soc_caps: since esp32c6 only support one ext wakeup src, split SOC_PM_SUPPORT_EXT_WAKEUP

Close IDF-5924

components/esp_hw_support/include/esp_sleep.h

@@ -193,8 +193,7 @@ touch_pad_t esp_sleep_get_touchpad_wakeup_status(void);
  */
 bool esp_sleep_is_valid_wakeup_gpio(gpio_num_t gpio_num);
 
-#if SOC_PM_SUPPORT_EXT_WAKEUP
-
+#if SOC_PM_SUPPORT_EXT0_WAKEUP
 /**
  * @brief Enable wakeup using a pin
  *
@@ -223,7 +222,9 @@ bool esp_sleep_is_valid_wakeup_gpio(gpio_num_t gpio_num);
  *      - ESP_ERR_INVALID_STATE if wakeup triggers conflict
  */
 esp_err_t esp_sleep_enable_ext0_wakeup(gpio_num_t gpio_num, int level);
+#endif // SOC_PM_SUPPORT_EXT0_WAKEUP
 
+#if SOC_PM_SUPPORT_EXT1_WAKEUP
 /**
  * @brief Enable wakeup using multiple pins
  *
@@ -259,7 +260,7 @@ esp_err_t esp_sleep_enable_ext0_wakeup(gpio_num_t gpio_num, int level);
  */
 esp_err_t esp_sleep_enable_ext1_wakeup(uint64_t mask, esp_sleep_ext1_wakeup_mode_t mode);
 
-#endif // SOC_PM_SUPPORT_EXT_WAKEUP
+#endif // SOC_PM_SUPPORT_EXT1_WAKEUP
 
 #if SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP
 /**

components/esp_hw_support/sleep_modes.c

@@ -207,8 +207,10 @@ void esp_sleep_periph_use_8m(bool use_or_not)
 }
 
 static uint32_t get_power_down_flags(void);
-#if SOC_PM_SUPPORT_EXT_WAKEUP
+#if SOC_PM_SUPPORT_EXT0_WAKEUP
 static void ext0_wakeup_prepare(void);
+#endif
+#if SOC_PM_SUPPORT_EXT1_WAKEUP
 static void ext1_wakeup_prepare(void);
 #endif
 static void timer_wakeup_prepare(void);
@@ -433,11 +435,13 @@ static uint32_t IRAM_ATTR esp_sleep_start(uint32_t pd_flags, esp_sleep_mode_t mo
     rtc_clk_cpu_freq_get_config(&cpu_freq_config);
     rtc_clk_cpu_freq_set_xtal();
 
-#if SOC_PM_SUPPORT_EXT_WAKEUP
+#if SOC_PM_SUPPORT_EXT0_WAKEUP
     // Configure pins for external wakeup
     if (s_config.wakeup_triggers & RTC_EXT0_TRIG_EN) {
         ext0_wakeup_prepare();
     }
+#endif
+#if SOC_PM_SUPPORT_EXT1_WAKEUP
     if (s_config.wakeup_triggers & RTC_EXT1_TRIG_EN) {
         ext1_wakeup_prepare();
     }
@@ -928,11 +932,13 @@ esp_err_t esp_sleep_disable_wakeup_source(esp_sleep_source_t source)
     } else if (CHECK_SOURCE(source, ESP_SLEEP_WAKEUP_TIMER, RTC_TIMER_TRIG_EN)) {
         s_config.wakeup_triggers &= ~RTC_TIMER_TRIG_EN;
         s_config.sleep_duration = 0;
-#if SOC_PM_SUPPORT_EXT_WAKEUP
+#if SOC_PM_SUPPORT_EXT0_WAKEUP
     } else if (CHECK_SOURCE(source, ESP_SLEEP_WAKEUP_EXT0, RTC_EXT0_TRIG_EN)) {
         s_config.ext0_rtc_gpio_num = 0;
         s_config.ext0_trigger_level = 0;
         s_config.wakeup_triggers &= ~RTC_EXT0_TRIG_EN;
+#endif
+#if SOC_PM_SUPPORT_EXT1_WAKEUP
     } else if (CHECK_SOURCE(source, ESP_SLEEP_WAKEUP_EXT1, RTC_EXT1_TRIG_EN)) {
         s_config.ext1_rtc_gpio_mask = 0;
         s_config.ext1_trigger_mode = 0;
@@ -1071,8 +1077,7 @@ bool esp_sleep_is_valid_wakeup_gpio(gpio_num_t gpio_num)
 #endif // SOC_RTCIO_INPUT_OUTPUT_SUPPORTED
 }
 
-#if SOC_PM_SUPPORT_EXT_WAKEUP
-
+#if SOC_PM_SUPPORT_EXT0_WAKEUP
 esp_err_t esp_sleep_enable_ext0_wakeup(gpio_num_t gpio_num, int level)
 {
     if (level < 0 || level > 1) {
@@ -1101,7 +1106,9 @@ static void ext0_wakeup_prepare(void)
     rtcio_hal_function_select(rtc_gpio_num, RTCIO_FUNC_RTC);
     rtcio_hal_input_enable(rtc_gpio_num);
 }
+#endif // SOC_PM_SUPPORT_EXT0_WAKEUP
 
+#if SOC_PM_SUPPORT_EXT1_WAKEUP
 esp_err_t esp_sleep_enable_ext1_wakeup(uint64_t mask, esp_sleep_ext1_wakeup_mode_t mode)
 {
     if (mode > ESP_EXT1_WAKEUP_ANY_HIGH) {
@@ -1339,9 +1346,11 @@ esp_sleep_wakeup_cause_t esp_sleep_get_wakeup_cause(void)
         return ESP_SLEEP_WAKEUP_GPIO;
     } else if (wakeup_cause & (RTC_UART0_TRIG_EN | RTC_UART1_TRIG_EN)) {
         return ESP_SLEEP_WAKEUP_UART;
-#if SOC_PM_SUPPORT_EXT_WAKEUP
+#if SOC_PM_SUPPORT_EXT0_WAKEUP
     } else if (wakeup_cause & RTC_EXT0_TRIG_EN) {
         return ESP_SLEEP_WAKEUP_EXT0;
+#endif
+#if SOC_PM_SUPPORT_EXT1_WAKEUP
     } else if (wakeup_cause & RTC_EXT1_TRIG_EN) {
         return ESP_SLEEP_WAKEUP_EXT1;
 #endif

components/esp_system/test_apps/esp_system_unity_tests/main/test_sleep.c

@@ -386,7 +386,7 @@ TEST_CASE_MULTIPLE_STAGES("can set sleep wake stub from stack in RTC RAM", "[dee
 
 #if SOC_RTCIO_INPUT_OUTPUT_SUPPORTED
 
-#if SOC_PM_SUPPORT_EXT_WAKEUP
+#if SOC_PM_SUPPORT_EXT0_WAKEUP
 TEST_CASE("wake up using ext0 (13 high)", "[deepsleep][ignore]")
 {
     ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
@@ -404,7 +404,9 @@ TEST_CASE("wake up using ext0 (13 low)", "[deepsleep][ignore]")
     ESP_ERROR_CHECK(esp_sleep_enable_ext0_wakeup(GPIO_NUM_13, ESP_EXT0_WAKEUP_LEVEL_LOW));
     esp_deep_sleep_start();
 }
+#endif // SOC_PM_SUPPORT_EXT0_WAKEUP
 
+#if SOC_PM_SUPPORT_EXT1_WAKEUP
 TEST_CASE("wake up using ext1 when RTC_PERIPH is off (13 high)", "[deepsleep][ignore]")
 {
     // This test needs external pulldown
@@ -440,7 +442,7 @@ TEST_CASE("wake up using ext1 when RTC_PERIPH is on (13 low)", "[deepsleep][igno
     ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ALL_LOW));
     esp_deep_sleep_start();
 }
-#endif // SOC_PM_SUPPORT_EXT_WAKEUP
+#endif // SOC_PM_SUPPORT_EXT1_WAKEUP
 
 __attribute__((unused)) static float get_time_ms(void)
 {

components/hal/include/hal/rtc_hal.h

@@ -39,7 +39,7 @@ typedef struct rtc_cntl_sleep_retent {
 
 #define RTC_HAL_DMA_LINK_NODE_SIZE      (16)
 
-#if SOC_PM_SUPPORT_EXT_WAKEUP
+#if SOC_PM_SUPPORT_EXT1_WAKEUP
 
 #define rtc_hal_ext1_get_wakeup_status()                  rtc_cntl_ll_ext1_get_wakeup_status()
 
@@ -51,7 +51,7 @@ typedef struct rtc_cntl_sleep_retent {
 
 #define rtc_hal_ext1_get_wakeup_pins()                    rtc_cntl_ll_ext1_get_wakeup_pins()
 
-#endif
+#endif // SOC_PM_SUPPORT_EXT1_WAKEUP
 
 #if SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP
 

components/soc/esp32/include/soc/Kconfig.soc_caps.in

@@ -719,6 +719,14 @@ config SOC_PHY_DIG_REGS_MEM_SIZE
     int
     default 21
 
+config SOC_PM_SUPPORT_EXT0_WAKEUP
+    bool
+    default y
+
+config SOC_PM_SUPPORT_EXT1_WAKEUP
+    bool
+    default y
+
 config SOC_PM_SUPPORT_EXT_WAKEUP
     bool
     default y

components/soc/esp32/include/soc/soc_caps.h

@@ -365,7 +365,10 @@
 #define SOC_PHY_DIG_REGS_MEM_SIZE       (21*4)
 
 /*-------------------------- Power Management CAPS ---------------------------*/
-#define SOC_PM_SUPPORT_EXT_WAKEUP                 (1)
+#define SOC_PM_SUPPORT_EXT0_WAKEUP                (1)
+#define SOC_PM_SUPPORT_EXT1_WAKEUP                (1)
+#define SOC_PM_SUPPORT_EXT_WAKEUP                 (1)     /*!<Compatible to the old version of IDF */
+
 #define SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP        (1)     /*!<Supports waking up from touch pad trigger */
 #define SOC_PM_SUPPORT_RTC_PERIPH_PD              (1)
 #define SOC_PM_SUPPORT_RTC_FAST_MEM_PD            (1)

components/soc/esp32c6/include/soc/Kconfig.soc_caps.in

@@ -1031,6 +1031,10 @@ config SOC_PM_SUPPORT_BT_WAKEUP
     bool
     default y
 
+config SOC_PM_SUPPORT_EXT1_WAKEUP
+    bool
+    default y
+
 config SOC_PM_SUPPORT_CPU_PD
     bool
     default y

components/soc/esp32c6/include/soc/soc_caps.h

@@ -436,6 +436,7 @@
 /*-------------------------- Power Management CAPS ----------------------------*/
 #define SOC_PM_SUPPORT_WIFI_WAKEUP      (1)
 #define SOC_PM_SUPPORT_BT_WAKEUP        (1)
+#define SOC_PM_SUPPORT_EXT1_WAKEUP      (1)
 #define SOC_PM_SUPPORT_CPU_PD           (1)
 #define SOC_PM_SUPPORT_MODEM_PD         (1)
 #define SOC_PM_SUPPORT_XTAL32K_PD       (1)

components/soc/esp32s2/include/soc/Kconfig.soc_caps.in

@@ -951,6 +951,14 @@ config SOC_SPI_MEM_SUPPORT_WRAP
     bool
     default y
 
+config SOC_PM_SUPPORT_EXT0_WAKEUP
+    bool
+    default y
+
+config SOC_PM_SUPPORT_EXT1_WAKEUP
+    bool
+    default y
+
 config SOC_PM_SUPPORT_EXT_WAKEUP
     bool
     default y

components/soc/esp32s2/include/soc/soc_caps.h

@@ -414,7 +414,10 @@
 #define SOC_SPI_MEM_SUPPORT_WRAP                          (1)
 
 /*-------------------------- Power Management CAPS ---------------------------*/
-#define SOC_PM_SUPPORT_EXT_WAKEUP                 (1)
+#define SOC_PM_SUPPORT_EXT0_WAKEUP                (1)
+#define SOC_PM_SUPPORT_EXT1_WAKEUP                (1)
+#define SOC_PM_SUPPORT_EXT_WAKEUP                 (1)     /*!<Compatible to the old version of IDF */
+
 #define SOC_PM_SUPPORT_WIFI_WAKEUP                (1)
 #define SOC_PM_SUPPORT_WIFI_PD                    (1)
 #define SOC_PM_SUPPORT_RTC_PERIPH_PD              (1)

components/soc/esp32s3/include/soc/Kconfig.soc_caps.in

@@ -983,6 +983,14 @@ config SOC_AES_SUPPORT_AES_256
     bool
     default y
 
+config SOC_PM_SUPPORT_EXT0_WAKEUP
+    bool
+    default y
+
+config SOC_PM_SUPPORT_EXT1_WAKEUP
+    bool
+    default y
+
 config SOC_PM_SUPPORT_EXT_WAKEUP
     bool
     default y

components/soc/esp32s3/include/soc/soc_caps.h

@@ -404,7 +404,10 @@
 
 
 /*-------------------------- Power Management CAPS ---------------------------*/
-#define SOC_PM_SUPPORT_EXT_WAKEUP       (1)
+#define SOC_PM_SUPPORT_EXT0_WAKEUP      (1)
+#define SOC_PM_SUPPORT_EXT1_WAKEUP      (1)
+#define SOC_PM_SUPPORT_EXT_WAKEUP       (1)     /*!<Compatible to the old version of IDF */
+
 #define SOC_PM_SUPPORT_WIFI_WAKEUP      (1)
 #define SOC_PM_SUPPORT_BT_WAKEUP        (1)
 #define SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP    (1)     /*!<Supports waking up from touch pad trigger */

docs/docs_not_updated/esp32c6.txt

@@ -36,7 +36,6 @@ api-reference/network/esp-wifi-mesh
 api-reference/network/esp_smartconfig
 api-reference/network/esp_wifi
 api-reference/network/index
-api-reference/system/sleep_modes
 api-reference/system/ulp_macros
 api-reference/system/ulp
 api-reference/system/efuse

docs/en/api-reference/system/power_management.rst

@@ -42,7 +42,7 @@ Dynamic frequency scaling (DFS) and automatic light sleep can be enabled in an a
 
   In light sleep, peripherals are clock gated, and interrupts (from GPIOs and internal peripherals) will not be generated. A wakeup source described in the :doc:`sleep_modes` documentation can be used to trigger wakeup from the light sleep state.
 
-.. only:: SOC_PM_SUPPORT_EXT_WAKEUP
+.. only:: SOC_PM_SUPPORT_EXT0_WAKEUP or SOC_PM_SUPPORT_EXT1_WAKEUP
 
   For example, the EXT0 and EXT1 wakeup sources can be used to wake up the chip via a GPIO.
 

docs/en/api-reference/system/sleep_modes.rst

@@ -71,7 +71,7 @@ RTC peripherals or RTC memories don't need to be powered on during sleep in this
 
     :cpp:func:`esp_sleep_enable_touchpad_wakeup` function can be used to enable this wakeup source.
 
-.. only:: SOC_PM_SUPPORT_EXT_WAKEUP
+.. only:: SOC_PM_SUPPORT_EXT0_WAKEUP or SOC_PM_SUPPORT_EXT1_WAKEUP
 
     External Wakeup (ext0)
     ^^^^^^^^^^^^^^^^^^^^^^
@@ -127,11 +127,11 @@ RTC peripherals or RTC memories don't need to be powered on during sleep in this
     GPIO Wakeup (Light-sleep Only)
     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-    .. only:: SOC_PM_SUPPORT_EXT_WAKEUP
+    .. only:: (SOC_PM_SUPPORT_EXT0_WAKEUP or SOC_PM_SUPPORT_EXT1_WAKEUP)
 
         In addition to EXT0 and EXT1 wakeup sources described above, one more method of wakeup from external inputs is available in Light-sleep mode. With this wakeup source, each pin can be individually configured to trigger wakeup on high or low level using :cpp:func:`gpio_wakeup_enable` function. Unlike EXT0 and EXT1 wakeup sources, which can only be used with RTC IOs, this wakeup source can be used with any IO (RTC or digital).
 
-    .. only:: not SOC_PM_SUPPORT_EXT_WAKEUP
+    .. only:: not (SOC_PM_SUPPORT_EXT0_WAKEUP or SOC_PM_SUPPORT_EXT1_WAKEUP)
 
         One more method of wakeup from external inputs is available in Light-sleep mode. With this wakeup source, each pin can be individually configured to trigger wakeup on high or low level using :cpp:func:`gpio_wakeup_enable` function. This wakeup source can be used with any IO (RTC or digital).
 
@@ -257,7 +257,7 @@ Checking Sleep Wakeup Cause
 
     For touchpad, it is possible to identify which touch pin has caused wakeup using :cpp:func:`esp_sleep_get_touchpad_wakeup_status` functions.
 
-.. only:: SOC_PM_SUPPORT_EXT_WAKEUP
+.. only:: SOC_PM_SUPPORT_EXT1_WAKEUP
 
     For ext1 wakeup sources, it is possible to identify which touch pin has caused wakeup using :cpp:func:`esp_sleep_get_ext1_wakeup_status` functions.
 

docs/zh_CN/api-reference/system/power_management.rst

@@ -42,7 +42,7 @@ ESP-IDF 中集成的电源管理算法可以根据应用程序组件的需求，
 
   Light-sleep 状态下，外设设有时钟门控，不会产生来自 GPIO 和内部外设的中断。:doc:`sleep_modes` 文档中所提到的唤醒源可用于从 Light-sleep 状态触发唤醒。
 
-.. only:: SOC_PM_SUPPORT_EXT_WAKEUP
+.. only:: SOC_PM_SUPPORT_EXT0_WAKEUP or SOC_PM_SUPPORT_EXT1_WAKEUP
 
   例如，EXT0 和 EXT1 唤醒源可以通过 GPIO 唤醒芯片。
 

docs/zh_CN/api-reference/system/sleep_modes.rst

@@ -71,7 +71,7 @@ RTC 控制器中内嵌定时器，可用于在预定义的时间到达后唤醒
 
     可调用 :cpp:func:`esp_sleep_enable_touchpad_wakeup` 函数来启用该唤醒源。
 
-.. only:: SOC_PM_SUPPORT_EXT_WAKEUP
+.. only:: SOC_PM_SUPPORT_EXT0_WAKEUP or SOC_PM_SUPPORT_EXT1_WAKEUP
 
     外部唤醒 (ext0)
     ^^^^^^^^^^^^^^^^^^^^^^
@@ -127,11 +127,11 @@ RTC 控制器中内嵌定时器，可用于在预定义的时间到达后唤醒
     GPIO 唤醒（仅适用于 Light-sleep 模式）
     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-    .. only:: SOC_PM_SUPPORT_EXT_WAKEUP
+    .. only:: SOC_PM_SUPPORT_EXT0_WAKEUP or SOC_PM_SUPPORT_EXT1_WAKEUP
 
         除了上述 EXT0 和 EXT1 唤醒源之外，还有一种从外部唤醒 Light-sleep 模式的方法——使用函数 :cpp:func:`gpio_wakeup_enable`。启用该唤醒源后，可将每个管脚单独配置为在高电平或低电平时唤醒。EXT0 和 EXT1 唤醒源只能用于 RTC IO，但此唤醒源既可以用于 RTC IO，可也用于数字 IO。
 
-    .. only:: not SOC_PM_SUPPORT_EXT_WAKEUP
+    .. only:: not (SOC_PM_SUPPORT_EXT0_WAKEUP or SOC_PM_SUPPORT_EXT1_WAKEUP)
 
        此外，还有一种从外部唤醒 Light-sleep 模式的方法。启用该唤醒源后，可将每个管脚单独配置为在高电平或低电平时调用 :cpp:func:`gpio_wakeup_enable` 函数触发唤醒。此唤醒源既可以用于 RTC IO，可也用于数字 IO。
 
@@ -257,7 +257,7 @@ UART 输出处理
 
     对于触摸传感器唤醒源，可以调用函数 :cpp:func:`esp_sleep_get_touchpad_wakeup_status` 来确认触发唤醒的触摸管脚。
 
-.. only:: SOC_PM_SUPPORT_EXT_WAKEUP
+.. only:: SOC_PM_SUPPORT_EXT1_WAKEUP
 
     对于 ext1 唤醒源，可以调用函数 :cpp:func:`esp_sleep_get_ext1_wakeup_status` 来确认触发唤醒的触摸管脚。
 

examples/bluetooth/nimble/throughput_app/blecent_throughput/components/cmd_system/cmd_system.c

@@ -216,7 +216,7 @@ static int deep_sleep(int argc, char **argv)
         ESP_LOGI(TAG, "Enabling wakeup on GPIO%d, wakeup on %s level",
                  io_num, level ? "HIGH" : "LOW");
 
-#if SOC_PM_SUPPORT_EXT_WAKEUP
+#if SOC_PM_SUPPORT_EXT1_WAKEUP
         ESP_ERROR_CHECK( esp_sleep_enable_ext1_wakeup(1ULL << io_num, level) );
 #endif
     }

examples/system/console/advanced/components/cmd_system/cmd_system.c

@@ -224,7 +224,7 @@ static void register_tasks(void)
 
 static struct {
     struct arg_int *wakeup_time;
-#if SOC_PM_SUPPORT_EXT_WAKEUP
+#if SOC_PM_SUPPORT_EXT0_WAKEUP || SOC_PM_SUPPORT_EXT1_WAKEUP
     struct arg_int *wakeup_gpio_num;
     struct arg_int *wakeup_gpio_level;
 #endif
@@ -245,7 +245,7 @@ static int deep_sleep(int argc, char **argv)
         ESP_ERROR_CHECK( esp_sleep_enable_timer_wakeup(timeout) );
     }
 
-#if SOC_PM_SUPPORT_EXT_WAKEUP
+#if SOC_PM_SUPPORT_EXT1_WAKEUP
     if (deep_sleep_args.wakeup_gpio_num->count) {
         int io_num = deep_sleep_args.wakeup_gpio_num->ival[0];
         if (!esp_sleep_is_valid_wakeup_gpio(io_num)) {
@@ -266,7 +266,7 @@ static int deep_sleep(int argc, char **argv)
         ESP_ERROR_CHECK( esp_sleep_enable_ext1_wakeup(1ULL << io_num, level) );
         ESP_LOGE(TAG, "GPIO wakeup from deep sleep currently unsupported on ESP32-C3");
     }
-#endif // SOC_PM_SUPPORT_EXT_WAKEUP
+#endif // SOC_PM_SUPPORT_EXT1_WAKEUP
 
 #if CONFIG_IDF_TARGET_ESP32
     rtc_gpio_isolate(GPIO_NUM_12);
@@ -280,7 +280,7 @@ static void register_deep_sleep(void)
     int num_args = 1;
     deep_sleep_args.wakeup_time =
         arg_int0("t", "time", "<t>", "Wake up time, ms");
-#if SOC_PM_SUPPORT_EXT_WAKEUP
+#if SOC_PM_SUPPORT_EXT0_WAKEUP || SOC_PM_SUPPORT_EXT1_WAKEUP
     deep_sleep_args.wakeup_gpio_num =
         arg_int0(NULL, "io", "<n>",
                  "If specified, wakeup using GPIO with given number");
@@ -293,7 +293,7 @@ static void register_deep_sleep(void)
     const esp_console_cmd_t cmd = {
         .command = "deep_sleep",
         .help = "Enter deep sleep mode. "
-#if SOC_PM_SUPPORT_EXT_WAKEUP
+#if SOC_PM_SUPPORT_EXT0_WAKEUP || SOC_PM_SUPPORT_EXT1_WAKEUP
         "Two wakeup modes are supported: timer and GPIO. "
 #else
         "Timer wakeup mode is supported. "

examples/system/deep_sleep/main/Kconfig.projbuild

@@ -15,7 +15,7 @@ menu "Example Configuration"
         bool "Enable wakeup from GPIO (ext0)"
         default y if !IDF_TARGET_ESP32
         default n if IDF_TARGET_ESP32
-        depends on SOC_PM_SUPPORT_EXT_WAKEUP
+        depends on SOC_PM_SUPPORT_EXT0_WAKEUP
         help
             This option enables wake up from deep sleep from GPIO25(ESP32)/GPIO3(ESP32S2,S3). The pin should be
             connected to LOW to avoid being in a floating state. When triggering a wake up, connect the pin to HIGH.
@@ -26,7 +26,7 @@ menu "Example Configuration"
     config EXAMPLE_EXT1_WAKEUP
         bool "Enable wakeup from GPIO (ext1)"
         default y
-        depends on SOC_PM_SUPPORT_EXT_WAKEUP
+        depends on SOC_PM_SUPPORT_EXT1_WAKEUP
         help
             This option enables wake up from deep sleep from GPIO2 and GPIO4. They should be connected to LOW to avoid
             floating pins. When triggering a wake up, connect one or both of the pins to HIGH. Note that floating