Merge branch 'bugfix/update_esp32s3_docs' into 'master'

Doc:Bugfix/update esp32s3 docs

See merge request espressif/esp-idf!15390

docs/en/api-guides/wifi.rst

@@ -10,7 +10,7 @@ Wi-Fi Driver
 - Support WPA/WPA2/WPA3/WPA2-Enterprise and WPS
 - Support AMPDU, HT40, QoS and other key features
 - Support Modem-sleep
-- Support an Espressif-specific protocol which, in turn, supports up to **1 km** of data traffic
+- Support the Espressif-specific ESP-NOW protocol and Long Range mode, which supports up to **1 km** of data traffic
 - Up to 20 MBit/s TCP throughput and 30 MBit/s UDP throughput over the air
 - Support Sniffer
 - Support both fast scan and all-channel scan
@@ -1518,6 +1518,50 @@ The table below shows the best throughput results we got in Espressif's lab and
 
     When the throughput is tested by iperf example, the sdkconfig is :idf_file:`examples/wifi/iperf/sdkconfig.defaults.esp32c3`.
 
+.. only:: esp32s3
+
+     .. list-table::
+        :header-rows: 1
+        :widths: 10 10 10 15 20
+
+        * - Type/Throughput
+          - Air In Lab
+          - Shield-box
+          - Test Tool
+          - IDF Version (commit ID)
+        * - Raw 802.11 Packet RX
+          - N/A
+          - **130 MBit/s**
+          - Internal tool
+          - NA
+        * - Raw 802.11 Packet TX
+          - N/A
+          - **130 MBit/s**
+          - Internal tool
+          - NA
+        * - UDP RX
+          - 30 MBit/s
+          - 88 MBit/s
+          - iperf example
+          - 15575346
+        * - UDP TX
+          - 30 MBit/s
+          - 98 MBit/s
+          - iperf example
+          - 15575346
+        * - TCP RX
+          - 20 MBit/s
+          - 73 MBit/s
+          - iperf example
+          - 15575346
+        * - TCP TX
+          - 20 MBit/s
+          - 83 MBit/s
+          - iperf example
+          - 15575346
+
+    When the throughput is tested by iperf example, the sdkconfig is :idf_file:`examples/wifi/iperf/sdkconfig.defaults.esp32s3`.
+
 Wi-Fi 80211 Packet Send
 ---------------------------
 
@@ -1773,9 +1817,9 @@ Wi-Fi Fragment
 
     supports Wi-Fi receiving fragment, but doesn't support Wi-Fi transmitting fragment.
 
-.. only:: esp32c3
+.. only:: esp32c3 or esp32s3
 
-    ESP32C3 supports Wi-Fi receiving and transmitting fragment.
+    {IDF_TARGET_NAME} supports Wi-Fi receiving and transmitting fragment.
 
 WPS Enrollee
 -------------------------
@@ -1898,10 +1942,32 @@ Increasing the size or number of the buffers mentioned above properly can improv
     **CACHE:**
 
      - :ref:`CONFIG_ESP32S2_INSTRUCTION_CACHE_SIZE`
-        Configure the size of the instruction cache.
+        Configure the size of the instruction Cache.
 
      - :ref:`CONFIG_ESP32S2_INSTRUCTION_CACHE_LINE_SIZE`
-        Configure the width of the instruction cache bus.
+        Configure the width of the instruction Cache bus.
+
+.. only:: esp32s3
+
+    **CACHE:**
+
+     - :ref:`CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE`
+        Configure the size of the instruction Cache.
+
+     - :ref:`CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_SIZE`
+        Configure the size of the instruction Cache bus.
+
+     - :ref:`CONFIG_ESP32S3_ICACHE_ASSOCIATED_WAYS`
+        Configure the associated ways of the instruction Cache.
+
+     - :ref:`CONFIG_ESP32S3_DATA_CACHE_SIZE`
+        Configure the size of the Data Cache.
+
+     - :ref:`CONFIG_ESP32S3_DATA_CACHE_LINE_SIZE`
+        Configure the line size of the Data Cache.
+
+     - :ref:`CONFIG_ESP32S3_DCACHE_ASSOCIATED_WAYS`
+        Configure the associated ways of the Data Cache.
 
 .. note::
     The buffer size mentioned above is fixed as 1.6 KB.
@@ -2346,7 +2412,7 @@ The parameters not mentioned in the following table should be set to the default
      - **Minimum rank**
         This is the minimum configuration rank of {IDF_TARGET_NAME}. The protocol stack only uses the necessary memory for running. It is suitable for scenarios that have no requirement for performance and the application requires lots of space.
 
-.. only:: esp32c3
+.. only:: esp32c3 or esp32s3
 
     **Ranks:**
 

docs/zh_CN/api-guides/wifi.rst

@@ -1517,6 +1517,50 @@ AP 睡眠
 
     使用 iperf example 测试吞吐量时，sdkconfig 是 :idf_file:` 示例/wifi/iperf/sdkconfig.defaults.esp32c3`。
 
+.. only:: esp32s3
+
+     .. list-table::
+        :header-rows: 1
+        :widths: 10 10 10 15 20
+
+        * - 类型/吞吐量
+          - 实验室空气状况
+          - 屏蔽箱
+          - 测试工具
+          - IDF 版本 (commit ID)
+        * - 原始 802.11 数据包接收数据
+          - N/A
+          - **130 MBit/s**
+          - 内部工具
+          - N/A
+        * - 原始 802.11 数据包发送数据
+          - N/A
+          - **130 MBit/s**
+          - 内部工具
+          - N/A
+        * - UDP 接收数据
+          - 30 MBit/s
+          - 88 MBit/s
+          - iperf example
+          - 15575346
+        * - UDP 发送数据
+          - 30 MBit/s
+          - 98 MBit/s
+          - iperf example
+          - 15575346
+        * - TCP 接收数据
+          - 20 MBit/s
+          - 73 MBit/s
+          - iperf example
+          - 15575346
+        * - TCP 发送数据
+          - 20 MBit/s
+          - 83 MBit/s
+          - iperf example
+          - 15575346
+
+    使用 iperf example 测试吞吐量时，sdkconfig 是 :idf_file:` 示例/wifi/iperf/sdkconfig.defaults.esp32s3`。
+
 Wi-Fi 80211 数据包发送
 ---------------------------
 
@@ -1772,9 +1816,9 @@ Wi-Fi 分片
 
     支持 Wi-Fi 接收分片，但不支持 Wi-Fi 发送分片。
 
-.. only:: esp32c3
+.. only:: esp32c3 or esp32s3
 
-    ESP32C3 支持 Wi-Fi 接收和发送分片。
+    {IDF_TARGET_NAME} 支持 Wi-Fi 接收和发送分片。
 
 WPS 注册
 -------------------------
@@ -1902,6 +1946,28 @@ Wi-Fi 使用的堆内存峰值是 Wi-Fi 驱动程序 **理论上消耗的最大
      - :ref:`CONFIG_ESP32S2_INSTRUCTION_CACHE_LINE_SIZE`
         配置指令缓存总线的宽度。
 
+.. only:: esp32s3
+
+    **缓存：**
+
+     - :ref:`CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE`
+        配置指令缓存的大小。
+
+     - :ref:`CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_SIZE`
+        配置指令缓存总线的宽度。
+
+     - :ref:`CONFIG_ESP32S3_ICACHE_ASSOCIATED_WAYS`
+        配置指令缓存相连方式.
+
+     - :ref:`CONFIG_ESP32S3_DATA_CACHE_SIZE`
+        配置数据缓存的大小.
+
+     - :ref:`CONFIG_ESP32S3_DATA_CACHE_LINE_SIZE`
+        配置数据缓存行大小.
+
+     - :ref:`CONFIG_ESP32S3_DCACHE_ASSOCIATED_WAYS`
+        配置数据缓存相连方式.
+
 .. note::
     上述的缓冲区大小固定为 1.6 KB。
 
@@ -2345,7 +2411,7 @@ Wi-Fi 使用的堆内存峰值是 Wi-Fi 驱动程序 **理论上消耗的最大
      - **最小等级**
         {IDF_TARGET_NAME} 的最小配置等级。协议栈只使用运行所需的内存。适用于对性能没有要求，而应用程序需要大量内存的场景。
 
-.. only:: esp32c3
+.. only:: esp32c3 or esp32s3
 
     **等级：**