lly
bcdd470618
ble_mesh: example: Add gpio option for ESP32C3-DevKitC
|
5 سال پیش | |
|---|---|---|
| .. | ||
| main | 5 سال پیش | |
| tutorial | 5 سال پیش | |
| CMakeLists.txt | 5 سال پیش | |
| Makefile | 5 سال پیش | |
| README.md | 5 سال پیش | |
| sdkconfig.ci.bluedroid | 5 سال پیش | |
| sdkconfig.ci.bluedroid_deinit | 5 سال پیش | |
| sdkconfig.ci.model | 5 سال پیش | |
| sdkconfig.ci.nimble | 5 سال پیش | |
| sdkconfig.ci.nimble_deinit | 5 سال پیش | |
| sdkconfig.ci.proxy00 | 5 سال پیش | |
| sdkconfig.ci.proxy01 | 5 سال پیش | |
| sdkconfig.ci.proxy02 | 5 سال پیش | |
| sdkconfig.ci.proxy03 | 5 سال پیش | |
| sdkconfig.ci.proxy04 | 5 سال پیش | |
| sdkconfig.ci.proxy05 | 5 سال پیش | |
| sdkconfig.defaults | 5 سال پیش | |
README.md
| Supported Targets | ESP32 |
|---|
ESP BLE Mesh Client Model Demo
This demo shows how to use the Generic OnOff Client Model to get/set the generic on/off state. The basic procedures are as follows:
- Download and run this demo.
- Use any app for BLE Mesh to provision this device as well as the device running the Generic OnOff Server demo.
- After both onoff client and server devices are provisioned, use UART1 to input the unicast address of the element within the server device.
- The Generic OnOff Client will start to get and set Generic OnOff states periodically.
Notes:
- The NetKey index and AppKey index are fixed to 0x0000 in this demo.
- If the client device is re-provisioned, but the server device is not, the first few get/set messages from the client will be treated as replay attacks. To avoid this, both devices should be re-provisioned prior to transmitting messages.