efuse: Fix len of SOFT_DIS_JTAG for esp32c3 and esp32h2

components/efuse/esp32c3/esp_efuse_table.c

@@ -9,7 +9,7 @@
 #include <assert.h>
 #include "esp_efuse_table.h"
 
-// md5_digest_table 9e42b2f9dd879191ca75ad0cf50841a1
+// md5_digest_table 7a50fdd084e3b80b143c5bd2a36f9c26
 // This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
 // If you want to change some fields, you need to change esp_efuse_table.csv file
 // then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.
@@ -192,7 +192,7 @@ static const esp_efuse_desc_t JTAG_SEL_ENABLE[] = {
 };
 
 static const esp_efuse_desc_t SOFT_DIS_JTAG[] = {
-    {EFUSE_BLK0, 48, 2}, 	 // Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.,
+    {EFUSE_BLK0, 48, 3}, 	 // Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.,
 };
 
 static const esp_efuse_desc_t DIS_PAD_JTAG[] = {

components/efuse/esp32c3/esp_efuse_table.csv

@@ -59,7 +59,7 @@
         DIS_USB,                          EFUSE_BLK0,   45,    1,     Disable USB function
         DIS_CAN,                          EFUSE_BLK0,   46,    1,     Disable CAN function
         JTAG_SEL_ENABLE,                  EFUSE_BLK0,   47,    1,     Set this bit to enable selection between usb_to_jtag and pad_to_jtag through strapping gpio10 when both reg_dis_usb_jtag and reg_dis_pad_jtag are equal to 0.
-        SOFT_DIS_JTAG,                    EFUSE_BLK0,   48,    2,     Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.
+        SOFT_DIS_JTAG,                    EFUSE_BLK0,   48,    3,     Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.
         DIS_PAD_JTAG,                     EFUSE_BLK0,   51,    1,     Disable JTAG in the hard way. JTAG is disabled permanently.
         DIS_DOWNLOAD_MANUAL_ENCRYPT,      EFUSE_BLK0,   52,    1,     Disable flash encryption when in download boot modes.
         USB_DREFH,                        EFUSE_BLK0,   53,    2,     Controls single-end input threshold vrefh 1.76 V to 2 V with step of 80 mV stored in eFuse.

components/efuse/esp32c3/include/esp_efuse_table.h

@@ -9,7 +9,7 @@ extern "C" {
 #endif
 
 
-// md5_digest_table 9e42b2f9dd879191ca75ad0cf50841a1
+// md5_digest_table 7a50fdd084e3b80b143c5bd2a36f9c26
 // This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
 // If you want to change some fields, you need to change esp_efuse_table.csv file
 // then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.

components/efuse/esp32h2/esp_efuse_table.c

@@ -9,7 +9,7 @@
 #include <assert.h>
 #include "esp_efuse_table.h"
 
-// md5_digest_table aa238a3a131bf64a9386d3d4ce86a237
+// md5_digest_table 54e3ee07e1f682ea20e8af0561df669c
 // This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
 // If you want to change some fields, you need to change esp_efuse_table.csv file
 // then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.
@@ -192,7 +192,7 @@ static const esp_efuse_desc_t JTAG_SEL_ENABLE[] = {
 };
 
 static const esp_efuse_desc_t SOFT_DIS_JTAG[] = {
-    {EFUSE_BLK0, 48, 2}, 	 // Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.,
+    {EFUSE_BLK0, 48, 3}, 	 // Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.,
 };
 
 static const esp_efuse_desc_t DIS_PAD_JTAG[] = {

components/efuse/esp32h2/esp_efuse_table.csv

@@ -60,7 +60,7 @@
         DIS_USB,                          EFUSE_BLK0,   45,    1,     Disable USB function
         DIS_CAN,                          EFUSE_BLK0,   46,    1,     Disable CAN function
         JTAG_SEL_ENABLE,                  EFUSE_BLK0,   47,    1,     Set this bit to enable selection between usb_to_jtag and pad_to_jtag through strapping gpio10 when both reg_dis_usb_jtag and reg_dis_pad_jtag are equal to 0.
-        SOFT_DIS_JTAG,                    EFUSE_BLK0,   48,    2,     Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.
+        SOFT_DIS_JTAG,                    EFUSE_BLK0,   48,    3,     Set these bits to disable JTAG in the soft way (odd number 1 means disable). JTAG can be enabled in HMAC module.
         DIS_PAD_JTAG,                     EFUSE_BLK0,   51,    1,     Disable JTAG in the hard way. JTAG is disabled permanently.
         DIS_DOWNLOAD_MANUAL_ENCRYPT,      EFUSE_BLK0,   52,    1,     Disable flash encryption when in download boot modes.
         USB_DREFH,                        EFUSE_BLK0,   53,    2,     Controls single-end input threshold vrefh 1.76 V to 2 V with step of 80 mV stored in eFuse.

components/efuse/esp32h2/include/esp_efuse_table.h

@@ -9,7 +9,7 @@ extern "C" {
 #endif
 
 
-// md5_digest_table aa238a3a131bf64a9386d3d4ce86a237
+// md5_digest_table 54e3ee07e1f682ea20e8af0561df669c
 // This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
 // If you want to change some fields, you need to change esp_efuse_table.csv file
 // then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.

components/esptool_py/esptool

@@ -1 +1 @@
-Subproject commit 00f4bc967c94b25e3190ebc007a0bf132ae42f02
+Subproject commit 837c69028472f727574293fcee8d3f1cd5a8909e

docs/en/api-reference/system/inc/espefuse_summary_ESP32-C3.rst

@@ -56,7 +56,7 @@
                                             ag and pad_to_jtag through strapping gpio10 when b
                                             oth reg_dis_usb_jtag and reg_dis_pad_jtag are equa
                                             l to 0.                                           
-    SOFT_DIS_JTAG (BLOCK0)                   Software disables JTAG. When software disabled, JT = 0 R/W (0b00)
+    SOFT_DIS_JTAG (BLOCK0)                   Software disables JTAG. When software disabled, JT = 0 R/W (0b000)
                                             AG can be activated temporarily by HMAC peripheral
     DIS_PAD_JTAG (BLOCK0)                    Permanently disable JTAG access via pads. USB JTAG = False R/W (0b0)
                                             is controlled separately.                        

docs/en/api-reference/system/inc/espefuse_summary_ESP32-S3.rst

@@ -68,7 +68,7 @@
     BLOCK2_VERSION (BLOCK2)                  Version of BLOCK2                                  = With calibration R/W (0b001)
 
     Security fuses:
-    SOFT_DIS_JTAG (BLOCK0)                   Software disables JTAG. When software disabled, JT = False R/W (0b0)
+    SOFT_DIS_JTAG (BLOCK0)                   Software disables JTAG. When software disabled, JT = False R/W (0b000)
                                             AG can be activated temporarily by HMAC peripheral
     HARD_DIS_JTAG (BLOCK0)                   Hardware disables JTAG permanently                 = False R/W (0b0)
     DIS_DOWNLOAD_MANUAL_ENCRYPT (BLOCK0)     Disables flash encryption when in download boot mo = False R/W (0b0)