Halaman utama Jelajahi Bantuan
Masuk
RT-Thread-packages
/
esp-idf
cermin dari https://github-proxy.rt-thread.io/RT-Thread-packages/esp-idf.git
2
0
Fork 0
Berkas Masalah 0 Wiki
Cabang: master
Ranting Tag
esp-idf
/
examples
/
bluetooth
/
bluedroid
/
ble_50
/
multi-adv
Chen Yudong 45bc939462 ci: update bluetooth examples build rules 2 tahun lalu
..
main 0df585dc35 feat(bt/bluedroid): Add new version of API for Bluedroid host stack initialization 2 tahun lalu
tutorial 0df585dc35 feat(bt/bluedroid): Add new version of API for Bluedroid host stack initialization 2 tahun lalu
CMakeLists.txt facab8c5a7 tools: Increase the minimal supported CMake version to 3.16 3 tahun lalu
README.md 45bc939462 ci: update bluetooth examples build rules 2 tahun lalu
sdkconfig.defaults 45aaeda1e3 modify bt sdkconfig to support bluedroid examples for esp32c6 3 tahun lalu
sdkconfig.defaults.esp32c2 42743a7189 Update_sdkdefaultconfig_BLE_only_flag ESP32C2 3 tahun lalu
sdkconfig.defaults.esp32c3 42743a7189 Update_sdkdefaultconfig_BLE_only_flag ESP32C2 3 tahun lalu
sdkconfig.defaults.esp32s3 42743a7189 Update_sdkdefaultconfig_BLE_only_flag ESP32C2 3 tahun lalu

README.md

Supported Targets ESP32-C2 ESP32-C3 ESP32-C6 ESP32-H2 ESP32-S3

#ESP-IDF Multi Adv Example

This example support legacy as well as extended advertisement for all phy.

Please, check this tutorial for more information about this example.

How to Use Example

Before project configuration and build, be sure to set the correct chip target using:

idf.py set-target <chip_name>

Hardware Required

  • A development board with ESP32-C3 SoC,ESP32-S3/ESP32-H2/ESP32-C2 SoC and BLE5.0 supported chips (e.g., ESP32-C3-DevKitC, etc.)
  • A USB cable for Power supply and programming

See Development Boards for more information about it.

Build and Flash

Run idf.py -p PORT flash monitor to build, flash and monitor the project.

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

I (361) BTDM_INIT: BT controller compile version [3e61eea]
I (371) coexist: coexist rom version 8459080
I (371) phy_init: phy_version 500,985899c,Apr 19 2021,16:05:08
I (491) system_api: Base MAC address is not set
I (491) system_api: read default base MAC address from EFUSE
I (491) BTDM_INIT: Bluetooth MAC: 7c:df:a1:40:01:c5

I (711) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_PARAMS_COMPLETE_EVT, status 0
I (711) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_RAND_ADDR_COMPLETE_EVT, status 0
I (711) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_DATA_SET_COMPLETE_EVT, status 0
I (721) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_PARAMS_COMPLETE_EVT, status 0
I (731) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_RAND_ADDR_COMPLETE_EVT, status 0
I (741) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_SCAN_RSP_DATA_SET_COMPLETE_EVT, status 0
I (741) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_PARAMS_COMPLETE_EVT, status 0
I (751) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_RAND_ADDR_COMPLETE_EVT, status 0
I (761) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_DATA_SET_COMPLETE_EVT, status 0
I (771) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_SCAN_RSP_DATA_SET_COMPLETE_EVT, status 0
I (781) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_PARAMS_COMPLETE_EVT, status 0
I (781) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_SET_RAND_ADDR_COMPLETE_EVT, status 0
I (791) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_SCAN_RSP_DATA_SET_COMPLETE_EVT, status 0
I (801) MULTI_ADV_DEMO: ESP_GAP_BLE_EXT_ADV_START_COMPLETE_EVT, status 0

Troubleshooting

For any technical queries, please open an issue on GitHub. We will get back to you soon.