docs:add chiptype and link to gpio.h

components/driver/include/driver/gpio.h

@@ -72,9 +72,9 @@ esp_err_t gpio_set_intr_type(gpio_num_t gpio_num, gpio_int_type_t intr_type);
 /**
  * @brief  Enable GPIO module interrupt signal
  *
- * @note Please do not use the interrupt of GPIO36 and GPIO39 when using ADC or Wi-Fi and Bluetooth with sleep mode enabled.
+ * @note ESP32: Please do not use the interrupt of GPIO36 and GPIO39 when using ADC or Wi-Fi and Bluetooth with sleep mode enabled.
  *       Please refer to the comments of `adc1_get_raw`.
- *       Please refer to section 3.11 of 'ECO_and_Workarounds_for_Bugs_in_ESP32' for the description of this issue.
+ *       Please refer to Section 3.11 of <a href="https://espressif.com/documentation/eco_and_workarounds_for_bugs_in_esp32_en.pdf">ESP32 ECO and Workarounds for Bugs</a> for the description of this issue.
  *       As a workaround, call adc_power_acquire() in the app. This will result in higher power consumption (by ~1mA),
  *       but will remove the glitches on GPIO36 and GPIO39.
  *
@@ -148,7 +148,7 @@ esp_err_t gpio_set_direction(gpio_num_t gpio_num, gpio_mode_t mode);
 /**
  * @brief  Configure GPIO pull-up/pull-down resistors
  *
- * Only pins that support both input & output have integrated pull-up and pull-down resistors. Input-only GPIOs 34-39 do not.
+ * @note ESP32: Only pins that support both input & output have integrated pull-up and pull-down resistors. Input-only GPIOs 34-39 do not.
  *
  * @param  gpio_num GPIO number. If you want to set pull up or down mode for e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
  * @param  pull GPIO pull up/down mode.
@@ -463,7 +463,7 @@ esp_err_t gpio_sleep_set_direction(gpio_num_t gpio_num, gpio_mode_t mode);
 /**
  * @brief  Configure GPIO pull-up/pull-down resistors at sleep
  *
- * Only pins that support both input & output have integrated pull-up and pull-down resistors. Input-only GPIOs 34-39 do not.
+ * @note ESP32: Only pins that support both input & output have integrated pull-up and pull-down resistors. Input-only GPIOs 34-39 do not.
  *
  * @param  gpio_num GPIO number. If you want to set pull up or down mode for e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
  * @param  pull GPIO pull up/down mode.