Merge branch 'docs/fix_UART_default_pin_error_and_provide_a_link_to_ESP_PROG_v4.3' into 'release/v4.3'

docs: fix uart default pin error and provide more information about ESP-Prog board (v4.3)

See merge request espressif/esp-idf!13968

docs/en/api-guides/jtag-debugging/index.rst

@@ -314,9 +314,17 @@ Related Documents
 -----------------
 
 .. toctree::
+    :hidden:
+    
     :maxdepth: 1
 
     using-debugger
     debugging-examples
     tips-and-quirks
     ../app_trace
+
+- :doc:`using-debugger`
+- :doc:`debugging-examples`
+- :doc:`tips-and-quirks`
+- :doc:`../app_trace`
+- `Introduction to ESP-Prog Board <https://docs.espressif.com/projects/espressif-esp-iot-solution/en/latest/hw-reference/ESP-Prog_guide.html>`__ 

docs/en/api-reference/peripherals/uart.rst

@@ -105,7 +105,7 @@ The same macro should be specified for pins that will not be used.
 
   .. code-block:: c
 
-    // Set UART pins(TX: IO16 (UART2 default), RX: IO17 (UART2 default), RTS: IO18, CTS: IO19)
+    // Set UART pins(TX: IO17 (UART2 default), RX: IO16 (UART2 default), RTS: IO18, CTS: IO19)
     ESP_ERROR_CHECK(uart_set_pin(UART_NUM_2, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, 18, 19));
 
 .. only:: esp32s2

docs/en/get-started/establish-serial-connection.rst

@@ -11,32 +11,13 @@ Connect {IDF_TARGET_NAME} to PC
 
 Connect the {IDF_TARGET_NAME} board to the PC using the USB cable. If device driver does not install automatically, identify USB to serial converter chip on your {IDF_TARGET_NAME} board (or external converter dongle), search for drivers in internet and install them.
 
-Below are the links to drivers for {IDF_TARGET_NAME} boards produced by Espressif:
 
-.. only:: esp32
-
-    .. csv-table::
-        :header: Development Board, USB Driver, Remarks
-        :widths: 40, 20, 40
-
-        :ref:`ESP32-DevKitC <esp-modules-and-boards-esp32-devkitc>`,  `CP210x`_
-        `ESP32-LyraT <https://www.espressif.com/en/products/hardware/esp32-lyrat>`_, `CP210x`_
-        `ESP32-LyraTD-MSC <https://www.espressif.com/en/products/hardware/esp32-lyratd-msc>`_, `CP210x`_
-        :ref:`ESP32-PICO-KIT <esp-modules-and-boards-esp32-pico-kit>`, `CP210x`_
-        :ref:`ESP-WROVER-KIT <esp-modules-and-boards-esp-wrover-kit>`, `FTDI`_
-        :ref:`ESP32 Demo Board <esp-modules-and-boards-esp32-demo-board>`, `FTDI`_
-        `ESP-Prog`_, `FTDI`_, Programmer board (w/o ESP32)
-        `ESP32-MeshKit-Sense <https://github.com/espressif/esp-dev-kits/blob/master/esp32-meshkit-sensor/docs/ESP32-MeshKit-Sense_guide_en.md>`_, n/a, Use with `ESP-Prog`_
-        `ESP32-Sense-Kit <https://github.com/espressif/esp-dev-kits/blob/master/esp32-sense-kit/docs/esp32_sense_kit_guide_en.md>`_, n/a, Use with `ESP-Prog`_
-
-    .. _CP210x: https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
-    .. _FTDI: https://www.ftdichip.com/Drivers/VCP.htm
-    .. _ESP-Prog: https://github.com/espressif/esp-dev-kits/blob/master/esp-prog/docs/ESP-Prog_guide_en.md
+Below is the list of USB to serial converter chips installed on most of the {IDF_TARGET_NAME} boards produced by Espressif together with links to the drivers:
 
 * CP210x: `CP210x USB to UART Bridge VCP Drivers <https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers>`_
 * FTDI: `FTDI Virtual COM Port Drivers <https://www.ftdichip.com/Drivers/VCP.htm>`_
 
-The drivers above are primarily for reference. Under normal circumstances, the drivers should be bundled with an operating system and automatically installed upon connecting one of the listed boards to the PC.
+Please check the board user guide for specific USB to serial converter chip used. The drivers above are primarily for reference. Under normal circumstances, the drivers should be bundled with an operating system and automatically installed upon connecting the board to the PC.
 
 
 Check port on Windows

docs/zh_CN/api-guides/jtag-debugging/index.rst

@@ -295,9 +295,17 @@ Windows 用户:
 --------
 
 .. toctree::
+    :hidden:
+    
     :maxdepth: 1
 
     using-debugger
     debugging-examples
     tips-and-quirks
     ../app_trace
+
+- :doc:`using-debugger`
+- :doc:`debugging-examples`
+- :doc:`tips-and-quirks`
+- :doc:`../app_trace`
+- `ESP-Prog 调试板介绍 <https://docs.espressif.com/projects/espressif-esp-iot-solution/zh_CN/latest/hw-reference/ESP-Prog_guide.html>`__ 

docs/zh_CN/get-started/establish-serial-connection.rst

@@ -13,30 +13,10 @@
 
 以下是乐鑫 {IDF_TARGET_NAME} 开发板驱动程序的链接：
 
-.. only:: esp32
-
-    .. csv-table::
-        :header: 开发板, USB 驱动, 备注
-        :widths: 40, 20, 40
-
-        :ref:`ESP32-DevKitC <esp-modules-and-boards-esp32-devkitc>`,  `CP210x`_
-        `ESP32-LyraT <https://www.espressif.com/en/products/hardware/esp32-lyrat>`_, `CP210x`_
-        `ESP32-LyraTD-MSC <https://www.espressif.com/en/products/hardware/esp32-lyratd-msc>`_, `CP210x`_
-        :ref:`ESP32-PICO-KIT <esp-modules-and-boards-esp32-pico-kit>`, `CP210x`_
-        :ref:`ESP-WROVER-KIT <esp-modules-and-boards-esp-wrover-kit>`, `FTDI`_
-        :ref:`ESP32 Demo 板 <esp-modules-and-boards-esp32-demo-board>`, `FTDI`_
-        `ESP-Prog`_, `FTDI`_, 编程板 (w/o ESP32)
-        `ESP32-MeshKit-Sense <https://github.com/espressif/esp-dev-kits/blob/master/esp32-meshkit-sensor/docs/ESP32-MeshKit-Sense_guide_cn.md>`_, n/a, 搭配 `ESP-Prog`_ 使用
-        `ESP32-Sense-Kit <https://github.com/espressif/esp-dev-kits/blob/master/esp32-sense-kit/docs/esp32_sense_kit_guide_cn.md>`_, n/a, 搭配 `ESP-Prog`_ 使用
-
-.. _CP210x: https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
-.. _FTDI: https://www.ftdichip.com/Drivers/VCP.htm
-.. _ESP-Prog: https://github.com/espressif/esp-dev-kits/blob/master/esp-prog/docs/ESP-Prog_guide_cn.md
-
 * CP210x: `CP210x USB 至 UART 桥 VCP 驱动程序 <https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers>`_
 * FTDI: `FTDI 虚拟 COM 端口驱动程序 <https://www.ftdichip.com/Drivers/VCP.htm>`_
 
-以上驱动仅供参考。一般情况下，当上述任一 {IDF_TARGET_NAME} 开发板与 PC 连接时，对应驱动程序应该已经被打包在操作系统中，并已经自动安装。
+以上驱动仅供参考，请参考开发板用户指南，查看开发板具体使用的 USB 转串口芯片。一般情况下，当 {IDF_TARGET_NAME} 开发板与 PC 连接时，对应驱动程序应该已经被打包在操作系统中，并已经自动安装。
 
 在 Windows 上查看端口
 ---------------------