Component/bt: support OOB in SMP

components/bt/bluedroid/api/esp_gap_ble_api.c

@@ -598,6 +598,29 @@ esp_err_t esp_ble_get_bond_device_list(int *dev_num, esp_ble_bond_dev_t *dev_lis
 
     return (ret == BT_STATUS_SUCCESS ? ESP_OK : ESP_FAIL);
 }
+
+esp_err_t esp_ble_oob_req_reply(esp_bd_addr_t bd_addr, uint8_t *TK, uint8_t len)
+{
+    if(len != ESP_BT_OCTET16_LEN) {
+        return ESP_ERR_INVALID_ARG;
+    }
+
+    btc_msg_t msg;
+    btc_ble_gap_args_t arg;
+
+    ESP_BLUEDROID_STATUS_CHECK(ESP_BLUEDROID_STATUS_ENABLED);
+
+    msg.sig = BTC_SIG_API_CALL;
+    msg.pid = BTC_PID_GAP_BLE;
+    msg.act = BTC_GAP_BLE_OOB_REQ_REPLY_EVT;
+    memcpy(arg.oob_req_reply.bd_addr, bd_addr, ESP_BD_ADDR_LEN);
+    arg.oob_req_reply.len = len;
+    arg.oob_req_reply.p_value = TK;
+
+    return (btc_transfer_context(&msg, &arg, sizeof(btc_ble_gap_args_t), btc_gap_ble_arg_deep_copy)
+            == BT_STATUS_SUCCESS ? ESP_OK : ESP_FAIL);
+}
+
 #endif /* #if (SMP_INCLUDED == TRUE) */
 
 esp_err_t esp_ble_gap_disconnect(esp_bd_addr_t remote_device)

components/bt/bluedroid/api/include/api/esp_gap_ble_api.h

@@ -54,6 +54,7 @@ typedef uint8_t esp_ble_key_type_t;
 #define ESP_LE_AUTH_NO_BOND                 0x00                                     /*!< 0*/                     /* relate to BTM_LE_AUTH_NO_BOND in stack/btm_api.h */
 #define ESP_LE_AUTH_BOND                    0x01                                     /*!< 1 << 0 */               /* relate to BTM_LE_AUTH_BOND in stack/btm_api.h */
 #define ESP_LE_AUTH_REQ_MITM                (1 << 2)                                 /*!< 1 << 2 */               /* relate to BTM_LE_AUTH_REQ_MITM in stack/btm_api.h */
+#define ESP_LE_AUTH_REQ_BOND_MITM           (ESP_LE_AUTH_BOND | ESP_LE_AUTH_REQ_MITM)/*!< 0101*/
 #define ESP_LE_AUTH_REQ_SC_ONLY             (1 << 3)                                 /*!< 1 << 3 */               /* relate to BTM_LE_AUTH_REQ_SC_ONLY in stack/btm_api.h */
 #define ESP_LE_AUTH_REQ_SC_BOND             (ESP_LE_AUTH_BOND | ESP_LE_AUTH_REQ_SC_ONLY)            /*!< 1001 */  /* relate to BTM_LE_AUTH_REQ_SC_BOND in stack/btm_api.h */
 #define ESP_LE_AUTH_REQ_SC_MITM             (ESP_LE_AUTH_REQ_MITM | ESP_LE_AUTH_REQ_SC_ONLY)        /*!< 1100 */  /* relate to BTM_LE_AUTH_REQ_SC_MITM in stack/btm_api.h */
@@ -63,6 +64,9 @@ typedef uint8_t   esp_ble_auth_req_t;         /*!< combination of the above bit
 #define ESP_BLE_ONLY_ACCEPT_SPECIFIED_AUTH_DISABLE 0
 #define ESP_BLE_ONLY_ACCEPT_SPECIFIED_AUTH_ENABLE  1
 
+#define ESP_BLE_OOB_DISABLE 0
+#define ESP_BLE_OOB_ENABLE  1
+
 /* relate to BTM_IO_CAP_xxx in stack/btm_api.h */
 #define ESP_IO_CAP_OUT                      0   /*!< DisplayOnly */         /* relate to BTM_IO_CAP_OUT in stack/btm_api.h */
 #define ESP_IO_CAP_IO                       1   /*!< DisplayYesNo */        /* relate to BTM_IO_CAP_IO in stack/btm_api.h */
@@ -270,6 +274,7 @@ typedef enum {
     ESP_BLE_SM_SET_STATIC_PASSKEY,
     ESP_BLE_SM_CLEAR_STATIC_PASSKEY,
     ESP_BLE_SM_ONLY_ACCEPT_SPECIFIED_SEC_AUTH,
+    ESP_BLE_SM_OOB_SUPPORT,
     ESP_BLE_SM_MAX_PARAM,
 } esp_ble_sm_param_t;
 
@@ -1116,6 +1121,20 @@ int esp_ble_get_bond_device_num(void);
 */
 esp_err_t esp_ble_get_bond_device_list(int *dev_num, esp_ble_bond_dev_t *dev_list);
 
+/**
+* @brief           This function is called to provide the OOB data for
+*                  SMP in response to ESP_GAP_BLE_OOB_REQ_EVT
+*
+* @param[in]       bd_addr: BD address of the peer device.
+* @param[in]       TK: TK value, the TK value shall be a 128-bit random number
+* @param[in]       len: length of tk, should always be 128-bit
+*
+* @return          - ESP_OK : success
+*                  - other  : failed
+*
+*/
+esp_err_t esp_ble_oob_req_reply(esp_bd_addr_t bd_addr, uint8_t *TK, uint8_t len);
+
 #endif /* #if (SMP_INCLUDED == TRUE) */
 
 /**

components/bt/bluedroid/bta/dm/bta_dm_act.c

@@ -1150,6 +1150,21 @@ void bta_dm_loc_oob(tBTA_DM_MSG *p_data)
     BTM_ReadLocalOobData();
 }
 
+/*******************************************************************************
+**
+** Function         bta_dm_oob_reply
+**
+** Description      This function is called to provide the OOB data for
+**                  SMP in response to BLE OOB request.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_oob_reply(tBTA_DM_MSG *p_data) 
+{
+    BTM_BleOobDataReply(p_data->oob_reply.bd_addr, BTM_SUCCESS, p_data->oob_reply.len, p_data->oob_reply.value);
+}
+
 /*******************************************************************************
 **
 ** Function         bta_dm_ci_io_req_act

components/bt/bluedroid/bta/dm/bta_dm_api.c

@@ -510,6 +510,36 @@ void BTA_DmLocalOob(void)
         bta_sys_sendmsg(p_msg);
     }
 }
+
+/*******************************************************************************
+**
+** Function         BTA_DmOobReply
+**
+**                  This function is called to provide the OOB data for
+**                  SMP in response to BTM_LE_OOB_REQ_EVT
+**
+** Parameters:      bd_addr     - Address of the peer device
+**                  len         - length of simple pairing Randomizer  C
+**                  p_value     - simple pairing Randomizer  C.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmOobReply(BD_ADDR bd_addr, UINT8 len, UINT8 *p_value)
+{
+    tBTA_DM_API_OOB_REPLY    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_OOB_REPLY *) osi_malloc(sizeof(tBTA_DM_API_OOB_REPLY))) != NULL) {
+        p_msg->hdr.event = BTA_DM_API_OOB_REPLY_EVT;
+        if(p_value == NULL || len > BT_OCTET16_LEN) {
+            return;
+        }
+        memcpy(p_msg->bd_addr, bd_addr, BD_ADDR_LEN);
+        p_msg->len = len;
+        memcpy(p_msg->value, p_value, len);
+        bta_sys_sendmsg(p_msg);
+    }
+}
 #endif /* BTM_OOB_INCLUDED */
 /*******************************************************************************
 **

components/bt/bluedroid/bta/dm/bta_dm_co.c

@@ -35,6 +35,9 @@
 #define BTM_BLE_ONLY_ACCEPT_SPECIFIED_SEC_AUTH_DISABLE 0
 #define BTM_BLE_ONLY_ACCEPT_SPECIFIED_SEC_AUTH_ENABLE  1
 
+#define BTM_BLE_OOB_DISABLE  0
+#define BTM_BLE_OOB_ENABLE   1
+
 tBTE_APPL_CFG bte_appl_cfg = {
 #if SMP_INCLUDED == TRUE
     BTA_LE_AUTH_REQ_SC_MITM_BOND, // Authentication requirements
@@ -45,7 +48,8 @@ tBTE_APPL_CFG bte_appl_cfg = {
     BTM_BLE_INITIATOR_KEY_SIZE,
     BTM_BLE_RESPONDER_KEY_SIZE,
     BTM_BLE_MAX_KEY_SIZE,
-    BTM_BLE_ONLY_ACCEPT_SPECIFIED_SEC_AUTH_DISABLE
+    BTM_BLE_ONLY_ACCEPT_SPECIFIED_SEC_AUTH_DISABLE,
+    BTM_BLE_OOB_DISABLE,
 };
 #endif
 
@@ -338,12 +342,16 @@ void bta_dm_co_ble_io_req(BD_ADDR bd_addr,  tBTA_IO_CAP *p_io_cap,
      * If the answer can not be obtained right away,
      * set *p_oob_data to BTA_OOB_UNKNOWN and call bta_dm_ci_io_req() when the answer is available */
 
-    *p_oob_data = FALSE;
+    *p_oob_data = bte_appl_cfg.oob_support;
 
     /* *p_auth_req by default is FALSE for devices with NoInputNoOutput; TRUE for other devices. */
 
     *p_auth_req = bte_appl_cfg.ble_auth_req | (bte_appl_cfg.ble_auth_req & BTA_LE_AUTH_REQ_MITM) | ((*p_auth_req) & BTA_LE_AUTH_REQ_MITM);
 
+    if (*p_oob_data == BTM_BLE_OOB_ENABLE) {
+        *p_auth_req = (*p_auth_req)&(~BTA_LE_AUTH_REQ_SC_ONLY);
+    }
+
     if (bte_appl_cfg.ble_io_cap <= 4) {
         *p_io_cap = bte_appl_cfg.ble_io_cap;
     }
@@ -433,5 +441,16 @@ UINT8 bta_dm_co_ble_get_auth_req(void)
     return 0;
 }
 
+void bta_dm_co_ble_oob_support(UINT8 enable)
+{
+#if (SMP_INCLUDED == TRUE)
+    if (enable) {
+        bte_appl_cfg.oob_support = BTM_BLE_OOB_ENABLE;
+    } else {
+        bte_appl_cfg.oob_support = BTM_BLE_OOB_DISABLE;
+    }
+#endif  ///SMP_INCLUDED == TRUE
+}
+
 #endif
 

components/bt/bluedroid/bta/dm/bta_dm_main.c

@@ -82,6 +82,7 @@ const tBTA_DM_ACTION bta_dm_action[BTA_DM_MAX_EVT] = {
 #endif  ///SMP_INCLUDED == TRUE
 #if (BTM_OOB_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
     bta_dm_loc_oob,                         /* BTA_DM_API_LOC_OOB_EVT */
+    bta_dm_oob_reply,                       /* BTA_DM_API_OOB_REPLY_EVT */
     bta_dm_ci_io_req_act,                   /* BTA_DM_CI_IO_REQ_EVT */
     bta_dm_ci_rmt_oob_act,                  /* BTA_DM_CI_RMT_OOB_EVT */
 #endif /* BTM_OOB_INCLUDED */

components/bt/bluedroid/bta/dm/include/bta_dm_int.h

@@ -79,6 +79,7 @@ enum {
 #endif  ///SMP_INCLUDED == TRUE
 #if (BTM_OOB_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
     BTA_DM_API_LOC_OOB_EVT,
+    BTA_DM_API_OOB_REPLY_EVT,
     BTA_DM_CI_IO_REQ_EVT,
     BTA_DM_CI_RMT_OOB_EVT,
 #endif /* BTM_OOB_INCLUDED */
@@ -298,6 +299,14 @@ typedef struct {
     BT_HDR      hdr;
 } tBTA_DM_API_LOC_OOB;
 
+/* data type for BTA_DM_API_OOB_REPLY_EVT */
+typedef struct {
+    BT_HDR      hdr;
+    BD_ADDR bd_addr;
+    UINT8       len;
+    UINT8       value[BT_OCTET16_LEN];
+} tBTA_DM_API_OOB_REPLY;
+
 /* data type for BTA_DM_API_CONFIRM_EVT */
 typedef struct {
     BT_HDR      hdr;
@@ -779,6 +788,7 @@ typedef union {
     tBTA_DM_API_PIN_REPLY pin_reply;
 
     tBTA_DM_API_LOC_OOB     loc_oob;
+    tBTA_DM_API_OOB_REPLY   oob_reply;
     tBTA_DM_API_CONFIRM     confirm;
     tBTA_DM_API_KEY_REQ     key_req;
     tBTA_DM_CI_IO_REQ       ci_io_req;
@@ -1266,6 +1276,7 @@ extern void bta_dm_confirm(tBTA_DM_MSG *p_data);
 extern void bta_dm_key_req(tBTA_DM_MSG *p_data);
 #if (BTM_OOB_INCLUDED == TRUE)
 extern void bta_dm_loc_oob(tBTA_DM_MSG *p_data);
+extern void bta_dm_oob_reply(tBTA_DM_MSG *p_data);
 extern void bta_dm_ci_io_req_act(tBTA_DM_MSG *p_data);
 extern void bta_dm_ci_rmt_oob_act(tBTA_DM_MSG *p_data);
 #endif /* BTM_OOB_INCLUDED */

components/bt/bluedroid/bta/include/bta/bta_api.h

@@ -1611,6 +1611,22 @@ extern void BTA_DmPinReply(BD_ADDR bd_addr, BOOLEAN accept, UINT8 pin_len,
 **
 *******************************************************************************/
 extern void BTA_DmLocalOob(void);
+
+/*******************************************************************************
+**
+** Function         BTA_DmOobReply
+**
+**                  This function is called to provide the OOB data for
+**                  SMP in response to BTM_LE_OOB_REQ_EVT
+**
+** Parameters:      bd_addr     - Address of the peer device
+**                  len         - length of simple pairing Randomizer  C
+**                  p_value     - simple pairing Randomizer  C.
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void BTA_DmOobReply(BD_ADDR bd_addr, UINT8 len, UINT8 *p_value);
 #endif /* BTM_OOB_INCLUDED */
 
 /*******************************************************************************

components/bt/bluedroid/bta/include/bta/bta_dm_co.h

@@ -210,4 +210,6 @@ extern void bta_dm_co_ble_set_accept_auth_enable(UINT8 enable);
 extern UINT8 bta_dm_co_ble_get_accept_auth_enable(void);
 
 extern UINT8 bta_dm_co_ble_get_auth_req(void);
+
+extern void bta_dm_co_ble_oob_support(UINT8 enable);
 #endif

components/bt/bluedroid/btc/profile/std/gap/btc_gap_ble.c

@@ -931,6 +931,21 @@ void btc_gap_ble_arg_deep_copy(btc_msg_t *msg, void *p_dest, void *p_src)
         }
         break;
     }
+    case BTC_GAP_BLE_OOB_REQ_REPLY_EVT: {
+        btc_ble_gap_args_t *src = (btc_ble_gap_args_t *)p_src;
+        btc_ble_gap_args_t  *dst = (btc_ble_gap_args_t *) p_dest;
+        uint8_t length = 0;
+        if (src->oob_req_reply.p_value) {
+            length = dst->oob_req_reply.len;
+            dst->oob_req_reply.p_value = osi_malloc(length);
+            if (dst->oob_req_reply.p_value != NULL) {
+                memcpy(dst->oob_req_reply.p_value, src->oob_req_reply.p_value, length);
+            } else {
+                BTC_TRACE_ERROR("%s %d no mem\n",__func__, msg->act);
+            }
+        }
+        break;
+    }
     default:
         BTC_TRACE_ERROR("Unhandled deep copy %d\n", msg->act);
         break;
@@ -986,6 +1001,13 @@ void btc_gap_ble_arg_deep_free(btc_msg_t *msg)
         }
         break;
     }
+    case BTC_GAP_BLE_OOB_REQ_REPLY_EVT: {
+        uint8_t *value = ((btc_ble_gap_args_t *)msg->arg)->oob_req_reply.p_value;
+        if (value) {
+            osi_free(value);
+        }
+        break;
+    }
     default:
         BTC_TRACE_DEBUG("Unhandled deep free %d\n", msg->act);
         break;
@@ -1144,6 +1166,12 @@ void btc_gap_ble_call_handler(btc_msg_t *msg)
                 bta_dm_co_ble_set_accept_auth_enable(enable);
                 break;
             }
+            case ESP_BLE_SM_OOB_SUPPORT: {
+                uint8_t enable = 0;
+                STREAM_TO_UINT8(enable, value);
+                bta_dm_co_ble_oob_support(enable);
+                break;
+            }
             default:
                 break;
         }
@@ -1174,6 +1202,9 @@ void btc_gap_ble_call_handler(btc_msg_t *msg)
         BTA_DmRemoveDevice(bd_addr, BT_TRANSPORT_LE);
         break;
     }
+    case BTC_GAP_BLE_OOB_REQ_REPLY_EVT:
+        BTA_DmOobReply(arg->oob_req_reply.bd_addr, arg->oob_req_reply.len, arg->oob_req_reply.p_value);
+        break;
 #endif  ///SMP_INCLUDED == TRUE
     case BTC_GAP_BLE_DISCONNECT_EVT:
         btc_ble_disconnect(arg->disconnect.remote_device);

components/bt/bluedroid/btc/profile/std/include/btc_gap_ble.h

@@ -46,6 +46,7 @@ typedef enum {
     BTC_GAP_BLE_CONFIRM_REPLY_EVT,
     BTC_GAP_BLE_DISCONNECT_EVT,
     BTC_GAP_BLE_REMOVE_BOND_DEV_EVT,
+    BTC_GAP_BLE_OOB_REQ_REPLY_EVT,
 } btc_gap_ble_act_t;
 
 /* btc_ble_gap_args_t */
@@ -144,6 +145,12 @@ typedef union {
         esp_bd_addr_t bd_addr;
         bool accept;
     } enc_comfirm_replay;
+    //BTC_GAP_BLE_OOB_DATA_REPLY_EVT
+    struct oob_req_reply_args {
+        esp_bd_addr_t bd_addr;
+        uint8_t len;
+        uint8_t *p_value;
+    } oob_req_reply;
     //BTC_GAP_BLE_DISCONNECT_EVT
     struct disconnect_args {
         esp_bd_addr_t remote_device;

components/bt/bluedroid/common/include/common/bte_appl.h

@@ -32,6 +32,7 @@ typedef struct {
     UINT8   ble_resp_key;
     UINT8   ble_max_key_size;
     UINT8   ble_accept_auth_enable;
+    UINT8   oob_support;
 #endif
 
 } tBTE_APPL_CFG;

examples/bluetooth/gatt_security_client/main/example_ble_sec_gattc_demo.c

@@ -139,6 +139,9 @@ static char *esp_auth_req_to_str(esp_ble_auth_req_t auth_req)
     case ESP_LE_AUTH_REQ_MITM:
         auth_str = "ESP_LE_AUTH_REQ_MITM";
         break;
+    case ESP_LE_AUTH_REQ_BOND_MITM:
+        auth_str = "ESP_LE_AUTH_REQ_BOND_MITM";
+        break;
     case ESP_LE_AUTH_REQ_SC_ONLY:
         auth_str = "ESP_LE_AUTH_REQ_SC_ONLY";
         break;
@@ -384,9 +387,12 @@ static void esp_gap_cb(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *par
         //esp_ble_passkey_reply(gl_profile_tab[PROFILE_A_APP_ID].remote_bda, true, 0x00);
         ESP_LOGI(GATTC_TAG, "ESP_GAP_BLE_PASSKEY_REQ_EVT");
         break;
-    case ESP_GAP_BLE_OOB_REQ_EVT:                                /* OOB request event */
+    case ESP_GAP_BLE_OOB_REQ_EVT: {
         ESP_LOGI(GATTC_TAG, "ESP_GAP_BLE_OOB_REQ_EVT");
+        uint8_t tk[16] = {1}; //If you paired with OOB, both devices need to use the same tk
+        esp_ble_oob_req_reply(param->ble_security.ble_req.bd_addr, tk, sizeof(tk));
         break;
+    }
     case ESP_GAP_BLE_LOCAL_IR_EVT:                               /* BLE local IR event */
         ESP_LOGI(GATTC_TAG, "ESP_GAP_BLE_LOCAL_IR_EVT");
         break;
@@ -563,14 +569,16 @@ void app_main()
     }
 
     /* set the security iocap & auth_req & key size & init key response key parameters to the stack*/
-    esp_ble_auth_req_t auth_req = ESP_LE_AUTH_BOND;     //bonding with peer device after authentication
+    esp_ble_auth_req_t auth_req = ESP_LE_AUTH_REQ_SC_MITM_BOND;     //bonding with peer device after authentication
     esp_ble_io_cap_t iocap = ESP_IO_CAP_NONE;           //set the IO capability to No output No input
     uint8_t key_size = 16;      //the key size should be 7~16 bytes
     uint8_t init_key = ESP_BLE_ENC_KEY_MASK | ESP_BLE_ID_KEY_MASK;
     uint8_t rsp_key = ESP_BLE_ENC_KEY_MASK | ESP_BLE_ID_KEY_MASK;
+    uint8_t oob_support = ESP_BLE_OOB_DISABLE;
     esp_ble_gap_set_security_param(ESP_BLE_SM_AUTHEN_REQ_MODE, &auth_req, sizeof(uint8_t));
     esp_ble_gap_set_security_param(ESP_BLE_SM_IOCAP_MODE, &iocap, sizeof(uint8_t));
     esp_ble_gap_set_security_param(ESP_BLE_SM_MAX_KEY_SIZE, &key_size, sizeof(uint8_t));
+    esp_ble_gap_set_security_param(ESP_BLE_SM_OOB_SUPPORT, &oob_support, sizeof(uint8_t));
     /* If your BLE device act as a Slave, the init_key means you hope which types of key of the master should distribut to you,
     and the response key means which key you can distribut to the Master;
     If your BLE device act as a master, the response key means you hope which types of key of the slave should distribut to you,

examples/bluetooth/gatt_security_server/main/example_ble_sec_gatts_demo.c

@@ -240,6 +240,9 @@ static char *esp_auth_req_to_str(esp_ble_auth_req_t auth_req)
     case ESP_LE_AUTH_REQ_MITM:
         auth_str = "ESP_LE_AUTH_REQ_MITM";
         break;
+    case ESP_LE_AUTH_REQ_BOND_MITM:
+        auth_str = "ESP_LE_AUTH_REQ_BOND_MITM";
+        break;
     case ESP_LE_AUTH_REQ_SC_ONLY:
         auth_str = "ESP_LE_AUTH_REQ_SC_ONLY";
         break;
@@ -318,9 +321,12 @@ static void gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param
         ESP_LOGI(GATTS_TABLE_TAG, "ESP_GAP_BLE_PASSKEY_REQ_EVT");
         //esp_ble_passkey_reply(heart_rate_profile_tab[HEART_PROFILE_APP_IDX].remote_bda, true, 0x00);
         break;
-    case ESP_GAP_BLE_OOB_REQ_EVT:                                /* OOB request event */
+    case ESP_GAP_BLE_OOB_REQ_EVT: {
         ESP_LOGI(GATTS_TABLE_TAG, "ESP_GAP_BLE_OOB_REQ_EVT");
+        uint8_t tk[16] = {1}; //If you paired with OOB, both devices need to use the same tk
+        esp_ble_oob_req_reply(param->ble_security.ble_req.bd_addr, tk, sizeof(tk));
         break;
+    }
     case ESP_GAP_BLE_LOCAL_IR_EVT:                               /* BLE local IR event */
         ESP_LOGI(GATTS_TABLE_TAG, "ESP_GAP_BLE_LOCAL_IR_EVT");
         break;
@@ -553,7 +559,7 @@ void app_main()
     }
 
     /* set the security iocap & auth_req & key size & init key response key parameters to the stack*/
-    esp_ble_auth_req_t auth_req = ESP_LE_AUTH_BOND;     //bonding with peer device after authentication
+    esp_ble_auth_req_t auth_req = ESP_LE_AUTH_REQ_SC_MITM_BOND;     //bonding with peer device after authentication
     esp_ble_io_cap_t iocap = ESP_IO_CAP_NONE;           //set the IO capability to No output No input
     uint8_t key_size = 16;      //the key size should be 7~16 bytes
     uint8_t init_key = ESP_BLE_ENC_KEY_MASK | ESP_BLE_ID_KEY_MASK;
@@ -561,11 +567,13 @@ void app_main()
     //set static passkey
     uint32_t passkey = 123456;
     uint8_t auth_option = ESP_BLE_ONLY_ACCEPT_SPECIFIED_AUTH_DISABLE;
+    uint8_t oob_support = ESP_BLE_OOB_DISABLE;
     esp_ble_gap_set_security_param(ESP_BLE_SM_SET_STATIC_PASSKEY, &passkey, sizeof(uint32_t));
     esp_ble_gap_set_security_param(ESP_BLE_SM_AUTHEN_REQ_MODE, &auth_req, sizeof(uint8_t));
     esp_ble_gap_set_security_param(ESP_BLE_SM_IOCAP_MODE, &iocap, sizeof(uint8_t));
     esp_ble_gap_set_security_param(ESP_BLE_SM_MAX_KEY_SIZE, &key_size, sizeof(uint8_t));
     esp_ble_gap_set_security_param(ESP_BLE_SM_ONLY_ACCEPT_SPECIFIED_SEC_AUTH, &auth_option, sizeof(uint8_t));
+    esp_ble_gap_set_security_param(ESP_BLE_SM_OOB_SUPPORT, &oob_support, sizeof(uint8_t));
     /* If your BLE device act as a Slave, the init_key means you hope which types of key of the master should distribut to you,
     and the response key means which key you can distribut to the Master;
     If your BLE device act as a master, the response key means you hope which types of key of the slave should distribut to you,