cpu_start.c 13 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413
  1. // Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
  2. //
  3. // Licensed under the Apache License, Version 2.0 (the "License");
  4. // you may not use this file except in compliance with the License.
  5. // You may obtain a copy of the License at
  6. //
  7. // http://www.apache.org/licenses/LICENSE-2.0
  8. //
  9. // Unless required by applicable law or agreed to in writing, software
  10. // distributed under the License is distributed on an "AS IS" BASIS,
  11. // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  12. // See the License for the specific language governing permissions and
  13. // limitations under the License.
  14. #include <stdint.h>
  15. #include <string.h>
  16. #include "sdkconfig.h"
  17. #include "esp_attr.h"
  18. #include "esp_err.h"
  19. #include "esp32s2/rom/ets_sys.h"
  20. #include "esp32s2/rom/uart.h"
  21. #include "esp32s2/rom/rtc.h"
  22. #include "esp32s2/rom/cache.h"
  23. #include "esp32s2/dport_access.h"
  24. #include "esp32s2/brownout.h"
  25. #include "esp32s2/cache_err_int.h"
  26. #include "esp32s2/spiram.h"
  27. #include "soc/cpu.h"
  28. #include "soc/rtc.h"
  29. #include "soc/dport_reg.h"
  30. #include "soc/io_mux_reg.h"
  31. #include "soc/rtc_cntl_reg.h"
  32. #include "soc/timer_group_reg.h"
  33. #include "soc/periph_defs.h"
  34. #include "soc/rtc_wdt.h"
  35. #include "driver/rtc_io.h"
  36. #include "freertos/FreeRTOS.h"
  37. #include "freertos/task.h"
  38. #include "freertos/semphr.h"
  39. #include "freertos/queue.h"
  40. #include "esp_heap_caps_init.h"
  41. #include "esp_system.h"
  42. #include "esp_spi_flash.h"
  43. #include "esp_flash_internal.h"
  44. #include "nvs_flash.h"
  45. #include "esp_event.h"
  46. #include "esp_spi_flash.h"
  47. #include "esp_ipc.h"
  48. #include "esp_private/crosscore_int.h"
  49. #include "esp_log.h"
  50. #include "esp_vfs_dev.h"
  51. #include "esp_newlib.h"
  52. #include "esp_int_wdt.h"
  53. #include "esp_task.h"
  54. #include "esp_task_wdt.h"
  55. #include "esp_phy_init.h"
  56. #include "esp_coexist_internal.h"
  57. #include "esp_debug_helpers.h"
  58. #include "esp_core_dump.h"
  59. #include "esp_app_trace.h"
  60. #include "esp_private/dbg_stubs.h"
  61. #include "esp_clk_internal.h"
  62. #include "esp_timer.h"
  63. #include "esp_pm.h"
  64. #include "esp_private/pm_impl.h"
  65. #include "trax.h"
  66. #include "esp_ota_ops.h"
  67. #include "esp_efuse.h"
  68. #include "bootloader_mem.h"
  69. #define STRINGIFY(s) STRINGIFY2(s)
  70. #define STRINGIFY2(s) #s
  71. void start_cpu0(void) __attribute__((weak, alias("start_cpu0_default"))) __attribute__((noreturn));
  72. void start_cpu0_default(void) IRAM_ATTR __attribute__((noreturn));
  73. static void do_global_ctors(void);
  74. static void main_task(void *args);
  75. extern void app_main(void);
  76. extern esp_err_t esp_pthread_init(void);
  77. extern int _bss_start;
  78. extern int _bss_end;
  79. extern int _rtc_bss_start;
  80. extern int _rtc_bss_end;
  81. extern int _init_start;
  82. extern void (*__init_array_start)(void);
  83. extern void (*__init_array_end)(void);
  84. extern volatile int port_xSchedulerRunning[2];
  85. static const char *TAG = "cpu_start";
  86. struct object {
  87. long placeholder[ 10 ];
  88. };
  89. void __register_frame_info (const void *begin, struct object *ob);
  90. extern char __eh_frame[];
  91. //If CONFIG_SPIRAM_IGNORE_NOTFOUND is set and external RAM is not found or errors out on testing, this is set to false.
  92. static bool s_spiram_okay = true;
  93. /*
  94. * We arrive here after the bootloader finished loading the program from flash. The hardware is mostly uninitialized,
  95. * and the app CPU is in reset. We do have a stack, so we can do the initialization in C.
  96. */
  97. void IRAM_ATTR call_start_cpu0(void)
  98. {
  99. RESET_REASON rst_reas;
  100. bootloader_init_mem();
  101. // Move exception vectors to IRAM
  102. cpu_hal_set_vecbase(&_init_start);
  103. rst_reas = rtc_get_reset_reason(0);
  104. // from panic handler we can be reset by RWDT or TG0WDT
  105. if (rst_reas == RTCWDT_SYS_RESET || rst_reas == TG0WDT_SYS_RESET) {
  106. #ifndef CONFIG_BOOTLOADER_WDT_ENABLE
  107. rtc_wdt_disable();
  108. #endif
  109. }
  110. //Clear BSS. Please do not attempt to do any complex stuff (like early logging) before this.
  111. memset(&_bss_start, 0, (&_bss_end - &_bss_start) * sizeof(_bss_start));
  112. /* Unless waking from deep sleep (implying RTC memory is intact), clear RTC bss */
  113. if (rst_reas != DEEPSLEEP_RESET) {
  114. memset(&_rtc_bss_start, 0, (&_rtc_bss_end - &_rtc_bss_start) * sizeof(_rtc_bss_start));
  115. }
  116. /* Configure the mode of instruction cache : cache size, cache associated ways, cache line size. */
  117. extern void esp_config_instruction_cache_mode(void);
  118. esp_config_instruction_cache_mode();
  119. /* If we need use SPIRAM, we should use data cache, or if we want to access rodata, we also should use data cache.
  120. Configure the mode of data : cache size, cache associated ways, cache line size.
  121. Enable data cache, so if we don't use SPIRAM, it just works. */
  122. #if CONFIG_SPIRAM_BOOT_INIT
  123. extern void esp_config_data_cache_mode(void);
  124. esp_config_data_cache_mode();
  125. Cache_Enable_DCache(0);
  126. #endif
  127. /* In SPIRAM code, we will reconfigure data cache, as well as instruction cache, so that we can:
  128. 1. make data buses works with SPIRAM
  129. 2. make instruction and rodata work with SPIRAM, still through instruction cache */
  130. #if CONFIG_SPIRAM_BOOT_INIT
  131. if (esp_spiram_init() != ESP_OK) {
  132. #if CONFIG_SPIRAM_IGNORE_NOTFOUND
  133. ESP_EARLY_LOGI(TAG, "Failed to init external RAM; continuing without it.");
  134. s_spiram_okay = false;
  135. #else
  136. ESP_EARLY_LOGE(TAG, "Failed to init external RAM!");
  137. abort();
  138. #endif
  139. }
  140. esp_spiram_init_cache();
  141. #endif
  142. ESP_EARLY_LOGI(TAG, "Pro cpu up.");
  143. if (LOG_LOCAL_LEVEL >= ESP_LOG_INFO) {
  144. const esp_app_desc_t *app_desc = esp_ota_get_app_description();
  145. ESP_EARLY_LOGI(TAG, "Application information:");
  146. #ifndef CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR
  147. ESP_EARLY_LOGI(TAG, "Project name: %s", app_desc->project_name);
  148. #endif
  149. #ifndef CONFIG_APP_EXCLUDE_PROJECT_VER_VAR
  150. ESP_EARLY_LOGI(TAG, "App version: %s", app_desc->version);
  151. #endif
  152. #ifdef CONFIG_BOOTLOADER_APP_SECURE_VERSION
  153. ESP_EARLY_LOGI(TAG, "Secure version: %d", app_desc->secure_version);
  154. #endif
  155. #ifdef CONFIG_APP_COMPILE_TIME_DATE
  156. ESP_EARLY_LOGI(TAG, "Compile time: %s %s", app_desc->date, app_desc->time);
  157. #endif
  158. char buf[17];
  159. esp_ota_get_app_elf_sha256(buf, sizeof(buf));
  160. ESP_EARLY_LOGI(TAG, "ELF file SHA256: %s...", buf);
  161. ESP_EARLY_LOGI(TAG, "ESP-IDF: %s", app_desc->idf_ver);
  162. }
  163. ESP_EARLY_LOGI(TAG, "Single core mode");
  164. #if CONFIG_SPIRAM_MEMTEST
  165. if (s_spiram_okay) {
  166. bool ext_ram_ok = esp_spiram_test();
  167. if (!ext_ram_ok) {
  168. ESP_EARLY_LOGE(TAG, "External RAM failed memory test!");
  169. abort();
  170. }
  171. }
  172. #endif
  173. #if CONFIG_SPIRAM_FETCH_INSTRUCTIONS
  174. extern void esp_spiram_enable_instruction_access(void);
  175. esp_spiram_enable_instruction_access();
  176. #endif
  177. #if CONFIG_SPIRAM_RODATA
  178. extern void esp_spiram_enable_rodata_access(void);
  179. esp_spiram_enable_rodata_access();
  180. #endif
  181. #if CONFIG_ESP32S2_INSTRUCTION_CACHE_WRAP || CONFIG_ESP32S2_DATA_CACHE_WRAP
  182. uint32_t icache_wrap_enable = 0, dcache_wrap_enable = 0;
  183. #if CONFIG_ESP32S2_INSTRUCTION_CACHE_WRAP
  184. icache_wrap_enable = 1;
  185. #endif
  186. #if CONFIG_ESP32S2_DATA_CACHE_WRAP
  187. dcache_wrap_enable = 1;
  188. #endif
  189. extern void esp_enable_cache_wrap(uint32_t icache_wrap_enable, uint32_t dcache_wrap_enable);
  190. esp_enable_cache_wrap(icache_wrap_enable, dcache_wrap_enable);
  191. #endif
  192. /* Initialize heap allocator */
  193. heap_caps_init();
  194. ESP_EARLY_LOGI(TAG, "Pro cpu start user code");
  195. start_cpu0();
  196. }
  197. static void intr_matrix_clear(void)
  198. {
  199. //Clear all the interrupt matrix register
  200. for (int i = ETS_WIFI_MAC_INTR_SOURCE; i < ETS_MAX_INTR_SOURCE; i++) {
  201. intr_matrix_set(0, i, ETS_INVALID_INUM);
  202. }
  203. }
  204. void start_cpu0_default(void)
  205. {
  206. esp_err_t err;
  207. esp_setup_syscall_table();
  208. if (s_spiram_okay) {
  209. #if CONFIG_SPIRAM_BOOT_INIT && (CONFIG_SPIRAM_USE_CAPS_ALLOC || CONFIG_SPIRAM_USE_MALLOC)
  210. esp_err_t r = esp_spiram_add_to_heapalloc();
  211. if (r != ESP_OK) {
  212. ESP_EARLY_LOGE(TAG, "External RAM could not be added to heap!");
  213. abort();
  214. }
  215. #if CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL
  216. r = esp_spiram_reserve_dma_pool(CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL);
  217. if (r != ESP_OK) {
  218. ESP_EARLY_LOGE(TAG, "Could not reserve internal/DMA pool!");
  219. abort();
  220. }
  221. #endif
  222. #if CONFIG_SPIRAM_USE_MALLOC
  223. heap_caps_malloc_extmem_enable(CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL);
  224. #endif
  225. #endif
  226. }
  227. //Enable trace memory and immediately start trace.
  228. #if CONFIG_ESP32S2_TRAX
  229. trax_enable(TRAX_ENA_PRO);
  230. trax_start_trace(TRAX_DOWNCOUNT_WORDS);
  231. #endif
  232. esp_clk_init();
  233. esp_perip_clk_init();
  234. intr_matrix_clear();
  235. #ifndef CONFIG_ESP_CONSOLE_UART_NONE
  236. #ifdef CONFIG_PM_ENABLE
  237. const int uart_clk_freq = REF_CLK_FREQ;
  238. /* When DFS is enabled, use REFTICK as UART clock source */
  239. CLEAR_PERI_REG_MASK(UART_CONF0_REG(CONFIG_ESP_CONSOLE_UART_NUM), UART_TICK_REF_ALWAYS_ON);
  240. #else
  241. const int uart_clk_freq = APB_CLK_FREQ;
  242. #endif // CONFIG_PM_DFS_ENABLE
  243. uart_div_modify(CONFIG_ESP_CONSOLE_UART_NUM, (uart_clk_freq << 4) / CONFIG_ESP_CONSOLE_UART_BAUDRATE);
  244. #endif // CONFIG_ESP_CONSOLE_UART_NONE
  245. #if CONFIG_ESP32S2_BROWNOUT_DET
  246. esp_brownout_init();
  247. #endif
  248. #if CONFIG_ESP32S2_DISABLE_BASIC_ROM_CONSOLE
  249. esp_efuse_disable_basic_rom_console();
  250. #endif
  251. rtc_gpio_force_hold_dis_all();
  252. #ifdef CONFIG_VFS_SUPPORT_IO
  253. esp_vfs_dev_uart_register();
  254. #endif // CONFIG_VFS_SUPPORT_IO
  255. #if defined(CONFIG_VFS_SUPPORT_IO) && !defined(CONFIG_ESP_CONSOLE_UART_NONE)
  256. esp_reent_init(_GLOBAL_REENT);
  257. const char *default_uart_dev = "/dev/uart/" STRINGIFY(CONFIG_ESP_CONSOLE_UART_NUM);
  258. _GLOBAL_REENT->_stdin = fopen(default_uart_dev, "r");
  259. _GLOBAL_REENT->_stdout = fopen(default_uart_dev, "w");
  260. _GLOBAL_REENT->_stderr = fopen(default_uart_dev, "w");
  261. #else // defined(CONFIG_VFS_SUPPORT_IO) && !defined(CONFIG_ESP_CONSOLE_UART_NONE)
  262. _REENT_SMALL_CHECK_INIT(_GLOBAL_REENT);
  263. #endif // defined(CONFIG_VFS_SUPPORT_IO) && !defined(CONFIG_ESP_CONSOLE_UART_NONE)
  264. esp_timer_init();
  265. esp_set_time_from_rtc();
  266. #if CONFIG_APPTRACE_ENABLE
  267. err = esp_apptrace_init();
  268. assert(err == ESP_OK && "Failed to init apptrace module on PRO CPU!");
  269. #endif
  270. #if CONFIG_SYSVIEW_ENABLE
  271. SEGGER_SYSVIEW_Conf();
  272. #endif
  273. #if CONFIG_ESP32S2_DEBUG_STUBS_ENABLE
  274. esp_dbg_stubs_init();
  275. #endif
  276. err = esp_pthread_init();
  277. assert(err == ESP_OK && "Failed to init pthread module!");
  278. do_global_ctors();
  279. #if CONFIG_ESP_INT_WDT
  280. esp_int_wdt_init();
  281. //Initialize the interrupt watch dog
  282. esp_int_wdt_cpu_init();
  283. #endif
  284. esp_cache_err_int_init();
  285. esp_crosscore_int_init();
  286. spi_flash_init();
  287. /* init default OS-aware flash access critical section */
  288. spi_flash_guard_set(&g_flash_guard_default_ops);
  289. esp_flash_app_init();
  290. esp_err_t flash_ret = esp_flash_init_default_chip();
  291. assert(flash_ret == ESP_OK);
  292. #ifdef CONFIG_PM_ENABLE
  293. esp_pm_impl_init();
  294. #ifdef CONFIG_PM_DFS_INIT_AUTO
  295. int xtal_freq = (int) rtc_clk_xtal_freq_get();
  296. esp_pm_config_esp32s2_t cfg = {
  297. .max_freq_mhz = CONFIG_ESP32S2_DEFAULT_CPU_FREQ_MHZ,
  298. .min_freq_mhz = xtal_freq,
  299. };
  300. esp_pm_configure(&cfg);
  301. #endif //CONFIG_PM_DFS_INIT_AUTO
  302. #endif //CONFIG_PM_ENABLE
  303. #if CONFIG_ESP32_ENABLE_COREDUMP
  304. esp_core_dump_init();
  305. #endif
  306. portBASE_TYPE res = xTaskCreatePinnedToCore(&main_task, "main",
  307. ESP_TASK_MAIN_STACK, NULL,
  308. ESP_TASK_MAIN_PRIO, NULL, 0);
  309. assert(res == pdTRUE);
  310. ESP_LOGI(TAG, "Starting scheduler on PRO CPU.");
  311. vTaskStartScheduler();
  312. abort(); /* Only get to here if not enough free heap to start scheduler */
  313. }
  314. #ifdef CONFIG_COMPILER_CXX_EXCEPTIONS
  315. size_t __cxx_eh_arena_size_get(void)
  316. {
  317. return CONFIG_COMPILER_CXX_EXCEPTIONS_EMG_POOL_SIZE;
  318. }
  319. #endif
  320. static void do_global_ctors(void)
  321. {
  322. #ifdef CONFIG_COMPILER_CXX_EXCEPTIONS
  323. static struct object ob;
  324. __register_frame_info( __eh_frame, &ob );
  325. #endif
  326. void (**p)(void);
  327. for (p = &__init_array_end - 1; p >= &__init_array_start; --p) {
  328. (*p)();
  329. }
  330. }
  331. static void main_task(void *args)
  332. {
  333. //Enable allocation in region where the startup stacks were located.
  334. heap_caps_enable_nonos_stack_heaps();
  335. //Initialize task wdt if configured to do so
  336. #ifdef CONFIG_ESP_TASK_WDT_PANIC
  337. ESP_ERROR_CHECK(esp_task_wdt_init(CONFIG_ESP_TASK_WDT_TIMEOUT_S, true));
  338. #elif CONFIG_ESP_TASK_WDT
  339. ESP_ERROR_CHECK(esp_task_wdt_init(CONFIG_ESP_TASK_WDT_TIMEOUT_S, false));
  340. #endif
  341. //Add IDLE 0 to task wdt
  342. #ifdef CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0
  343. TaskHandle_t idle_0 = xTaskGetIdleTaskHandleForCPU(0);
  344. if (idle_0 != NULL) {
  345. ESP_ERROR_CHECK(esp_task_wdt_add(idle_0));
  346. }
  347. #endif
  348. // Now that the application is about to start, disable boot watchdog
  349. #ifndef CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE
  350. rtc_wdt_disable();
  351. #endif
  352. #ifdef CONFIG_BOOTLOADER_EFUSE_SECURE_VERSION_EMULATE
  353. const esp_partition_t *efuse_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_EFUSE_EM, NULL);
  354. if (efuse_partition) {
  355. esp_efuse_init(efuse_partition->address, efuse_partition->size);
  356. }
  357. #endif
  358. app_main();
  359. vTaskDelete(NULL);
  360. }