change to use nrfx uarte

examples/device/board_test/src/main.c

@@ -51,7 +51,6 @@ int main(void)
   uint32_t start_ms = 0;
   bool led_state = false;
 
-
   while (1)
   {
     uint32_t interval_ms = board_button_read() ? BLINK_PRESSED : BLINK_UNPRESSED;

hw/bsp/pca10056/board.mk

@@ -24,7 +24,7 @@ LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk
 
 SRC_C += \
 	hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \
-	hw/mcu/nordic/nrfx/drivers/src/nrfx_uart.c \
+	hw/mcu/nordic/nrfx/drivers/src/nrfx_uarte.c \
 	hw/mcu/nordic/nrfx/mdk/system_nrf52840.c \
 
 INC += \

hw/bsp/pca10056/pca10056.c

@@ -29,7 +29,7 @@
 #include "nrfx.h"
 #include "nrfx/hal/nrf_gpio.h"
 #include "nrfx/drivers/include/nrfx_power.h"
-#include "nrfx/drivers/include/nrfx_uart.h"
+#include "nrfx/drivers/include/nrfx_uarte.h"
 
 #ifdef SOFTDEVICE_PRESENT
 #include "nrf_sdm.h"
@@ -48,7 +48,7 @@
 #define UART_RX_PIN           8
 #define UART_TX_PIN           6
 
-static nrfx_uart_t _uart_id = NRFX_UART_INSTANCE(0);
+static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(0);
 //static void uart_handler(nrfx_uart_event_t const * p_event, void* p_context);
 
 // tinyusb function that handles power event (detected, ready, removed)
@@ -77,19 +77,20 @@ void board_init(void)
 #endif
 
   // UART
-  nrfx_uart_config_t uart_cfg =
+  nrfx_uarte_config_t uart_cfg =
   {
     .pseltxd   = UART_TX_PIN,
     .pselrxd   = UART_RX_PIN,
-    .pselcts   = NRF_UART_PSEL_DISCONNECTED,
-    .pselrts   = NRF_UART_PSEL_DISCONNECTED,
+    .pselcts   = NRF_UARTE_PSEL_DISCONNECTED,
+    .pselrts   = NRF_UARTE_PSEL_DISCONNECTED,
     .p_context = NULL,
-    .hwfc      = NRF_UART_HWFC_DISABLED,
-    .parity    = NRF_UART_PARITY_EXCLUDED,
-    .baudrate  = NRF_UART_BAUDRATE_115200 // CFG_BOARD_UART_BAUDRATE
+    .hwfc      = NRF_UARTE_HWFC_DISABLED,
+    .parity    = NRF_UARTE_PARITY_EXCLUDED,
+    .baudrate  = NRF_UARTE_BAUDRATE_115200, // CFG_BOARD_UART_BAUDRATE
+    .interrupt_priority = 7
   };
 
-  nrfx_uart_init(&_uart_id, &uart_cfg, NULL); //uart_handler);
+  nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler);
 
 #if TUSB_OPT_DEVICE_ENABLED
   // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice
@@ -161,7 +162,7 @@ int board_uart_read(uint8_t* buf, int len)
 
 int board_uart_write(void const * buf, int len)
 {
-  return (NRFX_SUCCESS == nrfx_uart_tx(&_uart_id, (uint8_t const*) buf, (size_t) len)) ? len : 0;
+  return (NRFX_SUCCESS == nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len)) ? len : 0;
 }
 
 #if CFG_TUSB_OS == OPT_OS_NONE

hw/mcu/nordic/nrfx_config.h

@@ -1,879 +1,10 @@
 #ifndef NRFX_CONFIG_H__
 #define NRFX_CONFIG_H__
 
-#define NRFX_PRS_ENABLED 0
-#define NRFX_CLOCK_ENABLED 0
+#define NRFX_POWER_ENABLED              1
+#define NRFX_POWER_CONFIG_IRQ_PRIORITY  7
 
-// <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver
-//==========================================================
-#ifndef NRFX_POWER_ENABLED
-#define NRFX_POWER_ENABLED 1
-#endif
-// <o> NRFX_POWER_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY
-#define NRFX_POWER_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN  - The default configuration of main DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCENHV  - The default configuration of High Voltage DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0
-#endif
-
-// </e>
-
-
-// <e> NRFX_QSPI_ENABLED - nrfx_qspi - QSPI peripheral driver
-//==========================================================
-#ifndef NRFX_QSPI_ENABLED
-#define NRFX_QSPI_ENABLED 1
-#endif
-// <o> NRFX_QSPI_CONFIG_SCK_DELAY - tSHSL, tWHSL and tSHWL in number of 16 MHz periods (62.5 ns).  <0-255>
-
-
-#ifndef NRFX_QSPI_CONFIG_SCK_DELAY
-#define NRFX_QSPI_CONFIG_SCK_DELAY 1
-#endif
-
-// <o> NRFX_QSPI_CONFIG_XIP_OFFSET - Address offset in the external memory for Execute in Place operation.
-#ifndef NRFX_QSPI_CONFIG_XIP_OFFSET
-#define NRFX_QSPI_CONFIG_XIP_OFFSET 0
-#endif
-
-// <o> NRFX_QSPI_CONFIG_READOC  - Number of data lines and opcode used for reading.
-
-// <0=> FastRead
-// <1=> Read2O
-// <2=> Read2IO
-// <3=> Read4O
-// <4=> Read4IO
-
-#ifndef NRFX_QSPI_CONFIG_READOC
-#define NRFX_QSPI_CONFIG_READOC 0
-#endif
-
-// <o> NRFX_QSPI_CONFIG_WRITEOC  - Number of data lines and opcode used for writing.
-
-// <0=> PP
-// <1=> PP2O
-// <2=> PP4O
-// <3=> PP4IO
-
-#ifndef NRFX_QSPI_CONFIG_WRITEOC
-#define NRFX_QSPI_CONFIG_WRITEOC 0
-#endif
-
-// <o> NRFX_QSPI_CONFIG_ADDRMODE  - Addressing mode.
-
-// <0=> 24bit
-// <1=> 32bit
-
-#ifndef NRFX_QSPI_CONFIG_ADDRMODE
-#define NRFX_QSPI_CONFIG_ADDRMODE 0
-#endif
-
-// <o> NRFX_QSPI_CONFIG_MODE  - SPI mode.
-
-// <0=> Mode 0
-// <1=> Mode 1
-
-#ifndef NRFX_QSPI_CONFIG_MODE
-#define NRFX_QSPI_CONFIG_MODE 0
-#endif
-
-// <o> NRFX_QSPI_CONFIG_FREQUENCY  - Frequency divider.
-
-// <0=> 32MHz/1
-// <1=> 32MHz/2
-// <2=> 32MHz/3
-// <3=> 32MHz/4
-// <4=> 32MHz/5
-// <5=> 32MHz/6
-// <6=> 32MHz/7
-// <7=> 32MHz/8
-// <8=> 32MHz/9
-// <9=> 32MHz/10
-// <10=> 32MHz/11
-// <11=> 32MHz/12
-// <12=> 32MHz/13
-// <13=> 32MHz/14
-// <14=> 32MHz/15
-// <15=> 32MHz/16
-
-#ifndef NRFX_QSPI_CONFIG_FREQUENCY
-#define NRFX_QSPI_CONFIG_FREQUENCY 15
-#endif
-
-// <s> NRFX_QSPI_PIN_SCK - SCK pin value.
-#ifndef NRFX_QSPI_PIN_SCK
-#define NRFX_QSPI_PIN_SCK NRF_QSPI_PIN_NOT_CONNECTED
-#endif
-
-// <s> NRFX_QSPI_PIN_CSN - CSN pin value.
-#ifndef NRFX_QSPI_PIN_CSN
-#define NRFX_QSPI_PIN_CSN NRF_QSPI_PIN_NOT_CONNECTED
-#endif
-
-// <s> NRFX_QSPI_PIN_IO0 - IO0 pin value.
-#ifndef NRFX_QSPI_PIN_IO0
-#define NRFX_QSPI_PIN_IO0 NRF_QSPI_PIN_NOT_CONNECTED
-#endif
-
-// <s> NRFX_QSPI_PIN_IO1 - IO1 pin value.
-#ifndef NRFX_QSPI_PIN_IO1
-#define NRFX_QSPI_PIN_IO1 NRF_QSPI_PIN_NOT_CONNECTED
-#endif
-
-// <s> NRFX_QSPI_PIN_IO2 - IO2 pin value.
-#ifndef NRFX_QSPI_PIN_IO2
-#define NRFX_QSPI_PIN_IO2 NRF_QSPI_PIN_NOT_CONNECTED
-#endif
-
-// <s> NRFX_QSPI_PIN_IO3 - IO3 pin value.
-#ifndef NRFX_QSPI_PIN_IO3
-#define NRFX_QSPI_PIN_IO3 NRF_QSPI_PIN_NOT_CONNECTED
-#endif
-
-// <o> NRFX_QSPI_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_QSPI_CONFIG_IRQ_PRIORITY
-#define NRFX_QSPI_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// </e>
-
-// <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver
-//==========================================================
-#ifndef NRFX_RNG_ENABLED
-#define NRFX_RNG_ENABLED 1
-#endif
-// <q> NRFX_RNG_CONFIG_ERROR_CORRECTION  - Error correction
-
-
-#ifndef NRFX_RNG_CONFIG_ERROR_CORRECTION
-#define NRFX_RNG_CONFIG_ERROR_CORRECTION 1
-#endif
-
-// <o> NRFX_RNG_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RNG_CONFIG_IRQ_PRIORITY
-#define NRFX_RNG_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RNG_CONFIG_LOG_ENABLED
-#define NRFX_RNG_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RNG_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RNG_CONFIG_LOG_LEVEL
-#define NRFX_RNG_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_INFO_COLOR
-#define NRFX_RNG_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_DEBUG_COLOR
-#define NRFX_RNG_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
-//==========================================================
-#ifndef NRFX_RTC_ENABLED
-#define NRFX_RTC_ENABLED 1
-#endif
-// <q> NRFX_RTC0_ENABLED  - Enable RTC0 instance
-
-
-#ifndef NRFX_RTC0_ENABLED
-#define NRFX_RTC0_ENABLED 1
-#endif
-
-// <q> NRFX_RTC1_ENABLED  - Enable RTC1 instance
-
-
-#ifndef NRFX_RTC1_ENABLED
-#define NRFX_RTC1_ENABLED 1
-#endif
-
-// <q> NRFX_RTC2_ENABLED  - Enable RTC2 instance
-
-
-#ifndef NRFX_RTC2_ENABLED
-#define NRFX_RTC2_ENABLED 1
-#endif
-
-// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt
-#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
-#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768>
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
-#endif
-
-// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
-#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
-#define NRFX_RTC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RTC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
-#define NRFX_RTC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_INFO_COLOR
-#define NRFX_RTC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
-#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-
-// <e> NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator
-//==========================================================
-#ifndef NRFX_SWI_ENABLED
-#define NRFX_SWI_ENABLED 1
-#endif
-// <q> NRFX_EGU_ENABLED  - Enable EGU support
-
-
-#ifndef NRFX_EGU_ENABLED
-#define NRFX_EGU_ENABLED 0
-#endif
-
-// <q> NRFX_SWI0_DISABLED  - Exclude SWI0 from being utilized by the driver
-
-
-#ifndef NRFX_SWI0_DISABLED
-#define NRFX_SWI0_DISABLED 0
-#endif
-
-// <q> NRFX_SWI1_DISABLED  - Exclude SWI1 from being utilized by the driver
-
-
-#ifndef NRFX_SWI1_DISABLED
-#define NRFX_SWI1_DISABLED 0
-#endif
-
-// <q> NRFX_SWI2_DISABLED  - Exclude SWI2 from being utilized by the driver
-
-
-#ifndef NRFX_SWI2_DISABLED
-#define NRFX_SWI2_DISABLED 0
-#endif
-
-// <q> NRFX_SWI3_DISABLED  - Exclude SWI3 from being utilized by the driver
-
-
-#ifndef NRFX_SWI3_DISABLED
-#define NRFX_SWI3_DISABLED 0
-#endif
-
-// <q> NRFX_SWI4_DISABLED  - Exclude SWI4 from being utilized by the driver
-
-
-#ifndef NRFX_SWI4_DISABLED
-#define NRFX_SWI4_DISABLED 0
-#endif
-
-// <q> NRFX_SWI5_DISABLED  - Exclude SWI5 from being utilized by the driver
-
-
-#ifndef NRFX_SWI5_DISABLED
-#define NRFX_SWI5_DISABLED 0
-#endif
-
-// <e> NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SWI_CONFIG_LOG_ENABLED
-#define NRFX_SWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SWI_CONFIG_LOG_LEVEL
-#define NRFX_SWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_INFO_COLOR
-#define NRFX_SWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_DEBUG_COLOR
-#define NRFX_SWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <q> NRFX_SYSTICK_ENABLED  - nrfx_systick - ARM(R) SysTick driver
-
-
-#ifndef NRFX_SYSTICK_ENABLED
-#define NRFX_SYSTICK_ENABLED 1
-#endif
-
-// <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver
-//==========================================================
-#ifndef NRFX_TIMER_ENABLED
-#define NRFX_TIMER_ENABLED 1
-#endif
-// <q> NRFX_TIMER0_ENABLED  - Enable TIMER0 instance
-
-
-#ifndef NRFX_TIMER0_ENABLED
-#define NRFX_TIMER0_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER1_ENABLED  - Enable TIMER1 instance
-
-
-#ifndef NRFX_TIMER1_ENABLED
-#define NRFX_TIMER1_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER2_ENABLED  - Enable TIMER2 instance
-
-
-#ifndef NRFX_TIMER2_ENABLED
-#define NRFX_TIMER2_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER3_ENABLED  - Enable TIMER3 instance
-
-
-#ifndef NRFX_TIMER3_ENABLED
-#define NRFX_TIMER3_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER4_ENABLED  - Enable TIMER4 instance
-
-
-#ifndef NRFX_TIMER4_ENABLED
-#define NRFX_TIMER4_ENABLED 1
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY  - Timer frequency if in Timer mode
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-// <8=> 62.5 kHz
-// <9=> 31.25 kHz
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_MODE  - Timer mode or operation
-
-// <0=> Timer
-// <1=> Counter
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_MODE
-#define NRFX_TIMER_DEFAULT_CONFIG_MODE 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH  - Timer counter bit width
-
-// <0=> 16 bit
-// <1=> 8 bit
-// <2=> 24 bit
-// <3=> 32 bit
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH
-#define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TIMER_CONFIG_LOG_ENABLED
-#define NRFX_TIMER_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TIMER_CONFIG_LOG_LEVEL
-#define NRFX_TIMER_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_INFO_COLOR
-#define NRFX_TIMER_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR
-#define NRFX_TIMER_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
-//==========================================================
-#ifndef NRFX_UARTE_ENABLED
-#define NRFX_UARTE_ENABLED 1
-#endif
-// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance
-#ifndef NRFX_UARTE0_ENABLED
-#define NRFX_UARTE0_ENABLED 1
-#endif
-
-// <o> NRFX_UARTE1_ENABLED - Enable UARTE1 instance
-#ifndef NRFX_UARTE1_ENABLED
-#define NRFX_UARTE1_ENABLED 1
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
-#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
-#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3862528=> 14400 baud
-// <5152768=> 19200 baud
-// <7716864=> 28800 baud
-// <8388608=> 31250 baud
-// <10289152=> 38400 baud
-// <15007744=> 56000 baud
-// <15400960=> 57600 baud
-// <20615168=> 76800 baud
-// <30801920=> 115200 baud
-// <61865984=> 230400 baud
-// <67108864=> 250000 baud
-// <121634816=> 460800 baud
-// <251658240=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
-#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
-#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
-#define NRFX_UARTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
-#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
-//==========================================================
-#ifndef NRFX_UART_ENABLED
-#define NRFX_UART_ENABLED 1
-#endif
-// <o> NRFX_UART0_ENABLED - Enable UART0 instance
-#ifndef NRFX_UART0_ENABLED
-#define NRFX_UART0_ENABLED 1
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
-#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
-#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3866624=> 14400 baud
-// <5152768=> 19200 baud
-// <7729152=> 28800 baud
-// <8388608=> 31250 baud
-// <10309632=> 38400 baud
-// <15007744=> 56000 baud
-// <15462400=> 57600 baud
-// <20615168=> 76800 baud
-// <30924800=> 115200 baud
-// <61845504=> 230400 baud
-// <67108864=> 250000 baud
-// <123695104=> 460800 baud
-// <247386112=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UART_CONFIG_LOG_ENABLED
-#define NRFX_UART_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UART_CONFIG_LOG_LEVEL
-#define NRFX_UART_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_INFO_COLOR
-#define NRFX_UART_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
-#define NRFX_UART_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-
-// </e>
-
-// </e>
-
-// </h>
+#define NRFX_UARTE_ENABLED   1
+#define NRFX_UARTE0_ENABLED  1
 
 #endif // NRFX_CONFIG_H__