Release v1.2.2

Inc/Legacy/stm32_hal_legacy.h

@@ -7,13 +7,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2021 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -38,6 +37,14 @@ extern "C" {
 #define AES_CLEARFLAG_CCF               CRYP_CLEARFLAG_CCF
 #define AES_CLEARFLAG_RDERR             CRYP_CLEARFLAG_RDERR
 #define AES_CLEARFLAG_WRERR             CRYP_CLEARFLAG_WRERR
+#if defined(STM32U5)
+#define CRYP_DATATYPE_32B               CRYP_NO_SWAP
+#define CRYP_DATATYPE_16B               CRYP_HALFWORD_SWAP
+#define CRYP_DATATYPE_8B                CRYP_BYTE_SWAP
+#define CRYP_DATATYPE_1B                CRYP_BIT_SWAP
+#define CRYP_CCF_CLEAR                  CRYP_CLEAR_CCF
+#define CRYP_ERR_CLEAR                  CRYP_CLEAR_RWEIF
+#endif /* STM32U5 */
 /**
   * @}
   */
@@ -206,6 +213,20 @@ extern "C" {
   * @{
   */
 #define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig
+#if defined(STM32U5)
+#define  MPU_DEVICE_nGnRnE          MPU_DEVICE_NGNRNE
+#define  MPU_DEVICE_nGnRE           MPU_DEVICE_NGNRE
+#define  MPU_DEVICE_nGRE            MPU_DEVICE_NGRE
+#endif /* STM32U5 */
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Aliases CRC API aliases
+  * @{
+  */
+#define HAL_CRC_Input_Data_Reverse   HAL_CRCEx_Input_Data_Reverse    /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility  */
+#define HAL_CRC_Output_Data_Reverse  HAL_CRCEx_Output_Data_Reverse   /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */
 /**
   * @}
   */
@@ -235,11 +256,18 @@ extern "C" {
 #define DAC_WAVEGENERATION_NOISE                        DAC_WAVE_NOISE
 #define DAC_WAVEGENERATION_TRIANGLE                     DAC_WAVE_TRIANGLE
 
-#if defined(STM32G4) || defined(STM32H7)
+#if defined(STM32G4) || defined(STM32H7) || defined (STM32U5)
 #define DAC_CHIPCONNECT_DISABLE       DAC_CHIPCONNECT_EXTERNAL
 #define DAC_CHIPCONNECT_ENABLE        DAC_CHIPCONNECT_INTERNAL
 #endif
 
+#if defined(STM32U5)
+#define DAC_TRIGGER_STOP_LPTIM1_OUT  DAC_TRIGGER_STOP_LPTIM1_CH1
+#define DAC_TRIGGER_STOP_LPTIM3_OUT  DAC_TRIGGER_STOP_LPTIM3_CH1
+#define DAC_TRIGGER_LPTIM1_OUT       DAC_TRIGGER_LPTIM1_CH1
+#define DAC_TRIGGER_LPTIM3_OUT       DAC_TRIGGER_LPTIM3_CH1
+#endif
+
 #if defined(STM32L1) || defined(STM32L4) || defined(STM32G0) || defined(STM32L5) || defined(STM32H7) || defined(STM32F4) || defined(STM32G4)
 #define HAL_DAC_MSP_INIT_CB_ID       HAL_DAC_MSPINIT_CB_ID
 #define HAL_DAC_MSP_DEINIT_CB_ID     HAL_DAC_MSPDEINIT_CB_ID
@@ -382,7 +410,6 @@ extern "C" {
 #define DAC_TRIGGER_LP2_OUT                        DAC_TRIGGER_LPTIM2_OUT
 
 #endif /* STM32H7 */
-
 /**
   * @}
   */
@@ -470,15 +497,24 @@ extern "C" {
 #define OB_BOOT_ENTRY_FORCED_FLASH    OB_BOOT_LOCK_ENABLE
 #endif
 #if defined(STM32H7)
-#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1
-#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1
-#define FLASH_FLAG_STRBER_BANK1R  FLASH_FLAG_STRBERR_BANK1
-#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2
-#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2
-#define FLASH_FLAG_STRBER_BANK2R  FLASH_FLAG_STRBERR_BANK2
-#define FLASH_FLAG_WDW            FLASH_FLAG_WBNE
-#define OB_WRP_SECTOR_All         OB_WRP_SECTOR_ALL
+#define FLASH_FLAG_SNECCE_BANK1RR     FLASH_FLAG_SNECCERR_BANK1
+#define FLASH_FLAG_DBECCE_BANK1RR     FLASH_FLAG_DBECCERR_BANK1
+#define FLASH_FLAG_STRBER_BANK1R      FLASH_FLAG_STRBERR_BANK1
+#define FLASH_FLAG_SNECCE_BANK2RR     FLASH_FLAG_SNECCERR_BANK2
+#define FLASH_FLAG_DBECCE_BANK2RR     FLASH_FLAG_DBECCERR_BANK2
+#define FLASH_FLAG_STRBER_BANK2R      FLASH_FLAG_STRBERR_BANK2
+#define FLASH_FLAG_WDW                FLASH_FLAG_WBNE
+#define OB_WRP_SECTOR_All             OB_WRP_SECTOR_ALL
 #endif /* STM32H7 */
+#if defined(STM32U5)
+#define OB_USER_nRST_STOP             OB_USER_NRST_STOP
+#define OB_USER_nRST_STDBY            OB_USER_NRST_STDBY
+#define OB_USER_nRST_SHDW             OB_USER_NRST_SHDW
+#define OB_USER_nSWBOOT0              OB_USER_NSWBOOT0
+#define OB_USER_nBOOT0                OB_USER_NBOOT0
+#define OB_nBOOT0_RESET               OB_NBOOT0_RESET
+#define OB_nBOOT0_SET                 OB_NBOOT0_SET
+#endif /* STM32U5 */
 
 /**
   * @}
@@ -521,6 +557,7 @@ extern "C" {
 #define HAL_SYSCFG_EnableIOAnalogSwitchVDD        HAL_SYSCFG_EnableIOSwitchVDD
 #define HAL_SYSCFG_DisableIOAnalogSwitchVDD       HAL_SYSCFG_DisableIOSwitchVDD
 #endif /* STM32G4 */
+
 /**
   * @}
   */
@@ -595,12 +632,12 @@ extern "C" {
 #define GPIO_AF1_LPTIM                            GPIO_AF1_LPTIM1
 #define GPIO_AF2_LPTIM                            GPIO_AF2_LPTIM1
 
-#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB)
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB) || defined(STM32U5)
 #define  GPIO_SPEED_LOW                           GPIO_SPEED_FREQ_LOW
 #define  GPIO_SPEED_MEDIUM                        GPIO_SPEED_FREQ_MEDIUM
 #define  GPIO_SPEED_FAST                          GPIO_SPEED_FREQ_HIGH
 #define  GPIO_SPEED_HIGH                          GPIO_SPEED_FREQ_VERY_HIGH
-#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB*/
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB || STM32U5*/
 
 #if defined(STM32L1)
 #define  GPIO_SPEED_VERY_LOW    GPIO_SPEED_FREQ_LOW
@@ -616,6 +653,20 @@ extern "C" {
 #endif /* STM32F0 || STM32F3 || STM32F1 */
 
 #define GPIO_AF6_DFSDM                            GPIO_AF6_DFSDM1
+
+#if defined(STM32U5)
+#define GPIO_AF0_RTC_50Hz                         GPIO_AF0_RTC_50HZ
+#endif /* STM32U5 */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_GTZC_Aliased_Defines HAL GTZC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#if defined(STM32U5)
+#define GTZC_PERIPH_DCMI                      GTZC_PERIPH_DCMI_PSSI
+#endif /* STM32U5 */
 /**
   * @}
   */
@@ -853,6 +904,31 @@ extern "C" {
 #define LPTIM_TRIGSAMPLETIME_4TRANSITION        LPTIM_TRIGSAMPLETIME_4TRANSITIONS
 #define LPTIM_TRIGSAMPLETIME_8TRANSITION        LPTIM_TRIGSAMPLETIME_8TRANSITIONS
 
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define HAL_LPTIM_ReadCompare      HAL_LPTIM_ReadCapturedValue
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_LPTIM_Aliased_Defines LL LPTIM Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define LL_LPTIM_SetCompareCH1     LL_LPTIM_OC_SetCompareCH1
+#define LL_LPTIM_SetCompareCH2     LL_LPTIM_OC_SetCompareCH2
+#define LL_LPTIM_GetCompareCH1     LL_LPTIM_OC_GetCompareCH1
+#define LL_LPTIM_GetCompareCH2     LL_LPTIM_OC_GetCompareCH2
+/**
+  * @}
+  */
+
+#if defined(STM32U5)
+#define LPTIM_ISR_CC1        LPTIM_ISR_CC1IF
+#define LPTIM_ISR_CC2        LPTIM_ISR_CC2IF
+#define LPTIM_CHANNEL_ALL    0x00000000U
+#endif /* STM32U5 */
 /**
   * @}
   */
@@ -1379,6 +1455,20 @@ extern "C" {
   */
 #endif  /* STM32L4 ||  STM32F7 ||  STM32F4 ||  STM32H7 */
 
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \
+  || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \
+  || defined(STM32H7) || defined(STM32U5)
+/** @defgroup DMA2D_Aliases DMA2D API Aliases
+  * @{
+  */
+#define HAL_DMA2D_DisableCLUT       HAL_DMA2D_CLUTLoading_Abort    /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort
+                                                                        for compatibility with legacy code */
+/**
+  * @}
+  */
+
+#endif  /* STM32L4 ||  STM32F7 ||  STM32F4 ||  STM32H7 || STM32U5 */
+
 /** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
   * @{
   */
@@ -1397,6 +1487,29 @@ extern "C" {
   * @}
   */
 
+/** @defgroup HAL_DCACHE_Aliased_Functions HAL DCACHE Aliased Functions maintained for legacy purpose
+  * @{
+  */
+
+#if defined(STM32U5)
+#define HAL_DCACHE_CleanInvalidateByAddr     HAL_DCACHE_CleanInvalidByAddr
+#define HAL_DCACHE_CleanInvalidateByAddr_IT  HAL_DCACHE_CleanInvalidByAddr_IT
+#endif /* STM32U5 */
+
+/**
+  * @}
+  */
+
+#if !defined(STM32F2)
+/** @defgroup HASH_alias HASH API alias
+  * @{
+  */
+#define HAL_HASHEx_IRQHandler   HAL_HASH_IRQHandler  /*!< Redirection for compatibility with legacy code */
+/**
+  *
+  * @}
+  */
+#endif /* STM32F2 */
 /** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
   * @{
   */
@@ -3329,6 +3442,31 @@ extern "C" {
 #define RCC_DFSDM1CLKSOURCE_APB2            RCC_DFSDM1CLKSOURCE_PCLK2
 #define RCC_DFSDM2CLKSOURCE_APB2            RCC_DFSDM2CLKSOURCE_PCLK2
 #define RCC_FMPI2C1CLKSOURCE_APB            RCC_FMPI2C1CLKSOURCE_PCLK1
+#if defined(STM32U5)
+#define MSIKPLLModeSEL  RCC_MSIKPLL_MODE_SEL
+#define MSISPLLModeSEL  RCC_MSISPLL_MODE_SEL
+#define __HAL_RCC_AHB21_CLK_DISABLE           __HAL_RCC_AHB2_1_CLK_DISABLE
+#define __HAL_RCC_AHB22_CLK_DISABLE           __HAL_RCC_AHB2_2_CLK_DISABLE
+#define __HAL_RCC_AHB1_CLK_Disable_Clear      __HAL_RCC_AHB1_CLK_ENABLE
+#define __HAL_RCC_AHB21_CLK_Disable_Clear     __HAL_RCC_AHB2_1_CLK_ENABLE
+#define __HAL_RCC_AHB22_CLK_Disable_Clear     __HAL_RCC_AHB2_2_CLK_ENABLE
+#define __HAL_RCC_AHB3_CLK_Disable_Clear      __HAL_RCC_AHB3_CLK_ENABLE
+#define __HAL_RCC_APB1_CLK_Disable_Clear      __HAL_RCC_APB1_CLK_ENABLE
+#define __HAL_RCC_APB2_CLK_Disable_Clear      __HAL_RCC_APB2_CLK_ENABLE
+#define __HAL_RCC_APB3_CLK_Disable_Clear      __HAL_RCC_APB3_CLK_ENABLE
+#define IS_RCC_MSIPLLModeSelection            IS_RCC_MSIPLLMODE_SELECT
+#define RCC_PERIPHCLK_CLK48                   RCC_PERIPHCLK_ICLK
+#define RCC_CLK48CLKSOURCE_HSI48              RCC_ICLK_CLKSOURCE_HSI48
+#define RCC_CLK48CLKSOURCE_PLL2               RCC_ICLK_CLKSOURCE_PLL2
+#define RCC_CLK48CLKSOURCE_PLL1               RCC_ICLK_CLKSOURCE_PLL1
+#define RCC_CLK48CLKSOURCE_MSIK               RCC_ICLK_CLKSOURCE_MSIK
+#define __HAL_RCC_ADC1_CLK_ENABLE            __HAL_RCC_ADC12_CLK_ENABLE
+#define __HAL_RCC_ADC1_CLK_DISABLE          __HAL_RCC_ADC12_CLK_DISABLE
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED       __HAL_RCC_ADC12_IS_CLK_ENABLED
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED      __HAL_RCC_ADC12_IS_CLK_DISABLED
+#define __HAL_RCC_ADC1_FORCE_RESET          __HAL_RCC_ADC12_FORCE_RESET
+#define __HAL_RCC_ADC1_RELEASE_RESET       __HAL_RCC_ADC12_RELEASE_RESET
+#endif
 
 /**
   * @}
@@ -3346,7 +3484,7 @@ extern "C" {
 /** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
   * @{
   */
-#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL)
+#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5)
 #else
 #define __HAL_RTC_CLEAR_FLAG                      __HAL_RTC_EXTI_CLEAR_FLAG
 #endif
@@ -3403,13 +3541,22 @@ extern "C" {
   * @}
   */
 
-/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+/** @defgroup HAL_SD_Aliased_Macros HAL SD/MMC Aliased Macros maintained for legacy purpose
   * @{
   */
 
 #define SD_OCR_CID_CSD_OVERWRIETE   SD_OCR_CID_CSD_OVERWRITE
 #define SD_CMD_SD_APP_STAUS         SD_CMD_SD_APP_STATUS
 
+#if !defined(STM32F1) && !defined(STM32F2) && !defined(STM32F4) && !defined(STM32F7) && !defined(STM32L1)
+#define eMMC_HIGH_VOLTAGE_RANGE     EMMC_HIGH_VOLTAGE_RANGE
+#define eMMC_DUAL_VOLTAGE_RANGE     EMMC_DUAL_VOLTAGE_RANGE
+#define eMMC_LOW_VOLTAGE_RANGE      EMMC_LOW_VOLTAGE_RANGE
+
+#define SDMMC_NSpeed_CLK_DIV        SDMMC_NSPEED_CLK_DIV
+#define SDMMC_HSpeed_CLK_DIV        SDMMC_HSPEED_CLK_DIV
+#endif
+
 #if defined(STM32F4) || defined(STM32F2)
 #define  SD_SDMMC_DISABLED          SD_SDIO_DISABLED
 #define  SD_SDMMC_FUNCTION_BUSY     SD_SDIO_FUNCTION_BUSY
@@ -3738,6 +3885,16 @@ extern "C" {
   * @}
   */
 
+/** @defgroup HAL_Generic_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#if defined (STM32F7)
+#define ART_ACCLERATOR_ENABLE ART_ACCELERATOR_ENABLE
+#endif /* STM32F7 */
+/**
+  * @}
+  */
+
 /** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
   * @{
   */
@@ -3752,5 +3909,4 @@ extern "C" {
 
 #endif /* STM32_HAL_LEGACY */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
 

Inc/stm32_assert_template.h

@@ -8,13 +8,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -54,4 +53,3 @@ void assert_failed(uint8_t *file, uint32_t line);
 #endif /* STM32_ASSERT_H */
 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal.h

@@ -7,13 +7,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -623,4 +622,3 @@ void HAL_SYSCFG_CCMSRAM_WriteProtectionEnable(uint32_t Page);
 
 #endif /* STM32G4xx_HAL_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_adc.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -2033,5 +2032,3 @@ void ADC_DMAError(DMA_HandleTypeDef *hdma);
 
 
 #endif /* STM32G4xx_HAL_ADC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_adc_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -1392,6 +1391,3 @@ HAL_StatusTypeDef       HAL_ADCEx_EnterADCDeepPowerDownMode(ADC_HandleTypeDef *h
 #endif
 
 #endif /* STM32G4xx_HAL_ADC_EX_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_comp.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -90,7 +89,7 @@ typedef enum
 typedef struct __COMP_HandleTypeDef
 #else
 typedef struct
-#endif
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
 {
   COMP_TypeDef       *Instance;       /*!< Register base address    */
   COMP_InitTypeDef   Init;            /*!< COMP required parameters */
@@ -294,7 +293,7 @@ typedef  void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer
                                                     } while(0)
 #else
 #define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
-#endif
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
 
 /**
   * @brief Clear COMP error code (set it to no error code "HAL_COMP_ERROR_NONE").
@@ -963,7 +962,7 @@ typedef  void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer
 #define COMP_EXTI_LINE_COMP5           (LL_EXTI_LINE_31)  /*!< EXTI line 31 connected to COMP5 output. Note: For COMPx instance availability, please refer to datasheet */
 #define COMP_EXTI_LINE_COMP6           (LL_EXTI_LINE_32)  /*!< EXTI line 32 connected to COMP6 output. Note: For COMPx instance availability, please refer to datasheet */
 #define COMP_EXTI_LINE_COMP7           (LL_EXTI_LINE_33)  /*!< EXTI line 33 connected to COMP7 output. Note: For COMPx instance availability, please refer to datasheet */
-#endif
+#endif /* STM32G474xx || STM32G484xx || STM32G473xx || STM32G483xx */                  
 /**
   * @}
   */
@@ -1009,7 +1008,7 @@ typedef  void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer
                                              :((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2 \
                                              :((__INSTANCE__) == COMP3) ? COMP_EXTI_LINE_COMP3 \
                                              : COMP_EXTI_LINE_COMP4)
-#endif
+#endif /* STM32G474xx || STM32G484xx || STM32G473xx || STM32G483xx */
 /**
   * @}
   */
@@ -1252,7 +1251,7 @@ typedef  void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer
     || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM15_OC1)             \
     || ((__OUTPUT_BLANKING_SOURCE__) == COMP_BLANKINGSRC_TIM4_OC3)              \
     )
-#endif
+#endif /* STM32G474xx || STM32G484xx || STM32G473xx || STM32G483xx */
 
 #define IS_COMP_TRIGGERMODE(__MODE__)       (((__MODE__) == COMP_TRIGGERMODE_NONE)                 || \
                                              ((__MODE__) == COMP_TRIGGERMODE_IT_RISING)            || \
@@ -1349,5 +1348,3 @@ uint32_t              HAL_COMP_GetError(COMP_HandleTypeDef *hcomp);
 #endif
 
 #endif /* STM32G4xx_HAL_COMP_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_conf_template.h

@@ -8,13 +8,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -379,4 +378,3 @@ void assert_failed(uint8_t *file, uint32_t line);
 #endif /* STM32G4xx_HAL_CONF_H */
 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_cordic.h

@@ -7,13 +7,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -608,5 +607,3 @@ uint32_t HAL_CORDIC_GetError(CORDIC_HandleTypeDef *hcordic);
 #endif
 
 #endif /* STM32G4xx_HAL_CORDIC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_cortex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -418,4 +417,3 @@ void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
 #endif /* __STM32G4xx_HAL_CORTEX_H */
 
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_crc.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -60,19 +59,22 @@ typedef struct
 {
   uint8_t DefaultPolynomialUse;       /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used.
                                             If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default
-                                            X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1.
+                                            X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 +
+                                            X^4 + X^2+ X +1.
                                             In that case, there is no need to set GeneratingPolynomial field.
-                                            If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set. */
+                                            If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and
+                                            CRCLength fields must be set. */
 
   uint8_t DefaultInitValueUse;        /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used.
                                            If set to DEFAULT_INIT_VALUE_ENABLE, resort to default
-                                           0xFFFFFFFF value. In that case, there is no need to set InitValue field.
-                                           If otherwise set to DEFAULT_INIT_VALUE_DISABLE,  InitValue field must be set. */
+                                           0xFFFFFFFF value. In that case, there is no need to set InitValue field. If
+                                           otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set. */
 
   uint32_t GeneratingPolynomial;      /*!< Set CRC generating polynomial as a 7, 8, 16 or 32-bit long value for a polynomial degree
-                                           respectively equal to 7, 8, 16 or 32. This field is written in normal representation,
-                                           e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
-                                           No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE.   */
+                                           respectively equal to 7, 8, 16 or 32. This field is written in normal,
+                                           representation e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1
+                                           is written 0x65. No need to specify it if DefaultPolynomialUse is set to
+                                            DEFAULT_POLYNOMIAL_ENABLE.   */
 
   uint32_t CRCLength;                 /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length.
                                            Value can be either one of
@@ -87,14 +89,18 @@ typedef struct
   uint32_t InputDataInversionMode;    /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode.
                                            Can be either one of the following values
                                            @arg @ref CRC_INPUTDATA_INVERSION_NONE       no input data inversion
-                                           @arg @ref CRC_INPUTDATA_INVERSION_BYTE       byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2
-                                           @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD   halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C
-                                           @arg @ref CRC_INPUTDATA_INVERSION_WORD       word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */
+                                           @arg @ref CRC_INPUTDATA_INVERSION_BYTE       byte-wise inversion, 0x1A2B3C4D
+                                           becomes 0x58D43CB2
+                                           @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD   halfword-wise inversion,
+                                           0x1A2B3C4D becomes 0xD458B23C
+                                           @arg @ref CRC_INPUTDATA_INVERSION_WORD       word-wise inversion, 0x1A2B3C4D
+                                           becomes 0xB23CD458 */
 
   uint32_t OutputDataInversionMode;   /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode.
                                             Can be either
                                             @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE   no CRC inversion,
-                                            @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE    CRC 0x11223344 is converted into 0x22CC4488 */
+                                            @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE    CRC 0x11223344 is converted
+                                             into 0x22CC4488 */
 } CRC_InitTypeDef;
 
 /**
@@ -112,12 +118,16 @@ typedef struct
 
   uint32_t InputDataFormat;                /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format.
                                             Can be either
-                                            @arg @ref CRC_INPUTDATA_FORMAT_BYTES       input data is a stream of bytes (8-bit data)
-                                            @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS   input data is a stream of half-words (16-bit data)
-                                            @arg @ref CRC_INPUTDATA_FORMAT_WORDS       input data is a stream of words (32-bit data)
-
-                                           Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error
-                                           must occur if InputBufferFormat is not one of the three values listed above  */
+                                            @arg @ref CRC_INPUTDATA_FORMAT_BYTES       input data is a stream of bytes
+                                            (8-bit data)
+                                            @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS   input data is a stream of
+                                            half-words (16-bit data)
+                                            @arg @ref CRC_INPUTDATA_FORMAT_WORDS       input data is a stream of words
+                                            (32-bit data)
+
+                                          Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization
+                                          error must occur if InputBufferFormat is not one of the three values listed
+                                          above  */
 } CRC_HandleTypeDef;
 /**
   * @}
@@ -199,15 +209,6 @@ typedef struct
   * @}
   */
 
-/** @defgroup CRC_Aliases CRC API aliases
-  * @{
-  */
-#define HAL_CRC_Input_Data_Reverse   HAL_CRCEx_Input_Data_Reverse    /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility  */
-#define HAL_CRC_Output_Data_Reverse  HAL_CRCEx_Output_Data_Reverse   /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */
-/**
-  * @}
-  */
-
 /**
   * @}
   */
@@ -339,5 +340,3 @@ HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
 #endif
 
 #endif /* STM32G4xx_HAL_CRC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_crc_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -149,5 +148,3 @@ HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_
 #endif
 
 #endif /* STM32G4xx_HAL_CRC_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_cryp.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -107,7 +106,7 @@ typedef enum
 typedef struct __CRYP_HandleTypeDef
 #else
 typedef struct
-#endif
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
 {
   AES_TypeDef                       *Instance;        /*!< AES Register base address */
 
@@ -644,5 +643,3 @@ uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp);
 #endif
 
 #endif /* STM32G4xx_HAL_CRYP_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_cryp_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics. 
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the 
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -129,5 +128,3 @@ void  HAL_CRYPEx_DisableAutoKeyDerivation(CRYP_HandleTypeDef *hcryp);
 #endif
 
 #endif /* STM32G4xx_HAL_CRYP_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_dac.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -79,19 +78,19 @@ typedef struct
   __IO uint32_t               ErrorCode;     /*!< DAC Error code                    */
 
 #if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
-  void (* ConvCpltCallbackCh1)(struct __DAC_HandleTypeDef *hdac);
-  void (* ConvHalfCpltCallbackCh1)(struct __DAC_HandleTypeDef *hdac);
-  void (* ErrorCallbackCh1)(struct __DAC_HandleTypeDef *hdac);
-  void (* DMAUnderrunCallbackCh1)(struct __DAC_HandleTypeDef *hdac);
+  void (* ConvCpltCallbackCh1)            (struct __DAC_HandleTypeDef *hdac);
+  void (* ConvHalfCpltCallbackCh1)        (struct __DAC_HandleTypeDef *hdac);
+  void (* ErrorCallbackCh1)               (struct __DAC_HandleTypeDef *hdac);
+  void (* DMAUnderrunCallbackCh1)         (struct __DAC_HandleTypeDef *hdac);
 
-  void (* ConvCpltCallbackCh2)(struct __DAC_HandleTypeDef *hdac);
-  void (* ConvHalfCpltCallbackCh2)(struct __DAC_HandleTypeDef *hdac);
-  void (* ErrorCallbackCh2)(struct __DAC_HandleTypeDef *hdac);
-  void (* DMAUnderrunCallbackCh2)(struct __DAC_HandleTypeDef *hdac);
+  void (* ConvCpltCallbackCh2)            (struct __DAC_HandleTypeDef *hdac);
+  void (* ConvHalfCpltCallbackCh2)        (struct __DAC_HandleTypeDef *hdac);
+  void (* ErrorCallbackCh2)               (struct __DAC_HandleTypeDef *hdac);
+  void (* DMAUnderrunCallbackCh2)         (struct __DAC_HandleTypeDef *hdac);
 
 
-  void (* MspInitCallback)(struct __DAC_HandleTypeDef *hdac);
-  void (* MspDeInitCallback)(struct __DAC_HandleTypeDef *hdac);
+  void (* MspInitCallback)                (struct __DAC_HandleTypeDef *hdac);
+  void (* MspDeInitCallback)              (struct __DAC_HandleTypeDef *hdac);
 #endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
 
 } DAC_HandleTypeDef;
@@ -613,4 +612,3 @@ void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma);
 
 #endif /* STM32G4xx_HAL_DAC_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_dac_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -344,4 +343,3 @@ void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma);
 
 #endif /* STM32G4xx_HAL_DAC_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_def.h

@@ -7,13 +7,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -208,4 +207,3 @@ typedef enum
 
 #endif /* ___STM32G4xx_HAL_DEF */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_dma.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -851,4 +850,3 @@ uint32_t             HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
 
 #endif /* __STM32G4xx_HAL_DMA_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_dma_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -263,4 +262,3 @@ void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma);
 
 #endif /* __STM32G4xx_HAL_DMA_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_exti.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -314,4 +313,3 @@ void              HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
 
 #endif /* STM32G4xx_HAL_EXTI_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_fdcan.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -1268,14 +1267,6 @@ HAL_FDCAN_StateTypeDef HAL_FDCAN_GetState(FDCAN_HandleTypeDef *hfdcan);
   */
 
 /* Private types -------------------------------------------------------------*/
-/** @defgroup FDCAN_Private_Types FDCAN Private Types
-  * @{
-  */
-
-/**
-  * @}
-  */
-
 /* Private variables ---------------------------------------------------------*/
 /** @defgroup FDCAN_Private_Variables FDCAN Private Variables
   * @{
@@ -1330,8 +1321,8 @@ HAL_FDCAN_StateTypeDef HAL_FDCAN_GetState(FDCAN_HandleTypeDef *hfdcan);
 #define IS_FDCAN_DATA_SJW(SJW) (((SJW) >= 1U) && ((SJW) <= 16U))
 #define IS_FDCAN_DATA_TSEG1(TSEG1) (((TSEG1) >= 1U) && ((TSEG1) <= 32U))
 #define IS_FDCAN_DATA_TSEG2(TSEG2) (((TSEG2) >= 1U) && ((TSEG2) <= 16U))
-#define IS_FDCAN_MAX_VALUE(VALUE, MAX) ((VALUE) <= (MAX))
-#define IS_FDCAN_MIN_VALUE(VALUE, MIN) ((VALUE) >= (MIN))
+#define IS_FDCAN_MAX_VALUE(VALUE, _MAX_) ((VALUE) <= (_MAX_))
+#define IS_FDCAN_MIN_VALUE(VALUE, _MIN_) ((VALUE) >= (_MIN_))
 #define IS_FDCAN_TX_FIFO_QUEUE_MODE(MODE) (((MODE) == FDCAN_TX_FIFO_OPERATION ) || \
                                            ((MODE) == FDCAN_TX_QUEUE_OPERATION))
 #define IS_FDCAN_ID_TYPE(ID_TYPE) (((ID_TYPE) == FDCAN_STANDARD_ID) || \
@@ -1420,22 +1411,8 @@ HAL_FDCAN_StateTypeDef HAL_FDCAN_GetState(FDCAN_HandleTypeDef *hfdcan);
   */
 
 /* Private functions prototypes ----------------------------------------------*/
-/** @defgroup FDCAN_Private_Functions_Prototypes FDCAN Private Functions Prototypes
-  * @{
-  */
-
-/**
-  * @}
-  */
-
 /* Private functions ---------------------------------------------------------*/
-/** @defgroup FDCAN_Private_Functions FDCAN Private Functions
-  * @{
-  */
 
-/**
-  * @}
-  */
 /**
   * @}
   */
@@ -1450,6 +1427,3 @@ HAL_FDCAN_StateTypeDef HAL_FDCAN_GetState(FDCAN_HandleTypeDef *hfdcan);
 #endif
 
 #endif /* STM32G4xx_HAL_FDCAN_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_flash.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                       opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */
 
@@ -880,7 +879,8 @@ HAL_StatusTypeDef  FLASH_WaitForLastOperation(uint32_t Timeout);
 #define FLASH_SIZE                      ((((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0xFFFFU)) ? (0x80UL << 10U) : \
                                         (((*((uint32_t *)FLASH_SIZE_DATA_REGISTER)) & 0xFFFFUL) << 10U))
 #define FLASH_BANK_SIZE                 (FLASH_SIZE)
-#define FLASH_PAGE_NB                   ((FLASH_SIZE == 0x00080000U) ? 256U : 64U)
+#define FLASH_PAGE_NB                   ((FLASH_SIZE == 0x00080000U) ? 256U : \
+                                        ((FLASH_SIZE == 0x00040000U) ? 128U : 64U))
 #endif
 
 #define FLASH_PAGE_SIZE                 0x800U  /* 2 KB */
@@ -1015,4 +1015,3 @@ HAL_StatusTypeDef  FLASH_WaitForLastOperation(uint32_t Timeout);
 
 #endif /* STM32G4xx_HAL_FLASH_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_flash_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                       opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */
 
@@ -88,4 +87,3 @@ void              FLASH_FlushCaches(void);
 
 #endif /* STM32G4xx_HAL_FLASH_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_flash_ramfunc.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                       opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */
 
@@ -73,4 +72,3 @@ __RAM_FUNC HAL_StatusTypeDef HAL_FLASHEx_OB_DBankConfig(uint32_t DBankConfig);
 
 #endif /* STM32G4xx_FLASH_RAMFUNC_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_fmac.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -689,5 +688,3 @@ uint32_t HAL_FMAC_GetError(FMAC_HandleTypeDef *hfmac);
 #endif
 
 #endif /* STM32G4xx_HAL_FMAC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_gpio.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -107,26 +106,28 @@ typedef enum
 
 /** @defgroup GPIO_mode GPIO mode
   * @brief GPIO Configuration Mode
-  *        Elements values convention: 0xX0yz00YZ
-  *           - X  : GPIO mode or EXTI Mode
-  *           - y  : External IT or Event trigger detection
-  *           - z  : IO configuration on External IT or Event
-  *           - Y  : Output type (Push Pull or Open Drain)
-  *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)
+  *        Elements values convention: 0x00WX00YZ
+  *           - W  : EXTI trigger detection on 3 bits
+  *           - X  : EXTI mode (IT or Event) on 2 bits
+  *           - Y  : Output type (Push Pull or Open Drain) on 1 bit
+  *           - Z  : GPIO mode (Input, Output, Alternate or Analog) on 2 bits
   * @{
-  */
-#define  GPIO_MODE_INPUT                        (0x00000000U)   /*!< Input Floating Mode                   */
-#define  GPIO_MODE_OUTPUT_PP                    (0x00000001U)   /*!< Output Push Pull Mode                 */
-#define  GPIO_MODE_OUTPUT_OD                    (0x00000011U)   /*!< Output Open Drain Mode                */
-#define  GPIO_MODE_AF_PP                        (0x00000002U)   /*!< Alternate Function Push Pull Mode     */
-#define  GPIO_MODE_AF_OD                        (0x00000012U)   /*!< Alternate Function Open Drain Mode    */
-#define  GPIO_MODE_ANALOG                       (0x00000003U)   /*!< Analog Mode  */
-#define  GPIO_MODE_IT_RISING                    (0x10110000U)   /*!< External Interrupt Mode with Rising edge trigger detection          */
-#define  GPIO_MODE_IT_FALLING                   (0x10210000U)   /*!< External Interrupt Mode with Falling edge trigger detection         */
-#define  GPIO_MODE_IT_RISING_FALLING            (0x10310000U)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
-#define  GPIO_MODE_EVT_RISING                   (0x10120000U)   /*!< External Event Mode with Rising edge trigger detection              */
-#define  GPIO_MODE_EVT_FALLING                  (0x10220000U)   /*!< External Event Mode with Falling edge trigger detection             */
-#define  GPIO_MODE_EVT_RISING_FALLING           (0x10320000U)   /*!< External Event Mode with Rising/Falling edge trigger detection      */
+  */ 
+#define  GPIO_MODE_INPUT                        MODE_INPUT                                                  /*!< Input Floating Mode                   */
+#define  GPIO_MODE_OUTPUT_PP                    (MODE_OUTPUT | OUTPUT_PP)                                   /*!< Output Push Pull Mode                 */
+#define  GPIO_MODE_OUTPUT_OD                    (MODE_OUTPUT | OUTPUT_OD)                                   /*!< Output Open Drain Mode                */
+#define  GPIO_MODE_AF_PP                        (MODE_AF | OUTPUT_PP)                                       /*!< Alternate Function Push Pull Mode     */
+#define  GPIO_MODE_AF_OD                        (MODE_AF | OUTPUT_OD)                                       /*!< Alternate Function Open Drain Mode    */
+
+#define  GPIO_MODE_ANALOG                       MODE_ANALOG                                                 /*!< Analog Mode  */
+    
+#define  GPIO_MODE_IT_RISING                    (MODE_INPUT | EXTI_IT | TRIGGER_RISING)                     /*!< External Interrupt Mode with Rising edge trigger detection          */
+#define  GPIO_MODE_IT_FALLING                   (MODE_INPUT | EXTI_IT | TRIGGER_FALLING)                    /*!< External Interrupt Mode with Falling edge trigger detection         */
+#define  GPIO_MODE_IT_RISING_FALLING            (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
+ 
+#define  GPIO_MODE_EVT_RISING                   (MODE_INPUT | EXTI_EVT | TRIGGER_RISING)                     /*!< External Event Mode with Rising edge trigger detection             */
+#define  GPIO_MODE_EVT_FALLING                  (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING)                    /*!< External Event Mode with Falling edge trigger detection            */
+#define  GPIO_MODE_EVT_RISING_FALLING           (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING)   /*!< External Event Mode with Rising/Falling edge trigger detection     */
 /**
   * @}
   */
@@ -208,6 +209,31 @@ typedef enum
   */
 
 /* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+  * @{
+  */
+#define GPIO_MODE_Pos                           0U
+#define GPIO_MODE                               (0x3UL << GPIO_MODE_Pos)
+#define MODE_INPUT                              (0x0UL << GPIO_MODE_Pos)
+#define MODE_OUTPUT                             (0x1UL << GPIO_MODE_Pos)
+#define MODE_AF                                 (0x2UL << GPIO_MODE_Pos)
+#define MODE_ANALOG                             (0x3UL << GPIO_MODE_Pos)
+#define OUTPUT_TYPE_Pos                         4U
+#define OUTPUT_TYPE                             (0x1UL << OUTPUT_TYPE_Pos)
+#define OUTPUT_PP                               (0x0UL << OUTPUT_TYPE_Pos)
+#define OUTPUT_OD                               (0x1UL << OUTPUT_TYPE_Pos)
+#define EXTI_MODE_Pos                           16U
+#define EXTI_MODE                               (0x3UL << EXTI_MODE_Pos)
+#define EXTI_IT                                 (0x1UL << EXTI_MODE_Pos)
+#define EXTI_EVT                                (0x2UL << EXTI_MODE_Pos)
+#define TRIGGER_MODE_Pos                         20U
+#define TRIGGER_MODE                            (0x7UL << TRIGGER_MODE_Pos)
+#define TRIGGER_RISING                          (0x1UL << TRIGGER_MODE_Pos)
+#define TRIGGER_FALLING                         (0x2UL << TRIGGER_MODE_Pos)
+/**
+  * @}
+  */
+
 /** @defgroup GPIO_Private_Macros GPIO Private Macros
   * @{
   */
@@ -298,4 +324,3 @@ void              HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
 
 #endif /* STM32G4xx_HAL_GPIO_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_gpio_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -339,4 +338,3 @@ extern "C" {
 
 #endif /* STM32G4xx_HAL_GPIO_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_hrtim.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -1290,7 +1289,7 @@ typedef void (* pHRTIM_TIMxCallbackTypeDef)(HRTIM_HandleTypeDef *hhrtim,    /*!<
 /** @defgroup HRTIM_Output_Reset_Source HRTIM Output Reset Source
   * @{
   * @brief Constants defining the events that can be selected to configure the
-  *        set crossbar of a timer output
+  *        reset crossbar of a timer output
   */
 #define HRTIM_OUTPUTRESET_NONE       0x00000000U                      /*!< Reset the output reset crossbar */
 #define HRTIM_OUTPUTRESET_RESYNC     (HRTIM_RST1R_RESYNC)             /*!< Timer reset event coming solely from software or SYNC input forces the output to its inactive state */
@@ -1793,10 +1792,10 @@ typedef void (* pHRTIM_TIMxCallbackTypeDef)(HRTIM_HandleTypeDef *hhrtim,    /*!<
   * @brief Constants defining the source and event to be sent on the
   *        synchronization outputs
   */
-#define HRTIM_SYNCOUTPUTSOURCE_MASTER_START 0x00000000U                                    /*!< A pulse is sent on the SYNCOUT output upon master timer start event */
-#define HRTIM_SYNCOUTPUTSOURCE_MASTER_CMP1  (HRTIM_MCR_SYNC_SRC_0)                         /*!< A pulse is sent on the SYNCOUT output upon master timer compare 1 event*/
-#define HRTIM_SYNCOUTPUTSOURCE_TIMA_START   (HRTIM_MCR_SYNC_SRC_1)                         /*!< A pulse is sent on the SYNCOUT output upon timer A start or reset events */
-#define HRTIM_SYNCOUTPUTSOURCE_TIMA_CMP1    (HRTIM_MCR_SYNC_SRC_1 | HRTIM_MCR_SYNC_SRC_0)  /*!< A pulse is sent on the SYNCOUT output upon timer A compare 1 event */
+#define HRTIM_SYNCOUTPUTSOURCE_MASTER_START 0x00000000U                                    /*!< A pulse is sent on HRTIM_SCOUT output and hrtim_out_sync2 upon master timer start event      */
+#define HRTIM_SYNCOUTPUTSOURCE_MASTER_CMP1  (HRTIM_MCR_SYNC_SRC_0)                         /*!< A pulse is sent on HRTIM_SCOUT output and hrtim_out_sync2 upon master timer compare 1 event  */
+#define HRTIM_SYNCOUTPUTSOURCE_TIMA_START   (HRTIM_MCR_SYNC_SRC_1)                         /*!< A pulse is sent on HRTIM_SCOUT output and hrtim_out_sync2 upon timer A start or reset events */
+#define HRTIM_SYNCOUTPUTSOURCE_TIMA_CMP1    (HRTIM_MCR_SYNC_SRC_1 | HRTIM_MCR_SYNC_SRC_0)  /*!< A pulse is sent on HRTIM_SCOUT output and hrtim_out_sync2 upon timer A compare 1 event       */
 /**
   * @}
   */
@@ -5140,5 +5139,3 @@ HAL_StatusTypeDef HAL_HRTIM_TIMxUnRegisterCallback(HRTIM_HandleTypeDef *       h
 #endif
 
 #endif /* STM32G4xx_HAL_HRTIM_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_i2c.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -48,29 +47,30 @@ extern "C" {
 typedef struct
 {
   uint32_t Timing;              /*!< Specifies the I2C_TIMINGR_register value.
-                                  This parameter calculated by referring to I2C initialization
-                                         section in Reference manual */
+                                     This parameter calculated by referring to I2C initialization section
+                                     in Reference manual */
 
   uint32_t OwnAddress1;         /*!< Specifies the first device own address.
-                                  This parameter can be a 7-bit or 10-bit address. */
+                                     This parameter can be a 7-bit or 10-bit address. */
 
   uint32_t AddressingMode;      /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
-                                  This parameter can be a value of @ref I2C_ADDRESSING_MODE */
+                                     This parameter can be a value of @ref I2C_ADDRESSING_MODE */
 
   uint32_t DualAddressMode;     /*!< Specifies if dual addressing mode is selected.
-                                  This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
+                                     This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
 
   uint32_t OwnAddress2;         /*!< Specifies the second device own address if dual addressing mode is selected
-                                  This parameter can be a 7-bit address. */
+                                     This parameter can be a 7-bit address. */
 
-  uint32_t OwnAddress2Masks;    /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
-                                  This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
+  uint32_t OwnAddress2Masks;    /*!< Specifies the acknowledge mask address second device own address if dual addressing
+                                     mode is selected.
+                                     This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
 
   uint32_t GeneralCallMode;     /*!< Specifies if general call mode is selected.
-                                  This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
+                                     This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
 
   uint32_t NoStretchMode;       /*!< Specifies if nostretch mode is selected.
-                                  This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
+                                     This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
 
 } I2C_InitTypeDef;
 
@@ -200,7 +200,8 @@ typedef struct __I2C_HandleTypeDef
 
   __IO uint32_t              PreviousState;  /*!< I2C communication Previous state          */
 
-  HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);  /*!< I2C transfer IRQ handler function pointer */
+  HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+  /*!< I2C transfer IRQ handler function pointer */
 
   DMA_HandleTypeDef          *hdmatx;        /*!< I2C Tx DMA handle parameters              */
 
@@ -217,20 +218,32 @@ typedef struct __I2C_HandleTypeDef
   __IO uint32_t              AddrEventCount; /*!< I2C Address Event counter                 */
 
 #if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
-  void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);           /*!< I2C Master Tx Transfer completed callback */
-  void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);           /*!< I2C Master Rx Transfer completed callback */
-  void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);            /*!< I2C Slave Tx Transfer completed callback  */
-  void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);            /*!< I2C Slave Rx Transfer completed callback  */
-  void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c);             /*!< I2C Listen Complete callback              */
-  void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Memory Tx Transfer completed callback */
-  void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Memory Rx Transfer completed callback */
-  void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c);                  /*!< I2C Error callback                        */
-  void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Abort callback                        */
-
-  void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);  /*!< I2C Slave Address Match callback */
-
-  void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c);                /*!< I2C Msp Init callback                     */
-  void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Msp DeInit callback                   */
+  void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+  /*!< I2C Master Tx Transfer completed callback */
+  void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+  /*!< I2C Master Rx Transfer completed callback */
+  void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+  /*!< I2C Slave Tx Transfer completed callback  */
+  void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+  /*!< I2C Slave Rx Transfer completed callback  */
+  void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+  /*!< I2C Listen Complete callback              */
+  void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+  /*!< I2C Memory Tx Transfer completed callback */
+  void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+  /*!< I2C Memory Rx Transfer completed callback */
+  void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c);
+  /*!< I2C Error callback                        */
+  void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+  /*!< I2C Abort callback                        */
+
+  void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+  /*!< I2C Slave Address Match callback */
+
+  void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c);
+  /*!< I2C Msp Init callback                     */
+  void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c);
+  /*!< I2C Msp DeInit callback                   */
 
 #endif  /* USE_HAL_I2C_REGISTER_CALLBACKS */
 } I2C_HandleTypeDef;
@@ -259,8 +272,11 @@ typedef enum
 /**
   * @brief  HAL I2C Callback pointer definition
   */
-typedef  void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */
-typedef  void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */
+typedef  void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c);
+/*!< pointer to an I2C callback function */
+typedef  void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection,
+                                          uint16_t AddrMatchCode);
+/*!< pointer to an I2C Address Match callback function */
 
 #endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
 /**
@@ -440,14 +456,14 @@ typedef  void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t Trans
   * @retval None
   */
 #if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
-#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__)                do{                                                   \
-                                                                    (__HANDLE__)->State = HAL_I2C_STATE_RESET;       \
-                                                                    (__HANDLE__)->MspInitCallback = NULL;            \
-                                                                    (__HANDLE__)->MspDeInitCallback = NULL;          \
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__)                do{                                             \
+                                                                    (__HANDLE__)->State = HAL_I2C_STATE_RESET;  \
+                                                                    (__HANDLE__)->MspInitCallback = NULL;       \
+                                                                    (__HANDLE__)->MspDeInitCallback = NULL;     \
                                                                   } while(0)
 #else
 #define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__)                ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
-#endif
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
 
 /** @brief  Enable the specified I2C interrupt.
   * @param  __HANDLE__ specifies the I2C Handle.
@@ -542,26 +558,27 @@ typedef  void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t Trans
   *
   * @retval None
   */
-#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
-                                                    : ((__HANDLE__)->Instance->ICR = (__FLAG__)))
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? \
+                                                    ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \
+                                                    ((__HANDLE__)->Instance->ICR = (__FLAG__)))
 
 /** @brief  Enable the specified I2C peripheral.
   * @param  __HANDLE__ specifies the I2C Handle.
   * @retval None
   */
-#define __HAL_I2C_ENABLE(__HANDLE__)                            (SET_BIT((__HANDLE__)->Instance->CR1,  I2C_CR1_PE))
+#define __HAL_I2C_ENABLE(__HANDLE__)                         (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
 
 /** @brief  Disable the specified I2C peripheral.
   * @param  __HANDLE__ specifies the I2C Handle.
   * @retval None
   */
-#define __HAL_I2C_DISABLE(__HANDLE__)                           (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+#define __HAL_I2C_DISABLE(__HANDLE__)                        (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
 
 /** @brief  Generate a Non-Acknowledge I2C peripheral in Slave mode.
   * @param  __HANDLE__ specifies the I2C Handle.
   * @retval None
   */
-#define __HAL_I2C_GENERATE_NACK(__HANDLE__)                     (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
+#define __HAL_I2C_GENERATE_NACK(__HANDLE__)                  (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
 /**
   * @}
   */
@@ -601,12 +618,14 @@ HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
   */
 /* IO operation functions  ****************************************************/
 /******* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size,
-                                          uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size,
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                          uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+                                         uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
                                          uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+                                        uint32_t Timeout);
 HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
                                     uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
 HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
@@ -757,10 +776,14 @@ uint32_t             HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
                                                         ((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
 
 #define I2C_RESET_CR2(__HANDLE__)                 ((__HANDLE__)->Instance->CR2 &= \
-                                                   (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
-
-#define I2C_GET_ADDR_MATCH(__HANDLE__)            ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U))
-#define I2C_GET_DIR(__HANDLE__)                   ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U))
+                                                   (uint32_t)~((uint32_t)(I2C_CR2_SADD   | I2C_CR2_HEAD10R | \
+                                                                          I2C_CR2_NBYTES | I2C_CR2_RELOAD  | \
+                                                                          I2C_CR2_RD_WRN)))
+
+#define I2C_GET_ADDR_MATCH(__HANDLE__)            ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) \
+                                                              >> 16U))
+#define I2C_GET_DIR(__HANDLE__)                   ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) \
+                                                             >> 16U))
 #define I2C_GET_STOP_MODE(__HANDLE__)             ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
 #define I2C_GET_OWN_ADDRESS1(__HANDLE__)          ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1))
 #define I2C_GET_OWN_ADDRESS2(__HANDLE__)          ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2))
@@ -772,10 +795,15 @@ uint32_t             HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
                                                                          (uint16_t)(0xFF00U))) >> 8U)))
 #define I2C_MEM_ADD_LSB(__ADDRESS__)              ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
 
-#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
-                                                     (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? \
+                                                     (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \
+                                                                 (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \
+                                                                (~I2C_CR2_RD_WRN)) : \
+                                                     (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \
+                                                                 (I2C_CR2_ADD10) | (I2C_CR2_START)) & \
+                                                                (~I2C_CR2_RD_WRN)))
 
-#define I2C_CHECK_FLAG(__ISR__, __FLAG__)         ((((__ISR__) &  ((__FLAG__) & I2C_FLAG_MASK)) == \
+#define I2C_CHECK_FLAG(__ISR__, __FLAG__)         ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \
                                                     ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
 #define I2C_CHECK_IT_SOURCE(__CR1__, __IT__)      ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
 /**
@@ -805,5 +833,3 @@ uint32_t             HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
 
 
 #endif /* STM32G4xx_HAL_I2C_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_i2c_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -66,7 +65,7 @@ extern "C" {
 #define I2C_FASTMODEPLUS_I2C4           SYSCFG_CFGR1_I2C4_FMP                           /*!< Enable Fast Mode Plus on I2C4 pins */
 #else
 #define I2C_FASTMODEPLUS_I2C4           (uint32_t)(0x00000800U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C4 not supported  */
-#endif
+#endif /* SYSCFG_CFGR1_I2C4_FMP */
 /**
   * @}
   */
@@ -89,7 +88,7 @@ extern "C" {
   * @{
   */
 
-/** @addtogroup I2CEx_Exported_Functions_Group1 I2C Extended Filter Mode Functions
+/** @addtogroup I2CEx_Exported_Functions_Group1 Filter Mode Functions
   * @{
   */
 /* Peripheral Control functions  ************************************************/
@@ -99,7 +98,7 @@ HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_
   * @}
   */
 
-/** @addtogroup I2CEx_Exported_Functions_Group2 I2C Extended WakeUp Mode Functions
+/** @addtogroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions
   * @{
   */
 HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c);
@@ -108,7 +107,7 @@ HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c);
   * @}
   */
 
-/** @addtogroup I2CEx_Exported_Functions_Group3 I2C Extended FastModePlus Functions
+/** @addtogroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions
   * @{
   */
 void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
@@ -117,7 +116,6 @@ void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
   * @}
   */
 
-
 /**
   * @}
   */
@@ -175,5 +173,3 @@ void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
 #endif
 
 #endif /* STM32G4xx_HAL_I2C_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_i2s.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -553,4 +552,3 @@ uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
 
 #endif /* STM32G4xx_HAL_I2S_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_irda.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -144,7 +143,7 @@ typedef struct
 
   IRDA_InitTypeDef         Init;             /*!< IRDA communication parameters      */
 
-  uint8_t                  *pTxBuffPtr;      /*!< Pointer to IRDA Tx transfer Buffer */
+  const uint8_t            *pTxBuffPtr;      /*!< Pointer to IRDA Tx transfer Buffer */
 
   uint16_t                 TxXferSize;       /*!< IRDA Tx Transfer size              */
 
@@ -828,11 +827,11 @@ HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRD
   */
 
 /* IO operation functions *****************************************************/
-HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size, uint32_t Timeout);
 HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda);
 HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda);
@@ -891,4 +890,3 @@ uint32_t              HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
 
 #endif /* STM32G4xx_HAL_IRDA_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_irda_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -421,4 +420,3 @@ extern "C" {
 
 #endif /* STM32G4xx_HAL_IRDA_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_iwdg.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -236,5 +235,3 @@ HAL_StatusTypeDef     HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
 #endif
 
 #endif /* STM32G4xx_HAL_IWDG_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_lptim.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -97,30 +96,30 @@ typedef struct
   */
 typedef struct
 {
-  LPTIM_ClockConfigTypeDef     Clock;               /*!< Specifies the clock parameters */
+  LPTIM_ClockConfigTypeDef     Clock;             /*!< Specifies the clock parameters */
 
-  LPTIM_ULPClockConfigTypeDef  UltraLowPowerClock;  /*!< Specifies the Ultra Low Power clock parameters */
+  LPTIM_ULPClockConfigTypeDef  UltraLowPowerClock;/*!< Specifies the Ultra Low Power clock parameters */
 
-  LPTIM_TriggerConfigTypeDef   Trigger;             /*!< Specifies the Trigger parameters */
+  LPTIM_TriggerConfigTypeDef   Trigger;           /*!< Specifies the Trigger parameters */
 
-  uint32_t                     OutputPolarity;      /*!< Specifies the Output polarity.
-                                                    This parameter can be a value of @ref LPTIM_Output_Polarity */
+  uint32_t                     OutputPolarity;    /*!< Specifies the Output polarity.
+                                                  This parameter can be a value of @ref LPTIM_Output_Polarity */
 
-  uint32_t                     UpdateMode;          /*!< Specifies whether the update of the autoreload and the compare
-                                                    values is done immediately or after the end of current period.
-                                                    This parameter can be a value of @ref LPTIM_Updating_Mode */
+  uint32_t                     UpdateMode;        /*!< Specifies whether the update of the autoreload and the compare
+                                                  values is done immediately or after the end of current period.
+                                                  This parameter can be a value of @ref LPTIM_Updating_Mode */
 
-  uint32_t                     CounterSource;       /*!< Specifies whether the counter is incremented each internal event
-                                                    or each external event.
-                                                    This parameter can be a value of @ref LPTIM_Counter_Source */
+  uint32_t                     CounterSource;     /*!< Specifies whether the counter is incremented each internal event
+                                                  or each external event.
+                                                  This parameter can be a value of @ref LPTIM_Counter_Source */
 
-  uint32_t                     Input1Source;        /*!< Specifies source selected for input1 (GPIO or comparator output).
-                                                    This parameter can be a value of @ref LPTIM_Input1_Source */
+  uint32_t                     Input1Source;      /*!< Specifies source selected for input1 (GPIO or comparator output).
+                                                  This parameter can be a value of @ref LPTIM_Input1_Source */
 
-  uint32_t                     Input2Source;        /*!< Specifies source selected for input2 (GPIO or comparator output).
-                                                    Note: This parameter is used only for encoder feature so is used only
-                                                    for LPTIM1 instance.
-                                                    This parameter can be a value of @ref LPTIM_Input2_Source */
+  uint32_t                     Input2Source;      /*!< Specifies source selected for input2 (GPIO or comparator output).
+                                                  Note: This parameter is used only for encoder feature so is used only
+                                                  for LPTIM1 instance.
+                                                  This parameter can be a value of @ref LPTIM_Input2_Source */
 } LPTIM_InitTypeDef;
 
 /**
@@ -874,5 +873,3 @@ void LPTIM_Disable(LPTIM_HandleTypeDef *hlptim);
 #endif
 
 #endif /* STM32G4xx_HAL_LPTIM_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_nand.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                       opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -325,8 +324,10 @@ uint32_t              HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
   * @retval NAND Raw address value
   */
 #define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
-                                                 (((__ADDRESS__)->Block + (((__ADDRESS__)->Plane) * \
-                                                 ((__HANDLE__)->Config.PlaneSize)))* ((__HANDLE__)->Config.BlockSize)))
+                                                 (((__ADDRESS__)->Block + \
+                                                   (((__ADDRESS__)->Plane) * \
+                                                    ((__HANDLE__)->Config.PlaneSize))) * \
+                                                  ((__HANDLE__)->Config.BlockSize)))
 
 /**
   * @brief  NAND memory Column address computation.
@@ -376,5 +377,3 @@ uint32_t              HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
 #endif
 
 #endif /* STM32G4xx_HAL_NAND_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_nor.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                       opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -325,5 +324,3 @@ HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Addres
 #endif
 
 #endif /* STM32G4xx_HAL_NOR_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_opamp.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -452,7 +451,7 @@ typedef void (*pOPAMP_CallbackTypeDef)(OPAMP_HandleTypeDef *hopamp);
                                  ((GAIN) == OPAMP_PGA_GAIN_32_OR_MINUS_31) || \
                                  ((GAIN) == OPAMP_PGA_GAIN_64_OR_MINUS_63))
 
-#define IS_OPAMP_POWERMODE(POWERMODE) (((POWERMODE) == OPAMP_POWERMODE_NORMAL) || \
+#define IS_OPAMP_POWERMODE(POWERMODE) (((POWERMODE) == OPAMP_POWERMODE_NORMALSPEED) || \
                                        ((POWERMODE) == OPAMP_POWERMODE_HIGHSPEED) )
 
 #define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \
@@ -572,4 +571,3 @@ OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset(OPAMP_HandleTypeDef *hopamp,
 
 #endif /* STM32G4xx_HAL_OPAMP_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_opamp_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -84,4 +83,3 @@ HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPA
 
 #endif /* STM32G4xx_HAL_OPAMP_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_pcd.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -193,13 +192,16 @@ typedef struct
   */
 
 
-#define __HAL_PCD_ENABLE(__HANDLE__)                                  (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_DISABLE(__HANDLE__)                                 (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__)                 ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)               (((__HANDLE__)->Instance->ISTR) &= (uint16_t)(~(__INTERRUPT__)))
+#define __HAL_PCD_ENABLE(__HANDLE__)                              (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__)                             (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__)             ((USB_ReadInterrupts((__HANDLE__)->Instance)\
+                                                                    & (__INTERRUPT__)) == (__INTERRUPT__))
 
-#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT()                             EXTI->IMR1 |= USB_WAKEUP_EXTI_LINE
-#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT()                            EXTI->IMR1 &= ~(USB_WAKEUP_EXTI_LINE)
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)           (((__HANDLE__)->Instance->ISTR)\
+                                                                   &= (uint16_t)(~(__INTERRUPT__)))
+
+#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT()                         EXTI->IMR1 |= USB_WAKEUP_EXTI_LINE
+#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT()                        EXTI->IMR1 &= ~(USB_WAKEUP_EXTI_LINE)
 
 
 /**
@@ -343,13 +345,11 @@ HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr,
 HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr,
                                       uint8_t *pBuf, uint32_t len);
 
-
 HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
 HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
 HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
 HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
 HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
-
 uint32_t          HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
 /**
   * @}
@@ -433,7 +433,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
 #define USB_CNTRX_BLSIZE                      (0x1U << 15)
 
 /* SetENDPOINT */
-#define PCD_SET_ENDPOINT(USBx, bEpNum, wRegValue)  (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)) = (uint16_t)(wRegValue))
+#define PCD_SET_ENDPOINT(USBx, bEpNum, wRegValue)  (*(__IO uint16_t *)\
+                                                    (&(USBx)->EP0R + ((bEpNum) * 2U)) = (uint16_t)(wRegValue))
 
 /* GetENDPOINT */
 #define PCD_GET_ENDPOINT(USBx, bEpNum)             (*(__IO uint16_t *)(&(USBx)->EP0R + ((bEpNum) * 2U)))
@@ -448,7 +449,9 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
   * @param  wType Endpoint Type.
   * @retval None
   */
-#define PCD_SET_EPTYPE(USBx, bEpNum, wType) (PCD_SET_ENDPOINT((USBx), (bEpNum), ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) | USB_EP_CTR_TX | USB_EP_CTR_RX)))
+#define PCD_SET_EPTYPE(USBx, bEpNum, wType) (PCD_SET_ENDPOINT((USBx), (bEpNum), ((PCD_GET_ENDPOINT((USBx), (bEpNum))\
+                                                              & USB_EP_T_MASK) | (wType) | USB_EP_CTR_TX | USB_EP_CTR_RX)))
+
 
 /**
   * @brief  gets the type in the endpoint register(bits EP_TYPE[1:0])
@@ -465,7 +468,7 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
   * @param   bEpNum, bDir
   * @retval None
   */
-#define PCD_FreeUserBuffer(USBx, bEpNum, bDir) \
+#define PCD_FREE_USER_BUFFER(USBx, bEpNum, bDir) \
   do { \
     if ((bDir) == 0U) \
     { \
@@ -633,8 +636,8 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
   * @param  bEpNum Endpoint Number.
   * @retval None
   */
-#define PCD_SET_EP_DBUF(USBx, bEpNum)          PCD_SET_EP_KIND((USBx), (bEpNum))
-#define PCD_CLEAR_EP_DBUF(USBx, bEpNum)        PCD_CLEAR_EP_KIND((USBx), (bEpNum))
+#define PCD_SET_BULK_EP_DBUF(USBx, bEpNum)     PCD_SET_EP_KIND((USBx), (bEpNum))
+#define PCD_CLEAR_BULK_EP_DBUF(USBx, bEpNum)   PCD_CLEAR_EP_KIND((USBx), (bEpNum))
 
 /**
   * @brief  Clears bit CTR_RX / CTR_TX in the endpoint register.
@@ -737,8 +740,12 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
   */
 #define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD))
 
-#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE + ((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U)))
-#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE + ((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U)))
+#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE\
+                                                    + ((uint32_t)(bEpNum) * 8U) + 2U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U)))
+
+#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((((uint32_t)(USBx)->BTABLE\
+                                                    + ((uint32_t)(bEpNum) * 8U) + 6U) * PMA_ACCESS) + ((uint32_t)(USBx) + 0x400U)))
+
 
 /**
   * @brief  sets address of the tx/rx buffer.
@@ -806,18 +813,22 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
 #define PCD_SET_EP_CNT_RX_REG(pdwReg, wCount) \
   do { \
     uint32_t wNBlocks; \
-    if ((wCount) == 0U) \
-    { \
-      *(pdwReg) &= (uint16_t)~USB_CNTRX_NBLK_MSK; \
-      *(pdwReg) |= USB_CNTRX_BLSIZE; \
-    } \
-    else if((wCount) <= 62U) \
+    \
+    if ((wCount) > 62U) \
     { \
-      PCD_CALC_BLK2((pdwReg), (wCount), wNBlocks); \
+      PCD_CALC_BLK32((pdwReg), (wCount), wNBlocks); \
     } \
     else \
     { \
-      PCD_CALC_BLK32((pdwReg), (wCount), wNBlocks); \
+      if ((wCount) == 0U) \
+      { \
+        *(pdwReg) &= (uint16_t)~USB_CNTRX_NBLK_MSK; \
+        *(pdwReg) |= USB_CNTRX_BLSIZE; \
+      } \
+      else \
+      { \
+        PCD_CALC_BLK2((pdwReg), (wCount), wNBlocks); \
+      } \
     } \
   } while(0) /* PCD_SET_EP_CNT_RX_REG */
 
@@ -990,5 +1001,3 @@ PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
 #endif
 
 #endif /* STM32G4xx_HAL_PCD_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_pcd_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -23,7 +22,7 @@
 
 #ifdef __cplusplus
 extern "C" {
-#endif
+#endif /* __cplusplus */
 
 /* Includes ------------------------------------------------------------------*/
 #include "stm32g4xx_hal_def.h"
@@ -83,9 +82,7 @@ void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);
 
 #ifdef __cplusplus
 }
-#endif
+#endif /* __cplusplus */
 
 
 #endif /* STM32G4xx_HAL_PCD_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_pwr.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -410,4 +409,3 @@ void HAL_PWR_PVDCallback(void);
 
 #endif /* STM32G4xx_HAL_PWR_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_pwr_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -816,4 +815,3 @@ void HAL_PWREx_DisableUCPDDeadBattery(void);
 
 #endif /* STM32G4xx_HAL_PWR_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_qspi.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                       opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -742,12 +741,10 @@ HAL_StatusTypeDef     HAL_QSPI_SetFlashID      (QSPI_HandleTypeDef *hqspi, uint3
   * @}
   */
 
-#endif /* defined(QUADSPI) || defined(QUADSPI1) || defined(QUADSPI2) */
+#endif /* defined(QUADSPI) */
 
 #ifdef __cplusplus
 }
 #endif
 
 #endif /* STM32G4xx_HAL_QSPI_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_rcc.h

@@ -6,14 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */
 
@@ -386,7 +384,24 @@ typedef struct
 /** @defgroup RCC_MCO_Index MCO Index
   * @{
   */
-#define RCC_MCO1                       0x00000000U
+/* 32     28      20       16      0
+   --------------------------------
+   | MCO   | GPIO  | GPIO  | GPIO  |
+   | Index |  AF   | Port  |  Pin  |
+   -------------------------------*/
+
+#define RCC_MCO_GPIOPORT_POS           16U
+#define RCC_MCO_GPIOPORT_MASK          (0xFUL << RCC_MCO_GPIOPORT_POS)
+#define RCC_MCO_GPIOAF_POS             20U
+#define RCC_MCO_GPIOAF_MASK            (0xFFUL << RCC_MCO_GPIOAF_POS)
+#define RCC_MCO_INDEX_POS              28U
+#define RCC_MCO_INDEX_MASK             (0x1UL << RCC_MCO_INDEX_POS)
+#define RCC_MCO1_INDEX                 (0x0UL << RCC_MCO_INDEX_POS)             /*!< MCO1 index */
+#define RCC_MCO_PA8                    (RCC_MCO1_INDEX | (GPIO_AF0_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOA) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_8)
+#define RCC_MCO_PG10                   (RCC_MCO1_INDEX | (GPIO_AF0_MCO << RCC_MCO_GPIOAF_POS) | (GPIO_GET_INDEX(GPIOG) << RCC_MCO_GPIOPORT_POS) | GPIO_PIN_10)
+
+/* Legacy Defines*/
+#define RCC_MCO1                       RCC_MCO_PA8
 #define RCC_MCO                        RCC_MCO1               /*!< MCO1 to be compliant with other families with 2 MCOs*/
 /**
   * @}
@@ -3300,7 +3315,8 @@ typedef struct
                                          ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI)    || \
                                          ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV32))
 
-#define IS_RCC_MCO(__MCOX__) ((__MCOX__) == RCC_MCO1)
+#define IS_RCC_MCO(__MCOX__) (((__MCOX__) == RCC_MCO_PA8) || \
+                              ((__MCOX__) == RCC_MCO_PG10))
 
 #define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \
                                        ((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \
@@ -3388,4 +3404,3 @@ void              HAL_RCC_CSSCallback(void);
 
 #endif /* STM32G4xx_HAL_RCC_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_rcc_ex.h

@@ -6,14 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */
 
@@ -1606,4 +1604,3 @@ void              HAL_RCCEx_CRS_ErrorCallback(uint32_t Error);
 
 #endif /* STM32G4xx_HAL_RCC_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_rng.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -22,7 +21,7 @@
 #define STM32G4xx_HAL_RNG_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Includes ------------------------------------------------------------------*/
@@ -81,7 +80,7 @@ typedef enum
 typedef struct  __RNG_HandleTypeDef
 #else
 typedef struct
-#endif /* (USE_HAL_RNG_REGISTER_CALLBACKS) */
+#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
 {
   RNG_TypeDef                 *Instance;    /*!< Register base address   */
 
@@ -91,7 +90,7 @@ typedef struct
 
   __IO HAL_RNG_StateTypeDef   State;        /*!< RNG communication state */
 
-  __IO  uint32_t              ErrorCode;     /*!< RNG Error code               */
+  __IO  uint32_t              ErrorCode;    /*!< RNG Error code          */
 
   uint32_t                    RandomNumber; /*!< Last Generated RNG Data */
 
@@ -171,14 +170,14 @@ typedef  void (*pRNG_ReadyDataCallbackTypeDef)(RNG_HandleTypeDef *hrng, uint32_t
 /** @defgroup RNG_Error_Definition   RNG Error Definition
   * @{
   */
-#define  HAL_RNG_ERROR_NONE             0x00000000U    /*!< No error             */
+#define  HAL_RNG_ERROR_NONE             0x00000000U    /*!< No error          */
 #if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
 #define  HAL_RNG_ERROR_INVALID_CALLBACK 0x00000001U    /*!< Invalid Callback error  */
 #endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
-#define  HAL_RNG_ERROR_TIMEOUT          0x00000002U    /*!< Timeout error        */
+#define  HAL_RNG_ERROR_TIMEOUT          0x00000002U    /*!< Timeout error     */
 #define  HAL_RNG_ERROR_BUSY             0x00000004U    /*!< Busy error        */
 #define  HAL_RNG_ERROR_SEED             0x00000008U    /*!< Seed error        */
-#define  HAL_RNG_ERROR_CLOCK            0x00000010U   /*!< Clock error        */
+#define  HAL_RNG_ERROR_CLOCK            0x00000010U    /*!< Clock error       */
 /**
   * @}
   */
@@ -204,7 +203,7 @@ typedef  void (*pRNG_ReadyDataCallbackTypeDef)(RNG_HandleTypeDef *hrng, uint32_t
                                                     } while(0U)
 #else
 #define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET)
-#endif /*USE_HAL_RNG_REGISTER_CALLBACKS */
+#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
 
 /**
   * @brief  Enables the RNG peripheral.
@@ -299,7 +298,8 @@ void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng);
 
 /* Callbacks Register/UnRegister functions  ***********************************/
 #if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, pRNG_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID,
+                                           pRNG_CallbackTypeDef pCallback);
 HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID);
 
 HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback);
@@ -346,8 +346,8 @@ uint32_t             HAL_RNG_GetError(RNG_HandleTypeDef *hrng);
                        ((IT) == RNG_IT_SEI))
 
 #define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \
-                            ((FLAG) == RNG_FLAG_CECS) || \
-                            ((FLAG) == RNG_FLAG_SECS))
+                           ((FLAG) == RNG_FLAG_CECS) || \
+                           ((FLAG) == RNG_FLAG_SECS))
 
 /**
   * @brief Verify the RNG Clock Error Detection mode.
@@ -377,4 +377,3 @@ uint32_t             HAL_RNG_GetError(RNG_HandleTypeDef *hrng);
 
 #endif /* STM32G4xx_HAL_RNG_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_rtc.h

@@ -6,12 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -545,8 +545,8 @@ typedef  void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to
   */
 #define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__)             \
   do{                                       \
-    RTC->WPR = 0xCAU;   \
-    RTC->WPR = 0x53U;   \
+    (__HANDLE__)->Instance->WPR = 0xCAU;   \
+    (__HANDLE__)->Instance->WPR = 0x53U;   \
   } while(0U)
 
 /**
@@ -556,7 +556,7 @@ typedef  void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to
   */
 #define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__)              \
   do{                                       \
-    RTC->WPR = 0xFFU;   \
+    (__HANDLE__)->Instance->WPR = 0xFFU;   \
   } while(0U)
 
 /**
@@ -573,8 +573,8 @@ typedef  void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to
 #define __HAL_RTC_DAYLIGHT_SAVING_TIME_ADD1H(__HANDLE__, __BKP__)                         \
   do {                                                              \
     __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__);                \
-    SET_BIT(RTC->CR, RTC_CR_ADD1H);            \
-    MODIFY_REG(RTC->CR, RTC_CR_BKP , (__BKP__)); \
+    SET_BIT((__HANDLE__)->Instance->CR, RTC_CR_ADD1H);            \
+    MODIFY_REG((__HANDLE__)->Instance->CR, RTC_CR_BKP , (__BKP__)); \
     __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__);                 \
   } while(0);
 
@@ -592,8 +592,8 @@ typedef  void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to
 #define __HAL_RTC_DAYLIGHT_SAVING_TIME_SUB1H(__HANDLE__, __BKP__)                         \
   do {                                                              \
     __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__);                \
-    SET_BIT(RTC->CR, RTC_CR_SUB1H);            \
-    MODIFY_REG(RTC->CR, RTC_CR_BKP , (__BKP__)); \
+    SET_BIT((__HANDLE__)->Instance->CR, RTC_CR_SUB1H);            \
+    MODIFY_REG((__HANDLE__)->Instance->CR, RTC_CR_BKP , (__BKP__)); \
     __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__);                 \
   } while(0);
 
@@ -602,28 +602,28 @@ typedef  void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__)  (RTC->CR |= (RTC_CR_ALRAE))
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
 
 /**
   * @brief  Disable the RTC ALARMA peripheral.
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__)  (RTC->CR &= ~(RTC_CR_ALRAE))
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
 
 /**
   * @brief  Enable the RTC ALARMB peripheral.
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__)   (RTC->CR |= (RTC_CR_ALRBE))
+#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__)   ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
 
 /**
   * @brief  Disable the RTC ALARMB peripheral.
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__)  (RTC->CR &= ~(RTC_CR_ALRBE))
+#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
 
 /**
   * @brief  Enable the RTC Alarm interrupt.
@@ -634,7 +634,7 @@ typedef  void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to
   *             @arg @ref RTC_IT_ALRB Alarm B interrupt
   * @retval None
   */
-#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__)   (RTC->CR |= (__INTERRUPT__))
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
 
 /**
   * @brief  Disable the RTC Alarm interrupt.
@@ -645,7 +645,7 @@ typedef  void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to
   *            @arg @ref RTC_IT_ALRB Alarm B interrupt
   * @retval None
   */
-#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR &= ~(__INTERRUPT__))
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
 
 /**
   * @brief  Check whether the specified RTC Alarm interrupt has occurred or not.
@@ -656,7 +656,7 @@ typedef  void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to
   *            @arg @ref RTC_IT_ALRB Alarm B interrupt
   * @retval None
   */
-#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) ((((RTC->MISR)& ((__INTERRUPT__)>> 12U)) != 0U) ? 1UL : 0UL)
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->MISR)& ((__INTERRUPT__)>> 12U)) != 0U) ? 1UL : 0UL)
 
 /**
   * @brief  Check whether the specified RTC Alarm interrupt has been enabled or not.
@@ -667,7 +667,7 @@ typedef  void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to
   *            @arg @ref RTC_IT_ALRB Alarm B interrupt
   * @retval None
   */
-#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     ((((RTC->CR) & (__INTERRUPT__)) != 0U) ? 1UL : 0UL)
+#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != 0U) ? 1UL : 0UL)
 
 /**
   * @brief  Get the selected RTC Alarms flag status.
@@ -691,8 +691,8 @@ typedef  void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to
   *             @arg @ref RTC_FLAG_ALRBF
   * @retval None
   */
-#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__)   (((__FLAG__) == RTC_FLAG_ALRAF) ? ((RTC->SCR = (RTC_CLEAR_ALRAF))) : \
-                                                            (RTC->SCR = (RTC_CLEAR_ALRBF)))
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__)   (((__FLAG__) == RTC_FLAG_ALRAF) ? (((__HANDLE__)->Instance->SCR = (RTC_CLEAR_ALRAF))) : \
+                                                            ((__HANDLE__)->Instance->SCR = (RTC_CLEAR_ALRBF)))
 /**
   * @brief  Enable interrupt on the RTC Alarm associated Exti line.
   * @retval None
@@ -1010,6 +1010,3 @@ uint8_t            RTC_Bcd2ToByte(uint8_t Value);
 #endif
 
 #endif /* STM32G4xx_HAL_RTC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-

Inc/stm32g4xx_hal_rtc_ex.h

@@ -6,12 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -552,7 +552,7 @@ with a frequency =  RTCCLK / 256   */
   *            @arg @ref RTC_CLEAR_ALRAF              Clear Alarm A flag
   * @retval None
   */
-#define __HAL_RTC_CLEAR_FLAG(__HANDLE__, __FLAG__)   (RTC->SCR = (__FLAG__))
+#define __HAL_RTC_CLEAR_FLAG(__HANDLE__, __FLAG__)   ((__HANDLE__)->Instance->SCR = (__FLAG__))
 
 
 /** @brief  Check whether the specified RTC flag is set or not.
@@ -587,14 +587,14 @@ with a frequency =  RTCCLK / 256   */
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__)                      (RTC->CR |= (RTC_CR_WUTE))
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__)                      ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
 
 /**
   * @brief  Disable the RTC WakeUp Timer peripheral.
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__)                     (RTC->CR &= ~(RTC_CR_WUTE))
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__)                     ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
 
 /**
   * @brief  Enable the RTC WakeUpTimer interrupt.
@@ -604,7 +604,7 @@ with a frequency =  RTCCLK / 256   */
   *            @arg @ref RTC_IT_WUT WakeUpTimer interrupt
   * @retval None
   */
-#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__)    (RTC->CR |= (__INTERRUPT__))
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
 
 /**
   * @brief  Disable the RTC WakeUpTimer interrupt.
@@ -614,7 +614,7 @@ with a frequency =  RTCCLK / 256   */
   *            @arg @ref RTC_IT_WUT WakeUpTimer interrupt
   * @retval None
   */
-#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__)   (RTC->CR &= ~(__INTERRUPT__))
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
 
 
 /**
@@ -625,7 +625,7 @@ with a frequency =  RTCCLK / 256   */
   *            @arg @ref RTC_IT_WUT  WakeUpTimer interrupt
   * @retval None
   */
-#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__)       ((((RTC->MISR)\
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__)       (((((__HANDLE__)->Instance->MISR)\
                                                                          & ((__INTERRUPT__)>> 12U)) != 0UL) ? 1UL : 0UL)
 /**
   * @brief  Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
@@ -635,7 +635,7 @@ with a frequency =  RTCCLK / 256   */
   *            @arg @ref RTC_IT_WUT  WakeUpTimer interrupt
   * @retval None
   */
-#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)   ((((RTC->CR)\
+#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)   (((((__HANDLE__)->Instance->CR)\
                                                                             & (__INTERRUPT__)) != 0UL) ? 1UL : 0UL)
 
 /**
@@ -722,14 +722,14 @@ with a frequency =  RTCCLK / 256   */
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__)                       (RTC->CR |= (RTC_CR_TSE))
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__)                       ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
 
 /**
   * @brief  Disable the RTC TimeStamp peripheral.
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__)                      (RTC->CR &= ~(RTC_CR_TSE))
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__)                      ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
 
 /**
   * @brief  Enable the RTC TimeStamp interrupt.
@@ -739,7 +739,7 @@ with a frequency =  RTCCLK / 256   */
   *            @arg @ref RTC_IT_TS TimeStamp interrupt
   * @retval None
   */
-#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__)     (RTC->CR |= (__INTERRUPT__))
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__)     ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
 
 /**
   * @brief  Disable the RTC TimeStamp interrupt.
@@ -749,7 +749,7 @@ with a frequency =  RTCCLK / 256   */
   *            @arg @ref RTC_IT_TS TimeStamp interrupt
   * @retval None
   */
-#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__)    (RTC->CR &= ~(__INTERRUPT__))
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
 
 /**
   * @brief  Check whether the specified RTC TimeStamp interrupt has occurred or not.
@@ -759,7 +759,7 @@ with a frequency =  RTCCLK / 256   */
   *            @arg @ref RTC_IT_TS TimeStamp interrupt
   * @retval None
   */
-#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__)        ((((RTC->MISR)\
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__)        (((((__HANDLE__)->Instance->MISR)\
                                                                         & ((__INTERRUPT__)>> 12U)) != 0U) ? 1UL : 0UL)
 /**
   * @brief  Check whether the specified RTC Time Stamp interrupt has been enabled or not.
@@ -769,7 +769,7 @@ with a frequency =  RTCCLK / 256   */
   *            @arg @ref RTC_IT_TS TimeStamp interrupt
   * @retval None
   */
-#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     ((((RTC->CR)\
+#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->CR)\
                                                                             & (__INTERRUPT__)) != 0U) ? 1UL : 0UL)
 
 /**
@@ -850,14 +850,14 @@ with a frequency =  RTCCLK / 256   */
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__)                (RTC->CR |= (RTC_CR_ITSE))
+#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE))
 
 /**
   * @brief  Disable the RTC internal TimeStamp peripheral.
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__)               (RTC->CR &= ~(RTC_CR_ITSE))
+#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__)               ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE))
 
 /**
   * @brief  Get the selected RTC Internal Time Stamps flag status.
@@ -884,28 +884,28 @@ with a frequency =  RTCCLK / 256   */
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_TAMPTS_ENABLE(__HANDLE__)                       (RTC->CR |= (RTC_CR_TAMPTS))
+#define __HAL_RTC_TAMPTS_ENABLE(__HANDLE__)                       ((__HANDLE__)->Instance->CR |= (RTC_CR_TAMPTS))
 
 /**
   * @brief  Disable the RTC TimeStamp on Tamper detection.
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_TAMPTS_DISABLE(__HANDLE__)                      (RTC->CR &= ~(RTC_CR_TAMPTS))
+#define __HAL_RTC_TAMPTS_DISABLE(__HANDLE__)                      ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TAMPTS))
 
 /**
   * @brief  Enable the RTC Tamper detection output.
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_TAMPOE_ENABLE(__HANDLE__)                       (RTC->CR |= (RTC_CR_TAMPOE))
+#define __HAL_RTC_TAMPOE_ENABLE(__HANDLE__)                       ((__HANDLE__)->Instance->CR |= (RTC_CR_TAMPOE))
 
 /**
   * @brief  Disable the RTC Tamper detection output.
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_TAMPOE_DISABLE(__HANDLE__)                      (RTC->CR &= ~(RTC_CR_TAMPOE))
+#define __HAL_RTC_TAMPOE_DISABLE(__HANDLE__)                      ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TAMPOE))
 
 
 /**
@@ -923,14 +923,14 @@ with a frequency =  RTCCLK / 256   */
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__)               (RTC->CR |= (RTC_CR_COE))
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__)               ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
 
 /**
   * @brief  Disable the calibration output.
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__)              (RTC->CR &= ~(RTC_CR_COE))
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__)              ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
 
 
 /**
@@ -938,14 +938,14 @@ with a frequency =  RTCCLK / 256   */
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__)               (RTC->CR |= (RTC_CR_REFCKON))
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__)               ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
 
 /**
   * @brief  Disable the clock reference detection.
   * @param  __HANDLE__ specifies the RTC handle.
   * @retval None
   */
-#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__)              (RTC->CR &= ~(RTC_CR_REFCKON))
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__)              ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
 
 
 /**
@@ -1381,5 +1381,3 @@ uint32_t          HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupReg
 #endif
 
 #endif /* STM32G4xx_HAL_RTC_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_sai.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -962,4 +961,3 @@ uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai);
 
 #endif /* STM32G4xx_HAL_SAI_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_sai_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -102,4 +101,3 @@ HAL_StatusTypeDef HAL_SAIEx_ConfigPdmMicDelay(SAI_HandleTypeDef *hsai, SAIEx_Pdm
 
 #endif /* STM32G4xx_HAL_SAI_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_smartcard.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -202,7 +201,7 @@ typedef struct __SMARTCARD_HandleTypeDef
 
   SMARTCARD_AdvFeatureInitTypeDef   AdvancedInit;          /*!< SmartCard advanced features initialization parameters */
 
-  uint8_t                           *pTxBuffPtr;           /*!< Pointer to SmartCard Tx transfer Buffer               */
+  const uint8_t                     *pTxBuffPtr;           /*!< Pointer to SmartCard Tx transfer Buffer               */
 
   uint16_t                          TxXferSize;            /*!< SmartCard Tx Transfer size                            */
 
@@ -1153,13 +1152,13 @@ HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsma
   * @{
   */
 
-HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size,
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size,
                                          uint32_t Timeout);
 HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size,
                                         uint32_t Timeout);
-HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
 /* Transfer Abort functions */
 HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard);
@@ -1211,4 +1210,3 @@ uint32_t                   HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmar
 
 #endif /* STM32G4xx_HAL_SMARTCARD_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_smartcard_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -335,4 +334,3 @@ HAL_StatusTypeDef HAL_SMARTCARDEx_SetRxFifoThreshold(SMARTCARD_HandleTypeDef *hs
 
 #endif /* STM32G4xx_HAL_SMARTCARD_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_smbus.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -27,7 +26,6 @@ extern "C" {
 
 /* Includes ------------------------------------------------------------------*/
 #include "stm32g4xx_hal_def.h"
-#include "stm32g4xx_hal_smbus_ex.h"
 
 /** @addtogroup STM32G4xx_HAL_Driver
   * @{
@@ -49,42 +47,43 @@ extern "C" {
 typedef struct
 {
   uint32_t Timing;                 /*!< Specifies the SMBUS_TIMINGR_register value.
-                                     This parameter calculated by referring to SMBUS initialization
-                                            section in Reference manual */
+                                        This parameter calculated by referring to SMBUS initialization section
+                                        in Reference manual */
   uint32_t AnalogFilter;           /*!< Specifies if Analog Filter is enable or not.
-                                     This parameter can be a value of @ref SMBUS_Analog_Filter */
+                                        This parameter can be a value of @ref SMBUS_Analog_Filter */
 
   uint32_t OwnAddress1;            /*!< Specifies the first device own address.
-                                     This parameter can be a 7-bit or 10-bit address. */
+                                        This parameter can be a 7-bit or 10-bit address. */
 
   uint32_t AddressingMode;         /*!< Specifies if 7-bit or 10-bit addressing mode for master is selected.
-                                     This parameter can be a value of @ref SMBUS_addressing_mode */
+                                        This parameter can be a value of @ref SMBUS_addressing_mode */
 
   uint32_t DualAddressMode;        /*!< Specifies if dual addressing mode is selected.
-                                     This parameter can be a value of @ref SMBUS_dual_addressing_mode */
+                                        This parameter can be a value of @ref SMBUS_dual_addressing_mode */
 
   uint32_t OwnAddress2;            /*!< Specifies the second device own address if dual addressing mode is selected
-                                     This parameter can be a 7-bit address. */
+                                        This parameter can be a 7-bit address. */
 
-  uint32_t OwnAddress2Masks;       /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
-                                     This parameter can be a value of @ref SMBUS_own_address2_masks. */
+  uint32_t OwnAddress2Masks;       /*!< Specifies the acknowledge mask address second device own address
+                                        if dual addressing mode is selected
+                                        This parameter can be a value of @ref SMBUS_own_address2_masks. */
 
   uint32_t GeneralCallMode;        /*!< Specifies if general call mode is selected.
-                                     This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */
+                                        This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */
 
   uint32_t NoStretchMode;          /*!< Specifies if nostretch mode is selected.
-                                     This parameter can be a value of @ref SMBUS_nostretch_mode */
+                                        This parameter can be a value of @ref SMBUS_nostretch_mode */
 
   uint32_t PacketErrorCheckMode;   /*!< Specifies if Packet Error Check mode is selected.
-                                     This parameter can be a value of @ref SMBUS_packet_error_check_mode */
+                                        This parameter can be a value of @ref SMBUS_packet_error_check_mode */
 
   uint32_t PeripheralMode;         /*!< Specifies which mode of Periphal is selected.
-                                     This parameter can be a value of @ref SMBUS_peripheral_mode */
+                                        This parameter can be a value of @ref SMBUS_peripheral_mode */
 
   uint32_t SMBusTimeout;           /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value.
-                                      (Enable bits and different timeout values)
-                                     This parameter calculated by referring to SMBUS initialization
-                                         section in Reference manual */
+                                        (Enable bits and different timeout values)
+                                        This parameter calculated by referring to SMBUS initialization section
+                                        in Reference manual */
 } SMBUS_InitTypeDef;
 /**
   * @}
@@ -103,7 +102,7 @@ typedef struct
 #define HAL_SMBUS_STATE_SLAVE_BUSY_RX   (0x00000042U)  /*!< Slave Data Reception process is ongoing       */
 #define HAL_SMBUS_STATE_TIMEOUT         (0x00000003U)  /*!< Timeout state                                 */
 #define HAL_SMBUS_STATE_ERROR           (0x00000004U)  /*!< Reception process is ongoing                  */
-#define HAL_SMBUS_STATE_LISTEN          (0x00000008U)   /*!< Address Listen Mode is ongoing                */
+#define HAL_SMBUS_STATE_LISTEN          (0x00000008U)  /*!< Address Listen Mode is ongoing                */
 /**
   * @}
   */
@@ -122,7 +121,7 @@ typedef struct
 #define HAL_SMBUS_ERROR_ALERT           (0x00000040U)    /*!< Alert error          */
 #define HAL_SMBUS_ERROR_PECERR          (0x00000080U)    /*!< PEC error            */
 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
-#define HAL_SMBUS_ERROR_INVALID_CALLBACK  (0x00000100U)    /*!< Invalid Callback error */
+#define HAL_SMBUS_ERROR_INVALID_CALLBACK  (0x00000100U)  /*!< Invalid Callback error   */
 #endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
 #define HAL_SMBUS_ERROR_INVALID_PARAM    (0x00000200U)   /*!< Invalid Parameters error */
 /**
@@ -160,17 +159,26 @@ typedef struct
   __IO uint32_t                ErrorCode;       /*!< SMBUS Error code                   */
 
 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
-  void (* MasterTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);           /*!< SMBUS Master Tx Transfer completed callback */
-  void (* MasterRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);           /*!< SMBUS Master Rx Transfer completed callback */
-  void (* SlaveTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);            /*!< SMBUS Slave Tx Transfer completed callback  */
-  void (* SlaveRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);            /*!< SMBUS Slave Rx Transfer completed callback  */
-  void (* ListenCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);             /*!< SMBUS Listen Complete callback              */
-  void (* ErrorCallback)(struct __SMBUS_HandleTypeDef *hsmbus);                  /*!< SMBUS Error callback                        */
-
-  void (* AddrCallback)(struct __SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode);  /*!< SMBUS Slave Address Match callback */
-
-  void (* MspInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus);                /*!< SMBUS Msp Init callback                     */
-  void (* MspDeInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus);              /*!< SMBUS Msp DeInit callback                   */
+  void (* MasterTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+  /*!< SMBUS Master Tx Transfer completed callback */
+  void (* MasterRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+  /*!< SMBUS Master Rx Transfer completed callback */
+  void (* SlaveTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+  /*!< SMBUS Slave Tx Transfer completed callback  */
+  void (* SlaveRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+  /*!< SMBUS Slave Rx Transfer completed callback  */
+  void (* ListenCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+  /*!< SMBUS Listen Complete callback              */
+  void (* ErrorCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+  /*!< SMBUS Error callback                        */
+
+  void (* AddrCallback)(struct __SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode);
+  /*!< SMBUS Slave Address Match callback */
+
+  void (* MspInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+  /*!< SMBUS Msp Init callback                     */
+  void (* MspDeInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+  /*!< SMBUS Msp DeInit callback                   */
 
 #endif  /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
 } SMBUS_HandleTypeDef;
@@ -196,8 +204,11 @@ typedef enum
 /**
   * @brief  HAL SMBUS Callback pointer definition
   */
-typedef  void (*pSMBUS_CallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus); /*!< pointer to an SMBUS callback function */
-typedef  void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an SMBUS Address Match callback function */
+typedef  void (*pSMBUS_CallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus);
+/*!< pointer to an SMBUS callback function */
+typedef  void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection,
+                                            uint16_t AddrMatchCode);
+/*!< pointer to an SMBUS Address Match callback function */
 
 #endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
 /**
@@ -359,9 +370,10 @@ typedef  void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t
 #define SMBUS_IT_ADDRI                          I2C_CR1_ADDRIE
 #define SMBUS_IT_RXI                            I2C_CR1_RXIE
 #define SMBUS_IT_TXI                            I2C_CR1_TXIE
-#define SMBUS_IT_TX                             (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | \
-                                                 SMBUS_IT_TXI)
-#define SMBUS_IT_RX                             (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | SMBUS_IT_RXI)
+#define SMBUS_IT_TX                             (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | \
+                                                 SMBUS_IT_NACKI | SMBUS_IT_TXI)
+#define SMBUS_IT_RX                             (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | \
+                                                 SMBUS_IT_RXI)
 #define SMBUS_IT_ALERT                          (SMBUS_IT_ERRI)
 #define SMBUS_IT_ADDR                           (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI)
 /**
@@ -409,14 +421,14 @@ typedef  void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t
   * @retval None
   */
 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
-#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__)           do{                                                   \
-                                                                 (__HANDLE__)->State = HAL_SMBUS_STATE_RESET;       \
+#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__)           do{                                               \
+                                                                 (__HANDLE__)->State = HAL_SMBUS_STATE_RESET;  \
                                                                  (__HANDLE__)->MspInitCallback = NULL;            \
                                                                  (__HANDLE__)->MspDeInitCallback = NULL;          \
                                                                } while(0)
 #else
 #define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__)         ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET)
-#endif
+#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
 
 /** @brief  Enable the specified SMBUS interrupts.
   * @param  __HANDLE__ specifies the SMBUS Handle.
@@ -492,12 +504,14 @@ typedef  void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t
   */
 #define SMBUS_FLAG_MASK  (0x0001FFFFU)
 #define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) \
-  (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET)
+  (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == \
+    ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET)
 
 /** @brief  Clear the SMBUS pending flags which are cleared by writing 1 in a specific bit.
   * @param  __HANDLE__ specifies the SMBUS Handle.
   * @param  __FLAG__ specifies the flag to clear.
   *          This parameter can be any combination of the following values:
+  *            @arg @ref SMBUS_FLAG_TXE     Transmit data register empty
   *            @arg @ref SMBUS_FLAG_ADDR    Address matched (slave mode)
   *            @arg @ref SMBUS_FLAG_AF      NACK received flag
   *            @arg @ref SMBUS_FLAG_STOPF   STOP detection flag
@@ -510,7 +524,9 @@ typedef  void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t
   *
   * @retval None
   */
-#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__)  (((__FLAG__) == SMBUS_FLAG_TXE) ? \
+                                                       ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \
+                                                       ((__HANDLE__)->Instance->ICR = (__FLAG__)))
 
 /** @brief  Enable the specified SMBUS peripheral.
   * @param  __HANDLE__ specifies the SMBUS Handle.
@@ -575,43 +591,52 @@ typedef  void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t
                                                          ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE)  || \
                                                          ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))
 
-#define IS_SMBUS_TRANSFER_MODE(MODE)                    (((MODE) == SMBUS_RELOAD_MODE)                          || \
-                                                         ((MODE) == SMBUS_AUTOEND_MODE)                         || \
-                                                         ((MODE) == SMBUS_SOFTEND_MODE)                         || \
-                                                         ((MODE) == SMBUS_SENDPEC_MODE)                         || \
-                                                         ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE))   || \
-                                                         ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))  || \
-                                                         ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE))   || \
-                                                         ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | SMBUS_RELOAD_MODE )))
+#define IS_SMBUS_TRANSFER_MODE(MODE)                 (((MODE) == SMBUS_RELOAD_MODE)                          || \
+                                                      ((MODE) == SMBUS_AUTOEND_MODE)                         || \
+                                                      ((MODE) == SMBUS_SOFTEND_MODE)                         || \
+                                                      ((MODE) == SMBUS_SENDPEC_MODE)                         || \
+                                                      ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE))   || \
+                                                      ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))  || \
+                                                      ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE))   || \
+                                                      ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | \
+                                                                  SMBUS_RELOAD_MODE )))
 
 
 #define IS_SMBUS_TRANSFER_REQUEST(REQUEST)              (((REQUEST) == SMBUS_GENERATE_STOP)              || \
-                                                         ((REQUEST) == SMBUS_GENERATE_START_READ)       || \
-                                                         ((REQUEST) == SMBUS_GENERATE_START_WRITE)      || \
+                                                         ((REQUEST) == SMBUS_GENERATE_START_READ)        || \
+                                                         ((REQUEST) == SMBUS_GENERATE_START_WRITE)       || \
                                                          ((REQUEST) == SMBUS_NO_STARTSTOP))
 
 
-#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST)      (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)       || \
-                                                         ((REQUEST) == SMBUS_FIRST_FRAME)                       || \
-                                                         ((REQUEST) == SMBUS_NEXT_FRAME)                        || \
-                                                         ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC)       || \
-                                                         ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC)                 || \
-                                                         ((REQUEST) == SMBUS_FIRST_FRAME_WITH_PEC)              || \
-                                                         ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC)     || \
-                                                         ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC))
+#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST)   (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)       || \
+                                                      ((REQUEST) == SMBUS_FIRST_FRAME)                       || \
+                                                      ((REQUEST) == SMBUS_NEXT_FRAME)                        || \
+                                                      ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC)       || \
+                                                      ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC)                 || \
+                                                      ((REQUEST) == SMBUS_FIRST_FRAME_WITH_PEC)              || \
+                                                      ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC)     || \
+                                                      ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC))
 
-#define IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_OTHER_FRAME_NO_PEC)                || \
-                                                          ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC)       || \
-                                                          ((REQUEST) == SMBUS_OTHER_FRAME_WITH_PEC)              || \
+#define IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_OTHER_FRAME_NO_PEC)             || \
+                                                          ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC)    || \
+                                                          ((REQUEST) == SMBUS_OTHER_FRAME_WITH_PEC)           || \
                                                           ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC))
 
-#define SMBUS_RESET_CR1(__HANDLE__)                       ((__HANDLE__)->Instance->CR1 &= \
-                                                           (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | I2C_CR1_PECEN)))
-#define SMBUS_RESET_CR2(__HANDLE__)                       ((__HANDLE__)->Instance->CR2 &= \
-                                                           (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
-
-#define SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__)     (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
-                                                           (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+#define SMBUS_RESET_CR1(__HANDLE__)                    ((__HANDLE__)->Instance->CR1 &= \
+                                                        (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | \
+                                                                               I2C_CR1_PECEN)))
+#define SMBUS_RESET_CR2(__HANDLE__)                    ((__HANDLE__)->Instance->CR2 &= \
+                                                        (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \
+                                                                               I2C_CR2_NBYTES | I2C_CR2_RELOAD | \
+                                                                               I2C_CR2_RD_WRN)))
+
+#define SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__)     (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? \
+                                                           (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \
+                                                                       (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \
+                                                                      (~I2C_CR2_RD_WRN)) : \
+                                                           (uint32_t)((((uint32_t)(__ADDRESS__) & \
+                                                                        (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | \
+                                                                       (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
 
 #define SMBUS_GET_ADDR_MATCH(__HANDLE__)                  (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17U)
 #define SMBUS_GET_DIR(__HANDLE__)                         (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)
@@ -630,6 +655,9 @@ typedef  void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t
   * @}
   */
 
+/* Include SMBUS HAL Extended module */
+#include "stm32g4xx_hal_smbus_ex.h"
+
 /* Exported functions --------------------------------------------------------*/
 /** @addtogroup SMBUS_Exported_Functions SMBUS Exported Functions
   * @{
@@ -649,11 +677,14 @@ HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter(SMBUS_HandleTypeDef *hsmbus, uin
 
 /* Callbacks Register/UnRegister functions  ***********************************/
 #if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID,
+HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus,
+                                             HAL_SMBUS_CallbackIDTypeDef CallbackID,
                                              pSMBUS_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID);
+HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus,
+                                               HAL_SMBUS_CallbackIDTypeDef CallbackID);
 
-HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, pSMBUS_AddrCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus,
+                                                 pSMBUS_AddrCallbackTypeDef pCallback);
 HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus);
 #endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
 /**
@@ -679,10 +710,10 @@ HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t
   * @{
   */
 /******* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData,
-                                               uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData,
-                                              uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress,
+                                               uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress,
+                                              uint8_t *pData, uint16_t Size, uint32_t XferOptions);
 HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress);
 HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size,
                                               uint32_t XferOptions);
@@ -758,5 +789,3 @@ uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
 
 
 #endif /* STM32G4xx_HAL_SMBUS_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_smbus_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -37,7 +36,6 @@ extern "C" {
   */
 
 /* Exported types ------------------------------------------------------------*/
-
 /* Exported constants --------------------------------------------------------*/
 /** @defgroup SMBUSEx_Exported_Constants SMBUS Extended Exported Constants
   * @{
@@ -58,7 +56,7 @@ extern "C" {
 #define SMBUS_FASTMODEPLUS_I2C4           SYSCFG_CFGR1_I2C4_FMP                           /*!< Enable Fast Mode Plus on I2C4 pins */
 #else
 #define SMBUS_FASTMODEPLUS_I2C4           (uint32_t)(0x00000800U | SMBUS_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C4 not supported  */
-#endif
+#endif /* SYSCFG_CFGR1_I2C4_FMP */
 /**
   * @}
   */
@@ -81,7 +79,17 @@ extern "C" {
   * @{
   */
 
-/** @addtogroup SMBUSEx_Exported_Functions_Group3 SMBUS Extended FastModePlus Functions
+/** @addtogroup SMBUSEx_Exported_Functions_Group2 WakeUp Mode Functions
+  * @{
+  */
+/* Peripheral Control functions  ************************************************/
+HAL_StatusTypeDef HAL_SMBUSEx_EnableWakeUp(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUSEx_DisableWakeUp(SMBUS_HandleTypeDef *hsmbus);
+/**
+  * @}
+  */
+
+/** @addtogroup SMBUSEx_Exported_Functions_Group3 Fast Mode Plus Functions
   * @{
   */
 void HAL_SMBUSEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
@@ -108,13 +116,13 @@ void HAL_SMBUSEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
   * @{
   */
 #define IS_SMBUS_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & SMBUS_FMP_NOT_SUPPORTED) != SMBUS_FMP_NOT_SUPPORTED) && \
-                                           ((((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB6))  == SMBUS_FASTMODEPLUS_PB6)     || \
-                                            (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB7))  == SMBUS_FASTMODEPLUS_PB7)     || \
-                                            (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB8))  == SMBUS_FASTMODEPLUS_PB8)     || \
-                                            (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB9))  == SMBUS_FASTMODEPLUS_PB9)     || \
-                                            (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C1)) == SMBUS_FASTMODEPLUS_I2C1)    || \
-                                            (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C2)) == SMBUS_FASTMODEPLUS_I2C2)    || \
-                                            (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C3)) == SMBUS_FASTMODEPLUS_I2C3)    || \
+                                           ((((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB6))  == SMBUS_FASTMODEPLUS_PB6)  || \
+                                            (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB7))  == SMBUS_FASTMODEPLUS_PB7)  || \
+                                            (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB8))  == SMBUS_FASTMODEPLUS_PB8)  || \
+                                            (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB9))  == SMBUS_FASTMODEPLUS_PB9)  || \
+                                            (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C1)) == SMBUS_FASTMODEPLUS_I2C1) || \
+                                            (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C2)) == SMBUS_FASTMODEPLUS_I2C2) || \
+                                            (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C3)) == SMBUS_FASTMODEPLUS_I2C3) || \
                                             (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C4)) == SMBUS_FASTMODEPLUS_I2C4)))
 /**
   * @}
@@ -142,5 +150,3 @@ void HAL_SMBUSEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
 #endif
 
 #endif /* STM32G4xx_HAL_SMBUS_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_spi.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -778,7 +777,8 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
 
 /* Callbacks Register/UnRegister functions  ***********************************/
 #if (USE_HAL_SPI_REGISTER_CALLBACKS == 1U)
-HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID, pSPI_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_SPI_RegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID,
+                                           pSPI_CallbackTypeDef pCallback);
 HAL_StatusTypeDef HAL_SPI_UnRegisterCallback(SPI_HandleTypeDef *hspi, HAL_SPI_CallbackIDTypeDef CallbackID);
 #endif /* USE_HAL_SPI_REGISTER_CALLBACKS */
 /**
@@ -849,4 +849,3 @@ uint32_t             HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
 
 #endif /* STM32G4xx_HAL_SPI_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_spi_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -72,4 +71,3 @@ HAL_StatusTypeDef HAL_SPIEx_FlushRxFifo(SPI_HandleTypeDef *hspi);
 
 #endif /* STM32G4xx_HAL_SPI_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_sram.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                       opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -231,5 +230,3 @@ HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram);
 #endif
 
 #endif /* STM32G4xx_HAL_SRAM_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_tim.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -55,9 +54,10 @@ typedef struct
 
   uint32_t Period;            /*!< Specifies the period value to be loaded into the active
                                    Auto-Reload Register at the next update event.
-                                   This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF (or 0xFFEF if dithering is activated)
-                                   Macros __HAL_TIM_CALC_PERIOD(), __HAL_TIM_CALC_PERIOD_DITHER(), __HAL_TIM_CALC_PERIOD_BY_DELAY(), __HAL_TIM_CALC_PERIOD_DITHER_BY_DELAY()
-                                   can be used to calculate Period value */
+                                   This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF
+                                   (or 0xFFEF if dithering is activated)Macros __HAL_TIM_CALC_PERIOD(),
+                                    __HAL_TIM_CALC_PERIOD_DITHER(),__HAL_TIM_CALC_PERIOD_BY_DELAY(),
+                                    __HAL_TIM_CALC_PERIOD_DITHER_BY_DELAY()can be used to calculate Period value */
 
   uint32_t ClockDivision;     /*!< Specifies the clock division.
                                    This parameter can be a value of @ref TIM_ClockDivision */
@@ -68,8 +68,10 @@ typedef struct
                                     This means in PWM mode that (N+1) corresponds to:
                                         - the number of PWM periods in edge-aligned mode
                                         - the number of half PWM period in center-aligned mode
-                                     GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
-                                     Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+                                     GP timers: this parameter must be a number between Min_Data = 0x00 and
+                                     Max_Data = 0xFF.
+                                     Advanced timers: this parameter must be a number between Min_Data = 0x0000 and
+                                     Max_Data = 0xFFFF. */
 
   uint32_t AutoReloadPreload;  /*!< Specifies the auto-reload preload.
                                    This parameter can be a value of @ref TIM_AutoReloadPreload */
@@ -84,9 +86,10 @@ typedef struct
                                This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
 
   uint32_t Pulse;         /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
-                               This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF (or 0xFFEF if dithering is activated)
-                               Macros __HAL_TIM_CALC_PULSE(), __HAL_TIM_CALC_PULSE_DITHER()
-                               can be used to calculate Pulse value */
+                               This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF
+                               (or 0xFFEF if dithering is activated)
+                               Macros __HAL_TIM_CALC_PULSE(), __HAL_TIM_CALC_PULSE_DITHER() can be used to calculate
+                               Pulse value */
 
   uint32_t OCPolarity;    /*!< Specifies the output polarity.
                                This parameter can be a value of @ref TIM_Output_Compare_Polarity */
@@ -118,9 +121,10 @@ typedef struct
                                This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
 
   uint32_t Pulse;         /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
-                               This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF (or 0xFFEF if dithering is activated)
-                               Macros __HAL_TIM_CALC_PULSE(), __HAL_TIM_CALC_PULSE_DITHER()
-                               can be used to calculate Pulse value */
+                               This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF
+                               (or 0xFFEF if dithering is activated)
+                               Macros __HAL_TIM_CALC_PULSE(), __HAL_TIM_CALC_PULSE_DITHER() can be used to calculate
+                               Pulse value */
 
   uint32_t OCPolarity;    /*!< Specifies the output polarity.
                                This parameter can be a value of @ref TIM_Output_Compare_Polarity */
@@ -225,7 +229,8 @@ typedef struct
   uint32_t ClearInputPolarity;   /*!< TIM Clear Input polarity
                                       This parameter can be a value of @ref TIM_ClearInput_Polarity */
   uint32_t ClearInputPrescaler;  /*!< TIM Clear Input prescaler
-                                      This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */
+                                      This parameter must be 0: When OCRef clear feature is used with ETR source,
+                                      ETR prescaler must be off */
   uint32_t ClearInputFilter;     /*!< TIM Clear Input filter
                                       This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
 } TIM_ClearInputConfigTypeDef;
@@ -275,32 +280,32 @@ typedef struct
   */
 typedef struct
 {
-  uint32_t OffStateRunMode;      /*!< TIM off state in run mode
-                                      This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
-  uint32_t OffStateIDLEMode;     /*!< TIM off state in IDLE mode
-                                      This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
-  uint32_t LockLevel;            /*!< TIM Lock level
-                                      This parameter can be a value of @ref TIM_Lock_level */
-  uint32_t DeadTime;             /*!< TIM dead Time
-                                      This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
-  uint32_t BreakState;           /*!< TIM Break State
-                                      This parameter can be a value of @ref TIM_Break_Input_enable_disable */
-  uint32_t BreakPolarity;        /*!< TIM Break input polarity
-                                      This parameter can be a value of @ref TIM_Break_Polarity */
-  uint32_t BreakFilter;          /*!< Specifies the break input filter.
-                                      This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-  uint32_t BreakAFMode;          /*!< Specifies the alternate function mode of the break input.
-                                      This parameter can be a value of @ref TIM_Break_Input_AF_Mode */
-  uint32_t Break2State;          /*!< TIM Break2 State
-                                      This parameter can be a value of @ref TIM_Break2_Input_enable_disable */
-  uint32_t Break2Polarity;       /*!< TIM Break2 input polarity
-                                      This parameter can be a value of @ref TIM_Break2_Polarity */
-  uint32_t Break2Filter;         /*!< TIM break2 input filter.
-                                      This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-  uint32_t Break2AFMode;         /*!< Specifies the alternate function mode of the break2 input.
-                                      This parameter can be a value of @ref TIM_Break2_Input_AF_Mode */
-  uint32_t AutomaticOutput;      /*!< TIM Automatic Output Enable state
-                                      This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+  uint32_t OffStateRunMode;      /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+
+  uint32_t OffStateIDLEMode;     /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+
+  uint32_t LockLevel;            /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */
+
+  uint32_t DeadTime;             /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+
+  uint32_t BreakState;           /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+
+  uint32_t BreakPolarity;        /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */
+
+  uint32_t BreakFilter;          /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+  uint32_t BreakAFMode;          /*!< Specifies the alternate function mode of the break input.This parameter can be a value of @ref TIM_Break_Input_AF_Mode */
+
+  uint32_t Break2State;          /*!< TIM Break2 State, This parameter can be a value of @ref TIM_Break2_Input_enable_disable */
+
+  uint32_t Break2Polarity;       /*!< TIM Break2 input polarity, This parameter can be a value of @ref TIM_Break2_Polarity */
+
+  uint32_t Break2Filter;         /*!< TIM break2 input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+  uint32_t Break2AFMode;         /*!< Specifies the alternate function mode of the break2 input.This parameter can be a value of @ref TIM_Break2_Input_AF_Mode */
+
+  uint32_t AutomaticOutput;      /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+
 } TIM_BreakDeadTimeConfigTypeDef;
 
 /**
@@ -691,10 +696,8 @@ typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim);  /*!< pointer to
 /** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
   * @{
   */
-#define TIM_ICSELECTION_DIRECTTI           TIM_CCMR1_CC1S_0                     /*!< TIM Input 1, 2, 3 or 4 is selected to be
-                                                                                     connected to IC1, IC2, IC3 or IC4, respectively */
-#define TIM_ICSELECTION_INDIRECTTI         TIM_CCMR1_CC1S_1                     /*!< TIM Input 1, 2, 3 or 4 is selected to be
-                                                                                     connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_DIRECTTI           TIM_CCMR1_CC1S_0                     /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI         TIM_CCMR1_CC1S_1                     /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */
 #define TIM_ICSELECTION_TRC                TIM_CCMR1_CC1S                       /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
 /**
   * @}
@@ -977,19 +980,18 @@ typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim);  /*!< pointer to
   * @{
   */
 #define TIM_AUTOMATICOUTPUT_DISABLE        0x00000000U                          /*!< MOE can be set only by software */
-#define TIM_AUTOMATICOUTPUT_ENABLE         TIM_BDTR_AOE                         /*!< MOE can be set by software or automatically at the next update event
-                                                                                    (if none of the break inputs BRK and BRK2 is active) */
+#define TIM_AUTOMATICOUTPUT_ENABLE         TIM_BDTR_AOE                         /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */
 /**
   * @}
   */
 
-/** @defgroup TIM_Group_Channel5 Group Channel 5 and Channel 1, 2 or 3
+/** @defgroup TIM_Group_Channel5 TIM Group Channel 5 and Channel 1, 2 or 3
   * @{
   */
-#define TIM_GROUPCH5_NONE                  0x00000000U                          /* !< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
-#define TIM_GROUPCH5_OC1REFC               TIM_CCR5_GC5C1                       /* !< OC1REFC is the logical AND of OC1REFC and OC5REF    */
-#define TIM_GROUPCH5_OC2REFC               TIM_CCR5_GC5C2                       /* !< OC2REFC is the logical AND of OC2REFC and OC5REF    */
-#define TIM_GROUPCH5_OC3REFC               TIM_CCR5_GC5C3                       /* !< OC3REFC is the logical AND of OC3REFC and OC5REF    */
+#define TIM_GROUPCH5_NONE                  0x00000000U                          /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
+#define TIM_GROUPCH5_OC1REFC               TIM_CCR5_GC5C1                       /*!< OC1REFC is the logical AND of OC1REFC and OC5REF    */
+#define TIM_GROUPCH5_OC2REFC               TIM_CCR5_GC5C2                       /*!< OC2REFC is the logical AND of OC2REFC and OC5REF    */
+#define TIM_GROUPCH5_OC3REFC               TIM_CCR5_GC5C3                       /*!< OC3REFC is the logical AND of OC3REFC and OC5REF    */
 /**
   * @}
   */
@@ -1302,7 +1304,8 @@ typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim);  /*!< pointer to
   * @brief  Disable the TIM main Output.
   * @param  __HANDLE__ TIM handle
   * @retval None
-  * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled
+  * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been
+  *       disabled
   */
 #define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
   do { \
@@ -1493,7 +1496,8 @@ typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim);  /*!< pointer to
 
 /**
   * @brief  Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31).
-  * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read in an atomic way.
+  * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read
+  *       in an atomic way.
   * @param  __HANDLE__ TIM handle.
   * @retval None
 mode.
@@ -1520,8 +1524,8 @@ mode.
   * @brief  Indicates whether or not the TIM Counter is used as downcounter.
   * @param  __HANDLE__ TIM handle.
   * @retval False (Counter used as upcounter) or True (Counter used as downcounter)
-  * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder
-mode.
+  * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode
+  *       or Encoder mode.
   */
 #define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__)    (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
 
@@ -1535,7 +1539,8 @@ mode.
 
 /**
   * @brief  Set the TIM Counter Register value on runtime.
-  * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in case of 32 bits counter TIM instance.
+  * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in
+  *      case of 32 bits counter TIM instance.
   *      Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros.
   * @param  __HANDLE__ TIM handle.
   * @param  __COUNTER__ specifies the Counter register new value.
@@ -1597,7 +1602,8 @@ mode.
 #define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__)  ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
 
 /**
-  * @brief  Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function.
+  * @brief  Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel()
+  *         function.
   * @param  __HANDLE__ TIM handle.
   * @param  __CHANNEL__ TIM Channels to be configured.
   *          This parameter can be one of the following values:
@@ -2309,13 +2315,19 @@ mode.
    ((__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__)))
 
 #define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__,  __CHANNEL_STATE__) do { \
-  (__HANDLE__)->ChannelState[0]  = (__CHANNEL_STATE__);  \
-  (__HANDLE__)->ChannelState[1]  = (__CHANNEL_STATE__);  \
-  (__HANDLE__)->ChannelState[2]  = (__CHANNEL_STATE__);  \
-  (__HANDLE__)->ChannelState[3]  = (__CHANNEL_STATE__);  \
-  (__HANDLE__)->ChannelState[4]  = (__CHANNEL_STATE__);  \
-  (__HANDLE__)->ChannelState[5]  = (__CHANNEL_STATE__);  \
- } while(0)
+                                                                       (__HANDLE__)->ChannelState[0]  = \
+                                                                       (__CHANNEL_STATE__);  \
+                                                                       (__HANDLE__)->ChannelState[1]  = \
+                                                                       (__CHANNEL_STATE__);  \
+                                                                       (__HANDLE__)->ChannelState[2]  = \
+                                                                       (__CHANNEL_STATE__);  \
+                                                                       (__HANDLE__)->ChannelState[3]  = \
+                                                                       (__CHANNEL_STATE__);  \
+                                                                       (__HANDLE__)->ChannelState[4]  = \
+                                                                       (__CHANNEL_STATE__);  \
+                                                                       (__HANDLE__)->ChannelState[5]  = \
+                                                                       (__CHANNEL_STATE__);  \
+                                                                     } while(0)
 
 #define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\
   (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\
@@ -2330,11 +2342,15 @@ mode.
    ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__)))
 
 #define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__,  __CHANNEL_STATE__) do { \
-  (__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__);  \
-  (__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__);  \
-  (__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__);  \
-  (__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__);  \
- } while(0)
+                                                                         (__HANDLE__)->ChannelNState[0] = \
+                                                                         (__CHANNEL_STATE__);  \
+                                                                         (__HANDLE__)->ChannelNState[1] = \
+                                                                         (__CHANNEL_STATE__);  \
+                                                                         (__HANDLE__)->ChannelNState[2] = \
+                                                                         (__CHANNEL_STATE__);  \
+                                                                         (__HANDLE__)->ChannelNState[3] = \
+                                                                         (__CHANNEL_STATE__);  \
+                                                                       } while(0)
 
 /**
   * @}
@@ -2508,14 +2524,14 @@ HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_Sla
 HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
                                               uint32_t BurstRequestSrc, uint32_t  *BurstBuffer, uint32_t  BurstLength);
 HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
-                                                   uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength,
-                                                   uint32_t DataLength);
+                                                   uint32_t BurstRequestSrc, uint32_t *BurstBuffer,
+                                                   uint32_t BurstLength,  uint32_t DataLength);
 HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
 HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
                                              uint32_t BurstRequestSrc, uint32_t  *BurstBuffer, uint32_t  BurstLength);
 HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
-                                                  uint32_t BurstRequestSrc, uint32_t  *BurstBuffer, uint32_t  BurstLength,
-                                                  uint32_t  DataLength);
+                                                  uint32_t BurstRequestSrc, uint32_t  *BurstBuffer,
+                                                  uint32_t  BurstLength, uint32_t  DataLength);
 HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
 HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
 uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
@@ -2613,5 +2629,3 @@ void TIM_ResetCallback(TIM_HandleTypeDef *htim);
 #endif
 
 #endif /* STM32G4xx_HAL_TIM_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_tim_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -71,27 +70,26 @@ typedef struct
                                 This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
   uint32_t Polarity;       /*!< Specifies the break input source polarity.
                                 This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity */
-}
-TIMEx_BreakInputConfigTypeDef;
+} TIMEx_BreakInputConfigTypeDef;
 
 /**
   * @brief  TIM Encoder index configuration
   */
 typedef struct
 {
-  uint32_t Polarity;                  /*!< TIM Encoder index polarity.
-                                           This parameter can be a value of @ref TIMEx_Encoder_Index_Polarity */
-  uint32_t Prescaler;                 /*!< TIM Encoder index prescaler.
-                                           This parameter can be a value of @ref TIMEx_Encoder_Index_Prescaler */
-  uint32_t Filter;                    /*!< TIM Encoder index filter.
-                                           This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-  FunctionalState  FirstIndexEnable;  /*!< Specifies whether or not the encoder first index is enabled.
-                                           This parameter value can be ENABLE or DISABLE. */
-  uint32_t Position;                  /*!< Specifies in which AB input configuration the index event resets the counter.
-                                           This parameter can be a value of @ref TIMEx_Encoder_Index_Position */
-  uint32_t Direction;                 /*!< Specifies in which counter direction the index event resets the counter.
-                                           This parameter can be a value of @ref TIMEx_Encoder_Index_Direction */
-} TIMEx_EncoderIndexConfigTypeDef ;
+  uint32_t Polarity;                  /*!< TIM Encoder index polarity.This parameter can be a value of @ref TIMEx_Encoder_Index_Polarity */
+
+  uint32_t Prescaler;                 /*!< TIM Encoder index prescaler.This parameter can be a value of @ref TIMEx_Encoder_Index_Prescaler */
+
+  uint32_t Filter;                    /*!< TIM Encoder index filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+  FunctionalState  FirstIndexEnable;  /*!< Specifies whether or not the encoder first index is enabled.This parameter value can be ENABLE or DISABLE. */
+
+  uint32_t Position;                  /*!< Specifies in which AB input configuration the index event resets the counter.This parameter can be a value of @ref TIMEx_Encoder_Index_Position */
+
+  uint32_t Direction;                 /*!< Specifies in which counter direction the index event resets the counter.This parameter can be a value of @ref TIMEx_Encoder_Index_Direction */
+
+} TIMEx_EncoderIndexConfigTypeDef;
 
 /**
   * @}
@@ -262,8 +260,8 @@ typedef struct
 /** @defgroup TIMEx_Break_Input TIM Extended Break input
   * @{
   */
-#define TIM_BREAKINPUT_BRK     0x00000001U                                      /* !< Timer break input  */
-#define TIM_BREAKINPUT_BRK2    0x00000002U                                      /* !< Timer break2 input */
+#define TIM_BREAKINPUT_BRK     0x00000001U                                      /*!< Timer break input  */
+#define TIM_BREAKINPUT_BRK2    0x00000002U                                      /*!< Timer break2 input */
 /**
   * @}
   */
@@ -292,8 +290,8 @@ typedef struct
 /** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
   * @{
   */
-#define TIM_BREAKINPUTSOURCE_DISABLE     0x00000000U                            /* !< Break input source is disabled */
-#define TIM_BREAKINPUTSOURCE_ENABLE      0x00000001U                            /* !< Break input source is enabled */
+#define TIM_BREAKINPUTSOURCE_DISABLE     0x00000000U                            /*!< Break input source is disabled */
+#define TIM_BREAKINPUTSOURCE_ENABLE      0x00000001U                            /*!< Break input source is enabled */
 /**
   * @}
   */
@@ -301,8 +299,8 @@ typedef struct
 /** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
   * @{
   */
-#define TIM_BREAKINPUTSOURCE_POLARITY_LOW     0x00000001U                       /* !< Break input source is active low */
-#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH    0x00000000U                       /* !< Break input source is active_high */
+#define TIM_BREAKINPUTSOURCE_POLARITY_LOW     0x00000001U                       /*!< Break input source is active low */
+#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH    0x00000000U                       /*!< Break input source is active_high */
 /**
   * @}
   */
@@ -600,7 +598,8 @@ typedef struct
   (((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? ((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U)) - 1U) : 0U
 
 /**
-  * @brief  HELPER macro calculating the auto-reload value, with dithering feature enabled, to achieve the required output signal frequency.
+  * @brief  HELPER macro calculating the auto-reload value, with dithering feature enabled, to achieve the required
+  *         output signal frequency.
   * @note   ex: @ref __HAL_TIM_CALC_PERIOD_DITHER(1000000, 0, 10000);
   * @note   This macro should be used only if dithering is already enabled
   * @param  __TIMCLK__ timer input clock frequency (in Hz)
@@ -609,10 +608,12 @@ typedef struct
   * @retval  Auto-reload value  (between Min_Data=0 and Max_Data=65519)
   */
 #define __HAL_TIM_CALC_PERIOD_DITHER(__TIMCLK__, __PSC__, __FREQ__) \
-  (((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ?   (uint32_t)(((uint64_t)(__TIMCLK__)*16/((__FREQ__) * ((__PSC__) + 1U)) - 16U)) : 0U
+  (((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? \
+  (uint32_t)(((uint64_t)(__TIMCLK__)*16/((__FREQ__) * ((__PSC__) + 1U)) - 16U)) : 0U
 
 /**
-  * @brief  HELPER macro calculating the compare value required to achieve the required timer output compare active/inactive delay.
+  * @brief  HELPER macro calculating the compare value required to achieve the required timer output compare
+  *         active/inactive delay.
   * @note   ex: @ref __HAL_TIM_CALC_PULSE(1000000, 0, 10);
   * @param  __TIMCLK__ timer input clock frequency (in Hz)
   * @param  __PSC__ prescaler
@@ -624,7 +625,8 @@ typedef struct
               / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U))))
 
 /**
-  * @brief  HELPER macro calculating the compare value, with dithering feature enabled, to achieve the required timer output compare active/inactive delay.
+  * @brief  HELPER macro calculating the compare value, with dithering feature enabled, to achieve the required timer
+  *         output compare active/inactive delay.
   * @note   ex: @ref __HAL_TIM_CALC_PULSE_DITHER(1000000, 0, 10);
   * @note   This macro should be used only if dithering is already enabled
   * @param  __TIMCLK__ timer input clock frequency (in Hz)
@@ -637,7 +639,8 @@ typedef struct
               / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U))))
 
 /**
-  * @brief  HELPER macro calculating the auto-reload value to achieve the required pulse duration (when the timer operates in one pulse mode).
+  * @brief  HELPER macro calculating the auto-reload value to achieve the required pulse duration
+  *        (when the timer operates in one pulse mode).
   * @note   ex: @ref __HAL_TIM_CALC_PERIOD_BY_DELAY(1000000, 0, 10, 20);
   * @param  __TIMCLK__ timer input clock frequency (in Hz)
   * @param  __PSC__ prescaler
@@ -650,7 +653,8 @@ typedef struct
               + __HAL_TIM_CALC_PULSE((__TIMCLK__), (__PSC__), (__DELAY__))))
 
 /**
-  * @brief  HELPER macro calculating the auto-reload value, with dithering feature enabled, to achieve the required pulse duration (when the timer operates in one pulse mode).
+  * @brief  HELPER macro calculating the auto-reload value, with dithering feature enabled, to achieve the required
+  *         pulse duration (when the timer operates in one pulse mode).
   * @note   ex: @ref __HAL_TIM_CALC_PERIOD_DITHER_BY_DELAY(1000000, 0, 10, 20);
   * @note   This macro should be used only if dithering is already enabled
   * @param  __TIMCLK__ timer input clock frequency (in Hz)
@@ -2108,7 +2112,7 @@ HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim,
 /* End of exported functions -------------------------------------------------*/
 
 /* Private functions----------------------------------------------------------*/
-/** @addtogroup TIMEx_Private_Functions TIMEx Private Functions
+/** @addtogroup TIMEx_Private_Functions TIM Extended Private Functions
   * @{
   */
 void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
@@ -2132,5 +2136,3 @@ void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma);
 
 
 #endif /* STM32G4xx_HAL_TIM_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_uart.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -214,7 +213,7 @@ typedef struct __UART_HandleTypeDef
 
   UART_AdvFeatureInitTypeDef AdvancedInit;           /*!< UART Advanced Features initialization parameters */
 
-  uint8_t                  *pTxBuffPtr;              /*!< Pointer to UART Tx transfer Buffer */
+  const uint8_t            *pTxBuffPtr;              /*!< Pointer to UART Tx transfer Buffer */
 
   uint16_t                 TxXferSize;               /*!< UART Tx Transfer size              */
 
@@ -817,10 +816,6 @@ typedef  void (*pUART_RxEventCallbackTypeDef)
   * @}
   */
 
-/* Prescaler Table used in BRR computation macros.
-   Declared as extern here to allow use of private UART macros, outside of HAL UART functions */
-extern const uint16_t UARTPrescTable[12];
-
 /**
   * @}
   */
@@ -1142,10 +1137,10 @@ extern const uint16_t UARTPrescTable[12];
   * @param  __HANDLE__ specifies the UART Handle.
   * @retval None
   */
-#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__)        \
-  do{                                                      \
-    SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE);  \
-    (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE;        \
+#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__)               \
+  do{                                                             \
+    ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE);  \
+    (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE;               \
   } while(0U)
 
 /** @brief  Disable CTS flow control.
@@ -1161,10 +1156,10 @@ extern const uint16_t UARTPrescTable[12];
   * @param  __HANDLE__ specifies the UART Handle.
   * @retval None
   */
-#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__)        \
-  do{                                                       \
-    CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
-    (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE);      \
+#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__)               \
+  do{                                                              \
+    ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+    (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE);             \
   } while(0U)
 
 /** @brief  Enable RTS flow control.
@@ -1180,10 +1175,10 @@ extern const uint16_t UARTPrescTable[12];
   * @param  __HANDLE__ specifies the UART Handle.
   * @retval None
   */
-#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__)       \
-  do{                                                     \
-    SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
-    (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE;       \
+#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__)              \
+  do{                                                            \
+    ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+    (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE;              \
   } while(0U)
 
 /** @brief  Disable RTS flow control.
@@ -1199,10 +1194,10 @@ extern const uint16_t UARTPrescTable[12];
   * @param  __HANDLE__ specifies the UART Handle.
   * @retval None
   */
-#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__)       \
-  do{                                                      \
-    CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
-    (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE);     \
+#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__)              \
+  do{                                                             \
+    ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+    (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE);            \
   } while(0U)
 /**
   * @}
@@ -1613,11 +1608,11 @@ HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart);
   */
 
 /* IO operation functions *****************************************************/
-HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout);
 HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
 HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
@@ -1697,6 +1692,17 @@ void              UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
 HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
 
+/**
+  * @}
+  */
+
+/* Private variables -----------------------------------------------------------*/
+/** @defgroup UART_Private_variables UART Private variables
+  * @{
+  */
+/* Prescaler Table used in BRR computation macros.
+   Declared as extern here to allow use of private UART macros, outside of HAL UART functions */
+extern const uint16_t UARTPrescTable[12];
 /**
   * @}
   */
@@ -1715,4 +1721,3 @@ HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pDa
 
 #endif /* STM32G4xx_HAL_UART_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_uart_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -650,4 +649,3 @@ HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_
 
 #endif /* STM32G4xx_HAL_UART_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_usart.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -125,7 +124,7 @@ typedef struct __USART_HandleTypeDef
 
   USART_InitTypeDef             Init;                    /*!< USART communication parameters      */
 
-  uint8_t                       *pTxBuffPtr;             /*!< Pointer to USART Tx transfer Buffer */
+  const uint8_t                 *pTxBuffPtr;             /*!< Pointer to USART Tx transfer Buffer */
 
   uint16_t                      TxXferSize;              /*!< USART Tx Transfer size              */
 
@@ -599,7 +598,7 @@ typedef  void (*pUSART_CallbackTypeDef)(USART_HandleTypeDef *husart);  /*!< poin
   */
 #define __HAL_USART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\
                                                          & (0x01U << (((__INTERRUPT__) & USART_ISR_MASK)>>\
-                                                                                USART_ISR_POS))) != 0U) ? SET : RESET)
+                                                                      USART_ISR_POS))) != 0U) ? SET : RESET)
 
 /** @brief  Check whether the specified USART interrupt source is enabled or not.
   * @param  __HANDLE__ specifies the USART Handle.
@@ -921,17 +920,17 @@ HAL_StatusTypeDef HAL_USART_UnRegisterCallback(USART_HandleTypeDef *husart, HAL_
   */
 
 /* IO operation functions *****************************************************/
-HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
 HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData,
                                             uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size);
 HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
-HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData,
                                                uint16_t Size);
-HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint16_t Size);
 HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
-HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, const uint8_t *pTxData, uint8_t *pRxData,
                                                 uint16_t Size);
 HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
 HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
@@ -983,4 +982,3 @@ uint32_t               HAL_USART_GetError(USART_HandleTypeDef *husart);
 
 #endif /* STM32G4xx_HAL_USART_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_usart_ex.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -281,4 +280,3 @@ HAL_StatusTypeDef HAL_USARTEx_SetRxFifoThreshold(USART_HandleTypeDef *husart, ui
 
 #endif /* STM32G4xx_HAL_USART_EX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_hal_wwdg.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -305,5 +304,3 @@ void                  HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg);
 #endif
 
 #endif /* STM32G4xx_HAL_WWDG_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_adc.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -349,7 +348,7 @@ extern "C" {
 #define TEMPSENSOR_CAL1_ADDR               ((uint16_t*) (0x1FFF75A8UL)) /* Internal temperature sensor, address of parameter TS_CAL1: On STM32G4, temperature sensor ADC raw data acquired at temperature  30 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */
 #define TEMPSENSOR_CAL2_ADDR               ((uint16_t*) (0x1FFF75CAUL)) /* Internal temperature sensor, address of parameter TS_CAL2: On STM32G4, temperature sensor ADC raw data acquired at temperature 110 DegC (tolerance: +-5 DegC), Vref+ = 3.0 V (tolerance: +-10 mV). */
 #define TEMPSENSOR_CAL1_TEMP               (30L)                        /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL1_ADDR (tolerance: +-5 DegC) (unit: DegC). */
-#define TEMPSENSOR_CAL2_TEMP               (110L)                       /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR (tolerance: +-5 DegC) (unit: DegC). */
+#define TEMPSENSOR_CAL2_TEMP               (130L)                       /* Internal temperature sensor, temperature at which temperature sensor has been calibrated in production for data into TEMPSENSOR_CAL2_ADDR (tolerance: +-5 DegC) (unit: DegC). */
 #define TEMPSENSOR_CAL_VREFANALOG          (3000UL)                     /* Analog voltage reference (Vref+) voltage with which temperature sensor has been calibrated in production (+-10 mV) (unit: mV). */
 
 /**
@@ -5495,12 +5494,20 @@ __STATIC_INLINE uint32_t LL_ADC_GetChannelSamplingTime(ADC_TypeDef *ADCx, uint32
   */
 __STATIC_INLINE void LL_ADC_SetChannelSingleDiff(ADC_TypeDef *ADCx, uint32_t Channel, uint32_t SingleDiff)
 {
-  /* Bits of channels in single or differential mode are set only for         */
-  /* differential mode (for single mode, mask of bits allowed to be set is    */
-  /* shifted out of range of bits of channels in single or differential mode. */
-  MODIFY_REG(ADCx->DIFSEL,
-             Channel & ADC_SINGLEDIFF_CHANNEL_MASK,
-             (Channel & ADC_SINGLEDIFF_CHANNEL_MASK) & (ADC_DIFSEL_DIFSEL >> (SingleDiff & ADC_SINGLEDIFF_CHANNEL_SHIFT_MASK)));
+  /* Bits for single or differential mode selection for each channel are set  */
+  /* to 1 only when the differential mode is selected, and to 0 when the      */
+  /* single mode is selected.                                                 */
+  
+  if (SingleDiff == LL_ADC_DIFFERENTIAL_ENDED)
+  {
+    SET_BIT(ADCx->DIFSEL,
+            Channel & ADC_SINGLEDIFF_CHANNEL_MASK);
+  }
+  else
+  {
+    CLEAR_BIT(ADCx->DIFSEL,
+            Channel & ADC_SINGLEDIFF_CHANNEL_MASK);
+  }
 }
 
 /**
@@ -5856,7 +5863,7 @@ __STATIC_INLINE uint32_t LL_ADC_GetAnalogWDMonitChannels(ADC_TypeDef *ADCx, uint
   const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR, ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS)
                                                    + ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) * ADC_AWD_CR12_REGOFFSETGAP_VAL));
 
-  uint32_t AnalogWDMonitChannels = (READ_BIT(*preg, AWDy) & AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK);
+  uint32_t AnalogWDMonitChannels = (READ_BIT(*preg, AWDy) & ADC_AWD_CR_ALL_CHANNEL_MASK);
 
   /* If "AnalogWDMonitChannels" == 0, then the selected AWD is disabled       */
   /* (parameter value LL_ADC_AWD_DISABLE).                                    */
@@ -8174,5 +8181,3 @@ void        LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct);
 #endif
 
 #endif /* STM32G4xx_LL_ADC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_bus.h

@@ -23,14 +23,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */
 
@@ -1680,4 +1678,3 @@ __STATIC_INLINE void LL_APB2_GRP1_DisableClockStopSleep(uint32_t Periphs)
 
 #endif /* STM32G4xx_LL_BUS_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_comp.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -756,5 +755,3 @@ void        LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct);
 #endif
 
 #endif /* STM32G4xx_LL_COMP_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_cordic.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -782,5 +781,3 @@ ErrorStatus LL_CORDIC_DeInit(CORDIC_TypeDef *CORDICx);
 #endif
 
 #endif /* STM32G4xx_LL_CORDIC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_cortex.h

@@ -3,6 +3,17 @@
   * @file    stm32g4xx_ll_cortex.h
   * @author  MCD Application Team
   * @brief   Header file of CORTEX LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
   @verbatim
   ==============================================================================
                      ##### How to use this driver #####
@@ -10,7 +21,7 @@
     [..]
     The LL CORTEX driver contains a set of generic APIs that can be
     used by user:
-      (+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick
+      (+) SYSTICK configuration used by LL_mDelay and LL_Init1msTick
           functions
       (+) Low power mode configuration (SCB register of Cortex-MCU)
       (+) MPU API to configure and enable regions
@@ -18,18 +29,6 @@
       (+) API to enable fault handler (SHCSR accesses)
 
   @endverbatim
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
   */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
@@ -636,4 +635,3 @@ __STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region)
 
 #endif /* __STM32G4xx_LL_CORTEX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_crc.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -236,7 +235,7 @@ __STATIC_INLINE void LL_CRC_SetOutputDataReverseMode(CRC_TypeDef *CRCx, uint32_t
 }
 
 /**
-  * @brief  Configure the reversal of the bit order of the Output data
+  * @brief  Return type of reversal of the bit order of the Output data
   * @rmtoll CR           REV_OUT       LL_CRC_GetOutputDataReverseMode
   * @param  CRCx CRC Instance
   * @retval Returned value can be one of the following values:
@@ -460,5 +459,3 @@ ErrorStatus LL_CRC_DeInit(CRC_TypeDef *CRCx);
 #endif
 
 #endif /* STM32G4xx_LL_CRC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_crs.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -780,4 +779,3 @@ ErrorStatus LL_CRS_DeInit(void);
 
 #endif /* __STM32G4xx_LL_CRS_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_dac.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -2403,6 +2402,7 @@ __STATIC_INLINE uint32_t LL_DAC_RetrieveOutputData(DAC_TypeDef *DACx, uint32_t D
 /** @defgroup DAC_LL_EF_FLAG_Management FLAG Management
   * @{
   */
+
 /**
   * @brief  Get DAC calibration offset flag for DAC channel 1
   * @rmtoll SR       CAL_FLAG1      LL_DAC_IsActiveFlag_CAL1
@@ -2663,4 +2663,3 @@ void        LL_DAC_StructInit(LL_DAC_InitTypeDef *DAC_InitStruct);
 
 #endif /* STM32G4xx_LL_DAC_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_dma.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -2577,4 +2576,3 @@ void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct);
 
 #endif /* __STM32G4xx_LL_DMA_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_dmamux.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -2005,4 +2004,3 @@ __STATIC_INLINE uint32_t LL_DMAMUX_IsEnabledIT_RGO(DMAMUX_Channel_TypeDef *DMAMU
 
 #endif /* __STM32G4xx_LL_DMAMUX_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_exti.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -1421,4 +1420,3 @@ void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct);
 
 #endif /* __STM32G4xx_LL_EXTI_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_fmac.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -1062,5 +1061,3 @@ ErrorStatus LL_FMAC_DeInit(FMAC_TypeDef *FMACx);
 #endif
 
 #endif /* STM32G4xx_LL_FMAC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_fmc.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                       opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -854,5 +853,3 @@ HAL_StatusTypeDef  FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, u
 #endif
 
 #endif /* STM32G4xx_LL_FMC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_gpio.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -993,4 +992,3 @@ void        LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct);
 
 #endif /* STM32G4xx_LL_GPIO_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_hrtim.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -570,10 +569,10 @@ static const uint32_t REG_MASK_TAB_CPT[] =
   * @{
   * @brief Constants defining the source and event to be sent on the synchronization output.
   */
-#define LL_HRTIM_SYNCOUT_SRC_MASTER_START  0x00000000U                        /*!< A pulse is sent on the SYNCOUT output upon master timer start event */
-#define LL_HRTIM_SYNCOUT_SRC_MASTER_CMP1   (HRTIM_MCR_SYNC_SRC_0)                         /*!< A pulse is sent on the SYNCOUT output upon master timer compare 1 event*/
-#define LL_HRTIM_SYNCOUT_SRC_TIMA_START    (HRTIM_MCR_SYNC_SRC_1)                         /*!< A pulse is sent on the SYNCOUT output upon timer A start or reset events */
-#define LL_HRTIM_SYNCOUT_SRC_TIMA_CMP1     (HRTIM_MCR_SYNC_SRC_1 | HRTIM_MCR_SYNC_SRC_0)  /*!< A pulse is sent on the SYNCOUT output upon timer A compare 1 event */
+#define LL_HRTIM_SYNCOUT_SRC_MASTER_START  0x00000000U                                    /*!< A pulse is sent on HRTIM_SCOUT output and hrtim_out_sync2 upon master timer start event      */
+#define LL_HRTIM_SYNCOUT_SRC_MASTER_CMP1   (HRTIM_MCR_SYNC_SRC_0)                         /*!< A pulse is sent on HRTIM_SCOUT output and hrtim_out_sync2 upon master timer compare 1 event  */
+#define LL_HRTIM_SYNCOUT_SRC_TIMA_START    (HRTIM_MCR_SYNC_SRC_1)                         /*!< A pulse is sent on HRTIM_SCOUT output and hrtim_out_sync2 upon timer A start or reset events */
+#define LL_HRTIM_SYNCOUT_SRC_TIMA_CMP1     (HRTIM_MCR_SYNC_SRC_1 | HRTIM_MCR_SYNC_SRC_0)  /*!< A pulse is sent on HRTIM_SCOUT output and hrtim_out_sync2 upon timer A compare 1 event       */
 /**
   * @}
   */
@@ -3910,6 +3909,8 @@ __STATIC_INLINE uint32_t LL_HRTIM_TIM_IsEnabledHalfMode(HRTIM_TypeDef *HRTIMx, u
   * @brief  Enable the Re-Syncronisation Update.
   * @note   The update coming from adjacent timers (when MSTU, TAU, TBU, TCU, TDU, TEU, TFU bit is set)
   *         or from a software update (TxSWU bit) is taken into account on the following reset/roll-over.
+  * @note   LL_HRTIM_ForceUpdate must be called prior programming the syncrhonization mode to force
+  *         immediate update of the slave timer registers.
   * @rmtoll TIMxCR     RSYNCU         LL_HRTIM_TIM_EnableResyncUpdate
   * @param  HRTIMx High Resolution Timer instance
   * @param  Timer This parameter can be one of the following values:
@@ -13892,6 +13893,4 @@ ErrorStatus LL_HRTIM_DeInit(HRTIM_TypeDef* HRTIMx);
 
 #endif /* STM32G4xx_LL_HRTIM_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
 

Inc/stm32g4xx_ll_i2c.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -69,38 +68,46 @@ typedef struct
   uint32_t PeripheralMode;      /*!< Specifies the peripheral mode.
                                      This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE.
 
-                                     This feature can be modified afterwards using unitary function @ref LL_I2C_SetMode(). */
+                                     This feature can be modified afterwards using unitary function
+                                     @ref LL_I2C_SetMode(). */
 
   uint32_t Timing;              /*!< Specifies the SDA setup, hold time and the SCL high, low period values.
                                      This parameter must be set by referring to the STM32CubeMX Tool and
                                      the helper macro @ref __LL_I2C_CONVERT_TIMINGS().
 
-                                     This feature can be modified afterwards using unitary function @ref LL_I2C_SetTiming(). */
+                                     This feature can be modified afterwards using unitary function
+                                     @ref LL_I2C_SetTiming(). */
 
   uint32_t AnalogFilter;        /*!< Enables or disables analog noise filter.
                                      This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION.
 
-                                     This feature can be modified afterwards using unitary functions @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */
+                                     This feature can be modified afterwards using unitary functions
+                                     @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */
 
   uint32_t DigitalFilter;       /*!< Configures the digital noise filter.
                                      This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F.
 
-                                     This feature can be modified afterwards using unitary function @ref LL_I2C_SetDigitalFilter(). */
+                                     This feature can be modified afterwards using unitary function
+                                     @ref LL_I2C_SetDigitalFilter(). */
 
   uint32_t OwnAddress1;         /*!< Specifies the device own address 1.
                                      This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF.
 
-                                     This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */
+                                     This feature can be modified afterwards using unitary function
+                                     @ref LL_I2C_SetOwnAddress1(). */
 
-  uint32_t TypeAcknowledge;     /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte.
+  uint32_t TypeAcknowledge;     /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive
+                                     match code or next received byte.
                                      This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE.
 
-                                     This feature can be modified afterwards using unitary function @ref LL_I2C_AcknowledgeNextData(). */
+                                     This feature can be modified afterwards using unitary function
+                                     @ref LL_I2C_AcknowledgeNextData(). */
 
   uint32_t OwnAddrSize;         /*!< Specifies the device own address 1 size (7-bit or 10-bit).
                                      This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1.
 
-                                     This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */
+                                     This feature can be modified afterwards using unitary function
+                                     @ref LL_I2C_SetOwnAddress1(). */
 } LL_I2C_InitTypeDef;
 /**
   * @}
@@ -170,10 +177,11 @@ typedef struct
 /** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode
   * @{
   */
-#define LL_I2C_MODE_I2C                    0x00000000U              /*!< I2C Master or Slave mode                                    */
-#define LL_I2C_MODE_SMBUS_HOST             I2C_CR1_SMBHEN           /*!< SMBus Host address acknowledge                              */
-#define LL_I2C_MODE_SMBUS_DEVICE           0x00000000U              /*!< SMBus Device default mode (Default address not acknowledge) */
-#define LL_I2C_MODE_SMBUS_DEVICE_ARP       I2C_CR1_SMBDEN           /*!< SMBus Device Default address acknowledge                    */
+#define LL_I2C_MODE_I2C                    0x00000000U              /*!< I2C Master or Slave mode                 */
+#define LL_I2C_MODE_SMBUS_HOST             I2C_CR1_SMBHEN           /*!< SMBus Host address acknowledge           */
+#define LL_I2C_MODE_SMBUS_DEVICE           0x00000000U              /*!< SMBus Device default mode
+                                                                         (Default address not acknowledge)        */
+#define LL_I2C_MODE_SMBUS_DEVICE_ARP       I2C_CR1_SMBDEN           /*!< SMBus Device Default address acknowledge */
 /**
   * @}
   */
@@ -208,14 +216,15 @@ typedef struct
 /** @defgroup I2C_LL_EC_OWNADDRESS2 Own Address 2 Masks
   * @{
   */
-#define LL_I2C_OWNADDRESS2_NOMASK           I2C_OAR2_OA2NOMASK      /*!< Own Address2 No mask.                                */
-#define LL_I2C_OWNADDRESS2_MASK01           I2C_OAR2_OA2MASK01      /*!< Only Address2 bits[7:2] are compared.                */
-#define LL_I2C_OWNADDRESS2_MASK02           I2C_OAR2_OA2MASK02      /*!< Only Address2 bits[7:3] are compared.                */
-#define LL_I2C_OWNADDRESS2_MASK03           I2C_OAR2_OA2MASK03      /*!< Only Address2 bits[7:4] are compared.                */
-#define LL_I2C_OWNADDRESS2_MASK04           I2C_OAR2_OA2MASK04      /*!< Only Address2 bits[7:5] are compared.                */
-#define LL_I2C_OWNADDRESS2_MASK05           I2C_OAR2_OA2MASK05      /*!< Only Address2 bits[7:6] are compared.                */
-#define LL_I2C_OWNADDRESS2_MASK06           I2C_OAR2_OA2MASK06      /*!< Only Address2 bits[7] are compared.                  */
-#define LL_I2C_OWNADDRESS2_MASK07           I2C_OAR2_OA2MASK07      /*!< No comparison is done. All Address2 are acknowledged.*/
+#define LL_I2C_OWNADDRESS2_NOMASK           I2C_OAR2_OA2NOMASK      /*!< Own Address2 No mask.                 */
+#define LL_I2C_OWNADDRESS2_MASK01           I2C_OAR2_OA2MASK01      /*!< Only Address2 bits[7:2] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK02           I2C_OAR2_OA2MASK02      /*!< Only Address2 bits[7:3] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK03           I2C_OAR2_OA2MASK03      /*!< Only Address2 bits[7:4] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK04           I2C_OAR2_OA2MASK04      /*!< Only Address2 bits[7:5] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK05           I2C_OAR2_OA2MASK05      /*!< Only Address2 bits[7:6] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK06           I2C_OAR2_OA2MASK06      /*!< Only Address2 bits[7] are compared.   */
+#define LL_I2C_OWNADDRESS2_MASK07           I2C_OAR2_OA2MASK07      /*!< No comparison is done.
+                                                                         All Address2 are acknowledged.        */
 /**
   * @}
   */
@@ -250,14 +259,21 @@ typedef struct
 /** @defgroup I2C_LL_EC_MODE Transfer End Mode
   * @{
   */
-#define LL_I2C_MODE_RELOAD                  I2C_CR2_RELOAD                                      /*!< Enable I2C Reload mode.                                   */
-#define LL_I2C_MODE_AUTOEND                 I2C_CR2_AUTOEND                                     /*!< Enable I2C Automatic end mode with no HW PEC comparison.  */
-#define LL_I2C_MODE_SOFTEND                 0x00000000U                                         /*!< Enable I2C Software end mode with no HW PEC comparison.   */
-#define LL_I2C_MODE_SMBUS_RELOAD            LL_I2C_MODE_RELOAD                                  /*!< Enable SMBUS Automatic end mode with HW PEC comparison.   */
-#define LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC    LL_I2C_MODE_AUTOEND                                 /*!< Enable SMBUS Automatic end mode with HW PEC comparison.   */
-#define LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC    LL_I2C_MODE_SOFTEND                                 /*!< Enable SMBUS Software end mode with HW PEC comparison.    */
-#define LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC  (uint32_t)(LL_I2C_MODE_AUTOEND | I2C_CR2_PECBYTE)   /*!< Enable SMBUS Automatic end mode with HW PEC comparison.   */
-#define LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC  (uint32_t)(LL_I2C_MODE_SOFTEND | I2C_CR2_PECBYTE)   /*!< Enable SMBUS Software end mode with HW PEC comparison.    */
+#define LL_I2C_MODE_RELOAD                  I2C_CR2_RELOAD           /*!< Enable I2C Reload mode.     */
+#define LL_I2C_MODE_AUTOEND                 I2C_CR2_AUTOEND          /*!< Enable I2C Automatic end mode
+                                                                          with no HW PEC comparison.  */
+#define LL_I2C_MODE_SOFTEND                 0x00000000U              /*!< Enable I2C Software end mode
+                                                                          with no HW PEC comparison.  */
+#define LL_I2C_MODE_SMBUS_RELOAD            LL_I2C_MODE_RELOAD       /*!< Enable SMBUS Automatic end mode
+                                                                          with HW PEC comparison.     */
+#define LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC    LL_I2C_MODE_AUTOEND      /*!< Enable SMBUS Automatic end mode
+                                                                          with HW PEC comparison.     */
+#define LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC    LL_I2C_MODE_SOFTEND      /*!< Enable SMBUS Software end mode
+                                                                          with HW PEC comparison.     */
+#define LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC  (uint32_t)(LL_I2C_MODE_AUTOEND | I2C_CR2_PECBYTE)
+/*!< Enable SMBUS Automatic end mode with HW PEC comparison.   */
+#define LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC  (uint32_t)(LL_I2C_MODE_SOFTEND | I2C_CR2_PECBYTE)
+/*!< Enable SMBUS Software end mode with HW PEC comparison.    */
 /**
   * @}
   */
@@ -265,14 +281,23 @@ typedef struct
 /** @defgroup I2C_LL_EC_GENERATE Start And Stop Generation
   * @{
   */
-#define LL_I2C_GENERATE_NOSTARTSTOP         0x00000000U                                                                /*!< Don't Generate Stop and Start condition.                */
-#define LL_I2C_GENERATE_STOP                (uint32_t)(0x80000000U | I2C_CR2_STOP)                                     /*!< Generate Stop condition (Size should be set to 0).      */
-#define LL_I2C_GENERATE_START_READ          (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)                   /*!< Generate Start for read request.                        */
-#define LL_I2C_GENERATE_START_WRITE         (uint32_t)(0x80000000U | I2C_CR2_START)                                    /*!< Generate Start for write request.                       */
-#define LL_I2C_GENERATE_RESTART_7BIT_READ   (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)                   /*!< Generate Restart for read request, slave 7Bit address.  */
-#define LL_I2C_GENERATE_RESTART_7BIT_WRITE  (uint32_t)(0x80000000U | I2C_CR2_START)                                    /*!< Generate Restart for write request, slave 7Bit address. */
-#define LL_I2C_GENERATE_RESTART_10BIT_READ  (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN | I2C_CR2_HEAD10R) /*!< Generate Restart for read request, slave 10Bit address. */
-#define LL_I2C_GENERATE_RESTART_10BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)                                    /*!< Generate Restart for write request, slave 10Bit address.*/
+#define LL_I2C_GENERATE_NOSTARTSTOP         0x00000000U
+/*!< Don't Generate Stop and Start condition. */
+#define LL_I2C_GENERATE_STOP                (uint32_t)(0x80000000U | I2C_CR2_STOP)
+/*!< Generate Stop condition (Size should be set to 0).      */
+#define LL_I2C_GENERATE_START_READ          (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
+/*!< Generate Start for read request. */
+#define LL_I2C_GENERATE_START_WRITE         (uint32_t)(0x80000000U | I2C_CR2_START)
+/*!< Generate Start for write request. */
+#define LL_I2C_GENERATE_RESTART_7BIT_READ   (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
+/*!< Generate Restart for read request, slave 7Bit address.  */
+#define LL_I2C_GENERATE_RESTART_7BIT_WRITE  (uint32_t)(0x80000000U | I2C_CR2_START)
+/*!< Generate Restart for write request, slave 7Bit address. */
+#define LL_I2C_GENERATE_RESTART_10BIT_READ  (uint32_t)(0x80000000U | I2C_CR2_START | \
+                                                       I2C_CR2_RD_WRN | I2C_CR2_HEAD10R)
+/*!< Generate Restart for read request, slave 10Bit address. */
+#define LL_I2C_GENERATE_RESTART_10BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
+/*!< Generate Restart for write request, slave 10Bit address.*/
 /**
   * @}
   */
@@ -280,8 +305,10 @@ typedef struct
 /** @defgroup I2C_LL_EC_DIRECTION Read Write Direction
   * @{
   */
-#define LL_I2C_DIRECTION_WRITE              0x00000000U              /*!< Write transfer request by master, slave enters receiver mode.  */
-#define LL_I2C_DIRECTION_READ               I2C_ISR_DIR              /*!< Read transfer request by master, slave enters transmitter mode.*/
+#define LL_I2C_DIRECTION_WRITE              0x00000000U              /*!< Write transfer request by master,
+                                                                          slave enters receiver mode.  */
+#define LL_I2C_DIRECTION_READ               I2C_ISR_DIR              /*!< Read transfer request by master,
+                                                                          slave enters transmitter mode.*/
 /**
   * @}
   */
@@ -289,8 +316,10 @@ typedef struct
 /** @defgroup I2C_LL_EC_DMA_REG_DATA DMA Register Data
   * @{
   */
-#define LL_I2C_DMA_REG_DATA_TRANSMIT        0x00000000U              /*!< Get address of data register used for transmission */
-#define LL_I2C_DMA_REG_DATA_RECEIVE         0x00000001U              /*!< Get address of data register used for reception */
+#define LL_I2C_DMA_REG_DATA_TRANSMIT        0x00000000U              /*!< Get address of data register used for
+                                                                          transmission */
+#define LL_I2C_DMA_REG_DATA_RECEIVE         0x00000001U              /*!< Get address of data register used for
+                                                                          reception */
 /**
   * @}
   */
@@ -298,8 +327,10 @@ typedef struct
 /** @defgroup I2C_LL_EC_SMBUS_TIMEOUTA_MODE SMBus TimeoutA Mode SCL SDA Timeout
   * @{
   */
-#define LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW      0x00000000U          /*!< TimeoutA is used to detect SCL low level timeout.              */
-#define LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH I2C_TIMEOUTR_TIDLE   /*!< TimeoutA is used to detect both SCL and SDA high level timeout.*/
+#define LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW      0x00000000U          /*!< TimeoutA is used to detect
+                                                                          SCL low level timeout.              */
+#define LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH I2C_TIMEOUTR_TIDLE   /*!< TimeoutA is used to detect
+                                                                          both SCL and SDA high level timeout.*/
 /**
   * @}
   */
@@ -307,9 +338,12 @@ typedef struct
 /** @defgroup I2C_LL_EC_SMBUS_TIMEOUT_SELECTION SMBus Timeout Selection
   * @{
   */
-#define LL_I2C_SMBUS_TIMEOUTA               I2C_TIMEOUTR_TIMOUTEN                                   /*!< TimeoutA enable bit                                */
-#define LL_I2C_SMBUS_TIMEOUTB               I2C_TIMEOUTR_TEXTEN                                     /*!< TimeoutB (extended clock) enable bit               */
-#define LL_I2C_SMBUS_ALL_TIMEOUT            (uint32_t)(I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN) /*!< TimeoutA and TimeoutB (extended clock) enable bits */
+#define LL_I2C_SMBUS_TIMEOUTA               I2C_TIMEOUTR_TIMOUTEN                 /*!< TimeoutA enable bit          */
+#define LL_I2C_SMBUS_TIMEOUTB               I2C_TIMEOUTR_TEXTEN                   /*!< TimeoutB (extended clock)
+                                                                                       enable bit                   */
+#define LL_I2C_SMBUS_ALL_TIMEOUT            (uint32_t)(I2C_TIMEOUTR_TIMOUTEN | \
+                                                       I2C_TIMEOUTR_TEXTEN)       /*!< TimeoutA and TimeoutB
+(extended clock) enable bits */
 /**
   * @}
   */
@@ -353,18 +387,22 @@ typedef struct
 /**
   * @brief  Configure the SDA setup, hold time and the SCL high, low period.
   * @param  __PRESCALER__ This parameter must be a value between  Min_Data=0 and Max_Data=0xF.
-  * @param  __DATA_SETUP_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. (tscldel = (SCLDEL+1)xtpresc)
-  * @param  __DATA_HOLD_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. (tsdadel = SDADELxtpresc)
-  * @param  __CLOCK_HIGH_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. (tsclh = (SCLH+1)xtpresc)
-  * @param  __CLOCK_LOW_PERIOD__ This parameter must be a value between  Min_Data=0 and Max_Data=0xFF. (tscll = (SCLL+1)xtpresc)
+  * @param  __SETUP_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF.
+                           (tscldel = (SCLDEL+1)xtpresc)
+  * @param  __HOLD_TIME__  This parameter must be a value between Min_Data=0 and Max_Data=0xF.
+                           (tsdadel = SDADELxtpresc)
+  * @param  __SCLH_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF.
+                            (tsclh = (SCLH+1)xtpresc)
+  * @param  __SCLL_PERIOD__ This parameter must be a value between  Min_Data=0 and Max_Data=0xFF.
+                            (tscll = (SCLL+1)xtpresc)
   * @retval Value between Min_Data=0 and Max_Data=0xFFFFFFFF
   */
-#define __LL_I2C_CONVERT_TIMINGS(__PRESCALER__, __DATA_SETUP_TIME__, __DATA_HOLD_TIME__, __CLOCK_HIGH_PERIOD__, __CLOCK_LOW_PERIOD__)   \
-  ((((uint32_t)(__PRESCALER__)         << I2C_TIMINGR_PRESC_Pos)  & I2C_TIMINGR_PRESC)   | \
-   (((uint32_t)(__DATA_SETUP_TIME__)   << I2C_TIMINGR_SCLDEL_Pos) & I2C_TIMINGR_SCLDEL)  | \
-   (((uint32_t)(__DATA_HOLD_TIME__)    << I2C_TIMINGR_SDADEL_Pos) & I2C_TIMINGR_SDADEL)  | \
-   (((uint32_t)(__CLOCK_HIGH_PERIOD__) << I2C_TIMINGR_SCLH_Pos)   & I2C_TIMINGR_SCLH)    | \
-   (((uint32_t)(__CLOCK_LOW_PERIOD__)  << I2C_TIMINGR_SCLL_Pos)   & I2C_TIMINGR_SCLL))
+#define __LL_I2C_CONVERT_TIMINGS(__PRESCALER__, __SETUP_TIME__, __HOLD_TIME__, __SCLH_PERIOD__, __SCLL_PERIOD__) \
+  ((((uint32_t)(__PRESCALER__)    << I2C_TIMINGR_PRESC_Pos)  & I2C_TIMINGR_PRESC)   | \
+   (((uint32_t)(__SETUP_TIME__)   << I2C_TIMINGR_SCLDEL_Pos) & I2C_TIMINGR_SCLDEL)  | \
+   (((uint32_t)(__HOLD_TIME__)    << I2C_TIMINGR_SDADEL_Pos) & I2C_TIMINGR_SDADEL)  | \
+   (((uint32_t)(__SCLH_PERIOD__)  << I2C_TIMINGR_SCLH_Pos)   & I2C_TIMINGR_SCLH)    | \
+   (((uint32_t)(__SCLL_PERIOD__)  << I2C_TIMINGR_SCLL_Pos)   & I2C_TIMINGR_SCLL))
 /**
   * @}
   */
@@ -428,7 +466,8 @@ __STATIC_INLINE uint32_t LL_I2C_IsEnabled(I2C_TypeDef *I2Cx)
   * @param  AnalogFilter This parameter can be one of the following values:
   *         @arg @ref LL_I2C_ANALOGFILTER_ENABLE
   *         @arg @ref LL_I2C_ANALOGFILTER_DISABLE
-  * @param  DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk).
+  * @param  DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled)
+                          and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk).
   *         This parameter is used to configure the digital noise filter on SDA and SCL input.
   *         The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk.
   * @retval None
@@ -444,7 +483,8 @@ __STATIC_INLINE void LL_I2C_ConfigFilters(I2C_TypeDef *I2Cx, uint32_t AnalogFilt
   *         This filter can only be programmed when the I2C is disabled (PE = 0).
   * @rmtoll CR1          DNF           LL_I2C_SetDigitalFilter
   * @param  I2Cx I2C Instance.
-  * @param  DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk).
+  * @param  DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled)
+                          and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk).
   *         This parameter is used to configure the digital noise filter on SDA and SCL input.
   *         The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk.
   * @retval None
@@ -664,7 +704,7 @@ __STATIC_INLINE uint32_t LL_I2C_IsEnabledSlaveByteControl(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Enable Wakeup from STOP.
-  * @note   Macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
   *         WakeUpFromStop feature is supported by the I2Cx Instance.
   * @note   This bit can only be programmed when Digital Filter is disabled.
   * @rmtoll CR1          WUPEN         LL_I2C_EnableWakeUpFromStop
@@ -678,7 +718,7 @@ __STATIC_INLINE void LL_I2C_EnableWakeUpFromStop(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Disable Wakeup from STOP.
-  * @note   Macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
   *         WakeUpFromStop feature is supported by the I2Cx Instance.
   * @rmtoll CR1          WUPEN         LL_I2C_DisableWakeUpFromStop
   * @param  I2Cx I2C Instance.
@@ -691,7 +731,7 @@ __STATIC_INLINE void LL_I2C_DisableWakeUpFromStop(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Check if Wakeup from STOP is enabled or disabled.
-  * @note   Macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
   *         WakeUpFromStop feature is supported by the I2Cx Instance.
   * @rmtoll CR1          WUPEN         LL_I2C_IsEnabledWakeUpFromStop
   * @param  I2Cx I2C Instance.
@@ -941,7 +981,7 @@ __STATIC_INLINE uint32_t LL_I2C_GetDataSetupTime(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Configure peripheral mode.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll CR1          SMBHEN        LL_I2C_SetMode\n
   *         CR1          SMBDEN        LL_I2C_SetMode
@@ -960,7 +1000,7 @@ __STATIC_INLINE void LL_I2C_SetMode(I2C_TypeDef *I2Cx, uint32_t PeripheralMode)
 
 /**
   * @brief  Get peripheral mode.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll CR1          SMBHEN        LL_I2C_GetMode\n
   *         CR1          SMBDEN        LL_I2C_GetMode
@@ -978,7 +1018,7 @@ __STATIC_INLINE uint32_t LL_I2C_GetMode(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Enable SMBus alert (Host or Device mode)
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @note   SMBus Device mode:
   *         - SMBus Alert pin is drived low and
@@ -996,7 +1036,7 @@ __STATIC_INLINE void LL_I2C_EnableSMBusAlert(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Disable SMBus alert (Host or Device mode)
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @note   SMBus Device mode:
   *         - SMBus Alert pin is not drived (can be used as a standard GPIO) and
@@ -1014,7 +1054,7 @@ __STATIC_INLINE void LL_I2C_DisableSMBusAlert(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Check if SMBus alert (Host or Device mode) is enabled or disabled.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll CR1          ALERTEN       LL_I2C_IsEnabledSMBusAlert
   * @param  I2Cx I2C Instance.
@@ -1027,7 +1067,7 @@ __STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusAlert(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Enable SMBus Packet Error Calculation (PEC).
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll CR1          PECEN         LL_I2C_EnableSMBusPEC
   * @param  I2Cx I2C Instance.
@@ -1040,7 +1080,7 @@ __STATIC_INLINE void LL_I2C_EnableSMBusPEC(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Disable SMBus Packet Error Calculation (PEC).
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll CR1          PECEN         LL_I2C_DisableSMBusPEC
   * @param  I2Cx I2C Instance.
@@ -1053,7 +1093,7 @@ __STATIC_INLINE void LL_I2C_DisableSMBusPEC(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Check if SMBus Packet Error Calculation (PEC) is enabled or disabled.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll CR1          PECEN         LL_I2C_IsEnabledSMBusPEC
   * @param  I2Cx I2C Instance.
@@ -1066,7 +1106,7 @@ __STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPEC(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Configure the SMBus Clock Timeout.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @note   This configuration can only be programmed when associated Timeout is disabled (TimeoutA and/orTimeoutB).
   * @rmtoll TIMEOUTR     TIMEOUTA      LL_I2C_ConfigSMBusTimeout\n
@@ -1089,7 +1129,7 @@ __STATIC_INLINE void LL_I2C_ConfigSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t Timeo
 
 /**
   * @brief  Configure the SMBus Clock TimeoutA (SCL low timeout or SCL and SDA high timeout depends on TimeoutA mode).
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @note   These bits can only be programmed when TimeoutA is disabled.
   * @rmtoll TIMEOUTR     TIMEOUTA      LL_I2C_SetSMBusTimeoutA
@@ -1104,7 +1144,7 @@ __STATIC_INLINE void LL_I2C_SetSMBusTimeoutA(I2C_TypeDef *I2Cx, uint32_t Timeout
 
 /**
   * @brief  Get the SMBus Clock TimeoutA setting.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll TIMEOUTR     TIMEOUTA      LL_I2C_GetSMBusTimeoutA
   * @param  I2Cx I2C Instance.
@@ -1117,7 +1157,7 @@ __STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutA(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Set the SMBus Clock TimeoutA mode.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @note   This bit can only be programmed when TimeoutA is disabled.
   * @rmtoll TIMEOUTR     TIDLE         LL_I2C_SetSMBusTimeoutAMode
@@ -1134,7 +1174,7 @@ __STATIC_INLINE void LL_I2C_SetSMBusTimeoutAMode(I2C_TypeDef *I2Cx, uint32_t Tim
 
 /**
   * @brief  Get the SMBus Clock TimeoutA mode.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll TIMEOUTR     TIDLE         LL_I2C_GetSMBusTimeoutAMode
   * @param  I2Cx I2C Instance.
@@ -1149,7 +1189,7 @@ __STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutAMode(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Configure the SMBus Extended Cumulative Clock TimeoutB (Master or Slave mode).
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @note   These bits can only be programmed when TimeoutB is disabled.
   * @rmtoll TIMEOUTR     TIMEOUTB      LL_I2C_SetSMBusTimeoutB
@@ -1164,7 +1204,7 @@ __STATIC_INLINE void LL_I2C_SetSMBusTimeoutB(I2C_TypeDef *I2Cx, uint32_t Timeout
 
 /**
   * @brief  Get the SMBus Extended Cumulative Clock TimeoutB setting.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll TIMEOUTR     TIMEOUTB      LL_I2C_GetSMBusTimeoutB
   * @param  I2Cx I2C Instance.
@@ -1177,7 +1217,7 @@ __STATIC_INLINE uint32_t LL_I2C_GetSMBusTimeoutB(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Enable the SMBus Clock Timeout.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll TIMEOUTR     TIMOUTEN      LL_I2C_EnableSMBusTimeout\n
   *         TIMEOUTR     TEXTEN        LL_I2C_EnableSMBusTimeout
@@ -1195,7 +1235,7 @@ __STATIC_INLINE void LL_I2C_EnableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t Clock
 
 /**
   * @brief  Disable the SMBus Clock Timeout.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll TIMEOUTR     TIMOUTEN      LL_I2C_DisableSMBusTimeout\n
   *         TIMEOUTR     TEXTEN        LL_I2C_DisableSMBusTimeout
@@ -1213,7 +1253,7 @@ __STATIC_INLINE void LL_I2C_DisableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t Cloc
 
 /**
   * @brief  Check if the SMBus Clock Timeout is enabled or disabled.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll TIMEOUTR     TIMOUTEN      LL_I2C_IsEnabledSMBusTimeout\n
   *         TIMEOUTR     TEXTEN        LL_I2C_IsEnabledSMBusTimeout
@@ -1226,7 +1266,8 @@ __STATIC_INLINE void LL_I2C_DisableSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t Cloc
   */
 __STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout)
 {
-  return ((READ_BIT(I2Cx->TIMEOUTR, (I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN)) == (ClockTimeout)) ? 1UL : 0UL);
+  return ((READ_BIT(I2Cx->TIMEOUTR, (I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN)) == \
+           (ClockTimeout)) ? 1UL : 0UL);
 }
 
 /**
@@ -1443,7 +1484,7 @@ __STATIC_INLINE uint32_t LL_I2C_IsEnabledIT_TC(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Enable Error interrupts.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @note   Any of these errors will generate interrupt :
   *         Arbitration Loss (ARLO)
@@ -1463,7 +1504,7 @@ __STATIC_INLINE void LL_I2C_EnableIT_ERR(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Disable Error interrupts.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @note   Any of these errors will generate interrupt :
   *         Arbitration Loss (ARLO)
@@ -1645,7 +1686,7 @@ __STATIC_INLINE uint32_t LL_I2C_IsActiveFlag_OVR(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Indicate the status of SMBus PEC error flag in reception.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @note   RESET: Clear default value.
   *         SET: When the received PEC does not match with the PEC register content.
@@ -1660,7 +1701,7 @@ __STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_PECERR(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Indicate the status of SMBus Timeout detection flag.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @note   RESET: Clear default value.
   *         SET: When a timeout or extended clock timeout occurs.
@@ -1675,7 +1716,7 @@ __STATIC_INLINE uint32_t LL_I2C_IsActiveSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Indicate the status of SMBus alert flag.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @note   RESET: Clear default value.
   *         SET: When SMBus host configuration, SMBus alert enabled and
@@ -1782,7 +1823,7 @@ __STATIC_INLINE void LL_I2C_ClearFlag_OVR(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Clear SMBus PEC error flag.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll ICR          PECCF         LL_I2C_ClearSMBusFlag_PECERR
   * @param  I2Cx I2C Instance.
@@ -1795,7 +1836,7 @@ __STATIC_INLINE void LL_I2C_ClearSMBusFlag_PECERR(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Clear SMBus Timeout detection flag.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll ICR          TIMOUTCF      LL_I2C_ClearSMBusFlag_TIMEOUT
   * @param  I2Cx I2C Instance.
@@ -1808,7 +1849,7 @@ __STATIC_INLINE void LL_I2C_ClearSMBusFlag_TIMEOUT(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Clear SMBus Alert flag.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll ICR          ALERTCF       LL_I2C_ClearSMBusFlag_ALERT
   * @param  I2Cx I2C Instance.
@@ -1923,7 +1964,8 @@ __STATIC_INLINE uint32_t LL_I2C_GetTransferSize(I2C_TypeDef *I2Cx)
 }
 
 /**
-  * @brief  Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte.
+  * @brief  Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code
+            or next received byte.
   * @note   Usage in Slave mode only.
   * @rmtoll CR2          NACK          LL_I2C_AcknowledgeNextData
   * @param  I2Cx I2C Instance.
@@ -1964,7 +2006,8 @@ __STATIC_INLINE void LL_I2C_GenerateStopCondition(I2C_TypeDef *I2Cx)
 /**
   * @brief  Enable automatic RESTART Read request condition for 10bit address header (master mode).
   * @note   The master sends the complete 10bit slave address read sequence :
-  *         Start + 2 bytes 10bit address in Write direction + Restart + first 7 bits of 10bit address in Read direction.
+  *         Start + 2 bytes 10bit address in Write direction + Restart + first 7 bits of 10bit address
+            in Read direction.
   * @rmtoll CR2          HEAD10R       LL_I2C_EnableAuto10BitRead
   * @param  I2Cx I2C Instance.
   * @retval None
@@ -2125,9 +2168,10 @@ __STATIC_INLINE uint32_t LL_I2C_GetAddressMatchCode(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Enable internal comparison of the SMBus Packet Error byte (transmission or reception mode).
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
-  * @note   This feature is cleared by hardware when the PEC byte is transferred, or when a STOP condition or an Address Matched is received.
+  * @note   This feature is cleared by hardware when the PEC byte is transferred, or when a STOP condition
+            or an Address Matched is received.
   *         This bit has no effect when RELOAD bit is set.
   *         This bit has no effect in device mode when SBC bit is not set.
   * @rmtoll CR2          PECBYTE       LL_I2C_EnableSMBusPECCompare
@@ -2141,7 +2185,7 @@ __STATIC_INLINE void LL_I2C_EnableSMBusPECCompare(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Check if the SMBus Packet Error byte internal comparison is requested or not.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll CR2          PECBYTE       LL_I2C_IsEnabledSMBusPECCompare
   * @param  I2Cx I2C Instance.
@@ -2154,7 +2198,7 @@ __STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusPECCompare(I2C_TypeDef *I2Cx)
 
 /**
   * @brief  Get the SMBus Packet Error byte calculated.
-  * @note   Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+  * @note   The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
   *         SMBus feature is supported by the I2Cx Instance.
   * @rmtoll PECR         PEC           LL_I2C_GetSMBusPEC
   * @param  I2Cx I2C Instance.
@@ -2226,5 +2270,3 @@ void LL_I2C_StructInit(LL_I2C_InitTypeDef *I2C_InitStruct);
 #endif
 
 #endif /* STM32G4xx_LL_I2C_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_iwdg.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -337,5 +336,3 @@ __STATIC_INLINE uint32_t LL_IWDG_IsReady(IWDG_TypeDef *IWDGx)
 #endif
 
 #endif /* STM32G4xx_LL_IWDG_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_lptim.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -67,22 +66,26 @@ typedef struct
   uint32_t ClockSource;    /*!< Specifies the source of the clock used by the LPTIM instance.
                                 This parameter can be a value of @ref LPTIM_LL_EC_CLK_SOURCE.
 
-                                This feature can be modified afterwards using unitary function @ref LL_LPTIM_SetClockSource().*/
+                                This feature can be modified afterwards using unitary
+                                function @ref LL_LPTIM_SetClockSource().*/
 
   uint32_t Prescaler;      /*!< Specifies the prescaler division ratio.
                                 This parameter can be a value of @ref LPTIM_LL_EC_PRESCALER.
 
-                                This feature can be modified afterwards using using unitary function @ref LL_LPTIM_SetPrescaler().*/
+                                This feature can be modified afterwards using using unitary
+                                function @ref LL_LPTIM_SetPrescaler().*/
 
   uint32_t Waveform;       /*!< Specifies the waveform shape.
                                 This parameter can be a value of @ref LPTIM_LL_EC_OUTPUT_WAVEFORM.
 
-                                This feature can be modified afterwards using unitary function @ref LL_LPTIM_ConfigOutput().*/
+                                This feature can be modified afterwards using unitary
+                                function @ref LL_LPTIM_ConfigOutput().*/
 
   uint32_t Polarity;       /*!< Specifies waveform polarity.
                                 This parameter can be a value of @ref LPTIM_LL_EC_OUTPUT_POLARITY.
 
-                                This feature can be modified afterwards using unitary function @ref LL_LPTIM_ConfigOutput().*/
+                                This feature can be modified afterwards using unitary
+                                function @ref LL_LPTIM_ConfigOutput().*/
 } LL_LPTIM_InitTypeDef;
 
 /**
@@ -931,7 +934,8 @@ __STATIC_INLINE uint32_t LL_LPTIM_GetClockSource(LPTIM_TypeDef *LPTIMx)
 }
 
 /**
-  * @brief  Configure the active edge or edges used by the counter when the LPTIM is clocked by an external clock source.
+  * @brief  Configure the active edge or edges used by the counter when
+            the LPTIM is clocked by an external clock source.
   * @note This function must be called when the LPTIM instance is disabled.
   * @note When both external clock signal edges are considered active ones,
   *       the LPTIM must also be clocked by an internal clock source with a
@@ -1149,7 +1153,8 @@ __STATIC_INLINE void LL_LPTIM_ClearFlag_CMPOK(LPTIM_TypeDef *LPTIMx)
 }
 
 /**
-  * @brief  Informs application whether the APB bus write operation to the LPTIMx_CMP register has been successfully completed. If so, a new one can be initiated.
+  * @brief  Informs application whether the APB bus write operation to the LPTIMx_CMP register has been successfully
+            completed. If so, a new one can be initiated.
   * @rmtoll ISR          CMPOK         LL_LPTIM_IsActiveFlag_CMPOK
   * @param  LPTIMx Low-Power Timer instance
   * @retval State of bit (1 or 0).
@@ -1171,7 +1176,8 @@ __STATIC_INLINE void LL_LPTIM_ClearFlag_ARROK(LPTIM_TypeDef *LPTIMx)
 }
 
 /**
-  * @brief  Informs application whether the APB bus write operation to the LPTIMx_ARR register has been successfully completed. If so, a new one can be initiated.
+  * @brief  Informs application whether the APB bus write operation to the LPTIMx_ARR register has been successfully
+            completed. If so, a new one can be initiated.
   * @rmtoll ISR          ARROK         LL_LPTIM_IsActiveFlag_ARROK
   * @param  LPTIMx Low-Power Timer instance
   * @retval State of bit (1 or 0).
@@ -1193,7 +1199,8 @@ __STATIC_INLINE void LL_LPTIM_ClearFlag_UP(LPTIM_TypeDef *LPTIMx)
 }
 
 /**
-  * @brief  Informs the application whether the counter direction has changed from down to up (when the LPTIM instance operates in encoder mode).
+  * @brief  Informs the application whether the counter direction has changed from down to up (when the LPTIM instance
+            operates in encoder mode).
   * @rmtoll ISR          UP            LL_LPTIM_IsActiveFlag_UP
   * @param  LPTIMx Low-Power Timer instance
   * @retval State of bit (1 or 0).
@@ -1215,7 +1222,8 @@ __STATIC_INLINE void LL_LPTIM_ClearFlag_DOWN(LPTIM_TypeDef *LPTIMx)
 }
 
 /**
-  * @brief  Informs the application whether the counter direction has changed from up to down (when the LPTIM instance operates in encoder mode).
+  * @brief  Informs the application whether the counter direction has changed from up to down (when the LPTIM instance
+            operates in encoder mode).
   * @rmtoll ISR          DOWN          LL_LPTIM_IsActiveFlag_DOWN
   * @param  LPTIMx Low-Power Timer instance
   * @retval State of bit (1 or 0).
@@ -1487,5 +1495,3 @@ __STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_DOWN(LPTIM_TypeDef *LPTIMx)
 #endif
 
 #endif /* STM32G4xx_LL_LPTIM_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_lpuart.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -159,7 +158,6 @@ typedef struct
 #define LL_LPUART_ICR_NCF                  USART_ICR_NECF                /*!< Noise error detected clear flag */
 #define LL_LPUART_ICR_ORECF                USART_ICR_ORECF               /*!< Overrun error clear flag */
 #define LL_LPUART_ICR_IDLECF               USART_ICR_IDLECF              /*!< Idle line detected clear flag */
-#define LL_LPUART_ICR_TXFECF               USART_ICR_TXFECF              /*!< TX FIFO Empty clear flag */
 #define LL_LPUART_ICR_TCCF                 USART_ICR_TCCF                /*!< Transmission complete clear flag */
 #define LL_LPUART_ICR_CTSCF                USART_ICR_CTSCF               /*!< CTS clear flag */
 #define LL_LPUART_ICR_CMCF                 USART_ICR_CMCF                /*!< Character match clear flag */
@@ -577,7 +575,7 @@ __STATIC_INLINE uint32_t LL_LPUART_IsEnabledFIFO(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_SetTXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold)
 {
-  MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos);
+  ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos);
 }
 
 /**
@@ -612,7 +610,7 @@ __STATIC_INLINE uint32_t LL_LPUART_GetTXFIFOThreshold(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_SetRXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold)
 {
-  MODIFY_REG(LPUARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos);
+  ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos);
 }
 
 /**
@@ -655,8 +653,8 @@ __STATIC_INLINE uint32_t LL_LPUART_GetRXFIFOThreshold(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_ConfigFIFOsThreshold(USART_TypeDef *LPUARTx, uint32_t TXThreshold, uint32_t RXThreshold)
 {
-  MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | \
-             (RXThreshold << USART_CR3_RXFTCFG_Pos));
+  ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | \
+                    (RXThreshold << USART_CR3_RXFTCFG_Pos));
 }
 
 /**
@@ -669,7 +667,7 @@ __STATIC_INLINE void LL_LPUART_ConfigFIFOsThreshold(USART_TypeDef *LPUARTx, uint
   */
 __STATIC_INLINE void LL_LPUART_EnableInStopMode(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR1, USART_CR1_UESM);
+  ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_UESM);
 }
 
 /**
@@ -681,7 +679,7 @@ __STATIC_INLINE void LL_LPUART_EnableInStopMode(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableInStopMode(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR1, USART_CR1_UESM);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_UESM);
 }
 
 /**
@@ -704,7 +702,7 @@ __STATIC_INLINE uint32_t LL_LPUART_IsEnabledInStopMode(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableDirectionRx(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR1, USART_CR1_RE);
+  ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RE);
 }
 
 /**
@@ -715,7 +713,7 @@ __STATIC_INLINE void LL_LPUART_EnableDirectionRx(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableDirectionRx(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR1, USART_CR1_RE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RE);
 }
 
 /**
@@ -726,7 +724,7 @@ __STATIC_INLINE void LL_LPUART_DisableDirectionRx(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableDirectionTx(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR1, USART_CR1_TE);
+  ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TE);
 }
 
 /**
@@ -737,7 +735,7 @@ __STATIC_INLINE void LL_LPUART_EnableDirectionTx(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableDirectionTx(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR1, USART_CR1_TE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TE);
 }
 
 /**
@@ -755,7 +753,7 @@ __STATIC_INLINE void LL_LPUART_DisableDirectionTx(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_SetTransferDirection(USART_TypeDef *LPUARTx, uint32_t TransferDirection)
 {
-  MODIFY_REG(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection);
+  ATOMIC_MODIFY_REG(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection);
 }
 
 /**
@@ -872,7 +870,7 @@ __STATIC_INLINE uint32_t LL_LPUART_GetDataWidth(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableMuteMode(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR1, USART_CR1_MME);
+  ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_MME);
 }
 
 /**
@@ -883,7 +881,7 @@ __STATIC_INLINE void LL_LPUART_EnableMuteMode(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableMuteMode(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR1, USART_CR1_MME);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_MME);
 }
 
 /**
@@ -1875,17 +1873,6 @@ __STATIC_INLINE void LL_LPUART_ClearFlag_IDLE(USART_TypeDef *LPUARTx)
   WRITE_REG(LPUARTx->ICR, USART_ICR_IDLECF);
 }
 
-/**
-  * @brief  Clear TX FIFO Empty Flag
-  * @rmtoll ICR          TXFECF        LL_LPUART_ClearFlag_TXFE
-  * @param  LPUARTx LPUART Instance
-  * @retval None
-  */
-__STATIC_INLINE void LL_LPUART_ClearFlag_TXFE(USART_TypeDef *LPUARTx)
-{
-  WRITE_REG(LPUARTx->ICR, USART_ICR_TXFECF);
-}
-
 /**
   * @brief  Clear Transmission Complete Flag
   * @rmtoll ICR          TCCF          LL_LPUART_ClearFlag_TC
@@ -1946,7 +1933,7 @@ __STATIC_INLINE void LL_LPUART_ClearFlag_WKUP(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableIT_IDLE(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR1, USART_CR1_IDLEIE);
+  ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_IDLEIE);
 }
 
 /* Legacy define */
@@ -1960,7 +1947,7 @@ __STATIC_INLINE void LL_LPUART_EnableIT_IDLE(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
+  ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
 }
 
 /**
@@ -1971,7 +1958,7 @@ __STATIC_INLINE void LL_LPUART_EnableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableIT_TC(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR1, USART_CR1_TCIE);
+  ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TCIE);
 }
 
 /* Legacy define */
@@ -1985,7 +1972,7 @@ __STATIC_INLINE void LL_LPUART_EnableIT_TC(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableIT_TXE_TXFNF(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
+  ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
 }
 
 /**
@@ -1996,7 +1983,7 @@ __STATIC_INLINE void LL_LPUART_EnableIT_TXE_TXFNF(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableIT_PE(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR1, USART_CR1_PEIE);
+  ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_PEIE);
 }
 
 /**
@@ -2007,7 +1994,7 @@ __STATIC_INLINE void LL_LPUART_EnableIT_PE(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableIT_CM(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR1, USART_CR1_CMIE);
+  ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_CMIE);
 }
 
 /**
@@ -2018,7 +2005,7 @@ __STATIC_INLINE void LL_LPUART_EnableIT_CM(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableIT_TXFE(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR1, USART_CR1_TXFEIE);
+  ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXFEIE);
 }
 
 /**
@@ -2029,7 +2016,7 @@ __STATIC_INLINE void LL_LPUART_EnableIT_TXFE(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableIT_RXFF(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR1, USART_CR1_RXFFIE);
+  ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXFFIE);
 }
 
 /**
@@ -2044,7 +2031,7 @@ __STATIC_INLINE void LL_LPUART_EnableIT_RXFF(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableIT_ERROR(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR3, USART_CR3_EIE);
+  ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_EIE);
 }
 
 /**
@@ -2055,7 +2042,7 @@ __STATIC_INLINE void LL_LPUART_EnableIT_ERROR(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableIT_CTS(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR3, USART_CR3_CTSIE);
+  ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_CTSIE);
 }
 
 /**
@@ -2066,7 +2053,7 @@ __STATIC_INLINE void LL_LPUART_EnableIT_CTS(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableIT_WKUP(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR3, USART_CR3_WUFIE);
+  ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_WUFIE);
 }
 
 /**
@@ -2077,7 +2064,7 @@ __STATIC_INLINE void LL_LPUART_EnableIT_WKUP(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableIT_TXFT(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR3, USART_CR3_TXFTIE);
+  ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_TXFTIE);
 }
 
 /**
@@ -2088,7 +2075,7 @@ __STATIC_INLINE void LL_LPUART_EnableIT_TXFT(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableIT_RXFT(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR3, USART_CR3_RXFTIE);
+  ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_RXFTIE);
 }
 
 /**
@@ -2099,7 +2086,7 @@ __STATIC_INLINE void LL_LPUART_EnableIT_RXFT(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableIT_IDLE(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR1, USART_CR1_IDLEIE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_IDLEIE);
 }
 
 /* Legacy define */
@@ -2113,7 +2100,7 @@ __STATIC_INLINE void LL_LPUART_DisableIT_IDLE(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
 }
 
 /**
@@ -2124,7 +2111,7 @@ __STATIC_INLINE void LL_LPUART_DisableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableIT_TC(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR1, USART_CR1_TCIE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TCIE);
 }
 
 /* Legacy define */
@@ -2138,7 +2125,7 @@ __STATIC_INLINE void LL_LPUART_DisableIT_TC(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableIT_TXE_TXFNF(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
 }
 
 /**
@@ -2149,7 +2136,7 @@ __STATIC_INLINE void LL_LPUART_DisableIT_TXE_TXFNF(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableIT_PE(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR1, USART_CR1_PEIE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_PEIE);
 }
 
 /**
@@ -2160,7 +2147,7 @@ __STATIC_INLINE void LL_LPUART_DisableIT_PE(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableIT_CM(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR1, USART_CR1_CMIE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_CMIE);
 }
 
 /**
@@ -2171,7 +2158,7 @@ __STATIC_INLINE void LL_LPUART_DisableIT_CM(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableIT_TXFE(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXFEIE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXFEIE);
 }
 
 /**
@@ -2182,7 +2169,7 @@ __STATIC_INLINE void LL_LPUART_DisableIT_TXFE(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableIT_RXFF(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXFFIE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXFFIE);
 }
 
 /**
@@ -2197,7 +2184,7 @@ __STATIC_INLINE void LL_LPUART_DisableIT_RXFF(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableIT_ERROR(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR3, USART_CR3_EIE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_EIE);
 }
 
 /**
@@ -2208,7 +2195,7 @@ __STATIC_INLINE void LL_LPUART_DisableIT_ERROR(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableIT_CTS(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSIE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSIE);
 }
 
 /**
@@ -2219,7 +2206,7 @@ __STATIC_INLINE void LL_LPUART_DisableIT_CTS(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableIT_WKUP(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR3, USART_CR3_WUFIE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_WUFIE);
 }
 
 /**
@@ -2230,7 +2217,7 @@ __STATIC_INLINE void LL_LPUART_DisableIT_WKUP(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableIT_TXFT(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR3, USART_CR3_TXFTIE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_TXFTIE);
 }
 
 /**
@@ -2241,7 +2228,7 @@ __STATIC_INLINE void LL_LPUART_DisableIT_TXFT(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableIT_RXFT(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR3, USART_CR3_RXFTIE);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_RXFTIE);
 }
 
 /**
@@ -2409,7 +2396,7 @@ __STATIC_INLINE uint32_t LL_LPUART_IsEnabledIT_RXFT(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableDMAReq_RX(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR3, USART_CR3_DMAR);
+  ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAR);
 }
 
 /**
@@ -2420,7 +2407,7 @@ __STATIC_INLINE void LL_LPUART_EnableDMAReq_RX(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableDMAReq_RX(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAR);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAR);
 }
 
 /**
@@ -2442,7 +2429,7 @@ __STATIC_INLINE uint32_t LL_LPUART_IsEnabledDMAReq_RX(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_EnableDMAReq_TX(USART_TypeDef *LPUARTx)
 {
-  SET_BIT(LPUARTx->CR3, USART_CR3_DMAT);
+  ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAT);
 }
 
 /**
@@ -2453,7 +2440,7 @@ __STATIC_INLINE void LL_LPUART_EnableDMAReq_TX(USART_TypeDef *LPUARTx)
   */
 __STATIC_INLINE void LL_LPUART_DisableDMAReq_TX(USART_TypeDef *LPUARTx)
 {
-  CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAT);
+  ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAT);
 }
 
 /**
@@ -2661,4 +2648,3 @@ void        LL_LPUART_StructInit(LL_LPUART_InitTypeDef *LPUART_InitStruct);
 
 #endif /* STM32G4xx_LL_LPUART_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_opamp.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -329,7 +328,7 @@ typedef struct
   */
 
 /** @defgroup OPAMP_LL_EC_HW_DELAYS  Definitions of OPAMP hardware constraints delays
-  * @note   Only OPAMP IP HW delays are defined in OPAMP LL driver driver,
+  * @note   Only OPAMP peripheral HW delays are defined in OPAMP LL driver driver,
   *         not timeout values.
   *         For details on delays values, refer to descriptions in source code
   *         above each literal definition.
@@ -520,7 +519,7 @@ __STATIC_INLINE uint32_t LL_OPAMP_GetPGAGain(OPAMP_TypeDef *OPAMPx)
   * @rmtoll CSR      HIGHSPEEDEN     LL_OPAMP_SetPowerMode
   * @param  OPAMPx OPAMP instance
   * @param  PowerMode This parameter can be one of the following values:
-  *         @arg @ref LL_OPAMP_POWERMODE_NORMAL
+  *         @arg @ref LL_OPAMP_POWERMODE_NORMALSPEED
   *         @arg @ref LL_OPAMP_POWERMODE_HIGHSPEED
   * @retval None
   */
@@ -535,7 +534,7 @@ __STATIC_INLINE void LL_OPAMP_SetPowerMode(OPAMP_TypeDef *OPAMPx, uint32_t Power
   * @rmtoll CSR      HIGHSPEEDEN     LL_OPAMP_GetPowerMode
   * @param  OPAMPx OPAMP instance
   * @retval Returned value can be one of the following values:
-  *         @arg @ref LL_OPAMP_POWERMODE_NORMAL
+  *         @arg @ref LL_OPAMP_POWERMODE_NORMALSPEED
   *         @arg @ref LL_OPAMP_POWERMODE_HIGHSPEED
   */
 __STATIC_INLINE uint32_t LL_OPAMP_GetPowerMode(OPAMP_TypeDef *OPAMPx)
@@ -1026,4 +1025,3 @@ void        LL_OPAMP_StructInit(LL_OPAMP_InitTypeDef *OPAMP_InitStruct);
 
 #endif /* STM32G4xx_LL_OPAMP_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_pwr.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -1601,4 +1600,3 @@ ErrorStatus LL_PWR_DeInit(void);
 
 #endif /* STM32G4xx_LL_PWR_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_rcc.h

@@ -6,14 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file in
+  * the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   ******************************************************************************
   */
 
@@ -2396,6 +2394,16 @@ __STATIC_INLINE void LL_RCC_PLL_DisableDomain_ADC(void)
   CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN);
 }
 
+/**
+  * @brief  Check if PLL output mapped on ADC domain clock is enabled
+  * @rmtoll PLLCFGR      PLLPEN        LL_RCC_PLL_IsEnabledDomain_ADC
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_ADC(void)
+{
+  return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN) == (RCC_PLLCFGR_PLLPEN)) ? 1UL : 0UL);
+}
+
 /**
   * @brief  Enable PLL output mapped on 48MHz domain clock
   * @rmtoll PLLCFGR      PLLQEN        LL_RCC_PLL_EnableDomain_48M
@@ -2420,6 +2428,16 @@ __STATIC_INLINE void LL_RCC_PLL_DisableDomain_48M(void)
   CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN);
 }
 
+/**
+  * @brief  Check if PLL output mapped on 48MHz domain clock is enabled
+  * @rmtoll PLLCFGR      PLLQEN        LL_RCC_PLL_IsEnabledDomain_48M
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_48M(void)
+{
+  return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN) == (RCC_PLLCFGR_PLLQEN)) ? 1UL : 0UL);
+}
+
 /**
   * @brief  Enable PLL output mapped on SYSCLK domain
   * @rmtoll PLLCFGR      PLLREN        LL_RCC_PLL_EnableDomain_SYS
@@ -2444,6 +2462,16 @@ __STATIC_INLINE void LL_RCC_PLL_DisableDomain_SYS(void)
   CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN);
 }
 
+/**
+  * @brief  Check if PLL output mapped on SYSCLK domain clock is enabled
+  * @rmtoll PLLCFGR      PLLREN        LL_RCC_PLL_IsEnabledDomain_SYS
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_RCC_PLL_IsEnabledDomain_SYS(void)
+{
+  return ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN) == (RCC_PLLCFGR_PLLREN)) ? 1UL : 0UL);
+}
+
 /**
   * @}
   */
@@ -2968,4 +2996,3 @@ uint32_t    LL_RCC_GetQUADSPIClockFreq(uint32_t QUADSPIxSource);
 
 #endif /* STM32G4xx_LL_RCC_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_rng.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -57,8 +56,8 @@ typedef struct
 {
   uint32_t         ClockErrorDetection; /*!< Clock error detection.
                                       This parameter can be one value of @ref RNG_LL_CED.
-
-                                      This parameter can be modified using unitary functions @ref LL_RNG_EnableClkErrorDetect(). */
+                                      This parameter can be modified using unitary
+                                      functions @ref LL_RNG_EnableClkErrorDetect(). */
 } LL_RNG_InitTypeDef;
 
 /**
@@ -398,4 +397,3 @@ ErrorStatus LL_RNG_DeInit(RNG_TypeDef *RNGx);
 
 #endif /* __STM32G4xx_LL_RNG_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_rtc.h

@@ -6,12 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -5568,5 +5568,3 @@ ErrorStatus LL_RTC_WaitForSynchro(RTC_TypeDef *RTCx);
 #endif
 
 #endif /* STM32G4xx_LL_RTC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_spi.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -1333,7 +1332,7 @@ __STATIC_INLINE uint32_t LL_SPI_DMA_GetRegAddr(SPI_TypeDef *SPIx)
   */
 __STATIC_INLINE uint8_t LL_SPI_ReceiveData8(SPI_TypeDef *SPIx)
 {
-  return (uint8_t)(READ_REG(SPIx->DR));
+  return (*((__IO uint8_t *)&SPIx->DR));
 }
 
 /**
@@ -2283,4 +2282,3 @@ void        LL_I2S_ConfigPrescaler(SPI_TypeDef *SPIx, uint32_t PrescalerLinear,
 
 #endif /* STM32G4xx_LL_SPI_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_system.h

@@ -3,6 +3,17 @@
   * @file    stm32g4xx_ll_system.h
   * @author  MCD Application Team
   * @brief   Header file of SYSTEM LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
   @verbatim
   ==============================================================================
                      ##### How to use this driver #####
@@ -17,17 +28,6 @@
 
   @endverbatim
   ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
   */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
@@ -1514,4 +1514,3 @@ __STATIC_INLINE void LL_FLASH_DisableSleepPowerDown(void)
 
 #endif /* __STM32G4xx_LL_SYSTEM_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_tim.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -215,24 +214,29 @@ typedef struct
   uint16_t Prescaler;         /*!< Specifies the prescaler value used to divide the TIM clock.
                                    This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
 
-                                   This feature can be modified afterwards using unitary function @ref LL_TIM_SetPrescaler().*/
+                                   This feature can be modified afterwards using unitary function
+                                   @ref LL_TIM_SetPrescaler().*/
 
   uint32_t CounterMode;       /*!< Specifies the counter mode.
                                    This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE.
 
-                                   This feature can be modified afterwards using unitary function @ref LL_TIM_SetCounterMode().*/
+                                   This feature can be modified afterwards using unitary function
+                                   @ref LL_TIM_SetCounterMode().*/
 
   uint32_t Autoreload;        /*!< Specifies the auto reload value to be loaded into the active
                                    Auto-Reload Register at the next update event.
                                    This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
-                                   Some timer instances may support 32 bits counters. In that case this parameter must be a number between 0x0000 and 0xFFFFFFFF.
+                                   Some timer instances may support 32 bits counters. In that case this parameter must
+                                   be a number between 0x0000 and 0xFFFFFFFF.
 
-                                   This feature can be modified afterwards using unitary function @ref LL_TIM_SetAutoReload().*/
+                                   This feature can be modified afterwards using unitary function
+                                   @ref LL_TIM_SetAutoReload().*/
 
   uint32_t ClockDivision;     /*!< Specifies the clock division.
                                    This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION.
 
-                                   This feature can be modified afterwards using unitary function @ref LL_TIM_SetClockDivision().*/
+                                   This feature can be modified afterwards using unitary function
+                                   @ref LL_TIM_SetClockDivision().*/
 
   uint32_t RepetitionCounter;  /*!< Specifies the repetition counter value. Each time the RCR downcounter
                                    reaches zero, an update event is generated and counting restarts
@@ -240,10 +244,13 @@ typedef struct
                                    This means in PWM mode that (N+1) corresponds to:
                                       - the number of PWM periods in edge-aligned mode
                                       - the number of half PWM period in center-aligned mode
-                                   GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
-                                   Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.
+                                   GP timers: this parameter must be a number between Min_Data = 0x00 and
+                                   Max_Data = 0xFF.
+                                   Advanced timers: this parameter must be a number between Min_Data = 0x0000 and
+                                   Max_Data = 0xFFFF.
 
-                                   This feature can be modified afterwards using unitary function @ref LL_TIM_SetRepetitionCounter().*/
+                                   This feature can be modified afterwards using unitary function
+                                   @ref LL_TIM_SetRepetitionCounter().*/
 } LL_TIM_InitTypeDef;
 
 /**
@@ -254,43 +261,51 @@ typedef struct
   uint32_t OCMode;        /*!< Specifies the output mode.
                                This parameter can be a value of @ref TIM_LL_EC_OCMODE.
 
-                               This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetMode().*/
+                               This feature can be modified afterwards using unitary function
+                               @ref LL_TIM_OC_SetMode().*/
 
   uint32_t OCState;       /*!< Specifies the TIM Output Compare state.
                                This parameter can be a value of @ref TIM_LL_EC_OCSTATE.
 
-                               This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
+                               This feature can be modified afterwards using unitary functions
+                               @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
 
   uint32_t OCNState;      /*!< Specifies the TIM complementary Output Compare state.
                                This parameter can be a value of @ref TIM_LL_EC_OCSTATE.
 
-                               This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
+                               This feature can be modified afterwards using unitary functions
+                               @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
 
   uint32_t CompareValue;  /*!< Specifies the Compare value to be loaded into the Capture Compare Register.
                                This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
 
-                               This feature can be modified afterwards using unitary function LL_TIM_OC_SetCompareCHx (x=1..6).*/
+                               This feature can be modified afterwards using unitary function
+                               LL_TIM_OC_SetCompareCHx (x=1..6).*/
 
   uint32_t OCPolarity;    /*!< Specifies the output polarity.
                                This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY.
 
-                               This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/
+                               This feature can be modified afterwards using unitary function
+                               @ref LL_TIM_OC_SetPolarity().*/
 
   uint32_t OCNPolarity;   /*!< Specifies the complementary output polarity.
                                This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY.
 
-                               This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/
+                               This feature can be modified afterwards using unitary function
+                               @ref LL_TIM_OC_SetPolarity().*/
 
 
   uint32_t OCIdleState;   /*!< Specifies the TIM Output Compare pin state during Idle state.
                                This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE.
 
-                               This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/
+                               This feature can be modified afterwards using unitary function
+                               @ref LL_TIM_OC_SetIdleState().*/
 
   uint32_t OCNIdleState;  /*!< Specifies the TIM Output Compare pin state during Idle state.
                                This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE.
 
-                               This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/
+                               This feature can be modified afterwards using unitary function
+                               @ref LL_TIM_OC_SetIdleState().*/
 } LL_TIM_OC_InitTypeDef;
 
 /**
@@ -303,22 +318,26 @@ typedef struct
   uint32_t ICPolarity;    /*!< Specifies the active edge of the input signal.
                                This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
 
-                               This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+                               This feature can be modified afterwards using unitary function
+                               @ref LL_TIM_IC_SetPolarity().*/
 
   uint32_t ICActiveInput; /*!< Specifies the input.
                                This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
 
-                               This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
+                               This feature can be modified afterwards using unitary function
+                               @ref LL_TIM_IC_SetActiveInput().*/
 
   uint32_t ICPrescaler;   /*!< Specifies the Input Capture Prescaler.
                                This parameter can be a value of @ref TIM_LL_EC_ICPSC.
 
-                               This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+                               This feature can be modified afterwards using unitary function
+                               @ref LL_TIM_IC_SetPrescaler().*/
 
   uint32_t ICFilter;      /*!< Specifies the input capture filter.
                                This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
 
-                               This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+                               This feature can be modified afterwards using unitary function
+                               @ref LL_TIM_IC_SetFilter().*/
 } LL_TIM_IC_InitTypeDef;
 
 
@@ -330,47 +349,56 @@ typedef struct
   uint32_t EncoderMode;     /*!< Specifies the encoder resolution (x2 or x4).
                                  This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE.
 
-                                 This feature can be modified afterwards using unitary function @ref LL_TIM_SetEncoderMode().*/
+                                 This feature can be modified afterwards using unitary function
+                                 @ref LL_TIM_SetEncoderMode().*/
 
   uint32_t IC1Polarity;     /*!< Specifies the active edge of TI1 input.
                                  This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
 
-                                 This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+                                 This feature can be modified afterwards using unitary function
+                                 @ref LL_TIM_IC_SetPolarity().*/
 
   uint32_t IC1ActiveInput;  /*!< Specifies the TI1 input source
                                  This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
 
-                                 This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
+                                 This feature can be modified afterwards using unitary function
+                                 @ref LL_TIM_IC_SetActiveInput().*/
 
   uint32_t IC1Prescaler;    /*!< Specifies the TI1 input prescaler value.
                                  This parameter can be a value of @ref TIM_LL_EC_ICPSC.
 
-                                 This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+                                 This feature can be modified afterwards using unitary function
+                                 @ref LL_TIM_IC_SetPrescaler().*/
 
   uint32_t IC1Filter;       /*!< Specifies the TI1 input filter.
                                  This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
 
-                                 This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+                                 This feature can be modified afterwards using unitary function
+                                 @ref LL_TIM_IC_SetFilter().*/
 
   uint32_t IC2Polarity;      /*!< Specifies the active edge of TI2 input.
                                  This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
 
-                                 This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+                                 This feature can be modified afterwards using unitary function
+                                 @ref LL_TIM_IC_SetPolarity().*/
 
   uint32_t IC2ActiveInput;  /*!< Specifies the TI2 input source
                                  This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
 
-                                 This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
+                                 This feature can be modified afterwards using unitary function
+                                 @ref LL_TIM_IC_SetActiveInput().*/
 
   uint32_t IC2Prescaler;    /*!< Specifies the TI2 input prescaler value.
                                  This parameter can be a value of @ref TIM_LL_EC_ICPSC.
 
-                                 This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+                                 This feature can be modified afterwards using unitary function
+                                 @ref LL_TIM_IC_SetPrescaler().*/
 
   uint32_t IC2Filter;       /*!< Specifies the TI2 input filter.
                                  This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
 
-                                 This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+                                 This feature can be modified afterwards using unitary function
+                                 @ref LL_TIM_IC_SetFilter().*/
 
 } LL_TIM_ENCODER_InitTypeDef;
 
@@ -383,26 +411,31 @@ typedef struct
   uint32_t IC1Polarity;        /*!< Specifies the active edge of TI1 input.
                                     This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
 
-                                    This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+                                    This feature can be modified afterwards using unitary function
+                                    @ref LL_TIM_IC_SetPolarity().*/
 
   uint32_t IC1Prescaler;       /*!< Specifies the TI1 input prescaler value.
                                     Prescaler must be set to get a maximum counter period longer than the
                                     time interval between 2 consecutive changes on the Hall inputs.
                                     This parameter can be a value of @ref TIM_LL_EC_ICPSC.
 
-                                    This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+                                    This feature can be modified afterwards using unitary function
+                                    @ref LL_TIM_IC_SetPrescaler().*/
 
   uint32_t IC1Filter;          /*!< Specifies the TI1 input filter.
-                                    This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
+                                    This parameter can be a value of
+                                    @ref TIM_LL_EC_IC_FILTER.
 
-                                    This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+                                    This feature can be modified afterwards using unitary function
+                                    @ref LL_TIM_IC_SetFilter().*/
 
   uint32_t CommutationDelay;   /*!< Specifies the compare value to be loaded into the Capture Compare Register.
                                     A positive pulse (TRGO event) is generated with a programmable delay every time
                                     a change occurs on the Hall inputs.
                                     This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.
 
-                                    This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetCompareCH2().*/
+                                    This feature can be modified afterwards using unitary function
+                                    @ref LL_TIM_OC_SetCompareCH2().*/
 } LL_TIM_HALLSENSOR_InitTypeDef;
 
 /**
@@ -413,97 +446,121 @@ typedef struct
   uint32_t OSSRState;            /*!< Specifies the Off-State selection used in Run mode.
                                       This parameter can be a value of @ref TIM_LL_EC_OSSR
 
-                                      This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates()
+                                      This feature can be modified afterwards using unitary function
+                                      @ref LL_TIM_SetOffStates()
 
-                                      @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */
+                                      @note This bit-field cannot be modified as long as LOCK level 2 has been
+                                       programmed. */
 
   uint32_t OSSIState;            /*!< Specifies the Off-State used in Idle state.
                                       This parameter can be a value of @ref TIM_LL_EC_OSSI
 
-                                      This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates()
+                                      This feature can be modified afterwards using unitary function
+                                      @ref LL_TIM_SetOffStates()
 
-                                      @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */
+                                      @note This bit-field cannot be modified as long as LOCK level 2 has been
+                                      programmed. */
 
   uint32_t LockLevel;            /*!< Specifies the LOCK level parameters.
                                       This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL
 
-                                      @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR register
-                                            has been written, their content is frozen until the next reset.*/
+                                      @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR
+                                      register has been written, their content is frozen until the next reset.*/
 
   uint8_t DeadTime;              /*!< Specifies the delay time between the switching-off and the
                                       switching-on of the outputs.
                                       This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF.
 
-                                      This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetDeadTime()
+                                      This feature can be modified afterwards using unitary function
+                                      @ref LL_TIM_OC_SetDeadTime()
 
-                                      @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been programmed. */
+                                      @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been
+                                       programmed. */
 
   uint16_t BreakState;           /*!< Specifies whether the TIM Break input is enabled or not.
                                       This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE
 
-                                      This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK()
+                                      This feature can be modified afterwards using unitary functions
+                                      @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK()
 
-                                      @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+                                      @note This bit-field can not be modified as long as LOCK level 1 has been
+                                      programmed. */
 
   uint32_t BreakPolarity;        /*!< Specifies the TIM Break Input pin polarity.
                                       This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY
 
-                                      This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK()
+                                      This feature can be modified afterwards using unitary function
+                                      @ref LL_TIM_ConfigBRK()
 
-                                      @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+                                      @note This bit-field can not be modified as long as LOCK level 1 has been
+                                      programmed. */
 
   uint32_t BreakFilter;          /*!< Specifies the TIM Break Filter.
                                       This parameter can be a value of @ref TIM_LL_EC_BREAK_FILTER
 
-                                      This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK()
+                                      This feature can be modified afterwards using unitary function
+                                      @ref LL_TIM_ConfigBRK()
 
-                                      @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+                                      @note This bit-field can not be modified as long as LOCK level 1 has been
+                                      programmed. */
 
   uint32_t BreakAFMode;           /*!< Specifies the alternate function mode of the break input.
                                       This parameter can be a value of @ref TIM_LL_EC_BREAK_AFMODE
 
-                                      This feature can be modified afterwards using unitary functions @ref LL_TIM_ConfigBRK()
+                                      This feature can be modified afterwards using unitary functions
+                                      @ref LL_TIM_ConfigBRK()
 
                                       @note Bidirectional break input is only supported by advanced timers instances.
 
-                                      @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+                                      @note This bit-field can not be modified as long as LOCK level 1 has been
+                                      programmed. */
 
   uint32_t Break2State;          /*!< Specifies whether the TIM Break2 input is enabled or not.
                                       This parameter can be a value of @ref TIM_LL_EC_BREAK2_ENABLE
 
-                                      This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableBRK2() or @ref LL_TIM_DisableBRK2()
+                                      This feature can be modified afterwards using unitary functions
+                                      @ref LL_TIM_EnableBRK2() or @ref LL_TIM_DisableBRK2()
 
-                                      @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+                                      @note This bit-field can not be modified as long as LOCK level 1 has been
+                                      programmed. */
 
   uint32_t Break2Polarity;        /*!< Specifies the TIM Break2 Input pin polarity.
                                       This parameter can be a value of @ref TIM_LL_EC_BREAK2_POLARITY
 
-                                      This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK2()
+                                      This feature can be modified afterwards using unitary function
+                                      @ref LL_TIM_ConfigBRK2()
 
-                                      @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+                                      @note This bit-field can not be modified as long as LOCK level 1 has been
+                                      programmed. */
 
   uint32_t Break2Filter;          /*!< Specifies the TIM Break2 Filter.
                                       This parameter can be a value of @ref TIM_LL_EC_BREAK2_FILTER
 
-                                      This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK2()
+                                      This feature can be modified afterwards using unitary function
+                                      @ref LL_TIM_ConfigBRK2()
 
-                                      @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+                                      @note This bit-field can not be modified as long as LOCK level 1 has been
+                                      programmed. */
 
   uint32_t Break2AFMode;          /*!< Specifies the alternate function mode of the break2 input.
                                       This parameter can be a value of @ref TIM_LL_EC_BREAK2_AFMODE
 
-                                      This feature can be modified afterwards using unitary functions @ref LL_TIM_ConfigBRK2()
+                                      This feature can be modified afterwards using unitary functions
+                                      @ref LL_TIM_ConfigBRK2()
 
                                       @note Bidirectional break input is only supported by advanced timers instances.
 
-                                      @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+                                      @note This bit-field can not be modified as long as LOCK level 1 has been
+                                      programmed. */
 
   uint32_t AutomaticOutput;      /*!< Specifies whether the TIM Automatic Output feature is enabled or not.
                                       This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE
 
-                                      This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput()
+                                      This feature can be modified afterwards using unitary functions
+                                      @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput()
 
-                                      @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+                                      @note This bit-field can not be modified as long as LOCK level 1 has been
+                                      programmed. */
 } LL_TIM_BDTR_InitTypeDef;
 
 /**
@@ -878,8 +935,8 @@ typedef struct
 #define LL_TIM_SLAVEMODE_GATED                 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0)   /*!< Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high */
 #define LL_TIM_SLAVEMODE_TRIGGER               (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1)   /*!< Trigger Mode - The counter starts at a rising edge of the trigger TRGI */
 #define LL_TIM_SLAVEMODE_COMBINED_RESETTRIGGER TIM_SMCR_SMS_3                      /*!< Combined reset + trigger mode - Rising edge of the selected trigger input (TRGI)  reinitializes the counter, generates an update of the registers and starts the counter */
-#define LL_TIM_SLAVEMODE_COMBINED_GATEDRESET   (TIM_SMCR_SMS_3 | TIM_SMCR_SMS_0)   /*!< Combined gated + reset mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops and is reset) as soon as the trigger becomes low.
-                                                                                        Both start and stop of the counter are controlled. */
+#define LL_TIM_SLAVEMODE_COMBINED_GATEDRESET   (TIM_SMCR_SMS_3 | TIM_SMCR_SMS_0)   /*!< Combined gated + reset mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops and is reset) as soon as the trigger becomes low.Both startand stop of
+                                                                                        the counter are controlled. */
 /**
   * @}
   */
@@ -1815,10 +1872,17 @@ typedef struct
   * @retval DTG[0:7]
   */
 #define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__)  \
-  ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__))))    ? (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__)))  & DT_DELAY_1) :                                               \
-    (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__))))  ? (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\
-    (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__))))  ? (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\
-    (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\
+  ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__))))    ?  \
+    (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__)))  & DT_DELAY_1) :      \
+    (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__))))  ?  \
+    (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__),   \
+                                                 (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\
+    (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__))))  ?  \
+    (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__),  \
+                                                 (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\
+    (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ?  \
+    (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__),  \
+                                                 (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\
     0U)
 
 /**
@@ -1843,7 +1907,8 @@ typedef struct
   ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U)
 
 /**
-  * @brief  HELPER macro calculating the auto-reload value, with dithering feature enabled, to achieve the required output signal frequency.
+  * @brief  HELPER macro calculating the auto-reload value, with dithering feature enabled, to achieve the required
+  *         output signal frequency.
   * @note ex: @ref __LL_TIM_CALC_ARR_DITHER (1000000, @ref LL_TIM_GetPrescaler (), 10000);
   * @param  __TIMCLK__ timer input clock frequency (in Hz)
   * @param  __PSC__ prescaler
@@ -1851,10 +1916,12 @@ typedef struct
   * @retval  Auto-reload value  (between Min_Data=0 and Max_Data=65535)
   */
 #define __LL_TIM_CALC_ARR_DITHER(__TIMCLK__, __PSC__, __FREQ__) \
-  ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ?   (uint32_t)((((uint64_t)(__TIMCLK__) * 16U/((__FREQ__) * ((__PSC__) + 1U))) - 16U)) : 0U)
+  ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? \
+   (uint32_t)((((uint64_t)(__TIMCLK__) * 16U/((__FREQ__) * ((__PSC__) + 1U))) - 16U)) : 0U)
 
 /**
-  * @brief  HELPER macro calculating the compare value required to achieve the required timer output compare active/inactive delay.
+  * @brief  HELPER macro calculating the compare value required to achieve the required timer output compare
+  *         active/inactive delay.
   * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10);
   * @param  __TIMCLK__ timer input clock frequency (in Hz)
   * @param  __PSC__ prescaler
@@ -1866,7 +1933,8 @@ typedef struct
               / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U))))
 
 /**
-  * @brief  HELPER macro calculating the compare value, with dithering feature enabled, to achieve the required timer output compare active/inactive delay.
+  * @brief  HELPER macro calculating the compare value, with dithering feature enabled, to achieve the required timer
+  *         output compare active/inactive delay.
   * @note ex: @ref __LL_TIM_CALC_DELAY_DITHER (1000000, @ref LL_TIM_GetPrescaler (), 10);
   * @param  __TIMCLK__ timer input clock frequency (in Hz)
   * @param  __PSC__ prescaler
@@ -1878,7 +1946,8 @@ typedef struct
               / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U))))
 
 /**
-  * @brief  HELPER macro calculating the auto-reload value to achieve the required pulse duration (when the timer operates in one pulse mode).
+  * @brief  HELPER macro calculating the auto-reload value to achieve the required pulse duration
+  *         (when the timer operates in one pulse mode).
   * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20);
   * @param  __TIMCLK__ timer input clock frequency (in Hz)
   * @param  __PSC__ prescaler
@@ -1891,7 +1960,8 @@ typedef struct
               + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__))))
 
 /**
-  * @brief  HELPER macro calculating the auto-reload value, with dithering feature enabled, to achieve the required pulse duration (when the timer operates in one pulse mode).
+  * @brief  HELPER macro calculating the auto-reload value, with dithering feature enabled, to achieve the required
+  *         pulse duration (when the timer operates in one pulse mode).
   * @note ex: @ref __LL_TIM_CALC_PULSE_DITHER (1000000, @ref LL_TIM_GetPrescaler (), 10, 20);
   * @param  __TIMCLK__ timer input clock frequency (in Hz)
   * @param  __PSC__ prescaler
@@ -2148,7 +2218,8 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(TIM_TypeDef *TIMx)
 }
 
 /**
-  * @brief  Set the division ratio between the timer clock  and the sampling clock used by the dead-time generators (when supported) and the digital filters.
+  * @brief  Set the division ratio between the timer clock  and the sampling clock used by the dead-time generators
+  *         (when supported) and the digital filters.
   * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check
   *       whether or not the clock division feature is supported by the timer
   *       instance.
@@ -2166,7 +2237,8 @@ __STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDi
 }
 
 /**
-  * @brief  Get the actual division ratio between the timer clock  and the sampling clock used by the dead-time generators (when supported) and the digital filters.
+  * @brief  Get the actual division ratio between the timer clock  and the sampling clock used by the dead-time
+  *         generators (when supported) and the digital filters.
   * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check
   *       whether or not the clock division feature is supported by the timer
   *       instance.
@@ -2257,7 +2329,8 @@ __STATIC_INLINE uint32_t LL_TIM_GetPrescaler(TIM_TypeDef *TIMx)
   * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check
   *       whether or not a timer instance supports a 32 bits counter.
   * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter
-  *       In case dithering is activated,macro __LL_TIM_CALC_ARR_DITHER can be used instead, to calculate the AutoReload parameter.
+  *       In case dithering is activated,macro __LL_TIM_CALC_ARR_DITHER can be used instead, to calculate the AutoReload
+  *       parameter.
   * @rmtoll ARR          ARR           LL_TIM_SetAutoReload
   * @param  TIMx Timer instance
   * @param  AutoReload between Min_Data=0 and Max_Data=65535
@@ -2312,7 +2385,8 @@ __STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31).
-  * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read in an atomic way.
+  * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read
+  *       in an atomic way.
   * @rmtoll CR1          UIFREMAP      LL_TIM_EnableUIFRemap
   * @param  TIMx Timer instance
   * @retval None
@@ -2345,7 +2419,7 @@ __STATIC_INLINE uint32_t LL_TIM_IsActiveUIFCPY(uint32_t Counter)
 
 /**
   * @brief  Enable dithering.
-  * @note Macro @ref  IS_TIM_DITHERING_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_DITHERING_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides dithering.
   * @rmtoll CR1          DITHEN          LL_TIM_EnableDithering
   * @param  TIMx Timer instance
@@ -2358,7 +2432,7 @@ __STATIC_INLINE void LL_TIM_EnableDithering(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Disable dithering.
-  * @note Macro @ref  IS_TIM_DITHERING_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_DITHERING_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides dithering.
   * @rmtoll CR1          DITHEN          LL_TIM_DisableDithering
   * @param  TIMx Timer instance
@@ -2664,7 +2738,7 @@ __STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint
 {
   uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
   __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
-  MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M  | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]),  Mode << SHIFT_TAB_OCxx[iChannel]);
+  MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M  | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]);
 }
 
 /**
@@ -2705,7 +2779,7 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetMode(TIM_TypeDef *TIMx, uint32_t Channel)
 {
   uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
   const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
-  return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M  | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]);
+  return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]);
 }
 
 /**
@@ -3091,7 +3165,8 @@ __STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Ch
 }
 
 /**
-  * @brief  Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of the Ocx and OCxN signals).
+  * @brief  Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of
+  *         the Ocx and OCxN signals).
   * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
   *       dead-time insertion feature is supported by a timer instance.
   * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter
@@ -3380,7 +3455,7 @@ __STATIC_INLINE uint32_t LL_TIM_OC_GetPulseWidthPrescaler(TIM_TypeDef *TIMx)
   */
 __STATIC_INLINE void LL_TIM_OC_SetPulseWidth(TIM_TypeDef *TIMx, uint32_t PulseWidth)
 {
-  MODIFY_REG(TIMx->ECR, TIM_ECR_PW, PulseWidth);
+  MODIFY_REG(TIMx->ECR, TIM_ECR_PW, PulseWidth << TIM_ECR_PW_Pos);
 }
 
 /**
@@ -3444,7 +3519,8 @@ __STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint3
   uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
   __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
   MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]),
-             ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S))  << SHIFT_TAB_ICxx[iChannel]);
+             ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S))                \
+             << SHIFT_TAB_ICxx[iChannel]);
   MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]),
              (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]);
 }
@@ -4703,7 +4779,7 @@ __STATIC_INLINE void LL_TIM_SetBreakInputSourcePolarity(TIM_TypeDef *TIMx, uint3
 }
 /**
   * @brief  Enable asymmetrical deadtime.
-  * @note Macro @ref  IS_TIM_DEADTIME_ASYMMETRICAL_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_DEADTIME_ASYMMETRICAL_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides asymmetrical deadtime.
   * @rmtoll DTR2          DTAE          LL_TIM_EnableAsymmetricalDeadTime
   * @param  TIMx Timer instance
@@ -4716,7 +4792,7 @@ __STATIC_INLINE void LL_TIM_EnableAsymmetricalDeadTime(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Disable asymmetrical dead-time.
-  * @note Macro @ref  IS_TIM_DEADTIME_ASYMMETRICAL_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_DEADTIME_ASYMMETRICAL_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides asymmetrical deadtime.
   * @rmtoll DTR2          DTAE          LL_TIM_DisableAsymmetricalDeadTime
   * @param  TIMx Timer instance
@@ -4741,7 +4817,8 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledAsymmetricalDeadTime(TIM_TypeDef *TIMx)
 }
 
 /**
-  * @brief  Set the falling edge dead-time delay (delay inserted between the falling edge of the OCxREF signal and the rising edge of OCxN signals).
+  * @brief  Set the falling edge dead-time delay (delay inserted between the falling edge of the OCxREF signal and the
+  *         rising edge of OCxN signals).
   * @note Macro IS_TIM_DEADTIME_ASYMMETRICAL_INSTANCE(TIMx) can be used to check whether or not
   *       asymmetrical dead-time insertion feature is supported by a timer instance.
   * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter
@@ -4758,7 +4835,8 @@ __STATIC_INLINE void LL_TIM_SetFallingDeadTime(TIM_TypeDef *TIMx, uint32_t DeadT
 }
 
 /**
-  * @brief  Get the falling edge dead-time delay (delay inserted between the falling edge of the OCxREF signal and the rising edge of OCxN signals).
+  * @brief  Get the falling edge dead-time delay (delay inserted between the falling edge of the OCxREF signal and
+  *         the rising edge of OCxN signals).
   * @note Macro IS_TIM_DEADTIME_ASYMMETRICAL_INSTANCE(TIMx) can be used to check whether or not
   *       asymmetrical dead-time insertion feature is supported by a timer instance.
   * @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been programmed
@@ -4774,7 +4852,7 @@ __STATIC_INLINE uint32_t LL_TIM_GetFallingDeadTime(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Enable deadtime preload.
-  * @note Macro @ref  IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides deadtime preload.
   * @rmtoll DTR2          DTPE          LL_TIM_EnableDeadTimePreload
   * @param  TIMx Timer instance
@@ -4787,7 +4865,7 @@ __STATIC_INLINE void LL_TIM_EnableDeadTimePreload(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Disable dead-time preload.
-  * @note Macro @ref  IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides deadtime preload.
   * @rmtoll DTR2          DTPE          LL_TIM_DisableDeadTimePreload
   * @param  TIMx Timer instance
@@ -5317,9 +5395,6 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledHSE32(TIM_TypeDef *TIMx)
 {
   return ((READ_BIT(TIMx->OR, TIM_OR_HSE32EN) == (TIM_OR_HSE32EN)) ? 1UL : 0UL);
 }
-/**
-  * @}
-  */
 
 /**
   * @}
@@ -5617,7 +5692,8 @@ __STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx)
 }
 
 /**
-  * @brief  Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set (Capture/Compare 1 interrupt is pending).
+  * @brief  Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set
+  *         (Capture/Compare 1 interrupt is pending).
   * @rmtoll SR           CC1OF         LL_TIM_IsActiveFlag_CC1OVR
   * @param  TIMx Timer instance
   * @retval State of bit (1 or 0).
@@ -5639,7 +5715,8 @@ __STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx)
 }
 
 /**
-  * @brief  Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set (Capture/Compare 2 over-capture interrupt is pending).
+  * @brief  Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set
+  *         (Capture/Compare 2 over-capture interrupt is pending).
   * @rmtoll SR           CC2OF         LL_TIM_IsActiveFlag_CC2OVR
   * @param  TIMx Timer instance
   * @retval State of bit (1 or 0).
@@ -5661,7 +5738,8 @@ __STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx)
 }
 
 /**
-  * @brief  Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set (Capture/Compare 3 over-capture interrupt is pending).
+  * @brief  Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set
+  *         (Capture/Compare 3 over-capture interrupt is pending).
   * @rmtoll SR           CC3OF         LL_TIM_IsActiveFlag_CC3OVR
   * @param  TIMx Timer instance
   * @retval State of bit (1 or 0).
@@ -5683,7 +5761,8 @@ __STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx)
 }
 
 /**
-  * @brief  Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set (Capture/Compare 4 over-capture interrupt is pending).
+  * @brief  Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set
+  *         (Capture/Compare 4 over-capture interrupt is pending).
   * @rmtoll SR           CC4OF         LL_TIM_IsActiveFlag_CC4OVR
   * @param  TIMx Timer instance
   * @retval State of bit (1 or 0).
@@ -5769,7 +5848,7 @@ __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_IERR(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Clear the direction change interrupt flag (DIRF).
-  * @note Macro @ref  IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides encoder interrupt management.
   * @rmtoll SR           DIRF           LL_TIM_ClearFlag_DIR
   * @param  TIMx Timer instance
@@ -5782,7 +5861,7 @@ __STATIC_INLINE void LL_TIM_ClearFlag_DIR(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Indicate whether direction change interrupt flag (DIRF) is set (direction change interrupt is pending).
-  * @note Macro @ref  IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides encoder interrupt management.
   * @rmtoll SR           DIRF           LL_TIM_IsActiveFlag_DIR
   * @param  TIMx Timer instance
@@ -5795,7 +5874,7 @@ __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_DIR(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Clear the index interrupt flag (IDXF).
-  * @note Macro @ref  IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides encoder interrupt management.
   * @rmtoll SR           IDXF           LL_TIM_ClearFlag_IDX
   * @param  TIMx Timer instance
@@ -5808,7 +5887,7 @@ __STATIC_INLINE void LL_TIM_ClearFlag_IDX(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Indicate whether index interrupt flag (IDXF) is set (index interrupt is pending).
-  * @note Macro @ref  IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides encoder interrupt management.
   * @rmtoll SR           IDXF           LL_TIM_IsActiveFlag_IDX
   * @param  TIMx Timer instance
@@ -6169,7 +6248,7 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_IERR(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Enable direction change interrupt (DIRIE).
-  * @note Macro @ref  IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides encoder interrupt management.
   * @rmtoll DIER         DIRIE           LL_TIM_EnableIT_DIR
   * @param  TIMx Timer instance
@@ -6182,7 +6261,7 @@ __STATIC_INLINE void LL_TIM_EnableIT_DIR(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Disable direction change interrupt (DIRIE).
-  * @note Macro @ref  IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides encoder interrupt management.
   * @rmtoll DIER         DIRIE           LL_TIM_DisableIT_DIR
   * @param  TIMx Timer instance
@@ -6195,7 +6274,7 @@ __STATIC_INLINE void LL_TIM_DisableIT_DIR(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Indicates whether the direction change interrupt (DIRIE) is enabled.
-  * @note Macro @ref  IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides encoder interrupt management.
   * @rmtoll DIER         DIRIE           LL_TIM_IsEnabledIT_DIR
   * @param  TIMx Timer instance
@@ -6208,7 +6287,7 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_DIR(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Enable index interrupt (IDXIE).
-  * @note Macro @ref  IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides encoder interrupt management.
   * @rmtoll DIER         IDXIE           LL_TIM_EnableIT_IDX
   * @param  TIMx Timer instance
@@ -6221,7 +6300,7 @@ __STATIC_INLINE void LL_TIM_EnableIT_IDX(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Disable index interrupt (IDXIE).
-  * @note Macro @ref  IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides encoder interrupt management.
   * @rmtoll DIER         IDXIE           LL_TIM_DisableIT_IDX
   * @param  TIMx Timer instance
@@ -6234,7 +6313,7 @@ __STATIC_INLINE void LL_TIM_DisableIT_IDX(TIM_TypeDef *TIMx)
 
 /**
   * @brief  Indicates whether the index interrupt (IDXIE) is enabled.
-  * @note Macro @ref  IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
+  * @note Macro IS_TIM_FUNCTINONAL_ENCODER_INTERRUPT_INSTANCE(TIMx) can be used to check whether or not
   *       a timer instance provides encoder interrupt management.
   * @rmtoll DIER         IDXIE           LL_TIM_IsEnabledIT_IDX
   * @param  TIMx Timer instance
@@ -6249,7 +6328,7 @@ __STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_IDX(TIM_TypeDef *TIMx)
   * @}
   */
 
-/** @defgroup TIM_LL_EF_DMA_Management DMA-Management
+/** @defgroup TIM_LL_EF_DMA_Management DMA Management
   * @{
   */
 /**
@@ -6635,4 +6714,3 @@ ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, LL_TIM_BDTR_InitTypeDef *TIM_BDT
 #endif
 
 #endif /* __STM32G4xx_LL_TIM_H */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_ucpd.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -55,22 +54,28 @@ typedef struct
 {
   uint32_t psc_ucpdclk;         /*!< Specify the prescaler for the UCPD clock.
                                      This parameter can be a value of @ref UCPD_LL_EC_PSC.
-                                     This feature can be modified afterwards using unitary function @ref LL_UCPD_SetPSCClk().         */
+                                     This feature can be modified afterwards using function @ref LL_UCPD_SetPSCClk().
+                                */
 
-  uint32_t transwin;            /*!< Specify the number of cycles (minus 1) of the half bit clock (see HBITCLKDIV) to achieve a legal
-                                    tTransitionWindow (set according to peripheral clock to define an interval of between 12 and 20 us)
+  uint32_t transwin;            /*!< Specify the number of cycles (minus 1) of the half bit clock (see HBITCLKDIV)
+                                   to achieve a legal tTransitionWindow (set according to peripheral clock to define
+                                    an interval of between 12 and 20 us).
                                     This parameter can be a value between Min_Data=0x1 and Max_Data=0x1F
-                                    This value can be modified afterwards using unitary function @ref LL_UCPD_SetTransWin().          */
+                                    This value can be modified afterwards using function @ref LL_UCPD_SetTransWin().
+                                */
 
-  uint32_t IfrGap;              /*!< Specify the definition of the clock divider (minus 1) in order to generate tInterframeGap
-                                    from the peripheral clock.
+  uint32_t IfrGap;              /*!< Specify the definition of the clock divider (minus 1) in order to generate
+                                    tInterframeGap from the peripheral clock.
                                     This parameter can be a value between Min_Data=0x1 and Max_Data=0x1F
-                                    This feature can be modified afterwards using unitary function @ref LL_UCPD_SetIfrGap().          */
+                                    This feature can be modified afterwards using function @ref LL_UCPD_SetIfrGap().
+                                */
 
-  uint32_t HbitClockDiv;        /*!< Specify the number of cycles (minus one) at UCPD peripheral for a half bit clock e.g. program 3
-                                     for a bit clock that takes 8 cycles of the peripheral clock "UCPD1_CLK"..
+  uint32_t HbitClockDiv;        /*!< Specify the number of cycles (minus one) at UCPD peripheral for a half bit clock
+                                     e.g. program 3 for a bit clock that takes 8 cycles of the peripheral clock :
+                                     "UCPD1_CLK".
                                      This parameter can be a value between Min_Data=0x0 and Max_Data=0x3F.
-                                     This feature can be modified afterwards using unitary function @ref LL_UCPD_SetHbitClockDiv().   */
+                                     This feature can be modified using function @ref LL_UCPD_SetHbitClockDiv().
+                                */
 
 } LL_UCPD_InitTypeDef;
 
@@ -130,6 +135,7 @@ typedef struct
 #define LL_UCPD_IMR_TYPECEVT1        UCPD_IMR_TYPECEVT1IE         /*!< Enable Type C voltage level event on CC1             */
 #define LL_UCPD_IMR_TYPECEVT2        UCPD_IMR_TYPECEVT2IE         /*!< Enable Type C voltage level event on CC2             */
 #define LL_UCPD_IMR_FRSEVT           UCPD_IMR_FRSEVTIE            /*!< Enable fast Role Swap detection event                */
+
 /**
   * @}
   */
@@ -360,7 +366,7 @@ __STATIC_INLINE void LL_UCPD_Disable(UCPD_TypeDef *UCPDx)
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnabled(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnabled(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->CFG1, UCPD_CFG1_UCPDEN) == (UCPD_CFG1_UCPDEN)) ? 1UL : 0UL);
 }
@@ -669,7 +675,7 @@ __STATIC_INLINE void LL_UCPD_SetSRCRole(UCPD_TypeDef *UCPDx)
   *         @arg @ref LL_UCPD_ROLE_SNK
   *         @arg @ref LL_UCPD_ROLE_SRC
   */
-__STATIC_INLINE uint32_t LL_UCPD_GetRole(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_GetRole(UCPD_TypeDef const *const UCPDx)
 {
   return (uint32_t)(READ_BIT(UCPDx->CR, UCPD_CR_ANAMODE));
 }
@@ -1121,7 +1127,7 @@ __STATIC_INLINE void LL_UCPD_DisableIT_TxIS(UCPD_TypeDef *UCPDx)
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_FRS(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_FRS(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_FRSEVTIE) == UCPD_IMR_FRSEVTIE) ? 1UL : 0UL);
 }
@@ -1132,7 +1138,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_FRS(UCPD_TypeDef const * const UCPDx
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TypeCEventCC2(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TypeCEventCC2(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT2IE) == UCPD_IMR_TYPECEVT2IE) ? 1UL : 0UL);
 }
@@ -1143,7 +1149,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TypeCEventCC2(UCPD_TypeDef const * c
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TypeCEventCC1(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TypeCEventCC1(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TYPECEVT1IE) == UCPD_IMR_TYPECEVT1IE) ? 1UL : 0UL);
 }
@@ -1154,7 +1160,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TypeCEventCC1(UCPD_TypeDef const * c
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxMsgEnd(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxMsgEnd(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXMSGENDIE) == UCPD_IMR_RXMSGENDIE) ? 1UL : 0UL);
 }
@@ -1165,7 +1171,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxMsgEnd(UCPD_TypeDef const * const
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxOvr(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxOvr(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXOVRIE) == UCPD_IMR_RXOVRIE) ? 1UL : 0UL);
 }
@@ -1176,7 +1182,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxOvr(UCPD_TypeDef const * const UCP
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxHRST(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxHRST(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXHRSTDETIE) == UCPD_IMR_RXHRSTDETIE) ? 1UL : 0UL);
 }
@@ -1187,7 +1193,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxHRST(UCPD_TypeDef const * const UC
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxOrderSet(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxOrderSet(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXORDDETIE) == UCPD_IMR_RXORDDETIE) ? 1UL : 0UL);
 }
@@ -1198,7 +1204,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxOrderSet(UCPD_TypeDef const * cons
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxNE(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxNE(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_RXNEIE) == UCPD_IMR_RXNEIE) ? 1UL : 0UL);
 }
@@ -1209,7 +1215,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_RxNE(UCPD_TypeDef const * const UCPD
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxUND(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxUND(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXUNDIE) == UCPD_IMR_TXUNDIE) ? 1UL : 0UL);
 }
@@ -1220,7 +1226,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxUND(UCPD_TypeDef const * const UCP
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxHRSTSENT(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxHRSTSENT(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_HRSTSENTIE) == UCPD_IMR_HRSTSENTIE) ? 1UL : 0UL);
 }
@@ -1231,7 +1237,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxHRSTSENT(UCPD_TypeDef const * cons
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxHRSTDISC(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxHRSTDISC(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_HRSTDISCIE) == UCPD_IMR_HRSTDISCIE) ? 1UL : 0UL);
 }
@@ -1242,7 +1248,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxHRSTDISC(UCPD_TypeDef const * cons
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGABT(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGABT(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXMSGABTIE) == UCPD_IMR_TXMSGABTIE) ? 1UL : 0UL);
 }
@@ -1253,7 +1259,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGABT(UCPD_TypeDef const * const
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGSENT(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGSENT(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXMSGSENTIE) == UCPD_IMR_TXMSGSENTIE) ? 1UL : 0UL);
 }
@@ -1264,7 +1270,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGSENT(UCPD_TypeDef const * const
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGDISC(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGDISC(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXMSGDISCIE) == UCPD_IMR_TXMSGDISCIE) ? 1UL : 0UL);
 }
@@ -1275,7 +1281,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxMSGDISC(UCPD_TypeDef const * const
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxIS(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxIS(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->IMR, UCPD_IMR_TXISIE) == UCPD_IMR_TXISIE) ? 1UL : 0UL);
 }
@@ -1287,6 +1293,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnableIT_TxIS(UCPD_TypeDef const * const UCPD
 /** @defgroup UCPD_LL_EF_IT_Clear Interrupt Clear
   * @{
   */
+
 /**
   * @brief  Clear FRS interrupt
   * @rmtoll ICR          FRSEVTIE         LL_UCPD_ClearFlag_FRS
@@ -1444,7 +1451,7 @@ __STATIC_INLINE void LL_UCPD_ClearFlag_TxMSGDISC(UCPD_TypeDef *UCPDx)
   * @param  UCPDx UCPD Instance
   * @retval None
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_FRS(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_FRS(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_FRSEVT) == UCPD_SR_FRSEVT) ? 1UL : 0UL);
 }
@@ -1455,7 +1462,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_FRS(UCPD_TypeDef const * const UCP
   * @param  UCPDx UCPD Instance
   * @retval None
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TypeCEventCC2(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TypeCEventCC2(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_TYPECEVT2) == UCPD_SR_TYPECEVT2) ? 1UL : 0UL);
 }
@@ -1466,7 +1473,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TypeCEventCC2(UCPD_TypeDef const *
   * @param  UCPDx UCPD Instance
   * @retval None
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TypeCEventCC1(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TypeCEventCC1(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_TYPECEVT1) == UCPD_SR_TYPECEVT1) ? 1UL : 0UL);
 }
@@ -1477,7 +1484,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TypeCEventCC1(UCPD_TypeDef const *
   * @param  UCPDx UCPD Instance
   * @retval None
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxMsgEnd(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxMsgEnd(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_RXMSGEND) == UCPD_SR_RXMSGEND) ? 1UL : 0UL);
 }
@@ -1488,7 +1495,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxMsgEnd(UCPD_TypeDef const * cons
   * @param  UCPDx UCPD Instance
   * @retval None
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxOvr(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxOvr(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_RXOVR) == UCPD_SR_RXOVR) ? 1UL : 0UL);
 }
@@ -1499,7 +1506,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxOvr(UCPD_TypeDef const * const U
   * @param  UCPDx UCPD Instance
   * @retval None
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxHRST(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxHRST(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_RXHRSTDET) == UCPD_SR_RXHRSTDET) ? 1UL : 0UL);
 }
@@ -1510,7 +1517,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxHRST(UCPD_TypeDef const * const
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxOrderSet(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxOrderSet(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_RXORDDET) == UCPD_SR_RXORDDET) ? 1UL : 0UL);
 }
@@ -1521,7 +1528,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxOrderSet(UCPD_TypeDef const * co
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxNE(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxNE(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_RXNE) == UCPD_SR_RXNE) ? 1UL : 0UL);
 }
@@ -1532,7 +1539,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_RxNE(UCPD_TypeDef const * const UC
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxUND(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxUND(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_TXUND) == UCPD_SR_TXUND) ? 1UL : 0UL);
 }
@@ -1543,7 +1550,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxUND(UCPD_TypeDef const * const U
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxHRSTSENT(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxHRSTSENT(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_HRSTSENT) == UCPD_SR_HRSTSENT) ? 1UL : 0UL);
 }
@@ -1554,7 +1561,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxHRSTSENT(UCPD_TypeDef const * co
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxHRSTDISC(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxHRSTDISC(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_HRSTDISC) == UCPD_SR_HRSTDISC) ? 1UL : 0UL);
 }
@@ -1565,7 +1572,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxHRSTDISC(UCPD_TypeDef const * co
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGABT(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGABT(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_TXMSGABT) == UCPD_SR_TXMSGABT) ? 1UL : 0UL);
 }
@@ -1576,7 +1583,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGABT(UCPD_TypeDef const * cons
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGSENT(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGSENT(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_TXMSGSENT) == UCPD_SR_TXMSGSENT) ? 1UL : 0UL);
 }
@@ -1587,7 +1594,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGSENT(UCPD_TypeDef const * con
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGDISC(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGDISC(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_TXMSGDISC) == UCPD_SR_TXMSGDISC) ? 1UL : 0UL);
 }
@@ -1598,7 +1605,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxMSGDISC(UCPD_TypeDef const * con
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxIS(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxIS(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->SR, UCPD_SR_TXIS) == UCPD_SR_TXIS) ? 1UL : 0UL);
 }
@@ -1609,7 +1616,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsActiveFlag_TxIS(UCPD_TypeDef const * const UC
   * @param  UCPDx UCPD Instance
   * @retval val
   */
-__STATIC_INLINE uint32_t LL_UCPD_GetTypeCVstateCC2(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_GetTypeCVstateCC2(UCPD_TypeDef const *const UCPDx)
 {
   return UCPDx->SR & UCPD_SR_TYPEC_VSTATE_CC2;
 }
@@ -1620,7 +1627,7 @@ __STATIC_INLINE uint32_t LL_UCPD_GetTypeCVstateCC2(UCPD_TypeDef const * const UC
   * @param  UCPDx UCPD Instance
   * @retval val
   */
-__STATIC_INLINE uint32_t LL_UCPD_GetTypeCVstateCC1(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_GetTypeCVstateCC1(UCPD_TypeDef const *const UCPDx)
 {
   return UCPDx->SR & UCPD_SR_TYPEC_VSTATE_CC1;
 }
@@ -1684,7 +1691,7 @@ __STATIC_INLINE void LL_UCPD_TxDMADisable(UCPD_TypeDef *UCPDx)
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnabledTxDMA(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnabledTxDMA(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->CFG1, UCPD_CFG1_TXDMAEN) == (UCPD_CFG1_TXDMAEN)) ? 1UL : 0UL);
 }
@@ -1695,7 +1702,7 @@ __STATIC_INLINE uint32_t LL_UCPD_IsEnabledTxDMA(UCPD_TypeDef const * const UCPDx
   * @param  UCPDx UCPD Instance
   * @retval State of bit (1 or 0).
   */
-__STATIC_INLINE uint32_t LL_UCPD_IsEnabledRxDMA(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_IsEnabledRxDMA(UCPD_TypeDef const *const UCPDx)
 {
   return ((READ_BIT(UCPDx->CFG1, UCPD_CFG1_RXDMAEN) == (UCPD_CFG1_RXDMAEN)) ? 1UL : 0UL);
 }
@@ -1765,7 +1772,7 @@ __STATIC_INLINE void LL_UCPD_WriteData(UCPD_TypeDef *UCPDx, uint8_t Data)
   *         @arg @ref LL_UCPD_RXORDSET_SOPEXT1
   *         @arg @ref LL_UCPD_RXORDSET_SOPEXT2
   */
-__STATIC_INLINE uint32_t LL_UCPD_ReadRxOrderSet(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_ReadRxOrderSet(UCPD_TypeDef const *const UCPDx)
 {
   return READ_BIT(UCPDx->RX_ORDSET, UCPD_RX_ORDSET_RXORDSET);
 }
@@ -1776,7 +1783,7 @@ __STATIC_INLINE uint32_t LL_UCPD_ReadRxOrderSet(UCPD_TypeDef const * const UCPDx
   * @param  UCPDx UCPD Instance
   * @retval RXPaysize.
   */
-__STATIC_INLINE uint32_t LL_UCPD_ReadRxPaySize(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_ReadRxPaySize(UCPD_TypeDef const *const UCPDx)
 {
   return READ_BIT(UCPDx->TX_PAYSZ, UCPD_RX_PAYSZ_RXPAYSZ);
 }
@@ -1787,7 +1794,7 @@ __STATIC_INLINE uint32_t LL_UCPD_ReadRxPaySize(UCPD_TypeDef const * const UCPDx)
   * @param  UCPDx UCPD Instance
   * @retval RxData Value between Min_Data=0x00 and Max_Data=0xFF
   */
-__STATIC_INLINE uint32_t LL_UCPD_ReadData(UCPD_TypeDef const * const UCPDx)
+__STATIC_INLINE uint32_t LL_UCPD_ReadData(UCPD_TypeDef const *const UCPDx)
 {
   return READ_REG(UCPDx->RXDR);
 }
@@ -1854,4 +1861,3 @@ void        LL_UCPD_StructInit(LL_UCPD_InitTypeDef *UCPD_InitStruct);
 
 #endif /* STM32G4xx_LL_UCPD_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_usart.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -712,7 +711,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledFIFO(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_SetTXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold)
 {
-  MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos);
+  ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos);
 }
 
 /**
@@ -751,7 +750,7 @@ __STATIC_INLINE uint32_t LL_USART_GetTXFIFOThreshold(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_SetRXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold)
 {
-  MODIFY_REG(USARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos);
+  ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos);
 }
 
 /**
@@ -798,8 +797,8 @@ __STATIC_INLINE uint32_t LL_USART_GetRXFIFOThreshold(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_ConfigFIFOsThreshold(USART_TypeDef *USARTx, uint32_t TXThreshold, uint32_t RXThreshold)
 {
-  MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) |
-             (RXThreshold << USART_CR3_RXFTCFG_Pos));
+  ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) |
+                    (RXThreshold << USART_CR3_RXFTCFG_Pos));
 }
 
 /**
@@ -814,7 +813,7 @@ __STATIC_INLINE void LL_USART_ConfigFIFOsThreshold(USART_TypeDef *USARTx, uint32
   */
 __STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_UESM);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_UESM);
 }
 
 /**
@@ -828,7 +827,7 @@ __STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableInStopMode(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_UESM);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_UESM);
 }
 
 /**
@@ -852,7 +851,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledInStopMode(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_RE);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RE);
 }
 
 /**
@@ -863,7 +862,7 @@ __STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_RE);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RE);
 }
 
 /**
@@ -874,7 +873,7 @@ __STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_TE);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TE);
 }
 
 /**
@@ -885,7 +884,7 @@ __STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_TE);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TE);
 }
 
 /**
@@ -903,7 +902,7 @@ __STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection)
 {
-  MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection);
+  ATOMIC_MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection);
 }
 
 /**
@@ -1022,7 +1021,7 @@ __STATIC_INLINE uint32_t LL_USART_GetDataWidth(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_MME);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_MME);
 }
 
 /**
@@ -1033,7 +1032,7 @@ __STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableMuteMode(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_MME);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_MME);
 }
 
 /**
@@ -2094,7 +2093,7 @@ __STATIC_INLINE uint32_t LL_USART_GetIrdaPowerMode(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_SetIrdaPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue)
 {
-  MODIFY_REG(USARTx->GTPR, (uint16_t)USART_GTPR_PSC, (uint16_t)PrescalerValue);
+  MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue);
 }
 
 /**
@@ -2241,7 +2240,7 @@ __STATIC_INLINE uint32_t LL_USART_GetSmartcardAutoRetryCount(USART_TypeDef *USAR
   */
 __STATIC_INLINE void LL_USART_SetSmartcardPrescaler(USART_TypeDef *USARTx, uint32_t PrescalerValue)
 {
-  MODIFY_REG(USARTx->GTPR, (uint16_t)USART_GTPR_PSC, (uint16_t)PrescalerValue);
+  MODIFY_REG(USARTx->GTPR, USART_GTPR_PSC, (uint16_t)PrescalerValue);
 }
 
 /**
@@ -2270,7 +2269,7 @@ __STATIC_INLINE uint32_t LL_USART_GetSmartcardPrescaler(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_SetSmartcardGuardTime(USART_TypeDef *USARTx, uint32_t GuardTime)
 {
-  MODIFY_REG(USARTx->GTPR, (uint16_t)USART_GTPR_GT, (uint16_t)(GuardTime << USART_GTPR_GT_Pos));
+  MODIFY_REG(USARTx->GTPR, USART_GTPR_GT, (uint16_t)(GuardTime << USART_GTPR_GT_Pos));
 }
 
 /**
@@ -3459,7 +3458,7 @@ __STATIC_INLINE void LL_USART_ClearFlag_WKUP(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_IDLEIE);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_IDLEIE);
 }
 
 /* Legacy define */
@@ -3475,7 +3474,7 @@ __STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_RXNE_RXFNE(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
 }
 
 /**
@@ -3486,7 +3485,7 @@ __STATIC_INLINE void LL_USART_EnableIT_RXNE_RXFNE(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_TCIE);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TCIE);
 }
 
 /* Legacy define */
@@ -3502,7 +3501,7 @@ __STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_TXE_TXFNF(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
 }
 
 /**
@@ -3513,7 +3512,7 @@ __STATIC_INLINE void LL_USART_EnableIT_TXE_TXFNF(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_PEIE);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_PEIE);
 }
 
 /**
@@ -3524,7 +3523,7 @@ __STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_CMIE);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_CMIE);
 }
 
 /**
@@ -3535,7 +3534,7 @@ __STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_RTOIE);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RTOIE);
 }
 
 /**
@@ -3548,7 +3547,7 @@ __STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_EOBIE);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_EOBIE);
 }
 
 /**
@@ -3561,7 +3560,7 @@ __STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_TXFE(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_TXFEIE);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXFEIE);
 }
 
 /**
@@ -3572,7 +3571,7 @@ __STATIC_INLINE void LL_USART_EnableIT_TXFE(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_RXFF(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR1, USART_CR1_RXFFIE);
+  ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXFFIE);
 }
 
 /**
@@ -3600,7 +3599,7 @@ __STATIC_INLINE void LL_USART_EnableIT_LBD(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR3, USART_CR3_EIE);
+  ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_EIE);
 }
 
 /**
@@ -3613,7 +3612,7 @@ __STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR3, USART_CR3_CTSIE);
+  ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_CTSIE);
 }
 
 /**
@@ -3626,7 +3625,7 @@ __STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR3, USART_CR3_WUFIE);
+  ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_WUFIE);
 }
 
 /**
@@ -3639,7 +3638,7 @@ __STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_TXFT(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR3, USART_CR3_TXFTIE);
+  ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TXFTIE);
 }
 
 /**
@@ -3652,7 +3651,7 @@ __STATIC_INLINE void LL_USART_EnableIT_TXFT(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_TCBGT(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR3, USART_CR3_TCBGTIE);
+  ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TCBGTIE);
 }
 
 /**
@@ -3665,7 +3664,7 @@ __STATIC_INLINE void LL_USART_EnableIT_TCBGT(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableIT_RXFT(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR3, USART_CR3_RXFTIE);
+  ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_RXFTIE);
 }
 
 /**
@@ -3676,7 +3675,7 @@ __STATIC_INLINE void LL_USART_EnableIT_RXFT(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE);
 }
 
 /* Legacy define */
@@ -3692,7 +3691,7 @@ __STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_RXNE_RXFNE(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
 }
 
 /**
@@ -3703,7 +3702,7 @@ __STATIC_INLINE void LL_USART_DisableIT_RXNE_RXFNE(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE);
 }
 
 /* Legacy define */
@@ -3719,7 +3718,7 @@ __STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_TXE_TXFNF(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
 }
 
 /**
@@ -3730,7 +3729,7 @@ __STATIC_INLINE void LL_USART_DisableIT_TXE_TXFNF(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE);
 }
 
 /**
@@ -3741,7 +3740,7 @@ __STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE);
 }
 
 /**
@@ -3752,7 +3751,7 @@ __STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE);
 }
 
 /**
@@ -3765,7 +3764,7 @@ __STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE);
 }
 
 /**
@@ -3778,7 +3777,7 @@ __STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_TXFE(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_TXFEIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXFEIE);
 }
 
 /**
@@ -3791,7 +3790,7 @@ __STATIC_INLINE void LL_USART_DisableIT_TXFE(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_RXFF(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR1, USART_CR1_RXFFIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXFFIE);
 }
 
 /**
@@ -3819,7 +3818,7 @@ __STATIC_INLINE void LL_USART_DisableIT_LBD(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR3, USART_CR3_EIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_EIE);
 }
 
 /**
@@ -3832,7 +3831,7 @@ __STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE);
 }
 
 /**
@@ -3845,7 +3844,7 @@ __STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE);
 }
 
 /**
@@ -3858,7 +3857,7 @@ __STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_TXFT(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR3, USART_CR3_TXFTIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TXFTIE);
 }
 
 /**
@@ -3871,7 +3870,7 @@ __STATIC_INLINE void LL_USART_DisableIT_TXFT(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_TCBGT(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR3, USART_CR3_TCBGTIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TCBGTIE);
 }
 
 /**
@@ -3884,7 +3883,7 @@ __STATIC_INLINE void LL_USART_DisableIT_TCBGT(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableIT_RXFT(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR3, USART_CR3_RXFTIE);
+  ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_RXFTIE);
 }
 
 /**
@@ -4118,7 +4117,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledIT_RXFT(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR3, USART_CR3_DMAR);
+  ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAR);
 }
 
 /**
@@ -4129,7 +4128,7 @@ __STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR);
+  ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR);
 }
 
 /**
@@ -4151,7 +4150,7 @@ __STATIC_INLINE uint32_t LL_USART_IsEnabledDMAReq_RX(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx)
 {
-  SET_BIT(USARTx->CR3, USART_CR3_DMAT);
+  ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAT);
 }
 
 /**
@@ -4162,7 +4161,7 @@ __STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx)
   */
 __STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx)
 {
-  CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT);
+  ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT);
 }
 
 /**
@@ -4400,4 +4399,3 @@ void        LL_USART_ClockStructInit(LL_USART_ClockInitTypeDef *USART_ClockInitS
 
 #endif /* STM32G4xx_LL_USART_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_usb.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -23,7 +22,7 @@
 
 #ifdef __cplusplus
 extern "C" {
-#endif
+#endif /* __cplusplus */
 
 /* Includes ------------------------------------------------------------------*/
 #include "stm32g4xx_hal_def.h"
@@ -60,12 +59,13 @@ typedef struct
                                          This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
 
   uint32_t speed;                   /*!< USB Core speed.
-                                         This parameter can be any value of @ref USB_Core_Speed                 */
+                                         This parameter can be any value of @ref PCD_Speed/HCD_Speed
+                                                                                 (HCD_SPEED_xxx, HCD_SPEED_xxx) */
 
   uint32_t ep0_mps;                 /*!< Set the Endpoint 0 Max Packet size.                                    */
 
   uint32_t phy_itface;              /*!< Select the used PHY interface.
-                                         This parameter can be any value of @ref USB_Core_PHY                   */
+                                         This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module  */
 
   uint32_t Sof_enable;              /*!< Enable or disable the output of the SOF signal.                        */
 
@@ -167,6 +167,10 @@ typedef struct
 #define PMA_ACCESS                             1U
 
 #define EP_ADDR_MSK                            0x7U
+
+#ifndef USE_USB_DOUBLE_BUFFER
+#define USE_USB_DOUBLE_BUFFER                  1U
+#endif /* USE_USB_DOUBLE_BUFFER */
 /**
   * @}
   */
@@ -194,7 +198,7 @@ HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);
 HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx, USB_EPTypeDef *ep);
 HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx, USB_EPTypeDef *ep);
 HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep);
-#endif
+#endif /* defined (HAL_PCD_MODULE_ENABLED) */
 
 HAL_StatusTypeDef USB_SetDevAddress(USB_TypeDef *USBx, uint8_t address);
 HAL_StatusTypeDef USB_DevConnect(USB_TypeDef *USBx);
@@ -229,9 +233,7 @@ void              USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf,
 
 #ifdef __cplusplus
 }
-#endif
+#endif /* __cplusplus */
 
 
 #endif /* STM32G4xx_LL_USB_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_utils.h

@@ -3,6 +3,17 @@
   * @file    stm32g4xx_ll_utils.h
   * @author  MCD Application Team
   * @brief   Header file of UTILS LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
   @verbatim
   ==============================================================================
                      ##### How to use this driver #####
@@ -15,18 +26,6 @@
       (+) PLL configuration functions
 
   @endverbatim
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
   */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
@@ -316,4 +315,3 @@ ErrorStatus LL_PLL_ConfigSystemClock_HSE(uint32_t HSEFrequency, uint32_t HSEBypa
 
 #endif /* STM32G4xx_LL_UTILS_H */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

Inc/stm32g4xx_ll_wwdg.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -327,5 +326,3 @@ __STATIC_INLINE uint32_t LL_WWDG_IsEnabledIT_EWKUP(WWDG_TypeDef *WWDGx)
 #endif
 
 #endif /* STM32G4xx_LL_WWDG_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

README.md

@@ -1,34 +1,29 @@
 # STM32CubeG4 HAL Driver MCU Component
 
+![latest tag](https://img.shields.io/github/v/tag/STMicroelectronics/stm32g4xx_hal_driver.svg?color=brightgreen)
+
 ## Overview
 
-**STM32Cube** is an STMicroelectronics original initiative to ease the developers life by reducing efforts, time and cost.
+**STM32Cube** is an STMicroelectronics original initiative to ease developers' life by reducing efforts, time and cost.
 
-**STM32Cube** covers the overall STM32 products portfolio. It includes a comprehensive embedded software platform, delivered for each STM32 series.
-   * The CMSIS modules (core and device) corresponding to the ARM(tm) core implemented in this STM32 product
-   * The STM32 HAL-LL drivers : an abstraction drivers layer, the API ensuring maximized portability across the STM32 portfolio
-   * The BSP Drivers of each evaluation or demonstration board provided by this STM32 series
-   * A consistent set of middlewares components such as RTOS, USB, FatFS, Graphics, STM32_TouchSensing_Library ...
-   * A full set of software projects (basic examples, applications or demonstrations) for each board provided by this STM32 series
+**STM32Cube** covers the overall STM32 products portfolio. It includes a comprehensive embedded software platform delivered for each STM32 series.
+   * The CMSIS modules (core and device) corresponding to the ARM(tm) core implemented in this STM32 product.
+   * The STM32 HAL-LL drivers, an abstraction layer offering a set of APIs ensuring maximized portability across the STM32 portfolio.
+   * The BSP drivers of each evaluation, demonstration or nucleo board provided for this STM32 series.
+   * A consistent set of middleware libraries such as RTOS, USB, FatFS, graphics, touch sensing library...
+   * A full set of software projects (basic examples, applications, and demonstrations) for each board provided for this STM32 series.
 
 Two models of publication are proposed for the STM32Cube embedded software:
-   * The monolithic **MCU Package** : all STM32Cube software modules of one STM32 series are present (Drivers, Middlewares, Projects, Utilities) in the repo (usual name **STM32Cubexx**, xx corresponding to the STM32 series)
-   * The **MCU component** : progressively from November 2019, each STM32Cube software module being part of the STM32Cube MCU Package, will be delivered as an individual repo, allowing the user to select and get only the required software functions.
+   * The monolithic **MCU Package**: all STM32Cube software modules of one STM32 series are present (Drivers, Middleware, Projects, Utilities) in the repository (usual name **STM32Cubexx**, xx corresponding to the STM32 series).
+   * The **MCU component**: each STM32Cube software module being part of the STM32Cube MCU Package, is delivered as an individual repository, allowing the user to select and get only the required software functions.
 
 ## Description
 
 This **stm32g4xx_hal_driver** MCU component repo is one element of the STM32CubeG4 MCU embedded software package, providing the **HAL-LL Drivers** part.
 
-## License
-
-Copyright (c) 2017 STMicroelectronics.
-
-This software component is licensed by STMicroelectronics under BSD 3-Clause license. You may not use this file except in compliance with the License. 
-You may obtain a copy of the License [here](https://opensource.org/licenses/BSD-3-Clause).
-
 ## Release note
 
-Details about the content of this release are available in the release note [here](https://htmlpreview.github.io/?https://github.com/STMicroelectronics/stm32g4xx_hal_driver/blob/master/Release_Notes.html).
+Details about the content of this release are available in the release note [here](https://htmlpreview.github.io/?https://github.com/STMicroelectronics/stm32f7xx_hal_driver/blob/master/Release_Notes.html).
 
 ## Compatibility information
 
@@ -43,6 +38,7 @@ Tag v1.1.0 | Tag v1.1.0 | Tag v5.4.0_cm4 | Tag v1.1.0 (and following, if any, ti
 Tag v1.1.1 | Tag v1.1.1 | Tag v5.4.0_cm4 | Tag v1.2.0 (and following, if any, till next new tag)
 Tag v1.2.0 | Tag v1.2.0 | Tag v5.6.0_cm4 | Tag v1.3.0 (and following, if any, till next new tag)
 Tag v1.2.1 | Tag v1.2.1 | Tag v5.6.0_cm4 | Tag v1.4.0 (and following, if any, till next new tag)
+Tag v1.2.2 | Tag v1.2.2 | Tag v5.6.0_cm4 | Tag v1.5.0 (and following, if any, till next new tag)
 
 Details about the content of this release are available in the release note [here](https://htmlpreview.github.io/?https://github.com/STMicroelectronics/stm32g4xx_hal_driver/blob/master/Release_Notes.html). 
 
@@ -50,6 +46,4 @@ The full **STM32CubeG4** MCU package is available [here](https://github.com/STMi
 
 ## Troubleshooting
 
-If you have any issue with the **Software content** of this repo, you can [file an issue on Github](https://github.com/STMicroelectronics/stm32g4xx_hal_driver/issues/new).
-
-For any other question related to the product, the tools, the environment, you can submit a topic on the [ST Community/STM32 MCUs forum](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus).
+Please refer to the [CONTRIBUTING.md](CONTRIBUTING.md) guide.

Release_Notes.html

@@ -29,9 +29,6 @@
 </center>
 </div>
 </div>
-<h1 id="license">License</h1>
-<p>This software component is licensed by ST under BSD 3-Clause license, the “License”; You may not use this component except in compliance with the License. You may obtain a copy of the License at:</p>
-<p><a href="https://opensource.org/licenses/BSD-3-Clause">https://opensource.org/licenses/BSD-3-Clause</a></p>
 <h1 id="purpose">Purpose</h1>
 <p>The STM32Cube HAL and LL, an STM32 abstraction layer embedded software, ensure maximized portability across STM32 portfolio.</p>
 <p>The Portable APIs layer provides a generic, multi instanced and simple set of APIs to interact with the upper layer (application, libraries and stacks). It is composed of native and extended APIs set. It is directly built around a generic architecture and allows the build-upon layers, like the middleware layer, to implement its functions without knowing in-depth the used STM32 device. This improves the library code reusability and guarantees an easy portability on other devices and STM32 families.</p>
@@ -46,7 +43,7 @@
 <div class="col-sm-12 col-lg-8">
 <h1 id="update-history">Update History</h1>
 <div class="collapse">
-<input type="checkbox" id="collapse-section5" aria-hidden="true"> <label for="collapse-section5" aria-hidden="true">V1.2.1 / 27-January-2021</label>
+<input type="checkbox" id="collapse-section6" checked aria-hidden="true"> <label for="collapse-section6" aria-hidden="true">V1.2.2 / 10-November-2021</label>
 <div>
 <h2 id="main-changes">Main Changes</h2>
 <h3 id="maintenance-release">Maintenance Release</h3>
@@ -54,6 +51,169 @@
 <li><p>General updates to fix known defects and enhancements implementation</p></li>
 <li><strong>HAL</strong></li>
 <li>General updates to fix known defects and enhancements implementation.</li>
+<li><strong>HAL/LL ADC</strong> update
+<ul>
+<li>Update HAL_ADC_Start_DMA() API to avoid return error when using Independent instance with multimode activated.</li>
+<li>Update of the TEMPSENSOR_CAL2_TEMP value in the ll_adc.h file.</li>
+<li>Update LL_ADC_SetChannelSingleDiff() API to be compliant with ARM CLang compiler v6.16.</li>
+</ul></li>
+<li><strong>HAL/LL RCC</strong> update
+<ul>
+<li>Add missing API IsEnabled for PLL "domain" output.</li>
+<li>Enhance RCC_MCOx in order to support both MCO number (PA8 and PG10) and AF mapping.</li>
+</ul></li>
+<li><strong>HAL/LL USART</strong> update
+<ul>
+<li>Handling of UART concurrent register access in case of race condition between Tx and Rx transfers (HAL UART and LL LPUART)</li>
+<li>Add const qualifier for read only pointers.</li>
+<li>Improve header description of USART_WaitOnFlagUntilTimeout() function</li>
+<li>Add a check on the USART parity before enabling the parity error interrupt.</li>
+</ul></li>
+<li><strong>HAL/LL UART</strong> update
+<ul>
+<li>Fix erroneous UART’s handle state in case of error returned after DMA reception start within UART_Start_Receive_DMA().</li>
+<li>Correction on UART ReceptionType management in case of ReceptionToIdle API are called from RxEvent callback</li>
+<li>Handling of UART concurrent register access in case of race condition between Tx and Rx transfers (HAL UART and LL LPUART)</li>
+<li>Improve header description of UART_WaitOnFlagUntilTimeout() function</li>
+<li>Add a check on the UART parity before enabling the parity error interruption.</li>
+<li>Add const qualifier for read only pointers.</li>
+<li>Fix wrong cast when computing the USARTDIV value in UART_SetConfig().</li>
+</ul></li>
+<li><strong>LL LPTIM</strong> update
+<ul>
+<li>Add check on PRIMASK register to prevent from enabling unwanted global interrupts within LPTIM_Disable() and LL_LPTIM_Disable().</li>
+</ul></li>
+<li><strong>LL TIM</strong> update
+<ul>
+<li>Update LL_TIM_OC_SetPulseWidth implementation to properly align the PulseWidth input value with the TIM_ECR register.</li>
+<li>Fix wrong compile switch used in TIM_LL_EC_DMABURST_BASEADDR constant definitions.</li>
+</ul></li>
+<li><strong>LL LPUART</strong> update
+<ul>
+<li>Remove useless TXFECF reference from LL LPUART driver.</li>
+</ul></li>
+<li><strong>HAL IRDA</strong> update
+<ul>
+<li>Improve header description of IRDA_WaitOnFlagUntilTimeout() function</li>
+<li>Add a check on the IRDA parity before enabling the parity error interrupt.</li>
+<li>Add const qualifier for read only pointers.</li>
+<li>Fix wrong cast when computing the USARTDIV value in IRDA_SetConfig().</li>
+</ul></li>
+<li><strong>HAL SMARTCARD</strong> update
+<ul>
+<li>Improve header description of SMARTCARD_WaitOnFlagUntilTimeout() function.</li>
+<li>Add const qualifier for read only pointers.</li>
+<li>Fix wrong cast when computing the USARTDIV value in SMARTCARD_SetConfig().</li>
+</ul></li>
+<li><strong>HAL/LL SPI</strong> update
+<ul>
+<li>Updated to fix MISRA-C 2012 Rule-13.2.</li>
+<li>Update LL_SPI_TransmitData8() API to avoid casting the result to 8 bits.</li>
+</ul></li>
+<li><strong>HAL RTC</strong> update
+<ul>
+<li>Update __HAL_RTC_…(<strong>HANDLE</strong>, …) macros to access registers through (<strong>HANDLE</strong>)-&gt;Instance pointer and avoid “unused variable” warnings.</li>
+</ul></li>
+<li><strong>HAL CRYP</strong> update
+<ul>
+<li>CRYP_AESCCM_Process_IT() update to manage header lengths in bytes or words when header length is less than 16 bytes.</li>
+</ul></li>
+<li><strong>HAL HRTIM</strong> update
+<ul>
+<li>Fix compilation ARMCLANG -Wparenteses-equality warnings.</li>
+<li>Fix missing initial update when Resynchronized update is used.</li>
+</ul></li>
+<li><strong>HAL FLASH</strong> update
+<ul>
+<li>Update to support STM32G4 part numbers with 256K flash</li>
+<li>Disable ICache while Flash programming.
+<ul>
+<li>Update HAL_FLASHEx_Erase() to remove __HAL_FLASH_INSTRUCTION_CACHE_DISABLE().</li>
+</ul></li>
+</ul></li>
+<li><strong>HAL USB</strong> update
+<ul>
+<li>HAL PCD: add fix transfer complete for IN Interrupt transaction in single buffer mode</li>
+</ul></li>
+<li><strong>HAL GPIO</strong> update
+<ul>
+<li>Reorder EXTI configuration sequence in order to avoid unexpected level detection.</li>
+<li>Optimize assertion control for GPIO Pull mode in HAL_GPIO_Init() API.</li>
+<li>Update HAL_GPIO_Init() API to avoid the configuration of PUPDR register when Analog mode is selected.</li>
+</ul></li>
+<li><strong>HAL EXTI</strong> update
+<ul>
+<li>Update HAL_EXTI_GetConfigLine() API to set default configuration value of Trigger and GPIOSel before checking each corresponding registers.</li>
+</ul></li>
+<li><strong>HAL USART</strong> update
+<ul>
+<li>Improve header description of USART_WaitOnFlagUntilTimeout() function</li>
+<li>Add a check on the USART parity before enabling the parity error interrupt.</li>
+<li>Fix compilation warnings generated with ARMV6 compiler.</li>
+</ul></li>
+<li><strong>HAL I2C</strong> update
+<ul>
+<li>Update I2C_IsAcknowledgeFailed() API to avoid I2C in busy state if NACK received after transmitting register address.</li>
+<li>Update to handle errors in polling mode.
+<ul>
+<li>Rename I2C_IsAcknowledgeFailed() to I2C_IsErrorOccurred() and correctly manage when error occurs.</li>
+</ul></li>
+<li>Update to fix issue detected due to low system frequency execution (HSI).</li>
+<li>Declare an internal macro link to DMA macro to check remaining data: I2C_GET_DMA_REMAIN_DATA.</li>
+</ul></li>
+<li><strong>HAL SMBUS</strong> update
+<ul>
+<li>Add the support of wake up capability.
+<ul>
+<li>Add new APIs:
+<ul>
+<li>HAL_SMBUSEx_EnableWakeUp()</li>
+<li>HAL_SMBUSEx_DisableWakeUp()</li>
+</ul></li>
+</ul></li>
+<li>Update to fix issue of mismatched data received by master in case of data size to be transmitted by the slave is greater than the data size to be received by the master.
+<ul>
+<li>Add flush on TX register.</li>
+</ul></li>
+</ul></li>
+<li><strong>HAL IWDG</strong> update
+<ul>
+<li>Add LSI startup time in default IWDG timeout calculation (HAL_IWDG_DEFAULT_TIMEOUT).</li>
+</ul></li>
+<li><strong>HAL RNG</strong> update
+<ul>
+<li>Update timeout mechanism to avoid false timeout detection in case of preemption.</li>
+</ul></li>
+<li><strong>HAL NAND</strong> update
+<ul>
+<li>Update implementation of “HAL_NAND_Write_Page_16b” and “HAL_NAND_Read_Page_16b” APIs implementation to fix an issue with the page calculation of 8 bits memories.</li>
+</ul></li>
+</ul>
+<h2 id="development-toolchains-and-compilers">Development Toolchains and Compilers</h2>
+<ul>
+<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.50.4 + ST-LINKV2</li>
+<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.31 + ST-LINKV2</li>
+<li>STM32CubeIDE toolchain (gcc9_2020_q2_update) <strong>V1.7.0</strong></li>
+</ul>
+<h2 id="supported-devices">Supported Devices</h2>
+<ul>
+<li>STM32G431/41xx</li>
+<li>STM32G471xx</li>
+<li>STM32G473/83xx</li>
+<li>STM32G474/84xx</li>
+<li>STM32G491/A1xx</li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section5" aria-hidden="true"> <label for="collapse-section5" aria-hidden="true">V1.2.1 / 27-January-2021</label>
+<div>
+<h2 id="main-changes-1">Main Changes</h2>
+<h3 id="maintenance-release-1">Maintenance Release</h3>
+<ul>
+<li><p>General updates to fix known defects and enhancements implementation</p></li>
+<li><strong>HAL</strong></li>
+<li>General updates to fix known defects and enhancements implementation.</li>
 <li>Support for new ARM compiler Keil V6.</li>
 <li>Added new defines for ARM compiler V6:
 <ul>
@@ -223,13 +383,13 @@
 </ul></li>
 <li><p>Added few instructions before reading the RX count register.</p></li>
 </ul>
-<h2 id="development-toolchains-and-compilers">Development Toolchains and Compilers</h2>
+<h2 id="development-toolchains-and-compilers-1">Development Toolchains and Compilers</h2>
 <ul>
 <li>IAR Embedded Workbench for ARM (EWARM) toolchain <strong>V8.50.4</strong> + ST-LINKV2</li>
 <li>RealView Microcontroller Development Kit (MDK-ARM) toolchain <strong>V5.31</strong> + ST-LINKV2</li>
 <li>STM32CubeIDE toolchain <strong>V1.6.0</strong></li>
 </ul>
-<h2 id="supported-devices">Supported Devices</h2>
+<h2 id="supported-devices-1">Supported Devices</h2>
 <ul>
 <li>STM32G431/41xx</li>
 <li>STM32G471xx</li>
@@ -242,8 +402,8 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section4" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true">V1.2.0 / 26-June-2020</label>
 <div>
-<h2 id="main-changes-1">Main Changes</h2>
-<h3 id="maintenance-release-1">Maintenance Release</h3>
+<h2 id="main-changes-2">Main Changes</h2>
+<h3 id="maintenance-release-2">Maintenance Release</h3>
 <ul>
 <li>Add support for STM32G491xx and STM32G4A1 part numbers</li>
 <li><p>General updates to fix known defects and enhancements implementation</p></li>
@@ -373,13 +533,13 @@
 <li>Correct some word spelling issues</li>
 </ul></li>
 </ul>
-<h2 id="development-toolchains-and-compilers-1">Development Toolchains and Compilers</h2>
+<h2 id="development-toolchains-and-compilers-2">Development Toolchains and Compilers</h2>
 <ul>
 <li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.40.1</li>
 <li>RealView Microcontroller Development Kit (MDK-ARM) toolchain <strong>V5.29</strong></li>
 <li>STM32CubeIDE toolchain <strong>V1.4.0</strong></li>
 </ul>
-<h2 id="supported-devices-1">Supported Devices</h2>
+<h2 id="supported-devices-2">Supported Devices</h2>
 <ul>
 <li>STM32G431/41xx</li>
 <li>STM32G471xx</li>
@@ -392,8 +552,8 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section3" aria-hidden="true"> <label for="collapse-section3" aria-hidden="true">V1.1.1 / 14-February-2020</label>
 <div>
-<h2 id="main-changes-2">Main Changes</h2>
-<h3 id="maintenance-release-2">Maintenance Release</h3>
+<h2 id="main-changes-3">Main Changes</h2>
+<h3 id="maintenance-release-3">Maintenance Release</h3>
 <ul>
 <li><p>General updates to fix known defects and enhancements implementation</p></li>
 <li><strong>HAL/LL CRYP</strong> update
@@ -576,13 +736,13 @@
 <li>API LL_PLL_ConfigSystemClock_HSI() and API LL_PLL_ConfigSystemClock_HSE() updated to set back the AHB prescaler to 1 after it has been temporarily set to 2 to avoid undershoot when configuring PLL at high frequencies.</li>
 </ul></li>
 </ul>
-<h2 id="development-toolchains-and-compilers-2">Development Toolchains and Compilers</h2>
+<h2 id="development-toolchains-and-compilers-3">Development Toolchains and Compilers</h2>
 <ul>
 <li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3</li>
 <li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1</li>
 <li>STM32CubeIDE toolchain v1.3.0</li>
 </ul>
-<h2 id="supported-devices-2">Supported Devices</h2>
+<h2 id="supported-devices-3">Supported Devices</h2>
 <ul>
 <li>STM32G431/41xx</li>
 <li>STM32G471xx</li>
@@ -594,8 +754,8 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section2" aria-hidden="true"> <label for="collapse-section2" aria-hidden="true">V1.1.0 / 28-June-2019</label>
 <div>
-<h2 id="main-changes-3">Main Changes</h2>
-<h3 id="maintenance-release-3">Maintenance Release</h3>
+<h2 id="main-changes-4">Main Changes</h2>
+<h3 id="maintenance-release-4">Maintenance Release</h3>
 <p>Maintenance release of HAL (Hardware Abstraction Layer) and LL (Low layers) drivers to support STM32G431/41xx, STM32G471xx, STM32G473/83xx and STM32G474/84xx.</p>
 <h2 id="contents">Contents</h2>
 <table>
@@ -678,13 +838,13 @@
 </tr>
 </tbody>
 </table>
-<h2 id="development-toolchains-and-compilers-3">Development Toolchains and Compilers</h2>
+<h2 id="development-toolchains-and-compilers-4">Development Toolchains and Compilers</h2>
 <ul>
 <li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2</li>
 <li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25</li>
 <li>System Workbench STM32 (SW4STM32) toolchain V2.7.2</li>
 </ul>
-<h2 id="supported-devices-3">Supported Devices</h2>
+<h2 id="supported-devices-4">Supported Devices</h2>
 <ul>
 <li>STM32G431/41xx</li>
 <li>STM32G471xx</li>
@@ -696,16 +856,16 @@
 <div class="collapse">
 <input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true">V1.0.0 / 12-April-2019</label>
 <div>
-<h2 id="main-changes-4">Main Changes</h2>
+<h2 id="main-changes-5">Main Changes</h2>
 <h3 id="first-release">First release</h3>
 <p>First official release of HAL (Hardware Abstraction Layer) and LL (Low layers) drivers to support STM32G431/41xx, STM32G471xx, STM32G473/83xx and STM32G474/84xx.</p>
-<h2 id="development-toolchains-and-compilers-4">Development Toolchains and Compilers</h2>
+<h2 id="development-toolchains-and-compilers-5">Development Toolchains and Compilers</h2>
 <ul>
 <li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2</li>
 <li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25</li>
 <li>System Workbench STM32 (SW4STM32) toolchain V2.7.2</li>
 </ul>
-<h2 id="supported-devices-4">Supported Devices</h2>
+<h2 id="supported-devices-5">Supported Devices</h2>
 <ul>
 <li>STM32G431/41xx</li>
 <li>STM32G471xx</li>

Src/stm32g4xx_hal.c

@@ -4,7 +4,17 @@
   * @author  MCD Application Team
   * @brief   HAL module driver.
   *          This is the common part of the HAL initialization
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.
   *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
   @verbatim
   ==============================================================================
                      ##### How to use this driver #####
@@ -19,17 +29,6 @@
 
   @endverbatim
   ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
   */
 
 /* Includes ------------------------------------------------------------------*/
@@ -49,11 +48,11 @@
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
 /**
-  * @brief STM32G4xx HAL Driver version number V1.2.1
+  * @brief STM32G4xx HAL Driver version number V1.2.2
   */
 #define __STM32G4xx_HAL_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
 #define __STM32G4xx_HAL_VERSION_SUB1   (0x02U) /*!< [23:16] sub1 version */
-#define __STM32G4xx_HAL_VERSION_SUB2   (0x01U) /*!< [15:8]  sub2 version */
+#define __STM32G4xx_HAL_VERSION_SUB2   (0x02U) /*!< [15:8]  sub2 version */
 #define __STM32G4xx_HAL_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
 #define __STM32G4xx_HAL_VERSION         ((__STM32G4xx_HAL_VERSION_MAIN << 24U)\
                                          |(__STM32G4xx_HAL_VERSION_SUB1 << 16U)\
@@ -771,4 +770,3 @@ void HAL_SYSCFG_CCMSRAM_WriteProtectionEnable(uint32_t Page)
   * @}
   */
 
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/