added mcb4300 to all host lpcxpresso project

boards/keil/board_mcb4300.c

@@ -73,7 +73,10 @@ const static struct {
 void board_init(void)
 {
   CGU_Init();
+
+#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
   SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / TUSB_CFG_TICKS_HZ); // 1 msec tick timer
+#endif
 
   //------------- USB Bus power HOST ONLY-------------//
   // Keil VBUS0 is P6_3
@@ -97,20 +100,17 @@ void board_init(void)
     GPIO_SetDir(leds[i].port, BIT_(leds[i].pin), 1); // output
   }
 
-  //------------- UART init -------------//
-  #if CFG_UART_ENABLE
-	scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN             , FUNC1);
-	scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN|MD_EZI|MD_ZI, FUNC1);
+  //------------- UART -------------//
+  scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN             , FUNC1);
+  scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN|MD_EZI|MD_ZI, FUNC1);
 
-	UART_CFG_Type UARTConfigStruct;
+  UART_CFG_Type UARTConfigStruct;
   UART_ConfigStructInit(&UARTConfigStruct);
-	UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
-	UARTConfigStruct.Clock_Speed = 0;
-
-	UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
-	UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
-  #endif
+  UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
+  UARTConfigStruct.Clock_Speed = 0;
 
+  UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
+  UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
 }
 
 //--------------------------------------------------------------------+
@@ -130,19 +130,25 @@ void board_leds(uint32_t on_mask, uint32_t off_mask)
   }
 }
 
+//--------------------------------------------------------------------+
+// BUTTONS
+//--------------------------------------------------------------------+
+uint32_t board_buttons(void)
+{
+  return 0; // TODO buttons for mcb4300
+}
+
 //--------------------------------------------------------------------+
 // UART
 //--------------------------------------------------------------------+
-#if CFG_UART_ENABLE
-uint32_t board_uart_send(uint8_t *buffer, uint32_t length)
+uint8_t  board_uart_getchar(void)
 {
-  return UART_Send(BOARD_UART_PORT, buffer, length, BLOCKING);
+  return UART_ReceiveByte(BOARD_UART_PORT);
 }
 
-uint32_t board_uart_recv(uint8_t *buffer, uint32_t length)
+void board_uart_putchar(uint8_t c)
 {
-  return UART_Receive(BOARD_UART_PORT, buffer, length, BLOCKING);
+  UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING);
 }
-#endif
 
 #endif

boards/keil/board_mcb4300.h

@@ -49,7 +49,7 @@
  extern "C" {
 #endif
 
-#define CFG_PRINTF_TARGET       PRINTF_TARGET_SEMIHOST
+#define CFG_PRINTF_TARGET       PRINTF_TARGET_UART
 
 
 #ifdef __cplusplus

demos/host/host_cmsis_rtx/.cproject

@@ -75,7 +75,7 @@
 								</option>
 								<option id="gnu.c.link.option.libs.1088600788" name="Libraries (-l)" superClass="gnu.c.link.option.libs"/>
 								<option id="gnu.c.link.option.paths.1352371726" name="Library search path (-L)" superClass="gnu.c.link.option.paths"/>
-								<option id="com.crt.advproject.link.gcc.hdrlib.1912639139" name="Library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.gcc.hdrlib.1912639139" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.fpu.1071054814" name="Floating point" superClass="com.crt.advproject.link.fpu" value="com.crt.advproject.link.fpu.fpv4" valueType="enumerated"/>
 								<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1768732506" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
 									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
@@ -175,7 +175,7 @@
 								<option id="gnu.c.link.option.paths.916077707" name="Library search path (-L)" superClass="gnu.c.link.option.paths" valueType="libPaths">
 									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/cmsis_rtos_rtx/LIB/GCC}&quot;"/>
 								</option>
-								<option id="com.crt.advproject.link.gcc.hdrlib.1015545513" name="Library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.nohost" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.gcc.hdrlib.1015545513" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.nohost" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.fpu.834301167" name="Floating point" superClass="com.crt.advproject.link.fpu" value="com.crt.advproject.link.fpu.fpv4.hard" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.gcc.multicore.slave.1674664189" name="Multicore slave" superClass="com.crt.advproject.link.gcc.multicore.slave"/>
 								<option id="com.crt.advproject.link.gcc.multicore.master.413285924" name="Multicore" superClass="com.crt.advproject.link.gcc.multicore.master"/>
@@ -277,7 +277,7 @@
 								<option id="gnu.c.link.option.paths.1185436199" name="Library search path (-L)" superClass="gnu.c.link.option.paths" valueType="libPaths">
 									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/cmsis_rtos_rtx/LIB/GCC}&quot;"/>
 								</option>
-								<option id="com.crt.advproject.link.gcc.hdrlib.1376822718" name="Library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.nohost" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.gcc.hdrlib.1376822718" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.nohost" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.fpu.1096421602" name="Floating point" superClass="com.crt.advproject.link.fpu" value="com.crt.advproject.link.fpu.none" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.gcc.multicore.slave.1605384275" name="Multicore slave" superClass="com.crt.advproject.link.gcc.multicore.slave"/>
 								<option id="com.crt.advproject.link.gcc.multicore.master.122348860" name="Multicore" superClass="com.crt.advproject.link.gcc.multicore.master"/>
@@ -298,6 +298,108 @@
 			<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
 			<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
 		</cconfiguration>
+		<cconfiguration id="com.crt.advproject.config.exe.debug.1239969983.636406670.1028759153">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.crt.advproject.config.exe.debug.1239969983.636406670.1028759153" moduleId="org.eclipse.cdt.core.settings" name="Board MCB4300">
+				<macros>
+					<stringMacro name="CFLAGS_OFF" type="VALUE_TEXT" value=""/>
+					<stringMacro name="CFLAGS_ON" type="VALUE_TEXT" value="-pedantic -Wextra -Wswitch-default -Wunsafe-loop-optimizations -Wcast-align -Wlogical-op -Wpacked-bitfield-compat -Wpadded -Wnested-externs -Wredundant-decls -Winline -Wpacked"/>
+					<stringMacro name="CFLAGS" type="VALUE_TEXT" value="${CFLAGS_OFF}"/>
+				</macros>
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.MakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+					<extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactExtension="axf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="not tested" errorParsers="org.eclipse.cdt.core.MakeErrorParser;org.eclipse.cdt.core.GCCErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.GASErrorParser;org.eclipse.cdt.core.CWDLocator;org.eclipse.cdt.core.GmakeErrorParser" id="com.crt.advproject.config.exe.debug.1239969983.636406670.1028759153" name="Board MCB4300" parent="com.crt.advproject.config.exe.debug" postannouncebuildStep="Performing post-build steps" postbuildStep="arm-none-eabi-size &quot;${BuildArtifactFileName}&quot;; # arm-none-eabi-objcopy -O binary &quot;${BuildArtifactFileName}&quot; &quot;${BuildArtifactFileBaseName}.bin&quot; ; checksum -p ${TargetChip} -d &quot;${BuildArtifactFileBaseName}.bin&quot;;  " preannouncebuildStep="" prebuildStep="">
+					<folderInfo id="com.crt.advproject.config.exe.debug.1239969983.636406670.1028759153." name="/" resourcePath="">
+						<toolChain errorParsers="" id="com.crt.advproject.toolchain.exe.debug.1077805933" name="Code Red MCU Tools" superClass="com.crt.advproject.toolchain.exe.debug">
+							<targetPlatform binaryParser="org.eclipse.cdt.core.ELF;org.eclipse.cdt.core.GNU_ELF" id="com.crt.advproject.platform.exe.debug.2114181122" name="ARM-based MCU (Debug)" superClass="com.crt.advproject.platform.exe.debug"/>
+							<builder buildPath="${workspace_loc:/host/Debug}" errorParsers="org.eclipse.cdt.core.GmakeErrorParser;org.eclipse.cdt.core.CWDLocator" id="com.crt.advproject.builder.exe.debug.1285194569" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="com.crt.advproject.builder.exe.debug"/>
+							<tool id="com.crt.advproject.cpp.exe.debug.1776331008" name="MCU C++ Compiler" superClass="com.crt.advproject.cpp.exe.debug"/>
+							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${CFLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.crt.advproject.gcc.exe.debug.619849338" name="MCU C Compiler" superClass="com.crt.advproject.gcc.exe.debug">
+								<option id="com.crt.advproject.gcc.arch.1529087861" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.gcc.thumb.991498800" name="Thumb mode" superClass="com.crt.advproject.gcc.thumb" value="true" valueType="boolean"/>
+								<option id="gnu.c.compiler.option.preprocessor.def.symbols.47567687" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" valueType="definedSymbols">
+									<listOptionValue builtIn="false" value="__REDLIB__"/>
+									<listOptionValue builtIn="false" value="__CORTEX_M4F"/>
+									<listOptionValue builtIn="false" value="__CMSIS_RTOS "/>
+									<listOptionValue builtIn="false" value="__FPU_PRESENT"/>
+									<listOptionValue builtIn="false" value="__USE_CMSIS"/>
+									<listOptionValue builtIn="false" value="CORE_M4"/>
+									<listOptionValue builtIn="false" value="TUSB_CFG_MCU=MCU_LPC43XX"/>
+									<listOptionValue builtIn="false" value="BOARD=BOARD_MCB4300"/>
+									<listOptionValue builtIn="false" value="TUSB_CFG_OS=TUSB_OS_CMSIS_RTX"/>
+									<listOptionValue builtIn="false" value="TUSB_CFG_OS_TASK_PRIO=osPriorityRealtime"/>
+									<listOptionValue builtIn="false" value="DEBUG"/>
+									<listOptionValue builtIn="false" value="__CODE_RED"/>
+								</option>
+								<option id="gnu.c.compiler.option.misc.other.205571236" name="Other flags" superClass="gnu.c.compiler.option.misc.other" value="-c -fmessage-length=0 -fno-builtin -ffunction-sections -fdata-sections" valueType="string"/>
+								<option id="gnu.c.compiler.option.include.paths.1710816469" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" valueType="includePath">
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/boards}&quot;"/>
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/fatfs}&quot;"/>
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/inc}&quot;"/>
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/cmsis_rtos_rtx/INC}&quot;"/>
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/tinyusb}&quot;"/>
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/src}&quot;"/>
+								</option>
+								<option id="com.crt.advproject.c.misc.dialect.242108687" name="C Dialect" superClass="com.crt.advproject.c.misc.dialect" value="com.crt.advproject.misc.dialect.gnu99" valueType="enumerated"/>
+								<option id="com.crt.advproject.gcc.fpu.1657536811" name="Floating point" superClass="com.crt.advproject.gcc.fpu" value="com.crt.advproject.gcc.fpu.fpv4.hard" valueType="enumerated"/>
+								<inputType id="com.crt.advproject.compiler.input.2047006659" superClass="com.crt.advproject.compiler.input"/>
+							</tool>
+							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GASErrorParser" id="com.crt.advproject.gas.exe.debug.2105223786" name="MCU Assembler" superClass="com.crt.advproject.gas.exe.debug">
+								<option id="com.crt.advproject.gas.arch.609002140" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.gas.thumb.1277523396" name="Thumb mode" superClass="com.crt.advproject.gas.thumb" value="true" valueType="boolean"/>
+								<option id="gnu.both.asm.option.flags.crt.1564329420" name="Assembler flags" superClass="gnu.both.asm.option.flags.crt" value="-c -x assembler-with-cpp -D__REDLIB__ -DDEBUG -D__CODE_RED" valueType="string"/>
+								<option id="com.crt.advproject.gas.fpu.1997678725" name="Floating point" superClass="com.crt.advproject.gas.fpu" value="com.crt.advproject.gas.fpu.fpv4.hard" valueType="enumerated"/>
+								<inputType id="com.crt.advproject.assembler.input.1255951929" name="Additional Assembly Source Files" superClass="com.crt.advproject.assembler.input"/>
+								<inputType id="cdt.managedbuild.tool.gnu.assembler.input.797829349" superClass="cdt.managedbuild.tool.gnu.assembler.input"/>
+							</tool>
+							<tool id="com.crt.advproject.link.cpp.exe.debug.1900294325" name="MCU C++ Linker" superClass="com.crt.advproject.link.cpp.exe.debug"/>
+							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GLDErrorParser" id="com.crt.advproject.link.exe.debug.1504055209" name="MCU Linker" superClass="com.crt.advproject.link.exe.debug">
+								<option id="com.crt.advproject.link.arch.1071981976" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.thumb.1280965025" name="Thumb mode" superClass="com.crt.advproject.link.thumb" value="true" valueType="boolean"/>
+								<option id="com.crt.advproject.link.script.1619199675" name="Linker script" superClass="com.crt.advproject.link.script" value="&quot;host_cmsis_rtx_Board_EA4357.ld&quot;" valueType="string"/>
+								<option id="com.crt.advproject.link.manage.1840945088" name="Manage linker script" superClass="com.crt.advproject.link.manage" value="true" valueType="boolean"/>
+								<option id="gnu.c.link.option.nostdlibs.745328522" name="No startup or default libs (-nostdlib)" superClass="gnu.c.link.option.nostdlibs" value="true" valueType="boolean"/>
+								<option id="gnu.c.link.option.other.1659973052" name="Other options (-Xlinker [option])" superClass="gnu.c.link.option.other" valueType="stringList">
+									<listOptionValue builtIn="false" value="-Map=&quot;${BuildArtifactFileBaseName}.map&quot;"/>
+									<listOptionValue builtIn="false" value="--gc-sections"/>
+								</option>
+								<option id="gnu.c.link.option.libs.237554964" name="Libraries (-l)" superClass="gnu.c.link.option.libs" valueType="libs">
+									<listOptionValue builtIn="false" value="RTX_CM4"/>
+								</option>
+								<option id="gnu.c.link.option.paths.715959224" name="Library search path (-L)" superClass="gnu.c.link.option.paths" valueType="libPaths">
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/cmsis_rtos_rtx/LIB/GCC}&quot;"/>
+								</option>
+								<option id="com.crt.advproject.link.gcc.hdrlib.411801202" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.nohost" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.fpu.1713572194" name="Floating point" superClass="com.crt.advproject.link.fpu" value="com.crt.advproject.link.fpu.fpv4.hard" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.gcc.multicore.slave.1674664189.1636251285" name="Multicore slave" superClass="com.crt.advproject.link.gcc.multicore.slave"/>
+								<option id="com.crt.advproject.link.gcc.multicore.master.413285924.1459162754" name="Multicore" superClass="com.crt.advproject.link.gcc.multicore.master"/>
+								<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1669582628" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
+									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
+									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
+								</inputType>
+							</tool>
+						</toolChain>
+					</folderInfo>
+					<sourceEntries>
+						<entry excluding="cmsis_rtos_rtx/SRC|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/sdio.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_wwdt.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_timer.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_ssp.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_sdmmc.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_sdif.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_sct.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_rtc.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_rit.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_rgu.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_qei.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_pwr.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_nvic.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_mcpwm.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_lcd.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_i2s.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_gpdma.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_evrt.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_emc.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_dac.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_can.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_atimer.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_adc.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/LCDTerm.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/Font5x7.c|mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/src/debug_frmwrk.c|mcu/lpc175x_6x|mcu/lpc13uxx|mcu/lpc11uxx|freertos/freertoslpc/FreeRTOS_lpc43xx_m0_Tick.c|freertos/freertos/Source/portable" flags="VALUE_WORKSPACE_PATH" kind="sourcePath" name=""/>
+					</sourceEntries>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+			<storageModule moduleId="org.eclipse.cdt.core.language.mapping"/>
+			<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+			<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
+		</cconfiguration>
 	</storageModule>
 	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
 		<project id="host.com.crt.advproject.projecttype.exe.1859815870" name="Executable" projectType="com.crt.advproject.projecttype.exe"/>
@@ -306,7 +408,10 @@
 		<projectStorage>&lt;?xml version="1.0" encoding="UTF-8"?&gt;&#13;
 &lt;TargetConfig&gt;&#13;
 &lt;Properties property_0="" property_2="LPC18x7_43x7_2x512_BootA.cfx" property_3="NXP" property_4="LPC4357" property_count="5" version="60100"/&gt;&#13;
-&lt;infoList vendor="NXP"&gt;&lt;info chip="LPC4357" flash_driver="LPC18x7_43x7_2x512_BootA.cfx" match_id="0x0" name="LPC4357" resetscript="LPC18LPC43InternalFLASHBootResetscript.scp" stub="crt_emu_lpc18_43_nxp"&gt;&lt;chip&gt;&lt;name&gt;LPC4357&lt;/name&gt;&#13;
+&lt;infoList vendor="NXP"&gt;&#13;
+&lt;info chip="LPC4357" flash_driver="LPC18x7_43x7_2x512_BootA.cfx" match_id="0x0" name="LPC4357" resetscript="LPC18LPC43InternalFLASHBootResetscript.scp" stub="crt_emu_lpc18_43_nxp"&gt;&#13;
+&lt;chip&gt;&#13;
+&lt;name&gt;LPC4357&lt;/name&gt;&#13;
 &lt;family&gt;LPC43xx&lt;/family&gt;&#13;
 &lt;vendor&gt;NXP (formerly Philips)&lt;/vendor&gt;&#13;
 &lt;reset board="None" core="Real" sys="Real"/&gt;&#13;
@@ -381,7 +486,8 @@
 &lt;peripheralInstance derived_from="SPI" determined="infoFile" id="SPI" location="0x40100000"/&gt;&#13;
 &lt;peripheralInstance derived_from="SGPIO" determined="infoFile" id="SGPIO" location="0x40101000"/&gt;&#13;
 &lt;/chip&gt;&#13;
-&lt;processor&gt;&lt;name gcc_name="cortex-m4"&gt;Cortex-M4&lt;/name&gt;&#13;
+&lt;processor&gt;&#13;
+&lt;name gcc_name="cortex-m4"&gt;Cortex-M4&lt;/name&gt;&#13;
 &lt;family&gt;Cortex-M&lt;/family&gt;&#13;
 &lt;/processor&gt;&#13;
 &lt;link href="nxp_lpc43xx_peripheral.xme" show="embed" type="simple"/&gt;&#13;

demos/host/host_os_none/.cproject

@@ -75,7 +75,7 @@
 								</option>
 								<option id="gnu.c.link.option.libs.1088600788" name="Libraries (-l)" superClass="gnu.c.link.option.libs"/>
 								<option id="gnu.c.link.option.paths.1352371726" name="Library search path (-L)" superClass="gnu.c.link.option.paths"/>
-								<option id="com.crt.advproject.link.gcc.hdrlib.1912639139" name="Library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.gcc.hdrlib.1912639139" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.fpu.1467962306" name="Floating point" superClass="com.crt.advproject.link.fpu" value="com.crt.advproject.link.fpu.fpv4" valueType="enumerated"/>
 								<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1768732506" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
 									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
@@ -167,7 +167,7 @@
 								</option>
 								<option id="gnu.c.link.option.libs.1825587478" name="Libraries (-l)" superClass="gnu.c.link.option.libs"/>
 								<option id="gnu.c.link.option.paths.916077707" name="Library search path (-L)" superClass="gnu.c.link.option.paths"/>
-								<option id="com.crt.advproject.link.gcc.hdrlib.1015545513" name="Library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.gcc.hdrlib.1015545513" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.fpu.409118044" name="Floating point" superClass="com.crt.advproject.link.fpu" value="com.crt.advproject.link.fpu.fpv4" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.gcc.multicore.slave.807948498" name="Multicore slave" superClass="com.crt.advproject.link.gcc.multicore.slave"/>
 								<option id="com.crt.advproject.link.gcc.multicore.master.1340978016" name="Multicore" superClass="com.crt.advproject.link.gcc.multicore.master"/>
@@ -220,7 +220,7 @@
 								<option id="com.crt.advproject.gcc.thumb.48684905" name="Thumb mode" superClass="com.crt.advproject.gcc.thumb" value="true" valueType="boolean"/>
 								<option id="gnu.c.compiler.option.preprocessor.def.symbols.1721043515" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" valueType="definedSymbols">
 									<listOptionValue builtIn="false" value="__REDLIB__"/>
-									<listOptionValue builtIn="false" value="__USE_CMSIS=CMSIS_LPC43xx_DriverLib"/>
+									<listOptionValue builtIn="false" value="__USE_CMSIS"/>
 									<listOptionValue builtIn="false" value="CORE_M4"/>
 									<listOptionValue builtIn="false" value="TUSB_CFG_MCU=MCU_LPC43XX"/>
 									<listOptionValue builtIn="false" value="BOARD=BOARD_MCB4300"/>
@@ -261,7 +261,7 @@
 								</option>
 								<option id="gnu.c.link.option.libs.495921515" name="Libraries (-l)" superClass="gnu.c.link.option.libs"/>
 								<option id="gnu.c.link.option.paths.692268551" name="Library search path (-L)" superClass="gnu.c.link.option.paths"/>
-								<option id="com.crt.advproject.link.gcc.hdrlib.1209404346" name="Library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.gcc.hdrlib.1209404346" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.fpu.1664439954" name="Floating point" superClass="com.crt.advproject.link.fpu" value="com.crt.advproject.link.fpu.fpv4" valueType="enumerated"/>
 								<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1521825863" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
 									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
@@ -351,7 +351,7 @@
 								</option>
 								<option id="gnu.c.link.option.libs.1973103706" name="Libraries (-l)" superClass="gnu.c.link.option.libs"/>
 								<option id="gnu.c.link.option.paths.909013832" name="Library search path (-L)" superClass="gnu.c.link.option.paths"/>
-								<option id="com.crt.advproject.link.gcc.hdrlib.1101482430" name="Library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.gcc.hdrlib.1101482430" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
 								<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1196932037" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
 									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
 									<additionalInput kind="additionalinput" paths="$(LIBS)"/>