|
|
|
-er than this register value, received process is finished..*/
|
|
|
-#define RMT_IDLE_THRES_CH7 0x00007FFF
|
|
|
-#define RMT_IDLE_THRES_CH7_M ((RMT_IDLE_THRES_CH7_V)<<(RMT_IDLE_THRES_CH7_S))
|
|
|
-#define RMT_IDLE_THRES_CH7_V 0x7FFF
|
|
|
-#define RMT_IDLE_THRES_CH7_S 8
|
|
|
-/* RMT_DIV_CNT_CH7 : R/W ;bitpos:[7:0] ;default: 8'h2 ; */
|
|
|
-/*description: This register is used to configure the divider for clock of CHANNEL$m..*/
|
|
|
-#define RMT_DIV_CNT_CH7 0x000000FF
|
|
|
-#define RMT_DIV_CNT_CH7_M ((RMT_DIV_CNT_CH7_V)<<(RMT_DIV_CNT_CH7_S))
|
|
|
-#define RMT_DIV_CNT_CH7_V 0xFF
|
|
|
-#define RMT_DIV_CNT_CH7_S 0
|
|
|
+/** RMT_CH7CONF0_REG register
|
|
|
+ * Channel 7 configure register 0
|
|
|
+ */
|
|
|
+#define RMT_CH7CONF0_REG (DR_REG_RMT_BASE + 0x48)
|
|
|
+/** RMT_DIV_CNT_7 : R/W; bitpos: [7:0]; default: 2;
|
|
|
+ * This register is used to configure the divider for clock of CHANNEL7.
|
|
|
+ */
|
|
|
+#define RMT_DIV_CNT_7 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_7_M (RMT_DIV_CNT_7_V << RMT_DIV_CNT_7_S)
|
|
|
+#define RMT_DIV_CNT_7_V 0x000000FFU
|
|
|
+#define RMT_DIV_CNT_7_S 0
|
|
|
+/** RMT_IDLE_THRES_7 : R/W; bitpos: [22:8]; default: 32767;
|
|
|
+ * When no edge is detected on the input signal and continuous clock cycles is longer
|
|
|
+ * than this register value, received process is finished.
|
|
|
+ */
|
|
|
+#define RMT_IDLE_THRES_7 0x00007FFFU
|
|
|
+#define RMT_IDLE_THRES_7_M (RMT_IDLE_THRES_7_V << RMT_IDLE_THRES_7_S)
|
|
|
+#define RMT_IDLE_THRES_7_V 0x00007FFFU
|
|
|
+#define RMT_IDLE_THRES_7_S 8
|
|
|
+/** RMT_MEM_SIZE_7 : R/W; bitpos: [27:24]; default: 1;
|
|
|
+ * This register is used to configure the maximum size of memory allocated to CHANNEL7.
|
|
|
+ */
|
|
|
+#define RMT_MEM_SIZE_7 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_7_M (RMT_MEM_SIZE_7_V << RMT_MEM_SIZE_7_S)
|
|
|
+#define RMT_MEM_SIZE_7_V 0x0000000FU
|
|
|
+#define RMT_MEM_SIZE_7_S 24
|
|
|
+/** RMT_CARRIER_EN_7 : R/W; bitpos: [28]; default: 1;
|
|
|
+ * This is the carrier modulation enable-control bit for CHANNEL7. 1: Add carrier
|
|
|
+ * modulation in the output signal. 0: No carrier modulation in sig_out.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_EN_7 (BIT(28))
|
|
|
+#define RMT_CARRIER_EN_7_M (RMT_CARRIER_EN_7_V << RMT_CARRIER_EN_7_S)
|
|
|
+#define RMT_CARRIER_EN_7_V 0x00000001U
|
|
|
+#define RMT_CARRIER_EN_7_S 28
|
|
|
+/** RMT_CARRIER_OUT_LV_7 : R/W; bitpos: [29]; default: 1;
|
|
|
+ * This bit is used to configure the position of carrier wave for CHANNEL7.
|
|
|
+ *
|
|
|
+ * 1'h0: add carrier wave on low level.
|
|
|
+ *
|
|
|
+ * 1'h1: add carrier wave on high level.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_OUT_LV_7 (BIT(29))
|
|
|
+#define RMT_CARRIER_OUT_LV_7_M (RMT_CARRIER_OUT_LV_7_V << RMT_CARRIER_OUT_LV_7_S)
|
|
|
+#define RMT_CARRIER_OUT_LV_7_V 0x00000001U
|
|
|
+#define RMT_CARRIER_OUT_LV_7_S 29
|
|
|
|
|
|
-#define RMT_CH7CONF1_REG (DR_REG_RMT_BASE + 0x4C)
|
|
|
-/* RMT_CONF_UPDATE_CH7 : WT ;bitpos:[15] ;default: 1'b0 ; */
|
|
|
-/*description: synchronization bit for CHANNEL$m.*/
|
|
|
-#define RMT_CONF_UPDATE_CH7 (BIT(15))
|
|
|
-#define RMT_CONF_UPDATE_CH7_M (BIT(15))
|
|
|
-#define RMT_CONF_UPDATE_CH7_V 0x1
|
|
|
-#define RMT_CONF_UPDATE_CH7_S 15
|
|
|
-/* RMT_AFIFO_RST_CH7 : WT ;bitpos:[14] ;default: 1'b0 ; */
|
|
|
-/*description: Reserved.*/
|
|
|
-#define RMT_AFIFO_RST_CH7 (BIT(14))
|
|
|
-#define RMT_AFIFO_RST_CH7_M (BIT(14))
|
|
|
-#define RMT_AFIFO_RST_CH7_V 0x1
|
|
|
-#define RMT_AFIFO_RST_CH7_S 14
|
|
|
-/* RMT_MEM_RX_WRAP_EN_CH7 : R/W ;bitpos:[13] ;default: 1'b0 ; */
|
|
|
-/*description: This is the channel $m enable bit for wraparound mode: it will resume receiving
|
|
|
-at the start when the data to be received is more than its memory size..*/
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH7 (BIT(13))
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH7_M (BIT(13))
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH7_V 0x1
|
|
|
-#define RMT_MEM_RX_WRAP_EN_CH7_S 13
|
|
|
-/* RMT_RX_FILTER_THRES_CH7 : R/W ;bitpos:[12:5] ;default: 8'hf ; */
|
|
|
-/*description: Ignores the input pulse when its width is smaller than this register value in AP
|
|
|
-B clock periods (in receive mode)..*/
|
|
|
-#define RMT_RX_FILTER_THRES_CH7 0x000000FF
|
|
|
-#define RMT_RX_FILTER_THRES_CH7_M ((RMT_RX_FILTER_THRES_CH7_V)<<(RMT_RX_FILTER_THRES_CH7_S))
|
|
|
-#define RMT_RX_FILTER_THRES_CH7_V 0xFF
|
|
|
-#define RMT_RX_FILTER_THRES_CH7_S 5
|
|
|
-/* RMT_RX_FILTER_EN_CH7 : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: This is the receive filter's enable bit for CHANNEL$m..*/
|
|
|
-#define RMT_RX_FILTER_EN_CH7 (BIT(4))
|
|
|
-#define RMT_RX_FILTER_EN_CH7_M (BIT(4))
|
|
|
-#define RMT_RX_FILTER_EN_CH7_V 0x1
|
|
|
-#define RMT_RX_FILTER_EN_CH7_S 4
|
|
|
-/* RMT_MEM_OWNER_CH7 : R/W/SC ;bitpos:[3] ;default: 1'b1 ; */
|
|
|
-/*description: This register marks the ownership of CHANNEL$m's ram block.; ; 1'h1: Receiver is
|
|
|
- using the ram. ; ; 1'h0: APB bus is using the ram..*/
|
|
|
-#define RMT_MEM_OWNER_CH7 (BIT(3))
|
|
|
-#define RMT_MEM_OWNER_CH7_M (BIT(3))
|
|
|
-#define RMT_MEM_OWNER_CH7_V 0x1
|
|
|
-#define RMT_MEM_OWNER_CH7_S 3
|
|
|
-/* RMT_APB_MEM_RST_CH7 : WT ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to reset W/R ram address for CHANNEL$m by accessing apb fifo..*/
|
|
|
-#define RMT_APB_MEM_RST_CH7 (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH7_M (BIT(2))
|
|
|
-#define RMT_APB_MEM_RST_CH7_V 0x1
|
|
|
-#define RMT_APB_MEM_RST_CH7_S 2
|
|
|
-/* RMT_MEM_WR_RST_CH7 : WT ;bitpos:[1] ;default: 1'h0 ; */
|
|
|
-/*description: Set this bit to reset write ram address for CHANNEL$m by accessing receiver..*/
|
|
|
-#define RMT_MEM_WR_RST_CH7 (BIT(1))
|
|
|
-#define RMT_MEM_WR_RST_CH7_M (BIT(1))
|
|
|
-#define RMT_MEM_WR_RST_CH7_V 0x1
|
|
|
-#define RMT_MEM_WR_RST_CH7_S 1
|
|
|
-/* RMT_RX_EN_CH7 : R/W ;bitpos:[0] ;default: 1'h0 ; */
|
|
|
-/*description: Set this bit to enable receiver to receive data on CHANNEL$m..*/
|
|
|
-#define RMT_RX_EN_CH7 (BIT(0))
|
|
|
-#define RMT_RX_EN_CH7_M (BIT(0))
|
|
|
-#define RMT_RX_EN_CH7_V 0x1
|
|
|
-#define RMT_RX_EN_CH7_S 0
|
|
|
+/** RMT_CH7CONF1_REG register
|
|
|
+ * Channel 7 configure register 1
|
|
|
+ */
|
|
|
+#define RMT_CH7CONF1_REG (DR_REG_RMT_BASE + 0x4c)
|
|
|
+/** RMT_RX_EN_7 : R/W; bitpos: [0]; default: 0;
|
|
|
+ * Set this bit to enable receiver to receive data on CHANNEL7.
|
|
|
+ */
|
|
|
+#define RMT_RX_EN_7 (BIT(0))
|
|
|
+#define RMT_RX_EN_7_M (RMT_RX_EN_7_V << RMT_RX_EN_7_S)
|
|
|
+#define RMT_RX_EN_7_V 0x00000001U
|
|
|
+#define RMT_RX_EN_7_S 0
|
|
|
+/** RMT_MEM_WR_RST_7 : WT; bitpos: [1]; default: 0;
|
|
|
+ * Set this bit to reset write ram address for CHANNEL7 by accessing receiver.
|
|
|
+ */
|
|
|
+#define RMT_MEM_WR_RST_7 (BIT(1))
|
|
|
+#define RMT_MEM_WR_RST_7_M (RMT_MEM_WR_RST_7_V << RMT_MEM_WR_RST_7_S)
|
|
|
+#define RMT_MEM_WR_RST_7_V 0x00000001U
|
|
|
+#define RMT_MEM_WR_RST_7_S 1
|
|
|
+/** RMT_APB_MEM_RST_7 : WT; bitpos: [2]; default: 0;
|
|
|
+ * Set this bit to reset W/R ram address for CHANNEL7 by accessing apb fifo.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RST_7 (BIT(2))
|
|
|
+#define RMT_APB_MEM_RST_7_M (RMT_APB_MEM_RST_7_V << RMT_APB_MEM_RST_7_S)
|
|
|
+#define RMT_APB_MEM_RST_7_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_RST_7_S 2
|
|
|
+/** RMT_MEM_OWNER_7 : R/W/SC; bitpos: [3]; default: 1;
|
|
|
+ * This register marks the ownership of CHANNEL7's ram block.
|
|
|
+ *
|
|
|
+ * 1'h1: Receiver is using the ram.
|
|
|
+ *
|
|
|
+ * 1'h0: APB bus is using the ram.
|
|
|
+ */
|
|
|
+#define RMT_MEM_OWNER_7 (BIT(3))
|
|
|
+#define RMT_MEM_OWNER_7_M (RMT_MEM_OWNER_7_V << RMT_MEM_OWNER_7_S)
|
|
|
+#define RMT_MEM_OWNER_7_V 0x00000001U
|
|
|
+#define RMT_MEM_OWNER_7_S 3
|
|
|
+/** RMT_RX_FILTER_EN_7 : R/W; bitpos: [4]; default: 0;
|
|
|
+ * This is the receive filter's enable bit for CHANNEL7.
|
|
|
+ */
|
|
|
+#define RMT_RX_FILTER_EN_7 (BIT(4))
|
|
|
+#define RMT_RX_FILTER_EN_7_M (RMT_RX_FILTER_EN_7_V << RMT_RX_FILTER_EN_7_S)
|
|
|
+#define RMT_RX_FILTER_EN_7_V 0x00000001U
|
|
|
+#define RMT_RX_FILTER_EN_7_S 4
|
|
|
+/** RMT_RX_FILTER_THRES_7 : R/W; bitpos: [12:5]; default: 15;
|
|
|
+ * Ignores the input pulse when its width is smaller than this register value in APB
|
|
|
+ * clock periods (in receive mode).
|
|
|
+ */
|
|
|
+#define RMT_RX_FILTER_THRES_7 0x000000FFU
|
|
|
+#define RMT_RX_FILTER_THRES_7_M (RMT_RX_FILTER_THRES_7_V << RMT_RX_FILTER_THRES_7_S)
|
|
|
+#define RMT_RX_FILTER_THRES_7_V 0x000000FFU
|
|
|
+#define RMT_RX_FILTER_THRES_7_S 5
|
|
|
+/** RMT_MEM_RX_WRAP_EN_7 : R/W; bitpos: [13]; default: 0;
|
|
|
+ * This is the channel 7 enable bit for wraparound mode: it will resume receiving at
|
|
|
+ * the start when the data to be received is more than its memory size.
|
|
|
+ */
|
|
|
+#define RMT_MEM_RX_WRAP_EN_7 (BIT(13))
|
|
|
+#define RMT_MEM_RX_WRAP_EN_7_M (RMT_MEM_RX_WRAP_EN_7_V << RMT_MEM_RX_WRAP_EN_7_S)
|
|
|
+#define RMT_MEM_RX_WRAP_EN_7_V 0x00000001U
|
|
|
+#define RMT_MEM_RX_WRAP_EN_7_S 13
|
|
|
+/** RMT_AFIFO_RST_7 : WT; bitpos: [14]; default: 0;
|
|
|
+ * Reserved
|
|
|
+ */
|
|
|
+#define RMT_AFIFO_RST_7 (BIT(14))
|
|
|
+#define RMT_AFIFO_RST_7_M (RMT_AFIFO_RST_7_V << RMT_AFIFO_RST_7_S)
|
|
|
+#define RMT_AFIFO_RST_7_V 0x00000001U
|
|
|
+#define RMT_AFIFO_RST_7_S 14
|
|
|
+/** RMT_CONF_UPDATE_7 : WT; bitpos: [15]; default: 0;
|
|
|
+ * synchronization bit for CHANNEL7
|
|
|
+ */
|
|
|
+#define RMT_CONF_UPDATE_7 (BIT(15))
|
|
|
+#define RMT_CONF_UPDATE_7_M (RMT_CONF_UPDATE_7_V << RMT_CONF_UPDATE_7_S)
|
|
|
+#define RMT_CONF_UPDATE_7_V 0x00000001U
|
|
|
+#define RMT_CONF_UPDATE_7_S 15
|
|
|
|
|
|
-#define RMT_CH0STATUS_REG (DR_REG_RMT_BASE + 0x50)
|
|
|
-/* RMT_APB_MEM_WR_ERR_CH0 : RO ;bitpos:[26] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set if the offset address out of memory size when writes
|
|
|
- via APB bus..*/
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH0 (BIT(26))
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH0_M (BIT(26))
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH0_V 0x1
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH0_S 26
|
|
|
-/* RMT_MEM_EMPTY_CH0 : RO ;bitpos:[25] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set when the data to be set is more than memory size and
|
|
|
- the wraparound mode is disabled..*/
|
|
|
-#define RMT_MEM_EMPTY_CH0 (BIT(25))
|
|
|
-#define RMT_MEM_EMPTY_CH0_M (BIT(25))
|
|
|
-#define RMT_MEM_EMPTY_CH0_V 0x1
|
|
|
-#define RMT_MEM_EMPTY_CH0_S 25
|
|
|
-/* RMT_STATE_CH0 : RO ;bitpos:[24:22] ;default: 3'b0 ; */
|
|
|
-/*description: This register records the FSM status of CHANNEL$n..*/
|
|
|
-#define RMT_STATE_CH0 0x00000007
|
|
|
-#define RMT_STATE_CH0_M ((RMT_STATE_CH0_V)<<(RMT_STATE_CH0_S))
|
|
|
-#define RMT_STATE_CH0_V 0x7
|
|
|
-#define RMT_STATE_CH0_S 22
|
|
|
-/* RMT_APB_MEM_WADDR_CH0 : RO ;bitpos:[20:11] ;default: 10'b0 ; */
|
|
|
-/*description: This register records the memory address offset when writes RAM over APB bus..*/
|
|
|
-#define RMT_APB_MEM_WADDR_CH0 0x000003FF
|
|
|
-#define RMT_APB_MEM_WADDR_CH0_M ((RMT_APB_MEM_WADDR_CH0_V)<<(RMT_APB_MEM_WADDR_CH0_S))
|
|
|
-#define RMT_APB_MEM_WADDR_CH0_V 0x3FF
|
|
|
-#define RMT_APB_MEM_WADDR_CH0_S 11
|
|
|
-/* RMT_MEM_RADDR_EX_CH0 : RO ;bitpos:[9:0] ;default: 10'b0 ; */
|
|
|
-/*description: This register records the memory address offset when transmitter of CHANNEL$n is
|
|
|
- using the RAM..*/
|
|
|
-#define RMT_MEM_RADDR_EX_CH0 0x000003FF
|
|
|
-#define RMT_MEM_RADDR_EX_CH0_M ((RMT_MEM_RADDR_EX_CH0_V)<<(RMT_MEM_RADDR_EX_CH0_S))
|
|
|
-#define RMT_MEM_RADDR_EX_CH0_V 0x3FF
|
|
|
-#define RMT_MEM_RADDR_EX_CH0_S 0
|
|
|
+/** RMT_CH0STATUS_REG register
|
|
|
+ * Channel 0 status register
|
|
|
+ */
|
|
|
+#define RMT_CH0STATUS_REG (DR_REG_RMT_BASE + 0x50)
|
|
|
+/** RMT_MEM_RADDR_EX_0 : RO; bitpos: [9:0]; default: 0;
|
|
|
+ * This register records the memory address offset when transmitter of CHANNEL0 is
|
|
|
+ * using the RAM.
|
|
|
+ */
|
|
|
+#define RMT_MEM_RADDR_EX_0 0x000003FFU
|
|
|
+#define RMT_MEM_RADDR_EX_0_M (RMT_MEM_RADDR_EX_0_V << RMT_MEM_RADDR_EX_0_S)
|
|
|
+#define RMT_MEM_RADDR_EX_0_V 0x000003FFU
|
|
|
+#define RMT_MEM_RADDR_EX_0_S 0
|
|
|
+/** RMT_APB_MEM_WADDR_0 : RO; bitpos: [20:11]; default: 0;
|
|
|
+ * This register records the memory address offset when writes RAM over APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_WADDR_0 0x000003FFU
|
|
|
+#define RMT_APB_MEM_WADDR_0_M (RMT_APB_MEM_WADDR_0_V << RMT_APB_MEM_WADDR_0_S)
|
|
|
+#define RMT_APB_MEM_WADDR_0_V 0x000003FFU
|
|
|
+#define RMT_APB_MEM_WADDR_0_S 11
|
|
|
+/** RMT_STATE_0 : RO; bitpos: [24:22]; default: 0;
|
|
|
+ * This register records the FSM status of CHANNEL0.
|
|
|
+ */
|
|
|
+#define RMT_STATE_0 0x00000007U
|
|
|
+#define RMT_STATE_0_M (RMT_STATE_0_V << RMT_STATE_0_S)
|
|
|
+#define RMT_STATE_0_V 0x00000007U
|
|
|
+#define RMT_STATE_0_S 22
|
|
|
+/** RMT_MEM_EMPTY_0 : RO; bitpos: [25]; default: 0;
|
|
|
+ * This status bit will be set when the data to be set is more than memory size and
|
|
|
+ * the wraparound mode is disabled.
|
|
|
+ */
|
|
|
+#define RMT_MEM_EMPTY_0 (BIT(25))
|
|
|
+#define RMT_MEM_EMPTY_0_M (RMT_MEM_EMPTY_0_V << RMT_MEM_EMPTY_0_S)
|
|
|
+#define RMT_MEM_EMPTY_0_V 0x00000001U
|
|
|
+#define RMT_MEM_EMPTY_0_S 25
|
|
|
+/** RMT_APB_MEM_WR_ERR_0 : RO; bitpos: [26]; default: 0;
|
|
|
+ * This status bit will be set if the offset address out of memory size when writes
|
|
|
+ * via APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_WR_ERR_0 (BIT(26))
|
|
|
+#define RMT_APB_MEM_WR_ERR_0_M (RMT_APB_MEM_WR_ERR_0_V << RMT_APB_MEM_WR_ERR_0_S)
|
|
|
+#define RMT_APB_MEM_WR_ERR_0_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_WR_ERR_0_S 26
|
|
|
|
|
|
-#define RMT_CH1STATUS_REG (DR_REG_RMT_BASE + 0x54)
|
|
|
-/* RMT_APB_MEM_WR_ERR_CH1 : RO ;bitpos:[26] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set if the offset address out of memory size when writes
|
|
|
- via APB bus..*/
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH1 (BIT(26))
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH1_M (BIT(26))
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH1_V 0x1
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH1_S 26
|
|
|
-/* RMT_MEM_EMPTY_CH1 : RO ;bitpos:[25] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set when the data to be set is more than memory size and
|
|
|
- the wraparound mode is disabled..*/
|
|
|
-#define RMT_MEM_EMPTY_CH1 (BIT(25))
|
|
|
-#define RMT_MEM_EMPTY_CH1_M (BIT(25))
|
|
|
-#define RMT_MEM_EMPTY_CH1_V 0x1
|
|
|
-#define RMT_MEM_EMPTY_CH1_S 25
|
|
|
-/* RMT_STATE_CH1 : RO ;bitpos:[24:22] ;default: 3'b0 ; */
|
|
|
-/*description: This register records the FSM status of CHANNEL$n..*/
|
|
|
-#define RMT_STATE_CH1 0x00000007
|
|
|
-#define RMT_STATE_CH1_M ((RMT_STATE_CH1_V)<<(RMT_STATE_CH1_S))
|
|
|
-#define RMT_STATE_CH1_V 0x7
|
|
|
-#define RMT_STATE_CH1_S 22
|
|
|
-/* RMT_APB_MEM_WADDR_CH1 : RO ;bitpos:[20:11] ;default: 10'h30 ; */
|
|
|
-/*description: This register records the memory address offset when writes RAM over APB bus..*/
|
|
|
-#define RMT_APB_MEM_WADDR_CH1 0x000003FF
|
|
|
-#define RMT_APB_MEM_WADDR_CH1_M ((RMT_APB_MEM_WADDR_CH1_V)<<(RMT_APB_MEM_WADDR_CH1_S))
|
|
|
-#define RMT_APB_MEM_WADDR_CH1_V 0x3FF
|
|
|
-#define RMT_APB_MEM_WADDR_CH1_S 11
|
|
|
-/* RMT_MEM_RADDR_EX_CH1 : RO ;bitpos:[9:0] ;default: 10'h30 ; */
|
|
|
-/*description: This register records the memory address offset when transmitter of CHANNEL$n is
|
|
|
- using the RAM..*/
|
|
|
-#define RMT_MEM_RADDR_EX_CH1 0x000003FF
|
|
|
-#define RMT_MEM_RADDR_EX_CH1_M ((RMT_MEM_RADDR_EX_CH1_V)<<(RMT_MEM_RADDR_EX_CH1_S))
|
|
|
-#define RMT_MEM_RADDR_EX_CH1_V 0x3FF
|
|
|
-#define RMT_MEM_RADDR_EX_CH1_S 0
|
|
|
+/** RMT_CH1STATUS_REG register
|
|
|
+ * Channel 1 status register
|
|
|
+ */
|
|
|
+#define RMT_CH1STATUS_REG (DR_REG_RMT_BASE + 0x54)
|
|
|
+/** RMT_MEM_RADDR_EX_1 : RO; bitpos: [9:0]; default: 0;
|
|
|
+ * This register records the memory address offset when transmitter of CHANNEL1 is
|
|
|
+ * using the RAM.
|
|
|
+ */
|
|
|
+#define RMT_MEM_RADDR_EX_1 0x000003FFU
|
|
|
+#define RMT_MEM_RADDR_EX_1_M (RMT_MEM_RADDR_EX_1_V << RMT_MEM_RADDR_EX_1_S)
|
|
|
+#define RMT_MEM_RADDR_EX_1_V 0x000003FFU
|
|
|
+#define RMT_MEM_RADDR_EX_1_S 0
|
|
|
+/** RMT_APB_MEM_WADDR_1 : RO; bitpos: [20:11]; default: 0;
|
|
|
+ * This register records the memory address offset when writes RAM over APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_WADDR_1 0x000003FFU
|
|
|
+#define RMT_APB_MEM_WADDR_1_M (RMT_APB_MEM_WADDR_1_V << RMT_APB_MEM_WADDR_1_S)
|
|
|
+#define RMT_APB_MEM_WADDR_1_V 0x000003FFU
|
|
|
+#define RMT_APB_MEM_WADDR_1_S 11
|
|
|
+/** RMT_STATE_1 : RO; bitpos: [24:22]; default: 0;
|
|
|
+ * This register records the FSM status of CHANNEL1.
|
|
|
+ */
|
|
|
+#define RMT_STATE_1 0x00000007U
|
|
|
+#define RMT_STATE_1_M (RMT_STATE_1_V << RMT_STATE_1_S)
|
|
|
+#define RMT_STATE_1_V 0x00000007U
|
|
|
+#define RMT_STATE_1_S 22
|
|
|
+/** RMT_MEM_EMPTY_1 : RO; bitpos: [25]; default: 0;
|
|
|
+ * This status bit will be set when the data to be set is more than memory size and
|
|
|
+ * the wraparound mode is disabled.
|
|
|
+ */
|
|
|
+#define RMT_MEM_EMPTY_1 (BIT(25))
|
|
|
+#define RMT_MEM_EMPTY_1_M (RMT_MEM_EMPTY_1_V << RMT_MEM_EMPTY_1_S)
|
|
|
+#define RMT_MEM_EMPTY_1_V 0x00000001U
|
|
|
+#define RMT_MEM_EMPTY_1_S 25
|
|
|
+/** RMT_APB_MEM_WR_ERR_1 : RO; bitpos: [26]; default: 0;
|
|
|
+ * This status bit will be set if the offset address out of memory size when writes
|
|
|
+ * via APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_WR_ERR_1 (BIT(26))
|
|
|
+#define RMT_APB_MEM_WR_ERR_1_M (RMT_APB_MEM_WR_ERR_1_V << RMT_APB_MEM_WR_ERR_1_S)
|
|
|
+#define RMT_APB_MEM_WR_ERR_1_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_WR_ERR_1_S 26
|
|
|
|
|
|
-#define RMT_CH2STATUS_REG (DR_REG_RMT_BASE + 0x58)
|
|
|
-/* RMT_APB_MEM_WR_ERR_CH2 : RO ;bitpos:[26] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set if the offset address out of memory size when writes
|
|
|
- via APB bus..*/
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH2 (BIT(26))
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH2_M (BIT(26))
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH2_V 0x1
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH2_S 26
|
|
|
-/* RMT_MEM_EMPTY_CH2 : RO ;bitpos:[25] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set when the data to be set is more than memory size and
|
|
|
- the wraparound mode is disabled..*/
|
|
|
-#define RMT_MEM_EMPTY_CH2 (BIT(25))
|
|
|
-#define RMT_MEM_EMPTY_CH2_M (BIT(25))
|
|
|
-#define RMT_MEM_EMPTY_CH2_V 0x1
|
|
|
-#define RMT_MEM_EMPTY_CH2_S 25
|
|
|
-/* RMT_STATE_CH2 : RO ;bitpos:[24:22] ;default: 3'b0 ; */
|
|
|
-/*description: This register records the FSM status of CHANNEL$n..*/
|
|
|
-#define RMT_STATE_CH2 0x00000007
|
|
|
-#define RMT_STATE_CH2_M ((RMT_STATE_CH2_V)<<(RMT_STATE_CH2_S))
|
|
|
-#define RMT_STATE_CH2_V 0x7
|
|
|
-#define RMT_STATE_CH2_S 22
|
|
|
-/* RMT_APB_MEM_WADDR_CH2 : RO ;bitpos:[20:11] ;default: 10'h60 ; */
|
|
|
-/*description: This register records the memory address offset when writes RAM over APB bus..*/
|
|
|
-#define RMT_APB_MEM_WADDR_CH2 0x000003FF
|
|
|
-#define RMT_APB_MEM_WADDR_CH2_M ((RMT_APB_MEM_WADDR_CH2_V)<<(RMT_APB_MEM_WADDR_CH2_S))
|
|
|
-#define RMT_APB_MEM_WADDR_CH2_V 0x3FF
|
|
|
-#define RMT_APB_MEM_WADDR_CH2_S 11
|
|
|
-/* RMT_MEM_RADDR_EX_CH2 : RO ;bitpos:[9:0] ;default: 10'h60 ; */
|
|
|
-/*description: This register records the memory address offset when transmitter of CHANNEL$n is
|
|
|
- using the RAM..*/
|
|
|
-#define RMT_MEM_RADDR_EX_CH2 0x000003FF
|
|
|
-#define RMT_MEM_RADDR_EX_CH2_M ((RMT_MEM_RADDR_EX_CH2_V)<<(RMT_MEM_RADDR_EX_CH2_S))
|
|
|
-#define RMT_MEM_RADDR_EX_CH2_V 0x3FF
|
|
|
-#define RMT_MEM_RADDR_EX_CH2_S 0
|
|
|
+/** RMT_CH2STATUS_REG register
|
|
|
+ * Channel 2 status register
|
|
|
+ */
|
|
|
+#define RMT_CH2STATUS_REG (DR_REG_RMT_BASE + 0x58)
|
|
|
+/** RMT_MEM_RADDR_EX_2 : RO; bitpos: [9:0]; default: 0;
|
|
|
+ * This register records the memory address offset when transmitter of CHANNEL2 is
|
|
|
+ * using the RAM.
|
|
|
+ */
|
|
|
+#define RMT_MEM_RADDR_EX_2 0x000003FFU
|
|
|
+#define RMT_MEM_RADDR_EX_2_M (RMT_MEM_RADDR_EX_2_V << RMT_MEM_RADDR_EX_2_S)
|
|
|
+#define RMT_MEM_RADDR_EX_2_V 0x000003FFU
|
|
|
+#define RMT_MEM_RADDR_EX_2_S 0
|
|
|
+/** RMT_APB_MEM_WADDR_2 : RO; bitpos: [20:11]; default: 0;
|
|
|
+ * This register records the memory address offset when writes RAM over APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_WADDR_2 0x000003FFU
|
|
|
+#define RMT_APB_MEM_WADDR_2_M (RMT_APB_MEM_WADDR_2_V << RMT_APB_MEM_WADDR_2_S)
|
|
|
+#define RMT_APB_MEM_WADDR_2_V 0x000003FFU
|
|
|
+#define RMT_APB_MEM_WADDR_2_S 11
|
|
|
+/** RMT_STATE_2 : RO; bitpos: [24:22]; default: 0;
|
|
|
+ * This register records the FSM status of CHANNEL2.
|
|
|
+ */
|
|
|
+#define RMT_STATE_2 0x00000007U
|
|
|
+#define RMT_STATE_2_M (RMT_STATE_2_V << RMT_STATE_2_S)
|
|
|
+#define RMT_STATE_2_V 0x00000007U
|
|
|
+#define RMT_STATE_2_S 22
|
|
|
+/** RMT_MEM_EMPTY_2 : RO; bitpos: [25]; default: 0;
|
|
|
+ * This status bit will be set when the data to be set is more than memory size and
|
|
|
+ * the wraparound mode is disabled.
|
|
|
+ */
|
|
|
+#define RMT_MEM_EMPTY_2 (BIT(25))
|
|
|
+#define RMT_MEM_EMPTY_2_M (RMT_MEM_EMPTY_2_V << RMT_MEM_EMPTY_2_S)
|
|
|
+#define RMT_MEM_EMPTY_2_V 0x00000001U
|
|
|
+#define RMT_MEM_EMPTY_2_S 25
|
|
|
+/** RMT_APB_MEM_WR_ERR_2 : RO; bitpos: [26]; default: 0;
|
|
|
+ * This status bit will be set if the offset address out of memory size when writes
|
|
|
+ * via APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_WR_ERR_2 (BIT(26))
|
|
|
+#define RMT_APB_MEM_WR_ERR_2_M (RMT_APB_MEM_WR_ERR_2_V << RMT_APB_MEM_WR_ERR_2_S)
|
|
|
+#define RMT_APB_MEM_WR_ERR_2_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_WR_ERR_2_S 26
|
|
|
|
|
|
-#define RMT_CH3STATUS_REG (DR_REG_RMT_BASE + 0x5C)
|
|
|
-/* RMT_APB_MEM_WR_ERR_CH3 : RO ;bitpos:[26] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set if the offset address out of memory size when writes
|
|
|
- via APB bus..*/
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH3 (BIT(26))
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH3_M (BIT(26))
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH3_V 0x1
|
|
|
-#define RMT_APB_MEM_WR_ERR_CH3_S 26
|
|
|
-/* RMT_MEM_EMPTY_CH3 : RO ;bitpos:[25] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set when the data to be set is more than memory size and
|
|
|
- the wraparound mode is disabled..*/
|
|
|
-#define RMT_MEM_EMPTY_CH3 (BIT(25))
|
|
|
-#define RMT_MEM_EMPTY_CH3_M (BIT(25))
|
|
|
-#define RMT_MEM_EMPTY_CH3_V 0x1
|
|
|
-#define RMT_MEM_EMPTY_CH3_S 25
|
|
|
-/* RMT_STATE_CH3 : RO ;bitpos:[24:22] ;default: 3'b0 ; */
|
|
|
-/*description: This register records the FSM status of CHANNEL$n..*/
|
|
|
-#define RMT_STATE_CH3 0x00000007
|
|
|
-#define RMT_STATE_CH3_M ((RMT_STATE_CH3_V)<<(RMT_STATE_CH3_S))
|
|
|
-#define RMT_STATE_CH3_V 0x7
|
|
|
-#define RMT_STATE_CH3_S 22
|
|
|
-/* RMT_APB_MEM_WADDR_CH3 : RO ;bitpos:[20:11] ;default: 10'h90 ; */
|
|
|
-/*description: This register records the memory address offset when writes RAM over APB bus..*/
|
|
|
-#define RMT_APB_MEM_WADDR_CH3 0x000003FF
|
|
|
-#define RMT_APB_MEM_WADDR_CH3_M ((RMT_APB_MEM_WADDR_CH3_V)<<(RMT_APB_MEM_WADDR_CH3_S))
|
|
|
-#define RMT_APB_MEM_WADDR_CH3_V 0x3FF
|
|
|
-#define RMT_APB_MEM_WADDR_CH3_S 11
|
|
|
-/* RMT_MEM_RADDR_EX_CH3 : RO ;bitpos:[9:0] ;default: 10'h90 ; */
|
|
|
-/*description: This register records the memory address offset when transmitter of CHANNEL$n is
|
|
|
- using the RAM..*/
|
|
|
-#define RMT_MEM_RADDR_EX_CH3 0x000003FF
|
|
|
-#define RMT_MEM_RADDR_EX_CH3_M ((RMT_MEM_RADDR_EX_CH3_V)<<(RMT_MEM_RADDR_EX_CH3_S))
|
|
|
-#define RMT_MEM_RADDR_EX_CH3_V 0x3FF
|
|
|
-#define RMT_MEM_RADDR_EX_CH3_S 0
|
|
|
+/** RMT_CH3STATUS_REG register
|
|
|
+ * Channel 3 status register
|
|
|
+ */
|
|
|
+#define RMT_CH3STATUS_REG (DR_REG_RMT_BASE + 0x5c)
|
|
|
+/** RMT_MEM_RADDR_EX_3 : RO; bitpos: [9:0]; default: 0;
|
|
|
+ * This register records the memory address offset when transmitter of CHANNEL3 is
|
|
|
+ * using the RAM.
|
|
|
+ */
|
|
|
+#define RMT_MEM_RADDR_EX_3 0x000003FFU
|
|
|
+#define RMT_MEM_RADDR_EX_3_M (RMT_MEM_RADDR_EX_3_V << RMT_MEM_RADDR_EX_3_S)
|
|
|
+#define RMT_MEM_RADDR_EX_3_V 0x000003FFU
|
|
|
+#define RMT_MEM_RADDR_EX_3_S 0
|
|
|
+/** RMT_APB_MEM_WADDR_3 : RO; bitpos: [20:11]; default: 0;
|
|
|
+ * This register records the memory address offset when writes RAM over APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_WADDR_3 0x000003FFU
|
|
|
+#define RMT_APB_MEM_WADDR_3_M (RMT_APB_MEM_WADDR_3_V << RMT_APB_MEM_WADDR_3_S)
|
|
|
+#define RMT_APB_MEM_WADDR_3_V 0x000003FFU
|
|
|
+#define RMT_APB_MEM_WADDR_3_S 11
|
|
|
+/** RMT_STATE_3 : RO; bitpos: [24:22]; default: 0;
|
|
|
+ * This register records the FSM status of CHANNEL3.
|
|
|
+ */
|
|
|
+#define RMT_STATE_3 0x00000007U
|
|
|
+#define RMT_STATE_3_M (RMT_STATE_3_V << RMT_STATE_3_S)
|
|
|
+#define RMT_STATE_3_V 0x00000007U
|
|
|
+#define RMT_STATE_3_S 22
|
|
|
+/** RMT_MEM_EMPTY_3 : RO; bitpos: [25]; default: 0;
|
|
|
+ * This status bit will be set when the data to be set is more than memory size and
|
|
|
+ * the wraparound mode is disabled.
|
|
|
+ */
|
|
|
+#define RMT_MEM_EMPTY_3 (BIT(25))
|
|
|
+#define RMT_MEM_EMPTY_3_M (RMT_MEM_EMPTY_3_V << RMT_MEM_EMPTY_3_S)
|
|
|
+#define RMT_MEM_EMPTY_3_V 0x00000001U
|
|
|
+#define RMT_MEM_EMPTY_3_S 25
|
|
|
+/** RMT_APB_MEM_WR_ERR_3 : RO; bitpos: [26]; default: 0;
|
|
|
+ * This status bit will be set if the offset address out of memory size when writes
|
|
|
+ * via APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_WR_ERR_3 (BIT(26))
|
|
|
+#define RMT_APB_MEM_WR_ERR_3_M (RMT_APB_MEM_WR_ERR_3_V << RMT_APB_MEM_WR_ERR_3_S)
|
|
|
+#define RMT_APB_MEM_WR_ERR_3_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_WR_ERR_3_S 26
|
|
|
|
|
|
-#define RMT_CH4STATUS_REG (DR_REG_RMT_BASE + 0x60)
|
|
|
-/* RMT_APB_MEM_RD_ERR_CH4 : RO ;bitpos:[27] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set if the offset address out of memory size when reads
|
|
|
-via APB bus..*/
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH4 (BIT(27))
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH4_M (BIT(27))
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH4_V 0x1
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH4_S 27
|
|
|
-/* RMT_MEM_FULL_CH4 : RO ;bitpos:[26] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set if the receiver receives more data than the memory s
|
|
|
-ize..*/
|
|
|
-#define RMT_MEM_FULL_CH4 (BIT(26))
|
|
|
-#define RMT_MEM_FULL_CH4_M (BIT(26))
|
|
|
-#define RMT_MEM_FULL_CH4_V 0x1
|
|
|
-#define RMT_MEM_FULL_CH4_S 26
|
|
|
-/* RMT_MEM_OWNER_ERR_CH4 : RO ;bitpos:[25] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set when the ownership of memory block is wrong..*/
|
|
|
-#define RMT_MEM_OWNER_ERR_CH4 (BIT(25))
|
|
|
-#define RMT_MEM_OWNER_ERR_CH4_M (BIT(25))
|
|
|
-#define RMT_MEM_OWNER_ERR_CH4_V 0x1
|
|
|
-#define RMT_MEM_OWNER_ERR_CH4_S 25
|
|
|
-/* RMT_STATE_CH4 : RO ;bitpos:[24:22] ;default: 3'b0 ; */
|
|
|
-/*description: This register records the FSM status of CHANNEL$m..*/
|
|
|
-#define RMT_STATE_CH4 0x00000007
|
|
|
-#define RMT_STATE_CH4_M ((RMT_STATE_CH4_V)<<(RMT_STATE_CH4_S))
|
|
|
-#define RMT_STATE_CH4_V 0x7
|
|
|
-#define RMT_STATE_CH4_S 22
|
|
|
-/* RMT_APB_MEM_RADDR_CH4 : RO ;bitpos:[20:11] ;default: 10'hc0 ; */
|
|
|
-/*description: This register records the memory address offset when reads RAM over APB bus..*/
|
|
|
-#define RMT_APB_MEM_RADDR_CH4 0x000003FF
|
|
|
-#define RMT_APB_MEM_RADDR_CH4_M ((RMT_APB_MEM_RADDR_CH4_V)<<(RMT_APB_MEM_RADDR_CH4_S))
|
|
|
-#define RMT_APB_MEM_RADDR_CH4_V 0x3FF
|
|
|
-#define RMT_APB_MEM_RADDR_CH4_S 11
|
|
|
-/* RMT_MEM_WADDR_EX_CH4 : RO ;bitpos:[9:0] ;default: 10'hc0 ; */
|
|
|
-/*description: This register records the memory address offset when receiver of CHANNEL$m is us
|
|
|
-ing the RAM..*/
|
|
|
-#define RMT_MEM_WADDR_EX_CH4 0x000003FF
|
|
|
-#define RMT_MEM_WADDR_EX_CH4_M ((RMT_MEM_WADDR_EX_CH4_V)<<(RMT_MEM_WADDR_EX_CH4_S))
|
|
|
-#define RMT_MEM_WADDR_EX_CH4_V 0x3FF
|
|
|
-#define RMT_MEM_WADDR_EX_CH4_S 0
|
|
|
+/** RMT_CH4STATUS_REG register
|
|
|
+ * Channel 4 status register
|
|
|
+ */
|
|
|
+#define RMT_CH4STATUS_REG (DR_REG_RMT_BASE + 0x60)
|
|
|
+/** RMT_MEM_WADDR_EX_4 : RO; bitpos: [9:0]; default: 192;
|
|
|
+ * This register records the memory address offset when receiver of CHANNEL4 is using
|
|
|
+ * the RAM.
|
|
|
+ */
|
|
|
+#define RMT_MEM_WADDR_EX_4 0x000003FFU
|
|
|
+#define RMT_MEM_WADDR_EX_4_M (RMT_MEM_WADDR_EX_4_V << RMT_MEM_WADDR_EX_4_S)
|
|
|
+#define RMT_MEM_WADDR_EX_4_V 0x000003FFU
|
|
|
+#define RMT_MEM_WADDR_EX_4_S 0
|
|
|
+/** RMT_APB_MEM_RADDR_4 : RO; bitpos: [20:11]; default: 192;
|
|
|
+ * This register records the memory address offset when reads RAM over APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RADDR_4 0x000003FFU
|
|
|
+#define RMT_APB_MEM_RADDR_4_M (RMT_APB_MEM_RADDR_4_V << RMT_APB_MEM_RADDR_4_S)
|
|
|
+#define RMT_APB_MEM_RADDR_4_V 0x000003FFU
|
|
|
+#define RMT_APB_MEM_RADDR_4_S 11
|
|
|
+/** RMT_STATE_4 : RO; bitpos: [24:22]; default: 0;
|
|
|
+ * This register records the FSM status of CHANNEL4.
|
|
|
+ */
|
|
|
+#define RMT_STATE_4 0x00000007U
|
|
|
+#define RMT_STATE_4_M (RMT_STATE_4_V << RMT_STATE_4_S)
|
|
|
+#define RMT_STATE_4_V 0x00000007U
|
|
|
+#define RMT_STATE_4_S 22
|
|
|
+/** RMT_MEM_OWNER_ERR_4 : RO; bitpos: [25]; default: 0;
|
|
|
+ * This status bit will be set when the ownership of memory block is wrong.
|
|
|
+ */
|
|
|
+#define RMT_MEM_OWNER_ERR_4 (BIT(25))
|
|
|
+#define RMT_MEM_OWNER_ERR_4_M (RMT_MEM_OWNER_ERR_4_V << RMT_MEM_OWNER_ERR_4_S)
|
|
|
+#define RMT_MEM_OWNER_ERR_4_V 0x00000001U
|
|
|
+#define RMT_MEM_OWNER_ERR_4_S 25
|
|
|
+/** RMT_MEM_FULL_4 : RO; bitpos: [26]; default: 0;
|
|
|
+ * This status bit will be set if the receiver receives more data than the memory size.
|
|
|
+ */
|
|
|
+#define RMT_MEM_FULL_4 (BIT(26))
|
|
|
+#define RMT_MEM_FULL_4_M (RMT_MEM_FULL_4_V << RMT_MEM_FULL_4_S)
|
|
|
+#define RMT_MEM_FULL_4_V 0x00000001U
|
|
|
+#define RMT_MEM_FULL_4_S 26
|
|
|
+/** RMT_APB_MEM_RD_ERR_4 : RO; bitpos: [27]; default: 0;
|
|
|
+ * This status bit will be set if the offset address out of memory size when reads via
|
|
|
+ * APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RD_ERR_4 (BIT(27))
|
|
|
+#define RMT_APB_MEM_RD_ERR_4_M (RMT_APB_MEM_RD_ERR_4_V << RMT_APB_MEM_RD_ERR_4_S)
|
|
|
+#define RMT_APB_MEM_RD_ERR_4_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_RD_ERR_4_S 27
|
|
|
|
|
|
-#define RMT_CH5STATUS_REG (DR_REG_RMT_BASE + 0x64)
|
|
|
-/* RMT_APB_MEM_RD_ERR_CH5 : RO ;bitpos:[27] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set if the offset address out of memory size when reads
|
|
|
-via APB bus..*/
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH5 (BIT(27))
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH5_M (BIT(27))
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH5_V 0x1
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH5_S 27
|
|
|
-/* RMT_MEM_FULL_CH5 : RO ;bitpos:[26] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set if the receiver receives more data than the memory s
|
|
|
-ize..*/
|
|
|
-#define RMT_MEM_FULL_CH5 (BIT(26))
|
|
|
-#define RMT_MEM_FULL_CH5_M (BIT(26))
|
|
|
-#define RMT_MEM_FULL_CH5_V 0x1
|
|
|
-#define RMT_MEM_FULL_CH5_S 26
|
|
|
-/* RMT_MEM_OWNER_ERR_CH5 : RO ;bitpos:[25] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set when the ownership of memory block is wrong..*/
|
|
|
-#define RMT_MEM_OWNER_ERR_CH5 (BIT(25))
|
|
|
-#define RMT_MEM_OWNER_ERR_CH5_M (BIT(25))
|
|
|
-#define RMT_MEM_OWNER_ERR_CH5_V 0x1
|
|
|
-#define RMT_MEM_OWNER_ERR_CH5_S 25
|
|
|
-/* RMT_STATE_CH5 : RO ;bitpos:[24:22] ;default: 3'b0 ; */
|
|
|
-/*description: This register records the FSM status of CHANNEL$m..*/
|
|
|
-#define RMT_STATE_CH5 0x00000007
|
|
|
-#define RMT_STATE_CH5_M ((RMT_STATE_CH5_V)<<(RMT_STATE_CH5_S))
|
|
|
-#define RMT_STATE_CH5_V 0x7
|
|
|
-#define RMT_STATE_CH5_S 22
|
|
|
-/* RMT_APB_MEM_RADDR_CH5 : RO ;bitpos:[20:11] ;default: 10'hf0 ; */
|
|
|
-/*description: This register records the memory address offset when reads RAM over APB bus..*/
|
|
|
-#define RMT_APB_MEM_RADDR_CH5 0x000003FF
|
|
|
-#define RMT_APB_MEM_RADDR_CH5_M ((RMT_APB_MEM_RADDR_CH5_V)<<(RMT_APB_MEM_RADDR_CH5_S))
|
|
|
-#define RMT_APB_MEM_RADDR_CH5_V 0x3FF
|
|
|
-#define RMT_APB_MEM_RADDR_CH5_S 11
|
|
|
-/* RMT_MEM_WADDR_EX_CH5 : RO ;bitpos:[9:0] ;default: 10'hf0 ; */
|
|
|
-/*description: This register records the memory address offset when receiver of CHANNEL$m is us
|
|
|
-ing the RAM..*/
|
|
|
-#define RMT_MEM_WADDR_EX_CH5 0x000003FF
|
|
|
-#define RMT_MEM_WADDR_EX_CH5_M ((RMT_MEM_WADDR_EX_CH5_V)<<(RMT_MEM_WADDR_EX_CH5_S))
|
|
|
-#define RMT_MEM_WADDR_EX_CH5_V 0x3FF
|
|
|
-#define RMT_MEM_WADDR_EX_CH5_S 0
|
|
|
+/** RMT_CH5STATUS_REG register
|
|
|
+ * Channel 5 status register
|
|
|
+ */
|
|
|
+#define RMT_CH5STATUS_REG (DR_REG_RMT_BASE + 0x64)
|
|
|
+/** RMT_MEM_WADDR_EX_5 : RO; bitpos: [9:0]; default: 192;
|
|
|
+ * This register records the memory address offset when receiver of CHANNEL5 is using
|
|
|
+ * the RAM.
|
|
|
+ */
|
|
|
+#define RMT_MEM_WADDR_EX_5 0x000003FFU
|
|
|
+#define RMT_MEM_WADDR_EX_5_M (RMT_MEM_WADDR_EX_5_V << RMT_MEM_WADDR_EX_5_S)
|
|
|
+#define RMT_MEM_WADDR_EX_5_V 0x000003FFU
|
|
|
+#define RMT_MEM_WADDR_EX_5_S 0
|
|
|
+/** RMT_APB_MEM_RADDR_5 : RO; bitpos: [20:11]; default: 192;
|
|
|
+ * This register records the memory address offset when reads RAM over APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RADDR_5 0x000003FFU
|
|
|
+#define RMT_APB_MEM_RADDR_5_M (RMT_APB_MEM_RADDR_5_V << RMT_APB_MEM_RADDR_5_S)
|
|
|
+#define RMT_APB_MEM_RADDR_5_V 0x000003FFU
|
|
|
+#define RMT_APB_MEM_RADDR_5_S 11
|
|
|
+/** RMT_STATE_5 : RO; bitpos: [24:22]; default: 0;
|
|
|
+ * This register records the FSM status of CHANNEL5.
|
|
|
+ */
|
|
|
+#define RMT_STATE_5 0x00000007U
|
|
|
+#define RMT_STATE_5_M (RMT_STATE_5_V << RMT_STATE_5_S)
|
|
|
+#define RMT_STATE_5_V 0x00000007U
|
|
|
+#define RMT_STATE_5_S 22
|
|
|
+/** RMT_MEM_OWNER_ERR_5 : RO; bitpos: [25]; default: 0;
|
|
|
+ * This status bit will be set when the ownership of memory block is wrong.
|
|
|
+ */
|
|
|
+#define RMT_MEM_OWNER_ERR_5 (BIT(25))
|
|
|
+#define RMT_MEM_OWNER_ERR_5_M (RMT_MEM_OWNER_ERR_5_V << RMT_MEM_OWNER_ERR_5_S)
|
|
|
+#define RMT_MEM_OWNER_ERR_5_V 0x00000001U
|
|
|
+#define RMT_MEM_OWNER_ERR_5_S 25
|
|
|
+/** RMT_MEM_FULL_5 : RO; bitpos: [26]; default: 0;
|
|
|
+ * This status bit will be set if the receiver receives more data than the memory size.
|
|
|
+ */
|
|
|
+#define RMT_MEM_FULL_5 (BIT(26))
|
|
|
+#define RMT_MEM_FULL_5_M (RMT_MEM_FULL_5_V << RMT_MEM_FULL_5_S)
|
|
|
+#define RMT_MEM_FULL_5_V 0x00000001U
|
|
|
+#define RMT_MEM_FULL_5_S 26
|
|
|
+/** RMT_APB_MEM_RD_ERR_5 : RO; bitpos: [27]; default: 0;
|
|
|
+ * This status bit will be set if the offset address out of memory size when reads via
|
|
|
+ * APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RD_ERR_5 (BIT(27))
|
|
|
+#define RMT_APB_MEM_RD_ERR_5_M (RMT_APB_MEM_RD_ERR_5_V << RMT_APB_MEM_RD_ERR_5_S)
|
|
|
+#define RMT_APB_MEM_RD_ERR_5_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_RD_ERR_5_S 27
|
|
|
|
|
|
-#define RMT_CH6STATUS_REG (DR_REG_RMT_BASE + 0x68)
|
|
|
-/* RMT_APB_MEM_RD_ERR_CH6 : RO ;bitpos:[27] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set if the offset address out of memory size when reads
|
|
|
-via APB bus..*/
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH6 (BIT(27))
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH6_M (BIT(27))
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH6_V 0x1
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH6_S 27
|
|
|
-/* RMT_MEM_FULL_CH6 : RO ;bitpos:[26] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set if the receiver receives more data than the memory s
|
|
|
-ize..*/
|
|
|
-#define RMT_MEM_FULL_CH6 (BIT(26))
|
|
|
-#define RMT_MEM_FULL_CH6_M (BIT(26))
|
|
|
-#define RMT_MEM_FULL_CH6_V 0x1
|
|
|
-#define RMT_MEM_FULL_CH6_S 26
|
|
|
-/* RMT_MEM_OWNER_ERR_CH6 : RO ;bitpos:[25] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set when the ownership of memory block is wrong..*/
|
|
|
-#define RMT_MEM_OWNER_ERR_CH6 (BIT(25))
|
|
|
-#define RMT_MEM_OWNER_ERR_CH6_M (BIT(25))
|
|
|
-#define RMT_MEM_OWNER_ERR_CH6_V 0x1
|
|
|
-#define RMT_MEM_OWNER_ERR_CH6_S 25
|
|
|
-/* RMT_STATE_CH6 : RO ;bitpos:[24:22] ;default: 3'b0 ; */
|
|
|
-/*description: This register records the FSM status of CHANNEL$m..*/
|
|
|
-#define RMT_STATE_CH6 0x00000007
|
|
|
-#define RMT_STATE_CH6_M ((RMT_STATE_CH6_V)<<(RMT_STATE_CH6_S))
|
|
|
-#define RMT_STATE_CH6_V 0x7
|
|
|
-#define RMT_STATE_CH6_S 22
|
|
|
-/* RMT_APB_MEM_RADDR_CH6 : RO ;bitpos:[20:11] ;default: 10'h120 ; */
|
|
|
-/*description: This register records the memory address offset when reads RAM over APB bus..*/
|
|
|
-#define RMT_APB_MEM_RADDR_CH6 0x000003FF
|
|
|
-#define RMT_APB_MEM_RADDR_CH6_M ((RMT_APB_MEM_RADDR_CH6_V)<<(RMT_APB_MEM_RADDR_CH6_S))
|
|
|
-#define RMT_APB_MEM_RADDR_CH6_V 0x3FF
|
|
|
-#define RMT_APB_MEM_RADDR_CH6_S 11
|
|
|
-/* RMT_MEM_WADDR_EX_CH6 : RO ;bitpos:[9:0] ;default: 10'h120 ; */
|
|
|
-/*description: This register records the memory address offset when receiver of CHANNEL$m is us
|
|
|
-ing the RAM..*/
|
|
|
-#define RMT_MEM_WADDR_EX_CH6 0x000003FF
|
|
|
-#define RMT_MEM_WADDR_EX_CH6_M ((RMT_MEM_WADDR_EX_CH6_V)<<(RMT_MEM_WADDR_EX_CH6_S))
|
|
|
-#define RMT_MEM_WADDR_EX_CH6_V 0x3FF
|
|
|
-#define RMT_MEM_WADDR_EX_CH6_S 0
|
|
|
+/** RMT_CH6STATUS_REG register
|
|
|
+ * Channel 6 status register
|
|
|
+ */
|
|
|
+#define RMT_CH6STATUS_REG (DR_REG_RMT_BASE + 0x68)
|
|
|
+/** RMT_MEM_WADDR_EX_6 : RO; bitpos: [9:0]; default: 192;
|
|
|
+ * This register records the memory address offset when receiver of CHANNEL6 is using
|
|
|
+ * the RAM.
|
|
|
+ */
|
|
|
+#define RMT_MEM_WADDR_EX_6 0x000003FFU
|
|
|
+#define RMT_MEM_WADDR_EX_6_M (RMT_MEM_WADDR_EX_6_V << RMT_MEM_WADDR_EX_6_S)
|
|
|
+#define RMT_MEM_WADDR_EX_6_V 0x000003FFU
|
|
|
+#define RMT_MEM_WADDR_EX_6_S 0
|
|
|
+/** RMT_APB_MEM_RADDR_6 : RO; bitpos: [20:11]; default: 192;
|
|
|
+ * This register records the memory address offset when reads RAM over APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RADDR_6 0x000003FFU
|
|
|
+#define RMT_APB_MEM_RADDR_6_M (RMT_APB_MEM_RADDR_6_V << RMT_APB_MEM_RADDR_6_S)
|
|
|
+#define RMT_APB_MEM_RADDR_6_V 0x000003FFU
|
|
|
+#define RMT_APB_MEM_RADDR_6_S 11
|
|
|
+/** RMT_STATE_6 : RO; bitpos: [24:22]; default: 0;
|
|
|
+ * This register records the FSM status of CHANNEL6.
|
|
|
+ */
|
|
|
+#define RMT_STATE_6 0x00000007U
|
|
|
+#define RMT_STATE_6_M (RMT_STATE_6_V << RMT_STATE_6_S)
|
|
|
+#define RMT_STATE_6_V 0x00000007U
|
|
|
+#define RMT_STATE_6_S 22
|
|
|
+/** RMT_MEM_OWNER_ERR_6 : RO; bitpos: [25]; default: 0;
|
|
|
+ * This status bit will be set when the ownership of memory block is wrong.
|
|
|
+ */
|
|
|
+#define RMT_MEM_OWNER_ERR_6 (BIT(25))
|
|
|
+#define RMT_MEM_OWNER_ERR_6_M (RMT_MEM_OWNER_ERR_6_V << RMT_MEM_OWNER_ERR_6_S)
|
|
|
+#define RMT_MEM_OWNER_ERR_6_V 0x00000001U
|
|
|
+#define RMT_MEM_OWNER_ERR_6_S 25
|
|
|
+/** RMT_MEM_FULL_6 : RO; bitpos: [26]; default: 0;
|
|
|
+ * This status bit will be set if the receiver receives more data than the memory size.
|
|
|
+ */
|
|
|
+#define RMT_MEM_FULL_6 (BIT(26))
|
|
|
+#define RMT_MEM_FULL_6_M (RMT_MEM_FULL_6_V << RMT_MEM_FULL_6_S)
|
|
|
+#define RMT_MEM_FULL_6_V 0x00000001U
|
|
|
+#define RMT_MEM_FULL_6_S 26
|
|
|
+/** RMT_APB_MEM_RD_ERR_6 : RO; bitpos: [27]; default: 0;
|
|
|
+ * This status bit will be set if the offset address out of memory size when reads via
|
|
|
+ * APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RD_ERR_6 (BIT(27))
|
|
|
+#define RMT_APB_MEM_RD_ERR_6_M (RMT_APB_MEM_RD_ERR_6_V << RMT_APB_MEM_RD_ERR_6_S)
|
|
|
+#define RMT_APB_MEM_RD_ERR_6_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_RD_ERR_6_S 27
|
|
|
|
|
|
-#define RMT_CH7STATUS_REG (DR_REG_RMT_BASE + 0x6C)
|
|
|
-/* RMT_APB_MEM_RD_ERR_CH7 : RO ;bitpos:[27] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set if the offset address out of memory size when reads
|
|
|
-via APB bus..*/
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH7 (BIT(27))
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH7_M (BIT(27))
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH7_V 0x1
|
|
|
-#define RMT_APB_MEM_RD_ERR_CH7_S 27
|
|
|
-/* RMT_MEM_FULL_CH7 : RO ;bitpos:[26] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set if the receiver receives more data than the memory s
|
|
|
-ize..*/
|
|
|
-#define RMT_MEM_FULL_CH7 (BIT(26))
|
|
|
-#define RMT_MEM_FULL_CH7_M (BIT(26))
|
|
|
-#define RMT_MEM_FULL_CH7_V 0x1
|
|
|
-#define RMT_MEM_FULL_CH7_S 26
|
|
|
-/* RMT_MEM_OWNER_ERR_CH7 : RO ;bitpos:[25] ;default: 1'b0 ; */
|
|
|
-/*description: This status bit will be set when the ownership of memory block is wrong..*/
|
|
|
-#define RMT_MEM_OWNER_ERR_CH7 (BIT(25))
|
|
|
-#define RMT_MEM_OWNER_ERR_CH7_M (BIT(25))
|
|
|
-#define RMT_MEM_OWNER_ERR_CH7_V 0x1
|
|
|
-#define RMT_MEM_OWNER_ERR_CH7_S 25
|
|
|
-/* RMT_STATE_CH7 : RO ;bitpos:[24:22] ;default: 3'b0 ; */
|
|
|
-/*description: This register records the FSM status of CHANNEL$m..*/
|
|
|
-#define RMT_STATE_CH7 0x00000007
|
|
|
-#define RMT_STATE_CH7_M ((RMT_STATE_CH7_V)<<(RMT_STATE_CH7_S))
|
|
|
-#define RMT_STATE_CH7_V 0x7
|
|
|
-#define RMT_STATE_CH7_S 22
|
|
|
-/* RMT_APB_MEM_RADDR_CH7 : RO ;bitpos:[20:11] ;default: 10'h150 ; */
|
|
|
-/*description: This register records the memory address offset when reads RAM over APB bus..*/
|
|
|
-#define RMT_APB_MEM_RADDR_CH7 0x000003FF
|
|
|
-#define RMT_APB_MEM_RADDR_CH7_M ((RMT_APB_MEM_RADDR_CH7_V)<<(RMT_APB_MEM_RADDR_CH7_S))
|
|
|
-#define RMT_APB_MEM_RADDR_CH7_V 0x3FF
|
|
|
-#define RMT_APB_MEM_RADDR_CH7_S 11
|
|
|
-/* RMT_MEM_WADDR_EX_CH7 : RO ;bitpos:[9:0] ;default: 10'h150 ; */
|
|
|
-/*description: This register records the memory address offset when receiver of CHANNEL$m is us
|
|
|
-ing the RAM..*/
|
|
|
-#define RMT_MEM_WADDR_EX_CH7 0x000003FF
|
|
|
-#define RMT_MEM_WADDR_EX_CH7_M ((RMT_MEM_WADDR_EX_CH7_V)<<(RMT_MEM_WADDR_EX_CH7_S))
|
|
|
-#define RMT_MEM_WADDR_EX_CH7_V 0x3FF
|
|
|
-#define RMT_MEM_WADDR_EX_CH7_S 0
|
|
|
+/** RMT_CH7STATUS_REG register
|
|
|
+ * Channel 7 status register
|
|
|
+ */
|
|
|
+#define RMT_CH7STATUS_REG (DR_REG_RMT_BASE + 0x6c)
|
|
|
+/** RMT_MEM_WADDR_EX_7 : RO; bitpos: [9:0]; default: 192;
|
|
|
+ * This register records the memory address offset when receiver of CHANNEL7 is using
|
|
|
+ * the RAM.
|
|
|
+ */
|
|
|
+#define RMT_MEM_WADDR_EX_7 0x000003FFU
|
|
|
+#define RMT_MEM_WADDR_EX_7_M (RMT_MEM_WADDR_EX_7_V << RMT_MEM_WADDR_EX_7_S)
|
|
|
+#define RMT_MEM_WADDR_EX_7_V 0x000003FFU
|
|
|
+#define RMT_MEM_WADDR_EX_7_S 0
|
|
|
+/** RMT_APB_MEM_RADDR_7 : RO; bitpos: [20:11]; default: 192;
|
|
|
+ * This register records the memory address offset when reads RAM over APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RADDR_7 0x000003FFU
|
|
|
+#define RMT_APB_MEM_RADDR_7_M (RMT_APB_MEM_RADDR_7_V << RMT_APB_MEM_RADDR_7_S)
|
|
|
+#define RMT_APB_MEM_RADDR_7_V 0x000003FFU
|
|
|
+#define RMT_APB_MEM_RADDR_7_S 11
|
|
|
+/** RMT_STATE_7 : RO; bitpos: [24:22]; default: 0;
|
|
|
+ * This register records the FSM status of CHANNEL7.
|
|
|
+ */
|
|
|
+#define RMT_STATE_7 0x00000007U
|
|
|
+#define RMT_STATE_7_M (RMT_STATE_7_V << RMT_STATE_7_S)
|
|
|
+#define RMT_STATE_7_V 0x00000007U
|
|
|
+#define RMT_STATE_7_S 22
|
|
|
+/** RMT_MEM_OWNER_ERR_7 : RO; bitpos: [25]; default: 0;
|
|
|
+ * This status bit will be set when the ownership of memory block is wrong.
|
|
|
+ */
|
|
|
+#define RMT_MEM_OWNER_ERR_7 (BIT(25))
|
|
|
+#define RMT_MEM_OWNER_ERR_7_M (RMT_MEM_OWNER_ERR_7_V << RMT_MEM_OWNER_ERR_7_S)
|
|
|
+#define RMT_MEM_OWNER_ERR_7_V 0x00000001U
|
|
|
+#define RMT_MEM_OWNER_ERR_7_S 25
|
|
|
+/** RMT_MEM_FULL_7 : RO; bitpos: [26]; default: 0;
|
|
|
+ * This status bit will be set if the receiver receives more data than the memory size.
|
|
|
+ */
|
|
|
+#define RMT_MEM_FULL_7 (BIT(26))
|
|
|
+#define RMT_MEM_FULL_7_M (RMT_MEM_FULL_7_V << RMT_MEM_FULL_7_S)
|
|
|
+#define RMT_MEM_FULL_7_V 0x00000001U
|
|
|
+#define RMT_MEM_FULL_7_S 26
|
|
|
+/** RMT_APB_MEM_RD_ERR_7 : RO; bitpos: [27]; default: 0;
|
|
|
+ * This status bit will be set if the offset address out of memory size when reads via
|
|
|
+ * APB bus.
|
|
|
+ */
|
|
|
+#define RMT_APB_MEM_RD_ERR_7 (BIT(27))
|
|
|
+#define RMT_APB_MEM_RD_ERR_7_M (RMT_APB_MEM_RD_ERR_7_V << RMT_APB_MEM_RD_ERR_7_S)
|
|
|
+#define RMT_APB_MEM_RD_ERR_7_V 0x00000001U
|
|
|
+#define RMT_APB_MEM_RD_ERR_7_S 27
|
|
|
|
|
|
-#define RMT_INT_RAW_REG (DR_REG_RMT_BASE + 0x70)
|
|
|
-/* RMT_CH7_DMA_ACCESS_FAIL_INT_RAW : R/WTC/SS ;bitpos:[29] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$m. Triggered when dma accessing CHANNEL$m fail
|
|
|
-s..*/
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_RAW (BIT(29))
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_RAW_M (BIT(29))
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_RAW_V 0x1
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_RAW_S 29
|
|
|
-/* RMT_CH3_DMA_ACCESS_FAIL_INT_RAW : R/WTC/SS ;bitpos:[28] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when dma accessing CHANNEL$n fail
|
|
|
-s..*/
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_RAW (BIT(28))
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_RAW_M (BIT(28))
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_RAW_V 0x1
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_RAW_S 28
|
|
|
-/* RMT_CH7_RX_THR_EVENT_INT_RAW : R/WTC/SS ;bitpos:[27] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$m. Triggered when receiver receive more data t
|
|
|
-han configured value..*/
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_RAW (BIT(27))
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_RAW_M (BIT(27))
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_RAW_V 0x1
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_RAW_S 27
|
|
|
-/* RMT_CH6_RX_THR_EVENT_INT_RAW : R/WTC/SS ;bitpos:[26] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$m. Triggered when receiver receive more data t
|
|
|
-han configured value..*/
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_RAW (BIT(26))
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_RAW_M (BIT(26))
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_RAW_V 0x1
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_RAW_S 26
|
|
|
-/* RMT_CH5_RX_THR_EVENT_INT_RAW : R/WTC/SS ;bitpos:[25] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$m. Triggered when receiver receive more data t
|
|
|
-han configured value..*/
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_RAW (BIT(25))
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_RAW_M (BIT(25))
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_RAW_V 0x1
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_RAW_S 25
|
|
|
-/* RMT_CH4_RX_THR_EVENT_INT_RAW : R/WTC/SS ;bitpos:[24] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$m. Triggered when receiver receive more data t
|
|
|
-han configured value..*/
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_RAW (BIT(24))
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_RAW_M (BIT(24))
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_RAW_V 0x1
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_RAW_S 24
|
|
|
-/* RMT_CH7_ERR_INT_RAW : R/WTC/SS ;bitpos:[23] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$m. Triggered when error occurs..*/
|
|
|
-#define RMT_CH7_ERR_INT_RAW (BIT(23))
|
|
|
-#define RMT_CH7_ERR_INT_RAW_M (BIT(23))
|
|
|
-#define RMT_CH7_ERR_INT_RAW_V 0x1
|
|
|
-#define RMT_CH7_ERR_INT_RAW_S 23
|
|
|
-/* RMT_CH6_ERR_INT_RAW : R/WTC/SS ;bitpos:[22] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$m. Triggered when error occurs..*/
|
|
|
-#define RMT_CH6_ERR_INT_RAW (BIT(22))
|
|
|
-#define RMT_CH6_ERR_INT_RAW_M (BIT(22))
|
|
|
-#define RMT_CH6_ERR_INT_RAW_V 0x1
|
|
|
-#define RMT_CH6_ERR_INT_RAW_S 22
|
|
|
-/* RMT_CH5_ERR_INT_RAW : R/WTC/SS ;bitpos:[21] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$m. Triggered when error occurs..*/
|
|
|
-#define RMT_CH5_ERR_INT_RAW (BIT(21))
|
|
|
-#define RMT_CH5_ERR_INT_RAW_M (BIT(21))
|
|
|
-#define RMT_CH5_ERR_INT_RAW_V 0x1
|
|
|
-#define RMT_CH5_ERR_INT_RAW_S 21
|
|
|
-/* RMT_CH4_ERR_INT_RAW : R/WTC/SS ;bitpos:[20] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$m. Triggered when error occurs..*/
|
|
|
-#define RMT_CH4_ERR_INT_RAW (BIT(20))
|
|
|
-#define RMT_CH4_ERR_INT_RAW_M (BIT(20))
|
|
|
-#define RMT_CH4_ERR_INT_RAW_V 0x1
|
|
|
-#define RMT_CH4_ERR_INT_RAW_S 20
|
|
|
-/* RMT_CH7_RX_END_INT_RAW : R/WTC/SS ;bitpos:[19] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$m. Triggered when reception done..*/
|
|
|
-#define RMT_CH7_RX_END_INT_RAW (BIT(19))
|
|
|
-#define RMT_CH7_RX_END_INT_RAW_M (BIT(19))
|
|
|
-#define RMT_CH7_RX_END_INT_RAW_V 0x1
|
|
|
-#define RMT_CH7_RX_END_INT_RAW_S 19
|
|
|
-/* RMT_CH6_RX_END_INT_RAW : R/WTC/SS ;bitpos:[18] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$m. Triggered when reception done..*/
|
|
|
-#define RMT_CH6_RX_END_INT_RAW (BIT(18))
|
|
|
-#define RMT_CH6_RX_END_INT_RAW_M (BIT(18))
|
|
|
-#define RMT_CH6_RX_END_INT_RAW_V 0x1
|
|
|
-#define RMT_CH6_RX_END_INT_RAW_S 18
|
|
|
-/* RMT_CH5_RX_END_INT_RAW : R/WTC/SS ;bitpos:[17] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$m. Triggered when reception done..*/
|
|
|
-#define RMT_CH5_RX_END_INT_RAW (BIT(17))
|
|
|
-#define RMT_CH5_RX_END_INT_RAW_M (BIT(17))
|
|
|
-#define RMT_CH5_RX_END_INT_RAW_V 0x1
|
|
|
-#define RMT_CH5_RX_END_INT_RAW_S 17
|
|
|
-/* RMT_CH4_RX_END_INT_RAW : R/WTC/SS ;bitpos:[16] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$m. Triggered when reception done..*/
|
|
|
-#define RMT_CH4_RX_END_INT_RAW (BIT(16))
|
|
|
-#define RMT_CH4_RX_END_INT_RAW_M (BIT(16))
|
|
|
-#define RMT_CH4_RX_END_INT_RAW_V 0x1
|
|
|
-#define RMT_CH4_RX_END_INT_RAW_S 16
|
|
|
-/* RMT_CH3_TX_LOOP_INT_RAW : R/WTC/SS ;bitpos:[15] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when the loop count reaches the c
|
|
|
-onfigured threshold value..*/
|
|
|
-#define RMT_CH3_TX_LOOP_INT_RAW (BIT(15))
|
|
|
-#define RMT_CH3_TX_LOOP_INT_RAW_M (BIT(15))
|
|
|
-#define RMT_CH3_TX_LOOP_INT_RAW_V 0x1
|
|
|
-#define RMT_CH3_TX_LOOP_INT_RAW_S 15
|
|
|
-/* RMT_CH2_TX_LOOP_INT_RAW : R/WTC/SS ;bitpos:[14] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when the loop count reaches the c
|
|
|
-onfigured threshold value..*/
|
|
|
-#define RMT_CH2_TX_LOOP_INT_RAW (BIT(14))
|
|
|
-#define RMT_CH2_TX_LOOP_INT_RAW_M (BIT(14))
|
|
|
-#define RMT_CH2_TX_LOOP_INT_RAW_V 0x1
|
|
|
-#define RMT_CH2_TX_LOOP_INT_RAW_S 14
|
|
|
-/* RMT_CH1_TX_LOOP_INT_RAW : R/WTC/SS ;bitpos:[13] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when the loop count reaches the c
|
|
|
-onfigured threshold value..*/
|
|
|
-#define RMT_CH1_TX_LOOP_INT_RAW (BIT(13))
|
|
|
-#define RMT_CH1_TX_LOOP_INT_RAW_M (BIT(13))
|
|
|
-#define RMT_CH1_TX_LOOP_INT_RAW_V 0x1
|
|
|
-#define RMT_CH1_TX_LOOP_INT_RAW_S 13
|
|
|
-/* RMT_CH0_TX_LOOP_INT_RAW : R/WTC/SS ;bitpos:[12] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when the loop count reaches the c
|
|
|
-onfigured threshold value..*/
|
|
|
-#define RMT_CH0_TX_LOOP_INT_RAW (BIT(12))
|
|
|
-#define RMT_CH0_TX_LOOP_INT_RAW_M (BIT(12))
|
|
|
-#define RMT_CH0_TX_LOOP_INT_RAW_V 0x1
|
|
|
-#define RMT_CH0_TX_LOOP_INT_RAW_S 12
|
|
|
-/* RMT_CH3_TX_THR_EVENT_INT_RAW : R/WTC/SS ;bitpos:[11] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when transmitter sent more data t
|
|
|
-han configured value..*/
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_RAW (BIT(11))
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_RAW_M (BIT(11))
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_RAW_V 0x1
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_RAW_S 11
|
|
|
-/* RMT_CH2_TX_THR_EVENT_INT_RAW : R/WTC/SS ;bitpos:[10] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when transmitter sent more data t
|
|
|
-han configured value..*/
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_RAW (BIT(10))
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_RAW_M (BIT(10))
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_RAW_V 0x1
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_RAW_S 10
|
|
|
-/* RMT_CH1_TX_THR_EVENT_INT_RAW : R/WTC/SS ;bitpos:[9] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when transmitter sent more data t
|
|
|
-han configured value..*/
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_RAW (BIT(9))
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_RAW_M (BIT(9))
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_RAW_V 0x1
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_RAW_S 9
|
|
|
-/* RMT_CH0_TX_THR_EVENT_INT_RAW : R/WTC/SS ;bitpos:[8] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when transmitter sent more data t
|
|
|
-han configured value..*/
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_RAW (BIT(8))
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_RAW_M (BIT(8))
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_RAW_V 0x1
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_RAW_S 8
|
|
|
-/* RMT_CH3_ERR_INT_RAW : R/WTC/SS ;bitpos:[7] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when error occurs..*/
|
|
|
-#define RMT_CH3_ERR_INT_RAW (BIT(7))
|
|
|
-#define RMT_CH3_ERR_INT_RAW_M (BIT(7))
|
|
|
-#define RMT_CH3_ERR_INT_RAW_V 0x1
|
|
|
-#define RMT_CH3_ERR_INT_RAW_S 7
|
|
|
-/* RMT_CH2_ERR_INT_RAW : R/WTC/SS ;bitpos:[6] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when error occurs..*/
|
|
|
-#define RMT_CH2_ERR_INT_RAW (BIT(6))
|
|
|
-#define RMT_CH2_ERR_INT_RAW_M (BIT(6))
|
|
|
-#define RMT_CH2_ERR_INT_RAW_V 0x1
|
|
|
-#define RMT_CH2_ERR_INT_RAW_S 6
|
|
|
-/* RMT_CH1_ERR_INT_RAW : R/WTC/SS ;bitpos:[5] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when error occurs..*/
|
|
|
-#define RMT_CH1_ERR_INT_RAW (BIT(5))
|
|
|
-#define RMT_CH1_ERR_INT_RAW_M (BIT(5))
|
|
|
-#define RMT_CH1_ERR_INT_RAW_V 0x1
|
|
|
-#define RMT_CH1_ERR_INT_RAW_S 5
|
|
|
-/* RMT_CH0_ERR_INT_RAW : R/WTC/SS ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when error occurs..*/
|
|
|
-#define RMT_CH0_ERR_INT_RAW (BIT(4))
|
|
|
-#define RMT_CH0_ERR_INT_RAW_M (BIT(4))
|
|
|
-#define RMT_CH0_ERR_INT_RAW_V 0x1
|
|
|
-#define RMT_CH0_ERR_INT_RAW_S 4
|
|
|
-/* RMT_CH3_TX_END_INT_RAW : R/WTC/SS ;bitpos:[3] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when transmission done..*/
|
|
|
-#define RMT_CH3_TX_END_INT_RAW (BIT(3))
|
|
|
-#define RMT_CH3_TX_END_INT_RAW_M (BIT(3))
|
|
|
-#define RMT_CH3_TX_END_INT_RAW_V 0x1
|
|
|
-#define RMT_CH3_TX_END_INT_RAW_S 3
|
|
|
-/* RMT_CH2_TX_END_INT_RAW : R/WTC/SS ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when transmission done..*/
|
|
|
-#define RMT_CH2_TX_END_INT_RAW (BIT(2))
|
|
|
-#define RMT_CH2_TX_END_INT_RAW_M (BIT(2))
|
|
|
-#define RMT_CH2_TX_END_INT_RAW_V 0x1
|
|
|
-#define RMT_CH2_TX_END_INT_RAW_S 2
|
|
|
-/* RMT_CH1_TX_END_INT_RAW : R/WTC/SS ;bitpos:[1] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when transmission done..*/
|
|
|
-#define RMT_CH1_TX_END_INT_RAW (BIT(1))
|
|
|
-#define RMT_CH1_TX_END_INT_RAW_M (BIT(1))
|
|
|
-#define RMT_CH1_TX_END_INT_RAW_V 0x1
|
|
|
-#define RMT_CH1_TX_END_INT_RAW_S 1
|
|
|
-/* RMT_CH0_TX_END_INT_RAW : R/WTC/SS ;bitpos:[0] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt raw bit for CHANNEL$n. Triggered when transmission done..*/
|
|
|
+/** RMT_INT_RAW_REG register
|
|
|
+ * Raw interrupt status
|
|
|
+ */
|
|
|
+#define RMT_INT_RAW_REG (DR_REG_RMT_BASE + 0x70)
|
|
|
+/** RMT_CH0_TX_END_INT_RAW : R/WTC/SS; bitpos: [0]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL0. Triggered when transmission done.
|
|
|
+ */
|
|
|
#define RMT_CH0_TX_END_INT_RAW (BIT(0))
|
|
|
-#define RMT_CH0_TX_END_INT_RAW_M (BIT(0))
|
|
|
-#define RMT_CH0_TX_END_INT_RAW_V 0x1
|
|
|
+#define RMT_CH0_TX_END_INT_RAW_M (RMT_CH0_TX_END_INT_RAW_V << RMT_CH0_TX_END_INT_RAW_S)
|
|
|
+#define RMT_CH0_TX_END_INT_RAW_V 0x00000001U
|
|
|
#define RMT_CH0_TX_END_INT_RAW_S 0
|
|
|
+/** RMT_CH1_TX_END_INT_RAW : R/WTC/SS; bitpos: [1]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL1. Triggered when transmission done.
|
|
|
+ */
|
|
|
+#define RMT_CH1_TX_END_INT_RAW (BIT(1))
|
|
|
+#define RMT_CH1_TX_END_INT_RAW_M (RMT_CH1_TX_END_INT_RAW_V << RMT_CH1_TX_END_INT_RAW_S)
|
|
|
+#define RMT_CH1_TX_END_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH1_TX_END_INT_RAW_S 1
|
|
|
+/** RMT_CH2_TX_END_INT_RAW : R/WTC/SS; bitpos: [2]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL2. Triggered when transmission done.
|
|
|
+ */
|
|
|
+#define RMT_CH2_TX_END_INT_RAW (BIT(2))
|
|
|
+#define RMT_CH2_TX_END_INT_RAW_M (RMT_CH2_TX_END_INT_RAW_V << RMT_CH2_TX_END_INT_RAW_S)
|
|
|
+#define RMT_CH2_TX_END_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH2_TX_END_INT_RAW_S 2
|
|
|
+/** RMT_CH3_TX_END_INT_RAW : R/WTC/SS; bitpos: [3]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL3. Triggered when transmission done.
|
|
|
+ */
|
|
|
+#define RMT_CH3_TX_END_INT_RAW (BIT(3))
|
|
|
+#define RMT_CH3_TX_END_INT_RAW_M (RMT_CH3_TX_END_INT_RAW_V << RMT_CH3_TX_END_INT_RAW_S)
|
|
|
+#define RMT_CH3_TX_END_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH3_TX_END_INT_RAW_S 3
|
|
|
+/** RMT_CH0_ERR_INT_RAW : R/WTC/SS; bitpos: [4]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL0. Triggered when error occurs.
|
|
|
+ */
|
|
|
+#define RMT_CH0_ERR_INT_RAW (BIT(4))
|
|
|
+#define RMT_CH0_ERR_INT_RAW_M (RMT_CH0_ERR_INT_RAW_V << RMT_CH0_ERR_INT_RAW_S)
|
|
|
+#define RMT_CH0_ERR_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH0_ERR_INT_RAW_S 4
|
|
|
+/** RMT_CH1_ERR_INT_RAW : R/WTC/SS; bitpos: [5]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL1. Triggered when error occurs.
|
|
|
+ */
|
|
|
+#define RMT_CH1_ERR_INT_RAW (BIT(5))
|
|
|
+#define RMT_CH1_ERR_INT_RAW_M (RMT_CH1_ERR_INT_RAW_V << RMT_CH1_ERR_INT_RAW_S)
|
|
|
+#define RMT_CH1_ERR_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH1_ERR_INT_RAW_S 5
|
|
|
+/** RMT_CH2_ERR_INT_RAW : R/WTC/SS; bitpos: [6]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL2. Triggered when error occurs.
|
|
|
+ */
|
|
|
+#define RMT_CH2_ERR_INT_RAW (BIT(6))
|
|
|
+#define RMT_CH2_ERR_INT_RAW_M (RMT_CH2_ERR_INT_RAW_V << RMT_CH2_ERR_INT_RAW_S)
|
|
|
+#define RMT_CH2_ERR_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH2_ERR_INT_RAW_S 6
|
|
|
+/** RMT_CH3_ERR_INT_RAW : R/WTC/SS; bitpos: [7]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL3. Triggered when error occurs.
|
|
|
+ */
|
|
|
+#define RMT_CH3_ERR_INT_RAW (BIT(7))
|
|
|
+#define RMT_CH3_ERR_INT_RAW_M (RMT_CH3_ERR_INT_RAW_V << RMT_CH3_ERR_INT_RAW_S)
|
|
|
+#define RMT_CH3_ERR_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH3_ERR_INT_RAW_S 7
|
|
|
+/** RMT_CH0_TX_THR_EVENT_INT_RAW : R/WTC/SS; bitpos: [8]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL0. Triggered when transmitter sent more data than
|
|
|
+ * configured value.
|
|
|
+ */
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_RAW (BIT(8))
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_RAW_M (RMT_CH0_TX_THR_EVENT_INT_RAW_V << RMT_CH0_TX_THR_EVENT_INT_RAW_S)
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_RAW_S 8
|
|
|
+/** RMT_CH1_TX_THR_EVENT_INT_RAW : R/WTC/SS; bitpos: [9]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL1. Triggered when transmitter sent more data than
|
|
|
+ * configured value.
|
|
|
+ */
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_RAW (BIT(9))
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_RAW_M (RMT_CH1_TX_THR_EVENT_INT_RAW_V << RMT_CH1_TX_THR_EVENT_INT_RAW_S)
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_RAW_S 9
|
|
|
+/** RMT_CH2_TX_THR_EVENT_INT_RAW : R/WTC/SS; bitpos: [10]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL2. Triggered when transmitter sent more data than
|
|
|
+ * configured value.
|
|
|
+ */
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_RAW (BIT(10))
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_RAW_M (RMT_CH2_TX_THR_EVENT_INT_RAW_V << RMT_CH2_TX_THR_EVENT_INT_RAW_S)
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_RAW_S 10
|
|
|
+/** RMT_CH3_TX_THR_EVENT_INT_RAW : R/WTC/SS; bitpos: [11]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL3. Triggered when transmitter sent more data than
|
|
|
+ * configured value.
|
|
|
+ */
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_RAW (BIT(11))
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_RAW_M (RMT_CH3_TX_THR_EVENT_INT_RAW_V << RMT_CH3_TX_THR_EVENT_INT_RAW_S)
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_RAW_S 11
|
|
|
+/** RMT_CH0_TX_LOOP_INT_RAW : R/WTC/SS; bitpos: [12]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL0. Triggered when the loop count reaches the
|
|
|
+ * configured threshold value.
|
|
|
+ */
|
|
|
+#define RMT_CH0_TX_LOOP_INT_RAW (BIT(12))
|
|
|
+#define RMT_CH0_TX_LOOP_INT_RAW_M (RMT_CH0_TX_LOOP_INT_RAW_V << RMT_CH0_TX_LOOP_INT_RAW_S)
|
|
|
+#define RMT_CH0_TX_LOOP_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH0_TX_LOOP_INT_RAW_S 12
|
|
|
+/** RMT_CH1_TX_LOOP_INT_RAW : R/WTC/SS; bitpos: [13]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL1. Triggered when the loop count reaches the
|
|
|
+ * configured threshold value.
|
|
|
+ */
|
|
|
+#define RMT_CH1_TX_LOOP_INT_RAW (BIT(13))
|
|
|
+#define RMT_CH1_TX_LOOP_INT_RAW_M (RMT_CH1_TX_LOOP_INT_RAW_V << RMT_CH1_TX_LOOP_INT_RAW_S)
|
|
|
+#define RMT_CH1_TX_LOOP_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH1_TX_LOOP_INT_RAW_S 13
|
|
|
+/** RMT_CH2_TX_LOOP_INT_RAW : R/WTC/SS; bitpos: [14]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL2. Triggered when the loop count reaches the
|
|
|
+ * configured threshold value.
|
|
|
+ */
|
|
|
+#define RMT_CH2_TX_LOOP_INT_RAW (BIT(14))
|
|
|
+#define RMT_CH2_TX_LOOP_INT_RAW_M (RMT_CH2_TX_LOOP_INT_RAW_V << RMT_CH2_TX_LOOP_INT_RAW_S)
|
|
|
+#define RMT_CH2_TX_LOOP_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH2_TX_LOOP_INT_RAW_S 14
|
|
|
+/** RMT_CH3_TX_LOOP_INT_RAW : R/WTC/SS; bitpos: [15]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL3. Triggered when the loop count reaches the
|
|
|
+ * configured threshold value.
|
|
|
+ */
|
|
|
+#define RMT_CH3_TX_LOOP_INT_RAW (BIT(15))
|
|
|
+#define RMT_CH3_TX_LOOP_INT_RAW_M (RMT_CH3_TX_LOOP_INT_RAW_V << RMT_CH3_TX_LOOP_INT_RAW_S)
|
|
|
+#define RMT_CH3_TX_LOOP_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH3_TX_LOOP_INT_RAW_S 15
|
|
|
+/** RMT_CH4_RX_END_INT_RAW : R/WTC/SS; bitpos: [16]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL4. Triggered when reception done.
|
|
|
+ */
|
|
|
+#define RMT_CH4_RX_END_INT_RAW (BIT(16))
|
|
|
+#define RMT_CH4_RX_END_INT_RAW_M (RMT_CH4_RX_END_INT_RAW_V << RMT_CH4_RX_END_INT_RAW_S)
|
|
|
+#define RMT_CH4_RX_END_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH4_RX_END_INT_RAW_S 16
|
|
|
+/** RMT_CH5_RX_END_INT_RAW : R/WTC/SS; bitpos: [17]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL5. Triggered when reception done.
|
|
|
+ */
|
|
|
+#define RMT_CH5_RX_END_INT_RAW (BIT(17))
|
|
|
+#define RMT_CH5_RX_END_INT_RAW_M (RMT_CH5_RX_END_INT_RAW_V << RMT_CH5_RX_END_INT_RAW_S)
|
|
|
+#define RMT_CH5_RX_END_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH5_RX_END_INT_RAW_S 17
|
|
|
+/** RMT_CH6_RX_END_INT_RAW : R/WTC/SS; bitpos: [18]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL6. Triggered when reception done.
|
|
|
+ */
|
|
|
+#define RMT_CH6_RX_END_INT_RAW (BIT(18))
|
|
|
+#define RMT_CH6_RX_END_INT_RAW_M (RMT_CH6_RX_END_INT_RAW_V << RMT_CH6_RX_END_INT_RAW_S)
|
|
|
+#define RMT_CH6_RX_END_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH6_RX_END_INT_RAW_S 18
|
|
|
+/** RMT_CH7_RX_END_INT_RAW : R/WTC/SS; bitpos: [19]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL7. Triggered when reception done.
|
|
|
+ */
|
|
|
+#define RMT_CH7_RX_END_INT_RAW (BIT(19))
|
|
|
+#define RMT_CH7_RX_END_INT_RAW_M (RMT_CH7_RX_END_INT_RAW_V << RMT_CH7_RX_END_INT_RAW_S)
|
|
|
+#define RMT_CH7_RX_END_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH7_RX_END_INT_RAW_S 19
|
|
|
+/** RMT_CH4_ERR_INT_RAW : R/WTC/SS; bitpos: [20]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL4. Triggered when error occurs.
|
|
|
+ */
|
|
|
+#define RMT_CH4_ERR_INT_RAW (BIT(20))
|
|
|
+#define RMT_CH4_ERR_INT_RAW_M (RMT_CH4_ERR_INT_RAW_V << RMT_CH4_ERR_INT_RAW_S)
|
|
|
+#define RMT_CH4_ERR_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH4_ERR_INT_RAW_S 20
|
|
|
+/** RMT_CH5_ERR_INT_RAW : R/WTC/SS; bitpos: [21]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL5. Triggered when error occurs.
|
|
|
+ */
|
|
|
+#define RMT_CH5_ERR_INT_RAW (BIT(21))
|
|
|
+#define RMT_CH5_ERR_INT_RAW_M (RMT_CH5_ERR_INT_RAW_V << RMT_CH5_ERR_INT_RAW_S)
|
|
|
+#define RMT_CH5_ERR_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH5_ERR_INT_RAW_S 21
|
|
|
+/** RMT_CH6_ERR_INT_RAW : R/WTC/SS; bitpos: [22]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL6. Triggered when error occurs.
|
|
|
+ */
|
|
|
+#define RMT_CH6_ERR_INT_RAW (BIT(22))
|
|
|
+#define RMT_CH6_ERR_INT_RAW_M (RMT_CH6_ERR_INT_RAW_V << RMT_CH6_ERR_INT_RAW_S)
|
|
|
+#define RMT_CH6_ERR_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH6_ERR_INT_RAW_S 22
|
|
|
+/** RMT_CH7_ERR_INT_RAW : R/WTC/SS; bitpos: [23]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL7. Triggered when error occurs.
|
|
|
+ */
|
|
|
+#define RMT_CH7_ERR_INT_RAW (BIT(23))
|
|
|
+#define RMT_CH7_ERR_INT_RAW_M (RMT_CH7_ERR_INT_RAW_V << RMT_CH7_ERR_INT_RAW_S)
|
|
|
+#define RMT_CH7_ERR_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH7_ERR_INT_RAW_S 23
|
|
|
+/** RMT_CH4_RX_THR_EVENT_INT_RAW : R/WTC/SS; bitpos: [24]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL4. Triggered when receiver receive more data than
|
|
|
+ * configured value.
|
|
|
+ */
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_RAW (BIT(24))
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_RAW_M (RMT_CH4_RX_THR_EVENT_INT_RAW_V << RMT_CH4_RX_THR_EVENT_INT_RAW_S)
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_RAW_S 24
|
|
|
+/** RMT_CH5_RX_THR_EVENT_INT_RAW : R/WTC/SS; bitpos: [25]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL5. Triggered when receiver receive more data than
|
|
|
+ * configured value.
|
|
|
+ */
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_RAW (BIT(25))
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_RAW_M (RMT_CH5_RX_THR_EVENT_INT_RAW_V << RMT_CH5_RX_THR_EVENT_INT_RAW_S)
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_RAW_S 25
|
|
|
+/** RMT_CH6_RX_THR_EVENT_INT_RAW : R/WTC/SS; bitpos: [26]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL6. Triggered when receiver receive more data than
|
|
|
+ * configured value.
|
|
|
+ */
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_RAW (BIT(26))
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_RAW_M (RMT_CH6_RX_THR_EVENT_INT_RAW_V << RMT_CH6_RX_THR_EVENT_INT_RAW_S)
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_RAW_S 26
|
|
|
+/** RMT_CH7_RX_THR_EVENT_INT_RAW : R/WTC/SS; bitpos: [27]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL7. Triggered when receiver receive more data than
|
|
|
+ * configured value.
|
|
|
+ */
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_RAW (BIT(27))
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_RAW_M (RMT_CH7_RX_THR_EVENT_INT_RAW_V << RMT_CH7_RX_THR_EVENT_INT_RAW_S)
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_RAW_S 27
|
|
|
+/** RMT_CH3_DMA_ACCESS_FAIL_INT_RAW : R/WTC/SS; bitpos: [28]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL3. Triggered when dma accessing CHANNEL3 fails.
|
|
|
+ */
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_RAW (BIT(28))
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_RAW_M (RMT_CH3_DMA_ACCESS_FAIL_INT_RAW_V << RMT_CH3_DMA_ACCESS_FAIL_INT_RAW_S)
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_RAW_S 28
|
|
|
+/** RMT_CH7_DMA_ACCESS_FAIL_INT_RAW : R/WTC/SS; bitpos: [29]; default: 0;
|
|
|
+ * The interrupt raw bit for CHANNEL7. Triggered when dma accessing CHANNEL7 fails.
|
|
|
+ */
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_RAW (BIT(29))
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_RAW_M (RMT_CH7_DMA_ACCESS_FAIL_INT_RAW_V << RMT_CH7_DMA_ACCESS_FAIL_INT_RAW_S)
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_RAW_V 0x00000001U
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_RAW_S 29
|
|
|
|
|
|
-#define RMT_INT_ST_REG (DR_REG_RMT_BASE + 0x74)
|
|
|
-/* RMT_CH7_DMA_ACCESS_FAIL_INT_ST : RO ;bitpos:[29] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$m_DMA_ACCESS_FAIL_INT..*/
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_ST (BIT(29))
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_ST_M (BIT(29))
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_ST_V 0x1
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_ST_S 29
|
|
|
-/* RMT_CH3_DMA_ACCESS_FAIL_INT_ST : RO ;bitpos:[28] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_DMA_ACCESS_FAIL_INT..*/
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_ST (BIT(28))
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_ST_M (BIT(28))
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_ST_V 0x1
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_ST_S 28
|
|
|
-/* RMT_CH7_RX_THR_EVENT_INT_ST : RO ;bitpos:[27] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$m_RX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_ST (BIT(27))
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_ST_M (BIT(27))
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_ST_V 0x1
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_ST_S 27
|
|
|
-/* RMT_CH6_RX_THR_EVENT_INT_ST : RO ;bitpos:[26] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$m_RX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_ST (BIT(26))
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_ST_M (BIT(26))
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_ST_V 0x1
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_ST_S 26
|
|
|
-/* RMT_CH5_RX_THR_EVENT_INT_ST : RO ;bitpos:[25] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$m_RX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_ST (BIT(25))
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_ST_M (BIT(25))
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_ST_V 0x1
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_ST_S 25
|
|
|
-/* RMT_CH4_RX_THR_EVENT_INT_ST : RO ;bitpos:[24] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$m_RX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_ST (BIT(24))
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_ST_M (BIT(24))
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_ST_V 0x1
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_ST_S 24
|
|
|
-/* RMT_CH7_ERR_INT_ST : RO ;bitpos:[23] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$m_ERR_INT..*/
|
|
|
-#define RMT_CH7_ERR_INT_ST (BIT(23))
|
|
|
-#define RMT_CH7_ERR_INT_ST_M (BIT(23))
|
|
|
-#define RMT_CH7_ERR_INT_ST_V 0x1
|
|
|
-#define RMT_CH7_ERR_INT_ST_S 23
|
|
|
-/* RMT_CH6_ERR_INT_ST : RO ;bitpos:[22] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$m_ERR_INT..*/
|
|
|
-#define RMT_CH6_ERR_INT_ST (BIT(22))
|
|
|
-#define RMT_CH6_ERR_INT_ST_M (BIT(22))
|
|
|
-#define RMT_CH6_ERR_INT_ST_V 0x1
|
|
|
-#define RMT_CH6_ERR_INT_ST_S 22
|
|
|
-/* RMT_CH5_ERR_INT_ST : RO ;bitpos:[21] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$m_ERR_INT..*/
|
|
|
-#define RMT_CH5_ERR_INT_ST (BIT(21))
|
|
|
-#define RMT_CH5_ERR_INT_ST_M (BIT(21))
|
|
|
-#define RMT_CH5_ERR_INT_ST_V 0x1
|
|
|
-#define RMT_CH5_ERR_INT_ST_S 21
|
|
|
-/* RMT_CH4_ERR_INT_ST : RO ;bitpos:[20] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$m_ERR_INT..*/
|
|
|
-#define RMT_CH4_ERR_INT_ST (BIT(20))
|
|
|
-#define RMT_CH4_ERR_INT_ST_M (BIT(20))
|
|
|
-#define RMT_CH4_ERR_INT_ST_V 0x1
|
|
|
-#define RMT_CH4_ERR_INT_ST_S 20
|
|
|
-/* RMT_CH7_RX_END_INT_ST : RO ;bitpos:[19] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$m_RX_END_INT..*/
|
|
|
-#define RMT_CH7_RX_END_INT_ST (BIT(19))
|
|
|
-#define RMT_CH7_RX_END_INT_ST_M (BIT(19))
|
|
|
-#define RMT_CH7_RX_END_INT_ST_V 0x1
|
|
|
-#define RMT_CH7_RX_END_INT_ST_S 19
|
|
|
-/* RMT_CH6_RX_END_INT_ST : RO ;bitpos:[18] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$m_RX_END_INT..*/
|
|
|
-#define RMT_CH6_RX_END_INT_ST (BIT(18))
|
|
|
-#define RMT_CH6_RX_END_INT_ST_M (BIT(18))
|
|
|
-#define RMT_CH6_RX_END_INT_ST_V 0x1
|
|
|
-#define RMT_CH6_RX_END_INT_ST_S 18
|
|
|
-/* RMT_CH5_RX_END_INT_ST : RO ;bitpos:[17] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$m_RX_END_INT..*/
|
|
|
-#define RMT_CH5_RX_END_INT_ST (BIT(17))
|
|
|
-#define RMT_CH5_RX_END_INT_ST_M (BIT(17))
|
|
|
-#define RMT_CH5_RX_END_INT_ST_V 0x1
|
|
|
-#define RMT_CH5_RX_END_INT_ST_S 17
|
|
|
-/* RMT_CH4_RX_END_INT_ST : RO ;bitpos:[16] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$m_RX_END_INT..*/
|
|
|
-#define RMT_CH4_RX_END_INT_ST (BIT(16))
|
|
|
-#define RMT_CH4_RX_END_INT_ST_M (BIT(16))
|
|
|
-#define RMT_CH4_RX_END_INT_ST_V 0x1
|
|
|
-#define RMT_CH4_RX_END_INT_ST_S 16
|
|
|
-/* RMT_CH3_TX_LOOP_INT_ST : RO ;bitpos:[15] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_TX_LOOP_INT..*/
|
|
|
-#define RMT_CH3_TX_LOOP_INT_ST (BIT(15))
|
|
|
-#define RMT_CH3_TX_LOOP_INT_ST_M (BIT(15))
|
|
|
-#define RMT_CH3_TX_LOOP_INT_ST_V 0x1
|
|
|
-#define RMT_CH3_TX_LOOP_INT_ST_S 15
|
|
|
-/* RMT_CH2_TX_LOOP_INT_ST : RO ;bitpos:[14] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_TX_LOOP_INT..*/
|
|
|
-#define RMT_CH2_TX_LOOP_INT_ST (BIT(14))
|
|
|
-#define RMT_CH2_TX_LOOP_INT_ST_M (BIT(14))
|
|
|
-#define RMT_CH2_TX_LOOP_INT_ST_V 0x1
|
|
|
-#define RMT_CH2_TX_LOOP_INT_ST_S 14
|
|
|
-/* RMT_CH1_TX_LOOP_INT_ST : RO ;bitpos:[13] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_TX_LOOP_INT..*/
|
|
|
-#define RMT_CH1_TX_LOOP_INT_ST (BIT(13))
|
|
|
-#define RMT_CH1_TX_LOOP_INT_ST_M (BIT(13))
|
|
|
-#define RMT_CH1_TX_LOOP_INT_ST_V 0x1
|
|
|
-#define RMT_CH1_TX_LOOP_INT_ST_S 13
|
|
|
-/* RMT_CH0_TX_LOOP_INT_ST : RO ;bitpos:[12] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_TX_LOOP_INT..*/
|
|
|
-#define RMT_CH0_TX_LOOP_INT_ST (BIT(12))
|
|
|
-#define RMT_CH0_TX_LOOP_INT_ST_M (BIT(12))
|
|
|
-#define RMT_CH0_TX_LOOP_INT_ST_V 0x1
|
|
|
-#define RMT_CH0_TX_LOOP_INT_ST_S 12
|
|
|
-/* RMT_CH3_TX_THR_EVENT_INT_ST : RO ;bitpos:[11] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_TX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_ST (BIT(11))
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_ST_M (BIT(11))
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_ST_V 0x1
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_ST_S 11
|
|
|
-/* RMT_CH2_TX_THR_EVENT_INT_ST : RO ;bitpos:[10] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_TX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_ST (BIT(10))
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_ST_M (BIT(10))
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_ST_V 0x1
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_ST_S 10
|
|
|
-/* RMT_CH1_TX_THR_EVENT_INT_ST : RO ;bitpos:[9] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_TX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_ST (BIT(9))
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_ST_M (BIT(9))
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_ST_V 0x1
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_ST_S 9
|
|
|
-/* RMT_CH0_TX_THR_EVENT_INT_ST : RO ;bitpos:[8] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_TX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_ST (BIT(8))
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_ST_M (BIT(8))
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_ST_V 0x1
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_ST_S 8
|
|
|
-/* RMT_CH3_ERR_INT_ST : RO ;bitpos:[7] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_ERR_INT..*/
|
|
|
-#define RMT_CH3_ERR_INT_ST (BIT(7))
|
|
|
-#define RMT_CH3_ERR_INT_ST_M (BIT(7))
|
|
|
-#define RMT_CH3_ERR_INT_ST_V 0x1
|
|
|
-#define RMT_CH3_ERR_INT_ST_S 7
|
|
|
-/* RMT_CH2_ERR_INT_ST : RO ;bitpos:[6] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_ERR_INT..*/
|
|
|
-#define RMT_CH2_ERR_INT_ST (BIT(6))
|
|
|
-#define RMT_CH2_ERR_INT_ST_M (BIT(6))
|
|
|
-#define RMT_CH2_ERR_INT_ST_V 0x1
|
|
|
-#define RMT_CH2_ERR_INT_ST_S 6
|
|
|
-/* RMT_CH1_ERR_INT_ST : RO ;bitpos:[5] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_ERR_INT..*/
|
|
|
-#define RMT_CH1_ERR_INT_ST (BIT(5))
|
|
|
-#define RMT_CH1_ERR_INT_ST_M (BIT(5))
|
|
|
-#define RMT_CH1_ERR_INT_ST_V 0x1
|
|
|
-#define RMT_CH1_ERR_INT_ST_S 5
|
|
|
-/* RMT_CH0_ERR_INT_ST : RO ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_ERR_INT..*/
|
|
|
-#define RMT_CH0_ERR_INT_ST (BIT(4))
|
|
|
-#define RMT_CH0_ERR_INT_ST_M (BIT(4))
|
|
|
-#define RMT_CH0_ERR_INT_ST_V 0x1
|
|
|
-#define RMT_CH0_ERR_INT_ST_S 4
|
|
|
-/* RMT_CH3_TX_END_INT_ST : RO ;bitpos:[3] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_TX_END_INT..*/
|
|
|
-#define RMT_CH3_TX_END_INT_ST (BIT(3))
|
|
|
-#define RMT_CH3_TX_END_INT_ST_M (BIT(3))
|
|
|
-#define RMT_CH3_TX_END_INT_ST_V 0x1
|
|
|
-#define RMT_CH3_TX_END_INT_ST_S 3
|
|
|
-/* RMT_CH2_TX_END_INT_ST : RO ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_TX_END_INT..*/
|
|
|
-#define RMT_CH2_TX_END_INT_ST (BIT(2))
|
|
|
-#define RMT_CH2_TX_END_INT_ST_M (BIT(2))
|
|
|
-#define RMT_CH2_TX_END_INT_ST_V 0x1
|
|
|
-#define RMT_CH2_TX_END_INT_ST_S 2
|
|
|
-/* RMT_CH1_TX_END_INT_ST : RO ;bitpos:[1] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_TX_END_INT..*/
|
|
|
-#define RMT_CH1_TX_END_INT_ST (BIT(1))
|
|
|
-#define RMT_CH1_TX_END_INT_ST_M (BIT(1))
|
|
|
-#define RMT_CH1_TX_END_INT_ST_V 0x1
|
|
|
-#define RMT_CH1_TX_END_INT_ST_S 1
|
|
|
-/* RMT_CH0_TX_END_INT_ST : RO ;bitpos:[0] ;default: 1'b0 ; */
|
|
|
-/*description: The masked interrupt status bit for CH$n_TX_END_INT..*/
|
|
|
+/** RMT_INT_ST_REG register
|
|
|
+ * Masked interrupt status
|
|
|
+ */
|
|
|
+#define RMT_INT_ST_REG (DR_REG_RMT_BASE + 0x74)
|
|
|
+/** RMT_CH0_TX_END_INT_ST : RO; bitpos: [0]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH0_TX_END_INT.
|
|
|
+ */
|
|
|
#define RMT_CH0_TX_END_INT_ST (BIT(0))
|
|
|
-#define RMT_CH0_TX_END_INT_ST_M (BIT(0))
|
|
|
-#define RMT_CH0_TX_END_INT_ST_V 0x1
|
|
|
+#define RMT_CH0_TX_END_INT_ST_M (RMT_CH0_TX_END_INT_ST_V << RMT_CH0_TX_END_INT_ST_S)
|
|
|
+#define RMT_CH0_TX_END_INT_ST_V 0x00000001U
|
|
|
#define RMT_CH0_TX_END_INT_ST_S 0
|
|
|
+/** RMT_CH1_TX_END_INT_ST : RO; bitpos: [1]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH1_TX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH1_TX_END_INT_ST (BIT(1))
|
|
|
+#define RMT_CH1_TX_END_INT_ST_M (RMT_CH1_TX_END_INT_ST_V << RMT_CH1_TX_END_INT_ST_S)
|
|
|
+#define RMT_CH1_TX_END_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH1_TX_END_INT_ST_S 1
|
|
|
+/** RMT_CH2_TX_END_INT_ST : RO; bitpos: [2]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH2_TX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH2_TX_END_INT_ST (BIT(2))
|
|
|
+#define RMT_CH2_TX_END_INT_ST_M (RMT_CH2_TX_END_INT_ST_V << RMT_CH2_TX_END_INT_ST_S)
|
|
|
+#define RMT_CH2_TX_END_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH2_TX_END_INT_ST_S 2
|
|
|
+/** RMT_CH3_TX_END_INT_ST : RO; bitpos: [3]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH3_TX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH3_TX_END_INT_ST (BIT(3))
|
|
|
+#define RMT_CH3_TX_END_INT_ST_M (RMT_CH3_TX_END_INT_ST_V << RMT_CH3_TX_END_INT_ST_S)
|
|
|
+#define RMT_CH3_TX_END_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH3_TX_END_INT_ST_S 3
|
|
|
+/** RMT_CH0_ERR_INT_ST : RO; bitpos: [4]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH0_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH0_ERR_INT_ST (BIT(4))
|
|
|
+#define RMT_CH0_ERR_INT_ST_M (RMT_CH0_ERR_INT_ST_V << RMT_CH0_ERR_INT_ST_S)
|
|
|
+#define RMT_CH0_ERR_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH0_ERR_INT_ST_S 4
|
|
|
+/** RMT_CH1_ERR_INT_ST : RO; bitpos: [5]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH1_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH1_ERR_INT_ST (BIT(5))
|
|
|
+#define RMT_CH1_ERR_INT_ST_M (RMT_CH1_ERR_INT_ST_V << RMT_CH1_ERR_INT_ST_S)
|
|
|
+#define RMT_CH1_ERR_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH1_ERR_INT_ST_S 5
|
|
|
+/** RMT_CH2_ERR_INT_ST : RO; bitpos: [6]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH2_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH2_ERR_INT_ST (BIT(6))
|
|
|
+#define RMT_CH2_ERR_INT_ST_M (RMT_CH2_ERR_INT_ST_V << RMT_CH2_ERR_INT_ST_S)
|
|
|
+#define RMT_CH2_ERR_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH2_ERR_INT_ST_S 6
|
|
|
+/** RMT_CH3_ERR_INT_ST : RO; bitpos: [7]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH3_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH3_ERR_INT_ST (BIT(7))
|
|
|
+#define RMT_CH3_ERR_INT_ST_M (RMT_CH3_ERR_INT_ST_V << RMT_CH3_ERR_INT_ST_S)
|
|
|
+#define RMT_CH3_ERR_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH3_ERR_INT_ST_S 7
|
|
|
+/** RMT_CH0_TX_THR_EVENT_INT_ST : RO; bitpos: [8]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH0_TX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_ST (BIT(8))
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_ST_M (RMT_CH0_TX_THR_EVENT_INT_ST_V << RMT_CH0_TX_THR_EVENT_INT_ST_S)
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_ST_S 8
|
|
|
+/** RMT_CH1_TX_THR_EVENT_INT_ST : RO; bitpos: [9]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH1_TX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_ST (BIT(9))
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_ST_M (RMT_CH1_TX_THR_EVENT_INT_ST_V << RMT_CH1_TX_THR_EVENT_INT_ST_S)
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_ST_S 9
|
|
|
+/** RMT_CH2_TX_THR_EVENT_INT_ST : RO; bitpos: [10]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH2_TX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_ST (BIT(10))
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_ST_M (RMT_CH2_TX_THR_EVENT_INT_ST_V << RMT_CH2_TX_THR_EVENT_INT_ST_S)
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_ST_S 10
|
|
|
+/** RMT_CH3_TX_THR_EVENT_INT_ST : RO; bitpos: [11]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH3_TX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_ST (BIT(11))
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_ST_M (RMT_CH3_TX_THR_EVENT_INT_ST_V << RMT_CH3_TX_THR_EVENT_INT_ST_S)
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_ST_S 11
|
|
|
+/** RMT_CH0_TX_LOOP_INT_ST : RO; bitpos: [12]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH0_TX_LOOP_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH0_TX_LOOP_INT_ST (BIT(12))
|
|
|
+#define RMT_CH0_TX_LOOP_INT_ST_M (RMT_CH0_TX_LOOP_INT_ST_V << RMT_CH0_TX_LOOP_INT_ST_S)
|
|
|
+#define RMT_CH0_TX_LOOP_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH0_TX_LOOP_INT_ST_S 12
|
|
|
+/** RMT_CH1_TX_LOOP_INT_ST : RO; bitpos: [13]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH1_TX_LOOP_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH1_TX_LOOP_INT_ST (BIT(13))
|
|
|
+#define RMT_CH1_TX_LOOP_INT_ST_M (RMT_CH1_TX_LOOP_INT_ST_V << RMT_CH1_TX_LOOP_INT_ST_S)
|
|
|
+#define RMT_CH1_TX_LOOP_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH1_TX_LOOP_INT_ST_S 13
|
|
|
+/** RMT_CH2_TX_LOOP_INT_ST : RO; bitpos: [14]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH2_TX_LOOP_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH2_TX_LOOP_INT_ST (BIT(14))
|
|
|
+#define RMT_CH2_TX_LOOP_INT_ST_M (RMT_CH2_TX_LOOP_INT_ST_V << RMT_CH2_TX_LOOP_INT_ST_S)
|
|
|
+#define RMT_CH2_TX_LOOP_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH2_TX_LOOP_INT_ST_S 14
|
|
|
+/** RMT_CH3_TX_LOOP_INT_ST : RO; bitpos: [15]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH3_TX_LOOP_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH3_TX_LOOP_INT_ST (BIT(15))
|
|
|
+#define RMT_CH3_TX_LOOP_INT_ST_M (RMT_CH3_TX_LOOP_INT_ST_V << RMT_CH3_TX_LOOP_INT_ST_S)
|
|
|
+#define RMT_CH3_TX_LOOP_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH3_TX_LOOP_INT_ST_S 15
|
|
|
+/** RMT_CH4_RX_END_INT_ST : RO; bitpos: [16]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH4_RX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH4_RX_END_INT_ST (BIT(16))
|
|
|
+#define RMT_CH4_RX_END_INT_ST_M (RMT_CH4_RX_END_INT_ST_V << RMT_CH4_RX_END_INT_ST_S)
|
|
|
+#define RMT_CH4_RX_END_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH4_RX_END_INT_ST_S 16
|
|
|
+/** RMT_CH5_RX_END_INT_ST : RO; bitpos: [17]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH5_RX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH5_RX_END_INT_ST (BIT(17))
|
|
|
+#define RMT_CH5_RX_END_INT_ST_M (RMT_CH5_RX_END_INT_ST_V << RMT_CH5_RX_END_INT_ST_S)
|
|
|
+#define RMT_CH5_RX_END_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH5_RX_END_INT_ST_S 17
|
|
|
+/** RMT_CH6_RX_END_INT_ST : RO; bitpos: [18]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH6_RX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH6_RX_END_INT_ST (BIT(18))
|
|
|
+#define RMT_CH6_RX_END_INT_ST_M (RMT_CH6_RX_END_INT_ST_V << RMT_CH6_RX_END_INT_ST_S)
|
|
|
+#define RMT_CH6_RX_END_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH6_RX_END_INT_ST_S 18
|
|
|
+/** RMT_CH7_RX_END_INT_ST : RO; bitpos: [19]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH7_RX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH7_RX_END_INT_ST (BIT(19))
|
|
|
+#define RMT_CH7_RX_END_INT_ST_M (RMT_CH7_RX_END_INT_ST_V << RMT_CH7_RX_END_INT_ST_S)
|
|
|
+#define RMT_CH7_RX_END_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH7_RX_END_INT_ST_S 19
|
|
|
+/** RMT_CH4_ERR_INT_ST : RO; bitpos: [20]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH4_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH4_ERR_INT_ST (BIT(20))
|
|
|
+#define RMT_CH4_ERR_INT_ST_M (RMT_CH4_ERR_INT_ST_V << RMT_CH4_ERR_INT_ST_S)
|
|
|
+#define RMT_CH4_ERR_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH4_ERR_INT_ST_S 20
|
|
|
+/** RMT_CH5_ERR_INT_ST : RO; bitpos: [21]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH5_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH5_ERR_INT_ST (BIT(21))
|
|
|
+#define RMT_CH5_ERR_INT_ST_M (RMT_CH5_ERR_INT_ST_V << RMT_CH5_ERR_INT_ST_S)
|
|
|
+#define RMT_CH5_ERR_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH5_ERR_INT_ST_S 21
|
|
|
+/** RMT_CH6_ERR_INT_ST : RO; bitpos: [22]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH6_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH6_ERR_INT_ST (BIT(22))
|
|
|
+#define RMT_CH6_ERR_INT_ST_M (RMT_CH6_ERR_INT_ST_V << RMT_CH6_ERR_INT_ST_S)
|
|
|
+#define RMT_CH6_ERR_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH6_ERR_INT_ST_S 22
|
|
|
+/** RMT_CH7_ERR_INT_ST : RO; bitpos: [23]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH7_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH7_ERR_INT_ST (BIT(23))
|
|
|
+#define RMT_CH7_ERR_INT_ST_M (RMT_CH7_ERR_INT_ST_V << RMT_CH7_ERR_INT_ST_S)
|
|
|
+#define RMT_CH7_ERR_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH7_ERR_INT_ST_S 23
|
|
|
+/** RMT_CH4_RX_THR_EVENT_INT_ST : RO; bitpos: [24]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH4_RX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_ST (BIT(24))
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_ST_M (RMT_CH4_RX_THR_EVENT_INT_ST_V << RMT_CH4_RX_THR_EVENT_INT_ST_S)
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_ST_S 24
|
|
|
+/** RMT_CH5_RX_THR_EVENT_INT_ST : RO; bitpos: [25]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH5_RX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_ST (BIT(25))
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_ST_M (RMT_CH5_RX_THR_EVENT_INT_ST_V << RMT_CH5_RX_THR_EVENT_INT_ST_S)
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_ST_S 25
|
|
|
+/** RMT_CH6_RX_THR_EVENT_INT_ST : RO; bitpos: [26]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH6_RX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_ST (BIT(26))
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_ST_M (RMT_CH6_RX_THR_EVENT_INT_ST_V << RMT_CH6_RX_THR_EVENT_INT_ST_S)
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_ST_S 26
|
|
|
+/** RMT_CH7_RX_THR_EVENT_INT_ST : RO; bitpos: [27]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH7_RX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_ST (BIT(27))
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_ST_M (RMT_CH7_RX_THR_EVENT_INT_ST_V << RMT_CH7_RX_THR_EVENT_INT_ST_S)
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_ST_S 27
|
|
|
+/** RMT_CH3_DMA_ACCESS_FAIL_INT_ST : RO; bitpos: [28]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH3_DMA_ACCESS_FAIL_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_ST (BIT(28))
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_ST_M (RMT_CH3_DMA_ACCESS_FAIL_INT_ST_V << RMT_CH3_DMA_ACCESS_FAIL_INT_ST_S)
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_ST_S 28
|
|
|
+/** RMT_CH7_DMA_ACCESS_FAIL_INT_ST : RO; bitpos: [29]; default: 0;
|
|
|
+ * The masked interrupt status bit for CH7_DMA_ACCESS_FAIL_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_ST (BIT(29))
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_ST_M (RMT_CH7_DMA_ACCESS_FAIL_INT_ST_V << RMT_CH7_DMA_ACCESS_FAIL_INT_ST_S)
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_ST_V 0x00000001U
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_ST_S 29
|
|
|
|
|
|
-#define RMT_INT_ENA_REG (DR_REG_RMT_BASE + 0x78)
|
|
|
-/* RMT_CH7_DMA_ACCESS_FAIL_INT_ENA : R/W ;bitpos:[29] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$m_DMA_ACCESS_FAIL_INT..*/
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_ENA (BIT(29))
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_ENA_M (BIT(29))
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_ENA_V 0x1
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_ENA_S 29
|
|
|
-/* RMT_CH3_DMA_ACCESS_FAIL_INT_ENA : R/W ;bitpos:[28] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_DMA_ACCESS_FAIL_INT..*/
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_ENA (BIT(28))
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_ENA_M (BIT(28))
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_ENA_V 0x1
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_ENA_S 28
|
|
|
-/* RMT_CH7_RX_THR_EVENT_INT_ENA : R/W ;bitpos:[27] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$m_RX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_ENA (BIT(27))
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_ENA_M (BIT(27))
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_ENA_V 0x1
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_ENA_S 27
|
|
|
-/* RMT_CH6_RX_THR_EVENT_INT_ENA : R/W ;bitpos:[26] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$m_RX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_ENA (BIT(26))
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_ENA_M (BIT(26))
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_ENA_V 0x1
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_ENA_S 26
|
|
|
-/* RMT_CH5_RX_THR_EVENT_INT_ENA : R/W ;bitpos:[25] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$m_RX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_ENA (BIT(25))
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_ENA_M (BIT(25))
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_ENA_V 0x1
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_ENA_S 25
|
|
|
-/* RMT_CH4_RX_THR_EVENT_INT_ENA : R/W ;bitpos:[24] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$m_RX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_ENA (BIT(24))
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_ENA_M (BIT(24))
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_ENA_V 0x1
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_ENA_S 24
|
|
|
-/* RMT_CH7_ERR_INT_ENA : R/W ;bitpos:[23] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$m_ERR_INT..*/
|
|
|
-#define RMT_CH7_ERR_INT_ENA (BIT(23))
|
|
|
-#define RMT_CH7_ERR_INT_ENA_M (BIT(23))
|
|
|
-#define RMT_CH7_ERR_INT_ENA_V 0x1
|
|
|
-#define RMT_CH7_ERR_INT_ENA_S 23
|
|
|
-/* RMT_CH6_ERR_INT_ENA : R/W ;bitpos:[22] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$m_ERR_INT..*/
|
|
|
-#define RMT_CH6_ERR_INT_ENA (BIT(22))
|
|
|
-#define RMT_CH6_ERR_INT_ENA_M (BIT(22))
|
|
|
-#define RMT_CH6_ERR_INT_ENA_V 0x1
|
|
|
-#define RMT_CH6_ERR_INT_ENA_S 22
|
|
|
-/* RMT_CH5_ERR_INT_ENA : R/W ;bitpos:[21] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$m_ERR_INT..*/
|
|
|
-#define RMT_CH5_ERR_INT_ENA (BIT(21))
|
|
|
-#define RMT_CH5_ERR_INT_ENA_M (BIT(21))
|
|
|
-#define RMT_CH5_ERR_INT_ENA_V 0x1
|
|
|
-#define RMT_CH5_ERR_INT_ENA_S 21
|
|
|
-/* RMT_CH4_ERR_INT_ENA : R/W ;bitpos:[20] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$m_ERR_INT..*/
|
|
|
-#define RMT_CH4_ERR_INT_ENA (BIT(20))
|
|
|
-#define RMT_CH4_ERR_INT_ENA_M (BIT(20))
|
|
|
-#define RMT_CH4_ERR_INT_ENA_V 0x1
|
|
|
-#define RMT_CH4_ERR_INT_ENA_S 20
|
|
|
-/* RMT_CH7_RX_END_INT_ENA : R/W ;bitpos:[19] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$m_RX_END_INT..*/
|
|
|
-#define RMT_CH7_RX_END_INT_ENA (BIT(19))
|
|
|
-#define RMT_CH7_RX_END_INT_ENA_M (BIT(19))
|
|
|
-#define RMT_CH7_RX_END_INT_ENA_V 0x1
|
|
|
-#define RMT_CH7_RX_END_INT_ENA_S 19
|
|
|
-/* RMT_CH6_RX_END_INT_ENA : R/W ;bitpos:[18] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$m_RX_END_INT..*/
|
|
|
-#define RMT_CH6_RX_END_INT_ENA (BIT(18))
|
|
|
-#define RMT_CH6_RX_END_INT_ENA_M (BIT(18))
|
|
|
-#define RMT_CH6_RX_END_INT_ENA_V 0x1
|
|
|
-#define RMT_CH6_RX_END_INT_ENA_S 18
|
|
|
-/* RMT_CH5_RX_END_INT_ENA : R/W ;bitpos:[17] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$m_RX_END_INT..*/
|
|
|
-#define RMT_CH5_RX_END_INT_ENA (BIT(17))
|
|
|
-#define RMT_CH5_RX_END_INT_ENA_M (BIT(17))
|
|
|
-#define RMT_CH5_RX_END_INT_ENA_V 0x1
|
|
|
-#define RMT_CH5_RX_END_INT_ENA_S 17
|
|
|
-/* RMT_CH4_RX_END_INT_ENA : R/W ;bitpos:[16] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$m_RX_END_INT..*/
|
|
|
-#define RMT_CH4_RX_END_INT_ENA (BIT(16))
|
|
|
-#define RMT_CH4_RX_END_INT_ENA_M (BIT(16))
|
|
|
-#define RMT_CH4_RX_END_INT_ENA_V 0x1
|
|
|
-#define RMT_CH4_RX_END_INT_ENA_S 16
|
|
|
-/* RMT_CH3_TX_LOOP_INT_ENA : R/W ;bitpos:[15] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_TX_LOOP_INT..*/
|
|
|
-#define RMT_CH3_TX_LOOP_INT_ENA (BIT(15))
|
|
|
-#define RMT_CH3_TX_LOOP_INT_ENA_M (BIT(15))
|
|
|
-#define RMT_CH3_TX_LOOP_INT_ENA_V 0x1
|
|
|
-#define RMT_CH3_TX_LOOP_INT_ENA_S 15
|
|
|
-/* RMT_CH2_TX_LOOP_INT_ENA : R/W ;bitpos:[14] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_TX_LOOP_INT..*/
|
|
|
-#define RMT_CH2_TX_LOOP_INT_ENA (BIT(14))
|
|
|
-#define RMT_CH2_TX_LOOP_INT_ENA_M (BIT(14))
|
|
|
-#define RMT_CH2_TX_LOOP_INT_ENA_V 0x1
|
|
|
-#define RMT_CH2_TX_LOOP_INT_ENA_S 14
|
|
|
-/* RMT_CH1_TX_LOOP_INT_ENA : R/W ;bitpos:[13] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_TX_LOOP_INT..*/
|
|
|
-#define RMT_CH1_TX_LOOP_INT_ENA (BIT(13))
|
|
|
-#define RMT_CH1_TX_LOOP_INT_ENA_M (BIT(13))
|
|
|
-#define RMT_CH1_TX_LOOP_INT_ENA_V 0x1
|
|
|
-#define RMT_CH1_TX_LOOP_INT_ENA_S 13
|
|
|
-/* RMT_CH0_TX_LOOP_INT_ENA : R/W ;bitpos:[12] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_TX_LOOP_INT..*/
|
|
|
-#define RMT_CH0_TX_LOOP_INT_ENA (BIT(12))
|
|
|
-#define RMT_CH0_TX_LOOP_INT_ENA_M (BIT(12))
|
|
|
-#define RMT_CH0_TX_LOOP_INT_ENA_V 0x1
|
|
|
-#define RMT_CH0_TX_LOOP_INT_ENA_S 12
|
|
|
-/* RMT_CH3_TX_THR_EVENT_INT_ENA : R/W ;bitpos:[11] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_TX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_ENA (BIT(11))
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_ENA_M (BIT(11))
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_ENA_V 0x1
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_ENA_S 11
|
|
|
-/* RMT_CH2_TX_THR_EVENT_INT_ENA : R/W ;bitpos:[10] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_TX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_ENA (BIT(10))
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_ENA_M (BIT(10))
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_ENA_V 0x1
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_ENA_S 10
|
|
|
-/* RMT_CH1_TX_THR_EVENT_INT_ENA : R/W ;bitpos:[9] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_TX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_ENA (BIT(9))
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_ENA_M (BIT(9))
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_ENA_V 0x1
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_ENA_S 9
|
|
|
-/* RMT_CH0_TX_THR_EVENT_INT_ENA : R/W ;bitpos:[8] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_TX_THR_EVENT_INT..*/
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_ENA (BIT(8))
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_ENA_M (BIT(8))
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_ENA_V 0x1
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_ENA_S 8
|
|
|
-/* RMT_CH3_ERR_INT_ENA : R/W ;bitpos:[7] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_ERR_INT..*/
|
|
|
-#define RMT_CH3_ERR_INT_ENA (BIT(7))
|
|
|
-#define RMT_CH3_ERR_INT_ENA_M (BIT(7))
|
|
|
-#define RMT_CH3_ERR_INT_ENA_V 0x1
|
|
|
-#define RMT_CH3_ERR_INT_ENA_S 7
|
|
|
-/* RMT_CH2_ERR_INT_ENA : R/W ;bitpos:[6] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_ERR_INT..*/
|
|
|
-#define RMT_CH2_ERR_INT_ENA (BIT(6))
|
|
|
-#define RMT_CH2_ERR_INT_ENA_M (BIT(6))
|
|
|
-#define RMT_CH2_ERR_INT_ENA_V 0x1
|
|
|
-#define RMT_CH2_ERR_INT_ENA_S 6
|
|
|
-/* RMT_CH1_ERR_INT_ENA : R/W ;bitpos:[5] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_ERR_INT..*/
|
|
|
-#define RMT_CH1_ERR_INT_ENA (BIT(5))
|
|
|
-#define RMT_CH1_ERR_INT_ENA_M (BIT(5))
|
|
|
-#define RMT_CH1_ERR_INT_ENA_V 0x1
|
|
|
-#define RMT_CH1_ERR_INT_ENA_S 5
|
|
|
-/* RMT_CH0_ERR_INT_ENA : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_ERR_INT..*/
|
|
|
-#define RMT_CH0_ERR_INT_ENA (BIT(4))
|
|
|
-#define RMT_CH0_ERR_INT_ENA_M (BIT(4))
|
|
|
-#define RMT_CH0_ERR_INT_ENA_V 0x1
|
|
|
-#define RMT_CH0_ERR_INT_ENA_S 4
|
|
|
-/* RMT_CH3_TX_END_INT_ENA : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_TX_END_INT..*/
|
|
|
-#define RMT_CH3_TX_END_INT_ENA (BIT(3))
|
|
|
-#define RMT_CH3_TX_END_INT_ENA_M (BIT(3))
|
|
|
-#define RMT_CH3_TX_END_INT_ENA_V 0x1
|
|
|
-#define RMT_CH3_TX_END_INT_ENA_S 3
|
|
|
-/* RMT_CH2_TX_END_INT_ENA : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_TX_END_INT..*/
|
|
|
-#define RMT_CH2_TX_END_INT_ENA (BIT(2))
|
|
|
-#define RMT_CH2_TX_END_INT_ENA_M (BIT(2))
|
|
|
-#define RMT_CH2_TX_END_INT_ENA_V 0x1
|
|
|
-#define RMT_CH2_TX_END_INT_ENA_S 2
|
|
|
-/* RMT_CH1_TX_END_INT_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_TX_END_INT..*/
|
|
|
-#define RMT_CH1_TX_END_INT_ENA (BIT(1))
|
|
|
-#define RMT_CH1_TX_END_INT_ENA_M (BIT(1))
|
|
|
-#define RMT_CH1_TX_END_INT_ENA_V 0x1
|
|
|
-#define RMT_CH1_TX_END_INT_ENA_S 1
|
|
|
-/* RMT_CH0_TX_END_INT_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
|
-/*description: The interrupt enable bit for CH$n_TX_END_INT..*/
|
|
|
+/** RMT_INT_ENA_REG register
|
|
|
+ * Interrupt enable bits
|
|
|
+ */
|
|
|
+#define RMT_INT_ENA_REG (DR_REG_RMT_BASE + 0x78)
|
|
|
+/** RMT_CH0_TX_END_INT_ENA : R/W; bitpos: [0]; default: 0;
|
|
|
+ * The interrupt enable bit for CH0_TX_END_INT.
|
|
|
+ */
|
|
|
#define RMT_CH0_TX_END_INT_ENA (BIT(0))
|
|
|
-#define RMT_CH0_TX_END_INT_ENA_M (BIT(0))
|
|
|
-#define RMT_CH0_TX_END_INT_ENA_V 0x1
|
|
|
+#define RMT_CH0_TX_END_INT_ENA_M (RMT_CH0_TX_END_INT_ENA_V << RMT_CH0_TX_END_INT_ENA_S)
|
|
|
+#define RMT_CH0_TX_END_INT_ENA_V 0x00000001U
|
|
|
#define RMT_CH0_TX_END_INT_ENA_S 0
|
|
|
+/** RMT_CH1_TX_END_INT_ENA : R/W; bitpos: [1]; default: 0;
|
|
|
+ * The interrupt enable bit for CH1_TX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH1_TX_END_INT_ENA (BIT(1))
|
|
|
+#define RMT_CH1_TX_END_INT_ENA_M (RMT_CH1_TX_END_INT_ENA_V << RMT_CH1_TX_END_INT_ENA_S)
|
|
|
+#define RMT_CH1_TX_END_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH1_TX_END_INT_ENA_S 1
|
|
|
+/** RMT_CH2_TX_END_INT_ENA : R/W; bitpos: [2]; default: 0;
|
|
|
+ * The interrupt enable bit for CH2_TX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH2_TX_END_INT_ENA (BIT(2))
|
|
|
+#define RMT_CH2_TX_END_INT_ENA_M (RMT_CH2_TX_END_INT_ENA_V << RMT_CH2_TX_END_INT_ENA_S)
|
|
|
+#define RMT_CH2_TX_END_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH2_TX_END_INT_ENA_S 2
|
|
|
+/** RMT_CH3_TX_END_INT_ENA : R/W; bitpos: [3]; default: 0;
|
|
|
+ * The interrupt enable bit for CH3_TX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH3_TX_END_INT_ENA (BIT(3))
|
|
|
+#define RMT_CH3_TX_END_INT_ENA_M (RMT_CH3_TX_END_INT_ENA_V << RMT_CH3_TX_END_INT_ENA_S)
|
|
|
+#define RMT_CH3_TX_END_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH3_TX_END_INT_ENA_S 3
|
|
|
+/** RMT_CH0_ERR_INT_ENA : R/W; bitpos: [4]; default: 0;
|
|
|
+ * The interrupt enable bit for CH0_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH0_ERR_INT_ENA (BIT(4))
|
|
|
+#define RMT_CH0_ERR_INT_ENA_M (RMT_CH0_ERR_INT_ENA_V << RMT_CH0_ERR_INT_ENA_S)
|
|
|
+#define RMT_CH0_ERR_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH0_ERR_INT_ENA_S 4
|
|
|
+/** RMT_CH1_ERR_INT_ENA : R/W; bitpos: [5]; default: 0;
|
|
|
+ * The interrupt enable bit for CH1_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH1_ERR_INT_ENA (BIT(5))
|
|
|
+#define RMT_CH1_ERR_INT_ENA_M (RMT_CH1_ERR_INT_ENA_V << RMT_CH1_ERR_INT_ENA_S)
|
|
|
+#define RMT_CH1_ERR_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH1_ERR_INT_ENA_S 5
|
|
|
+/** RMT_CH2_ERR_INT_ENA : R/W; bitpos: [6]; default: 0;
|
|
|
+ * The interrupt enable bit for CH2_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH2_ERR_INT_ENA (BIT(6))
|
|
|
+#define RMT_CH2_ERR_INT_ENA_M (RMT_CH2_ERR_INT_ENA_V << RMT_CH2_ERR_INT_ENA_S)
|
|
|
+#define RMT_CH2_ERR_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH2_ERR_INT_ENA_S 6
|
|
|
+/** RMT_CH3_ERR_INT_ENA : R/W; bitpos: [7]; default: 0;
|
|
|
+ * The interrupt enable bit for CH3_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH3_ERR_INT_ENA (BIT(7))
|
|
|
+#define RMT_CH3_ERR_INT_ENA_M (RMT_CH3_ERR_INT_ENA_V << RMT_CH3_ERR_INT_ENA_S)
|
|
|
+#define RMT_CH3_ERR_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH3_ERR_INT_ENA_S 7
|
|
|
+/** RMT_CH0_TX_THR_EVENT_INT_ENA : R/W; bitpos: [8]; default: 0;
|
|
|
+ * The interrupt enable bit for CH0_TX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_ENA (BIT(8))
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_ENA_M (RMT_CH0_TX_THR_EVENT_INT_ENA_V << RMT_CH0_TX_THR_EVENT_INT_ENA_S)
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_ENA_S 8
|
|
|
+/** RMT_CH1_TX_THR_EVENT_INT_ENA : R/W; bitpos: [9]; default: 0;
|
|
|
+ * The interrupt enable bit for CH1_TX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_ENA (BIT(9))
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_ENA_M (RMT_CH1_TX_THR_EVENT_INT_ENA_V << RMT_CH1_TX_THR_EVENT_INT_ENA_S)
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_ENA_S 9
|
|
|
+/** RMT_CH2_TX_THR_EVENT_INT_ENA : R/W; bitpos: [10]; default: 0;
|
|
|
+ * The interrupt enable bit for CH2_TX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_ENA (BIT(10))
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_ENA_M (RMT_CH2_TX_THR_EVENT_INT_ENA_V << RMT_CH2_TX_THR_EVENT_INT_ENA_S)
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_ENA_S 10
|
|
|
+/** RMT_CH3_TX_THR_EVENT_INT_ENA : R/W; bitpos: [11]; default: 0;
|
|
|
+ * The interrupt enable bit for CH3_TX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_ENA (BIT(11))
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_ENA_M (RMT_CH3_TX_THR_EVENT_INT_ENA_V << RMT_CH3_TX_THR_EVENT_INT_ENA_S)
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_ENA_S 11
|
|
|
+/** RMT_CH0_TX_LOOP_INT_ENA : R/W; bitpos: [12]; default: 0;
|
|
|
+ * The interrupt enable bit for CH0_TX_LOOP_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH0_TX_LOOP_INT_ENA (BIT(12))
|
|
|
+#define RMT_CH0_TX_LOOP_INT_ENA_M (RMT_CH0_TX_LOOP_INT_ENA_V << RMT_CH0_TX_LOOP_INT_ENA_S)
|
|
|
+#define RMT_CH0_TX_LOOP_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH0_TX_LOOP_INT_ENA_S 12
|
|
|
+/** RMT_CH1_TX_LOOP_INT_ENA : R/W; bitpos: [13]; default: 0;
|
|
|
+ * The interrupt enable bit for CH1_TX_LOOP_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH1_TX_LOOP_INT_ENA (BIT(13))
|
|
|
+#define RMT_CH1_TX_LOOP_INT_ENA_M (RMT_CH1_TX_LOOP_INT_ENA_V << RMT_CH1_TX_LOOP_INT_ENA_S)
|
|
|
+#define RMT_CH1_TX_LOOP_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH1_TX_LOOP_INT_ENA_S 13
|
|
|
+/** RMT_CH2_TX_LOOP_INT_ENA : R/W; bitpos: [14]; default: 0;
|
|
|
+ * The interrupt enable bit for CH2_TX_LOOP_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH2_TX_LOOP_INT_ENA (BIT(14))
|
|
|
+#define RMT_CH2_TX_LOOP_INT_ENA_M (RMT_CH2_TX_LOOP_INT_ENA_V << RMT_CH2_TX_LOOP_INT_ENA_S)
|
|
|
+#define RMT_CH2_TX_LOOP_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH2_TX_LOOP_INT_ENA_S 14
|
|
|
+/** RMT_CH3_TX_LOOP_INT_ENA : R/W; bitpos: [15]; default: 0;
|
|
|
+ * The interrupt enable bit for CH3_TX_LOOP_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH3_TX_LOOP_INT_ENA (BIT(15))
|
|
|
+#define RMT_CH3_TX_LOOP_INT_ENA_M (RMT_CH3_TX_LOOP_INT_ENA_V << RMT_CH3_TX_LOOP_INT_ENA_S)
|
|
|
+#define RMT_CH3_TX_LOOP_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH3_TX_LOOP_INT_ENA_S 15
|
|
|
+/** RMT_CH4_RX_END_INT_ENA : R/W; bitpos: [16]; default: 0;
|
|
|
+ * The interrupt enable bit for CH4_RX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH4_RX_END_INT_ENA (BIT(16))
|
|
|
+#define RMT_CH4_RX_END_INT_ENA_M (RMT_CH4_RX_END_INT_ENA_V << RMT_CH4_RX_END_INT_ENA_S)
|
|
|
+#define RMT_CH4_RX_END_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH4_RX_END_INT_ENA_S 16
|
|
|
+/** RMT_CH5_RX_END_INT_ENA : R/W; bitpos: [17]; default: 0;
|
|
|
+ * The interrupt enable bit for CH5_RX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH5_RX_END_INT_ENA (BIT(17))
|
|
|
+#define RMT_CH5_RX_END_INT_ENA_M (RMT_CH5_RX_END_INT_ENA_V << RMT_CH5_RX_END_INT_ENA_S)
|
|
|
+#define RMT_CH5_RX_END_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH5_RX_END_INT_ENA_S 17
|
|
|
+/** RMT_CH6_RX_END_INT_ENA : R/W; bitpos: [18]; default: 0;
|
|
|
+ * The interrupt enable bit for CH6_RX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH6_RX_END_INT_ENA (BIT(18))
|
|
|
+#define RMT_CH6_RX_END_INT_ENA_M (RMT_CH6_RX_END_INT_ENA_V << RMT_CH6_RX_END_INT_ENA_S)
|
|
|
+#define RMT_CH6_RX_END_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH6_RX_END_INT_ENA_S 18
|
|
|
+/** RMT_CH7_RX_END_INT_ENA : R/W; bitpos: [19]; default: 0;
|
|
|
+ * The interrupt enable bit for CH7_RX_END_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH7_RX_END_INT_ENA (BIT(19))
|
|
|
+#define RMT_CH7_RX_END_INT_ENA_M (RMT_CH7_RX_END_INT_ENA_V << RMT_CH7_RX_END_INT_ENA_S)
|
|
|
+#define RMT_CH7_RX_END_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH7_RX_END_INT_ENA_S 19
|
|
|
+/** RMT_CH4_ERR_INT_ENA : R/W; bitpos: [20]; default: 0;
|
|
|
+ * The interrupt enable bit for CH4_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH4_ERR_INT_ENA (BIT(20))
|
|
|
+#define RMT_CH4_ERR_INT_ENA_M (RMT_CH4_ERR_INT_ENA_V << RMT_CH4_ERR_INT_ENA_S)
|
|
|
+#define RMT_CH4_ERR_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH4_ERR_INT_ENA_S 20
|
|
|
+/** RMT_CH5_ERR_INT_ENA : R/W; bitpos: [21]; default: 0;
|
|
|
+ * The interrupt enable bit for CH5_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH5_ERR_INT_ENA (BIT(21))
|
|
|
+#define RMT_CH5_ERR_INT_ENA_M (RMT_CH5_ERR_INT_ENA_V << RMT_CH5_ERR_INT_ENA_S)
|
|
|
+#define RMT_CH5_ERR_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH5_ERR_INT_ENA_S 21
|
|
|
+/** RMT_CH6_ERR_INT_ENA : R/W; bitpos: [22]; default: 0;
|
|
|
+ * The interrupt enable bit for CH6_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH6_ERR_INT_ENA (BIT(22))
|
|
|
+#define RMT_CH6_ERR_INT_ENA_M (RMT_CH6_ERR_INT_ENA_V << RMT_CH6_ERR_INT_ENA_S)
|
|
|
+#define RMT_CH6_ERR_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH6_ERR_INT_ENA_S 22
|
|
|
+/** RMT_CH7_ERR_INT_ENA : R/W; bitpos: [23]; default: 0;
|
|
|
+ * The interrupt enable bit for CH7_ERR_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH7_ERR_INT_ENA (BIT(23))
|
|
|
+#define RMT_CH7_ERR_INT_ENA_M (RMT_CH7_ERR_INT_ENA_V << RMT_CH7_ERR_INT_ENA_S)
|
|
|
+#define RMT_CH7_ERR_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH7_ERR_INT_ENA_S 23
|
|
|
+/** RMT_CH4_RX_THR_EVENT_INT_ENA : R/W; bitpos: [24]; default: 0;
|
|
|
+ * The interrupt enable bit for CH4_RX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_ENA (BIT(24))
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_ENA_M (RMT_CH4_RX_THR_EVENT_INT_ENA_V << RMT_CH4_RX_THR_EVENT_INT_ENA_S)
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_ENA_S 24
|
|
|
+/** RMT_CH5_RX_THR_EVENT_INT_ENA : R/W; bitpos: [25]; default: 0;
|
|
|
+ * The interrupt enable bit for CH5_RX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_ENA (BIT(25))
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_ENA_M (RMT_CH5_RX_THR_EVENT_INT_ENA_V << RMT_CH5_RX_THR_EVENT_INT_ENA_S)
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_ENA_S 25
|
|
|
+/** RMT_CH6_RX_THR_EVENT_INT_ENA : R/W; bitpos: [26]; default: 0;
|
|
|
+ * The interrupt enable bit for CH6_RX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_ENA (BIT(26))
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_ENA_M (RMT_CH6_RX_THR_EVENT_INT_ENA_V << RMT_CH6_RX_THR_EVENT_INT_ENA_S)
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_ENA_S 26
|
|
|
+/** RMT_CH7_RX_THR_EVENT_INT_ENA : R/W; bitpos: [27]; default: 0;
|
|
|
+ * The interrupt enable bit for CH7_RX_THR_EVENT_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_ENA (BIT(27))
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_ENA_M (RMT_CH7_RX_THR_EVENT_INT_ENA_V << RMT_CH7_RX_THR_EVENT_INT_ENA_S)
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_ENA_S 27
|
|
|
+/** RMT_CH3_DMA_ACCESS_FAIL_INT_ENA : R/W; bitpos: [28]; default: 0;
|
|
|
+ * The interrupt enable bit for CH3_DMA_ACCESS_FAIL_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_ENA (BIT(28))
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_ENA_M (RMT_CH3_DMA_ACCESS_FAIL_INT_ENA_V << RMT_CH3_DMA_ACCESS_FAIL_INT_ENA_S)
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_ENA_S 28
|
|
|
+/** RMT_CH7_DMA_ACCESS_FAIL_INT_ENA : R/W; bitpos: [29]; default: 0;
|
|
|
+ * The interrupt enable bit for CH7_DMA_ACCESS_FAIL_INT.
|
|
|
+ */
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_ENA (BIT(29))
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_ENA_M (RMT_CH7_DMA_ACCESS_FAIL_INT_ENA_V << RMT_CH7_DMA_ACCESS_FAIL_INT_ENA_S)
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_ENA_V 0x00000001U
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_ENA_S 29
|
|
|
|
|
|
-#define RMT_INT_CLR_REG (DR_REG_RMT_BASE + 0x7C)
|
|
|
-/* RMT_CH7_DMA_ACCESS_FAIL_INT_CLR : WT ;bitpos:[29] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear the CH$m_DMA_ACCESS_FAIL_INT interrupt..*/
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_CLR (BIT(29))
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_CLR_M (BIT(29))
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_CLR_V 0x1
|
|
|
-#define RMT_CH7_DMA_ACCESS_FAIL_INT_CLR_S 29
|
|
|
-/* RMT_CH3_DMA_ACCESS_FAIL_INT_CLR : WT ;bitpos:[28] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear the CH$n_DMA_ACCESS_FAIL_INT interrupt..*/
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_CLR (BIT(28))
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_CLR_M (BIT(28))
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_CLR_V 0x1
|
|
|
-#define RMT_CH3_DMA_ACCESS_FAIL_INT_CLR_S 28
|
|
|
-/* RMT_CH7_RX_THR_EVENT_INT_CLR : WT ;bitpos:[27] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$m_RX_THR_EVENT_INT interrupt..*/
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_CLR (BIT(27))
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_CLR_M (BIT(27))
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_CLR_V 0x1
|
|
|
-#define RMT_CH7_RX_THR_EVENT_INT_CLR_S 27
|
|
|
-/* RMT_CH6_RX_THR_EVENT_INT_CLR : WT ;bitpos:[26] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$m_RX_THR_EVENT_INT interrupt..*/
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_CLR (BIT(26))
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_CLR_M (BIT(26))
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_CLR_V 0x1
|
|
|
-#define RMT_CH6_RX_THR_EVENT_INT_CLR_S 26
|
|
|
-/* RMT_CH5_RX_THR_EVENT_INT_CLR : WT ;bitpos:[25] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$m_RX_THR_EVENT_INT interrupt..*/
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_CLR (BIT(25))
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_CLR_M (BIT(25))
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_CLR_V 0x1
|
|
|
-#define RMT_CH5_RX_THR_EVENT_INT_CLR_S 25
|
|
|
-/* RMT_CH4_RX_THR_EVENT_INT_CLR : WT ;bitpos:[24] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$m_RX_THR_EVENT_INT interrupt..*/
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_CLR (BIT(24))
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_CLR_M (BIT(24))
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_CLR_V 0x1
|
|
|
-#define RMT_CH4_RX_THR_EVENT_INT_CLR_S 24
|
|
|
-/* RMT_CH7_ERR_INT_CLR : WT ;bitpos:[23] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$m_ERR_INT interrupt..*/
|
|
|
-#define RMT_CH7_ERR_INT_CLR (BIT(23))
|
|
|
-#define RMT_CH7_ERR_INT_CLR_M (BIT(23))
|
|
|
-#define RMT_CH7_ERR_INT_CLR_V 0x1
|
|
|
-#define RMT_CH7_ERR_INT_CLR_S 23
|
|
|
-/* RMT_CH6_ERR_INT_CLR : WT ;bitpos:[22] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$m_ERR_INT interrupt..*/
|
|
|
-#define RMT_CH6_ERR_INT_CLR (BIT(22))
|
|
|
-#define RMT_CH6_ERR_INT_CLR_M (BIT(22))
|
|
|
-#define RMT_CH6_ERR_INT_CLR_V 0x1
|
|
|
-#define RMT_CH6_ERR_INT_CLR_S 22
|
|
|
-/* RMT_CH5_ERR_INT_CLR : WT ;bitpos:[21] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$m_ERR_INT interrupt..*/
|
|
|
-#define RMT_CH5_ERR_INT_CLR (BIT(21))
|
|
|
-#define RMT_CH5_ERR_INT_CLR_M (BIT(21))
|
|
|
-#define RMT_CH5_ERR_INT_CLR_V 0x1
|
|
|
-#define RMT_CH5_ERR_INT_CLR_S 21
|
|
|
-/* RMT_CH4_ERR_INT_CLR : WT ;bitpos:[20] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$m_ERR_INT interrupt..*/
|
|
|
-#define RMT_CH4_ERR_INT_CLR (BIT(20))
|
|
|
-#define RMT_CH4_ERR_INT_CLR_M (BIT(20))
|
|
|
-#define RMT_CH4_ERR_INT_CLR_V 0x1
|
|
|
-#define RMT_CH4_ERR_INT_CLR_S 20
|
|
|
-/* RMT_CH7_RX_END_INT_CLR : WT ;bitpos:[19] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$m_RX_END_INT interrupt..*/
|
|
|
-#define RMT_CH7_RX_END_INT_CLR (BIT(19))
|
|
|
-#define RMT_CH7_RX_END_INT_CLR_M (BIT(19))
|
|
|
-#define RMT_CH7_RX_END_INT_CLR_V 0x1
|
|
|
-#define RMT_CH7_RX_END_INT_CLR_S 19
|
|
|
-/* RMT_CH6_RX_END_INT_CLR : WT ;bitpos:[18] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$m_RX_END_INT interrupt..*/
|
|
|
-#define RMT_CH6_RX_END_INT_CLR (BIT(18))
|
|
|
-#define RMT_CH6_RX_END_INT_CLR_M (BIT(18))
|
|
|
-#define RMT_CH6_RX_END_INT_CLR_V 0x1
|
|
|
-#define RMT_CH6_RX_END_INT_CLR_S 18
|
|
|
-/* RMT_CH5_RX_END_INT_CLR : WT ;bitpos:[17] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$m_RX_END_INT interrupt..*/
|
|
|
-#define RMT_CH5_RX_END_INT_CLR (BIT(17))
|
|
|
-#define RMT_CH5_RX_END_INT_CLR_M (BIT(17))
|
|
|
-#define RMT_CH5_RX_END_INT_CLR_V 0x1
|
|
|
-#define RMT_CH5_RX_END_INT_CLR_S 17
|
|
|
-/* RMT_CH4_RX_END_INT_CLR : WT ;bitpos:[16] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$m_RX_END_INT interrupt..*/
|
|
|
-#define RMT_CH4_RX_END_INT_CLR (BIT(16))
|
|
|
-#define RMT_CH4_RX_END_INT_CLR_M (BIT(16))
|
|
|
-#define RMT_CH4_RX_END_INT_CLR_V 0x1
|
|
|
-#define RMT_CH4_RX_END_INT_CLR_S 16
|
|
|
-/* RMT_CH3_TX_LOOP_INT_CLR : WT ;bitpos:[15] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_TX_LOOP_INT interrupt..*/
|
|
|
-#define RMT_CH3_TX_LOOP_INT_CLR (BIT(15))
|
|
|
-#define RMT_CH3_TX_LOOP_INT_CLR_M (BIT(15))
|
|
|
-#define RMT_CH3_TX_LOOP_INT_CLR_V 0x1
|
|
|
-#define RMT_CH3_TX_LOOP_INT_CLR_S 15
|
|
|
-/* RMT_CH2_TX_LOOP_INT_CLR : WT ;bitpos:[14] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_TX_LOOP_INT interrupt..*/
|
|
|
-#define RMT_CH2_TX_LOOP_INT_CLR (BIT(14))
|
|
|
-#define RMT_CH2_TX_LOOP_INT_CLR_M (BIT(14))
|
|
|
-#define RMT_CH2_TX_LOOP_INT_CLR_V 0x1
|
|
|
-#define RMT_CH2_TX_LOOP_INT_CLR_S 14
|
|
|
-/* RMT_CH1_TX_LOOP_INT_CLR : WT ;bitpos:[13] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_TX_LOOP_INT interrupt..*/
|
|
|
-#define RMT_CH1_TX_LOOP_INT_CLR (BIT(13))
|
|
|
-#define RMT_CH1_TX_LOOP_INT_CLR_M (BIT(13))
|
|
|
-#define RMT_CH1_TX_LOOP_INT_CLR_V 0x1
|
|
|
-#define RMT_CH1_TX_LOOP_INT_CLR_S 13
|
|
|
-/* RMT_CH0_TX_LOOP_INT_CLR : WT ;bitpos:[12] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_TX_LOOP_INT interrupt..*/
|
|
|
-#define RMT_CH0_TX_LOOP_INT_CLR (BIT(12))
|
|
|
-#define RMT_CH0_TX_LOOP_INT_CLR_M (BIT(12))
|
|
|
-#define RMT_CH0_TX_LOOP_INT_CLR_V 0x1
|
|
|
-#define RMT_CH0_TX_LOOP_INT_CLR_S 12
|
|
|
-/* RMT_CH3_TX_THR_EVENT_INT_CLR : WT ;bitpos:[11] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_TX_THR_EVENT_INT interrupt..*/
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_CLR (BIT(11))
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_CLR_M (BIT(11))
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_CLR_V 0x1
|
|
|
-#define RMT_CH3_TX_THR_EVENT_INT_CLR_S 11
|
|
|
-/* RMT_CH2_TX_THR_EVENT_INT_CLR : WT ;bitpos:[10] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_TX_THR_EVENT_INT interrupt..*/
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_CLR (BIT(10))
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_CLR_M (BIT(10))
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_CLR_V 0x1
|
|
|
-#define RMT_CH2_TX_THR_EVENT_INT_CLR_S 10
|
|
|
-/* RMT_CH1_TX_THR_EVENT_INT_CLR : WT ;bitpos:[9] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_TX_THR_EVENT_INT interrupt..*/
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_CLR (BIT(9))
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_CLR_M (BIT(9))
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_CLR_V 0x1
|
|
|
-#define RMT_CH1_TX_THR_EVENT_INT_CLR_S 9
|
|
|
-/* RMT_CH0_TX_THR_EVENT_INT_CLR : WT ;bitpos:[8] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_TX_THR_EVENT_INT interrupt..*/
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_CLR (BIT(8))
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_CLR_M (BIT(8))
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_CLR_V 0x1
|
|
|
-#define RMT_CH0_TX_THR_EVENT_INT_CLR_S 8
|
|
|
-/* RMT_CH3_ERR_INT_CLR : WT ;bitpos:[7] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_ERR_INT interrupt..*/
|
|
|
-#define RMT_CH3_ERR_INT_CLR (BIT(7))
|
|
|
-#define RMT_CH3_ERR_INT_CLR_M (BIT(7))
|
|
|
-#define RMT_CH3_ERR_INT_CLR_V 0x1
|
|
|
-#define RMT_CH3_ERR_INT_CLR_S 7
|
|
|
-/* RMT_CH2_ERR_INT_CLR : WT ;bitpos:[6] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_ERR_INT interrupt..*/
|
|
|
-#define RMT_CH2_ERR_INT_CLR (BIT(6))
|
|
|
-#define RMT_CH2_ERR_INT_CLR_M (BIT(6))
|
|
|
-#define RMT_CH2_ERR_INT_CLR_V 0x1
|
|
|
-#define RMT_CH2_ERR_INT_CLR_S 6
|
|
|
-/* RMT_CH1_ERR_INT_CLR : WT ;bitpos:[5] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_ERR_INT interrupt..*/
|
|
|
-#define RMT_CH1_ERR_INT_CLR (BIT(5))
|
|
|
-#define RMT_CH1_ERR_INT_CLR_M (BIT(5))
|
|
|
-#define RMT_CH1_ERR_INT_CLR_V 0x1
|
|
|
-#define RMT_CH1_ERR_INT_CLR_S 5
|
|
|
-/* RMT_CH0_ERR_INT_CLR : WT ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_ERR_INT interrupt..*/
|
|
|
-#define RMT_CH0_ERR_INT_CLR (BIT(4))
|
|
|
-#define RMT_CH0_ERR_INT_CLR_M (BIT(4))
|
|
|
-#define RMT_CH0_ERR_INT_CLR_V 0x1
|
|
|
-#define RMT_CH0_ERR_INT_CLR_S 4
|
|
|
-/* RMT_CH3_TX_END_INT_CLR : WT ;bitpos:[3] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_TX_END_INT interrupt..*/
|
|
|
-#define RMT_CH3_TX_END_INT_CLR (BIT(3))
|
|
|
-#define RMT_CH3_TX_END_INT_CLR_M (BIT(3))
|
|
|
-#define RMT_CH3_TX_END_INT_CLR_V 0x1
|
|
|
-#define RMT_CH3_TX_END_INT_CLR_S 3
|
|
|
-/* RMT_CH2_TX_END_INT_CLR : WT ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_TX_END_INT interrupt..*/
|
|
|
-#define RMT_CH2_TX_END_INT_CLR (BIT(2))
|
|
|
-#define RMT_CH2_TX_END_INT_CLR_M (BIT(2))
|
|
|
-#define RMT_CH2_TX_END_INT_CLR_V 0x1
|
|
|
-#define RMT_CH2_TX_END_INT_CLR_S 2
|
|
|
-/* RMT_CH1_TX_END_INT_CLR : WT ;bitpos:[1] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_TX_END_INT interrupt..*/
|
|
|
-#define RMT_CH1_TX_END_INT_CLR (BIT(1))
|
|
|
-#define RMT_CH1_TX_END_INT_CLR_M (BIT(1))
|
|
|
-#define RMT_CH1_TX_END_INT_CLR_V 0x1
|
|
|
-#define RMT_CH1_TX_END_INT_CLR_S 1
|
|
|
-/* RMT_CH0_TX_END_INT_CLR : WT ;bitpos:[0] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to clear theCH$n_TX_END_INT interrupt..*/
|
|
|
+/** RMT_INT_CLR_REG register
|
|
|
+ * Interrupt clear bits
|
|
|
+ */
|
|
|
+#define RMT_INT_CLR_REG (DR_REG_RMT_BASE + 0x7c)
|
|
|
+/** RMT_CH0_TX_END_INT_CLR : WT; bitpos: [0]; default: 0;
|
|
|
+ * Set this bit to clear theCH0_TX_END_INT interrupt.
|
|
|
+ */
|
|
|
#define RMT_CH0_TX_END_INT_CLR (BIT(0))
|
|
|
-#define RMT_CH0_TX_END_INT_CLR_M (BIT(0))
|
|
|
-#define RMT_CH0_TX_END_INT_CLR_V 0x1
|
|
|
+#define RMT_CH0_TX_END_INT_CLR_M (RMT_CH0_TX_END_INT_CLR_V << RMT_CH0_TX_END_INT_CLR_S)
|
|
|
+#define RMT_CH0_TX_END_INT_CLR_V 0x00000001U
|
|
|
#define RMT_CH0_TX_END_INT_CLR_S 0
|
|
|
+/** RMT_CH1_TX_END_INT_CLR : WT; bitpos: [1]; default: 0;
|
|
|
+ * Set this bit to clear theCH1_TX_END_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH1_TX_END_INT_CLR (BIT(1))
|
|
|
+#define RMT_CH1_TX_END_INT_CLR_M (RMT_CH1_TX_END_INT_CLR_V << RMT_CH1_TX_END_INT_CLR_S)
|
|
|
+#define RMT_CH1_TX_END_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH1_TX_END_INT_CLR_S 1
|
|
|
+/** RMT_CH2_TX_END_INT_CLR : WT; bitpos: [2]; default: 0;
|
|
|
+ * Set this bit to clear theCH2_TX_END_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH2_TX_END_INT_CLR (BIT(2))
|
|
|
+#define RMT_CH2_TX_END_INT_CLR_M (RMT_CH2_TX_END_INT_CLR_V << RMT_CH2_TX_END_INT_CLR_S)
|
|
|
+#define RMT_CH2_TX_END_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH2_TX_END_INT_CLR_S 2
|
|
|
+/** RMT_CH3_TX_END_INT_CLR : WT; bitpos: [3]; default: 0;
|
|
|
+ * Set this bit to clear theCH3_TX_END_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH3_TX_END_INT_CLR (BIT(3))
|
|
|
+#define RMT_CH3_TX_END_INT_CLR_M (RMT_CH3_TX_END_INT_CLR_V << RMT_CH3_TX_END_INT_CLR_S)
|
|
|
+#define RMT_CH3_TX_END_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH3_TX_END_INT_CLR_S 3
|
|
|
+/** RMT_CH0_ERR_INT_CLR : WT; bitpos: [4]; default: 0;
|
|
|
+ * Set this bit to clear theCH0_ERR_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH0_ERR_INT_CLR (BIT(4))
|
|
|
+#define RMT_CH0_ERR_INT_CLR_M (RMT_CH0_ERR_INT_CLR_V << RMT_CH0_ERR_INT_CLR_S)
|
|
|
+#define RMT_CH0_ERR_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH0_ERR_INT_CLR_S 4
|
|
|
+/** RMT_CH1_ERR_INT_CLR : WT; bitpos: [5]; default: 0;
|
|
|
+ * Set this bit to clear theCH1_ERR_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH1_ERR_INT_CLR (BIT(5))
|
|
|
+#define RMT_CH1_ERR_INT_CLR_M (RMT_CH1_ERR_INT_CLR_V << RMT_CH1_ERR_INT_CLR_S)
|
|
|
+#define RMT_CH1_ERR_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH1_ERR_INT_CLR_S 5
|
|
|
+/** RMT_CH2_ERR_INT_CLR : WT; bitpos: [6]; default: 0;
|
|
|
+ * Set this bit to clear theCH2_ERR_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH2_ERR_INT_CLR (BIT(6))
|
|
|
+#define RMT_CH2_ERR_INT_CLR_M (RMT_CH2_ERR_INT_CLR_V << RMT_CH2_ERR_INT_CLR_S)
|
|
|
+#define RMT_CH2_ERR_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH2_ERR_INT_CLR_S 6
|
|
|
+/** RMT_CH3_ERR_INT_CLR : WT; bitpos: [7]; default: 0;
|
|
|
+ * Set this bit to clear theCH3_ERR_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH3_ERR_INT_CLR (BIT(7))
|
|
|
+#define RMT_CH3_ERR_INT_CLR_M (RMT_CH3_ERR_INT_CLR_V << RMT_CH3_ERR_INT_CLR_S)
|
|
|
+#define RMT_CH3_ERR_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH3_ERR_INT_CLR_S 7
|
|
|
+/** RMT_CH0_TX_THR_EVENT_INT_CLR : WT; bitpos: [8]; default: 0;
|
|
|
+ * Set this bit to clear theCH0_TX_THR_EVENT_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_CLR (BIT(8))
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_CLR_M (RMT_CH0_TX_THR_EVENT_INT_CLR_V << RMT_CH0_TX_THR_EVENT_INT_CLR_S)
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH0_TX_THR_EVENT_INT_CLR_S 8
|
|
|
+/** RMT_CH1_TX_THR_EVENT_INT_CLR : WT; bitpos: [9]; default: 0;
|
|
|
+ * Set this bit to clear theCH1_TX_THR_EVENT_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_CLR (BIT(9))
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_CLR_M (RMT_CH1_TX_THR_EVENT_INT_CLR_V << RMT_CH1_TX_THR_EVENT_INT_CLR_S)
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH1_TX_THR_EVENT_INT_CLR_S 9
|
|
|
+/** RMT_CH2_TX_THR_EVENT_INT_CLR : WT; bitpos: [10]; default: 0;
|
|
|
+ * Set this bit to clear theCH2_TX_THR_EVENT_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_CLR (BIT(10))
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_CLR_M (RMT_CH2_TX_THR_EVENT_INT_CLR_V << RMT_CH2_TX_THR_EVENT_INT_CLR_S)
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH2_TX_THR_EVENT_INT_CLR_S 10
|
|
|
+/** RMT_CH3_TX_THR_EVENT_INT_CLR : WT; bitpos: [11]; default: 0;
|
|
|
+ * Set this bit to clear theCH3_TX_THR_EVENT_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_CLR (BIT(11))
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_CLR_M (RMT_CH3_TX_THR_EVENT_INT_CLR_V << RMT_CH3_TX_THR_EVENT_INT_CLR_S)
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH3_TX_THR_EVENT_INT_CLR_S 11
|
|
|
+/** RMT_CH0_TX_LOOP_INT_CLR : WT; bitpos: [12]; default: 0;
|
|
|
+ * Set this bit to clear theCH0_TX_LOOP_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH0_TX_LOOP_INT_CLR (BIT(12))
|
|
|
+#define RMT_CH0_TX_LOOP_INT_CLR_M (RMT_CH0_TX_LOOP_INT_CLR_V << RMT_CH0_TX_LOOP_INT_CLR_S)
|
|
|
+#define RMT_CH0_TX_LOOP_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH0_TX_LOOP_INT_CLR_S 12
|
|
|
+/** RMT_CH1_TX_LOOP_INT_CLR : WT; bitpos: [13]; default: 0;
|
|
|
+ * Set this bit to clear theCH1_TX_LOOP_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH1_TX_LOOP_INT_CLR (BIT(13))
|
|
|
+#define RMT_CH1_TX_LOOP_INT_CLR_M (RMT_CH1_TX_LOOP_INT_CLR_V << RMT_CH1_TX_LOOP_INT_CLR_S)
|
|
|
+#define RMT_CH1_TX_LOOP_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH1_TX_LOOP_INT_CLR_S 13
|
|
|
+/** RMT_CH2_TX_LOOP_INT_CLR : WT; bitpos: [14]; default: 0;
|
|
|
+ * Set this bit to clear theCH2_TX_LOOP_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH2_TX_LOOP_INT_CLR (BIT(14))
|
|
|
+#define RMT_CH2_TX_LOOP_INT_CLR_M (RMT_CH2_TX_LOOP_INT_CLR_V << RMT_CH2_TX_LOOP_INT_CLR_S)
|
|
|
+#define RMT_CH2_TX_LOOP_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH2_TX_LOOP_INT_CLR_S 14
|
|
|
+/** RMT_CH3_TX_LOOP_INT_CLR : WT; bitpos: [15]; default: 0;
|
|
|
+ * Set this bit to clear theCH3_TX_LOOP_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH3_TX_LOOP_INT_CLR (BIT(15))
|
|
|
+#define RMT_CH3_TX_LOOP_INT_CLR_M (RMT_CH3_TX_LOOP_INT_CLR_V << RMT_CH3_TX_LOOP_INT_CLR_S)
|
|
|
+#define RMT_CH3_TX_LOOP_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH3_TX_LOOP_INT_CLR_S 15
|
|
|
+/** RMT_CH4_RX_END_INT_CLR : WT; bitpos: [16]; default: 0;
|
|
|
+ * Set this bit to clear theCH4_RX_END_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH4_RX_END_INT_CLR (BIT(16))
|
|
|
+#define RMT_CH4_RX_END_INT_CLR_M (RMT_CH4_RX_END_INT_CLR_V << RMT_CH4_RX_END_INT_CLR_S)
|
|
|
+#define RMT_CH4_RX_END_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH4_RX_END_INT_CLR_S 16
|
|
|
+/** RMT_CH5_RX_END_INT_CLR : WT; bitpos: [17]; default: 0;
|
|
|
+ * Set this bit to clear theCH5_RX_END_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH5_RX_END_INT_CLR (BIT(17))
|
|
|
+#define RMT_CH5_RX_END_INT_CLR_M (RMT_CH5_RX_END_INT_CLR_V << RMT_CH5_RX_END_INT_CLR_S)
|
|
|
+#define RMT_CH5_RX_END_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH5_RX_END_INT_CLR_S 17
|
|
|
+/** RMT_CH6_RX_END_INT_CLR : WT; bitpos: [18]; default: 0;
|
|
|
+ * Set this bit to clear theCH6_RX_END_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH6_RX_END_INT_CLR (BIT(18))
|
|
|
+#define RMT_CH6_RX_END_INT_CLR_M (RMT_CH6_RX_END_INT_CLR_V << RMT_CH6_RX_END_INT_CLR_S)
|
|
|
+#define RMT_CH6_RX_END_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH6_RX_END_INT_CLR_S 18
|
|
|
+/** RMT_CH7_RX_END_INT_CLR : WT; bitpos: [19]; default: 0;
|
|
|
+ * Set this bit to clear theCH7_RX_END_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH7_RX_END_INT_CLR (BIT(19))
|
|
|
+#define RMT_CH7_RX_END_INT_CLR_M (RMT_CH7_RX_END_INT_CLR_V << RMT_CH7_RX_END_INT_CLR_S)
|
|
|
+#define RMT_CH7_RX_END_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH7_RX_END_INT_CLR_S 19
|
|
|
+/** RMT_CH4_ERR_INT_CLR : WT; bitpos: [20]; default: 0;
|
|
|
+ * Set this bit to clear theCH4_ERR_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH4_ERR_INT_CLR (BIT(20))
|
|
|
+#define RMT_CH4_ERR_INT_CLR_M (RMT_CH4_ERR_INT_CLR_V << RMT_CH4_ERR_INT_CLR_S)
|
|
|
+#define RMT_CH4_ERR_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH4_ERR_INT_CLR_S 20
|
|
|
+/** RMT_CH5_ERR_INT_CLR : WT; bitpos: [21]; default: 0;
|
|
|
+ * Set this bit to clear theCH5_ERR_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH5_ERR_INT_CLR (BIT(21))
|
|
|
+#define RMT_CH5_ERR_INT_CLR_M (RMT_CH5_ERR_INT_CLR_V << RMT_CH5_ERR_INT_CLR_S)
|
|
|
+#define RMT_CH5_ERR_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH5_ERR_INT_CLR_S 21
|
|
|
+/** RMT_CH6_ERR_INT_CLR : WT; bitpos: [22]; default: 0;
|
|
|
+ * Set this bit to clear theCH6_ERR_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH6_ERR_INT_CLR (BIT(22))
|
|
|
+#define RMT_CH6_ERR_INT_CLR_M (RMT_CH6_ERR_INT_CLR_V << RMT_CH6_ERR_INT_CLR_S)
|
|
|
+#define RMT_CH6_ERR_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH6_ERR_INT_CLR_S 22
|
|
|
+/** RMT_CH7_ERR_INT_CLR : WT; bitpos: [23]; default: 0;
|
|
|
+ * Set this bit to clear theCH7_ERR_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH7_ERR_INT_CLR (BIT(23))
|
|
|
+#define RMT_CH7_ERR_INT_CLR_M (RMT_CH7_ERR_INT_CLR_V << RMT_CH7_ERR_INT_CLR_S)
|
|
|
+#define RMT_CH7_ERR_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH7_ERR_INT_CLR_S 23
|
|
|
+/** RMT_CH4_RX_THR_EVENT_INT_CLR : WT; bitpos: [24]; default: 0;
|
|
|
+ * Set this bit to clear theCH4_RX_THR_EVENT_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_CLR (BIT(24))
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_CLR_M (RMT_CH4_RX_THR_EVENT_INT_CLR_V << RMT_CH4_RX_THR_EVENT_INT_CLR_S)
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH4_RX_THR_EVENT_INT_CLR_S 24
|
|
|
+/** RMT_CH5_RX_THR_EVENT_INT_CLR : WT; bitpos: [25]; default: 0;
|
|
|
+ * Set this bit to clear theCH5_RX_THR_EVENT_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_CLR (BIT(25))
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_CLR_M (RMT_CH5_RX_THR_EVENT_INT_CLR_V << RMT_CH5_RX_THR_EVENT_INT_CLR_S)
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH5_RX_THR_EVENT_INT_CLR_S 25
|
|
|
+/** RMT_CH6_RX_THR_EVENT_INT_CLR : WT; bitpos: [26]; default: 0;
|
|
|
+ * Set this bit to clear theCH6_RX_THR_EVENT_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_CLR (BIT(26))
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_CLR_M (RMT_CH6_RX_THR_EVENT_INT_CLR_V << RMT_CH6_RX_THR_EVENT_INT_CLR_S)
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH6_RX_THR_EVENT_INT_CLR_S 26
|
|
|
+/** RMT_CH7_RX_THR_EVENT_INT_CLR : WT; bitpos: [27]; default: 0;
|
|
|
+ * Set this bit to clear theCH7_RX_THR_EVENT_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_CLR (BIT(27))
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_CLR_M (RMT_CH7_RX_THR_EVENT_INT_CLR_V << RMT_CH7_RX_THR_EVENT_INT_CLR_S)
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH7_RX_THR_EVENT_INT_CLR_S 27
|
|
|
+/** RMT_CH3_DMA_ACCESS_FAIL_INT_CLR : WT; bitpos: [28]; default: 0;
|
|
|
+ * Set this bit to clear the CH3_DMA_ACCESS_FAIL_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_CLR (BIT(28))
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_CLR_M (RMT_CH3_DMA_ACCESS_FAIL_INT_CLR_V << RMT_CH3_DMA_ACCESS_FAIL_INT_CLR_S)
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH3_DMA_ACCESS_FAIL_INT_CLR_S 28
|
|
|
+/** RMT_CH7_DMA_ACCESS_FAIL_INT_CLR : WT; bitpos: [29]; default: 0;
|
|
|
+ * Set this bit to clear the CH7_DMA_ACCESS_FAIL_INT interrupt.
|
|
|
+ */
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_CLR (BIT(29))
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_CLR_M (RMT_CH7_DMA_ACCESS_FAIL_INT_CLR_V << RMT_CH7_DMA_ACCESS_FAIL_INT_CLR_S)
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_CLR_V 0x00000001U
|
|
|
+#define RMT_CH7_DMA_ACCESS_FAIL_INT_CLR_S 29
|
|
|
|
|
|
-#define RMT_CH0CARRIER_DUTY_REG (DR_REG_RMT_BASE + 0x80)
|
|
|
-/* RMT_CARRIER_HIGH_CH0 : R/W ;bitpos:[31:16] ;default: 16'h40 ; */
|
|
|
-/*description: This register is used to configure carrier wave 's high level clock period for C
|
|
|
-HANNEL$n..*/
|
|
|
-#define RMT_CARRIER_HIGH_CH0 0x0000FFFF
|
|
|
-#define RMT_CARRIER_HIGH_CH0_M ((RMT_CARRIER_HIGH_CH0_V)<<(RMT_CARRIER_HIGH_CH0_S))
|
|
|
-#define RMT_CARRIER_HIGH_CH0_V 0xFFFF
|
|
|
-#define RMT_CARRIER_HIGH_CH0_S 16
|
|
|
-/* RMT_CARRIER_LOW_CH0 : R/W ;bitpos:[15:0] ;default: 16'h40 ; */
|
|
|
-/*description: This register is used to configure carrier wave 's low level clock period for CH
|
|
|
-ANNEL$n..*/
|
|
|
-#define RMT_CARRIER_LOW_CH0 0x0000FFFF
|
|
|
-#define RMT_CARRIER_LOW_CH0_M ((RMT_CARRIER_LOW_CH0_V)<<(RMT_CARRIER_LOW_CH0_S))
|
|
|
-#define RMT_CARRIER_LOW_CH0_V 0xFFFF
|
|
|
+/** RMT_CH0CARRIER_DUTY_REG register
|
|
|
+ * Channel 0 duty cycle configuration register
|
|
|
+ */
|
|
|
+#define RMT_CH0CARRIER_DUTY_REG (DR_REG_RMT_BASE + 0x80)
|
|
|
+/** RMT_CARRIER_LOW_CH0 : R/W; bitpos: [15:0]; default: 64;
|
|
|
+ * This register is used to configure carrier wave 's low level clock period for
|
|
|
+ * CHANNEL0.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_LOW_CH0 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_LOW_CH0_M (RMT_CARRIER_LOW_CH0_V << RMT_CARRIER_LOW_CH0_S)
|
|
|
+#define RMT_CARRIER_LOW_CH0_V 0x0000FFFFU
|
|
|
#define RMT_CARRIER_LOW_CH0_S 0
|
|
|
+/** RMT_CARRIER_HIGH_CH0 : R/W; bitpos: [31:16]; default: 64;
|
|
|
+ * This register is used to configure carrier wave 's high level clock period for
|
|
|
+ * CHANNEL0.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_HIGH_CH0 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_CH0_M (RMT_CARRIER_HIGH_CH0_V << RMT_CARRIER_HIGH_CH0_S)
|
|
|
+#define RMT_CARRIER_HIGH_CH0_V 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_CH0_S 16
|
|
|
|
|
|
-#define RMT_CH1CARRIER_DUTY_REG (DR_REG_RMT_BASE + 0x84)
|
|
|
-/* RMT_CARRIER_HIGH_CH1 : R/W ;bitpos:[31:16] ;default: 16'h40 ; */
|
|
|
-/*description: This register is used to configure carrier wave 's high level clock period for C
|
|
|
-HANNEL$n..*/
|
|
|
-#define RMT_CARRIER_HIGH_CH1 0x0000FFFF
|
|
|
-#define RMT_CARRIER_HIGH_CH1_M ((RMT_CARRIER_HIGH_CH1_V)<<(RMT_CARRIER_HIGH_CH1_S))
|
|
|
-#define RMT_CARRIER_HIGH_CH1_V 0xFFFF
|
|
|
-#define RMT_CARRIER_HIGH_CH1_S 16
|
|
|
-/* RMT_CARRIER_LOW_CH1 : R/W ;bitpos:[15:0] ;default: 16'h40 ; */
|
|
|
-/*description: This register is used to configure carrier wave 's low level clock period for CH
|
|
|
-ANNEL$n..*/
|
|
|
-#define RMT_CARRIER_LOW_CH1 0x0000FFFF
|
|
|
-#define RMT_CARRIER_LOW_CH1_M ((RMT_CARRIER_LOW_CH1_V)<<(RMT_CARRIER_LOW_CH1_S))
|
|
|
-#define RMT_CARRIER_LOW_CH1_V 0xFFFF
|
|
|
+/** RMT_CH1CARRIER_DUTY_REG register
|
|
|
+ * Channel 1 duty cycle configuration register
|
|
|
+ */
|
|
|
+#define RMT_CH1CARRIER_DUTY_REG (DR_REG_RMT_BASE + 0x84)
|
|
|
+/** RMT_CARRIER_LOW_CH1 : R/W; bitpos: [15:0]; default: 64;
|
|
|
+ * This register is used to configure carrier wave 's low level clock period for
|
|
|
+ * CHANNEL1.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_LOW_CH1 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_LOW_CH1_M (RMT_CARRIER_LOW_CH1_V << RMT_CARRIER_LOW_CH1_S)
|
|
|
+#define RMT_CARRIER_LOW_CH1_V 0x0000FFFFU
|
|
|
#define RMT_CARRIER_LOW_CH1_S 0
|
|
|
+/** RMT_CARRIER_HIGH_CH1 : R/W; bitpos: [31:16]; default: 64;
|
|
|
+ * This register is used to configure carrier wave 's high level clock period for
|
|
|
+ * CHANNEL1.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_HIGH_CH1 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_CH1_M (RMT_CARRIER_HIGH_CH1_V << RMT_CARRIER_HIGH_CH1_S)
|
|
|
+#define RMT_CARRIER_HIGH_CH1_V 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_CH1_S 16
|
|
|
|
|
|
-#define RMT_CH2CARRIER_DUTY_REG (DR_REG_RMT_BASE + 0x88)
|
|
|
-/* RMT_CARRIER_HIGH_CH2 : R/W ;bitpos:[31:16] ;default: 16'h40 ; */
|
|
|
-/*description: This register is used to configure carrier wave 's high level clock period for C
|
|
|
-HANNEL$n..*/
|
|
|
-#define RMT_CARRIER_HIGH_CH2 0x0000FFFF
|
|
|
-#define RMT_CARRIER_HIGH_CH2_M ((RMT_CARRIER_HIGH_CH2_V)<<(RMT_CARRIER_HIGH_CH2_S))
|
|
|
-#define RMT_CARRIER_HIGH_CH2_V 0xFFFF
|
|
|
-#define RMT_CARRIER_HIGH_CH2_S 16
|
|
|
-/* RMT_CARRIER_LOW_CH2 : R/W ;bitpos:[15:0] ;default: 16'h40 ; */
|
|
|
-/*description: This register is used to configure carrier wave 's low level clock period for CH
|
|
|
-ANNEL$n..*/
|
|
|
-#define RMT_CARRIER_LOW_CH2 0x0000FFFF
|
|
|
-#define RMT_CARRIER_LOW_CH2_M ((RMT_CARRIER_LOW_CH2_V)<<(RMT_CARRIER_LOW_CH2_S))
|
|
|
-#define RMT_CARRIER_LOW_CH2_V 0xFFFF
|
|
|
+/** RMT_CH2CARRIER_DUTY_REG register
|
|
|
+ * Channel 2 duty cycle configuration register
|
|
|
+ */
|
|
|
+#define RMT_CH2CARRIER_DUTY_REG (DR_REG_RMT_BASE + 0x88)
|
|
|
+/** RMT_CARRIER_LOW_CH2 : R/W; bitpos: [15:0]; default: 64;
|
|
|
+ * This register is used to configure carrier wave 's low level clock period for
|
|
|
+ * CHANNEL2.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_LOW_CH2 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_LOW_CH2_M (RMT_CARRIER_LOW_CH2_V << RMT_CARRIER_LOW_CH2_S)
|
|
|
+#define RMT_CARRIER_LOW_CH2_V 0x0000FFFFU
|
|
|
#define RMT_CARRIER_LOW_CH2_S 0
|
|
|
+/** RMT_CARRIER_HIGH_CH2 : R/W; bitpos: [31:16]; default: 64;
|
|
|
+ * This register is used to configure carrier wave 's high level clock period for
|
|
|
+ * CHANNEL2.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_HIGH_CH2 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_CH2_M (RMT_CARRIER_HIGH_CH2_V << RMT_CARRIER_HIGH_CH2_S)
|
|
|
+#define RMT_CARRIER_HIGH_CH2_V 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_CH2_S 16
|
|
|
|
|
|
-#define RMT_CH3CARRIER_DUTY_REG (DR_REG_RMT_BASE + 0x8C)
|
|
|
-/* RMT_CARRIER_HIGH_CH3 : R/W ;bitpos:[31:16] ;default: 16'h40 ; */
|
|
|
-/*description: This register is used to configure carrier wave 's high level clock period for C
|
|
|
-HANNEL$n..*/
|
|
|
-#define RMT_CARRIER_HIGH_CH3 0x0000FFFF
|
|
|
-#define RMT_CARRIER_HIGH_CH3_M ((RMT_CARRIER_HIGH_CH3_V)<<(RMT_CARRIER_HIGH_CH3_S))
|
|
|
-#define RMT_CARRIER_HIGH_CH3_V 0xFFFF
|
|
|
-#define RMT_CARRIER_HIGH_CH3_S 16
|
|
|
-/* RMT_CARRIER_LOW_CH3 : R/W ;bitpos:[15:0] ;default: 16'h40 ; */
|
|
|
-/*description: This register is used to configure carrier wave 's low level clock period for CH
|
|
|
-ANNEL$n..*/
|
|
|
-#define RMT_CARRIER_LOW_CH3 0x0000FFFF
|
|
|
-#define RMT_CARRIER_LOW_CH3_M ((RMT_CARRIER_LOW_CH3_V)<<(RMT_CARRIER_LOW_CH3_S))
|
|
|
-#define RMT_CARRIER_LOW_CH3_V 0xFFFF
|
|
|
+/** RMT_CH3CARRIER_DUTY_REG register
|
|
|
+ * Channel 3 duty cycle configuration register
|
|
|
+ */
|
|
|
+#define RMT_CH3CARRIER_DUTY_REG (DR_REG_RMT_BASE + 0x8c)
|
|
|
+/** RMT_CARRIER_LOW_CH3 : R/W; bitpos: [15:0]; default: 64;
|
|
|
+ * This register is used to configure carrier wave 's low level clock period for
|
|
|
+ * CHANNEL3.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_LOW_CH3 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_LOW_CH3_M (RMT_CARRIER_LOW_CH3_V << RMT_CARRIER_LOW_CH3_S)
|
|
|
+#define RMT_CARRIER_LOW_CH3_V 0x0000FFFFU
|
|
|
#define RMT_CARRIER_LOW_CH3_S 0
|
|
|
+/** RMT_CARRIER_HIGH_CH3 : R/W; bitpos: [31:16]; default: 64;
|
|
|
+ * This register is used to configure carrier wave 's high level clock period for
|
|
|
+ * CHANNEL3.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_HIGH_CH3 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_CH3_M (RMT_CARRIER_HIGH_CH3_V << RMT_CARRIER_HIGH_CH3_S)
|
|
|
+#define RMT_CARRIER_HIGH_CH3_V 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_CH3_S 16
|
|
|
|
|
|
-#define RMT_CH4_RX_CARRIER_RM_REG (DR_REG_RMT_BASE + 0x90)
|
|
|
-/* RMT_CARRIER_HIGH_THRES_CH4 : R/W ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
|
-/*description: The high level period in a carrier modulation mode is (REG_RMT_REG_CARRIER_HIGH_
|
|
|
-THRES_CH$m + 1) for channel $m..*/
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH4 0x0000FFFF
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH4_M ((RMT_CARRIER_HIGH_THRES_CH4_V)<<(RMT_CARRIER_HIGH_THRES_CH4_S))
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH4_V 0xFFFF
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH4_S 16
|
|
|
-/* RMT_CARRIER_LOW_THRES_CH4 : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
|
-/*description: The low level period in a carrier modulation mode is (REG_RMT_REG_CARRIER_LOW_TH
|
|
|
-RES_CH$m + 1) for channel $m..*/
|
|
|
-#define RMT_CARRIER_LOW_THRES_CH4 0x0000FFFF
|
|
|
-#define RMT_CARRIER_LOW_THRES_CH4_M ((RMT_CARRIER_LOW_THRES_CH4_V)<<(RMT_CARRIER_LOW_THRES_CH4_S))
|
|
|
-#define RMT_CARRIER_LOW_THRES_CH4_V 0xFFFF
|
|
|
+/** RMT_CH4_RX_CARRIER_RM_REG register
|
|
|
+ * Channel 4 carrier remove register
|
|
|
+ */
|
|
|
+#define RMT_CH4_RX_CARRIER_RM_REG (DR_REG_RMT_BASE + 0x90)
|
|
|
+/** RMT_CARRIER_LOW_THRES_CH4 : R/W; bitpos: [15:0]; default: 0;
|
|
|
+ * The low level period in a carrier modulation mode is
|
|
|
+ * (REG_RMT_REG_CARRIER_LOW_THRES_CH4 + 1) for channel 4.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_LOW_THRES_CH4 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_LOW_THRES_CH4_M (RMT_CARRIER_LOW_THRES_CH4_V << RMT_CARRIER_LOW_THRES_CH4_S)
|
|
|
+#define RMT_CARRIER_LOW_THRES_CH4_V 0x0000FFFFU
|
|
|
#define RMT_CARRIER_LOW_THRES_CH4_S 0
|
|
|
+/** RMT_CARRIER_HIGH_THRES_CH4 : R/W; bitpos: [31:16]; default: 0;
|
|
|
+ * The high level period in a carrier modulation mode is
|
|
|
+ * (REG_RMT_REG_CARRIER_HIGH_THRES_CH4 + 1) for channel 4.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH4 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH4_M (RMT_CARRIER_HIGH_THRES_CH4_V << RMT_CARRIER_HIGH_THRES_CH4_S)
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH4_V 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH4_S 16
|
|
|
|
|
|
-#define RMT_CH5_RX_CARRIER_RM_REG (DR_REG_RMT_BASE + 0x94)
|
|
|
-/* RMT_CARRIER_HIGH_THRES_CH5 : R/W ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
|
-/*description: The high level period in a carrier modulation mode is (REG_RMT_REG_CARRIER_HIGH_
|
|
|
-THRES_CH$m + 1) for channel $m..*/
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH5 0x0000FFFF
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH5_M ((RMT_CARRIER_HIGH_THRES_CH5_V)<<(RMT_CARRIER_HIGH_THRES_CH5_S))
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH5_V 0xFFFF
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH5_S 16
|
|
|
-/* RMT_CARRIER_LOW_THRES_CH5 : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
|
-/*description: The low level period in a carrier modulation mode is (REG_RMT_REG_CARRIER_LOW_TH
|
|
|
-RES_CH$m + 1) for channel $m..*/
|
|
|
-#define RMT_CARRIER_LOW_THRES_CH5 0x0000FFFF
|
|
|
-#define RMT_CARRIER_LOW_THRES_CH5_M ((RMT_CARRIER_LOW_THRES_CH5_V)<<(RMT_CARRIER_LOW_THRES_CH5_S))
|
|
|
-#define RMT_CARRIER_LOW_THRES_CH5_V 0xFFFF
|
|
|
+/** RMT_CH5_RX_CARRIER_RM_REG register
|
|
|
+ * Channel 5 carrier remove register
|
|
|
+ */
|
|
|
+#define RMT_CH5_RX_CARRIER_RM_REG (DR_REG_RMT_BASE + 0x94)
|
|
|
+/** RMT_CARRIER_LOW_THRES_CH5 : R/W; bitpos: [15:0]; default: 0;
|
|
|
+ * The low level period in a carrier modulation mode is
|
|
|
+ * (REG_RMT_REG_CARRIER_LOW_THRES_CH5 + 1) for channel 5.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_LOW_THRES_CH5 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_LOW_THRES_CH5_M (RMT_CARRIER_LOW_THRES_CH5_V << RMT_CARRIER_LOW_THRES_CH5_S)
|
|
|
+#define RMT_CARRIER_LOW_THRES_CH5_V 0x0000FFFFU
|
|
|
#define RMT_CARRIER_LOW_THRES_CH5_S 0
|
|
|
+/** RMT_CARRIER_HIGH_THRES_CH5 : R/W; bitpos: [31:16]; default: 0;
|
|
|
+ * The high level period in a carrier modulation mode is
|
|
|
+ * (REG_RMT_REG_CARRIER_HIGH_THRES_CH5 + 1) for channel 5.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH5 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH5_M (RMT_CARRIER_HIGH_THRES_CH5_V << RMT_CARRIER_HIGH_THRES_CH5_S)
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH5_V 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH5_S 16
|
|
|
|
|
|
-#define RMT_CH6_RX_CARRIER_RM_REG (DR_REG_RMT_BASE + 0x98)
|
|
|
-/* RMT_CARRIER_HIGH_THRES_CH6 : R/W ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
|
-/*description: The high level period in a carrier modulation mode is (REG_RMT_REG_CARRIER_HIGH_
|
|
|
-THRES_CH$m + 1) for channel $m..*/
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH6 0x0000FFFF
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH6_M ((RMT_CARRIER_HIGH_THRES_CH6_V)<<(RMT_CARRIER_HIGH_THRES_CH6_S))
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH6_V 0xFFFF
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH6_S 16
|
|
|
-/* RMT_CARRIER_LOW_THRES_CH6 : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
|
-/*description: The low level period in a carrier modulation mode is (REG_RMT_REG_CARRIER_LOW_TH
|
|
|
-RES_CH$m + 1) for channel $m..*/
|
|
|
-#define RMT_CARRIER_LOW_THRES_CH6 0x0000FFFF
|
|
|
-#define RMT_CARRIER_LOW_THRES_CH6_M ((RMT_CARRIER_LOW_THRES_CH6_V)<<(RMT_CARRIER_LOW_THRES_CH6_S))
|
|
|
-#define RMT_CARRIER_LOW_THRES_CH6_V 0xFFFF
|
|
|
+/** RMT_CH6_RX_CARRIER_RM_REG register
|
|
|
+ * Channel 6 carrier remove register
|
|
|
+ */
|
|
|
+#define RMT_CH6_RX_CARRIER_RM_REG (DR_REG_RMT_BASE + 0x98)
|
|
|
+/** RMT_CARRIER_LOW_THRES_CH6 : R/W; bitpos: [15:0]; default: 0;
|
|
|
+ * The low level period in a carrier modulation mode is
|
|
|
+ * (REG_RMT_REG_CARRIER_LOW_THRES_CH6 + 1) for channel 6.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_LOW_THRES_CH6 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_LOW_THRES_CH6_M (RMT_CARRIER_LOW_THRES_CH6_V << RMT_CARRIER_LOW_THRES_CH6_S)
|
|
|
+#define RMT_CARRIER_LOW_THRES_CH6_V 0x0000FFFFU
|
|
|
#define RMT_CARRIER_LOW_THRES_CH6_S 0
|
|
|
+/** RMT_CARRIER_HIGH_THRES_CH6 : R/W; bitpos: [31:16]; default: 0;
|
|
|
+ * The high level period in a carrier modulation mode is
|
|
|
+ * (REG_RMT_REG_CARRIER_HIGH_THRES_CH6 + 1) for channel 6.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH6 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH6_M (RMT_CARRIER_HIGH_THRES_CH6_V << RMT_CARRIER_HIGH_THRES_CH6_S)
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH6_V 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH6_S 16
|
|
|
|
|
|
-#define RMT_CH7_RX_CARRIER_RM_REG (DR_REG_RMT_BASE + 0x9C)
|
|
|
-/* RMT_CARRIER_HIGH_THRES_CH7 : R/W ;bitpos:[31:16] ;default: 16'h0 ; */
|
|
|
-/*description: The high level period in a carrier modulation mode is (REG_RMT_REG_CARRIER_HIGH_
|
|
|
-THRES_CH$m + 1) for channel $m..*/
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH7 0x0000FFFF
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH7_M ((RMT_CARRIER_HIGH_THRES_CH7_V)<<(RMT_CARRIER_HIGH_THRES_CH7_S))
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH7_V 0xFFFF
|
|
|
-#define RMT_CARRIER_HIGH_THRES_CH7_S 16
|
|
|
-/* RMT_CARRIER_LOW_THRES_CH7 : R/W ;bitpos:[15:0] ;default: 16'h0 ; */
|
|
|
-/*description: The low level period in a carrier modulation mode is (REG_RMT_REG_CARRIER_LOW_TH
|
|
|
-RES_CH$m + 1) for channel $m..*/
|
|
|
-#define RMT_CARRIER_LOW_THRES_CH7 0x0000FFFF
|
|
|
-#define RMT_CARRIER_LOW_THRES_CH7_M ((RMT_CARRIER_LOW_THRES_CH7_V)<<(RMT_CARRIER_LOW_THRES_CH7_S))
|
|
|
-#define RMT_CARRIER_LOW_THRES_CH7_V 0xFFFF
|
|
|
+/** RMT_CH7_RX_CARRIER_RM_REG register
|
|
|
+ * Channel 7 carrier remove register
|
|
|
+ */
|
|
|
+#define RMT_CH7_RX_CARRIER_RM_REG (DR_REG_RMT_BASE + 0x9c)
|
|
|
+/** RMT_CARRIER_LOW_THRES_CH7 : R/W; bitpos: [15:0]; default: 0;
|
|
|
+ * The low level period in a carrier modulation mode is
|
|
|
+ * (REG_RMT_REG_CARRIER_LOW_THRES_CH7 + 1) for channel 7.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_LOW_THRES_CH7 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_LOW_THRES_CH7_M (RMT_CARRIER_LOW_THRES_CH7_V << RMT_CARRIER_LOW_THRES_CH7_S)
|
|
|
+#define RMT_CARRIER_LOW_THRES_CH7_V 0x0000FFFFU
|
|
|
#define RMT_CARRIER_LOW_THRES_CH7_S 0
|
|
|
+/** RMT_CARRIER_HIGH_THRES_CH7 : R/W; bitpos: [31:16]; default: 0;
|
|
|
+ * The high level period in a carrier modulation mode is
|
|
|
+ * (REG_RMT_REG_CARRIER_HIGH_THRES_CH7 + 1) for channel 7.
|
|
|
+ */
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH7 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH7_M (RMT_CARRIER_HIGH_THRES_CH7_V << RMT_CARRIER_HIGH_THRES_CH7_S)
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH7_V 0x0000FFFFU
|
|
|
+#define RMT_CARRIER_HIGH_THRES_CH7_S 16
|
|
|
|
|
|
-#define RMT_CH0_TX_LIM_REG (DR_REG_RMT_BASE + 0xA0)
|
|
|
-/* RMT_LOOP_STOP_EN_CH0 : R/W ;bitpos:[21] ;default: 1'b0 ; */
|
|
|
-/*description: This bit is used to enable the loop send stop function after the loop counter co
|
|
|
-unts to loop number for CHANNEL$n..*/
|
|
|
-#define RMT_LOOP_STOP_EN_CH0 (BIT(21))
|
|
|
-#define RMT_LOOP_STOP_EN_CH0_M (BIT(21))
|
|
|
-#define RMT_LOOP_STOP_EN_CH0_V 0x1
|
|
|
-#define RMT_LOOP_STOP_EN_CH0_S 21
|
|
|
-/* RMT_LOOP_COUNT_RESET_CH0 : WT ;bitpos:[20] ;default: 1'b0 ; */
|
|
|
-/*description: This register is used to reset the loop count when tx_conti_mode is valid..*/
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH0 (BIT(20))
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH0_M (BIT(20))
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH0_V 0x1
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH0_S 20
|
|
|
-/* RMT_TX_LOOP_CNT_EN_CH0 : R/W ;bitpos:[19] ;default: 1'b0 ; */
|
|
|
-/*description: This register is the enabled bit for loop count..*/
|
|
|
+/** RMT_CH0_TX_LIM_REG register
|
|
|
+ * Channel 0 Tx event configuration register
|
|
|
+ */
|
|
|
+#define RMT_CH0_TX_LIM_REG (DR_REG_RMT_BASE + 0xa0)
|
|
|
+/** RMT_TX_LIM_CH0 : R/W; bitpos: [8:0]; default: 128;
|
|
|
+ * This register is used to configure the maximum entries that CHANNEL0 can send out.
|
|
|
+ */
|
|
|
+#define RMT_TX_LIM_CH0 0x000001FFU
|
|
|
+#define RMT_TX_LIM_CH0_M (RMT_TX_LIM_CH0_V << RMT_TX_LIM_CH0_S)
|
|
|
+#define RMT_TX_LIM_CH0_V 0x000001FFU
|
|
|
+#define RMT_TX_LIM_CH0_S 0
|
|
|
+/** RMT_TX_LOOP_NUM_CH0 : R/W; bitpos: [18:9]; default: 0;
|
|
|
+ * This register is used to configure the maximum loop count when tx_conti_mode is
|
|
|
+ * valid.
|
|
|
+ */
|
|
|
+#define RMT_TX_LOOP_NUM_CH0 0x000003FFU
|
|
|
+#define RMT_TX_LOOP_NUM_CH0_M (RMT_TX_LOOP_NUM_CH0_V << RMT_TX_LOOP_NUM_CH0_S)
|
|
|
+#define RMT_TX_LOOP_NUM_CH0_V 0x000003FFU
|
|
|
+#define RMT_TX_LOOP_NUM_CH0_S 9
|
|
|
+/** RMT_TX_LOOP_CNT_EN_CH0 : R/W; bitpos: [19]; default: 0;
|
|
|
+ * This register is the enabled bit for loop count.
|
|
|
+ */
|
|
|
#define RMT_TX_LOOP_CNT_EN_CH0 (BIT(19))
|
|
|
-#define RMT_TX_LOOP_CNT_EN_CH0_M (BIT(19))
|
|
|
-#define RMT_TX_LOOP_CNT_EN_CH0_V 0x1
|
|
|
+#define RMT_TX_LOOP_CNT_EN_CH0_M (RMT_TX_LOOP_CNT_EN_CH0_V << RMT_TX_LOOP_CNT_EN_CH0_S)
|
|
|
+#define RMT_TX_LOOP_CNT_EN_CH0_V 0x00000001U
|
|
|
#define RMT_TX_LOOP_CNT_EN_CH0_S 19
|
|
|
-/* RMT_TX_LOOP_NUM_CH0 : R/W ;bitpos:[18:9] ;default: 10'b0 ; */
|
|
|
-/*description: This register is used to configure the maximum loop count when tx_conti_mode is
|
|
|
-valid..*/
|
|
|
-#define RMT_TX_LOOP_NUM_CH0 0x000003FF
|
|
|
-#define RMT_TX_LOOP_NUM_CH0_M ((RMT_TX_LOOP_NUM_CH0_V)<<(RMT_TX_LOOP_NUM_CH0_S))
|
|
|
-#define RMT_TX_LOOP_NUM_CH0_V 0x3FF
|
|
|
-#define RMT_TX_LOOP_NUM_CH0_S 9
|
|
|
-/* RMT_TX_LIM_CH0 : R/W ;bitpos:[8:0] ;default: 9'h80 ; */
|
|
|
-/*description: This register is used to configure the maximum entries that CHANNEL$n can send o
|
|
|
-ut..*/
|
|
|
-#define RMT_TX_LIM_CH0 0x000001FF
|
|
|
-#define RMT_TX_LIM_CH0_M ((RMT_TX_LIM_CH0_V)<<(RMT_TX_LIM_CH0_S))
|
|
|
-#define RMT_TX_LIM_CH0_V 0x1FF
|
|
|
-#define RMT_TX_LIM_CH0_S 0
|
|
|
+/** RMT_LOOP_COUNT_RESET_CH0 : WT; bitpos: [20]; default: 0;
|
|
|
+ * This register is used to reset the loop count when tx_conti_mode is valid.
|
|
|
+ */
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH0 (BIT(20))
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH0_M (RMT_LOOP_COUNT_RESET_CH0_V << RMT_LOOP_COUNT_RESET_CH0_S)
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH0_V 0x00000001U
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH0_S 20
|
|
|
+/** RMT_LOOP_STOP_EN_CH0 : R/W; bitpos: [21]; default: 0;
|
|
|
+ * This bit is used to enable the loop send stop function after the loop counter
|
|
|
+ * counts to loop number for CHANNEL0.
|
|
|
+ */
|
|
|
+#define RMT_LOOP_STOP_EN_CH0 (BIT(21))
|
|
|
+#define RMT_LOOP_STOP_EN_CH0_M (RMT_LOOP_STOP_EN_CH0_V << RMT_LOOP_STOP_EN_CH0_S)
|
|
|
+#define RMT_LOOP_STOP_EN_CH0_V 0x00000001U
|
|
|
+#define RMT_LOOP_STOP_EN_CH0_S 21
|
|
|
|
|
|
-#define RMT_CH1_TX_LIM_REG (DR_REG_RMT_BASE + 0xA4)
|
|
|
-/* RMT_LOOP_STOP_EN_CH1 : R/W ;bitpos:[21] ;default: 1'b0 ; */
|
|
|
-/*description: This bit is used to enable the loop send stop function after the loop counter co
|
|
|
-unts to loop number for CHANNEL$n..*/
|
|
|
-#define RMT_LOOP_STOP_EN_CH1 (BIT(21))
|
|
|
-#define RMT_LOOP_STOP_EN_CH1_M (BIT(21))
|
|
|
-#define RMT_LOOP_STOP_EN_CH1_V 0x1
|
|
|
-#define RMT_LOOP_STOP_EN_CH1_S 21
|
|
|
-/* RMT_LOOP_COUNT_RESET_CH1 : WT ;bitpos:[20] ;default: 1'b0 ; */
|
|
|
-/*description: This register is used to reset the loop count when tx_conti_mode is valid..*/
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH1 (BIT(20))
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH1_M (BIT(20))
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH1_V 0x1
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH1_S 20
|
|
|
-/* RMT_TX_LOOP_CNT_EN_CH1 : R/W ;bitpos:[19] ;default: 1'b0 ; */
|
|
|
-/*description: This register is the enabled bit for loop count..*/
|
|
|
+/** RMT_CH1_TX_LIM_REG register
|
|
|
+ * Channel 1 Tx event configuration register
|
|
|
+ */
|
|
|
+#define RMT_CH1_TX_LIM_REG (DR_REG_RMT_BASE + 0xa4)
|
|
|
+/** RMT_TX_LIM_CH1 : R/W; bitpos: [8:0]; default: 128;
|
|
|
+ * This register is used to configure the maximum entries that CHANNEL1 can send out.
|
|
|
+ */
|
|
|
+#define RMT_TX_LIM_CH1 0x000001FFU
|
|
|
+#define RMT_TX_LIM_CH1_M (RMT_TX_LIM_CH1_V << RMT_TX_LIM_CH1_S)
|
|
|
+#define RMT_TX_LIM_CH1_V 0x000001FFU
|
|
|
+#define RMT_TX_LIM_CH1_S 0
|
|
|
+/** RMT_TX_LOOP_NUM_CH1 : R/W; bitpos: [18:9]; default: 0;
|
|
|
+ * This register is used to configure the maximum loop count when tx_conti_mode is
|
|
|
+ * valid.
|
|
|
+ */
|
|
|
+#define RMT_TX_LOOP_NUM_CH1 0x000003FFU
|
|
|
+#define RMT_TX_LOOP_NUM_CH1_M (RMT_TX_LOOP_NUM_CH1_V << RMT_TX_LOOP_NUM_CH1_S)
|
|
|
+#define RMT_TX_LOOP_NUM_CH1_V 0x000003FFU
|
|
|
+#define RMT_TX_LOOP_NUM_CH1_S 9
|
|
|
+/** RMT_TX_LOOP_CNT_EN_CH1 : R/W; bitpos: [19]; default: 0;
|
|
|
+ * This register is the enabled bit for loop count.
|
|
|
+ */
|
|
|
#define RMT_TX_LOOP_CNT_EN_CH1 (BIT(19))
|
|
|
-#define RMT_TX_LOOP_CNT_EN_CH1_M (BIT(19))
|
|
|
-#define RMT_TX_LOOP_CNT_EN_CH1_V 0x1
|
|
|
+#define RMT_TX_LOOP_CNT_EN_CH1_M (RMT_TX_LOOP_CNT_EN_CH1_V << RMT_TX_LOOP_CNT_EN_CH1_S)
|
|
|
+#define RMT_TX_LOOP_CNT_EN_CH1_V 0x00000001U
|
|
|
#define RMT_TX_LOOP_CNT_EN_CH1_S 19
|
|
|
-/* RMT_TX_LOOP_NUM_CH1 : R/W ;bitpos:[18:9] ;default: 10'b0 ; */
|
|
|
-/*description: This register is used to configure the maximum loop count when tx_conti_mode is
|
|
|
-valid..*/
|
|
|
-#define RMT_TX_LOOP_NUM_CH1 0x000003FF
|
|
|
-#define RMT_TX_LOOP_NUM_CH1_M ((RMT_TX_LOOP_NUM_CH1_V)<<(RMT_TX_LOOP_NUM_CH1_S))
|
|
|
-#define RMT_TX_LOOP_NUM_CH1_V 0x3FF
|
|
|
-#define RMT_TX_LOOP_NUM_CH1_S 9
|
|
|
-/* RMT_TX_LIM_CH1 : R/W ;bitpos:[8:0] ;default: 9'h80 ; */
|
|
|
-/*description: This register is used to configure the maximum entries that CHANNEL$n can send o
|
|
|
-ut..*/
|
|
|
-#define RMT_TX_LIM_CH1 0x000001FF
|
|
|
-#define RMT_TX_LIM_CH1_M ((RMT_TX_LIM_CH1_V)<<(RMT_TX_LIM_CH1_S))
|
|
|
-#define RMT_TX_LIM_CH1_V 0x1FF
|
|
|
-#define RMT_TX_LIM_CH1_S 0
|
|
|
+/** RMT_LOOP_COUNT_RESET_CH1 : WT; bitpos: [20]; default: 0;
|
|
|
+ * This register is used to reset the loop count when tx_conti_mode is valid.
|
|
|
+ */
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH1 (BIT(20))
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH1_M (RMT_LOOP_COUNT_RESET_CH1_V << RMT_LOOP_COUNT_RESET_CH1_S)
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH1_V 0x00000001U
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH1_S 20
|
|
|
+/** RMT_LOOP_STOP_EN_CH1 : R/W; bitpos: [21]; default: 0;
|
|
|
+ * This bit is used to enable the loop send stop function after the loop counter
|
|
|
+ * counts to loop number for CHANNEL1.
|
|
|
+ */
|
|
|
+#define RMT_LOOP_STOP_EN_CH1 (BIT(21))
|
|
|
+#define RMT_LOOP_STOP_EN_CH1_M (RMT_LOOP_STOP_EN_CH1_V << RMT_LOOP_STOP_EN_CH1_S)
|
|
|
+#define RMT_LOOP_STOP_EN_CH1_V 0x00000001U
|
|
|
+#define RMT_LOOP_STOP_EN_CH1_S 21
|
|
|
|
|
|
-#define RMT_CH2_TX_LIM_REG (DR_REG_RMT_BASE + 0xA8)
|
|
|
-/* RMT_LOOP_STOP_EN_CH2 : R/W ;bitpos:[21] ;default: 1'b0 ; */
|
|
|
-/*description: This bit is used to enable the loop send stop function after the loop counter co
|
|
|
-unts to loop number for CHANNEL$n..*/
|
|
|
-#define RMT_LOOP_STOP_EN_CH2 (BIT(21))
|
|
|
-#define RMT_LOOP_STOP_EN_CH2_M (BIT(21))
|
|
|
-#define RMT_LOOP_STOP_EN_CH2_V 0x1
|
|
|
-#define RMT_LOOP_STOP_EN_CH2_S 21
|
|
|
-/* RMT_LOOP_COUNT_RESET_CH2 : WT ;bitpos:[20] ;default: 1'b0 ; */
|
|
|
-/*description: This register is used to reset the loop count when tx_conti_mode is valid..*/
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH2 (BIT(20))
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH2_M (BIT(20))
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH2_V 0x1
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH2_S 20
|
|
|
-/* RMT_TX_LOOP_CNT_EN_CH2 : R/W ;bitpos:[19] ;default: 1'b0 ; */
|
|
|
-/*description: This register is the enabled bit for loop count..*/
|
|
|
+/** RMT_CH2_TX_LIM_REG register
|
|
|
+ * Channel 2 Tx event configuration register
|
|
|
+ */
|
|
|
+#define RMT_CH2_TX_LIM_REG (DR_REG_RMT_BASE + 0xa8)
|
|
|
+/** RMT_TX_LIM_CH2 : R/W; bitpos: [8:0]; default: 128;
|
|
|
+ * This register is used to configure the maximum entries that CHANNEL2 can send out.
|
|
|
+ */
|
|
|
+#define RMT_TX_LIM_CH2 0x000001FFU
|
|
|
+#define RMT_TX_LIM_CH2_M (RMT_TX_LIM_CH2_V << RMT_TX_LIM_CH2_S)
|
|
|
+#define RMT_TX_LIM_CH2_V 0x000001FFU
|
|
|
+#define RMT_TX_LIM_CH2_S 0
|
|
|
+/** RMT_TX_LOOP_NUM_CH2 : R/W; bitpos: [18:9]; default: 0;
|
|
|
+ * This register is used to configure the maximum loop count when tx_conti_mode is
|
|
|
+ * valid.
|
|
|
+ */
|
|
|
+#define RMT_TX_LOOP_NUM_CH2 0x000003FFU
|
|
|
+#define RMT_TX_LOOP_NUM_CH2_M (RMT_TX_LOOP_NUM_CH2_V << RMT_TX_LOOP_NUM_CH2_S)
|
|
|
+#define RMT_TX_LOOP_NUM_CH2_V 0x000003FFU
|
|
|
+#define RMT_TX_LOOP_NUM_CH2_S 9
|
|
|
+/** RMT_TX_LOOP_CNT_EN_CH2 : R/W; bitpos: [19]; default: 0;
|
|
|
+ * This register is the enabled bit for loop count.
|
|
|
+ */
|
|
|
#define RMT_TX_LOOP_CNT_EN_CH2 (BIT(19))
|
|
|
-#define RMT_TX_LOOP_CNT_EN_CH2_M (BIT(19))
|
|
|
-#define RMT_TX_LOOP_CNT_EN_CH2_V 0x1
|
|
|
+#define RMT_TX_LOOP_CNT_EN_CH2_M (RMT_TX_LOOP_CNT_EN_CH2_V << RMT_TX_LOOP_CNT_EN_CH2_S)
|
|
|
+#define RMT_TX_LOOP_CNT_EN_CH2_V 0x00000001U
|
|
|
#define RMT_TX_LOOP_CNT_EN_CH2_S 19
|
|
|
-/* RMT_TX_LOOP_NUM_CH2 : R/W ;bitpos:[18:9] ;default: 10'b0 ; */
|
|
|
-/*description: This register is used to configure the maximum loop count when tx_conti_mode is
|
|
|
-valid..*/
|
|
|
-#define RMT_TX_LOOP_NUM_CH2 0x000003FF
|
|
|
-#define RMT_TX_LOOP_NUM_CH2_M ((RMT_TX_LOOP_NUM_CH2_V)<<(RMT_TX_LOOP_NUM_CH2_S))
|
|
|
-#define RMT_TX_LOOP_NUM_CH2_V 0x3FF
|
|
|
-#define RMT_TX_LOOP_NUM_CH2_S 9
|
|
|
-/* RMT_TX_LIM_CH2 : R/W ;bitpos:[8:0] ;default: 9'h80 ; */
|
|
|
-/*description: This register is used to configure the maximum entries that CHANNEL$n can send o
|
|
|
-ut..*/
|
|
|
-#define RMT_TX_LIM_CH2 0x000001FF
|
|
|
-#define RMT_TX_LIM_CH2_M ((RMT_TX_LIM_CH2_V)<<(RMT_TX_LIM_CH2_S))
|
|
|
-#define RMT_TX_LIM_CH2_V 0x1FF
|
|
|
-#define RMT_TX_LIM_CH2_S 0
|
|
|
+/** RMT_LOOP_COUNT_RESET_CH2 : WT; bitpos: [20]; default: 0;
|
|
|
+ * This register is used to reset the loop count when tx_conti_mode is valid.
|
|
|
+ */
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH2 (BIT(20))
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH2_M (RMT_LOOP_COUNT_RESET_CH2_V << RMT_LOOP_COUNT_RESET_CH2_S)
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH2_V 0x00000001U
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH2_S 20
|
|
|
+/** RMT_LOOP_STOP_EN_CH2 : R/W; bitpos: [21]; default: 0;
|
|
|
+ * This bit is used to enable the loop send stop function after the loop counter
|
|
|
+ * counts to loop number for CHANNEL2.
|
|
|
+ */
|
|
|
+#define RMT_LOOP_STOP_EN_CH2 (BIT(21))
|
|
|
+#define RMT_LOOP_STOP_EN_CH2_M (RMT_LOOP_STOP_EN_CH2_V << RMT_LOOP_STOP_EN_CH2_S)
|
|
|
+#define RMT_LOOP_STOP_EN_CH2_V 0x00000001U
|
|
|
+#define RMT_LOOP_STOP_EN_CH2_S 21
|
|
|
|
|
|
-#define RMT_CH3_TX_LIM_REG (DR_REG_RMT_BASE + 0xAC)
|
|
|
-/* RMT_LOOP_STOP_EN_CH3 : R/W ;bitpos:[21] ;default: 1'b0 ; */
|
|
|
-/*description: This bit is used to enable the loop send stop function after the loop counter co
|
|
|
-unts to loop number for CHANNEL$n..*/
|
|
|
-#define RMT_LOOP_STOP_EN_CH3 (BIT(21))
|
|
|
-#define RMT_LOOP_STOP_EN_CH3_M (BIT(21))
|
|
|
-#define RMT_LOOP_STOP_EN_CH3_V 0x1
|
|
|
-#define RMT_LOOP_STOP_EN_CH3_S 21
|
|
|
-/* RMT_LOOP_COUNT_RESET_CH3 : WT ;bitpos:[20] ;default: 1'b0 ; */
|
|
|
-/*description: This register is used to reset the loop count when tx_conti_mode is valid..*/
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH3 (BIT(20))
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH3_M (BIT(20))
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH3_V 0x1
|
|
|
-#define RMT_LOOP_COUNT_RESET_CH3_S 20
|
|
|
-/* RMT_TX_LOOP_CNT_EN_CH3 : R/W ;bitpos:[19] ;default: 1'b0 ; */
|
|
|
-/*description: This register is the enabled bit for loop count..*/
|
|
|
+/** RMT_CH3_TX_LIM_REG register
|
|
|
+ * Channel 3 Tx event configuration register
|
|
|
+ */
|
|
|
+#define RMT_CH3_TX_LIM_REG (DR_REG_RMT_BASE + 0xac)
|
|
|
+/** RMT_TX_LIM_CH3 : R/W; bitpos: [8:0]; default: 128;
|
|
|
+ * This register is used to configure the maximum entries that CHANNEL3 can send out.
|
|
|
+ */
|
|
|
+#define RMT_TX_LIM_CH3 0x000001FFU
|
|
|
+#define RMT_TX_LIM_CH3_M (RMT_TX_LIM_CH3_V << RMT_TX_LIM_CH3_S)
|
|
|
+#define RMT_TX_LIM_CH3_V 0x000001FFU
|
|
|
+#define RMT_TX_LIM_CH3_S 0
|
|
|
+/** RMT_TX_LOOP_NUM_CH3 : R/W; bitpos: [18:9]; default: 0;
|
|
|
+ * This register is used to configure the maximum loop count when tx_conti_mode is
|
|
|
+ * valid.
|
|
|
+ */
|
|
|
+#define RMT_TX_LOOP_NUM_CH3 0x000003FFU
|
|
|
+#define RMT_TX_LOOP_NUM_CH3_M (RMT_TX_LOOP_NUM_CH3_V << RMT_TX_LOOP_NUM_CH3_S)
|
|
|
+#define RMT_TX_LOOP_NUM_CH3_V 0x000003FFU
|
|
|
+#define RMT_TX_LOOP_NUM_CH3_S 9
|
|
|
+/** RMT_TX_LOOP_CNT_EN_CH3 : R/W; bitpos: [19]; default: 0;
|
|
|
+ * This register is the enabled bit for loop count.
|
|
|
+ */
|
|
|
#define RMT_TX_LOOP_CNT_EN_CH3 (BIT(19))
|
|
|
-#define RMT_TX_LOOP_CNT_EN_CH3_M (BIT(19))
|
|
|
-#define RMT_TX_LOOP_CNT_EN_CH3_V 0x1
|
|
|
+#define RMT_TX_LOOP_CNT_EN_CH3_M (RMT_TX_LOOP_CNT_EN_CH3_V << RMT_TX_LOOP_CNT_EN_CH3_S)
|
|
|
+#define RMT_TX_LOOP_CNT_EN_CH3_V 0x00000001U
|
|
|
#define RMT_TX_LOOP_CNT_EN_CH3_S 19
|
|
|
-/* RMT_TX_LOOP_NUM_CH3 : R/W ;bitpos:[18:9] ;default: 10'b0 ; */
|
|
|
-/*description: This register is used to configure the maximum loop count when tx_conti_mode is
|
|
|
-valid..*/
|
|
|
-#define RMT_TX_LOOP_NUM_CH3 0x000003FF
|
|
|
-#define RMT_TX_LOOP_NUM_CH3_M ((RMT_TX_LOOP_NUM_CH3_V)<<(RMT_TX_LOOP_NUM_CH3_S))
|
|
|
-#define RMT_TX_LOOP_NUM_CH3_V 0x3FF
|
|
|
-#define RMT_TX_LOOP_NUM_CH3_S 9
|
|
|
-/* RMT_TX_LIM_CH3 : R/W ;bitpos:[8:0] ;default: 9'h80 ; */
|
|
|
-/*description: This register is used to configure the maximum entries that CHANNEL$n can send o
|
|
|
-ut..*/
|
|
|
-#define RMT_TX_LIM_CH3 0x000001FF
|
|
|
-#define RMT_TX_LIM_CH3_M ((RMT_TX_LIM_CH3_V)<<(RMT_TX_LIM_CH3_S))
|
|
|
-#define RMT_TX_LIM_CH3_V 0x1FF
|
|
|
-#define RMT_TX_LIM_CH3_S 0
|
|
|
+/** RMT_LOOP_COUNT_RESET_CH3 : WT; bitpos: [20]; default: 0;
|
|
|
+ * This register is used to reset the loop count when tx_conti_mode is valid.
|
|
|
+ */
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH3 (BIT(20))
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH3_M (RMT_LOOP_COUNT_RESET_CH3_V << RMT_LOOP_COUNT_RESET_CH3_S)
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH3_V 0x00000001U
|
|
|
+#define RMT_LOOP_COUNT_RESET_CH3_S 20
|
|
|
+/** RMT_LOOP_STOP_EN_CH3 : R/W; bitpos: [21]; default: 0;
|
|
|
+ * This bit is used to enable the loop send stop function after the loop counter
|
|
|
+ * counts to loop number for CHANNEL3.
|
|
|
+ */
|
|
|
+#define RMT_LOOP_STOP_EN_CH3 (BIT(21))
|
|
|
+#define RMT_LOOP_STOP_EN_CH3_M (RMT_LOOP_STOP_EN_CH3_V << RMT_LOOP_STOP_EN_CH3_S)
|
|
|
+#define RMT_LOOP_STOP_EN_CH3_V 0x00000001U
|
|
|
+#define RMT_LOOP_STOP_EN_CH3_S 21
|
|
|
|
|
|
-#define RMT_CH4_RX_LIM_REG (DR_REG_RMT_BASE + 0xB0)
|
|
|
-/* RMT_RX_LIM_CH4 : R/W ;bitpos:[8:0] ;default: 9'h80 ; */
|
|
|
-/*description: This register is used to configure the maximum entries that CHANNEL$m can receiv
|
|
|
-e..*/
|
|
|
-#define RMT_RX_LIM_CH4 0x000001FF
|
|
|
-#define RMT_RX_LIM_CH4_M ((RMT_RX_LIM_CH4_V)<<(RMT_RX_LIM_CH4_S))
|
|
|
-#define RMT_RX_LIM_CH4_V 0x1FF
|
|
|
-#define RMT_RX_LIM_CH4_S 0
|
|
|
+/** RMT_CH4_RX_LIM_REG register
|
|
|
+ * Channel 4 Rx event configuration register
|
|
|
+ */
|
|
|
+#define RMT_CH4_RX_LIM_REG (DR_REG_RMT_BASE + 0xb0)
|
|
|
+/** RMT_CH4_RX_LIM_REG : R/W; bitpos: [8:0]; default: 128;
|
|
|
+ * This register is used to configure the maximum entries that CHANNEL4 can receive.
|
|
|
+ */
|
|
|
+#define RMT_CH4_RX_LIM_REG 0x000001FFU
|
|
|
+#define RMT_CH4_RX_LIM_REG_M (RMT_CH4_RX_LIM_REG_V << RMT_CH4_RX_LIM_REG_S)
|
|
|
+#define RMT_CH4_RX_LIM_REG_V 0x000001FFU
|
|
|
+#define RMT_CH4_RX_LIM_REG_S 0
|
|
|
|
|
|
-#define RMT_CH5_RX_LIM_REG (DR_REG_RMT_BASE + 0xB4)
|
|
|
-/* RMT_RX_LIM_CH5 : R/W ;bitpos:[8:0] ;default: 9'h80 ; */
|
|
|
-/*description: This register is used to configure the maximum entries that CHANNEL$m can receiv
|
|
|
-e..*/
|
|
|
-#define RMT_RX_LIM_CH5 0x000001FF
|
|
|
-#define RMT_RX_LIM_CH5_M ((RMT_RX_LIM_CH5_V)<<(RMT_RX_LIM_CH5_S))
|
|
|
-#define RMT_RX_LIM_CH5_V 0x1FF
|
|
|
-#define RMT_RX_LIM_CH5_S 0
|
|
|
+/** RMT_CH5_RX_LIM_REG register
|
|
|
+ * Channel 5 Rx event configuration register
|
|
|
+ */
|
|
|
+#define RMT_CH5_RX_LIM_REG (DR_REG_RMT_BASE + 0xb4)
|
|
|
+/** RMT_CH5_RX_LIM_REG : R/W; bitpos: [8:0]; default: 128;
|
|
|
+ * This register is used to configure the maximum entries that CHANNEL5 can receive.
|
|
|
+ */
|
|
|
+#define RMT_CH5_RX_LIM_REG 0x000001FFU
|
|
|
+#define RMT_CH5_RX_LIM_REG_M (RMT_CH5_RX_LIM_REG_V << RMT_CH5_RX_LIM_REG_S)
|
|
|
+#define RMT_CH5_RX_LIM_REG_V 0x000001FFU
|
|
|
+#define RMT_CH5_RX_LIM_REG_S 0
|
|
|
|
|
|
-#define RMT_CH6_RX_LIM_REG (DR_REG_RMT_BASE + 0xB8)
|
|
|
-/* RMT_RX_LIM_CH6 : R/W ;bitpos:[8:0] ;default: 9'h80 ; */
|
|
|
-/*description: This register is used to configure the maximum entries that CHANNEL$m can receiv
|
|
|
-e..*/
|
|
|
-#define RMT_RX_LIM_CH6 0x000001FF
|
|
|
-#define RMT_RX_LIM_CH6_M ((RMT_RX_LIM_CH6_V)<<(RMT_RX_LIM_CH6_S))
|
|
|
-#define RMT_RX_LIM_CH6_V 0x1FF
|
|
|
-#define RMT_RX_LIM_CH6_S 0
|
|
|
+/** RMT_CH6_RX_LIM_REG register
|
|
|
+ * Channel 6 Rx event configuration register
|
|
|
+ */
|
|
|
+#define RMT_CH6_RX_LIM_REG (DR_REG_RMT_BASE + 0xb8)
|
|
|
+/** RMT_CH6_RX_LIM_REG : R/W; bitpos: [8:0]; default: 128;
|
|
|
+ * This register is used to configure the maximum entries that CHANNEL6 can receive.
|
|
|
+ */
|
|
|
+#define RMT_CH6_RX_LIM_REG 0x000001FFU
|
|
|
+#define RMT_CH6_RX_LIM_REG_M (RMT_CH6_RX_LIM_REG_V << RMT_CH6_RX_LIM_REG_S)
|
|
|
+#define RMT_CH6_RX_LIM_REG_V 0x000001FFU
|
|
|
+#define RMT_CH6_RX_LIM_REG_S 0
|
|
|
|
|
|
-#define RMT_CH7_RX_LIM_REG (DR_REG_RMT_BASE + 0xBC)
|
|
|
-/* RMT_RX_LIM_CH7 : R/W ;bitpos:[8:0] ;default: 9'h80 ; */
|
|
|
-/*description: This register is used to configure the maximum entries that CHANNEL$m can receiv
|
|
|
-e..*/
|
|
|
-#define RMT_RX_LIM_CH7 0x000001FF
|
|
|
-#define RMT_RX_LIM_CH7_M ((RMT_RX_LIM_CH7_V)<<(RMT_RX_LIM_CH7_S))
|
|
|
-#define RMT_RX_LIM_CH7_V 0x1FF
|
|
|
-#define RMT_RX_LIM_CH7_S 0
|
|
|
+/** RMT_CH7_RX_LIM_REG register
|
|
|
+ * Channel 7 Rx event configuration register
|
|
|
+ */
|
|
|
+#define RMT_CH7_RX_LIM_REG (DR_REG_RMT_BASE + 0xbc)
|
|
|
+/** RMT_CH7_RX_LIM_REG : R/W; bitpos: [8:0]; default: 128;
|
|
|
+ * This register is used to configure the maximum entries that CHANNEL7 can receive.
|
|
|
+ */
|
|
|
+#define RMT_CH7_RX_LIM_REG 0x000001FFU
|
|
|
+#define RMT_CH7_RX_LIM_REG_M (RMT_CH7_RX_LIM_REG_V << RMT_CH7_RX_LIM_REG_S)
|
|
|
+#define RMT_CH7_RX_LIM_REG_V 0x000001FFU
|
|
|
+#define RMT_CH7_RX_LIM_REG_S 0
|
|
|
|
|
|
-#define RMT_SYS_CONF_REG (DR_REG_RMT_BASE + 0xC0)
|
|
|
-/* RMT_CLK_EN : R/W ;bitpos:[31] ;default: 1'h0 ; */
|
|
|
-/*description: RMT register clock gate enable signal. 1: Power up the drive clock of registers.
|
|
|
- 0: Power down the drive clock of registers.*/
|
|
|
-#define RMT_CLK_EN (BIT(31))
|
|
|
-#define RMT_CLK_EN_M (BIT(31))
|
|
|
-#define RMT_CLK_EN_V 0x1
|
|
|
-#define RMT_CLK_EN_S 31
|
|
|
-/* RMT_SCLK_ACTIVE : R/W ;bitpos:[26] ;default: 1'h1 ; */
|
|
|
-/*description: rmt_sclk switch.*/
|
|
|
-#define RMT_SCLK_ACTIVE (BIT(26))
|
|
|
-#define RMT_SCLK_ACTIVE_M (BIT(26))
|
|
|
-#define RMT_SCLK_ACTIVE_V 0x1
|
|
|
-#define RMT_SCLK_ACTIVE_S 26
|
|
|
-/* RMT_SCLK_SEL : R/W ;bitpos:[25:24] ;default: 2'h1 ; */
|
|
|
-/*description: choose the clock source of rmt_sclk. 1:CLK_80Mhz;2:CLK_8MHz; 2:XTAL .*/
|
|
|
-#define RMT_SCLK_SEL 0x00000003
|
|
|
-#define RMT_SCLK_SEL_M ((RMT_SCLK_SEL_V)<<(RMT_SCLK_SEL_S))
|
|
|
-#define RMT_SCLK_SEL_V 0x3
|
|
|
-#define RMT_SCLK_SEL_S 24
|
|
|
-/* RMT_SCLK_DIV_B : R/W ;bitpos:[23:18] ;default: 6'h0 ; */
|
|
|
-/*description: the denominator of the fractional part of the fractional divisor.*/
|
|
|
-#define RMT_SCLK_DIV_B 0x0000003F
|
|
|
-#define RMT_SCLK_DIV_B_M ((RMT_SCLK_DIV_B_V)<<(RMT_SCLK_DIV_B_S))
|
|
|
-#define RMT_SCLK_DIV_B_V 0x3F
|
|
|
-#define RMT_SCLK_DIV_B_S 18
|
|
|
-/* RMT_SCLK_DIV_A : R/W ;bitpos:[17:12] ;default: 6'h0 ; */
|
|
|
-/*description: the numerator of the fractional part of the fractional divisor.*/
|
|
|
-#define RMT_SCLK_DIV_A 0x0000003F
|
|
|
-#define RMT_SCLK_DIV_A_M ((RMT_SCLK_DIV_A_V)<<(RMT_SCLK_DIV_A_S))
|
|
|
-#define RMT_SCLK_DIV_A_V 0x3F
|
|
|
-#define RMT_SCLK_DIV_A_S 12
|
|
|
-/* RMT_SCLK_DIV_NUM : R/W ;bitpos:[11:4] ;default: 8'h1 ; */
|
|
|
-/*description: the integral part of the fractional divisor.*/
|
|
|
-#define RMT_SCLK_DIV_NUM 0x000000FF
|
|
|
-#define RMT_SCLK_DIV_NUM_M ((RMT_SCLK_DIV_NUM_V)<<(RMT_SCLK_DIV_NUM_S))
|
|
|
-#define RMT_SCLK_DIV_NUM_V 0xFF
|
|
|
-#define RMT_SCLK_DIV_NUM_S 4
|
|
|
-/* RMT_MEM_FORCE_PU : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
|
-/*description: 1: Disable RMT memory light sleep power down function. 0: Power down RMT memory
|
|
|
-when RMT is in light sleep mode..*/
|
|
|
-#define RMT_MEM_FORCE_PU (BIT(3))
|
|
|
-#define RMT_MEM_FORCE_PU_M (BIT(3))
|
|
|
-#define RMT_MEM_FORCE_PU_V 0x1
|
|
|
-#define RMT_MEM_FORCE_PU_S 3
|
|
|
-/* RMT_MEM_FORCE_PD : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to power down RMT memory..*/
|
|
|
-#define RMT_MEM_FORCE_PD (BIT(2))
|
|
|
-#define RMT_MEM_FORCE_PD_M (BIT(2))
|
|
|
-#define RMT_MEM_FORCE_PD_V 0x1
|
|
|
-#define RMT_MEM_FORCE_PD_S 2
|
|
|
-/* RMT_MEM_CLK_FORCE_ON : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to enable the clock for RMT memory..*/
|
|
|
-#define RMT_MEM_CLK_FORCE_ON (BIT(1))
|
|
|
-#define RMT_MEM_CLK_FORCE_ON_M (BIT(1))
|
|
|
-#define RMT_MEM_CLK_FORCE_ON_V 0x1
|
|
|
-#define RMT_MEM_CLK_FORCE_ON_S 1
|
|
|
-/* RMT_APB_FIFO_MASK : R/W ;bitpos:[0] ;default: 1'h0 ; */
|
|
|
-/*description: 1'h1: access memory directly. 1'h0: access memory by FIFO..*/
|
|
|
+/** RMT_SYS_CONF_REG register
|
|
|
+ * RMT apb configuration register
|
|
|
+ */
|
|
|
+#define RMT_SYS_CONF_REG (DR_REG_RMT_BASE + 0xc0)
|
|
|
+/** RMT_APB_FIFO_MASK : R/W; bitpos: [0]; default: 0;
|
|
|
+ * 1'h1: access memory directly. 1'h0: access memory by FIFO.
|
|
|
+ */
|
|
|
#define RMT_APB_FIFO_MASK (BIT(0))
|
|
|
-#define RMT_APB_FIFO_MASK_M (BIT(0))
|
|
|
-#define RMT_APB_FIFO_MASK_V 0x1
|
|
|
+#define RMT_APB_FIFO_MASK_M (RMT_APB_FIFO_MASK_V << RMT_APB_FIFO_MASK_S)
|
|
|
+#define RMT_APB_FIFO_MASK_V 0x00000001U
|
|
|
#define RMT_APB_FIFO_MASK_S 0
|
|
|
+/** RMT_MEM_CLK_FORCE_ON : R/W; bitpos: [1]; default: 0;
|
|
|
+ * Set this bit to enable the clock for RMT memory.
|
|
|
+ */
|
|
|
+#define RMT_MEM_CLK_FORCE_ON (BIT(1))
|
|
|
+#define RMT_MEM_CLK_FORCE_ON_M (RMT_MEM_CLK_FORCE_ON_V << RMT_MEM_CLK_FORCE_ON_S)
|
|
|
+#define RMT_MEM_CLK_FORCE_ON_V 0x00000001U
|
|
|
+#define RMT_MEM_CLK_FORCE_ON_S 1
|
|
|
+/** RMT_MEM_FORCE_PD : R/W; bitpos: [2]; default: 0;
|
|
|
+ * Set this bit to power down RMT memory.
|
|
|
+ */
|
|
|
+#define RMT_MEM_FORCE_PD (BIT(2))
|
|
|
+#define RMT_MEM_FORCE_PD_M (RMT_MEM_FORCE_PD_V << RMT_MEM_FORCE_PD_S)
|
|
|
+#define RMT_MEM_FORCE_PD_V 0x00000001U
|
|
|
+#define RMT_MEM_FORCE_PD_S 2
|
|
|
+/** RMT_MEM_FORCE_PU : R/W; bitpos: [3]; default: 0;
|
|
|
+ * 1: Disable RMT memory light sleep power down function. 0: Power down RMT memory
|
|
|
+ * when RMT is in light sleep mode.
|
|
|
+ */
|
|
|
+#define RMT_MEM_FORCE_PU (BIT(3))
|
|
|
+#define RMT_MEM_FORCE_PU_M (RMT_MEM_FORCE_PU_V << RMT_MEM_FORCE_PU_S)
|
|
|
+#define RMT_MEM_FORCE_PU_V 0x00000001U
|
|
|
+#define RMT_MEM_FORCE_PU_S 3
|
|
|
+/** RMT_SCLK_DIV_NUM : R/W; bitpos: [11:4]; default: 1;
|
|
|
+ * the integral part of the fractional divisor
|
|
|
+ */
|
|
|
+#define RMT_SCLK_DIV_NUM 0x000000FFU
|
|
|
+#define RMT_SCLK_DIV_NUM_M (RMT_SCLK_DIV_NUM_V << RMT_SCLK_DIV_NUM_S)
|
|
|
+#define RMT_SCLK_DIV_NUM_V 0x000000FFU
|
|
|
+#define RMT_SCLK_DIV_NUM_S 4
|
|
|
+/** RMT_SCLK_DIV_A : R/W; bitpos: [17:12]; default: 0;
|
|
|
+ * the numerator of the fractional part of the fractional divisor
|
|
|
+ */
|
|
|
+#define RMT_SCLK_DIV_A 0x0000003FU
|
|
|
+#define RMT_SCLK_DIV_A_M (RMT_SCLK_DIV_A_V << RMT_SCLK_DIV_A_S)
|
|
|
+#define RMT_SCLK_DIV_A_V 0x0000003FU
|
|
|
+#define RMT_SCLK_DIV_A_S 12
|
|
|
+/** RMT_SCLK_DIV_B : R/W; bitpos: [23:18]; default: 0;
|
|
|
+ * the denominator of the fractional part of the fractional divisor
|
|
|
+ */
|
|
|
+#define RMT_SCLK_DIV_B 0x0000003FU
|
|
|
+#define RMT_SCLK_DIV_B_M (RMT_SCLK_DIV_B_V << RMT_SCLK_DIV_B_S)
|
|
|
+#define RMT_SCLK_DIV_B_V 0x0000003FU
|
|
|
+#define RMT_SCLK_DIV_B_S 18
|
|
|
+/** RMT_SCLK_SEL : R/W; bitpos: [25:24]; default: 1;
|
|
|
+ * choose the clock source of rmt_sclk. 1:CLK_80Mhz;2:CLK_8MHz; 2:XTAL
|
|
|
+ */
|
|
|
+#define RMT_SCLK_SEL 0x00000003U
|
|
|
+#define RMT_SCLK_SEL_M (RMT_SCLK_SEL_V << RMT_SCLK_SEL_S)
|
|
|
+#define RMT_SCLK_SEL_V 0x00000003U
|
|
|
+#define RMT_SCLK_SEL_S 24
|
|
|
+/** RMT_SCLK_ACTIVE : R/W; bitpos: [26]; default: 1;
|
|
|
+ * rmt_sclk switch
|
|
|
+ */
|
|
|
+#define RMT_SCLK_ACTIVE (BIT(26))
|
|
|
+#define RMT_SCLK_ACTIVE_M (RMT_SCLK_ACTIVE_V << RMT_SCLK_ACTIVE_S)
|
|
|
+#define RMT_SCLK_ACTIVE_V 0x00000001U
|
|
|
+#define RMT_SCLK_ACTIVE_S 26
|
|
|
+/** RMT_CLK_EN : R/W; bitpos: [31]; default: 0;
|
|
|
+ * RMT register clock gate enable signal. 1: Power up the drive clock of registers. 0:
|
|
|
+ * Power down the drive clock of registers
|
|
|
+ */
|
|
|
+#define RMT_CLK_EN (BIT(31))
|
|
|
+#define RMT_CLK_EN_M (RMT_CLK_EN_V << RMT_CLK_EN_S)
|
|
|
+#define RMT_CLK_EN_V 0x00000001U
|
|
|
+#define RMT_CLK_EN_S 31
|
|
|
|
|
|
-#define RMT_TX_SIM_REG (DR_REG_RMT_BASE + 0xC4)
|
|
|
-/* RMT_TX_SIM_EN : R/W ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: This register is used to enable multiple of channels to start sending data synch
|
|
|
-ronously..*/
|
|
|
-#define RMT_TX_SIM_EN (BIT(4))
|
|
|
-#define RMT_TX_SIM_EN_M (BIT(4))
|
|
|
-#define RMT_TX_SIM_EN_V 0x1
|
|
|
-#define RMT_TX_SIM_EN_S 4
|
|
|
-/* RMT_TX_SIM_CH3 : R/W ;bitpos:[3] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to enable CHANNEL$n to start sending data synchronously with other
|
|
|
-enabled channels..*/
|
|
|
-#define RMT_TX_SIM_CH3 (BIT(3))
|
|
|
-#define RMT_TX_SIM_CH3_M (BIT(3))
|
|
|
-#define RMT_TX_SIM_CH3_V 0x1
|
|
|
-#define RMT_TX_SIM_CH3_S 3
|
|
|
-/* RMT_TX_SIM_CH2 : R/W ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to enable CHANNEL$n to start sending data synchronously with other
|
|
|
-enabled channels..*/
|
|
|
-#define RMT_TX_SIM_CH2 (BIT(2))
|
|
|
-#define RMT_TX_SIM_CH2_M (BIT(2))
|
|
|
-#define RMT_TX_SIM_CH2_V 0x1
|
|
|
-#define RMT_TX_SIM_CH2_S 2
|
|
|
-/* RMT_TX_SIM_CH1 : R/W ;bitpos:[1] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to enable CHANNEL$n to start sending data synchronously with other
|
|
|
-enabled channels..*/
|
|
|
-#define RMT_TX_SIM_CH1 (BIT(1))
|
|
|
-#define RMT_TX_SIM_CH1_M (BIT(1))
|
|
|
-#define RMT_TX_SIM_CH1_V 0x1
|
|
|
-#define RMT_TX_SIM_CH1_S 1
|
|
|
-/* RMT_TX_SIM_CH0 : R/W ;bitpos:[0] ;default: 1'b0 ; */
|
|
|
-/*description: Set this bit to enable CHANNEL$n to start sending data synchronously with other
|
|
|
-enabled channels..*/
|
|
|
+/** RMT_TX_SIM_REG register
|
|
|
+ * RMT TX synchronous register
|
|
|
+ */
|
|
|
+#define RMT_TX_SIM_REG (DR_REG_RMT_BASE + 0xc4)
|
|
|
+/** RMT_TX_SIM_CH0 : R/W; bitpos: [0]; default: 0;
|
|
|
+ * Set this bit to enable CHANNEL0 to start sending data synchronously with other
|
|
|
+ * enabled channels.
|
|
|
+ */
|
|
|
#define RMT_TX_SIM_CH0 (BIT(0))
|
|
|
-#define RMT_TX_SIM_CH0_M (BIT(0))
|
|
|
-#define RMT_TX_SIM_CH0_V 0x1
|
|
|
+#define RMT_TX_SIM_CH0_M (RMT_TX_SIM_CH0_V << RMT_TX_SIM_CH0_S)
|
|
|
+#define RMT_TX_SIM_CH0_V 0x00000001U
|
|
|
#define RMT_TX_SIM_CH0_S 0
|
|
|
+/** RMT_TX_SIM_CH1 : R/W; bitpos: [1]; default: 0;
|
|
|
+ * Set this bit to enable CHANNEL1 to start sending data synchronously with other
|
|
|
+ * enabled channels.
|
|
|
+ */
|
|
|
+#define RMT_TX_SIM_CH1 (BIT(1))
|
|
|
+#define RMT_TX_SIM_CH1_M (RMT_TX_SIM_CH1_V << RMT_TX_SIM_CH1_S)
|
|
|
+#define RMT_TX_SIM_CH1_V 0x00000001U
|
|
|
+#define RMT_TX_SIM_CH1_S 1
|
|
|
+/** RMT_TX_SIM_CH2 : R/W; bitpos: [2]; default: 0;
|
|
|
+ * Set this bit to enable CHANNEL2 to start sending data synchronously with other
|
|
|
+ * enabled channels.
|
|
|
+ */
|
|
|
+#define RMT_TX_SIM_CH2 (BIT(2))
|
|
|
+#define RMT_TX_SIM_CH2_M (RMT_TX_SIM_CH2_V << RMT_TX_SIM_CH2_S)
|
|
|
+#define RMT_TX_SIM_CH2_V 0x00000001U
|
|
|
+#define RMT_TX_SIM_CH2_S 2
|
|
|
+/** RMT_TX_SIM_CH3 : R/W; bitpos: [3]; default: 0;
|
|
|
+ * Set this bit to enable CHANNEL3 to start sending data synchronously with other
|
|
|
+ * enabled channels.
|
|
|
+ */
|
|
|
+#define RMT_TX_SIM_CH3 (BIT(3))
|
|
|
+#define RMT_TX_SIM_CH3_M (RMT_TX_SIM_CH3_V << RMT_TX_SIM_CH3_S)
|
|
|
+#define RMT_TX_SIM_CH3_V 0x00000001U
|
|
|
+#define RMT_TX_SIM_CH3_S 3
|
|
|
+/** RMT_TX_SIM_EN : R/W; bitpos: [4]; default: 0;
|
|
|
+ * This register is used to enable multiple of channels to start sending data
|
|
|
+ * synchronously.
|
|
|
+ */
|
|
|
+#define RMT_TX_SIM_EN (BIT(4))
|
|
|
+#define RMT_TX_SIM_EN_M (RMT_TX_SIM_EN_V << RMT_TX_SIM_EN_S)
|
|
|
+#define RMT_TX_SIM_EN_V 0x00000001U
|
|
|
+#define RMT_TX_SIM_EN_S 4
|
|
|
|
|
|
-#define RMT_REF_CNT_RST_REG (DR_REG_RMT_BASE + 0xC8)
|
|
|
-/* RMT_REF_CNT_RST_CH7 : WT ;bitpos:[7] ;default: 1'b0 ; */
|
|
|
-/*description: This register is used to reset the clock divider of CHANNEL$m..*/
|
|
|
-#define RMT_REF_CNT_RST_CH7 (BIT(7))
|
|
|
-#define RMT_REF_CNT_RST_CH7_M (BIT(7))
|
|
|
-#define RMT_REF_CNT_RST_CH7_V 0x1
|
|
|
-#define RMT_REF_CNT_RST_CH7_S 7
|
|
|
-/* RMT_REF_CNT_RST_CH6 : WT ;bitpos:[6] ;default: 1'b0 ; */
|
|
|
-/*description: This register is used to reset the clock divider of CHANNEL$m..*/
|
|
|
-#define RMT_REF_CNT_RST_CH6 (BIT(6))
|
|
|
-#define RMT_REF_CNT_RST_CH6_M (BIT(6))
|
|
|
-#define RMT_REF_CNT_RST_CH6_V 0x1
|
|
|
-#define RMT_REF_CNT_RST_CH6_S 6
|
|
|
-/* RMT_REF_CNT_RST_CH5 : WT ;bitpos:[5] ;default: 1'b0 ; */
|
|
|
-/*description: This register is used to reset the clock divider of CHANNEL$m..*/
|
|
|
-#define RMT_REF_CNT_RST_CH5 (BIT(5))
|
|
|
-#define RMT_REF_CNT_RST_CH5_M (BIT(5))
|
|
|
-#define RMT_REF_CNT_RST_CH5_V 0x1
|
|
|
-#define RMT_REF_CNT_RST_CH5_S 5
|
|
|
-/* RMT_REF_CNT_RST_CH4 : WT ;bitpos:[4] ;default: 1'b0 ; */
|
|
|
-/*description: This register is used to reset the clock divider of CHANNEL$m..*/
|
|
|
-#define RMT_REF_CNT_RST_CH4 (BIT(4))
|
|
|
-#define RMT_REF_CNT_RST_CH4_M (BIT(4))
|
|
|
-#define RMT_REF_CNT_RST_CH4_V 0x1
|
|
|
-#define RMT_REF_CNT_RST_CH4_S 4
|
|
|
-/* RMT_REF_CNT_RST_CH3 : WT ;bitpos:[3] ;default: 1'b0 ; */
|
|
|
-/*description: This register is used to reset the clock divider of CHANNEL$n..*/
|
|
|
-#define RMT_REF_CNT_RST_CH3 (BIT(3))
|
|
|
-#define RMT_REF_CNT_RST_CH3_M (BIT(3))
|
|
|
-#define RMT_REF_CNT_RST_CH3_V 0x1
|
|
|
-#define RMT_REF_CNT_RST_CH3_S 3
|
|
|
-/* RMT_REF_CNT_RST_CH2 : WT ;bitpos:[2] ;default: 1'b0 ; */
|
|
|
-/*description: This register is used to reset the clock divider of CHANNEL$n..*/
|
|
|
-#define RMT_REF_CNT_RST_CH2 (BIT(2))
|
|
|
-#define RMT_REF_CNT_RST_CH2_M (BIT(2))
|
|
|
-#define RMT_REF_CNT_RST_CH2_V 0x1
|
|
|
-#define RMT_REF_CNT_RST_CH2_S 2
|
|
|
-/* RMT_REF_CNT_RST_CH1 : WT ;bitpos:[1] ;default: 1'b0 ; */
|
|
|
-/*description: This register is used to reset the clock divider of CHANNEL$n..*/
|
|
|
-#define RMT_REF_CNT_RST_CH1 (BIT(1))
|
|
|
-#define RMT_REF_CNT_RST_CH1_M (BIT(1))
|
|
|
-#define RMT_REF_CNT_RST_CH1_V 0x1
|
|
|
-#define RMT_REF_CNT_RST_CH1_S 1
|
|
|
-/* RMT_REF_CNT_RST_CH0 : WT ;bitpos:[0] ;default: 1'b0 ; */
|
|
|
-/*description: This register is used to reset the clock divider of CHANNEL$n..*/
|
|
|
+/** RMT_REF_CNT_RST_REG register
|
|
|
+ * RMT clock divider reset register
|
|
|
+ */
|
|
|
+#define RMT_REF_CNT_RST_REG (DR_REG_RMT_BASE + 0xc8)
|
|
|
+/** RMT_REF_CNT_RST_CH0 : WT; bitpos: [0]; default: 0;
|
|
|
+ * This register is used to reset the clock divider of CHANNEL0.
|
|
|
+ */
|
|
|
#define RMT_REF_CNT_RST_CH0 (BIT(0))
|
|
|
-#define RMT_REF_CNT_RST_CH0_M (BIT(0))
|
|
|
-#define RMT_REF_CNT_RST_CH0_V 0x1
|
|
|
+#define RMT_REF_CNT_RST_CH0_M (RMT_REF_CNT_RST_CH0_V << RMT_REF_CNT_RST_CH0_S)
|
|
|
+#define RMT_REF_CNT_RST_CH0_V 0x00000001U
|
|
|
#define RMT_REF_CNT_RST_CH0_S 0
|
|
|
+/** RMT_REF_CNT_RST_CH1 : WT; bitpos: [1]; default: 0;
|
|
|
+ * This register is used to reset the clock divider of CHANNEL1.
|
|
|
+ */
|
|
|
+#define RMT_REF_CNT_RST_CH1 (BIT(1))
|
|
|
+#define RMT_REF_CNT_RST_CH1_M (RMT_REF_CNT_RST_CH1_V << RMT_REF_CNT_RST_CH1_S)
|
|
|
+#define RMT_REF_CNT_RST_CH1_V 0x00000001U
|
|
|
+#define RMT_REF_CNT_RST_CH1_S 1
|
|
|
+/** RMT_REF_CNT_RST_CH2 : WT; bitpos: [2]; default: 0;
|
|
|
+ * This register is used to reset the clock divider of CHANNEL2.
|
|
|
+ */
|
|
|
+#define RMT_REF_CNT_RST_CH2 (BIT(2))
|
|
|
+#define RMT_REF_CNT_RST_CH2_M (RMT_REF_CNT_RST_CH2_V << RMT_REF_CNT_RST_CH2_S)
|
|
|
+#define RMT_REF_CNT_RST_CH2_V 0x00000001U
|
|
|
+#define RMT_REF_CNT_RST_CH2_S 2
|
|
|
+/** RMT_REF_CNT_RST_CH3 : WT; bitpos: [3]; default: 0;
|
|
|
+ * This register is used to reset the clock divider of CHANNEL3.
|
|
|
+ */
|
|
|
+#define RMT_REF_CNT_RST_CH3 (BIT(3))
|
|
|
+#define RMT_REF_CNT_RST_CH3_M (RMT_REF_CNT_RST_CH3_V << RMT_REF_CNT_RST_CH3_S)
|
|
|
+#define RMT_REF_CNT_RST_CH3_V 0x00000001U
|
|
|
+#define RMT_REF_CNT_RST_CH3_S 3
|
|
|
+/** RMT_REF_CNT_RST_CH4 : WT; bitpos: [4]; default: 0;
|
|
|
+ * This register is used to reset the clock divider of CHANNEL4.
|
|
|
+ */
|
|
|
+#define RMT_REF_CNT_RST_CH4 (BIT(4))
|
|
|
+#define RMT_REF_CNT_RST_CH4_M (RMT_REF_CNT_RST_CH4_V << RMT_REF_CNT_RST_CH4_S)
|
|
|
+#define RMT_REF_CNT_RST_CH4_V 0x00000001U
|
|
|
+#define RMT_REF_CNT_RST_CH4_S 4
|
|
|
+/** RMT_REF_CNT_RST_CH5 : WT; bitpos: [5]; default: 0;
|
|
|
+ * This register is used to reset the clock divider of CHANNEL5.
|
|
|
+ */
|
|
|
+#define RMT_REF_CNT_RST_CH5 (BIT(5))
|
|
|
+#define RMT_REF_CNT_RST_CH5_M (RMT_REF_CNT_RST_CH5_V << RMT_REF_CNT_RST_CH5_S)
|
|
|
+#define RMT_REF_CNT_RST_CH5_V 0x00000001U
|
|
|
+#define RMT_REF_CNT_RST_CH5_S 5
|
|
|
+/** RMT_REF_CNT_RST_CH6 : WT; bitpos: [6]; default: 0;
|
|
|
+ * This register is used to reset the clock divider of CHANNEL6.
|
|
|
+ */
|
|
|
+#define RMT_REF_CNT_RST_CH6 (BIT(6))
|
|
|
+#define RMT_REF_CNT_RST_CH6_M (RMT_REF_CNT_RST_CH6_V << RMT_REF_CNT_RST_CH6_S)
|
|
|
+#define RMT_REF_CNT_RST_CH6_V 0x00000001U
|
|
|
+#define RMT_REF_CNT_RST_CH6_S 6
|
|
|
+/** RMT_REF_CNT_RST_CH7 : WT; bitpos: [7]; default: 0;
|
|
|
+ * This register is used to reset the clock divider of CHANNEL7.
|
|
|
+ */
|
|
|
+#define RMT_REF_CNT_RST_CH7 (BIT(7))
|
|
|
+#define RMT_REF_CNT_RST_CH7_M (RMT_REF_CNT_RST_CH7_V << RMT_REF_CNT_RST_CH7_S)
|
|
|
+#define RMT_REF_CNT_RST_CH7_V 0x00000001U
|
|
|
+#define RMT_REF_CNT_RST_CH7_S 7
|
|
|
|
|
|
-#define RMT_DATE_REG (DR_REG_RMT_BASE + 0xCC)
|
|
|
-/* RMT_DATE : R/W ;bitpos:[27:0] ;default: 28'h2101181 ; */
|
|
|
-/*description: This is the version register..*/
|
|
|
-#define RMT_DATE 0x0FFFFFFF
|
|
|
-#define RMT_DATE_M ((RMT_DATE_V)<<(RMT_DATE_S))
|
|
|
-#define RMT_DATE_V 0xFFFFFFF
|
|
|
+/** RMT_DATE_REG register
|
|
|
+ * RMT version register
|
|
|
+ */
|
|
|
+#define RMT_DATE_REG (DR_REG_RMT_BASE + 0xcc)
|
|
|
+/** RMT_DATE : R/W; bitpos: [27:0]; default: 34607489;
|
|
|
+ * This is the version register.
|
|
|
+ */
|
|
|
+#define RMT_DATE 0x0FFFFFFFU
|
|
|
+#define RMT_DATE_M (RMT_DATE_V << RMT_DATE_S)
|
|
|
+#define RMT_DATE_V 0x0FFFFFFFU
|
|
|
#define RMT_DATE_S 0
|
|
|
|
|
|
-
|
|
|
#ifdef __cplusplus
|
|
|
}
|
|
|
#endif
|
|
|
-
|
|
|
-
|
|
|
-
|
|
|
-#endif /*_SOC_RMT_REG_H_ */
|
morris