| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240 |
- // Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
- //
- // Licensed under the Apache License, Version 2.0 (the "License");
- // you may not use this file except in compliance with the License.
- // You may obtain a copy of the License at
- // http://www.apache.org/licenses/LICENSE-2.0
- //
- // Unless required by applicable law or agreed to in writing, software
- // distributed under the License is distributed on an "AS IS" BASIS,
- // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- // See the License for the specific language governing permissions and
- // limitations under the License.
- #ifndef _SOC_LEDC_STRUCT_H_
- #define _SOC_LEDC_STRUCT_H_
- typedef volatile struct {
- struct {
- struct {
- union {
- struct {
- uint32_t timer_sel: 2; /*There are four high speed timers the two bits are used to select one of them for high speed channel. 2'b00: seletc hstimer0. 2'b01: select hstimer1. 2'b10: select hstimer2. 2'b11: select hstimer3.*/
- uint32_t sig_out_en: 1; /*This is the output enable control bit for high speed channel*/
- uint32_t idle_lv: 1; /*This bit is used to control the output value when high speed channel is off.*/
- uint32_t reserved4: 27;
- uint32_t clk_en: 1; /*This bit is clock gating control signal. when software configure LED_PWM internal registers it controls the register clock.*/
- };
- uint32_t val;
- } conf0;
- union {
- struct {
- uint32_t hpoint: 20; /*The output value changes to high when htimerx(x=[0 3]) selected by high speed channel has reached reg_hpoint_hsch0[19:0]*/
- uint32_t reserved20: 12;
- };
- uint32_t val;
- } hpoint;
- union {
- struct {
- uint32_t duty: 25; /*The register is used to control output duty. When hstimerx(x=[0 3]) chosen by high speed channel has reached reg_lpoint_hsch0 the output signal changes to low. reg_lpoint_hsch0=(reg_hpoint_hsch0[19:0]+reg_duty_hsch0[24:4]) (1) reg_lpoint_hsch0=(reg_hpoint_hsch0[19:0]+reg_duty_hsch0[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
- uint32_t reserved25: 7;
- };
- uint32_t val;
- } duty;
- union {
- struct {
- uint32_t duty_scale:10; /*This register controls the increase or decrease step scale for high speed channel.*/
- uint32_t duty_cycle:10; /*This register is used to increase or decrease the duty every reg_duty_cycle_hsch0 cycles for high speed channel.*/
- uint32_t duty_num: 10; /*This register is used to control the number of increased or decreased times for high speed channel.*/
- uint32_t duty_inc: 1; /*This register is used to increase the duty of output signal or decrease the duty of output signal for high speed channel.*/
- uint32_t duty_start: 1; /*When reg_duty_num_hsch0 reg_duty_cycle_hsch0 and reg_duty_scale_hsch0 has been configured. these register won't take effect until set reg_duty_start_hsch0. this bit is automatically cleared by hardware.*/
- };
- uint32_t val;
- } conf1;
- union {
- struct {
- uint32_t duty_read: 25; /*This register represents the current duty of the output signal for high speed channel.*/
- uint32_t reserved25: 7;
- };
- uint32_t val;
- } duty_rd;
- } channel[8];
- } channel_group[2]; /*two channel groups : 0: high-speed channels; 1: low-speed channels*/
- struct {
- struct {
- union {
- struct {
- uint32_t bit_num: 5; /*This register controls the range of the counter in high speed timer. the counter range is [0 2**reg_hstimer0_lim] the max bit width for counter is 20.*/
- uint32_t div_num: 18; /*This register is used to configure parameter for divider in high speed timer the least significant eight bits represent the decimal part.*/
- uint32_t pause: 1; /*This bit is used to pause the counter in high speed timer*/
- uint32_t rst: 1; /*This bit is used to reset high speed timer the counter will be 0 after reset.*/
- uint32_t tick_sel: 1; /*This bit is used to choose apb_clk or ref_tick for high speed timer. 1'b1:apb_clk 0:ref_tick*/
- uint32_t low_speed_update: 1; /*This bit is only useful for low speed timer channels, reserved for high speed timers*/
- uint32_t reserved26: 5;
- };
- uint32_t val;
- } conf;
- union {
- struct {
- uint32_t timer_cnt: 20; /*software can read this register to get the current counter value in high speed timer*/
- uint32_t reserved20: 12;
- };
- uint32_t val;
- } value;
- } timer[4];
- } timer_group[2]; /*two channel groups : 0: high-speed channels; 1: low-speed channels*/
- union {
- struct {
- uint32_t hstimer0_ovf: 1; /*The interrupt raw bit for high speed channel0 counter overflow.*/
- uint32_t hstimer1_ovf: 1; /*The interrupt raw bit for high speed channel1 counter overflow.*/
- uint32_t hstimer2_ovf: 1; /*The interrupt raw bit for high speed channel2 counter overflow.*/
- uint32_t hstimer3_ovf: 1; /*The interrupt raw bit for high speed channel3 counter overflow.*/
- uint32_t lstimer0_ovf: 1; /*The interrupt raw bit for low speed channel0 counter overflow.*/
- uint32_t lstimer1_ovf: 1; /*The interrupt raw bit for low speed channel1 counter overflow.*/
- uint32_t lstimer2_ovf: 1; /*The interrupt raw bit for low speed channel2 counter overflow.*/
- uint32_t lstimer3_ovf: 1; /*The interrupt raw bit for low speed channel3 counter overflow.*/
- uint32_t duty_chng_end_hsch0: 1; /*The interrupt raw bit for high speed channel 0 duty change done.*/
- uint32_t duty_chng_end_hsch1: 1; /*The interrupt raw bit for high speed channel 1 duty change done.*/
- uint32_t duty_chng_end_hsch2: 1; /*The interrupt raw bit for high speed channel 2 duty change done.*/
- uint32_t duty_chng_end_hsch3: 1; /*The interrupt raw bit for high speed channel 3 duty change done.*/
- uint32_t duty_chng_end_hsch4: 1; /*The interrupt raw bit for high speed channel 4 duty change done.*/
- uint32_t duty_chng_end_hsch5: 1; /*The interrupt raw bit for high speed channel 5 duty change done.*/
- uint32_t duty_chng_end_hsch6: 1; /*The interrupt raw bit for high speed channel 6 duty change done.*/
- uint32_t duty_chng_end_hsch7: 1; /*The interrupt raw bit for high speed channel 7 duty change done.*/
- uint32_t duty_chng_end_lsch0: 1; /*The interrupt raw bit for low speed channel 0 duty change done.*/
- uint32_t duty_chng_end_lsch1: 1; /*The interrupt raw bit for low speed channel 1 duty change done.*/
- uint32_t duty_chng_end_lsch2: 1; /*The interrupt raw bit for low speed channel 2 duty change done.*/
- uint32_t duty_chng_end_lsch3: 1; /*The interrupt raw bit for low speed channel 3 duty change done.*/
- uint32_t duty_chng_end_lsch4: 1; /*The interrupt raw bit for low speed channel 4 duty change done.*/
- uint32_t duty_chng_end_lsch5: 1; /*The interrupt raw bit for low speed channel 5 duty change done.*/
- uint32_t duty_chng_end_lsch6: 1; /*The interrupt raw bit for low speed channel 6 duty change done.*/
- uint32_t duty_chng_end_lsch7: 1; /*The interrupt raw bit for low speed channel 7 duty change done.*/
- uint32_t reserved24: 8;
- };
- uint32_t val;
- } int_raw;
- union {
- struct {
- uint32_t hstimer0_ovf: 1; /*The interrupt status bit for high speed channel0 counter overflow event.*/
- uint32_t hstimer1_ovf: 1; /*The interrupt status bit for high speed channel1 counter overflow event.*/
- uint32_t hstimer2_ovf: 1; /*The interrupt status bit for high speed channel2 counter overflow event.*/
- uint32_t hstimer3_ovf: 1; /*The interrupt status bit for high speed channel3 counter overflow event.*/
- uint32_t lstimer0_ovf: 1; /*The interrupt status bit for low speed channel0 counter overflow event.*/
- uint32_t lstimer1_ovf: 1; /*The interrupt status bit for low speed channel1 counter overflow event.*/
- uint32_t lstimer2_ovf: 1; /*The interrupt status bit for low speed channel2 counter overflow event.*/
- uint32_t lstimer3_ovf: 1; /*The interrupt status bit for low speed channel3 counter overflow event.*/
- uint32_t duty_chng_end_hsch1: 1; /*The interrupt status bit for high speed channel 1 duty change done event.*/
- uint32_t duty_chng_end_hsch2: 1; /*The interrupt status bit for high speed channel 2 duty change done event.*/
- uint32_t duty_chng_end_hsch3: 1; /*The interrupt status bit for high speed channel 3 duty change done event.*/
- uint32_t duty_chng_end_hsch4: 1; /*The interrupt status bit for high speed channel 4 duty change done event.*/
- uint32_t duty_chng_end_hsch5: 1; /*The interrupt status bit for high speed channel 5 duty change done event.*/
- uint32_t duty_chng_end_hsch6: 1; /*The interrupt status bit for high speed channel 6 duty change done event.*/
- uint32_t duty_chng_end_hsch7: 1; /*The interrupt status bit for high speed channel 7 duty change done event.*/
- uint32_t duty_chng_end_lsch0: 1; /*The interrupt status bit for low speed channel 0 duty change done event.*/
- uint32_t duty_chng_end_lsch1: 1; /*The interrupt status bit for low speed channel 1 duty change done event.*/
- uint32_t duty_chng_end_lsch2: 1; /*The interrupt status bit for low speed channel 2 duty change done event.*/
- uint32_t duty_chng_end_lsch3: 1; /*The interrupt status bit for low speed channel 3 duty change done event.*/
- uint32_t duty_chng_end_lsch4: 1; /*The interrupt status bit for low speed channel 4 duty change done event.*/
- uint32_t duty_chng_end_lsch5: 1; /*The interrupt status bit for low speed channel 5 duty change done event.*/
- uint32_t duty_chng_end_lsch6: 1; /*The interrupt status bit for low speed channel 6 duty change done event.*/
- uint32_t duty_chng_end_lsch7: 1; /*The interrupt status bit for low speed channel 7 duty change done event*/
- uint32_t reserved24: 8;
- };
- uint32_t val;
- } int_st;
- union {
- struct {
- uint32_t hstimer0_ovf: 1; /*The interrupt enable bit for high speed channel0 counter overflow interrupt.*/
- uint32_t hstimer1_ovf: 1; /*The interrupt enable bit for high speed channel1 counter overflow interrupt.*/
- uint32_t hstimer2_ovf: 1; /*The interrupt enable bit for high speed channel2 counter overflow interrupt.*/
- uint32_t hstimer3_ovf: 1; /*The interrupt enable bit for high speed channel3 counter overflow interrupt.*/
- uint32_t lstimer0_ovf: 1; /*The interrupt enable bit for low speed channel0 counter overflow interrupt.*/
- uint32_t lstimer1_ovf: 1; /*The interrupt enable bit for low speed channel1 counter overflow interrupt.*/
- uint32_t lstimer2_ovf: 1; /*The interrupt enable bit for low speed channel2 counter overflow interrupt.*/
- uint32_t lstimer3_ovf: 1; /*The interrupt enable bit for low speed channel3 counter overflow interrupt.*/
- uint32_t duty_chng_end_hsch0: 1; /*The interrupt enable bit for high speed channel 0 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch1: 1; /*The interrupt enable bit for high speed channel 1 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch2: 1; /*The interrupt enable bit for high speed channel 2 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch3: 1; /*The interrupt enable bit for high speed channel 3 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch4: 1; /*The interrupt enable bit for high speed channel 4 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch5: 1; /*The interrupt enable bit for high speed channel 5 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch6: 1; /*The interrupt enable bit for high speed channel 6 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch7: 1; /*The interrupt enable bit for high speed channel 7 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch0: 1; /*The interrupt enable bit for low speed channel 0 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch1: 1; /*The interrupt enable bit for low speed channel 1 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch2: 1; /*The interrupt enable bit for low speed channel 2 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch3: 1; /*The interrupt enable bit for low speed channel 3 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch4: 1; /*The interrupt enable bit for low speed channel 4 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch5: 1; /*The interrupt enable bit for low speed channel 5 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch6: 1; /*The interrupt enable bit for low speed channel 6 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch7: 1; /*The interrupt enable bit for low speed channel 7 duty change done interrupt.*/
- uint32_t reserved24: 8;
- };
- uint32_t val;
- } int_ena;
- union {
- struct {
- uint32_t hstimer0_ovf: 1; /*Set this bit to clear high speed channel0 counter overflow interrupt.*/
- uint32_t hstimer1_ovf: 1; /*Set this bit to clear high speed channel1 counter overflow interrupt.*/
- uint32_t hstimer2_ovf: 1; /*Set this bit to clear high speed channel2 counter overflow interrupt.*/
- uint32_t hstimer3_ovf: 1; /*Set this bit to clear high speed channel3 counter overflow interrupt.*/
- uint32_t lstimer0_ovf: 1; /*Set this bit to clear low speed channel0 counter overflow interrupt.*/
- uint32_t lstimer1_ovf: 1; /*Set this bit to clear low speed channel1 counter overflow interrupt.*/
- uint32_t lstimer2_ovf: 1; /*Set this bit to clear low speed channel2 counter overflow interrupt.*/
- uint32_t lstimer3_ovf: 1; /*Set this bit to clear low speed channel3 counter overflow interrupt.*/
- uint32_t duty_chng_end_hsch0: 1; /*Set this bit to clear high speed channel 0 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch1: 1; /*Set this bit to clear high speed channel 1 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch2: 1; /*Set this bit to clear high speed channel 2 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch3: 1; /*Set this bit to clear high speed channel 3 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch4: 1; /*Set this bit to clear high speed channel 4 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch5: 1; /*Set this bit to clear high speed channel 5 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch6: 1; /*Set this bit to clear high speed channel 6 duty change done interrupt.*/
- uint32_t duty_chng_end_hsch7: 1; /*Set this bit to clear high speed channel 7 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch0: 1; /*Set this bit to clear low speed channel 0 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch1: 1; /*Set this bit to clear low speed channel 1 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch2: 1; /*Set this bit to clear low speed channel 2 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch3: 1; /*Set this bit to clear low speed channel 3 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch4: 1; /*Set this bit to clear low speed channel 4 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch5: 1; /*Set this bit to clear low speed channel 5 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch6: 1; /*Set this bit to clear low speed channel 6 duty change done interrupt.*/
- uint32_t duty_chng_end_lsch7: 1; /*Set this bit to clear low speed channel 7 duty change done interrupt.*/
- uint32_t reserved24: 8;
- };
- uint32_t val;
- } int_clr;
- union {
- struct {
- uint32_t apb_clk_sel: 1; /*This bit is used to set the frequency of slow_clk. 1'b1:80mhz 1'b0:8mhz*/
- uint32_t reserved1: 31;
- };
- uint32_t val;
- } conf;
- uint32_t reserved_194;
- uint32_t reserved_198;
- uint32_t reserved_19c;
- uint32_t reserved_1a0;
- uint32_t reserved_1a4;
- uint32_t reserved_1a8;
- uint32_t reserved_1ac;
- uint32_t reserved_1b0;
- uint32_t reserved_1b4;
- uint32_t reserved_1b8;
- uint32_t reserved_1bc;
- uint32_t reserved_1c0;
- uint32_t reserved_1c4;
- uint32_t reserved_1c8;
- uint32_t reserved_1cc;
- uint32_t reserved_1d0;
- uint32_t reserved_1d4;
- uint32_t reserved_1d8;
- uint32_t reserved_1dc;
- uint32_t reserved_1e0;
- uint32_t reserved_1e4;
- uint32_t reserved_1e8;
- uint32_t reserved_1ec;
- uint32_t reserved_1f0;
- uint32_t reserved_1f4;
- uint32_t reserved_1f8;
- uint32_t date; /*This register represents the version .*/
- } ledc_dev_t;
- extern ledc_dev_t LEDC;
- #endif /* _SOC_LEDC_STRUCT_H_ */
|
