Kconfig: improve ESP_SLEEP_PSRAM/FLASH_LEAKAGE_WORKAROUND help doc

Closes https://github.com/espressif/esp-idf/issues/11558

components/esp_hw_support/Kconfig

@@ -70,6 +70,49 @@ menu "Hardware Settings"
                 to ESP_PD_OPTION_OFF. It should be noted that there is a risk in powering down flash, you can refer
                 `ESP-IDF Programming Guide/API Reference/System API/Sleep Modes/Power-down of Flash` for more details.
 
+        config ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND
+            bool "Pull-up Flash CS pin in light sleep"
+            depends on !APP_BUILD_TYPE_PURE_RAM_APP && !ESP_SLEEP_POWER_DOWN_FLASH \
+                && !PM_POWER_DOWN_PERIPHERAL_IN_LIGHT_SLEEP
+            default y
+            help
+                All IOs will be set to isolate(floating) state by default during sleep.
+                Since the power supply of SPI Flash is not lost during lightsleep, if its CS pin is recognized as
+                low level(selected state) in the floating state, there will be a large current leakage, and the
+                data in Flash may be corrupted by random signals on other SPI pins.
+                Select this option will set the CS pin of Flash to PULL-UP state during sleep, but this will
+                increase the sleep current about 10 uA.
+                If you are developing with esp32xx modules, you must select this option, but if you are developing
+                with chips, you can also pull up the CS pin of SPI Flash in the external circuit to save power
+                consumption caused by internal pull-up during sleep.
+                (!!! Don't deselect this option if you don't have external SPI Flash CS pin pullups.)
+
+        config ESP_SLEEP_PSRAM_LEAKAGE_WORKAROUND
+            bool "Pull-up PSRAM CS pin in light sleep"
+            depends on SPIRAM && !PM_POWER_DOWN_PERIPHERAL_IN_LIGHT_SLEEP
+            default y
+            help
+                All IOs will be set to isolate(floating) state by default during sleep.
+                Since the power supply of PSRAM is not lost during lightsleep, if its CS pin is recognized as
+                low level(selected state) in the floating state, there will be a large current leakage, and the
+                data in PSRAM may be corrupted by random signals on other SPI pins.
+                Select this option will set the CS pin of PSRAM to PULL-UP state during sleep, but this will
+                increase the sleep current about 10 uA.
+                If you are developing with esp32xx modules, you must select this option, but if you are developing
+                with chips, you can also pull up the CS pin of PSRAM in the external circuit to save power
+                consumption caused by internal pull-up during sleep.
+                (!!! Don't deselect this option if you don't have external PSRAM CS pin pullups.)
+
+        config ESP_SLEEP_MSPI_NEED_ALL_IO_PU
+            bool "Pull-up all SPI pins in light sleep"
+            depends on !ESP_SLEEP_POWER_DOWN_FLASH && !PM_POWER_DOWN_PERIPHERAL_IN_LIGHT_SLEEP \
+                && (ESP_SLEEP_PSRAM_LEAKAGE_WORKAROUND || ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND)
+            default y if IDF_TARGET_ESP32C2 || IDF_TARGET_ESP32S3
+            help
+                To reduce leakage current, some types of SPI Flash/RAM only need to pull up the CS pin
+                during light sleep. But there are also some kinds of SPI Flash/RAM that need to pull up
+                all pins. It depends on the SPI Flash/RAM chip used.
+
         config ESP_SLEEP_RTC_BUS_ISO_WORKAROUND
             bool
             default y if IDF_TARGET_ESP32 || IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
@@ -93,35 +136,6 @@ menu "Hardware Settings"
                 This option provides a software workaround for this issue. Configure to isolate all
                 GPIO pins in sleep state.
 
-        config ESP_SLEEP_PSRAM_LEAKAGE_WORKAROUND
-            bool "PSRAM leakage current workaround in light sleep"
-            depends on SPIRAM
-            default y
-            help
-                When the CS pin of SPIRAM is not pulled up, the sleep current will
-                increase during light sleep. If the CS pin of SPIRAM has an external
-                pull-up, you do not need to select this option, otherwise, you
-                should enable this option.
-
-        config ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND
-            bool "Flash leakage current workaround in light sleep"
-            depends on !APP_BUILD_TYPE_PURE_RAM_APP
-            default y
-            help
-                When the CS pin of Flash is not pulled up, the sleep current will
-                increase during light sleep. If the CS pin of Flash has an external
-                pull-up, you do not need to select this option, otherwise, you
-                should enable this option.
-
-        config ESP_SLEEP_MSPI_NEED_ALL_IO_PU
-            bool "All pins of mspi need pull up"
-            depends on ESP_SLEEP_PSRAM_LEAKAGE_WORKAROUND || ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND
-            default y if IDF_TARGET_ESP32C2 || IDF_TARGET_ESP32S3
-            help
-                To reduce leakage current, some types of SPI Flash/RAM only need to pull up the CS pin
-                during light sleep. But there are also some kinds of SPI Flash/RAM that need to pull up
-                all pins. It depends on the SPI Flash/RAM chip used.
-
         config ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY
             int "Extra delay in deep sleep wake stub (in us)"
             depends on IDF_TARGET_ESP32 || IDF_TARGET_ESP32S3