| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161 |
- # field_name, | efuse_block, | bit_start, | bit_count, |comment #
- # | (EFUSE_BLK0 | (0..255) | (1-256) | #
- # | EFUSE_BLK1 | | | #
- # | ...) | | | #
- ##########################################################################
- # !!!!!!!!!!! #
- # After editing this file, run the command manually "idf.py efuse-common-table"
- # this will generate new source files, next rebuild all the sources.
- # !!!!!!!!!!! #
- # This file was generated by regtools.py based on the efuses.yaml file with the version: 4df10f83de85f2d830b7c466aabb28e7
- WR_DIS, EFUSE_BLK0, 0, 32, [] Disable programming of individual eFuses
- WR_DIS.RD_DIS, EFUSE_BLK0, 0, 1, [] wr_dis of RD_DIS
- WR_DIS.DIS_ICACHE, EFUSE_BLK0, 2, 1, [] wr_dis of DIS_ICACHE
- WR_DIS.DIS_USB_JTAG, EFUSE_BLK0, 2, 1, [] wr_dis of DIS_USB_JTAG
- WR_DIS.POWERGLITCH_EN, EFUSE_BLK0, 2, 1, [] wr_dis of POWERGLITCH_EN
- WR_DIS.DIS_FORCE_DOWNLOAD, EFUSE_BLK0, 2, 1, [] wr_dis of DIS_FORCE_DOWNLOAD
- WR_DIS.SPI_DOWNLOAD_MSPI_DIS, EFUSE_BLK0, 2, 1, [] wr_dis of SPI_DOWNLOAD_MSPI_DIS
- WR_DIS.DIS_TWAI, EFUSE_BLK0, 2, 1, [WR_DIS.DIS_CAN] wr_dis of DIS_TWAI
- WR_DIS.JTAG_SEL_ENABLE, EFUSE_BLK0, 2, 1, [] wr_dis of JTAG_SEL_ENABLE
- WR_DIS.DIS_PAD_JTAG, EFUSE_BLK0, 2, 1, [] wr_dis of DIS_PAD_JTAG
- WR_DIS.DIS_DOWNLOAD_MANUAL_ENCRYPT, EFUSE_BLK0, 2, 1, [] wr_dis of DIS_DOWNLOAD_MANUAL_ENCRYPT
- WR_DIS.WDT_DELAY_SEL, EFUSE_BLK0, 3, 1, [] wr_dis of WDT_DELAY_SEL
- WR_DIS.SPI_BOOT_CRYPT_CNT, EFUSE_BLK0, 4, 1, [] wr_dis of SPI_BOOT_CRYPT_CNT
- WR_DIS.SECURE_BOOT_KEY_REVOKE0, EFUSE_BLK0, 5, 1, [] wr_dis of SECURE_BOOT_KEY_REVOKE0
- WR_DIS.SECURE_BOOT_KEY_REVOKE1, EFUSE_BLK0, 6, 1, [] wr_dis of SECURE_BOOT_KEY_REVOKE1
- WR_DIS.SECURE_BOOT_KEY_REVOKE2, EFUSE_BLK0, 7, 1, [] wr_dis of SECURE_BOOT_KEY_REVOKE2
- WR_DIS.KEY_PURPOSE_0, EFUSE_BLK0, 8, 1, [WR_DIS.KEY0_PURPOSE] wr_dis of KEY_PURPOSE_0
- WR_DIS.KEY_PURPOSE_1, EFUSE_BLK0, 9, 1, [WR_DIS.KEY1_PURPOSE] wr_dis of KEY_PURPOSE_1
- WR_DIS.KEY_PURPOSE_2, EFUSE_BLK0, 10, 1, [WR_DIS.KEY2_PURPOSE] wr_dis of KEY_PURPOSE_2
- WR_DIS.KEY_PURPOSE_3, EFUSE_BLK0, 11, 1, [WR_DIS.KEY3_PURPOSE] wr_dis of KEY_PURPOSE_3
- WR_DIS.KEY_PURPOSE_4, EFUSE_BLK0, 12, 1, [WR_DIS.KEY4_PURPOSE] wr_dis of KEY_PURPOSE_4
- WR_DIS.KEY_PURPOSE_5, EFUSE_BLK0, 13, 1, [WR_DIS.KEY5_PURPOSE] wr_dis of KEY_PURPOSE_5
- WR_DIS.SEC_DPA_LEVEL, EFUSE_BLK0, 14, 1, [] wr_dis of SEC_DPA_LEVEL
- WR_DIS.CRYPT_DPA_ENABLE, EFUSE_BLK0, 14, 1, [] wr_dis of CRYPT_DPA_ENABLE
- WR_DIS.SECURE_BOOT_EN, EFUSE_BLK0, 15, 1, [] wr_dis of SECURE_BOOT_EN
- WR_DIS.SECURE_BOOT_AGGRESSIVE_REVOKE, EFUSE_BLK0, 16, 1, [] wr_dis of SECURE_BOOT_AGGRESSIVE_REVOKE
- WR_DIS.ECDSA_FORCE_USE_HARDWARE_K, EFUSE_BLK0, 17, 1, [] wr_dis of ECDSA_FORCE_USE_HARDWARE_K
- WR_DIS.FLASH_TPUW, EFUSE_BLK0, 18, 1, [] wr_dis of FLASH_TPUW
- WR_DIS.DIS_DOWNLOAD_MODE, EFUSE_BLK0, 18, 1, [] wr_dis of DIS_DOWNLOAD_MODE
- WR_DIS.DIS_DIRECT_BOOT, EFUSE_BLK0, 18, 1, [] wr_dis of DIS_DIRECT_BOOT
- WR_DIS.DIS_USB_SERIAL_JTAG_ROM_PRINT, EFUSE_BLK0, 18, 1, [WR_DIS.DIS_USB_PRINT] wr_dis of DIS_USB_SERIAL_JTAG_ROM_PRINT
- WR_DIS.DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE, EFUSE_BLK0, 18, 1, [] wr_dis of DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE
- WR_DIS.ENABLE_SECURITY_DOWNLOAD, EFUSE_BLK0, 18, 1, [] wr_dis of ENABLE_SECURITY_DOWNLOAD
- WR_DIS.UART_PRINT_CONTROL, EFUSE_BLK0, 18, 1, [] wr_dis of UART_PRINT_CONTROL
- WR_DIS.FORCE_SEND_RESUME, EFUSE_BLK0, 18, 1, [] wr_dis of FORCE_SEND_RESUME
- WR_DIS.SECURE_VERSION, EFUSE_BLK0, 18, 1, [] wr_dis of SECURE_VERSION
- WR_DIS.SECURE_BOOT_DISABLE_FAST_WAKE, EFUSE_BLK0, 18, 1, [] wr_dis of SECURE_BOOT_DISABLE_FAST_WAKE
- WR_DIS.HYS_EN_PAD0, EFUSE_BLK0, 19, 1, [] wr_dis of HYS_EN_PAD0
- WR_DIS.HYS_EN_PAD1, EFUSE_BLK0, 19, 1, [] wr_dis of HYS_EN_PAD1
- WR_DIS.BLK1, EFUSE_BLK0, 20, 1, [] wr_dis of BLOCK1
- WR_DIS.MAC, EFUSE_BLK0, 20, 1, [WR_DIS.MAC_FACTORY] wr_dis of MAC
- WR_DIS.MAC_EXT, EFUSE_BLK0, 20, 1, [] wr_dis of MAC_EXT
- WR_DIS.RXIQ_VERSION, EFUSE_BLK0, 20, 1, [] wr_dis of RXIQ_VERSION
- WR_DIS.RXIQ_0, EFUSE_BLK0, 20, 1, [] wr_dis of RXIQ_0
- WR_DIS.RXIQ_1, EFUSE_BLK0, 20, 1, [] wr_dis of RXIQ_1
- WR_DIS.WAFER_VERSION_MINOR, EFUSE_BLK0, 20, 1, [] wr_dis of WAFER_VERSION_MINOR
- WR_DIS.WAFER_VERSION_MAJOR, EFUSE_BLK0, 20, 1, [] wr_dis of WAFER_VERSION_MAJOR
- WR_DIS.DISABLE_WAFER_VERSION_MAJOR, EFUSE_BLK0, 20, 1, [] wr_dis of DISABLE_WAFER_VERSION_MAJOR
- WR_DIS.FLASH_CAP, EFUSE_BLK0, 20, 1, [] wr_dis of FLASH_CAP
- WR_DIS.FLASH_TEMP, EFUSE_BLK0, 20, 1, [] wr_dis of FLASH_TEMP
- WR_DIS.FLASH_VENDOR, EFUSE_BLK0, 20, 1, [] wr_dis of FLASH_VENDOR
- WR_DIS.PKG_VERSION, EFUSE_BLK0, 20, 1, [] wr_dis of PKG_VERSION
- WR_DIS.SYS_DATA_PART1, EFUSE_BLK0, 21, 1, [] wr_dis of BLOCK2
- WR_DIS.OPTIONAL_UNIQUE_ID, EFUSE_BLK0, 21, 1, [] wr_dis of OPTIONAL_UNIQUE_ID
- WR_DIS.BLK_VERSION_MINOR, EFUSE_BLK0, 21, 1, [] wr_dis of BLK_VERSION_MINOR
- WR_DIS.BLK_VERSION_MAJOR, EFUSE_BLK0, 21, 1, [] wr_dis of BLK_VERSION_MAJOR
- WR_DIS.DISABLE_BLK_VERSION_MAJOR, EFUSE_BLK0, 21, 1, [] wr_dis of DISABLE_BLK_VERSION_MAJOR
- WR_DIS.BLOCK_USR_DATA, EFUSE_BLK0, 22, 1, [WR_DIS.USER_DATA] wr_dis of BLOCK_USR_DATA
- WR_DIS.CUSTOM_MAC, EFUSE_BLK0, 22, 1, [WR_DIS.MAC_CUSTOM WR_DIS.USER_DATA_MAC_CUSTOM] wr_dis of CUSTOM_MAC
- WR_DIS.BLOCK_KEY0, EFUSE_BLK0, 23, 1, [WR_DIS.KEY0] wr_dis of BLOCK_KEY0
- WR_DIS.BLOCK_KEY1, EFUSE_BLK0, 24, 1, [WR_DIS.KEY1] wr_dis of BLOCK_KEY1
- WR_DIS.BLOCK_KEY2, EFUSE_BLK0, 25, 1, [WR_DIS.KEY2] wr_dis of BLOCK_KEY2
- WR_DIS.BLOCK_KEY3, EFUSE_BLK0, 26, 1, [WR_DIS.KEY3] wr_dis of BLOCK_KEY3
- WR_DIS.BLOCK_KEY4, EFUSE_BLK0, 27, 1, [WR_DIS.KEY4] wr_dis of BLOCK_KEY4
- WR_DIS.BLOCK_KEY5, EFUSE_BLK0, 28, 1, [WR_DIS.KEY5] wr_dis of BLOCK_KEY5
- WR_DIS.BLOCK_SYS_DATA2, EFUSE_BLK0, 29, 1, [WR_DIS.SYS_DATA_PART2] wr_dis of BLOCK_SYS_DATA2
- WR_DIS.USB_EXCHG_PINS, EFUSE_BLK0, 30, 1, [] wr_dis of USB_EXCHG_PINS
- WR_DIS.VDD_SPI_AS_GPIO, EFUSE_BLK0, 30, 1, [] wr_dis of VDD_SPI_AS_GPIO
- WR_DIS.SOFT_DIS_JTAG, EFUSE_BLK0, 31, 1, [] wr_dis of SOFT_DIS_JTAG
- RD_DIS, EFUSE_BLK0, 32, 7, [] Disable reading from BlOCK4-10
- RD_DIS.BLOCK_KEY0, EFUSE_BLK0, 32, 1, [RD_DIS.KEY0] rd_dis of BLOCK_KEY0
- RD_DIS.BLOCK_KEY1, EFUSE_BLK0, 33, 1, [RD_DIS.KEY1] rd_dis of BLOCK_KEY1
- RD_DIS.BLOCK_KEY2, EFUSE_BLK0, 34, 1, [RD_DIS.KEY2] rd_dis of BLOCK_KEY2
- RD_DIS.BLOCK_KEY3, EFUSE_BLK0, 35, 1, [RD_DIS.KEY3] rd_dis of BLOCK_KEY3
- RD_DIS.BLOCK_KEY4, EFUSE_BLK0, 36, 1, [RD_DIS.KEY4] rd_dis of BLOCK_KEY4
- RD_DIS.BLOCK_KEY5, EFUSE_BLK0, 37, 1, [RD_DIS.KEY5] rd_dis of BLOCK_KEY5
- RD_DIS.BLOCK_SYS_DATA2, EFUSE_BLK0, 38, 1, [RD_DIS.SYS_DATA_PART2] rd_dis of BLOCK_SYS_DATA2
- DIS_ICACHE, EFUSE_BLK0, 40, 1, [] Represents whether icache is disabled or enabled. 1: disabled. 0: enabled
- DIS_USB_JTAG, EFUSE_BLK0, 41, 1, [] Represents whether the function of usb switch to jtag is disabled or enabled. 1: disabled. 0: enabled
- POWERGLITCH_EN, EFUSE_BLK0, 42, 1, [] Represents whether power glitch function is enabled. 1: enabled. 0: disabled
- DIS_FORCE_DOWNLOAD, EFUSE_BLK0, 44, 1, [] Represents whether the function that forces chip into download mode is disabled or enabled. 1: disabled. 0: enabled
- SPI_DOWNLOAD_MSPI_DIS, EFUSE_BLK0, 45, 1, [] Represents whether SPI0 controller during boot_mode_download is disabled or enabled. 1: disabled. 0: enabled
- DIS_TWAI, EFUSE_BLK0, 46, 1, [DIS_CAN] Represents whether TWAI function is disabled or enabled. 1: disabled. 0: enabled
- JTAG_SEL_ENABLE, EFUSE_BLK0, 47, 1, [] Set this bit to enable selection between usb_to_jtag and pad_to_jtag through strapping gpio25 when both EFUSE_DIS_PAD_JTAG and EFUSE_DIS_USB_JTAG are equal to 0
- SOFT_DIS_JTAG, EFUSE_BLK0, 48, 3, [] Represents whether JTAG is disabled in soft way. Odd number: disabled. Even number: enabled
- DIS_PAD_JTAG, EFUSE_BLK0, 51, 1, [] Represents whether JTAG is disabled in the hard way(permanently). 1: disabled. 0: enabled
- DIS_DOWNLOAD_MANUAL_ENCRYPT, EFUSE_BLK0, 52, 1, [] Represents whether flash encrypt function is disabled or enabled(except in SPI boot mode). 1: disabled. 0: enabled
- USB_EXCHG_PINS, EFUSE_BLK0, 57, 1, [] Represents whether the D+ and D- pins is exchanged. 1: exchanged. 0: not exchanged
- VDD_SPI_AS_GPIO, EFUSE_BLK0, 58, 1, [] Represents whether vdd spi pin is functioned as gpio. 1: functioned. 0: not functioned
- WDT_DELAY_SEL, EFUSE_BLK0, 80, 2, [] Represents whether RTC watchdog timeout threshold is selected at startup. 1: selected. 0: not selected
- SPI_BOOT_CRYPT_CNT, EFUSE_BLK0, 82, 3, [] Enables flash encryption when 1 or 3 bits are set and disables otherwise {0: "Disable"; 1: "Enable"; 3: "Disable"; 7: "Enable"}
- SECURE_BOOT_KEY_REVOKE0, EFUSE_BLK0, 85, 1, [] Revoke 1st secure boot key
- SECURE_BOOT_KEY_REVOKE1, EFUSE_BLK0, 86, 1, [] Revoke 2nd secure boot key
- SECURE_BOOT_KEY_REVOKE2, EFUSE_BLK0, 87, 1, [] Revoke 3rd secure boot key
- KEY_PURPOSE_0, EFUSE_BLK0, 88, 4, [KEY0_PURPOSE] Represents the purpose of Key0
- KEY_PURPOSE_1, EFUSE_BLK0, 92, 4, [KEY1_PURPOSE] Represents the purpose of Key1
- KEY_PURPOSE_2, EFUSE_BLK0, 96, 4, [KEY2_PURPOSE] Represents the purpose of Key2
- KEY_PURPOSE_3, EFUSE_BLK0, 100, 4, [KEY3_PURPOSE] Represents the purpose of Key3
- KEY_PURPOSE_4, EFUSE_BLK0, 104, 4, [KEY4_PURPOSE] Represents the purpose of Key4
- KEY_PURPOSE_5, EFUSE_BLK0, 108, 4, [KEY5_PURPOSE] Represents the purpose of Key5
- SEC_DPA_LEVEL, EFUSE_BLK0, 112, 2, [] Represents the spa secure level by configuring the clock random divide mode
- ECDSA_FORCE_USE_HARDWARE_K, EFUSE_BLK0, 114, 1, [] Represents whether hardware random number k is forced used in ESDCA. 1: force used. 0: not force used
- CRYPT_DPA_ENABLE, EFUSE_BLK0, 115, 1, [] Represents whether anti-dpa attack is enabled. 1:enabled. 0: disabled
- SECURE_BOOT_EN, EFUSE_BLK0, 116, 1, [] Represents whether secure boot is enabled or disabled. 1: enabled. 0: disabled
- SECURE_BOOT_AGGRESSIVE_REVOKE, EFUSE_BLK0, 117, 1, [] Represents whether revoking aggressive secure boot is enabled or disabled. 1: enabled. 0: disabled
- FLASH_TPUW, EFUSE_BLK0, 124, 4, [] Represents the flash waiting time after power-up; in unit of ms. When the value less than 15; the waiting time is the programmed value. Otherwise; the waiting time is 2 times the programmed value
- DIS_DOWNLOAD_MODE, EFUSE_BLK0, 128, 1, [] Represents whether Download mode is disabled or enabled. 1: disabled. 0: enabled
- DIS_DIRECT_BOOT, EFUSE_BLK0, 129, 1, [] Represents whether direct boot mode is disabled or enabled. 1: disabled. 0: enabled
- DIS_USB_SERIAL_JTAG_ROM_PRINT, EFUSE_BLK0, 130, 1, [DIS_USB_PRINT] Set this bit to disable USB-Serial-JTAG print during rom boot
- DIS_USB_SERIAL_JTAG_DOWNLOAD_MODE, EFUSE_BLK0, 132, 1, [] Represents whether the USB-Serial-JTAG download function is disabled or enabled. 1: disabled. 0: enabled
- ENABLE_SECURITY_DOWNLOAD, EFUSE_BLK0, 133, 1, [] Represents whether security download is enabled or disabled. 1: enabled. 0: disabled
- UART_PRINT_CONTROL, EFUSE_BLK0, 134, 2, [] Set the default UARTboot message output mode {0: "Enable"; 1: "Enable when GPIO8 is low at reset"; 2: "Enable when GPIO8 is high at reset"; 3: "Disable"}
- FORCE_SEND_RESUME, EFUSE_BLK0, 136, 1, [] Represents whether ROM code is forced to send a resume command during SPI boot. 1: forced. 0:not forced
- SECURE_VERSION, EFUSE_BLK0, 137, 16, [] Represents the version used by ESP-IDF anti-rollback feature
- SECURE_BOOT_DISABLE_FAST_WAKE, EFUSE_BLK0, 153, 1, [] Represents whether FAST VERIFY ON WAKE is disabled or enabled when Secure Boot is enabled. 1: disabled. 0: enabled
- HYS_EN_PAD0, EFUSE_BLK0, 154, 6, [] Set bits to enable hysteresis function of PAD0~5
- HYS_EN_PAD1, EFUSE_BLK0, 160, 22, [] Set bits to enable hysteresis function of PAD6~27
- MAC, EFUSE_BLK1, 40, 8, [MAC_FACTORY] MAC address
- , EFUSE_BLK1, 32, 8, [MAC_FACTORY] MAC address
- , EFUSE_BLK1, 24, 8, [MAC_FACTORY] MAC address
- , EFUSE_BLK1, 16, 8, [MAC_FACTORY] MAC address
- , EFUSE_BLK1, 8, 8, [MAC_FACTORY] MAC address
- , EFUSE_BLK1, 0, 8, [MAC_FACTORY] MAC address
- MAC_EXT, EFUSE_BLK1, 56, 8, [] Stores the extended bits of MAC address
- , EFUSE_BLK1, 48, 8, [] Stores the extended bits of MAC address
- RXIQ_VERSION, EFUSE_BLK1, 64, 3, [] RF Calibration data. RXIQ version
- RXIQ_0, EFUSE_BLK1, 67, 7, [] RF Calibration data. RXIQ data 0
- RXIQ_1, EFUSE_BLK1, 74, 7, [] RF Calibration data. RXIQ data 1
- WAFER_VERSION_MINOR, EFUSE_BLK1, 114, 3, []
- WAFER_VERSION_MAJOR, EFUSE_BLK1, 117, 2, []
- DISABLE_WAFER_VERSION_MAJOR, EFUSE_BLK1, 119, 1, [] Disables check of wafer version major
- FLASH_CAP, EFUSE_BLK1, 120, 3, []
- FLASH_TEMP, EFUSE_BLK1, 123, 2, []
- FLASH_VENDOR, EFUSE_BLK1, 125, 3, []
- PKG_VERSION, EFUSE_BLK1, 128, 3, [] Package version
- OPTIONAL_UNIQUE_ID, EFUSE_BLK2, 0, 128, [] Optional unique 128-bit ID
- BLK_VERSION_MINOR, EFUSE_BLK2, 130, 3, [] BLK_VERSION_MINOR of BLOCK2. 1: RF Calibration data in BLOCK1
- BLK_VERSION_MAJOR, EFUSE_BLK2, 133, 2, [] BLK_VERSION_MAJOR of BLOCK2
- DISABLE_BLK_VERSION_MAJOR, EFUSE_BLK2, 135, 1, [] Disables check of blk version major
- USER_DATA, EFUSE_BLK3, 0, 256, [BLOCK_USR_DATA] User data
- USER_DATA.MAC_CUSTOM, EFUSE_BLK3, 200, 48, [MAC_CUSTOM CUSTOM_MAC] Custom MAC
- KEY0, EFUSE_BLK4, 0, 256, [BLOCK_KEY0] Key0 or user data
- KEY1, EFUSE_BLK5, 0, 256, [BLOCK_KEY1] Key1 or user data
- KEY2, EFUSE_BLK6, 0, 256, [BLOCK_KEY2] Key2 or user data
- KEY3, EFUSE_BLK7, 0, 256, [BLOCK_KEY3] Key3 or user data
- KEY4, EFUSE_BLK8, 0, 256, [BLOCK_KEY4] Key4 or user data
- KEY5, EFUSE_BLK9, 0, 256, [BLOCK_KEY5] Key5 or user data
- SYS_DATA_PART2, EFUSE_BLK10, 0, 256, [BLOCK_SYS_DATA2] System data part 2 (reserved)
|
