clean up bsp, adde board_millis()

examples/device/cdc_msc_hid/src/main.c

@@ -124,7 +124,7 @@ void usb_hid_task(void)
   const uint32_t interval_ms = 10;
   static uint32_t start_ms = 0;
 
-  if ( board_noos_millis() < start_ms + interval_ms) return; // not enough time
+  if ( board_millis() < start_ms + interval_ms) return; // not enough time
   start_ms += interval_ms;
 
   uint32_t const btn = board_buttons();
@@ -200,7 +200,7 @@ void led_blinking_task(void)
   static bool led_state = false;
 
   // Blink every 1000 ms
-  if ( board_noos_millis() < start_ms + interval_ms) return; // not enough time
+  if ( board_millis() < start_ms + interval_ms) return; // not enough time
   start_ms += interval_ms;
 
   board_led_control(led_state);

examples/device/cdc_msc_hid_freertos/src/main.c

@@ -150,10 +150,11 @@ void usb_hid_task(void* params)
   (void) params;
 
   // Poll every 10ms
-  static tu_timeout_t tm = { .start = 0, .interval = 10 };
+  const uint32_t interval_ms = 10;
+  static uint32_t start_ms = 0;
 
-  if ( !tu_timeout_expired(&tm) ) return; // not enough time
-  tu_timeout_reset(&tm);
+  if ( board_millis() < start_ms + interval_ms) return; // not enough time
+  start_ms += interval_ms;
 
   uint32_t const btn = board_buttons();
 

hw/bsp/board.h

@@ -40,7 +40,10 @@
 
 #include "ansi_escape.h"
 
+#include "tusb.h"
+
 #define CFG_UART_BAUDRATE    115200
+
 #define BOARD_TICKS_HZ       1000
 #define board_tick2ms(tck)   ( ( ((uint64_t)(tck)) * 1000) / BOARD_TICKS_HZ )
 
@@ -64,8 +67,26 @@ int board_uart_read(uint8_t* buf, int len);
 // Send characters to UART
 int board_uart_write(void const * buf, int len);
 
-// Get current milliseconds with no rtos configure (TUSB_CFG_OS = OPT_OS_NONE)
-uint32_t board_noos_millis(void);
+#if CFG_TUSB_OS == OPT_OS_NONE
+
+// Get current milliseconds, must be implemented in board.c when no OS is used
+uint32_t board_millis(void);
+
+#elif CFG_TUSB_OS == OPT_OS_FREERTOS
+
+static inline uint32_t board_millis(void)
+{
+  return ( ( ((uint64_t) xTaskGetTickCount()) * 1000) / configTICK_RATE_HZ );
+}
+
+#elif CFG_TUSB_OS == OPT_OS_MYNEWT
+
+static inline uint32_t board_millis(void)
+{
+  return os_time_ticks_to_ms32( os_time_get() );
+}
+
+#endif
 
 //--------------------------------------------------------------------+
 // Helper functions

hw/bsp/ea4088qs/board_ea4088qs.c

@@ -24,13 +24,9 @@
  * This file is part of the TinyUSB stack.
  */
 
-#ifdef BOARD_EA4088QS
-
 #include "chip.h"
 #include "../board.h"
 
-#include "tusb_option.h"
-
 #define LED_PORT      2
 #define LED_PIN       19
 
@@ -175,11 +171,9 @@ uint32_t tusb_hal_millis(void)
   return board_tick2ms(system_ticks);
 }
 
-uint32_t board_noos_millis(void)
+uint32_t board_millis(void)
 {
   return system_ticks;
 }
 
 #endif
-
-#endif

hw/bsp/ea4357/board_ea4357.c

@@ -24,14 +24,10 @@
  * This file is part of the TinyUSB stack.
  */
 
-#ifdef BOARD_EA4357
-
 #include "chip.h"
 #include "../board.h"
 #include "pca9532.h"
 
-#include "tusb_option.h"
-
 #define BOARD_UART_PORT           LPC_USART0
 #define BOARD_UART_PIN_PORT       0x0f
 #define BOARD_UART_PIN_TX         10 // PF.10 : UART0_TXD
@@ -74,7 +70,7 @@ uint32_t tusb_hal_millis(void)
   return board_tick2ms(system_ticks);
 }
 
-uint32_t board_noos_millis(void)
+uint32_t board_millis(void)
 {
   return system_ticks;
 }
@@ -305,5 +301,3 @@ int board_uart_write(void const * buf, int len)
   (void) len;
   return 0;
 }
-
-#endif

hw/bsp/lpcxpresso11u68/board_lpcxpresso11u68.c

@@ -24,8 +24,6 @@
  * This file is part of the TinyUSB stack.
  */
 
-#ifdef BOARD_LPCXPRESSO11U68
-
 #include "chip.h"
 #include "../board.h"
 
@@ -110,7 +108,7 @@ uint32_t tusb_hal_millis(void)
   return board_tick2ms(system_ticks);
 }
 
-uint32_t board_noos_millis(void)
+uint32_t board_millis(void)
 {
   return system_ticks;
 }
@@ -153,5 +151,3 @@ int board_uart_write(void const * buf, int len)
   (void) len;
   return 0;
 }
-
-#endif

hw/bsp/lpcxpresso1347/board_lpcxpresso1347.c

@@ -24,8 +24,6 @@
  * This file is part of the TinyUSB stack.
  */
 
-#ifdef BOARD_LPCXPRESSO1347
-
 #include "chip.h"
 #include "../board.h"
 
@@ -83,10 +81,6 @@ void board_init(void)
 {
   SystemCoreClockUpdate();
 
-#if CFG_TUSB_OS == OPT_OS_NONE
-  SysTick_Config(SystemCoreClock / BOARD_TICKS_HZ); // 1 msec tick timer
-#endif
-
 #if CFG_TUSB_OS == OPT_OS_NONE
   // 1ms tick timer
   SysTick_Config(SystemCoreClock / 1000);
@@ -127,7 +121,7 @@ uint32_t tusb_hal_millis(void)
   return board_tick2ms(system_ticks);
 }
 
-uint32_t board_noos_millis(void)
+uint32_t board_millis(void)
 {
   return system_ticks;
 }
@@ -181,5 +175,3 @@ int board_uart_write(void const * buf, int len)
   (void) len;
   return 0;
 }
-
-#endif

hw/bsp/lpcxpresso1769/board_lpcxpresso1769.c

@@ -24,13 +24,9 @@
  * This file is part of the TinyUSB stack.
  */
 
-#ifdef BOARD_LPCXPRESSO1769
-
 #include "chip.h"
 #include "../board.h"
 
-#include "tusb_option.h"
-
 #define LED_PORT      0
 #define LED_PIN       22
 
@@ -163,7 +159,7 @@ uint32_t tusb_hal_millis(void)
   return board_tick2ms(system_ticks);
 }
 
-uint32_t board_noos_millis(void)
+uint32_t board_millis(void)
 {
   return system_ticks;
 }
@@ -217,5 +213,3 @@ int board_uart_write(void const * buf, int len)
   (void) len;
   return 0;
 }
-
-#endif

hw/bsp/mcb1800/board_mcb1800.c

@@ -24,13 +24,9 @@
  * This file is part of the TinyUSB stack.
  */
 
-#ifdef BOARD_MCB1800
-
 #include "chip.h"
 #include "../board.h"
 
-#include "tusb_option.h"
-
 #define LED_PORT  6
 #define LED_PIN   24
 
@@ -241,12 +237,9 @@ uint32_t tusb_hal_millis(void)
   return board_tick2ms(system_ticks);
 }
 
-uint32_t board_noos_millis(void)
+uint32_t board_millis(void)
 {
   return system_ticks;
 }
 
 #endif
-
-#endif
-

hw/bsp/metro_m0_express/board_metro_m0_express.c

@@ -35,8 +35,6 @@
 #include "hpl_pm_config.h"
 #include "hpl/pm/hpl_pm_base.h"
 
-#include "tusb_option.h"
-
 //--------------------------------------------------------------------+
 // MACRO TYPEDEF CONSTANT ENUM DECLARATION
 //--------------------------------------------------------------------+
@@ -120,7 +118,7 @@ uint32_t tusb_hal_millis(void)
   return board_tick2ms(system_ticks);
 }
 
-uint32_t board_noos_millis(void)
+uint32_t board_millis(void)
 {
   return system_ticks;
 }

hw/bsp/metro_m4_express/board_metro_m4_express.c

@@ -32,8 +32,6 @@
 #include "hpl/gclk/hpl_gclk_base.h"
 #include "hpl_mclk_config.h"
 
-#include "tusb_option.h"
-
 //--------------------------------------------------------------------+
 // MACRO TYPEDEF CONSTANT ENUM DECLARATION
 //--------------------------------------------------------------------+
@@ -109,7 +107,7 @@ uint32_t tusb_hal_millis(void)
   return board_tick2ms(system_ticks);
 }
 
-uint32_t board_noos_millis(void)
+uint32_t board_millis(void)
 {
   return system_ticks;
 }

hw/bsp/pca10056/board_pca10056.c

@@ -23,7 +23,6 @@
  *
  * This file is part of the TinyUSB stack.
  */
-#ifdef BOARD_PCA10056
 
 #include "bsp/board.h"
 
@@ -66,7 +65,7 @@ uint32_t tusb_hal_millis(void)
   return board_tick2ms(system_ticks);
 }
 
-uint32_t board_noos_millis(void)
+uint32_t board_millis(void)
 {
   return system_ticks;
 }
@@ -209,5 +208,3 @@ void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info)
   (void) info;
 }
 #endif
-
-#endif

hw/bsp/stm32f303disc/board_stm32f303disc.c

@@ -25,7 +25,6 @@
  */
 
 #include "../board.h"
-#include "tusb_option.h"
 
 #include "stm32f3xx.h"
 #include "stm32f3xx_hal_conf.h"
@@ -114,7 +113,7 @@ uint32_t tusb_hal_millis(void)
   return board_tick2ms(system_ticks);
 }
 
-uint32_t board_noos_millis(void)
+uint32_t board_millis(void)
 {
   return system_ticks;
 }

hw/bsp/stm32f407g_disc1/board_stm32f407g_disc1.c

@@ -28,8 +28,6 @@
 
 #include "stm32f4xx.h"
 
-#include "tusb_option.h"
-
 void board_init(void)
 {
   // Init the LED on PD14
@@ -110,7 +108,7 @@ uint32_t tusb_hal_millis(void)
   return board_tick2ms(system_ticks);
 }
 
-uint32_t board_noos_millis(void)
+uint32_t board_millis(void)
 {
   return system_ticks;
 }