esp-idf/components/ulp/test_apps/ulp_fsm/main/test_ulp.c

/*
 * SPDX-FileCopyrightText: 2010-2022 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <stdio.h>
#include <string.h>
#include <freertos/FreeRTOS.h>
#include <freertos/task.h>
#include <freertos/semphr.h>

#include <unity.h>
#include "esp_attr.h"
#include "esp_err.h"
#include "esp_log.h"
#include "esp_sleep.h"
#include "ulp.h"
#include "soc/soc.h"
#include "soc/rtc.h"
#include "soc/rtc_cntl_reg.h"
#include "soc/sens_reg.h"
#include "soc/rtc_io_reg.h"
#include "hal/misc.h"
#include "driver/rtc_io.h"

#include "sdkconfig.h"
#include "esp_rom_sys.h"

#include "ulp_test_app.h"

extern const uint8_t ulp_test_app_bin_start[] asm("_binary_ulp_test_app_bin_start");
extern const uint8_t ulp_test_app_bin_end[]   asm("_binary_ulp_test_app_bin_end");

#define HEX_DUMP_DEBUG 0

static void hexdump(const uint32_t* src, size_t count) {
#if HEX_DUMP_DEBUG
    for (size_t i = 0; i < count; ++i) {
        printf("%08x ", *src);
        ++src;
        if ((i + 1) % 4 == 0) {
            printf("\n");
        }
    }
#else
    (void)src;
    (void)count;
#endif
}

TEST_CASE("ULP FSM addition test", "[ulp]")
{
    hal_memset(RTC_SLOW_MEM, 0, CONFIG_ULP_COPROC_RESERVE_MEM);

    /* ULP co-processor program to add data in 2 memory locations using ULP macros */
    const ulp_insn_t program[] = {
        I_MOVI(R3, 16),     // r3 = 16
        I_LD(R0, R3, 0),    // r0 = mem[r3 + 0]
        I_LD(R1, R3, 1),    // r1 = mem[r3 + 1]
        I_ADDR(R2, R0, R1), // r2 = r0 + r1
        I_ST(R2, R3, 2),    // mem[r3 + 2] = r2
        I_HALT()            // halt
    };

    /* Load the memory regions used by the ULP co-processor */
    RTC_SLOW_MEM[16] = 10;
    RTC_SLOW_MEM[17] = 11;

    /* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
    size_t size = sizeof(program)/sizeof(ulp_insn_t);
    TEST_ASSERT_EQUAL(ESP_OK, ulp_process_macros_and_load(0, program, &size));
    TEST_ASSERT_EQUAL(ESP_OK, ulp_run(0));

    /* Wait for the ULP co-processor to finish up */
    esp_rom_delay_us(1000);
    hexdump(RTC_SLOW_MEM, 20);

    /* Verify the test results */
    TEST_ASSERT_EQUAL(10 + 11, RTC_SLOW_MEM[18] & 0xffff);
}

TEST_CASE("ULP FSM subtraction and branch test", "[ulp]")
{
    assert(CONFIG_ULP_COPROC_RESERVE_MEM >= 260 && "this test needs ULP_COPROC_RESERVE_MEM option set in menuconfig");

    /* Clear the RTC_SLOW_MEM region for the ULP co-processor binary to be loaded */
    hal_memset(RTC_SLOW_MEM, 0, CONFIG_ULP_COPROC_RESERVE_MEM);

    /* ULP co-processor program to perform subtractions and branch to a label */
    const ulp_insn_t program[] = {
        I_MOVI(R0, 34),     // r0 = 34
        M_LABEL(1),         // define a label with label number as 1
        I_MOVI(R1, 32),     // r1 = 32
        I_LD(R1, R1, 0),    // r1 = mem[32 + 0]
        I_MOVI(R2, 33),     // r2 = 33
        I_LD(R2, R2, 0),    // r2 = mem[33 + 0]
        I_SUBR(R3, R1, R2), // r3 = r1 - r2
        I_ST(R3, R0, 0),    // mem[r0 + 0] = r3
        I_ADDI(R0, R0, 1),  // r0 = r0 + 1
        M_BL(1, 64),        // branch to label 1 if r0 < 64
        I_HALT(),           // halt
    };

    /* Load the memory regions used by the ULP co-processor */
    RTC_SLOW_MEM[32] = 42;
    RTC_SLOW_MEM[33] = 18;

    /* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
    size_t size = sizeof(program)/sizeof(ulp_insn_t);
    TEST_ASSERT_EQUAL(ESP_OK, ulp_process_macros_and_load(0, program, &size));
    TEST_ASSERT_EQUAL(ESP_OK, ulp_run(0));
    printf("\n\n");

    /* Wait for the ULP co-processor to finish up */
    esp_rom_delay_us(1000);
    hexdump(RTC_SLOW_MEM, 50);

    /* Verify the test results */
    for (int i = 34; i < 64; ++i) {
        TEST_ASSERT_EQUAL(42 - 18, RTC_SLOW_MEM[i] & 0xffff);
    }
    TEST_ASSERT_EQUAL(0, RTC_SLOW_MEM[64]);
}

TEST_CASE("ULP FSM JUMPS instruction test", "[ulp]")
{
    /*
     * Load the ULP binary.
     *
     * This ULP program is written in assembly. Please refer associated .S file.
     */
    esp_err_t err = ulp_load_binary(0, ulp_test_app_bin_start,
            (ulp_test_app_bin_end - ulp_test_app_bin_start) / sizeof(uint32_t));
    TEST_ESP_OK(err);

    /* Clear ULP FSM raw interrupt */
    REG_CLR_BIT(RTC_CNTL_INT_RAW_REG, RTC_CNTL_ULP_CP_INT_RAW);

    /* Run the ULP coprocessor */
    TEST_ESP_OK(ulp_run(&ulp_test_jumps - RTC_SLOW_MEM));

    /* Wait for the ULP co-processor to finish up */
    esp_rom_delay_us(1000);

    /* Verify that ULP FSM issued an interrupt to wake up the main CPU */
    TEST_ASSERT_NOT_EQUAL(0, REG_GET_BIT(RTC_CNTL_INT_RAW_REG, RTC_CNTL_ULP_CP_INT_RAW));

    /* Verify the test results */
    TEST_ASSERT_EQUAL(0, ulp_jumps_fail & UINT16_MAX);
    TEST_ASSERT_EQUAL(1, ulp_jumps_pass & UINT16_MAX);
}

TEST_CASE("ULP FSM light-sleep wakeup test", "[ulp]")
{
    assert(CONFIG_ULP_COPROC_RESERVE_MEM >= 260 && "this test needs ULP_COPROC_RESERVE_MEM option set in menuconfig");

    /* Clear the RTC_SLOW_MEM region for the ULP co-processor binary to be loaded */
    hal_memset(RTC_SLOW_MEM, 0, CONFIG_ULP_COPROC_RESERVE_MEM);

    /* ULP co-processor program to perform some activities and wakeup the main CPU from deep-sleep */
    const ulp_insn_t program[] = {
        I_MOVI(R1, 1024),   // r1 = 1024
        M_LABEL(1),         // define label 1
        I_DELAY(64000),     // add a delay (NOP for 64000 cycles)
        I_SUBI(R1, R1, 1),  // r1 = r1 - 1
        M_BXZ(3),           // branch to label 3 if ALU value is 0. (r1 = 0)
        I_RSHI(R3, R1, 5),  // r3 = r1 / 32
        I_ST(R1, R3, 16),   // mem[r3 + 16] = r1
        M_BX(1),            // loop to label 1
        M_LABEL(3),         // define label 3
        I_MOVI(R2, 42),     // r2 = 42
        I_MOVI(R3, 15),     // r3 = 15
        I_ST(R2, R3, 0),    // mem[r3 + 0] = r2
        I_WAKE(),           // wake the SoC from deep-sleep
        I_END(),            // stop ULP timer
        I_HALT()            // halt
    };

    /* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
    size_t size = sizeof(program)/sizeof(ulp_insn_t);
    TEST_ASSERT_EQUAL(ESP_OK, ulp_process_macros_and_load(0, program, &size));
    TEST_ASSERT_EQUAL(ESP_OK, ulp_run(0));

    /* Setup wakeup triggers */
    TEST_ASSERT(esp_sleep_enable_ulp_wakeup() == ESP_OK);

    /* Also wake-up by timer to help debug issues, timer will only timeout if ULP for some reason failed to wake-up cpu  */
    TEST_ASSERT(esp_sleep_enable_timer_wakeup(10 * 1000000) == ESP_OK);

    /* Enter Light Sleep */
    TEST_ASSERT(esp_light_sleep_start() == ESP_OK);

    /* Wait for wakeup from ULP FSM Coprocessor */
    printf("cause %d\r\n", esp_sleep_get_wakeup_cause());
    TEST_ASSERT(esp_sleep_get_wakeup_cause() == ESP_SLEEP_WAKEUP_ULP);
}

static void ulp_fsm_deepsleep_wakeup_test(void)
{
    assert(CONFIG_ULP_COPROC_RESERVE_MEM >= 260 && "this test needs ULP_COPROC_RESERVE_MEM option set in menuconfig");

    /* Clearout the RTC_SLOW_MEM region for the ULP co-processor binary to be loaded */
    hal_memset(RTC_SLOW_MEM, 0, CONFIG_ULP_COPROC_RESERVE_MEM);

    /* ULP co-processor program to perform some activities and wakeup the main CPU from deep-sleep */
    const ulp_insn_t program[] = {
        I_MOVI(R1, 1024),   // r1 = 1024
        M_LABEL(1),         // define label 1
        I_DELAY(64000),     // add a delay (NOP for 64000 cycles)
        I_SUBI(R1, R1, 1),  // r1 = r1 - 1
        M_BXZ(3),           // branch to label 3 if ALU value is 0. (r1 = 0)
        I_RSHI(R3, R1, 5),  // r3 = r1 / 32
        I_ST(R1, R3, 16),   // mem[r3 + 16] = r1
        M_BX(1),            // loop to label 1
        M_LABEL(3),         // define label 3
        I_MOVI(R2, 42),     // r2 = 42
        I_MOVI(R3, 15),     // r3 = 15
        I_ST(R2, R3, 0),    // mem[r3 + 0] = r2
        I_WAKE(),           // wake the SoC from deep-sleep
        I_END(),            // stop ULP timer
        I_HALT()            // halt
    };

    /* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
    size_t size = sizeof(program)/sizeof(ulp_insn_t);
    TEST_ASSERT_EQUAL(ESP_OK, ulp_process_macros_and_load(0, program, &size));
    TEST_ASSERT_EQUAL(ESP_OK, ulp_run(0));

    /* Setup wakeup triggers */
    TEST_ASSERT(esp_sleep_enable_ulp_wakeup() == ESP_OK);

    /* Enter Deep Sleep */
    esp_deep_sleep_start();
    UNITY_TEST_FAIL(__LINE__, "Should not get here!");
}

static void check_sleep_reset(void)
{
    TEST_ASSERT_EQUAL(ESP_RST_DEEPSLEEP, esp_reset_reason());
    esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();
    TEST_ASSERT_EQUAL(ESP_SLEEP_WAKEUP_ULP, cause);
}

TEST_CASE_MULTIPLE_STAGES("ULP FSM deep-sleep wakeup test", "[deepsleep][reset=DEEPSLEEP_RESET]",
                          ulp_fsm_deepsleep_wakeup_test,
                          check_sleep_reset)


TEST_CASE("ULP FSM can write and read peripheral registers", "[ulp]")
{
    assert(CONFIG_ULP_COPROC_RESERVE_MEM >= 260 && "this test needs ULP_COPROC_RESERVE_MEM option set in menuconfig");

    /* Clear ULP timer */
    CLEAR_PERI_REG_MASK(RTC_CNTL_STATE0_REG, RTC_CNTL_ULP_CP_SLP_TIMER_EN);

    /* Clear the RTC_SLOW_MEM region for the ULP co-processor binary to be loaded */
    hal_memset(RTC_SLOW_MEM, 0, CONFIG_ULP_COPROC_RESERVE_MEM);
    uint32_t rtc_store0 = REG_READ(RTC_CNTL_STORE0_REG);
    uint32_t rtc_store1 = REG_READ(RTC_CNTL_STORE1_REG);

    /* ULP co-processor program to read from and write to peripheral registers */
    const ulp_insn_t program[] = {
            I_MOVI(R1, 64),                                 // r1 = 64
            I_RD_REG(RTC_CNTL_STORE1_REG, 0, 15),           // r0 = REG_READ(RTC_CNTL_STORE1_REG[15:0])
            I_ST(R0, R1, 0),                                // mem[r1 + 0] = r0
            I_RD_REG(RTC_CNTL_STORE1_REG, 4, 11),           // r0 = REG_READ(RTC_CNTL_STORE1_REG[11:4])
            I_ST(R0, R1, 1),                                // mem[r1 + 1] = r0
            I_RD_REG(RTC_CNTL_STORE1_REG, 16, 31),          // r0 = REG_READ(RTC_CNTL_STORE1_REG[31:16])
            I_ST(R0, R1, 2),                                // mem[r1 + 2] = r0
            I_RD_REG(RTC_CNTL_STORE1_REG, 20, 27),          // r0 = REG_READ(RTC_CNTL_STORE1_REG[27:20])
            I_ST(R0, R1, 3),                                // mem[r1 + 3] = r0
            I_WR_REG(RTC_CNTL_STORE0_REG, 0, 7, 0x89),      // REG_WRITE(RTC_CNTL_STORE0_REG[7:0], 0x89)
            I_WR_REG(RTC_CNTL_STORE0_REG, 8, 15, 0xab),     // REG_WRITE(RTC_CNTL_STORE0_REG[15:8], 0xab)
            I_WR_REG(RTC_CNTL_STORE0_REG, 16, 23, 0xcd),    // REG_WRITE(RTC_CNTL_STORE0_REG[23:16], 0xcd)
            I_WR_REG(RTC_CNTL_STORE0_REG, 24, 31, 0xef),    // REG_WRITE(RTC_CNTL_STORE0_REG[31:24], 0xef)
            I_LD(R0, R1, 4),                                // r0 = mem[r1 + 4]
            I_ADDI(R0, R0, 1),                              // r0 = r0 + 1
            I_ST(R0, R1, 4),                                // mem[r1 + 4] = r0
            I_END(),                                        // stop ULP timer
            I_HALT()                                        // halt
    };

    /* Set data in the peripheral register to be read by the ULP co-processor */
    REG_WRITE(RTC_CNTL_STORE1_REG, 0x89abcdef);

    /* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
    size_t size = sizeof(program)/sizeof(ulp_insn_t);
    TEST_ESP_OK(ulp_process_macros_and_load(0, program, &size));
    TEST_ESP_OK(ulp_run(0));

    /* Wait for the ULP co-processor to finish up */
    vTaskDelay(100/portTICK_PERIOD_MS);

    /* Verify the test results */
    TEST_ASSERT_EQUAL_HEX32(0xefcdab89, REG_READ(RTC_CNTL_STORE0_REG));
    TEST_ASSERT_EQUAL_HEX16(0xcdef, RTC_SLOW_MEM[64] & 0xffff);
    TEST_ASSERT_EQUAL_HEX16(0xde, RTC_SLOW_MEM[65] & 0xffff);
    TEST_ASSERT_EQUAL_HEX16(0x89ab, RTC_SLOW_MEM[66] & 0xffff);
    TEST_ASSERT_EQUAL_HEX16(0x9a, RTC_SLOW_MEM[67] & 0xffff);
    TEST_ASSERT_EQUAL_HEX16(1, RTC_SLOW_MEM[68] & 0xffff);

    /* Restore initial calibration values */
    REG_WRITE(RTC_CNTL_STORE0_REG, rtc_store0);
    REG_WRITE(RTC_CNTL_STORE1_REG, rtc_store1);
}

TEST_CASE("ULP FSM I_WR_REG instruction test", "[ulp]")
{
    assert(CONFIG_ULP_COPROC_RESERVE_MEM >= 260 && "this test needs ULP_COPROC_RESERVE_MEM option set in menuconfig");

    /* Clear the RTC_SLOW_MEM region for the ULP co-processor binary to be loaded */
    hal_memset(RTC_SLOW_MEM, 0, CONFIG_ULP_COPROC_RESERVE_MEM);

    /* Define the test set */
    typedef struct {
        int low;
        int width;
    } wr_reg_test_item_t;

    const wr_reg_test_item_t test_items[] = {
        {0, 1}, {0, 2}, {0, 3}, {0, 4}, {0, 5}, {0, 6}, {0, 7}, {0, 8},
        {3, 1}, {3, 2}, {3, 3}, {3, 4}, {3, 5}, {3, 6}, {3, 7}, {3, 8},
        {15, 1}, {15, 2}, {15, 3}, {15, 4}, {15, 5}, {15, 6}, {15, 7}, {15, 8},
        {16, 1}, {16, 2}, {16, 3}, {16, 4}, {16, 5}, {16, 6}, {16, 7}, {16, 8},
        {18, 1}, {18, 2}, {18, 3}, {18, 4}, {18, 5}, {18, 6}, {18, 7}, {18, 8},
        {24, 1}, {24, 2}, {24, 3}, {24, 4}, {24, 5}, {24, 6}, {24, 7}, {24, 8},
    };

    const size_t test_items_count =
            sizeof(test_items)/sizeof(test_items[0]);
    for (size_t i = 0; i < test_items_count; ++i) {
        const uint32_t mask = (uint32_t) (((1ULL << test_items[i].width) - 1) << test_items[i].low);
        const uint32_t not_mask = ~mask;
        printf("#%2d: low: %2d width: %2d mask: %08" PRIx32 " expected: %08" PRIx32 " ", i,
                test_items[i].low, test_items[i].width,
                mask, not_mask);

        /* Set all bits in RTC_CNTL_STORE0_REG and reset all bits in RTC_CNTL_STORE1_REG */
        uint32_t rtc_store0 = REG_READ(RTC_CNTL_STORE0_REG);
        uint32_t rtc_store1 = REG_READ(RTC_CNTL_STORE1_REG);
        REG_WRITE(RTC_CNTL_STORE0_REG, 0xffffffff);
        REG_WRITE(RTC_CNTL_STORE1_REG, 0x00000000);

        /* ULP co-processor program to write to peripheral registers */
        const ulp_insn_t program[] = {
            I_WR_REG(RTC_CNTL_STORE0_REG,
                    test_items[i].low,
                    test_items[i].low + test_items[i].width - 1,
                    0),
            I_WR_REG(RTC_CNTL_STORE1_REG,
                    test_items[i].low,
                    test_items[i].low + test_items[i].width - 1,
                    0xff & ((1 << test_items[i].width) - 1)),
            I_END(),
            I_HALT()
        };

        /* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
        size_t size = sizeof(program)/sizeof(ulp_insn_t);
        TEST_ESP_OK(ulp_process_macros_and_load(0, program, &size));
        TEST_ESP_OK(ulp_run(0));

        /* Wait for the ULP co-processor to finish up */
        vTaskDelay(10/portTICK_PERIOD_MS);

        /* Verify the test results */
        uint32_t clear = REG_READ(RTC_CNTL_STORE0_REG);
        uint32_t set = REG_READ(RTC_CNTL_STORE1_REG);
        printf("clear: %08" PRIx32 " set: %08" PRIx32 "\n", clear, set);

        /* Restore initial calibration values */
        REG_WRITE(RTC_CNTL_STORE0_REG, rtc_store0);
        REG_WRITE(RTC_CNTL_STORE1_REG, rtc_store1);

        TEST_ASSERT_EQUAL_HEX32(not_mask, clear);
        TEST_ASSERT_EQUAL_HEX32(mask, set);
    }
}




TEST_CASE("ULP FSM timer setting", "[ulp]")
{
    assert(CONFIG_ULP_COPROC_RESERVE_MEM >= 32 && "this test needs ULP_COPROC_RESERVE_MEM option set in menuconfig");

    /* Clear the RTC_SLOW_MEM region for the ULP co-processor binary to be loaded */
    hal_memset(RTC_SLOW_MEM, 0, CONFIG_ULP_COPROC_RESERVE_MEM);

    /*
     * Run a simple ULP program which increments the counter, for one second.
     * Program calls I_HALT each time and gets restarted by the timer.
     * Compare the expected number of times the program runs with the actual.
     */
    const int offset = 6;
    const ulp_insn_t program[] = {
        I_MOVI(R1, offset),     // r1 <- offset
        I_LD(R2, R1, 0),        // load counter
        I_ADDI(R2, R2, 1),      // counter += 1
        I_ST(R2, R1, 0),        // save counter
        I_HALT(),
    };

    /* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
    size_t size = sizeof(program)/sizeof(ulp_insn_t);
    TEST_ESP_OK(ulp_process_macros_and_load(0, program, &size));
    assert(offset >= size && "data offset needs to be greater or equal to program size");
    TEST_ESP_OK(ulp_run(0));

    /* Disable the ULP program timer — we will enable it later */
    ulp_timer_stop();

    /* Define the test data */
    const uint32_t cycles_to_test[] = { 10000,      // 10 ms
                                        20000,      // 20 ms
                                        50000,      // 50 ms
                                        100000,     // 100 ms
                                        200000,     // 200 ms
                                        500000,     // 500 ms
                                        1000000 };  // 1 sec
    const size_t tests_count = sizeof(cycles_to_test) / sizeof(cycles_to_test[0]);

    for (size_t i = 0; i < tests_count; ++i) {
        // zero out the counter
        RTC_SLOW_MEM[offset] = 0;
        // set the ulp timer period
        ulp_set_wakeup_period(0, cycles_to_test[i]);
        // enable the timer and wait for a second
        ulp_timer_resume();
        vTaskDelay(1000 / portTICK_PERIOD_MS);
        // stop the timer and get the counter value
        ulp_timer_stop();
        uint32_t counter = RTC_SLOW_MEM[offset] & 0xffff;
        // calculate the expected counter value and allow a tolerance of 15%
        uint32_t expected_counter = 1000000 / cycles_to_test[i];
        uint32_t tolerance = (expected_counter * 15 / 100);
        tolerance = tolerance ? tolerance : 1;  // Keep a tolerance of at least 1 count
        printf("expected: %" PRIu32 "\t tolerance: +/- %" PRIu32 "\t actual: %" PRIu32 "\n", expected_counter, tolerance, counter);
        // Should be within 15%
        TEST_ASSERT_INT_WITHIN(tolerance, expected_counter, counter);
    }
}

static void ulp_isr(void *arg)
{
    BaseType_t yield = 0;
    SemaphoreHandle_t sem = (SemaphoreHandle_t)arg;
    xSemaphoreGiveFromISR(sem, &yield);
    if (yield) {
        portYIELD_FROM_ISR();
    }
}

TEST_CASE("ULP FSM interrupt signal can be handled via ISRs on the main core", "[ulp]")
{
    assert(CONFIG_ULP_COPROC_RESERVE_MEM >= 260 && "this test needs ULP_COPROC_RESERVE_MEM option set in menuconfig");

    /* Clear the RTC_SLOW_MEM region for the ULP co-processor binary to be loaded */
    hal_memset(RTC_SLOW_MEM, 0, CONFIG_ULP_COPROC_RESERVE_MEM);

    /* ULP co-processor program to send a wakeup to the main CPU */
    const ulp_insn_t program[] = {
        I_WAKE(),           // send wakeup signal to main CPU
        I_END(),            // stop ULP timer
        I_HALT()            // halt
    };

    /* Create test semaphore */
    SemaphoreHandle_t ulp_isr_sem = xSemaphoreCreateBinary();
    TEST_ASSERT_NOT_NULL(ulp_isr_sem);

    /* Register ULP wakeup signal ISR */
    TEST_ASSERT_EQUAL(ESP_OK, ulp_isr_register(ulp_isr, (void *)ulp_isr_sem));

    /* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
    size_t size = sizeof(program)/sizeof(ulp_insn_t);
    TEST_ASSERT_EQUAL(ESP_OK, ulp_process_macros_and_load(0, program, &size));
    TEST_ASSERT_EQUAL(ESP_OK, ulp_run(0));

    /* Wait from ISR to be called */
    TEST_ASSERT_EQUAL(pdTRUE, xSemaphoreTake(ulp_isr_sem, portMAX_DELAY));

    /* Deregister the ISR */
    TEST_ASSERT_EQUAL(ESP_OK, ulp_isr_deregister(ulp_isr, (void *)ulp_isr_sem ));

    /* Delete test semaphore */
    vSemaphoreDelete(ulp_isr_sem);
}