esp32: modify WiFi Kconfig in order to achieve better compatility

and performance

components/esp32/Kconfig

@@ -958,15 +958,19 @@ menu Wi-Fi
 
     config ESP32_WIFI_STATIC_RX_BUFFER_NUM
         int "Max number of WiFi static RX buffers"
-        range 2 25
-        default 10
+        range 2 25 if !WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST
+        range 8 25 if WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST
+        default 10 if !WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST
+        default 16 if WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST
         help
             Set the number of WiFi static RX buffers. Each buffer takes approximately 1.6KB of RAM.
             The static rx buffers are allocated when esp_wifi_init is called, they are not freed
             until esp_wifi_deinit is called.
 
             WiFi hardware use these buffers to receive all 802.11 frames.
-            A higher number may allow higher throughput but increases memory use.
+            A higher number may allow higher throughput but increases memory use. If ESP32_WIFI_AMPDU_RX_ENABLED
+            is enabled, this value is recommended to set equal or bigger than ESP32_WIFI_RX_BA_WIN in order to
+            achieve better throughput and compatibility with both stations and APs.
 
     config ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM
         int "Max number of WiFi dynamic RX buffers"
@@ -1079,13 +1083,17 @@ menu Wi-Fi
     config ESP32_WIFI_RX_BA_WIN
         int "WiFi AMPDU RX BA window size"
         depends on ESP32_WIFI_AMPDU_RX_ENABLED
-        range 2 32
-        default 6
-        help
-            Set the size of WiFi Block Ack RX window. Generally a bigger value means higher throughput but
-            more memory. Most of time we should NOT change the default value unless special reason, e.g.
-            test the maximum UDP RX throughput with iperf etc. For iperf test in shieldbox, the recommended
-            value is 9~12.
+        range 2 32 if !WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST
+        range 16 32 if WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST
+        default 6 if !WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST
+        default 16 if WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST
+        help
+            Set the size of WiFi Block Ack RX window. Generally a bigger value means higher throughput and better
+            compatibility but more memory. Most of time we should NOT change the default value unless special
+            reason, e.g. test the maximum UDP RX throughput with iperf etc. For iperf test in shieldbox, the
+            recommended value is 9~12. If PSRAM is used and WiFi memory is prefered to allocat in PSRAM first,
+            the default and minimum value should be 16 to achieve better throughput and compatibility with both
+            stations and APs.
 
     config ESP32_WIFI_NVS_ENABLED
         bool "WiFi NVS flash"