Merge branch 'esp32p4/add_mpi_support' into 'master'

feat(mpi): add MPI peripheral support for esp32p4

See merge request espressif/esp-idf!25110

components/hal/esp32p4/include/hal/mpi_ll.h

@@ -0,0 +1,151 @@
+/*
+ * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#pragma once
+
+#include <stdbool.h>
+#include <string.h>
+#include "hal/assert.h"
+#include "soc/rsa_reg.h"
+#include "soc/mpi_periph.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+static inline size_t mpi_ll_calculate_hardware_words(size_t words)
+{
+    return words;
+}
+
+// No need to initialize Power Control Registers in case of ESP32-P4
+static inline void mpi_ll_clear_power_control_bit(void)
+{
+}
+
+static inline void mpi_ll_set_power_control_bit(void)
+{
+}
+
+static inline void mpi_ll_enable_interrupt(void)
+{
+    REG_WRITE(RSA_INT_ENA_REG, 1);
+}
+
+static inline void mpi_ll_disable_interrupt(void)
+{
+    REG_WRITE(RSA_INT_ENA_REG, 0);
+}
+
+static inline void mpi_ll_clear_interrupt(void)
+{
+    REG_WRITE(RSA_INT_CLR_REG, 1);
+}
+
+static inline bool mpi_ll_check_memory_init_complete(void)
+{
+    return REG_READ(RSA_QUERY_CLEAN_REG) == 0;
+}
+
+static inline void mpi_ll_start_op(mpi_op_t op)
+{
+    REG_WRITE(MPI_LL_OPERATIONS[op], 1);
+}
+
+static inline bool mpi_ll_get_int_status(void)
+{
+    return REG_READ(RSA_QUERY_IDLE_REG) == 0;
+}
+
+/* Copy MPI bignum (p) to hardware memory block at 'mem_base' of mpi_param_t 'param'.
+
+   If num_words is higher than the number of words (n) in the bignum then
+   these additional words will be zeroed in the memory buffer.
+*/
+static inline void mpi_ll_write_to_mem_block(mpi_param_t param, size_t offset, const uint32_t* p, size_t n, size_t num_words)
+{
+    uint32_t mem_base = MPI_LL_BLOCK_BASES[param] + offset;
+    uint32_t* pbase = (uint32_t*) mem_base;
+    uint32_t copy_words = MIN(num_words, n);
+
+    /* Copy MPI data to memory block registers */
+    for (int i = 0; i < copy_words; i++) {
+        pbase[i] = p[i];
+    }
+
+    /* Zero any remaining memory block data */
+    for (int i = copy_words; i < num_words; i++) {
+        pbase[i] = 0;
+    }
+}
+
+static inline void mpi_ll_write_m_prime(uint32_t Mprime)
+{
+    REG_WRITE(RSA_M_PRIME_REG, Mprime);
+}
+
+static inline void mpi_ll_write_rinv(uint32_t rinv)
+{
+    REG_WRITE(MPI_LL_BLOCK_BASES[MPI_PARAM_Z], rinv);
+}
+
+static inline void mpi_ll_write_at_offset(mpi_param_t param, int offset, uint32_t value)
+{
+    uint32_t mem_base = MPI_LL_BLOCK_BASES[param] + offset;
+    REG_WRITE(mem_base, value);
+}
+
+/* Read MPI bignum (p) back from hardware memory block.
+
+   Reads z_words words from block.
+*/
+static inline void mpi_ll_read_from_mem_block(uint32_t* p, size_t n, size_t num_words)
+{
+    uint32_t mem_base = MPI_LL_BLOCK_BASES[MPI_PARAM_Z];
+    /* Copy data from memory block registers */
+    const size_t REG_WIDTH = sizeof(uint32_t);
+    for (size_t i = 0; i < num_words; i++) {
+        p[i] = REG_READ(mem_base + (i * REG_WIDTH));
+    }
+    /* Zero any remaining limbs in the bignum, if the buffer is bigger
+       than num_words */
+    for (size_t i = num_words; i < n; i++) {
+        p[i] = 0;
+    }
+}
+
+static inline void mpi_ll_set_mode(size_t length)
+{
+    REG_WRITE(RSA_MODE_REG, length);
+}
+
+static inline void mpi_ll_disable_constant_time(void)
+{
+    REG_WRITE(RSA_CONSTANT_TIME_REG, 0);
+}
+
+static inline void mpi_ll_enable_constant_time(void)
+{
+    REG_WRITE(RSA_CONSTANT_TIME_REG, 1);
+}
+
+static inline void mpi_ll_disable_search(void)
+{
+    REG_WRITE(RSA_SEARCH_ENABLE_REG, 0);
+}
+
+static inline void mpi_ll_enable_search(void)
+{
+    REG_WRITE(RSA_SEARCH_ENABLE_REG, 1);
+}
+
+static inline void mpi_ll_set_search_position(size_t pos)
+{
+    REG_WRITE(RSA_SEARCH_POS_REG, pos);
+}
+
+#ifdef __cplusplus
+}
+#endif

components/soc/esp32p4/include/soc/Kconfig.soc_caps.in

@@ -47,6 +47,10 @@ config SOC_SYSTIMER_SUPPORTED
     bool
     default y
 
+config SOC_MPI_SUPPORTED
+    bool
+    default y
+
 config SOC_ECC_SUPPORTED
     bool
     default y
@@ -559,9 +563,17 @@ config SOC_PARLIO_TX_RX_SHARE_INTERRUPT
     bool
     default y
 
+config SOC_MPI_MEM_BLOCKS_NUM
+    int
+    default 4
+
+config SOC_MPI_OPERATIONS_NUM
+    int
+    default 3
+
 config SOC_RSA_MAX_BIT_LEN
     int
-    default 3072
+    default 4096
 
 config SOC_SHA_DMA_MAX_BUFFER_SIZE
     int

components/soc/esp32p4/include/soc/interrupts.h

@@ -84,7 +84,7 @@ typedef enum {
     ETS_AXI_PDMA_OUT_CH1_INTR_SOURCE,
 
     ETS_AXI_PDMA_OUT_CH2_INTR_SOURCE,
-    ETS_RSA_INTA_SOURCE,
+    ETS_RSA_INTR_SOURCE,
     ETS_AES_INTR_SOURCE,
     ETS_SHA_INTR_SOURCE,
     ETS_ECC_INTR_SOURCE,

components/soc/esp32p4/include/soc/soc_caps.h

@@ -55,7 +55,7 @@
 // #define SOC_I2C_SUPPORTED               1  //TODO: IDF-6507, TODO: IDF-7491
 #define SOC_SYSTIMER_SUPPORTED          1
 // #define SOC_AES_SUPPORTED               1  //TODO: IDF-6519
-// #define SOC_MPI_SUPPORTED               1
+#define SOC_MPI_SUPPORTED               1
 // #define SOC_SHA_SUPPORTED               1  //TODO: IDF-7541
 // #define SOC_HMAC_SUPPORTED              1  //TODO: IDF-7543
 // #define SOC_DIG_SIGN_SUPPORTED          1  //TODO: IDF-6518
@@ -298,8 +298,12 @@
 #define SOC_PARLIO_RX_UNIT_MAX_DATA_WIDTH    16  /*!< Number of data lines of the RX unit */
 #define SOC_PARLIO_TX_RX_SHARE_INTERRUPT     1   /*!< TX and RX unit share the same interrupt source number */
 
+/*--------------------------- MPI CAPS ---------------------------------------*/
+#define SOC_MPI_MEM_BLOCKS_NUM (4)
+#define SOC_MPI_OPERATIONS_NUM (3)
+
 /*--------------------------- RSA CAPS ---------------------------------------*/
-#define SOC_RSA_MAX_BIT_LEN    (3072)
+#define SOC_RSA_MAX_BIT_LEN    (4096)
 
 // TODO: IDF-5353 (Copy from esp32c3, need check)
 /*--------------------------- SHA CAPS ---------------------------------------*/

components/soc/esp32p4/mpi_periph.c

@@ -0,0 +1,21 @@
+/*
+ * SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include "soc/rsa_reg.h"
+#include "soc/mpi_periph.h"
+
+const uint32_t MPI_LL_BLOCK_BASES[4] = {
+    RSA_X_MEM,
+    RSA_Y_MEM,
+    RSA_Z_MEM,
+    RSA_M_MEM,
+};
+
+const uint32_t MPI_LL_OPERATIONS[3] = {
+    RSA_SET_START_MULT_REG,
+    RSA_SET_START_MODMULT_REG,
+    RSA_SET_START_MODEXP_REG,
+};