esp-idf/components/bootloader_support/include/esp_secure_boot.h

/*
 * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */
#pragma once

#include <stdbool.h>
#include <esp_err.h>
#include "soc/efuse_periph.h"
#include "soc/soc_caps.h"
#include "esp_image_format.h"
#include "esp_rom_efuse.h"
#include "sdkconfig.h"
#include "esp_rom_crc.h"
#include "hal/efuse_ll.h"

#ifdef CONFIG_SECURE_BOOT_V1_ENABLED
#if !defined(CONFIG_SECURE_SIGNED_ON_BOOT) || !defined(CONFIG_SECURE_SIGNED_ON_UPDATE) || !defined(CONFIG_SECURE_SIGNED_APPS)
#error "internal sdkconfig error, secure boot should always enable all signature options"
#endif
#endif

#ifdef __cplusplus
extern "C" {
#endif

/* Support functions for secure boot features.

   Can be compiled as part of app or bootloader code.
*/

#define ESP_SECURE_BOOT_DIGEST_LEN 32

#if CONFIG_IDF_TARGET_ESP32C2
#define ESP_SECURE_BOOT_KEY_DIGEST_LEN 16
#else
#define ESP_SECURE_BOOT_KEY_DIGEST_LEN 32
#endif

#ifdef CONFIG_EFUSE_VIRTUAL_KEEP_IN_FLASH
#include "esp_efuse.h"
#include "esp_efuse_table.h"
#endif

/** @brief Is secure boot currently enabled in hardware?
 *
 * This means that the ROM bootloader code will only boot
 * a verified secure bootloader from now on.
 *
 * @return true if secure boot is enabled.
 */
static inline bool esp_secure_boot_enabled(void)
{
#if CONFIG_IDF_TARGET_ESP32
    #ifdef CONFIG_SECURE_BOOT_V1_ENABLED
        #ifndef CONFIG_EFUSE_VIRTUAL_KEEP_IN_FLASH
            return efuse_ll_get_secure_boot_v1_en();
        #else
            return esp_efuse_read_field_bit(ESP_EFUSE_ABS_DONE_0);
        #endif
    #elif CONFIG_SECURE_BOOT_V2_ENABLED
        #ifndef CONFIG_EFUSE_VIRTUAL_KEEP_IN_FLASH
            return efuse_ll_get_secure_boot_v2_en();
        #else
            return esp_efuse_read_field_bit(ESP_EFUSE_ABS_DONE_1);
        #endif
    #endif
#else
    #ifndef CONFIG_EFUSE_VIRTUAL_KEEP_IN_FLASH
        return efuse_ll_get_secure_boot_v2_en();
    #else
        return esp_efuse_read_field_bit(ESP_EFUSE_SECURE_BOOT_EN);
    #endif
#endif
    return false; /* Secure Boot not enabled in menuconfig */
}

/** @brief Generate secure digest from bootloader image
 *
 * @important This function is intended to be called from bootloader code only.
 *
 * This function is only used in the context of the Secure Boot V1 scheme.
 *
 * If secure boot is not yet enabled for bootloader, this will:
 *     1) generate the secure boot key and burn it on EFUSE
 *        (without enabling R/W protection)
 *     2) generate the digest from bootloader and save it
 *        to flash address 0x0
 *
 * If first boot gets interrupted after calling this function
 * but before esp_secure_boot_permanently_enable() is called, then
 * the key burned on EFUSE will not be regenerated, unless manually
 * done using espefuse.py tool
 *
 * @return ESP_OK if secure boot digest is generated
 * successfully or found to be already present
 */
esp_err_t esp_secure_boot_generate_digest(void);

/** @brief Enable secure boot V1 if it is not already enabled.
 *
 * @important If this function succeeds, secure boot V1 is permanently
 * enabled on the chip via efuse.
 *
 * @important This function is intended to be called from bootloader code only.
 *
 * @important In case of Secure Boot V1, this will enable r/w protection
 * of secure boot key on EFUSE, therefore it is to be ensured that
 * esp_secure_boot_generate_digest() is called before this .If secure boot is not
 * yet enabled for bootloader, this will
 *     1) enable R/W protection of secure boot key on EFUSE
 *     2) enable secure boot by blowing the EFUSE_RD_ABS_DONE_0 efuse.
 *
 * This function does not verify secure boot of the bootloader (the
 * ROM bootloader does this.)
 *
 * Will fail if efuses have been part-burned in a way that indicates
 * secure boot should not or could not be correctly enabled.
 *
 * @return ESP_ERR_INVALID_STATE if efuse state doesn't allow
 * secure boot to be enabled cleanly. ESP_OK if secure boot
 * is enabled on this chip from now on.
 */
esp_err_t esp_secure_boot_permanently_enable(void);

/** @brief Enables secure boot V2 if it is not already enabled.
 *
 * @important If this function succeeds, secure boot V2 is permanently
 * enabled on the chip via efuse.
 *
 * @important This function is intended to be called from bootloader code only.
 *
 * @important In case of Secure Boot V2, this will enable write protection
 * of secure boot key on EFUSE in BLK2. .If secure boot is not
 * yet enabled for bootloader, this will
 *     1) enable W protection of secure boot key on EFUSE
 *     2) enable secure boot by blowing the EFUSE_RD_ABS_DONE_1 efuse.
 *
 * This function does not verify secure boot of the bootloader (the
 * ROM bootloader does this.)
 *
 * @param image_data Image metadata of the application to be loaded.
 *
 * Will fail if efuses have been part-burned in a way that indicates
 * secure boot should not or could not be correctly enabled.
 *
 * @return ESP_ERR_INVALID_STATE if efuse state doesn't allow
 * secure boot to be enabled cleanly. ESP_OK if secure boot
 * is enabled on this chip from now on.
 */
esp_err_t esp_secure_boot_v2_permanently_enable(const esp_image_metadata_t *image_data);

/** @brief Verify the secure boot signature appended to some binary data in flash.
 *
 * For ECDSA Scheme (Secure Boot V1) - deterministic ECDSA w/ SHA256 image
 * For RSA Scheme (Secure Boot V2) - RSA-PSS Verification of the SHA-256 image
 *
 * Public key is compiled into the calling program in the ECDSA Scheme.
 * See the apt docs/security/secure-boot-v1.rst or docs/security/secure-boot-v2.rst for details.
 *
 * @param src_addr Starting offset of the data in flash.
 * @param length Length of data in bytes. Signature is appended -after- length bytes.
 *
 * If flash encryption is enabled, the image will be transparently decrypted while being verified.
 *
 * @note This function doesn't have any fault injection resistance so should not be called
 * during a secure boot itself (but can be called when verifying an update, etc.)
 *
 * @return ESP_OK if signature is valid, ESP_ERR_INVALID_STATE if
 * signature fails, ESP_FAIL for other failures (ie can't read flash).
 */
esp_err_t esp_secure_boot_verify_signature(uint32_t src_addr, uint32_t length);

/** @brief Secure boot verification block, on-flash data format. */
typedef struct {
    uint32_t version;
    uint8_t signature[64];
} esp_secure_boot_sig_block_t;

/** @brief Verify the ECDSA secure boot signature block for Secure Boot V1.
 *
 *  Calculates Deterministic ECDSA w/ SHA256 based on the SHA256 hash of the image. ECDSA signature
 *  verification must be enabled in project configuration to use this function.
 *
 * Similar to esp_secure_boot_verify_signature(), but can be used when the digest is precalculated.
 * @param sig_block Pointer to ECDSA signature block data
 * @param image_digest Pointer to 32 byte buffer holding SHA-256 hash.
 * @param verified_digest Pointer to 32 byte buffer that will receive verified digest if verification completes. (Used during bootloader implementation only, result is invalid otherwise.)
 *
 */
esp_err_t esp_secure_boot_verify_ecdsa_signature_block(const esp_secure_boot_sig_block_t *sig_block, const uint8_t *image_digest, uint8_t *verified_digest);

#if !CONFIG_IDF_TARGET_ESP32 || CONFIG_ESP32_REV_MIN_FULL >= 300
/**
 * @brief Structure to hold public key digests calculated from the signature blocks of a single image.
 *
 * Each image can have one or more signature blocks (up to SECURE_BOOT_NUM_BLOCKS). Each signature block includes a public key.
 */
typedef struct {
    uint8_t key_digests[SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS][ESP_SECURE_BOOT_DIGEST_LEN];    /* SHA of the public key components in the signature block */
    unsigned num_digests;                                       /* Number of valid digests, starting at index 0 */
} esp_image_sig_public_key_digests_t;

#endif // !CONFIG_IDF_TARGET_ESP32 || CONFIG_ESP32_REV_MIN_FULL >= 300

/** @brief Legacy ECDSA verification function
 *
 * @note Deprecated, call either esp_secure_boot_verify_ecdsa_signature_block() or esp_secure_boot_verify_rsa_signature_block() instead.
 *
 * @param sig_block Pointer to ECDSA signature block data
 * @param image_digest Pointer to 32 byte buffer holding SHA-256 hash.
 */
esp_err_t esp_secure_boot_verify_signature_block(const esp_secure_boot_sig_block_t *sig_block, const uint8_t *image_digest)
    __attribute__((deprecated("use esp_secure_boot_verify_ecdsa_signature_block instead")));


#define FLASH_OFFS_SECURE_BOOT_IV_DIGEST 0

/** @brief Secure boot IV+digest header */
typedef struct {
    uint8_t iv[128];
    uint8_t digest[64];
} esp_secure_boot_iv_digest_t;

/** @brief Check the secure boot V2 during startup
 *
 * @note This function is called automatically during app startup,
 * it doesn't need to be called from the app.
 *
 * Verifies the secure boot config during startup:
 *
 * - Correct any insecure secure boot settings
 */
void esp_secure_boot_init_checks(void);

#if !BOOTLOADER_BUILD && (CONFIG_SECURE_SIGNED_APPS_RSA_SCHEME || CONFIG_SECURE_SIGNED_APPS_ECDSA_V2_SCHEME)

/** @brief Scan the current running app for signature blocks
 *
 * @note This function doesn't verify that the signatures are valid or the
 * corresponding public keys are trusted, it only reads the number of signature
 * blocks present and optionally calculates the digests of the public keys
 * provided in the signature blocks.
 *
 * @param digest_public_keys If true, the key_digests fields in the
 * public_key_digests structure will be filled with the digests of the public
 * key provided in each signature block. Note that if Secure Boot V2 is enabled,
 * each public key will only be trusted if the same digest is also present in
 * eFuse (but this is not checked by this function).
 *
 * @param public_key_digests[out] Structure is initialized with the num_digests
 * field set to the number of signatures found. If digest_public_keys is set,
 * the public key digests are also calculated and stored here.
 *
 * @return
 *  - ESP_OK - At least one signature was found
 *  - ESP_ERR_NOT_FOUND - No signatures were found, num_digests value will be zero
 *  - ESP_FAIL - An error occured trying to read the signature blocks from flash
 */
esp_err_t esp_secure_boot_get_signature_blocks_for_running_app(bool digest_public_keys, esp_image_sig_public_key_digests_t *public_key_digests);

#endif // !BOOTLOADER_BUILD && (CONFIG_SECURE_SIGNED_APPS_RSA_SCHEME || CONFIG_SECURE_SIGNED_APPS_ECDSA_V2_SCHEME)

/** @brief Set all secure eFuse features related to secure_boot
 *
 * @return
 *  - ESP_OK - Successfully
 */
esp_err_t esp_secure_boot_enable_secure_features(void);

/** @brief Returns the verification status for all physical security features of secure boot in release mode
 *
 * If the device has secure boot feature configured in the release mode,
 * then it is highly recommended to call this API in the application startup code.
 * This API verifies the sanity of the eFuse configuration against
 * the release (production) mode of the secure boot feature.
 *
 * @return
 *  - True - all eFuses are configured correctly
 *  - False - not all eFuses are configured correctly.
 */
bool esp_secure_boot_cfg_verify_release_mode(void);


#if !defined(BOOTLOADER_BUILD) && SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY && CONFIG_SECURE_BOOT_V2_ENABLED

/** @brief Returns the verification status of the image pointed by the part_pos argument against the public key digest present at index `efuse_digest_index`
 *
 * @param index[in]         Index of public key digest present in efuse against which the image is to be verified
 * @param part_pos[in]      It is a pointer to the bootloader/app partition.
 *
 * @return
 *  - ESP_OK - if the image can be verified by the key at efuse_index.
 *  - ESP_FAIL - if the image cannot be verified by the key at efuse_index.
 *  - ESP_ERR_INVALID_ARG: Error in the passed arguments.
 */
esp_err_t esp_secure_boot_verify_with_efuse_digest_index(int efuse_digest_index, esp_partition_pos_t *part_pos);

#endif // !defined(BOOTLOADER_BUILD) && SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY && CONFIG_SECURE_BOOT_V2_ENABLED

#ifdef __cplusplus
}
#endif