Merge branch 'bugfix/remove_c_series_chips_unsupported_efuse_field' into 'master'

efuse: free c3/h2  unused efuse field

See merge request espressif/esp-idf!16854

components/efuse/esp32c3/esp_efuse_table.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2017-2021 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2017-2022 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -9,7 +9,7 @@
 #include <assert.h>
 #include "esp_efuse_table.h"
 
-// md5_digest_table ef33779021404fbaddc878eefebaddc1
+// md5_digest_table 720eb12a076091cb1a236c15d9fa3308
 // This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
 // If you want to change some fields, you need to change esp_efuse_table.csv file
 // then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.
@@ -175,10 +175,6 @@ static const esp_efuse_desc_t DIS_FORCE_DOWNLOAD[] = {
     {EFUSE_BLK0, 44, 1}, 	 // Disable force chip go to download mode function,
 };
 
-static const esp_efuse_desc_t DIS_USB[] = {
-    {EFUSE_BLK0, 45, 1}, 	 // Disable USB function,
-};
-
 static const esp_efuse_desc_t DIS_CAN[] = {
     {EFUSE_BLK0, 46, 1}, 	 // Disable CAN function,
 };
@@ -295,10 +291,6 @@ static const esp_efuse_desc_t UART_PRINT_CHANNEL[] = {
     {EFUSE_BLK0, 130, 1}, 	 // 0: UART0. 1: UART1,
 };
 
-static const esp_efuse_desc_t FLASH_ECC_MODE[] = {
-    {EFUSE_BLK0, 131, 1}, 	 // Set this bit to set flsah ecc mode. 0:flash ecc 16to18 byte mode. 1:flash ecc 16to17 byte mode,
-};
-
 static const esp_efuse_desc_t DIS_USB_DOWNLOAD_MODE[] = {
     {EFUSE_BLK0, 132, 1}, 	 // Disable download through USB,
 };
@@ -311,22 +303,6 @@ static const esp_efuse_desc_t UART_PRINT_CONTROL[] = {
     {EFUSE_BLK0, 134, 2}, 	 // b00:force print. b01:control by GPIO8 - low level print. b10:control by GPIO8 - high level print. b11:force disable print.,
 };
 
-static const esp_efuse_desc_t PIN_POWER_SELECTION[] = {
-    {EFUSE_BLK0, 136, 1}, 	 // GPIO33-GPIO37 power supply selection in ROM code. 0:VDD3P3_CPU. 1:VDD_SPI.,
-};
-
-static const esp_efuse_desc_t FLASH_TYPE[] = {
-    {EFUSE_BLK0, 137, 1}, 	 // Connected Flash interface type. 0: 4 data line. 1: 8 data line,
-};
-
-static const esp_efuse_desc_t FLASH_PAGE_SIZE[] = {
-    {EFUSE_BLK0, 138, 2}, 	 // Flash page size,
-};
-
-static const esp_efuse_desc_t FLASH_ECC_EN[] = {
-    {EFUSE_BLK0, 140, 1}, 	 // Enable ECC for flash boot,
-};
-
 static const esp_efuse_desc_t FORCE_SEND_RESUME[] = {
     {EFUSE_BLK0, 141, 1}, 	 // Force ROM code to send a resume command during SPI boot,
 };
@@ -712,11 +688,6 @@ const esp_efuse_desc_t* ESP_EFUSE_DIS_FORCE_DOWNLOAD[] = {
     NULL
 };
 
-const esp_efuse_desc_t* ESP_EFUSE_DIS_USB[] = {
-    &DIS_USB[0],    		// Disable USB function
-    NULL
-};
-
 const esp_efuse_desc_t* ESP_EFUSE_DIS_CAN[] = {
     &DIS_CAN[0],    		// Disable CAN function
     NULL
@@ -862,11 +833,6 @@ const esp_efuse_desc_t* ESP_EFUSE_UART_PRINT_CHANNEL[] = {
     NULL
 };
 
-const esp_efuse_desc_t* ESP_EFUSE_FLASH_ECC_MODE[] = {
-    &FLASH_ECC_MODE[0],    		// Set this bit to set flsah ecc mode. 0:flash ecc 16to18 byte mode. 1:flash ecc 16to17 byte mode
-    NULL
-};
-
 const esp_efuse_desc_t* ESP_EFUSE_DIS_USB_DOWNLOAD_MODE[] = {
     &DIS_USB_DOWNLOAD_MODE[0],    		// Disable download through USB
     NULL
@@ -882,26 +848,6 @@ const esp_efuse_desc_t* ESP_EFUSE_UART_PRINT_CONTROL[] = {
     NULL
 };
 
-const esp_efuse_desc_t* ESP_EFUSE_PIN_POWER_SELECTION[] = {
-    &PIN_POWER_SELECTION[0],    		// GPIO33-GPIO37 power supply selection in ROM code. 0:VDD3P3_CPU. 1:VDD_SPI.
-    NULL
-};
-
-const esp_efuse_desc_t* ESP_EFUSE_FLASH_TYPE[] = {
-    &FLASH_TYPE[0],    		// Connected Flash interface type. 0: 4 data line. 1: 8 data line
-    NULL
-};
-
-const esp_efuse_desc_t* ESP_EFUSE_FLASH_PAGE_SIZE[] = {
-    &FLASH_PAGE_SIZE[0],    		// Flash page size
-    NULL
-};
-
-const esp_efuse_desc_t* ESP_EFUSE_FLASH_ECC_EN[] = {
-    &FLASH_ECC_EN[0],    		// Enable ECC for flash boot
-    NULL
-};
-
 const esp_efuse_desc_t* ESP_EFUSE_FORCE_SEND_RESUME[] = {
     &FORCE_SEND_RESUME[0],    		// Force ROM code to send a resume command during SPI boot
     NULL

components/efuse/esp32c3/esp_efuse_table.csv

@@ -55,7 +55,6 @@
         DIS_DOWNLOAD_ICACHE,              EFUSE_BLK0,   42,    1,     Disable Icache in download mode
         DIS_USB_DEVICE,                   EFUSE_BLK0,   43,    1,     Disable USB_DEVICE
         DIS_FORCE_DOWNLOAD,               EFUSE_BLK0,   44,    1,     Disable force chip go to download mode function
-        DIS_USB,                          EFUSE_BLK0,   45,    1,     Disable USB function
         DIS_CAN,                          EFUSE_BLK0,   46,    1,     Disable CAN function
         JTAG_SEL_ENABLE,                  EFUSE_BLK0,   47,    1,     Set this bit to enable selection between usb_to_jtag and pad_to_jtag through strapping gpio10 when both reg_dis_usb_jtag and reg_dis_pad_jtag are equal to 0.
         SOFT_DIS_JTAG,                    EFUSE_BLK0,   48,    3,     Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.
@@ -91,14 +90,9 @@
         DIS_DOWNLOAD_MODE,                EFUSE_BLK0,  128,    1,     Disble download mode include boot_mode[3:0] is 0 1 2 3 6 7
         DIS_LEGACY_SPI_BOOT,              EFUSE_BLK0,  129,    1,     Disable_Legcy_SPI_boot mode include boot_mode[3:0] is 4
         UART_PRINT_CHANNEL,               EFUSE_BLK0,  130,    1,     0: UART0. 1: UART1
-        FLASH_ECC_MODE,                   EFUSE_BLK0,  131,    1,     Set this bit to set flsah ecc mode. 0:flash ecc 16to18 byte mode. 1:flash ecc 16to17 byte mode
         DIS_USB_DOWNLOAD_MODE,            EFUSE_BLK0,  132,    1,     Disable download through USB
         ENABLE_SECURITY_DOWNLOAD,         EFUSE_BLK0,  133,    1,     Enable security download mode
         UART_PRINT_CONTROL,               EFUSE_BLK0,  134,    2,     b00:force print. b01:control by GPIO8 - low level print. b10:control by GPIO8 - high level print. b11:force disable print.
-        PIN_POWER_SELECTION,              EFUSE_BLK0,  136,    1,     GPIO33-GPIO37 power supply selection in ROM code. 0:VDD3P3_CPU. 1:VDD_SPI.
-        FLASH_TYPE,                       EFUSE_BLK0,  137,    1,     Connected Flash interface type. 0: 4 data line. 1: 8 data line
-        FLASH_PAGE_SIZE,                  EFUSE_BLK0,  138,    2,     Flash page size
-        FLASH_ECC_EN,                     EFUSE_BLK0,  140,    1,     Enable ECC for flash boot
         FORCE_SEND_RESUME,                EFUSE_BLK0,  141,    1,     Force ROM code to send a resume command during SPI boot
         SECURE_VERSION,                   EFUSE_BLK0,  142,   16,     Secure version for anti-rollback
 

components/efuse/esp32c3/include/esp_efuse_table.h

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2017-2021 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2017-2022 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -9,7 +9,7 @@ extern "C" {
 #endif
 
 
-// md5_digest_table ef33779021404fbaddc878eefebaddc1
+// md5_digest_table 720eb12a076091cb1a236c15d9fa3308
 // This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
 // If you want to change some fields, you need to change esp_efuse_table.csv file
 // then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.
@@ -56,7 +56,6 @@ extern const esp_efuse_desc_t* ESP_EFUSE_DIS_USB_JTAG[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_DOWNLOAD_ICACHE[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_USB_DEVICE[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_FORCE_DOWNLOAD[];
-extern const esp_efuse_desc_t* ESP_EFUSE_DIS_USB[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_CAN[];
 extern const esp_efuse_desc_t* ESP_EFUSE_JTAG_SEL_ENABLE[];
 extern const esp_efuse_desc_t* ESP_EFUSE_SOFT_DIS_JTAG[];
@@ -86,14 +85,9 @@ extern const esp_efuse_desc_t* ESP_EFUSE_FLASH_TPUW[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_DOWNLOAD_MODE[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_LEGACY_SPI_BOOT[];
 extern const esp_efuse_desc_t* ESP_EFUSE_UART_PRINT_CHANNEL[];
-extern const esp_efuse_desc_t* ESP_EFUSE_FLASH_ECC_MODE[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_USB_DOWNLOAD_MODE[];
 extern const esp_efuse_desc_t* ESP_EFUSE_ENABLE_SECURITY_DOWNLOAD[];
 extern const esp_efuse_desc_t* ESP_EFUSE_UART_PRINT_CONTROL[];
-extern const esp_efuse_desc_t* ESP_EFUSE_PIN_POWER_SELECTION[];
-extern const esp_efuse_desc_t* ESP_EFUSE_FLASH_TYPE[];
-extern const esp_efuse_desc_t* ESP_EFUSE_FLASH_PAGE_SIZE[];
-extern const esp_efuse_desc_t* ESP_EFUSE_FLASH_ECC_EN[];
 extern const esp_efuse_desc_t* ESP_EFUSE_FORCE_SEND_RESUME[];
 extern const esp_efuse_desc_t* ESP_EFUSE_SECURE_VERSION[];
 extern const esp_efuse_desc_t* ESP_EFUSE_MAC_FACTORY[];

components/efuse/esp32h2/esp_efuse_table.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2017-2021 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2017-2022 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -9,7 +9,7 @@
 #include <assert.h>
 #include "esp_efuse_table.h"
 
-// md5_digest_table 8d520559b0ed30f0cef34704317f2815
+// md5_digest_table 2639eb7da0e777178c31231ea20a8cf8
 // This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
 // If you want to change some fields, you need to change esp_efuse_table.csv file
 // then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.
@@ -175,10 +175,6 @@ static const esp_efuse_desc_t DIS_FORCE_DOWNLOAD[] = {
     {EFUSE_BLK0, 44, 1}, 	 // Disable force chip go to download mode function,
 };
 
-static const esp_efuse_desc_t DIS_USB[] = {
-    {EFUSE_BLK0, 45, 1}, 	 // Disable USB function,
-};
-
 static const esp_efuse_desc_t DIS_TWAI[] = {
     {EFUSE_BLK0, 46, 1}, 	 // Disable TWAI function,
 };
@@ -295,10 +291,6 @@ static const esp_efuse_desc_t UART_PRINT_CHANNEL[] = {
     {EFUSE_BLK0, 130, 1}, 	 // 0: UART0. 1: UART1,
 };
 
-static const esp_efuse_desc_t FLASH_ECC_MODE[] = {
-    {EFUSE_BLK0, 131, 1}, 	 // Set this bit to set flsah ecc mode. 0:flash ecc 16to18 byte mode. 1:flash ecc 16to17 byte mode,
-};
-
 static const esp_efuse_desc_t DIS_USB_DOWNLOAD_MODE[] = {
     {EFUSE_BLK0, 132, 1}, 	 // Disable download through USB,
 };
@@ -311,22 +303,6 @@ static const esp_efuse_desc_t UART_PRINT_CONTROL[] = {
     {EFUSE_BLK0, 134, 2}, 	 // b00:force print. b01:control by GPIO8 - low level print. b10:control by GPIO8 - high level print. b11:force disable print.,
 };
 
-static const esp_efuse_desc_t PIN_POWER_SELECTION[] = {
-    {EFUSE_BLK0, 136, 1}, 	 // GPIO33-GPIO37 power supply selection in ROM code. 0:VDD3P3_CPU. 1:VDD_SPI.,
-};
-
-static const esp_efuse_desc_t FLASH_TYPE[] = {
-    {EFUSE_BLK0, 137, 1}, 	 // Connected Flash interface type. 0: 4 data line. 1: 8 data line,
-};
-
-static const esp_efuse_desc_t FLASH_PAGE_SIZE[] = {
-    {EFUSE_BLK0, 138, 2}, 	 // Flash page size,
-};
-
-static const esp_efuse_desc_t FLASH_ECC_EN[] = {
-    {EFUSE_BLK0, 140, 1}, 	 // Enable ECC for flash boot,
-};
-
 static const esp_efuse_desc_t FORCE_SEND_RESUME[] = {
     {EFUSE_BLK0, 141, 1}, 	 // Force ROM code to send a resume command during SPI boot,
 };
@@ -697,11 +673,6 @@ const esp_efuse_desc_t* ESP_EFUSE_DIS_FORCE_DOWNLOAD[] = {
     NULL
 };
 
-const esp_efuse_desc_t* ESP_EFUSE_DIS_USB[] = {
-    &DIS_USB[0],    		// Disable USB function
-    NULL
-};
-
 const esp_efuse_desc_t* ESP_EFUSE_DIS_TWAI[] = {
     &DIS_TWAI[0],    		// Disable TWAI function
     NULL
@@ -847,11 +818,6 @@ const esp_efuse_desc_t* ESP_EFUSE_UART_PRINT_CHANNEL[] = {
     NULL
 };
 
-const esp_efuse_desc_t* ESP_EFUSE_FLASH_ECC_MODE[] = {
-    &FLASH_ECC_MODE[0],    		// Set this bit to set flsah ecc mode. 0:flash ecc 16to18 byte mode. 1:flash ecc 16to17 byte mode
-    NULL
-};
-
 const esp_efuse_desc_t* ESP_EFUSE_DIS_USB_DOWNLOAD_MODE[] = {
     &DIS_USB_DOWNLOAD_MODE[0],    		// Disable download through USB
     NULL
@@ -867,26 +833,6 @@ const esp_efuse_desc_t* ESP_EFUSE_UART_PRINT_CONTROL[] = {
     NULL
 };
 
-const esp_efuse_desc_t* ESP_EFUSE_PIN_POWER_SELECTION[] = {
-    &PIN_POWER_SELECTION[0],    		// GPIO33-GPIO37 power supply selection in ROM code. 0:VDD3P3_CPU. 1:VDD_SPI.
-    NULL
-};
-
-const esp_efuse_desc_t* ESP_EFUSE_FLASH_TYPE[] = {
-    &FLASH_TYPE[0],    		// Connected Flash interface type. 0: 4 data line. 1: 8 data line
-    NULL
-};
-
-const esp_efuse_desc_t* ESP_EFUSE_FLASH_PAGE_SIZE[] = {
-    &FLASH_PAGE_SIZE[0],    		// Flash page size
-    NULL
-};
-
-const esp_efuse_desc_t* ESP_EFUSE_FLASH_ECC_EN[] = {
-    &FLASH_ECC_EN[0],    		// Enable ECC for flash boot
-    NULL
-};
-
 const esp_efuse_desc_t* ESP_EFUSE_FORCE_SEND_RESUME[] = {
     &FORCE_SEND_RESUME[0],    		// Force ROM code to send a resume command during SPI boot
     NULL

components/efuse/esp32h2/esp_efuse_table.csv

@@ -56,7 +56,6 @@
         DIS_DOWNLOAD_ICACHE,              EFUSE_BLK0,   42,    1,     Disable Icache in download mode
         DIS_USB_DEVICE,                   EFUSE_BLK0,   43,    1,     Disable USB_DEVICE
         DIS_FORCE_DOWNLOAD,               EFUSE_BLK0,   44,    1,     Disable force chip go to download mode function
-        DIS_USB,                          EFUSE_BLK0,   45,    1,     Disable USB function
         DIS_TWAI,                         EFUSE_BLK0,   46,    1,     Disable TWAI function
         JTAG_SEL_ENABLE,                  EFUSE_BLK0,   47,    1,     Set this bit to enable selection between usb_to_jtag and pad_to_jtag through strapping gpio10 when both reg_dis_usb_jtag and reg_dis_pad_jtag are equal to 0.
         SOFT_DIS_JTAG,                    EFUSE_BLK0,   48,    3,     Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.
@@ -92,14 +91,9 @@
         DIS_DOWNLOAD_MODE,                EFUSE_BLK0,  128,    1,     Disble download mode include boot_mode[3:0] is 0 1 2 3 6 7
         DIS_LEGACY_SPI_BOOT,              EFUSE_BLK0,  129,    1,     Disable_Legcy_SPI_boot mode include boot_mode[3:0] is 4
         UART_PRINT_CHANNEL,               EFUSE_BLK0,  130,    1,     0: UART0. 1: UART1
-        FLASH_ECC_MODE,                   EFUSE_BLK0,  131,    1,     Set this bit to set flsah ecc mode. 0:flash ecc 16to18 byte mode. 1:flash ecc 16to17 byte mode
         DIS_USB_DOWNLOAD_MODE,            EFUSE_BLK0,  132,    1,     Disable download through USB
         ENABLE_SECURITY_DOWNLOAD,         EFUSE_BLK0,  133,    1,     Enable security download mode
         UART_PRINT_CONTROL,               EFUSE_BLK0,  134,    2,     b00:force print. b01:control by GPIO8 - low level print. b10:control by GPIO8 - high level print. b11:force disable print.
-        PIN_POWER_SELECTION,              EFUSE_BLK0,  136,    1,     GPIO33-GPIO37 power supply selection in ROM code. 0:VDD3P3_CPU. 1:VDD_SPI.
-        FLASH_TYPE,                       EFUSE_BLK0,  137,    1,     Connected Flash interface type. 0: 4 data line. 1: 8 data line
-        FLASH_PAGE_SIZE,                  EFUSE_BLK0,  138,    2,     Flash page size
-        FLASH_ECC_EN,                     EFUSE_BLK0,  140,    1,     Enable ECC for flash boot
         FORCE_SEND_RESUME,                EFUSE_BLK0,  141,    1,     Force ROM code to send a resume command during SPI boot
         SECURE_VERSION,                   EFUSE_BLK0,  142,   16,     Secure version for anti-rollback
         BOOT_DISABLE_FAST_WAKE,           EFUSE_BLK0,  158,    1,     Fast verify on wake option in ROM for Secure Boot

components/efuse/esp32h2/include/esp_efuse_table.h

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2017-2021 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2017-2022 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -9,7 +9,7 @@ extern "C" {
 #endif
 
 
-// md5_digest_table 8d520559b0ed30f0cef34704317f2815
+// md5_digest_table 2639eb7da0e777178c31231ea20a8cf8
 // This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
 // If you want to change some fields, you need to change esp_efuse_table.csv file
 // then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.
@@ -56,7 +56,6 @@ extern const esp_efuse_desc_t* ESP_EFUSE_DIS_USB_JTAG[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_DOWNLOAD_ICACHE[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_USB_DEVICE[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_FORCE_DOWNLOAD[];
-extern const esp_efuse_desc_t* ESP_EFUSE_DIS_USB[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_TWAI[];
 extern const esp_efuse_desc_t* ESP_EFUSE_JTAG_SEL_ENABLE[];
 extern const esp_efuse_desc_t* ESP_EFUSE_SOFT_DIS_JTAG[];
@@ -86,14 +85,9 @@ extern const esp_efuse_desc_t* ESP_EFUSE_FLASH_TPUW[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_DOWNLOAD_MODE[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_LEGACY_SPI_BOOT[];
 extern const esp_efuse_desc_t* ESP_EFUSE_UART_PRINT_CHANNEL[];
-extern const esp_efuse_desc_t* ESP_EFUSE_FLASH_ECC_MODE[];
 extern const esp_efuse_desc_t* ESP_EFUSE_DIS_USB_DOWNLOAD_MODE[];
 extern const esp_efuse_desc_t* ESP_EFUSE_ENABLE_SECURITY_DOWNLOAD[];
 extern const esp_efuse_desc_t* ESP_EFUSE_UART_PRINT_CONTROL[];
-extern const esp_efuse_desc_t* ESP_EFUSE_PIN_POWER_SELECTION[];
-extern const esp_efuse_desc_t* ESP_EFUSE_FLASH_TYPE[];
-extern const esp_efuse_desc_t* ESP_EFUSE_FLASH_PAGE_SIZE[];
-extern const esp_efuse_desc_t* ESP_EFUSE_FLASH_ECC_EN[];
 extern const esp_efuse_desc_t* ESP_EFUSE_FORCE_SEND_RESUME[];
 extern const esp_efuse_desc_t* ESP_EFUSE_SECURE_VERSION[];
 extern const esp_efuse_desc_t* ESP_EFUSE_BOOT_DISABLE_FAST_WAKE[];

components/hal/esp32c3/include/hal/efuse_ll.h

@@ -30,11 +30,6 @@ __attribute__((always_inline)) static inline uint32_t efuse_ll_get_wdt_delay_sel
     return EFUSE.rd_repeat_data1.wdt_delay_sel;
 }
 
-__attribute__((always_inline)) static inline uint32_t efuse_ll_get_flash_type(void)
-{
-    return EFUSE.rd_repeat_data3.flash_type;
-}
-
 __attribute__((always_inline)) static inline uint32_t efuse_ll_get_mac0(void)
 {
     return EFUSE.rd_mac_spi_sys_0;

components/hal/esp32h2/include/hal/efuse_ll.h

@@ -30,11 +30,6 @@ __attribute__((always_inline)) static inline uint32_t efuse_ll_get_wdt_delay_sel
     return EFUSE.rd_repeat_data1.wdt_delay_sel;
 }
 
-__attribute__((always_inline)) static inline uint32_t efuse_ll_get_flash_type(void)
-{
-    return EFUSE.rd_repeat_data3.flash_type;
-}
-
 __attribute__((always_inline)) static inline uint32_t efuse_ll_get_mac0(void)
 {
     return EFUSE.rd_mac_spi_sys_0;

components/soc/esp32c3/include/soc/efuse_reg.h

@@ -274,30 +274,12 @@ extern "C" {
 #define EFUSE_FORCE_SEND_RESUME_M  (BIT(13))
 #define EFUSE_FORCE_SEND_RESUME_V  0x1
 #define EFUSE_FORCE_SEND_RESUME_S  13
-/* EFUSE_FLASH_ECC_EN : R/W ;bitpos:[12] ;default: 1'b0 ; */
-/*description: Set 1 to enable ECC for flash boot.*/
-#define EFUSE_FLASH_ECC_EN  (BIT(12))
-#define EFUSE_FLASH_ECC_EN_M  (BIT(12))
-#define EFUSE_FLASH_ECC_EN_V  0x1
-#define EFUSE_FLASH_ECC_EN_S  12
-/* EFUSE_FLASH_PAGE_SIZE : R/W ;bitpos:[11:10] ;default: 2'h0 ; */
-/*description: Set Flash page size.*/
-#define EFUSE_FLASH_PAGE_SIZE  0x00000003
-#define EFUSE_FLASH_PAGE_SIZE_M  ((EFUSE_FLASH_PAGE_SIZE_V)<<(EFUSE_FLASH_PAGE_SIZE_S))
-#define EFUSE_FLASH_PAGE_SIZE_V  0x3
-#define EFUSE_FLASH_PAGE_SIZE_S  10
-/* EFUSE_FLASH_TYPE : R/W ;bitpos:[9] ;default: 1'b0 ; */
-/*description: Set the maximum lines of SPI flash. 0: four lines. 1: eight lines.*/
-#define EFUSE_FLASH_TYPE  (BIT(9))
-#define EFUSE_FLASH_TYPE_M  (BIT(9))
-#define EFUSE_FLASH_TYPE_V  0x1
-#define EFUSE_FLASH_TYPE_S  9
-/* EFUSE_PIN_POWER_SELECTION : R/W ;bitpos:[8] ;default: 1'b0 ; */
-/*description: GPIO33-GPIO37 power supply selection in ROM code. 0: VDD3P3_CPU. 1: VDD_SPI.*/
-#define EFUSE_PIN_POWER_SELECTION  (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_M  (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_V  0x1
-#define EFUSE_PIN_POWER_SELECTION_S  8
+/* EFUSE_RPT4_RESERVED7 : R/W ;bitpos:[12:8] ;default: 5'h0 ; */
+/*description: Reserved (used for four backups method).*/
+#define EFUSE_RPT4_RESERVED7  0x0000001F
+#define EFUSE_RPT4_RESERVED7_M  ((EFUSE_RPT4_RESERVED7_V)<<(EFUSE_RPT4_RESERVED7_S))
+#define EFUSE_RPT4_RESERVED7_V  0x1F
+#define EFUSE_RPT4_RESERVED7_S  8
 /* EFUSE_UART_PRINT_CONTROL : R/W ;bitpos:[7:6] ;default: 2'h0 ; */
 /*description: Set the default UARTboot message output mode. 00: Enabled. 01:
  Enabled when GPIO8 is low at reset. 10: Enabled when GPIO8 is high at reset. 11:disabled.*/
@@ -317,13 +299,12 @@ extern "C" {
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_M  (BIT(4))
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_V  0x1
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_S  4
-/* EFUSE_FLASH_ECC_MODE : R/W ;bitpos:[3] ;default: 1'b0 ; */
-/*description: Set ECC mode in ROM  0: ROM would Enable Flash ECC 16to18 byte
- mode. 1:ROM would use 16to17 byte mode.*/
-#define EFUSE_FLASH_ECC_MODE  (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_M  (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_V  0x1
-#define EFUSE_FLASH_ECC_MODE_S  3
+/* EFUSE_RPT4_RESERVED8 : R/W ;bitpos:[3] ;default: 1'b0 ; */
+/*description: Reserved (used for four backups method).*/
+#define EFUSE_RPT4_RESERVED8  (BIT(3))
+#define EFUSE_RPT4_RESERVED8_M  (BIT(3))
+#define EFUSE_RPT4_RESERVED8_V  0x1
+#define EFUSE_RPT4_RESERVED8_S  3
 /* EFUSE_UART_PRINT_CHANNEL : R/W ;bitpos:[2] ;default: 1'b0 ; */
 /*description: Selectes the default UART print channel. 0: UART0. 1: UART1.*/
 #define EFUSE_UART_PRINT_CHANNEL  (BIT(2))
@@ -646,30 +627,12 @@ extern "C" {
 #define EFUSE_FORCE_SEND_RESUME_M  (BIT(13))
 #define EFUSE_FORCE_SEND_RESUME_V  0x1
 #define EFUSE_FORCE_SEND_RESUME_S  13
-/* EFUSE_FLASH_ECC_EN : RO ;bitpos:[12] ;default: 1'b0 ; */
-/*description: The value of FLASH_ECC_EN.*/
-#define EFUSE_FLASH_ECC_EN  (BIT(12))
-#define EFUSE_FLASH_ECC_EN_M  (BIT(12))
-#define EFUSE_FLASH_ECC_EN_V  0x1
-#define EFUSE_FLASH_ECC_EN_S  12
-/* EFUSE_FLASH_PAGE_SIZE : RO ;bitpos:[11:10] ;default: 2'h0 ; */
-/*description: The value of FLASH_PAGE_SIZE.*/
-#define EFUSE_FLASH_PAGE_SIZE  0x00000003
-#define EFUSE_FLASH_PAGE_SIZE_M  ((EFUSE_FLASH_PAGE_SIZE_V)<<(EFUSE_FLASH_PAGE_SIZE_S))
-#define EFUSE_FLASH_PAGE_SIZE_V  0x3
-#define EFUSE_FLASH_PAGE_SIZE_S  10
-/* EFUSE_FLASH_TYPE : RO ;bitpos:[9] ;default: 1'b0 ; */
-/*description: The value of FLASH_TYPE.*/
-#define EFUSE_FLASH_TYPE  (BIT(9))
-#define EFUSE_FLASH_TYPE_M  (BIT(9))
-#define EFUSE_FLASH_TYPE_V  0x1
-#define EFUSE_FLASH_TYPE_S  9
-/* EFUSE_PIN_POWER_SELECTION : RO ;bitpos:[8] ;default: 1'b0 ; */
-/*description: The value of PIN_POWER_SELECTION.*/
-#define EFUSE_PIN_POWER_SELECTION  (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_M  (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_V  0x1
-#define EFUSE_PIN_POWER_SELECTION_S  8
+/* EFUSE_RPT4_RESERVED7 : RO ;bitpos:[12:8] ;default: 5'h0 ; */
+/*description: Reserved.*/
+#define EFUSE_RPT4_RESERVED7  0x0000001F
+#define EFUSE_RPT4_RESERVED7_M  ((EFUSE_RPT4_RESERVED7_V)<<(EFUSE_RPT4_RESERVED7_S))
+#define EFUSE_RPT4_RESERVED7_V  0x1F
+#define EFUSE_RPT4_RESERVED7_S  8
 /* EFUSE_UART_PRINT_CONTROL : RO ;bitpos:[7:6] ;default: 2'h0 ; */
 /*description: The value of UART_PRINT_CONTROL.*/
 #define EFUSE_UART_PRINT_CONTROL  0x00000003
@@ -688,12 +651,12 @@ extern "C" {
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_M  (BIT(4))
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_V  0x1
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_S  4
-/* EFUSE_FLASH_ECC_MODE : RO ;bitpos:[3] ;default: 1'b0 ; */
-/*description: The value of FLASH_ECC_MODE.*/
-#define EFUSE_FLASH_ECC_MODE  (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_M  (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_V  0x1
-#define EFUSE_FLASH_ECC_MODE_S  3
+/* EFUSE_RPT4_RESERVED8 : RO ;bitpos:[3] ;default: 1'b0 ; */
+/*description: Reserved.*/
+#define EFUSE_RPT4_RESERVED8  (BIT(3))
+#define EFUSE_RPT4_RESERVED8_M  (BIT(3))
+#define EFUSE_RPT4_RESERVED8_V  0x1
+#define EFUSE_RPT4_RESERVED8_S  3
 /* EFUSE_UART_PRINT_CHANNEL : RO ;bitpos:[2] ;default: 1'b0 ; */
 /*description: The value of UART_PRINT_CHANNEL.*/
 #define EFUSE_UART_PRINT_CHANNEL  (BIT(2))
@@ -1616,30 +1579,12 @@ extern "C" {
 #define EFUSE_FORCE_SEND_RESUME_ERR_M  (BIT(13))
 #define EFUSE_FORCE_SEND_RESUME_ERR_V  0x1
 #define EFUSE_FORCE_SEND_RESUME_ERR_S  13
-/* EFUSE_FLASH_ECC_EN : RO ;bitpos:[12] ;default: 1'b0 ; */
-/*description: If FLASH_ECC_EN_ERR is 1  then it indicates a programming error.*/
-#define EFUSE_FLASH_ECC_EN  (BIT(12))
-#define EFUSE_FLASH_ECC_EN_M  (BIT(12))
-#define EFUSE_FLASH_ECC_EN_V  0x1
-#define EFUSE_FLASH_ECC_EN_S  12
-/* EFUSE_FLASH_PAGE_SIZE : RO ;bitpos:[11:10] ;default: 2'h0 ; */
-/*description: If any bits in FLASH_PAGE_SIZE is 1  then it indicates a programming error.*/
-#define EFUSE_FLASH_PAGE_SIZE  0x00000003
-#define EFUSE_FLASH_PAGE_SIZE_M  ((EFUSE_FLASH_PAGE_SIZE_V)<<(EFUSE_FLASH_PAGE_SIZE_S))
-#define EFUSE_FLASH_PAGE_SIZE_V  0x3
-#define EFUSE_FLASH_PAGE_SIZE_S  10
-/* EFUSE_FLASH_TYPE_ERR : RO ;bitpos:[9] ;default: 1'b0 ; */
-/*description: If FLASH_TYPE is 1  then it indicates a programming error.*/
-#define EFUSE_FLASH_TYPE_ERR  (BIT(9))
-#define EFUSE_FLASH_TYPE_ERR_M  (BIT(9))
-#define EFUSE_FLASH_TYPE_ERR_V  0x1
-#define EFUSE_FLASH_TYPE_ERR_S  9
-/* EFUSE_PIN_POWER_SELECTION_ERR : RO ;bitpos:[8] ;default: 1'b0 ; */
-/*description: If PIN_POWER_SELECTION is 1  then it indicates a programming error.*/
-#define EFUSE_PIN_POWER_SELECTION_ERR  (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_ERR_M  (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_ERR_V  0x1
-#define EFUSE_PIN_POWER_SELECTION_ERR_S  8
+/* EFUSE_RPT4_RESERVED7_ERR : RO ;bitpos:[12:8] ;default: 5'h0 ; */
+/*description: Reserved.*/
+#define EFUSE_RPT4_RESERVED7_ERR  0x0000001F
+#define EFUSE_RPT4_RESERVED7_ERR_M  ((EFUSE_RPT4_RESERVED7_ERR_V)<<(EFUSE_RPT4_RESERVED7_ERR_S))
+#define EFUSE_RPT4_RESERVED7_ERR_V  0x1F
+#define EFUSE_RPT4_RESERVED7_ERR_S  8
 /* EFUSE_UART_PRINT_CONTROL_ERR : RO ;bitpos:[7:6] ;default: 2'h0 ; */
 /*description: If any bit in UART_PRINT_CONTROL is 1  then it indicates a programming error.*/
 #define EFUSE_UART_PRINT_CONTROL_ERR  0x00000003
@@ -1658,12 +1603,12 @@ extern "C" {
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_ERR_M  (BIT(4))
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_ERR_V  0x1
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_ERR_S  4
-/* EFUSE_FLASH_ECC_MODE_ERR : RO ;bitpos:[3] ;default: 1'b0 ; */
-/*description: If FLASH_ECC_MODE is 1  then it indicates a programming error.*/
-#define EFUSE_FLASH_ECC_MODE_ERR  (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_ERR_M  (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_ERR_V  0x1
-#define EFUSE_FLASH_ECC_MODE_ERR_S  3
+/* EFUSE_RPT4_RESERVED8_ERR : RO ;bitpos:[3] ;default: 1'b0 ; */
+/*description: Reserved.*/
+#define EFUSE_RPT4_RESERVED8_ERR  (BIT(3))
+#define EFUSE_RPT4_RESERVED8_ERR_M  (BIT(3))
+#define EFUSE_RPT4_RESERVED8_ERR_V  0x1
+#define EFUSE_RPT4_RESERVED8_ERR_S  3
 /* EFUSE_UART_PRINT_CHANNEL_ERR : RO ;bitpos:[2] ;default: 1'b0 ; */
 /*description: If UART_PRINT_CHANNEL is 1  then it indicates a programming error.*/
 #define EFUSE_UART_PRINT_CHANNEL_ERR  (BIT(2))

components/soc/esp32c3/include/soc/efuse_struct.h

@@ -68,14 +68,11 @@ typedef volatile struct efuse_dev_s {
             uint32_t dis_download_mode:        1;                /*Set this bit to disable download mode (boot_mode[3:0] = 0  1  2  3  6  7).*/
             uint32_t dis_legacy_spi_boot:      1;                /*Set this bit to disable Legacy SPI boot mode (boot_mode[3:0] = 4).*/
             uint32_t uart_print_channel:       1;                /*Selectes the default UART print channel. 0: UART0. 1: UART1.*/
-            uint32_t flash_ecc_mode:           1;                /*Set ECC mode in ROM  0: ROM would Enable Flash ECC 16to18 byte mode. 1:ROM would use 16to17 byte mode.*/
+            uint32_t rpt4_reserved8:           1;                /*Reserved (used for four backups method).*/
             uint32_t dis_usb_download_mode:    1;                /*Set this bit to disable UART download mode through USB.*/
             uint32_t enable_security_download: 1;                /*Set this bit to enable secure UART download mode.*/
             uint32_t uart_print_control:       2;                /*Set the default UARTboot message output mode. 00: Enabled. 01: Enabled when GPIO8 is low at reset. 10: Enabled when GPIO8 is high at reset. 11:disabled.*/
-            uint32_t pin_power_selection:      1;                /*GPIO33-GPIO37 power supply selection in ROM code. 0: VDD3P3_CPU. 1: VDD_SPI.*/
-            uint32_t flash_type:               1;                /*Set the maximum lines of SPI flash. 0: four lines. 1: eight lines.*/
-            uint32_t flash_page_size:          2;                /*Set Flash page size.*/
-            uint32_t flash_ecc_en:             1;                /*Set 1 to enable ECC for flash boot.*/
+            uint32_t rpt4_reserved7:           5;                /*Reserved (used for four backups method).*/
             uint32_t force_send_resume:        1;                /*Set this bit to force ROM code to send a resume command during SPI boot.*/
             uint32_t secure_version:          16;                /*Secure version (used by ESP-IDF anti-rollback feature).*/
             uint32_t rpt4_reserved1:           2;                /*Reserved (used for four backups method).*/
@@ -152,14 +149,11 @@ typedef volatile struct efuse_dev_s {
             uint32_t dis_download_mode:        1;                /*The value of DIS_DOWNLOAD_MODE.*/
             uint32_t dis_legacy_spi_boot:      1;                /*The value of DIS_LEGACY_SPI_BOOT.*/
             uint32_t uart_print_channel:       1;                /*The value of UART_PRINT_CHANNEL.*/
-            uint32_t flash_ecc_mode:           1;                /*The value of FLASH_ECC_MODE.*/
+            uint32_t rpt4_reserved8:           1;                /*Reserved.*/
             uint32_t dis_usb_download_mode:    1;                /*The value of DIS_USB_DOWNLOAD_MODE.*/
             uint32_t enable_security_download: 1;                /*The value of ENABLE_SECURITY_DOWNLOAD.*/
             uint32_t uart_print_control:       2;                /*The value of UART_PRINT_CONTROL.*/
-            uint32_t pin_power_selection:      1;                /*The value of PIN_POWER_SELECTION.*/
-            uint32_t flash_type:               1;                /*The value of FLASH_TYPE.*/
-            uint32_t flash_page_size:          2;                /*The value of FLASH_PAGE_SIZE.*/
-            uint32_t flash_ecc_en:             1;                /*The value of FLASH_ECC_EN.*/
+            uint32_t rpt4_reserved7:           5;                /*Reserved.*/
             uint32_t force_send_resume:        1;                /*The value of FORCE_SEND_RESUME.*/
             uint32_t secure_version:          16;                /*The value of SECURE_VERSION.*/
             uint32_t rpt4_reserved1:           2;                /*Reserved.*/
@@ -322,14 +316,11 @@ typedef volatile struct efuse_dev_s {
             uint32_t dis_download_mode_err:        1;            /*If DIS_DOWNLOAD_MODE is 1  then it indicates a programming error.*/
             uint32_t dis_legacy_spi_boot_err:      1;            /*If DIS_LEGACY_SPI_BOOT is 1  then it indicates a programming error.*/
             uint32_t uart_print_channel_err:       1;            /*If UART_PRINT_CHANNEL is 1  then it indicates a programming error.*/
-            uint32_t flash_ecc_mode_err:           1;            /*If FLASH_ECC_MODE is 1  then it indicates a programming error.*/
+            uint32_t rpt4_reserved8_err:           1;            /*Reserved.*/
             uint32_t dis_usb_download_mode_err:    1;            /*If DIS_USB_DOWNLOAD_MODE is 1  then it indicates a programming error.*/
             uint32_t enable_security_download_err: 1;            /*If ENABLE_SECURITY_DOWNLOAD is 1  then it indicates a programming error.*/
             uint32_t uart_print_control_err:       2;            /*If any bit in UART_PRINT_CONTROL is 1  then it indicates a programming error.*/
-            uint32_t pin_power_selection_err:      1;            /*If PIN_POWER_SELECTION is 1  then it indicates a programming error.*/
-            uint32_t flash_type_err:               1;            /*If FLASH_TYPE is 1  then it indicates a programming error.*/
-            uint32_t flash_page_size:              2;            /*If any bits in FLASH_PAGE_SIZE is 1  then it indicates a programming error.*/
-            uint32_t flash_ecc_en:                 1;            /*If FLASH_ECC_EN_ERR is 1  then it indicates a programming error.*/
+            uint32_t rpt4_reserved7_err:           5;            /*Reserved*/
             uint32_t force_send_resume_err:        1;            /*If FORCE_SEND_RESUME is 1  then it indicates a programming error.*/
             uint32_t secure_version_err:          16;            /*If any bit in SECURE_VERSION is 1  then it indicates a programming error.*/
             uint32_t rpt4_reserved1_err:           2;            /*Reserved.*/

components/soc/esp32h2/include/rev1/soc/efuse_reg.h

@@ -274,30 +274,12 @@ extern "C" {
 #define EFUSE_FORCE_SEND_RESUME_M  (BIT(13))
 #define EFUSE_FORCE_SEND_RESUME_V  0x1
 #define EFUSE_FORCE_SEND_RESUME_S  13
-/* EFUSE_FLASH_ECC_EN : R/W ;bitpos:[12] ;default: 1'b0 ; */
-/*description: Set 1 to enable ECC for flash boot.*/
-#define EFUSE_FLASH_ECC_EN  (BIT(12))
-#define EFUSE_FLASH_ECC_EN_M  (BIT(12))
-#define EFUSE_FLASH_ECC_EN_V  0x1
-#define EFUSE_FLASH_ECC_EN_S  12
-/* EFUSE_FLASH_PAGE_SIZE : R/W ;bitpos:[11:10] ;default: 2'h0 ; */
-/*description: Set Flash page size.*/
-#define EFUSE_FLASH_PAGE_SIZE  0x00000003
-#define EFUSE_FLASH_PAGE_SIZE_M  ((EFUSE_FLASH_PAGE_SIZE_V)<<(EFUSE_FLASH_PAGE_SIZE_S))
-#define EFUSE_FLASH_PAGE_SIZE_V  0x3
-#define EFUSE_FLASH_PAGE_SIZE_S  10
-/* EFUSE_FLASH_TYPE : R/W ;bitpos:[9] ;default: 1'b0 ; */
-/*description: Set the maximum lines of SPI flash. 0: four lines. 1: eight lines.*/
-#define EFUSE_FLASH_TYPE  (BIT(9))
-#define EFUSE_FLASH_TYPE_M  (BIT(9))
-#define EFUSE_FLASH_TYPE_V  0x1
-#define EFUSE_FLASH_TYPE_S  9
-/* EFUSE_PIN_POWER_SELECTION : R/W ;bitpos:[8] ;default: 1'b0 ; */
-/*description: GPIO33-GPIO37 power supply selection in ROM code. 0: VDD3P3_CPU. 1: VDD_SPI.*/
-#define EFUSE_PIN_POWER_SELECTION  (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_M  (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_V  0x1
-#define EFUSE_PIN_POWER_SELECTION_S  8
+/* EFUSE_RPT4_RESERVED7 : R/W ;bitpos:[12:8] ;default: 5'h0 ; */
+/*description: Reserved (used for four backups method).*/
+#define EFUSE_RPT4_RESERVED7  0x0000001F
+#define EFUSE_RPT4_RESERVED7_M  ((EFUSE_RPT4_RESERVED7_V)<<(EFUSE_RPT4_RESERVED7_S))
+#define EFUSE_RPT4_RESERVED7_V  0x1F
+#define EFUSE_RPT4_RESERVED7_S  8
 /* EFUSE_UART_PRINT_CONTROL : R/W ;bitpos:[7:6] ;default: 2'h0 ; */
 /*description: Set the default UARTboot message output mode. 00: Enabled. 01:
  Enabled when GPIO8 is low at reset. 10: Enabled when GPIO8 is high at reset. 11:disabled.*/
@@ -317,13 +299,12 @@ extern "C" {
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_M  (BIT(4))
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_V  0x1
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_S  4
-/* EFUSE_FLASH_ECC_MODE : R/W ;bitpos:[3] ;default: 1'b0 ; */
-/*description: Set ECC mode in ROM  0: ROM would Enable Flash ECC 16to18 byte
- mode. 1:ROM would use 16to17 byte mode.*/
-#define EFUSE_FLASH_ECC_MODE  (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_M  (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_V  0x1
-#define EFUSE_FLASH_ECC_MODE_S  3
+/* EFUSE_RPT4_RESERVED8 : R/W ;bitpos:[3] ;default: 1'b0 ; */
+/*description: Reserved (used for four backups method).*/
+#define EFUSE_RPT4_RESERVED8  (BIT(3))
+#define EFUSE_RPT4_RESERVED8_M  (BIT(3))
+#define EFUSE_RPT4_RESERVED8_V  0x1
+#define EFUSE_RPT4_RESERVED8_S  3
 /* EFUSE_UART_PRINT_CHANNEL : R/W ;bitpos:[2] ;default: 1'b0 ; */
 /*description: Selectes the default UART print channel. 0: UART0. 1: UART1.*/
 #define EFUSE_UART_PRINT_CHANNEL  (BIT(2))
@@ -646,30 +627,12 @@ extern "C" {
 #define EFUSE_FORCE_SEND_RESUME_M  (BIT(13))
 #define EFUSE_FORCE_SEND_RESUME_V  0x1
 #define EFUSE_FORCE_SEND_RESUME_S  13
-/* EFUSE_FLASH_ECC_EN : RO ;bitpos:[12] ;default: 1'b0 ; */
-/*description: The value of FLASH_ECC_EN.*/
-#define EFUSE_FLASH_ECC_EN  (BIT(12))
-#define EFUSE_FLASH_ECC_EN_M  (BIT(12))
-#define EFUSE_FLASH_ECC_EN_V  0x1
-#define EFUSE_FLASH_ECC_EN_S  12
-/* EFUSE_FLASH_PAGE_SIZE : RO ;bitpos:[11:10] ;default: 2'h0 ; */
-/*description: The value of FLASH_PAGE_SIZE.*/
-#define EFUSE_FLASH_PAGE_SIZE  0x00000003
-#define EFUSE_FLASH_PAGE_SIZE_M  ((EFUSE_FLASH_PAGE_SIZE_V)<<(EFUSE_FLASH_PAGE_SIZE_S))
-#define EFUSE_FLASH_PAGE_SIZE_V  0x3
-#define EFUSE_FLASH_PAGE_SIZE_S  10
-/* EFUSE_FLASH_TYPE : RO ;bitpos:[9] ;default: 1'b0 ; */
-/*description: The value of FLASH_TYPE.*/
-#define EFUSE_FLASH_TYPE  (BIT(9))
-#define EFUSE_FLASH_TYPE_M  (BIT(9))
-#define EFUSE_FLASH_TYPE_V  0x1
-#define EFUSE_FLASH_TYPE_S  9
-/* EFUSE_PIN_POWER_SELECTION : RO ;bitpos:[8] ;default: 1'b0 ; */
-/*description: The value of PIN_POWER_SELECTION.*/
-#define EFUSE_PIN_POWER_SELECTION  (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_M  (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_V  0x1
-#define EFUSE_PIN_POWER_SELECTION_S  8
+/* EFUSE_RPT4_RESERVED7 : RO ;bitpos:[12:8] ;default: 5'h0 ; */
+/*description: Reserved.*/
+#define EFUSE_RPT4_RESERVED7  0x0000001F
+#define EFUSE_RPT4_RESERVED7_M  ((EFUSE_RPT4_RESERVED7_V)<<(EFUSE_RPT4_RESERVED7_S))
+#define EFUSE_RPT4_RESERVED7_V  0x1F
+#define EFUSE_RPT4_RESERVED7_S  8
 /* EFUSE_UART_PRINT_CONTROL : RO ;bitpos:[7:6] ;default: 2'h0 ; */
 /*description: The value of UART_PRINT_CONTROL.*/
 #define EFUSE_UART_PRINT_CONTROL  0x00000003
@@ -688,12 +651,12 @@ extern "C" {
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_M  (BIT(4))
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_V  0x1
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_S  4
-/* EFUSE_FLASH_ECC_MODE : RO ;bitpos:[3] ;default: 1'b0 ; */
-/*description: The value of FLASH_ECC_MODE.*/
-#define EFUSE_FLASH_ECC_MODE  (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_M  (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_V  0x1
-#define EFUSE_FLASH_ECC_MODE_S  3
+/* EFUSE_RPT4_RESERVED8 : RO ;bitpos:[3] ;default: 1'b0 ; */
+/*description: Reserved.*/
+#define EFUSE_RPT4_RESERVED8  (BIT(3))
+#define EFUSE_RPT4_RESERVED8_M  (BIT(3))
+#define EFUSE_RPT4_RESERVED8_V  0x1
+#define EFUSE_RPT4_RESERVED8_S  3
 /* EFUSE_UART_PRINT_CHANNEL : RO ;bitpos:[2] ;default: 1'b0 ; */
 /*description: The value of UART_PRINT_CHANNEL.*/
 #define EFUSE_UART_PRINT_CHANNEL  (BIT(2))
@@ -1616,30 +1579,12 @@ extern "C" {
 #define EFUSE_FORCE_SEND_RESUME_ERR_M  (BIT(13))
 #define EFUSE_FORCE_SEND_RESUME_ERR_V  0x1
 #define EFUSE_FORCE_SEND_RESUME_ERR_S  13
-/* EFUSE_FLASH_ECC_EN : RO ;bitpos:[12] ;default: 1'b0 ; */
-/*description: If FLASH_ECC_EN_ERR is 1  then it indicates a programming error.*/
-#define EFUSE_FLASH_ECC_EN  (BIT(12))
-#define EFUSE_FLASH_ECC_EN_M  (BIT(12))
-#define EFUSE_FLASH_ECC_EN_V  0x1
-#define EFUSE_FLASH_ECC_EN_S  12
-/* EFUSE_FLASH_PAGE_SIZE : RO ;bitpos:[11:10] ;default: 2'h0 ; */
-/*description: If any bits in FLASH_PAGE_SIZE is 1  then it indicates a programming error.*/
-#define EFUSE_FLASH_PAGE_SIZE  0x00000003
-#define EFUSE_FLASH_PAGE_SIZE_M  ((EFUSE_FLASH_PAGE_SIZE_V)<<(EFUSE_FLASH_PAGE_SIZE_S))
-#define EFUSE_FLASH_PAGE_SIZE_V  0x3
-#define EFUSE_FLASH_PAGE_SIZE_S  10
-/* EFUSE_FLASH_TYPE_ERR : RO ;bitpos:[9] ;default: 1'b0 ; */
-/*description: If FLASH_TYPE is 1  then it indicates a programming error.*/
-#define EFUSE_FLASH_TYPE_ERR  (BIT(9))
-#define EFUSE_FLASH_TYPE_ERR_M  (BIT(9))
-#define EFUSE_FLASH_TYPE_ERR_V  0x1
-#define EFUSE_FLASH_TYPE_ERR_S  9
-/* EFUSE_PIN_POWER_SELECTION_ERR : RO ;bitpos:[8] ;default: 1'b0 ; */
-/*description: If PIN_POWER_SELECTION is 1  then it indicates a programming error.*/
-#define EFUSE_PIN_POWER_SELECTION_ERR  (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_ERR_M  (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_ERR_V  0x1
-#define EFUSE_PIN_POWER_SELECTION_ERR_S  8
+/* EFUSE_RPT4_RESERVED7_ERR : RO ;bitpos:[12:8] ;default: 5'h0 ; */
+/*description: Reserved.*/
+#define EFUSE_RPT4_RESERVED7_ERR  0x0000001F
+#define EFUSE_RPT4_RESERVED7_ERR_M  ((EFUSE_RPT4_RESERVED7_ERR_V)<<(EFUSE_RPT4_RESERVED7_ERR_S))
+#define EFUSE_RPT4_RESERVED7_ERR_V  0x1F
+#define EFUSE_RPT4_RESERVED7_ERR_S  8
 /* EFUSE_UART_PRINT_CONTROL_ERR : RO ;bitpos:[7:6] ;default: 2'h0 ; */
 /*description: If any bit in UART_PRINT_CONTROL is 1  then it indicates a programming error.*/
 #define EFUSE_UART_PRINT_CONTROL_ERR  0x00000003
@@ -1658,12 +1603,12 @@ extern "C" {
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_ERR_M  (BIT(4))
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_ERR_V  0x1
 #define EFUSE_DIS_USB_DOWNLOAD_MODE_ERR_S  4
-/* EFUSE_FLASH_ECC_MODE_ERR : RO ;bitpos:[3] ;default: 1'b0 ; */
-/*description: If FLASH_ECC_MODE is 1  then it indicates a programming error.*/
-#define EFUSE_FLASH_ECC_MODE_ERR  (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_ERR_M  (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_ERR_V  0x1
-#define EFUSE_FLASH_ECC_MODE_ERR_S  3
+/* EFUSE_RPT4_RESERVED8_ERR : RO ;bitpos:[3] ;default: 1'b0 ; */
+/*description: Reserved.*/
+#define EFUSE_RPT4_RESERVED8_ERR  (BIT(3))
+#define EFUSE_RPT4_RESERVED8_ERR_M  (BIT(3))
+#define EFUSE_RPT4_RESERVED8_ERR_V  0x1
+#define EFUSE_RPT4_RESERVED8_ERR_S  3
 /* EFUSE_UART_PRINT_CHANNEL_ERR : RO ;bitpos:[2] ;default: 1'b0 ; */
 /*description: If UART_PRINT_CHANNEL is 1  then it indicates a programming error.*/
 #define EFUSE_UART_PRINT_CHANNEL_ERR  (BIT(2))

components/soc/esp32h2/include/rev1/soc/efuse_struct.h

@@ -68,14 +68,11 @@ typedef volatile struct efuse_dev_s {
             uint32_t dis_download_mode:        1;                /*Set this bit to disable download mode (boot_mode[3:0] = 0  1  2  3  6  7).*/
             uint32_t dis_legacy_spi_boot:      1;                /*Set this bit to disable Legacy SPI boot mode (boot_mode[3:0] = 4).*/
             uint32_t uart_print_channel:       1;                /*Selectes the default UART print channel. 0: UART0. 1: UART1.*/
-            uint32_t flash_ecc_mode:           1;                /*Set ECC mode in ROM  0: ROM would Enable Flash ECC 16to18 byte mode. 1:ROM would use 16to17 byte mode.*/
+            uint32_t rpt4_reserved8:           1;                /*Reserved (used for four backups method).*/
             uint32_t dis_usb_download_mode:    1;                /*Set this bit to disable UART download mode through USB.*/
             uint32_t enable_security_download: 1;                /*Set this bit to enable secure UART download mode.*/
             uint32_t uart_print_control:       2;                /*Set the default UARTboot message output mode. 00: Enabled. 01: Enabled when GPIO8 is low at reset. 10: Enabled when GPIO8 is high at reset. 11:disabled.*/
-            uint32_t pin_power_selection:      1;                /*GPIO33-GPIO37 power supply selection in ROM code. 0: VDD3P3_CPU. 1: VDD_SPI.*/
-            uint32_t flash_type:               1;                /*Set the maximum lines of SPI flash. 0: four lines. 1: eight lines.*/
-            uint32_t flash_page_size:          2;                /*Set Flash page size.*/
-            uint32_t flash_ecc_en:             1;                /*Set 1 to enable ECC for flash boot.*/
+            uint32_t rpt4_reserved7:           5;                /*Reserved (used for four backups method).*/
             uint32_t force_send_resume:        1;                /*Set this bit to force ROM code to send a resume command during SPI boot.*/
             uint32_t secure_version:          16;                /*Secure version (used by ESP-IDF anti-rollback feature).*/
             uint32_t rpt4_reserved1:           2;                /*Reserved (used for four backups method).*/
@@ -152,14 +149,11 @@ typedef volatile struct efuse_dev_s {
             uint32_t dis_download_mode:        1;                /*The value of DIS_DOWNLOAD_MODE.*/
             uint32_t dis_legacy_spi_boot:      1;                /*The value of DIS_LEGACY_SPI_BOOT.*/
             uint32_t uart_print_channel:       1;                /*The value of UART_PRINT_CHANNEL.*/
-            uint32_t flash_ecc_mode:           1;                /*The value of FLASH_ECC_MODE.*/
+            uint32_t rpt4_reserved8:           1;                /*Reserved.*/
             uint32_t dis_usb_download_mode:    1;                /*The value of DIS_USB_DOWNLOAD_MODE.*/
             uint32_t enable_security_download: 1;                /*The value of ENABLE_SECURITY_DOWNLOAD.*/
             uint32_t uart_print_control:       2;                /*The value of UART_PRINT_CONTROL.*/
-            uint32_t pin_power_selection:      1;                /*The value of PIN_POWER_SELECTION.*/
-            uint32_t flash_type:               1;                /*The value of FLASH_TYPE.*/
-            uint32_t flash_page_size:          2;                /*The value of FLASH_PAGE_SIZE.*/
-            uint32_t flash_ecc_en:             1;                /*The value of FLASH_ECC_EN.*/
+            uint32_t rpt4_reserved7:           5;                /*Reserved.*/
             uint32_t force_send_resume:        1;                /*The value of FORCE_SEND_RESUME.*/
             uint32_t secure_version:          16;                /*The value of SECURE_VERSION.*/
             uint32_t rpt4_reserved1:           2;                /*Reserved.*/
@@ -322,14 +316,11 @@ typedef volatile struct efuse_dev_s {
             uint32_t dis_download_mode_err:        1;            /*If DIS_DOWNLOAD_MODE is 1  then it indicates a programming error.*/
             uint32_t dis_legacy_spi_boot_err:      1;            /*If DIS_LEGACY_SPI_BOOT is 1  then it indicates a programming error.*/
             uint32_t uart_print_channel_err:       1;            /*If UART_PRINT_CHANNEL is 1  then it indicates a programming error.*/
-            uint32_t flash_ecc_mode_err:           1;            /*If FLASH_ECC_MODE is 1  then it indicates a programming error.*/
+            uint32_t rpt4_reserved8_err:           1;            /*Reserved.*/
             uint32_t dis_usb_download_mode_err:    1;            /*If DIS_USB_DOWNLOAD_MODE is 1  then it indicates a programming error.*/
             uint32_t enable_security_download_err: 1;            /*If ENABLE_SECURITY_DOWNLOAD is 1  then it indicates a programming error.*/
             uint32_t uart_print_control_err:       2;            /*If any bit in UART_PRINT_CONTROL is 1  then it indicates a programming error.*/
-            uint32_t pin_power_selection_err:      1;            /*If PIN_POWER_SELECTION is 1  then it indicates a programming error.*/
-            uint32_t flash_type_err:               1;            /*If FLASH_TYPE is 1  then it indicates a programming error.*/
-            uint32_t flash_page_size:              2;            /*If any bits in FLASH_PAGE_SIZE is 1  then it indicates a programming error.*/
-            uint32_t flash_ecc_en:                 1;            /*If FLASH_ECC_EN_ERR is 1  then it indicates a programming error.*/
+            uint32_t rpt4_reserved7_err:           5;            /*Reserved*/
             uint32_t force_send_resume_err:        1;            /*If FORCE_SEND_RESUME is 1  then it indicates a programming error.*/
             uint32_t secure_version_err:          16;            /*If any bit in SECURE_VERSION is 1  then it indicates a programming error.*/
             uint32_t rpt4_reserved1_err:           2;            /*Reserved.*/

components/soc/esp32h2/include/rev2/soc/efuse_reg.h

@@ -166,13 +166,13 @@ extern "C" {
 #define EFUSE_RD_DIS_M  (EFUSE_RD_DIS_V << EFUSE_RD_DIS_S)
 #define EFUSE_RD_DIS_V  0x0000007FU
 #define EFUSE_RD_DIS_S  0
-/** EFUSE_DIS_RTC_RAM_BOOT : RO; bitpos: [7]; default: 0;
- *  The value of DIS_RTC_RAM_BOOT.
+/** EFUSE_RPT4_RESERVED5 : R/W ;bitpos:[7] ;default: 1'b0 ;
+ *  Reserved.
  */
-#define EFUSE_DIS_RTC_RAM_BOOT    (BIT(7))
-#define EFUSE_DIS_RTC_RAM_BOOT_M  (EFUSE_DIS_RTC_RAM_BOOT_V << EFUSE_DIS_RTC_RAM_BOOT_S)
-#define EFUSE_DIS_RTC_RAM_BOOT_V  0x00000001U
-#define EFUSE_DIS_RTC_RAM_BOOT_S  7
+#define EFUSE_RPT4_RESERVED5  (BIT(7))
+#define EFUSE_RPT4_RESERVED5_M  (BIT(7))
+#define EFUSE_RPT4_RESERVED5_V  0x1
+#define EFUSE_RPT4_RESERVED5_S  7
 /** EFUSE_DIS_ICACHE : RO; bitpos: [8]; default: 0;
  *  The value of DIS_ICACHE.
  */
@@ -208,13 +208,13 @@ extern "C" {
 #define EFUSE_DIS_FORCE_DOWNLOAD_M  (EFUSE_DIS_FORCE_DOWNLOAD_V << EFUSE_DIS_FORCE_DOWNLOAD_S)
 #define EFUSE_DIS_FORCE_DOWNLOAD_V  0x00000001U
 #define EFUSE_DIS_FORCE_DOWNLOAD_S  12
-/** EFUSE_DIS_USB : RO; bitpos: [13]; default: 0;
- *  The value of DIS_USB.
+/** EFUSE_RPT4_RESERVED6 : RO ;bitpos:[13] ;default: 1'b0 ;
+ * Reserved.
  */
-#define EFUSE_DIS_USB    (BIT(13))
-#define EFUSE_DIS_USB_M  (EFUSE_DIS_USB_V << EFUSE_DIS_USB_S)
-#define EFUSE_DIS_USB_V  0x00000001U
-#define EFUSE_DIS_USB_S  13
+#define EFUSE_RPT4_RESERVED6    (BIT(13))
+#define EFUSE_RPT4_RESERVED6_M  (BIT(13))
+#define EFUSE_RPT4_RESERVED6_V  0x1
+#define EFUSE_RPT4_RESERVED6_S  13
 /** EFUSE_DIS_TWAI : RO; bitpos: [14]; default: 0;
  *  The value of DIS_TWAI.
  */
@@ -454,13 +454,13 @@ extern "C" {
 #define EFUSE_UART_PRINT_CHANNEL_M  (EFUSE_UART_PRINT_CHANNEL_V << EFUSE_UART_PRINT_CHANNEL_S)
 #define EFUSE_UART_PRINT_CHANNEL_V  0x00000001U
 #define EFUSE_UART_PRINT_CHANNEL_S  2
-/** EFUSE_FLASH_ECC_MODE : RO; bitpos: [3]; default: 0;
- *  The value of FLASH_ECC_MODE.
+/** EFUSE_RPT4_RESERVED8 : RO; bitpos: [3]; default: 0;
+ *  Reserved.
  */
-#define EFUSE_FLASH_ECC_MODE    (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_M  (EFUSE_FLASH_ECC_MODE_V << EFUSE_FLASH_ECC_MODE_S)
-#define EFUSE_FLASH_ECC_MODE_V  0x00000001U
-#define EFUSE_FLASH_ECC_MODE_S  3
+#define EFUSE_RPT4_RESERVED8    (BIT(3))
+#define EFUSE_RPT4_RESERVED8_M  (EFUSE_RPT4_RESERVED8_V << EFUSE_RPT4_RESERVED8_S)
+#define EFUSE_RPT4_RESERVED8_V  0x00000001U
+#define EFUSE_RPT4_RESERVED8_S  3
 /** EFUSE_DIS_USB_DOWNLOAD_MODE : RO; bitpos: [4]; default: 0;
  *  The value of DIS_USB_DOWNLOAD_MODE.
  */
@@ -482,34 +482,13 @@ extern "C" {
 #define EFUSE_UART_PRINT_CONTROL_M  (EFUSE_UART_PRINT_CONTROL_V << EFUSE_UART_PRINT_CONTROL_S)
 #define EFUSE_UART_PRINT_CONTROL_V  0x00000003U
 #define EFUSE_UART_PRINT_CONTROL_S  6
-/** EFUSE_PIN_POWER_SELECTION : RO; bitpos: [8]; default: 0;
- *  The value of PIN_POWER_SELECTION.
- */
-#define EFUSE_PIN_POWER_SELECTION    (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_M  (EFUSE_PIN_POWER_SELECTION_V << EFUSE_PIN_POWER_SELECTION_S)
-#define EFUSE_PIN_POWER_SELECTION_V  0x00000001U
-#define EFUSE_PIN_POWER_SELECTION_S  8
-/** EFUSE_FLASH_TYPE : RO; bitpos: [9]; default: 0;
- *  The value of FLASH_TYPE.
- */
-#define EFUSE_FLASH_TYPE    (BIT(9))
-#define EFUSE_FLASH_TYPE_M  (EFUSE_FLASH_TYPE_V << EFUSE_FLASH_TYPE_S)
-#define EFUSE_FLASH_TYPE_V  0x00000001U
-#define EFUSE_FLASH_TYPE_S  9
-/** EFUSE_FLASH_PAGE_SIZE : RO; bitpos: [11:10]; default: 0;
- *  The value of FLASH_PAGE_SIZE.
- */
-#define EFUSE_FLASH_PAGE_SIZE    0x00000003U
-#define EFUSE_FLASH_PAGE_SIZE_M  (EFUSE_FLASH_PAGE_SIZE_V << EFUSE_FLASH_PAGE_SIZE_S)
-#define EFUSE_FLASH_PAGE_SIZE_V  0x00000003U
-#define EFUSE_FLASH_PAGE_SIZE_S  10
-/** EFUSE_FLASH_ECC_EN : RO; bitpos: [12]; default: 0;
- *  The value of FLASH_ECC_EN.
- */
-#define EFUSE_FLASH_ECC_EN    (BIT(12))
-#define EFUSE_FLASH_ECC_EN_M  (EFUSE_FLASH_ECC_EN_V << EFUSE_FLASH_ECC_EN_S)
-#define EFUSE_FLASH_ECC_EN_V  0x00000001U
-#define EFUSE_FLASH_ECC_EN_S  12
+/** EFUSE_RPT4_RESERVED7 : RO; bitpos: [12:8]; default: 0;
+ *  Reserved.
+ */
+#define EFUSE_RPT4_RESERVED7    0x0000001FU
+#define EFUSE_RPT4_RESERVED7_M  (EFUSE_RPT4_RESERVED7_V << EFUSE_RPT4_RESERVED7_S)
+#define EFUSE_RPT4_RESERVED7_V  0x0000001FU
+#define EFUSE_RPT4_RESERVED7_S  8
 /** EFUSE_FORCE_SEND_RESUME : RO; bitpos: [13]; default: 0;
  *  The value of FORCE_SEND_RESUME.
  */
@@ -1515,13 +1494,13 @@ extern "C" {
 #define EFUSE_RD_DIS_ERR_M  (EFUSE_RD_DIS_ERR_V << EFUSE_RD_DIS_ERR_S)
 #define EFUSE_RD_DIS_ERR_V  0x0000007FU
 #define EFUSE_RD_DIS_ERR_S  0
-/** EFUSE_DIS_RTC_RAM_BOOT_ERR : RO; bitpos: [7]; default: 0;
- *  If DIS_RTC_RAM_BOOT is 1, then it indicates a programming error.
+/** EFUSE_RPT4_RESERVED5_ERR : RO; bitpos: [7]; default: 0;
+ *  Reserved.
  */
-#define EFUSE_DIS_RTC_RAM_BOOT_ERR    (BIT(7))
-#define EFUSE_DIS_RTC_RAM_BOOT_ERR_M  (EFUSE_DIS_RTC_RAM_BOOT_ERR_V << EFUSE_DIS_RTC_RAM_BOOT_ERR_S)
-#define EFUSE_DIS_RTC_RAM_BOOT_ERR_V  0x00000001U
-#define EFUSE_DIS_RTC_RAM_BOOT_ERR_S  7
+#define EFUSE_RPT4_RESERVED5_ERR    (BIT(7))
+#define EFUSE_RPT4_RESERVED5_ERR_M  (EFUSE_RPT4_RESERVED5_ERR_V << EFUSE_RPT4_RESERVED5_ERR_S)
+#define EFUSE_RPT4_RESERVED5_ERR_V  0x00000001U
+#define EFUSE_RPT4_RESERVED5_ERR_S  7
 /** EFUSE_DIS_ICACHE_ERR : RO; bitpos: [8]; default: 0;
  *  If DIS_ICACHE is 1, then it indicates a programming error.
  */
@@ -1557,13 +1536,13 @@ extern "C" {
 #define EFUSE_DIS_FORCE_DOWNLOAD_ERR_M  (EFUSE_DIS_FORCE_DOWNLOAD_ERR_V << EFUSE_DIS_FORCE_DOWNLOAD_ERR_S)
 #define EFUSE_DIS_FORCE_DOWNLOAD_ERR_V  0x00000001U
 #define EFUSE_DIS_FORCE_DOWNLOAD_ERR_S  12
-/** EFUSE_DIS_USB_ERR : RO; bitpos: [13]; default: 0;
- *  If DIS_USB is 1, then it indicates a programming error.
+/** EFUSE_RPT4_RESERVED6_ERR : RO; bitpos: [13]; default: 0;
+ *  Reserved.
  */
-#define EFUSE_DIS_USB_ERR    (BIT(13))
-#define EFUSE_DIS_USB_ERR_M  (EFUSE_DIS_USB_ERR_V << EFUSE_DIS_USB_ERR_S)
-#define EFUSE_DIS_USB_ERR_V  0x00000001U
-#define EFUSE_DIS_USB_ERR_S  13
+#define EFUSE_RPT4_RESERVED6_ERR    (BIT(13))
+#define EFUSE_RPT4_RESERVED6_ERR_M  (EFUSE_RPT4_RESERVED6_ERR_V << EFUSE_RPT4_RESERVED6_ERR_S)
+#define EFUSE_RPT4_RESERVED6_ERR_V  0x00000001U
+#define EFUSE_RPT4_RESERVED6_ERR_S  13
 /** EFUSE_DIS_TWAI_ERR : RO; bitpos: [14]; default: 0;
  *  If DIS_TWAI is 1, then it indicates a programming error.
  */
@@ -1803,13 +1782,13 @@ extern "C" {
 #define EFUSE_UART_PRINT_CHANNEL_ERR_M  (EFUSE_UART_PRINT_CHANNEL_ERR_V << EFUSE_UART_PRINT_CHANNEL_ERR_S)
 #define EFUSE_UART_PRINT_CHANNEL_ERR_V  0x00000001U
 #define EFUSE_UART_PRINT_CHANNEL_ERR_S  2
-/** EFUSE_FLASH_ECC_MODE_ERR : RO; bitpos: [3]; default: 0;
- *  If FLASH_ECC_MODE is 1, then it indicates a programming error.
+/** EFUSE_RPT4_RESERVED8_ERR : RO; bitpos: [3]; default: 0;
+ *  Reserved.
  */
-#define EFUSE_FLASH_ECC_MODE_ERR    (BIT(3))
-#define EFUSE_FLASH_ECC_MODE_ERR_M  (EFUSE_FLASH_ECC_MODE_ERR_V << EFUSE_FLASH_ECC_MODE_ERR_S)
-#define EFUSE_FLASH_ECC_MODE_ERR_V  0x00000001U
-#define EFUSE_FLASH_ECC_MODE_ERR_S  3
+#define EFUSE_RPT4_RESERVED8_ERR    (BIT(3))
+#define EFUSE_RPT4_RESERVED8_ERR_M  (EFUSE_RPT4_RESERVED8_ERR_V << EFUSE_RPT4_RESERVED8_ERR_S)
+#define EFUSE_RPT4_RESERVED8_ERR_V  0x00000001U
+#define EFUSE_RPT4_RESERVED8_ERR_S  3
 /** EFUSE_DIS_USB_DOWNLOAD_MODE_ERR : RO; bitpos: [4]; default: 0;
  *  If DIS_USB_DOWNLOAD_MODE is 1, then it indicates a programming error.
  */
@@ -1831,34 +1810,13 @@ extern "C" {
 #define EFUSE_UART_PRINT_CONTROL_ERR_M  (EFUSE_UART_PRINT_CONTROL_ERR_V << EFUSE_UART_PRINT_CONTROL_ERR_S)
 #define EFUSE_UART_PRINT_CONTROL_ERR_V  0x00000003U
 #define EFUSE_UART_PRINT_CONTROL_ERR_S  6
-/** EFUSE_PIN_POWER_SELECTION_ERR : RO; bitpos: [8]; default: 0;
- *  If PIN_POWER_SELECTION is 1, then it indicates a programming error.
- */
-#define EFUSE_PIN_POWER_SELECTION_ERR    (BIT(8))
-#define EFUSE_PIN_POWER_SELECTION_ERR_M  (EFUSE_PIN_POWER_SELECTION_ERR_V << EFUSE_PIN_POWER_SELECTION_ERR_S)
-#define EFUSE_PIN_POWER_SELECTION_ERR_V  0x00000001U
-#define EFUSE_PIN_POWER_SELECTION_ERR_S  8
-/** EFUSE_FLASH_TYPE_ERR : RO; bitpos: [9]; default: 0;
- *  If FLASH_TYPE is 1, then it indicates a programming error.
- */
-#define EFUSE_FLASH_TYPE_ERR    (BIT(9))
-#define EFUSE_FLASH_TYPE_ERR_M  (EFUSE_FLASH_TYPE_ERR_V << EFUSE_FLASH_TYPE_ERR_S)
-#define EFUSE_FLASH_TYPE_ERR_V  0x00000001U
-#define EFUSE_FLASH_TYPE_ERR_S  9
-/** EFUSE_FLASH_PAGE_SIZE_ERR : RO; bitpos: [11:10]; default: 0;
- *  If any bits in FLASH_PAGE_SIZE is 1, then it indicates a programming error.
- */
-#define EFUSE_FLASH_PAGE_SIZE_ERR    0x00000003U
-#define EFUSE_FLASH_PAGE_SIZE_ERR_M  (EFUSE_FLASH_PAGE_SIZE_ERR_V << EFUSE_FLASH_PAGE_SIZE_ERR_S)
-#define EFUSE_FLASH_PAGE_SIZE_ERR_V  0x00000003U
-#define EFUSE_FLASH_PAGE_SIZE_ERR_S  10
-/** EFUSE_FLASH_ECC_EN_ERR : RO; bitpos: [12]; default: 0;
- *  If FLASH_ECC_EN_ERR is 1, then it indicates a programming error.
- */
-#define EFUSE_FLASH_ECC_EN_ERR    (BIT(12))
-#define EFUSE_FLASH_ECC_EN_ERR_M  (EFUSE_FLASH_ECC_EN_ERR_V << EFUSE_FLASH_ECC_EN_ERR_S)
-#define EFUSE_FLASH_ECC_EN_ERR_V  0x00000001U
-#define EFUSE_FLASH_ECC_EN_ERR_S  12
+/** EFUSE_RPT4_RESERVED7_ERR : RO; bitpos: [12:8]; default: 0;
+ *  Reserved.
+ */
+#define EFUSE_RPT4_RESERVED7_ERR    0x0000001FU
+#define EFUSE_RPT4_RESERVED7_ERR_M  (EFUSE_RPT4_RESERVED7_ERR_V << EFUSE_RPT4_RESERVED7_ERR_S)
+#define EFUSE_RPT4_RESERVED7_ERR_V  0x0000001FU
+#define EFUSE_RPT4_RESERVED7_ERR_S  8
 /** EFUSE_FORCE_SEND_RESUME_ERR : RO; bitpos: [13]; default: 0;
  *  If FORCE_SEND_RESUME is 1, then it indicates a programming error.
  */

components/soc/esp32h2/include/rev2/soc/efuse_struct.h

@@ -178,10 +178,10 @@ typedef union {
          *  The value of RD_DIS.
          */
         uint32_t rd_dis:7;
-        /** dis_rtc_ram_boot : RO; bitpos: [7]; default: 0;
-         *  The value of DIS_RTC_RAM_BOOT.
+        /** rpt4_reserved5 : RO; bitpos: [7]; default: 0;
+         *  Reserved.
          */
-        uint32_t dis_rtc_ram_boot:1;
+        uint32_t rpt4_reserved5:1;
         /** dis_icache : RO; bitpos: [8]; default: 0;
          *  The value of DIS_ICACHE.
          */
@@ -202,10 +202,10 @@ typedef union {
          *  The value of DIS_FORCE_DOWNLOAD.
          */
         uint32_t dis_force_download:1;
-        /** dis_usb : RO; bitpos: [13]; default: 0;
-         *  The value of DIS_USB.
+        /** rpt4_reserved6 : RO; bitpos: [13]; default: 0;
+         *  Reserved.
          */
-        uint32_t dis_usb:1;
+        uint32_t rpt4_reserved6:1;
         /** dis_twai : RO; bitpos: [14]; default: 0;
          *  The value of DIS_TWAI.
          */
@@ -361,10 +361,10 @@ typedef union {
          *  The value of UART_PRINT_CHANNEL.
          */
         uint32_t uart_print_channel:1;
-        /** flash_ecc_mode : RO; bitpos: [3]; default: 0;
-         *  The value of FLASH_ECC_MODE.
+        /** rpt4_reserved8 : RO; bitpos: [3]; default: 0;
+         *  Reserved.
          */
-        uint32_t flash_ecc_mode:1;
+        uint32_t rpt4_reserved8:1;
         /** dis_usb_download_mode : RO; bitpos: [4]; default: 0;
          *  The value of DIS_USB_DOWNLOAD_MODE.
          */
@@ -377,22 +377,10 @@ typedef union {
          *  The value of UART_PRINT_CONTROL.
          */
         uint32_t uart_print_control:2;
-        /** pin_power_selection : RO; bitpos: [8]; default: 0;
-         *  The value of PIN_POWER_SELECTION.
-         */
-        uint32_t pin_power_selection:1;
-        /** flash_type : RO; bitpos: [9]; default: 0;
-         *  The value of FLASH_TYPE.
-         */
-        uint32_t flash_type:1;
-        /** flash_page_size : RO; bitpos: [11:10]; default: 0;
-         *  The value of FLASH_PAGE_SIZE.
-         */
-        uint32_t flash_page_size:2;
-        /** flash_ecc_en : RO; bitpos: [12]; default: 0;
-         *  The value of FLASH_ECC_EN.
+        /** rpt4_reserved7 : RO; bitpos: [12:8]; default: 0;
+         *  Reserved.
          */
-        uint32_t flash_ecc_en:1;
+        uint32_t rpt4_reserved7:5;
         /** force_send_resume : RO; bitpos: [13]; default: 0;
          *  The value of FORCE_SEND_RESUME.
          */
@@ -1453,10 +1441,10 @@ typedef union {
          *  If any bit in RD_DIS is 1, then it indicates a programming error.
          */
         uint32_t rd_dis_err:7;
-        /** dis_rtc_ram_boot_err : RO; bitpos: [7]; default: 0;
-         *  If DIS_RTC_RAM_BOOT is 1, then it indicates a programming error.
+        /** rpt4_reserved5_err : RO; bitpos: [7]; default: 0;
+         *  Reserved.
          */
-        uint32_t dis_rtc_ram_boot_err:1;
+        uint32_t rpt4_reserved5_err:1;
         /** dis_icache_err : RO; bitpos: [8]; default: 0;
          *  If DIS_ICACHE is 1, then it indicates a programming error.
          */
@@ -1477,10 +1465,10 @@ typedef union {
          *  If DIS_FORCE_DOWNLOAD is 1, then it indicates a programming error.
          */
         uint32_t dis_force_download_err:1;
-        /** dis_usb_err : RO; bitpos: [13]; default: 0;
-         *  If DIS_USB is 1, then it indicates a programming error.
+        /** rpt4_reserved6_err : RO; bitpos: [13]; default: 0;
+         *  Reserved.
          */
-        uint32_t dis_usb_err:1;
+        uint32_t rpt4_reserved6_err:1;
         /** dis_twai_err : RO; bitpos: [14]; default: 0;
          *  If DIS_TWAI is 1, then it indicates a programming error.
          */
@@ -1636,10 +1624,10 @@ typedef union {
          *  If UART_PRINT_CHANNEL is 1, then it indicates a programming error.
          */
         uint32_t uart_print_channel_err:1;
-        /** flash_ecc_mode_err : RO; bitpos: [3]; default: 0;
-         *  If FLASH_ECC_MODE is 1, then it indicates a programming error.
+        /** rpt4_reserved8_err : RO; bitpos: [3]; default: 0;
+         *  Reserved.
          */
-        uint32_t flash_ecc_mode_err:1;
+        uint32_t rpt4_reserved8_err:1;
         /** dis_usb_download_mode_err : RO; bitpos: [4]; default: 0;
          *  If DIS_USB_DOWNLOAD_MODE is 1, then it indicates a programming error.
          */
@@ -1652,22 +1640,10 @@ typedef union {
          *  If any bit in UART_PRINT_CONTROL is 1, then it indicates a programming error.
          */
         uint32_t uart_print_control_err:2;
-        /** pin_power_selection_err : RO; bitpos: [8]; default: 0;
-         *  If PIN_POWER_SELECTION is 1, then it indicates a programming error.
-         */
-        uint32_t pin_power_selection_err:1;
-        /** flash_type_err : RO; bitpos: [9]; default: 0;
-         *  If FLASH_TYPE is 1, then it indicates a programming error.
-         */
-        uint32_t flash_type_err:1;
-        /** flash_page_size_err : RO; bitpos: [11:10]; default: 0;
-         *  If any bits in FLASH_PAGE_SIZE is 1, then it indicates a programming error.
-         */
-        uint32_t flash_page_size_err:2;
-        /** flash_ecc_en_err : RO; bitpos: [12]; default: 0;
-         *  If FLASH_ECC_EN_ERR is 1, then it indicates a programming error.
+        /** rpt4_reserved7 : RO; bitpos: [12:8]; default: 0;
+         *  Reserved.
          */
-        uint32_t flash_ecc_en_err:1;
+        uint32_t rpt4_reserved7:5;
         /** force_send_resume_err : RO; bitpos: [13]; default: 0;
          *  If FORCE_SEND_RESUME is 1, then it indicates a programming error.
          */