Rename include, use spaces instead of tabs

components/esp32/heap_alloc_caps.c

@@ -15,7 +15,7 @@
 
 #include <freertos/heap_regions.h>
 
-#include "heap_alloc_caps.h"
+#include "esp_heap_alloc_caps.h"
 #include "spiram.h"
 #include "esp_log.h"
 
@@ -40,23 +40,23 @@ Tag descriptors. These describe the capabilities of a bit of memory that's tagge
 Each tag contains NO_PRIOS entries; later entries are only taken if earlier ones can't fulfill the memory request.
 */
 static const uint32_t tagDesc[][NO_PRIOS]={
-	{ MALLOC_CAP_DMA|MALLOC_CAP_8BIT, MALLOC_CAP_32BIT, 0 },					//Tag 0: Plain ole D-port RAM
-	{ 0, MALLOC_CAP_DMA|MALLOC_CAP_8BIT, MALLOC_CAP_32BIT|MALLOC_CAP_EXEC },	//Tag 1: Plain ole D-port RAM which has an alias on the I-port
-	{ MALLOC_CAP_EXEC|MALLOC_CAP_32BIT, 0, 0 },									//Tag 2: IRAM
-	{ MALLOC_CAP_PID2, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT },					//Tag 3-8: PID 2-7 IRAM
-	{ MALLOC_CAP_PID3, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT },					//
-	{ MALLOC_CAP_PID4, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT },					//
-	{ MALLOC_CAP_PID5, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT },					//
-	{ MALLOC_CAP_PID6, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT },					//
-	{ MALLOC_CAP_PID7, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT },					//
-	{ MALLOC_CAP_PID2, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT },						//Tag 9-14: PID 2-7 DRAM
-	{ MALLOC_CAP_PID3, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT },						//
-	{ MALLOC_CAP_PID4, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT },						//
-	{ MALLOC_CAP_PID5, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT },						//
-	{ MALLOC_CAP_PID6, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT },						//
-	{ MALLOC_CAP_PID7, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT },						//
-	{ MALLOC_CAP_SPISRAM, 0, MALLOC_CAP_DMA|MALLOC_CAP_8BIT|MALLOC_CAP_32BIT}, //Tag 15: SPI SRAM data
-	{ MALLOC_CAP_INVALID, MALLOC_CAP_INVALID, MALLOC_CAP_INVALID } //End
+    { MALLOC_CAP_DMA|MALLOC_CAP_8BIT, MALLOC_CAP_32BIT, 0 },                    //Tag 0: Plain ole D-port RAM
+    { 0, MALLOC_CAP_DMA|MALLOC_CAP_8BIT, MALLOC_CAP_32BIT|MALLOC_CAP_EXEC },    //Tag 1: Plain ole D-port RAM which has an alias on the I-port
+    { MALLOC_CAP_EXEC|MALLOC_CAP_32BIT, 0, 0 },                                 //Tag 2: IRAM
+    { MALLOC_CAP_PID2, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT },                   //Tag 3-8: PID 2-7 IRAM
+    { MALLOC_CAP_PID3, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT },                   //
+    { MALLOC_CAP_PID4, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT },                   //
+    { MALLOC_CAP_PID5, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT },                   //
+    { MALLOC_CAP_PID6, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT },                   //
+    { MALLOC_CAP_PID7, 0, MALLOC_CAP_EXEC|MALLOC_CAP_32BIT },                   //
+    { MALLOC_CAP_PID2, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT },                     //Tag 9-14: PID 2-7 DRAM
+    { MALLOC_CAP_PID3, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT },                     //
+    { MALLOC_CAP_PID4, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT },                     //
+    { MALLOC_CAP_PID5, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT },                     //
+    { MALLOC_CAP_PID6, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT },                     //
+    { MALLOC_CAP_PID7, MALLOC_CAP_8BIT, MALLOC_CAP_32BIT },                     //
+    { MALLOC_CAP_SPISRAM, 0, MALLOC_CAP_DMA|MALLOC_CAP_8BIT|MALLOC_CAP_32BIT}, //Tag 15: SPI SRAM data
+    { MALLOC_CAP_INVALID, MALLOC_CAP_INVALID, MALLOC_CAP_INVALID } //End
 };
 
 /*
@@ -79,81 +79,81 @@ be sorted from low to high start address.
 This array is *NOT* const because it gets modified depending on what pools are/aren't available.
 */
 static HeapRegionTagged_t regions[]={
-	{ (uint8_t *)0x3F800000, 0x20000, 15, 0}, //SPI SRAM, if available
-	{ (uint8_t *)0x3FFAE000, 0x2000, 0, 0}, //pool 16 <- used for rom code
-	{ (uint8_t *)0x3FFB0000, 0x8000, 0, 0}, //pool 15 <- can be used for BT
-	{ (uint8_t *)0x3FFB8000, 0x8000, 0, 0}, //pool 14 <- can be used for BT
-	{ (uint8_t *)0x3FFC0000, 0x2000, 0, 0}, //pool 10-13, mmu page 0
-	{ (uint8_t *)0x3FFC2000, 0x2000, 0, 0}, //pool 10-13, mmu page 1
-	{ (uint8_t *)0x3FFC4000, 0x2000, 0, 0}, //pool 10-13, mmu page 2
-	{ (uint8_t *)0x3FFC6000, 0x2000, 0, 0}, //pool 10-13, mmu page 3
-	{ (uint8_t *)0x3FFC8000, 0x2000, 0, 0}, //pool 10-13, mmu page 4
-	{ (uint8_t *)0x3FFCA000, 0x2000, 0, 0}, //pool 10-13, mmu page 5
-	{ (uint8_t *)0x3FFCC000, 0x2000, 0, 0}, //pool 10-13, mmu page 6
-	{ (uint8_t *)0x3FFCE000, 0x2000, 0, 0}, //pool 10-13, mmu page 7
-	{ (uint8_t *)0x3FFD0000, 0x2000, 0, 0}, //pool 10-13, mmu page 8
-	{ (uint8_t *)0x3FFD2000, 0x2000, 0, 0}, //pool 10-13, mmu page 9
-	{ (uint8_t *)0x3FFD4000, 0x2000, 0, 0}, //pool 10-13, mmu page 10
-	{ (uint8_t *)0x3FFD6000, 0x2000, 0, 0}, //pool 10-13, mmu page 11
-	{ (uint8_t *)0x3FFD8000, 0x2000, 0, 0}, //pool 10-13, mmu page 12
-	{ (uint8_t *)0x3FFDA000, 0x2000, 0, 0}, //pool 10-13, mmu page 13
-	{ (uint8_t *)0x3FFDC000, 0x2000, 0, 0}, //pool 10-13, mmu page 14
-	{ (uint8_t *)0x3FFDE000, 0x2000, 0, 0}, //pool 10-13, mmu page 15
-	{ (uint8_t *)0x3FFE0000, 0x4000, 1, 0x400BC000}, //pool 9 blk 1
-	{ (uint8_t *)0x3FFE4000, 0x4000, 1, 0x400B8000}, //pool 9 blk 0
-	{ (uint8_t *)0x3FFE8000, 0x8000, 1, 0x400B0000}, //pool 8 <- can be remapped to ROM, used for MAC dump
-	{ (uint8_t *)0x3FFF0000, 0x8000, 1, 0x400A8000}, //pool 7 <- can be used for MAC dump
-	{ (uint8_t *)0x3FFF8000, 0x4000, 1, 0x400A4000}, //pool 6 blk 1 <- can be used as trace memory
-	{ (uint8_t *)0x3FFFC000, 0x4000, 1, 0x400A0000}, //pool 6 blk 0 <- can be used as trace memory
-	{ (uint8_t *)0x40070000, 0x8000, 2, 0}, //pool 0
-	{ (uint8_t *)0x40078000, 0x8000, 2, 0}, //pool 1
-	{ (uint8_t *)0x40080000, 0x2000, 2, 0}, //pool 2-5, mmu page 0
-	{ (uint8_t *)0x40082000, 0x2000, 2, 0}, //pool 2-5, mmu page 1
-	{ (uint8_t *)0x40084000, 0x2000, 2, 0}, //pool 2-5, mmu page 2
-	{ (uint8_t *)0x40086000, 0x2000, 2, 0}, //pool 2-5, mmu page 3
-	{ (uint8_t *)0x40088000, 0x2000, 2, 0}, //pool 2-5, mmu page 4
-	{ (uint8_t *)0x4008A000, 0x2000, 2, 0}, //pool 2-5, mmu page 5
-	{ (uint8_t *)0x4008C000, 0x2000, 2, 0}, //pool 2-5, mmu page 6
-	{ (uint8_t *)0x4008E000, 0x2000, 2, 0}, //pool 2-5, mmu page 7
-	{ (uint8_t *)0x40090000, 0x2000, 2, 0}, //pool 2-5, mmu page 8
-	{ (uint8_t *)0x40092000, 0x2000, 2, 0}, //pool 2-5, mmu page 9
-	{ (uint8_t *)0x40094000, 0x2000, 2, 0}, //pool 2-5, mmu page 10
-	{ (uint8_t *)0x40096000, 0x2000, 2, 0}, //pool 2-5, mmu page 11
-	{ (uint8_t *)0x40098000, 0x2000, 2, 0}, //pool 2-5, mmu page 12
-	{ (uint8_t *)0x4009A000, 0x2000, 2, 0}, //pool 2-5, mmu page 13
-	{ (uint8_t *)0x4009C000, 0x2000, 2, 0}, //pool 2-5, mmu page 14
-	{ (uint8_t *)0x4009E000, 0x2000, 2, 0}, //pool 2-5, mmu page 15
-	{ NULL, 0, 0, 0} //end
+    { (uint8_t *)0x3F800000, 0x20000, 15, 0}, //SPI SRAM, if available
+    { (uint8_t *)0x3FFAE000, 0x2000, 0, 0}, //pool 16 <- used for rom code
+    { (uint8_t *)0x3FFB0000, 0x8000, 0, 0}, //pool 15 <- can be used for BT
+    { (uint8_t *)0x3FFB8000, 0x8000, 0, 0}, //pool 14 <- can be used for BT
+    { (uint8_t *)0x3FFC0000, 0x2000, 0, 0}, //pool 10-13, mmu page 0
+    { (uint8_t *)0x3FFC2000, 0x2000, 0, 0}, //pool 10-13, mmu page 1
+    { (uint8_t *)0x3FFC4000, 0x2000, 0, 0}, //pool 10-13, mmu page 2
+    { (uint8_t *)0x3FFC6000, 0x2000, 0, 0}, //pool 10-13, mmu page 3
+    { (uint8_t *)0x3FFC8000, 0x2000, 0, 0}, //pool 10-13, mmu page 4
+    { (uint8_t *)0x3FFCA000, 0x2000, 0, 0}, //pool 10-13, mmu page 5
+    { (uint8_t *)0x3FFCC000, 0x2000, 0, 0}, //pool 10-13, mmu page 6
+    { (uint8_t *)0x3FFCE000, 0x2000, 0, 0}, //pool 10-13, mmu page 7
+    { (uint8_t *)0x3FFD0000, 0x2000, 0, 0}, //pool 10-13, mmu page 8
+    { (uint8_t *)0x3FFD2000, 0x2000, 0, 0}, //pool 10-13, mmu page 9
+    { (uint8_t *)0x3FFD4000, 0x2000, 0, 0}, //pool 10-13, mmu page 10
+    { (uint8_t *)0x3FFD6000, 0x2000, 0, 0}, //pool 10-13, mmu page 11
+    { (uint8_t *)0x3FFD8000, 0x2000, 0, 0}, //pool 10-13, mmu page 12
+    { (uint8_t *)0x3FFDA000, 0x2000, 0, 0}, //pool 10-13, mmu page 13
+    { (uint8_t *)0x3FFDC000, 0x2000, 0, 0}, //pool 10-13, mmu page 14
+    { (uint8_t *)0x3FFDE000, 0x2000, 0, 0}, //pool 10-13, mmu page 15
+    { (uint8_t *)0x3FFE0000, 0x4000, 1, 0x400BC000}, //pool 9 blk 1
+    { (uint8_t *)0x3FFE4000, 0x4000, 1, 0x400B8000}, //pool 9 blk 0
+    { (uint8_t *)0x3FFE8000, 0x8000, 1, 0x400B0000}, //pool 8 <- can be remapped to ROM, used for MAC dump
+    { (uint8_t *)0x3FFF0000, 0x8000, 1, 0x400A8000}, //pool 7 <- can be used for MAC dump
+    { (uint8_t *)0x3FFF8000, 0x4000, 1, 0x400A4000}, //pool 6 blk 1 <- can be used as trace memory
+    { (uint8_t *)0x3FFFC000, 0x4000, 1, 0x400A0000}, //pool 6 blk 0 <- can be used as trace memory
+    { (uint8_t *)0x40070000, 0x8000, 2, 0}, //pool 0
+    { (uint8_t *)0x40078000, 0x8000, 2, 0}, //pool 1
+    { (uint8_t *)0x40080000, 0x2000, 2, 0}, //pool 2-5, mmu page 0
+    { (uint8_t *)0x40082000, 0x2000, 2, 0}, //pool 2-5, mmu page 1
+    { (uint8_t *)0x40084000, 0x2000, 2, 0}, //pool 2-5, mmu page 2
+    { (uint8_t *)0x40086000, 0x2000, 2, 0}, //pool 2-5, mmu page 3
+    { (uint8_t *)0x40088000, 0x2000, 2, 0}, //pool 2-5, mmu page 4
+    { (uint8_t *)0x4008A000, 0x2000, 2, 0}, //pool 2-5, mmu page 5
+    { (uint8_t *)0x4008C000, 0x2000, 2, 0}, //pool 2-5, mmu page 6
+    { (uint8_t *)0x4008E000, 0x2000, 2, 0}, //pool 2-5, mmu page 7
+    { (uint8_t *)0x40090000, 0x2000, 2, 0}, //pool 2-5, mmu page 8
+    { (uint8_t *)0x40092000, 0x2000, 2, 0}, //pool 2-5, mmu page 9
+    { (uint8_t *)0x40094000, 0x2000, 2, 0}, //pool 2-5, mmu page 10
+    { (uint8_t *)0x40096000, 0x2000, 2, 0}, //pool 2-5, mmu page 11
+    { (uint8_t *)0x40098000, 0x2000, 2, 0}, //pool 2-5, mmu page 12
+    { (uint8_t *)0x4009A000, 0x2000, 2, 0}, //pool 2-5, mmu page 13
+    { (uint8_t *)0x4009C000, 0x2000, 2, 0}, //pool 2-5, mmu page 14
+    { (uint8_t *)0x4009E000, 0x2000, 2, 0}, //pool 2-5, mmu page 15
+    { NULL, 0, 0, 0} //end
 };
 
 
 //Modify regions array to disable the given range of memory.
 static void disable_mem_region(void *from, void *to) {
-	int i;
-	//Align from and to on word boundaries
-	from=(void*)((uint32_t)from&~3);
-	to=(void*)(((uint32_t)to+3)&~3);
-	for (i=0; regions[i].xSizeInBytes!=0; i++) {
-		void *regStart=regions[i].pucStartAddress;
-		void *regEnd=regions[i].pucStartAddress+regions[i].xSizeInBytes;
-		if (regStart>=from && regEnd<=to) {
-			//Entire region falls in the range. Disable entirely.
-			regions[i].xTag=-1;
-		} else if (regStart>=from && regEnd>to && regStart<to) {
-			//Start of the region falls in the range. Modify address/len.
-			int overlap=(uint8_t *)to-(uint8_t *)regStart;
-			regions[i].pucStartAddress+=overlap;
-			regions[i].xSizeInBytes-=overlap;
-			if (regions[i].xExecAddr) regions[i].xExecAddr+=overlap;
-		} else if (regStart<from && regEnd>from && regEnd<=to) {
-			//End of the region falls in the range. Modify length.
-			regions[i].xSizeInBytes-=(uint8_t *)regEnd-(uint8_t *)from;
-		} else if (regStart<from && regEnd>to) {
-			//Range punches a hole in the region! We do not support this.
-			ESP_EARLY_LOGE(TAG, "region %d: hole punching is not supported!", i);
-			regions[i].xTag=-1; //Just disable memory region. That'll teach them!
-		}
-	}
+    int i;
+    //Align from and to on word boundaries
+    from=(void*)((uint32_t)from&~3);
+    to=(void*)(((uint32_t)to+3)&~3);
+    for (i=0; regions[i].xSizeInBytes!=0; i++) {
+        void *regStart=regions[i].pucStartAddress;
+        void *regEnd=regions[i].pucStartAddress+regions[i].xSizeInBytes;
+        if (regStart>=from && regEnd<=to) {
+            //Entire region falls in the range. Disable entirely.
+            regions[i].xTag=-1;
+        } else if (regStart>=from && regEnd>to && regStart<to) {
+            //Start of the region falls in the range. Modify address/len.
+            int overlap=(uint8_t *)to-(uint8_t *)regStart;
+            regions[i].pucStartAddress+=overlap;
+            regions[i].xSizeInBytes-=overlap;
+            if (regions[i].xExecAddr) regions[i].xExecAddr+=overlap;
+        } else if (regStart<from && regEnd>from && regEnd<=to) {
+            //End of the region falls in the range. Modify length.
+            regions[i].xSizeInBytes-=(uint8_t *)regEnd-(uint8_t *)from;
+        } else if (regStart<from && regEnd>to) {
+            //Range punches a hole in the region! We do not support this.
+            ESP_EARLY_LOGE(TAG, "region %d: hole punching is not supported!", i);
+            regions[i].xTag=-1; //Just disable memory region. That'll teach them!
+        }
+    }
 }
 
 
@@ -170,52 +170,52 @@ ToDo: The regions are different when stuff like trace memory, BT, ... is used. M
 Same with loading of apps. Same with using SPI RAM.
 */
 void heap_alloc_caps_init() {
-	int i;
-	//Disable the bits of memory where this code is loaded.
-	disable_mem_region(&_bss_start, &_heap_start);
-	disable_mem_region((void*)0x3ffae000, (void*)0x3ffb0000); //knock out ROM data region
-	disable_mem_region((void*)0x40070000, (void*)0x40078000); //CPU0 cache region
-	disable_mem_region((void*)0x40078000, (void*)0x40080000); //CPU1 cache region
-	disable_mem_region((void*)0x40080000, (void*)0x400a0000); //pool 2-5
+    int i;
+    //Disable the bits of memory where this code is loaded.
+    disable_mem_region(&_bss_start, &_heap_start);
+    disable_mem_region((void*)0x3ffae000, (void*)0x3ffb0000); //knock out ROM data region
+    disable_mem_region((void*)0x40070000, (void*)0x40078000); //CPU0 cache region
+    disable_mem_region((void*)0x40078000, (void*)0x40080000); //CPU1 cache region
+    disable_mem_region((void*)0x40080000, (void*)0x400a0000); //pool 2-5
 
-	// TODO: this region should be checked, since we don't need to knock out all region finally
-	disable_mem_region((void*)0x3ffe0000, (void*)0x3ffe8000); //knock out ROM data region
+    // TODO: this region should be checked, since we don't need to knock out all region finally
+    disable_mem_region((void*)0x3ffe0000, (void*)0x3ffe8000); //knock out ROM data region
 
 #if CONFIG_MEMMAP_BT
-	disable_mem_region((void*)0x3ffb0000, (void*)0x3ffc0000); //knock out BT data region
+    disable_mem_region((void*)0x3ffb0000, (void*)0x3ffc0000); //knock out BT data region
 #endif
 
 #if CONFIG_MEMMAP_TRACEMEM
-	disable_mem_region((void*)0x3fff8000, (void*)0x40000000); //knock out trace mem region
+    disable_mem_region((void*)0x3fff8000, (void*)0x40000000); //knock out trace mem region
 #endif
 
 #if 0
-	enable_spi_sram();
+    enable_spi_sram();
 #else
-	disable_mem_region((void*)0x3f800000, (void*)0x3f820000); //SPI SRAM not installed
+    disable_mem_region((void*)0x3f800000, (void*)0x3f820000); //SPI SRAM not installed
 #endif
 
-	//The heap allocator will treat every region given to it as separate. In order to get bigger ranges of contiguous memory,
-	//it's useful to coalesce adjacent regions that have the same tag.
+    //The heap allocator will treat every region given to it as separate. In order to get bigger ranges of contiguous memory,
+    //it's useful to coalesce adjacent regions that have the same tag.
 
-	for (i=1; regions[i].xSizeInBytes!=0; i++) {
-		if (regions[i].pucStartAddress == (regions[i-1].pucStartAddress + regions[i-1].xSizeInBytes) &&
-									regions[i].xTag == regions[i-1].xTag ) {
-			regions[i-1].xTag=-1;
-			regions[i].pucStartAddress=regions[i-1].pucStartAddress;
-			regions[i].xSizeInBytes+=regions[i-1].xSizeInBytes;
-		}
-	}
+    for (i=1; regions[i].xSizeInBytes!=0; i++) {
+        if (regions[i].pucStartAddress == (regions[i-1].pucStartAddress + regions[i-1].xSizeInBytes) &&
+                                    regions[i].xTag == regions[i-1].xTag ) {
+            regions[i-1].xTag=-1;
+            regions[i].pucStartAddress=regions[i-1].pucStartAddress;
+            regions[i].xSizeInBytes+=regions[i-1].xSizeInBytes;
+        }
+    }
 
-	ESP_EARLY_LOGI(TAG, "Initializing heap allocator:");
-	for (i=0; regions[i].xSizeInBytes!=0; i++) {
-		if (regions[i].xTag != -1) {
-		    ESP_EARLY_LOGI(TAG, "Region %02d: %08X len %08X tag %d", i,
-		            (int)regions[i].pucStartAddress, regions[i].xSizeInBytes, regions[i].xTag);
-		}
-	}
-	//Initialize the malloc implementation.
-	vPortDefineHeapRegionsTagged( regions );
+    ESP_EARLY_LOGI(TAG, "Initializing heap allocator:");
+    for (i=0; regions[i].xSizeInBytes!=0; i++) {
+        if (regions[i].xTag != -1) {
+            ESP_EARLY_LOGI(TAG, "Region %02d: %08X len %08X tag %d", i,
+                    (int)regions[i].pucStartAddress, regions[i].xSizeInBytes, regions[i].xTag);
+        }
+    }
+    //Initialize the malloc implementation.
+    vPortDefineHeapRegionsTagged( regions );
 }
 
 /*
@@ -223,7 +223,7 @@ Standard malloc() implementation. Will return ho-hum byte-accessible data memory
 */
 void *pvPortMalloc( size_t xWantedSize )
 {
-	return pvPortMallocCaps( xWantedSize, MALLOC_CAP_8BIT );
+    return pvPortMallocCaps( xWantedSize, MALLOC_CAP_8BIT );
 }
 
 /*
@@ -231,30 +231,30 @@ Routine to allocate a bit of memory with certain capabilities. caps is a bitfiel
 */
 void *pvPortMallocCaps( size_t xWantedSize, uint32_t caps ) 
 {
-	int prio;
-	int tag, j;
-	void *ret=NULL;
-	uint32_t remCaps;
-	for (prio=0; prio<NO_PRIOS; prio++) {
-		//Iterate over tag descriptors for this priority
-		for (tag=0; tagDesc[tag][prio]!=MALLOC_CAP_INVALID; tag++) {
-			if ((tagDesc[tag][prio]&caps)!=0) {
-				//Tag has at least one of the caps requested. If caps has other bits set that this prio
-				//doesn't cover, see if they're available in other prios.
-				remCaps=caps&(~tagDesc[tag][prio]); //Remaining caps to be fulfilled
-				j=prio+1;
-				while (remCaps!=0 && j<NO_PRIOS) {
-					remCaps=remCaps&(~tagDesc[tag][j]);
-					j++;
-				}
-				if (remCaps==0) {
-					//This tag can satisfy all the requested capabilities. See if we can grab some memory using it.
-					ret=pvPortMallocTagged(xWantedSize, tag);
-					if (ret!=NULL) return ret;
-				}
-			}
-		}
-	}
-	//Nothing usable found.
-	return NULL;
+    int prio;
+    int tag, j;
+    void *ret=NULL;
+    uint32_t remCaps;
+    for (prio=0; prio<NO_PRIOS; prio++) {
+        //Iterate over tag descriptors for this priority
+        for (tag=0; tagDesc[tag][prio]!=MALLOC_CAP_INVALID; tag++) {
+            if ((tagDesc[tag][prio]&caps)!=0) {
+                //Tag has at least one of the caps requested. If caps has other bits set that this prio
+                //doesn't cover, see if they're available in other prios.
+                remCaps=caps&(~tagDesc[tag][prio]); //Remaining caps to be fulfilled
+                j=prio+1;
+                while (remCaps!=0 && j<NO_PRIOS) {
+                    remCaps=remCaps&(~tagDesc[tag][j]);
+                    j++;
+                }
+                if (remCaps==0) {
+                    //This tag can satisfy all the requested capabilities. See if we can grab some memory using it.
+                    ret=pvPortMallocTagged(xWantedSize, tag);
+                    if (ret!=NULL) return ret;
+                }
+            }
+        }
+    }
+    //Nothing usable found.
+    return NULL;
 }

components/esp32/include/esp_heap_alloc_caps.h

@@ -0,0 +1,34 @@
+// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+#ifndef HEAP_ALLOC_CAPS_H
+#define HEAP_ALLOC_CAPS_H
+
+#define MALLOC_CAP_EXEC				(1<<0)	//Memory must be able to run executable code
+#define MALLOC_CAP_32BIT			(1<<1)	//Memory must allow for aligned 32-bit data accesses
+#define MALLOC_CAP_8BIT				(1<<2)	//Memory must allow for 8/16/...-bit data accesses
+#define MALLOC_CAP_DMA				(1<<3)	//Memory must be able to accessed by DMA
+#define MALLOC_CAP_PID2				(1<<4)	//Memory must be mapped to PID2 memory space
+#define MALLOC_CAP_PID3				(1<<5)	//Memory must be mapped to PID3 memory space
+#define MALLOC_CAP_PID4				(1<<6)	//Memory must be mapped to PID4 memory space
+#define MALLOC_CAP_PID5				(1<<7)	//Memory must be mapped to PID5 memory space
+#define MALLOC_CAP_PID6				(1<<8)	//Memory must be mapped to PID6 memory space
+#define MALLOC_CAP_PID7				(1<<9)	//Memory must be mapped to PID7 memory space
+#define MALLOC_CAP_SPISRAM			(1<<10)	//Memory must be in SPI SRAM
+#define MALLOC_CAP_INVALID			(1<<31)	//Memory can't be used / list end marker
+
+
+void heap_alloc_caps_init();
+void *pvPortMallocCaps(size_t xWantedSize, uint32_t caps);
+
+#endif

components/freertos/tasks.c

@@ -3342,7 +3342,6 @@ TCB_t *pxNewTCB;
 BaseType_t xTaskGetAffinity( TaskHandle_t xTask )
 {
 	TCB_t *pxTCB;
-	UBaseType_t uxReturn;
 
 	pxTCB = prvGetTCBFromHandle( xTask );